Test Report. The following sample(s) was/were submitted and identified on behalf of the clients as : Mosfet homogeneous materials.

Transcription

1 Test Report. No. Date: 09 Feb Page 1 of 9. XIAN SEMIPOWER ELECTRONIC TECHNOLOGY CO.,LTD. SHENZHEN HANGXIN SEMICONDUCTOR TECHNOLOGY CO., LTD. E101 GLP I-PARK, NO.211,TIANGU 8TH RD., HIGH-TECH ZONE, XI AN ROOM 1504, CYBER TIMES TOWER A,TIANAN CYBER PARK,CHEGONGMIAO INDUSTRIAL AREA,SHENNAN WEST ROAD, SHATOU STREET,FUTIAN DISTRICT, SHENZHEN.. The following sample(s) was/were submitted and identified on behalf of the clients as : Mosfet homogeneous materials. SGS Job No. : CP SZ. Model No. :. TO-251. Client Ref. Info. :. TO-220*,TO-220N,TO-220F*,TO-220SF,TO-220FT, TO-220FTN,TO-251*,TO-252,IPAK*,SIPAK,UIPAK,MIPAK,NIPAK,QIPAK,TO-26 2*,TO-262N,TO-263,TO-264,TO-247,TO-3P,TO-126*,TO-126F,,SOT**,SOP**,E SOP**,DFN** PPAK**. Date of Sample Received :. 01 Feb Testing Period :. 01 Feb Feb Test Requested :. Selected test(s) as requested by client.. Test Method :. Please refer to next page(s).. Test Results :. Please refer to next page(s).. Conclusion :. Based on the performed tests on submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) and Phthalates such as Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl phthalate (DIBP) comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU.. Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch. Echo Yeung. Approved Signatory.

2 Test Report. No. Date: 09 Feb Page 2 of 9. Test Results :. Test Part Description :. Specimen No.. SGS Sample ID. Description. SN1. CAN Copper-colored metal (semi-product). SN2. CAN Solder metal wire (semi-product). SN3. CAN Silvery metal wire (semi-product) 3#. SN4. CAN Black material (semi-product) 4#. SN5. CAN Silvery plated metal (semi-product). SN6. CAN Wafer (semi-product). Remarks :. (1) 1 mg/kg = 1 ppm = %. (2) MDL = Method Detection Limit. (3) ND = Not Detected ( < MDL ). (4) "-" = Not Regulated. RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Test Method :. With reference to IEC :2013+A1:2017, IEC :2013, IEC :2017, IEC :2015 and IEC :2017, analyzed by ICP-OES, UV-Vis and GC-MS.. Test Item(s). Limit. Unit. MDL Cadmium (Cd). 100 mg/kg. 2 ND ND Lead (Pb). 1,000 mg/kg. 2 ND ND Mercury (Hg). 1,000 mg/kg. 2 ND ND Hexavalent Chromium (CrVI). 1,000 mg/kg. 8 ND ND Sum of PBBs. 1,000 mg/kg. - ND ND Monobromobiphenyl. - mg/kg. 5 ND ND Dibromobiphenyl. - mg/kg. 5 ND ND Tribromobiphenyl. - mg/kg. 5 ND ND Tetrabromobiphenyl. - mg/kg. 5 ND ND Pentabromobiphenyl. - mg/kg. 5 ND ND Hexabromobiphenyl. - mg/kg. 5 ND ND Heptabromobiphenyl. - mg/kg. 5 ND ND Octabromobiphenyl. - mg/kg. 5 ND ND Nonabromobiphenyl. - mg/kg. 5 ND ND Decabromobiphenyl. - mg/kg. 5 ND ND

