Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R CSM_E39-L_F39-L_E39-S_E39-R_DS_E_3_1. Iron, zinc plating 2

Transcription

1 Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-00 0 Ph: + Fax: 0 info@intechchennai.com Website: Mounting Brackets E-L/F-L Slits/Reflectors E-S/E-R CSM_E-L_F-L_E-S_E-R_DS_E Mounting Brackets Model Fitting materials Count E-L Iron, zinc plating Accessories Applicable sensor Page (mounting pitch on Description Material Count sensor side) Dimensions Hexagonal bolts M Iron, zinc plating (.) (.) E-L Iron, zinc plating Slotted/Phillips screws M Iron, zinc plating E-T () E-L Iron, zinc plating E-L Iron, zinc plating E-L Iron, zinc plating E-L0 Iron, zinc plating E-L Iron, zinc plating E-L E-L E-L Iron, black coating E-L Iron, zinc plating Hexagonal bolts M Nuts M Hexagonal bolts M Slotted/Phillips screws, M (with spring washers) Phillips screws M Nuts M Phillips screws M (with spring washers) Iron, zinc plating Iron, zinc plating Iron, zinc plating EL-DS0E Iron, zinc plating EC-S0 () Iron, zinc plating Iron, zinc plating Iron, zinc plating Plain washer M Iron, zinc plating Phillips screws M 0 (with spring washers) Plain washer M Slotted/Phillips screws M Slotted/Phillips screws M Slotted/Phillips screws M Nuts M Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, nickel plating EL-RC (.) (.) (.) EJK EC- (0) EC- () EC-DS0 () EC-VSG () EC-VSR () EZ pre-wired model (.) EZ pre-wired model (.) EJM (0) E-L Iron, zinc plating EJM (0) E-LV E-L E-L0 E-L E-L E-L E-L S tainles s s teel --- Slotted/Phillips screws M Slotted/Phillips screws M --- Hexagonal bolts M Hexagonal bolts M Hexagonal bolts M Note: Applicable models that appear shaded come wit h the Mounting Brackets at left as accessories E -T V () () () () E-TS E-A0 Iron, zinc plating ES-C (.) Iron, zinc plating ES-C (.) Iron, zinc plating ES-C (.) ES-CR/ (.)

2 E-L/F-L/E-S/E-R Model E-LFH E-LFV E-LH E-LV Fitting materials E-LXY E-L Iron, zinc plating E-L * For installation of Sensor Adjuster E- L E-L E-L E-L0 E-L0 E-L0 E-L0 E-L E-L E-L E-L E-L E-L E-L (SUS) (SUS) E-L-T Iron, zinc plating E-L-T Iron, zinc plating E-L-T Iron, zinc plating Accessories Applicable sensor Page Count (mounting pitch on Description Material Count sensor side) Dimensions Holder (upper) Heat-resistant ABS resin Holder (lower) nylon Pipe Bolts M with Hexagonal Iron, nickel plating holes EZ (.) Bolts M with hexagonal Iron, nickel plating ES-R@/R@ holes /R@/R@ () Phillips screws M E-R/E-R Spring washer M Iron, nickel plating Plain washer M Iron, nickel plating Nuts M Iron, nickel plating Holder nylon EZ (.) Pipe ES-R@/R@ Bolts M with hexagonal holes /R@/R@ () Nuts M E-R/E-R Phillips screws M 0 Iron, zinc plating Nuts M Iron, zinc plating E-TP () Phillips screws M Slotted/Phillips screws M Slotted/Phillips screws M Hexagonal bolts M Hexagonal bolts M Slotted/Phillips screws M Iron, nickel plating E-R Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. ES-R@/R@ () Iron, zinc plating Iron, zinc plating EZ pre-wired model (.) ES-R@/R@ () ES-C (horizontal type) (.) ES-C (vertical type) (.) ES-CR/ (.) EZ pre-wired model (.) E-R (for installation of E-R) (.) E-S-@ () Phillips screws M 0 Iron, zinc plating EMC () Phillips screws M Iron, zinc plating Slotted/Phillips screws M Iron, nickel plating EMC ET-S (/) ET-S (/) ET-S (/) ET-F () ET-F () Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating EC-S0 (.) 0