3 Test Report. No. Date: 09 Feb Page 3 of 9. Test Item(s). Limit. Unit. MDL Sum of PBDEs. 1,000 mg/kg. - ND ND Monobromodiphenyl ether. - mg/kg. 5 ND ND Dibromodiphenyl ether. - mg/kg. 5 ND ND Tribromodiphenyl ether. - mg/kg. 5 ND ND Tetrabromodiphenyl ether. - mg/kg. 5 ND ND Pentabromodiphenyl ether. - mg/kg. 5 ND ND Hexabromodiphenyl ether. - mg/kg. 5 ND ND Heptabromodiphenyl ether. - mg/kg. 5 ND ND Octabromodiphenyl ether. - mg/kg. 5 ND ND Nonabromodiphenyl ether. - mg/kg. 5 ND ND Decabromodiphenyl ether. - mg/kg. 5 ND ND Dibutyl phthalate (DBP) mg/kg. 50 ND ND Butyl benzyl phthalate (BBP) mg/kg. 50 ND ND Bis (2-ethylhexyl) phthalate (DEHP) mg/kg. 50 ND ND Diisobutyl Phthalates (DIBP) mg/kg. 50 ND ND Notes :. (1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863.IEC series is equivalent to EN series 37,25. RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Test Method :. With reference to IEC :2013+A1:2017, IEC :2013, IEC :2015, analyzed by ICP-OES and UV-Vis.. Test Item(s). Limit. Unit. MDL Cadmium (Cd). 100 mg/kg. 2 ND ND ND Lead (Pb). 1,000 mg/kg Mercury (Hg). 1,000 mg/kg. 2 ND ND ND Hexavalent Chromium (Cr(VI)). -. µg/cm² ND ND ND Test Item(s). Limit. Unit. MDL Cadmium (Cd). 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (Cr(VI)). -. µg/cm² ND

4 Test Report. No. Date: 09 Feb Page 4 of 9. Notes :. (1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863. IEC series is equivalent to EN series 7,25 (2) = a. The sample is positive for CrVI if the CrVI concentration is greater than 0.13 μg/cm2. The sample coating is considered to contain CrVI b. The sample is negative for CrVI if CrVI is ND (concentration less than 0.10 μg/cm2). The coating is considered a non-crvi based coating c. The result between 0.10 μg/cm2 and 0.13 μg/cm2 is considered to be inconclusive - unavoidable coating variations may influence the determination Information on storage conditions and production date of the tested sample is unavailable and thus Cr(VI) results represent status of the sample at the time of testing.. Remark: The results of Pb(specimen 002) shown are only for reference. Remark :According to the declaration from the client, Lead (Pb) in specimen 002 is exempted by EU RoHS directive 2011/65/EU based on ANNEX III 7(a) : Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead). Remark: Results & photo(s) of 001~006 in this report refer to 001~006 in test report CANEC , CANEC , CANEC , CANEC , CANEC & CANEC

5 Test Report. No. Date: 09 Feb Page 5 of 9. ATTACHMENTS Pb/Cd/Hg/Cr 6+/PBBs/PBDEs Testing Flow Chart 1) Name of the person who made testing: Edith Zhang / Sunny Hu 2) Name of the person in charge of testing: Bella Wang / Qiong Liu 3) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr 6+ and PBBs/PBDEs test method excluded). Sample Preparation Sample Measurement Pb/Cd/Hg PBBs/PBDEs Cr 6+ Acid digestion with microwave / hotplate Solution Filtration Residue 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve Sample solvent extraction Concentration/ Dilution of extraction solution Filtration GC-MS ABS/PC/PVC Others Dissolving by ultrasonication Digesting at 60 C by ultrasonication Nonmetallic material Digesting at 150~160 Separating to get aqueous phase Metallic material Boiling water extraction Adding 1,5- diphenylcarba zide for color development UV-Vis. ICP-OES/AAS ph adjustment Adding 1,5- diphenylcarbazide for color development UV-Vis

6 Test Report. No. Date: 09 Feb Page 6 of 9. ATTACHMENTS Phthalates Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Qiong Liu Sample cutting / preparation Sample Measurement Solvent extraction Concentration/Dilution Filtration GC-MS

7 Test Report. No. Date: 09 Feb Page 7 of 9. Sample photo:. CAN CAN

8 Test Report. No. Date: 09 Feb Page 8 of 9. CAN CAN

9 Test Report. No. Date: 09 Feb Page 9 of 9. CAN CAN SGS authenticate the photo on original report only. *** End of Report ***.