3 E-L/F-L/E-S/E-R Model E-L E-L E-L E-L Fitting materials Count Accessories Applicable sensor Page Description Material Count (mounting pitch on sensor side) Dimensions Slotted/Phillips screws M Spring washer M EG-R@ () Plain washer M EG-L@ () Nuts M Slotted/Phillips screws M Spring washer M Plain washer M Nuts M Slotted/Phillips screws M Spring washer M Plain washer M Nuts M Slotted/Phillips screws M Spring washer M Plain washer M Nuts M Slotted/Phillips screws M Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. EG-R@ () EG-L@ () EG-MR (T) EG-ML (T) EG-MR (T) EG-ML (T) EZ pre-wired model E-L (.) EX-DA-S/MDA EX-NA E-L None EC-LDA EC-EDA Slotted/Phillips screws M EZ pre-wired model E-L (.) E-L None EX-NA Iron, E-L black coating None --- EZ-G Holder/bracket PBT (polybutylene terephthalate) E-L0 Shaft (brace) EZ (.) Bolt with hexagonal hole (SUSXM) ES-R@/R@ () Nut E-R Phillips screw (SUSXM) Slotted/Phillips screws Holder/bracket PBT (polybutylene terephthalate) E-L Shaft (brace) EZ (.) Bolt with hexagonal hole (SUSXM) ES-R@/R@ () Nut E-R Phillips screw (SUSXM) Slotted/Phillips screws Slotted/Phillips screws M (SUSXM) EZ pre-wired model E-L (.) F-L Iron, zinc plating Phillips screws M Brass, nickel-plated Nuts M Brass, nickel-plated FW-B Phillips screws M Brass, nickel-plated F-L Iron, zinc plating Phillips screws M Brass, nickel-plated Nuts M Brass, nickel-plated FW-B Mounting Spacer Heat-resistant ABS resin F-L Iron, zinc plating FW-A F-L Iron, zinc plating FW-C F-L Iron, zinc plating FW-C Slotted/Phillips screws M Iron, zinc plating F-L Plain washer M Iron, zinc plating FUV-A F-L0 Iron Phillips screws M Iron Nuts M Iron F-L Iron Phillips screws M Iron Nuts M Iron FW-D F-L Iron Phillips screws M Iron FW-D Nuts M Iron Protective fittings

4 Contact Mounting Plates E-L/F-L/E-S/E-R Page Model Material Count Applicable type Dimensions E-L0 PBT (polybutylene terephthalate) Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. Slits Model Slit width Installation procedure Applicable type E-S Width mm Seal type (T) E-S0 Width 0., mm Seal type E-T E-S Width 0.,,, mm E-S 0.-mm dia., mm E-S 0.-mm dia., mm E-SA 0. mm dia. E-SB E-SC E-SD E-SE E-SF -mm dia. -mm dia. Width 0. 0 mm Width 0 mm Width 0 mm Note: Applicable models that appear shaded come with the Slits at left as accessories Plug-in type EZ-T@@ Reflectors (Refer to Dimensions on page.) Name *. 0 or higher for EJM-R and EJK-R. *. 0 or higher for EG-R. Reflectors Non-fogging reflective plate Reflectors Special Reflector for EZM-B Item Model E-R E-RS E-RK E-R E-R E-R0 E-RP Directional angle min. * min. * min. Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection to C 0 to 0 C 0 to 0 C 0 to C 0 to 0 C % to % % to % % to % % to % IEC IP Accessories --- Name Small reflector Tape reflector Item Model E-R E-R E-R E-R-CA E-RS E-RS-CA Directional angle min. to min. min. Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection Accessories --- to C 0 to 0 C 0 to 0 C % to % % to % % to % % to % Mounting Brackets E-L0 (with screws) --- IEC IP Phillips screws M, spring washers M, nuts M E-RS E-RS-CA --- E-RS E-RS-CA Name Laser Reflectors Short-distance transparent object detection Standard Sheets Item Model E-R E-R E-R E-RS E-RS Ambient operating 0 to C (No icing) temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range to 0 C (No icing) to % (No condensation) to % (No condensation)

5 Mounting Bracket Dimensions E-L E-L/F-L/E-S/E-R (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-L Four, R.... Four, R... ± Optical axis...r.. Two, M slotted, hexagonal bolts... Two, dia. E-L. E-L.... (.R) Three,. dia..±0... (.R) R... (R.) E-L E-L Four, R. ±0. R dia. R 0±0... Two, R ± ±0. Two, R R. dia. max. Pushing out height: 0. min. Two, M Two, R. 0 Two, R R. R.±0.. Two,. dia. Two, R R. 0. 0

6 E-L/F-L/E-S/E-R E-L... R. R.. 0 E-L. R.. R.... 0±0. R -M. dia. max. Pushing out height: 0. min. E-L E-L.. R Four, dia R.. Stainless steel R. R R±0. R.. Stainless steel. R R R.±0. dia. E-L. E-L. Two, dia. R EA EA-M EA OA-, OA-N... R... dia.... dia. R. 0 EA, OA-N EA-M, OA-... EA 0±0.. E-LV E-L ± ±

7 E-L/F-L/E-S/E-R E-L0 E-L. ±0. ± Six, R Two, R ± R E-L.. E-L.. (.) E-L

8 E-L/F-L/E-S/E-R E-LFH.. E-LFV.. EZ EZ dia. dia. Two,. dia. 0 Two,. dia. 0. E-LH.. E-LV.. EZ EZ dia. dia. 0 Two,. dia. Two,. dia. 0

9 E-L/F-L/E-S/E-R E-LXY E-L Four, R Pipe (B) Holder (A) 0 0 EZ.... Two, R.. ±0. dia. dia. E-L 0 dia. E-R reflector... Center of pole brace. E-L Note: The E-LXY consists of only the one joint holder (A) and pipe, and the two hexagonal bolts and nuts. It cannot be mounted to the Sensor alone. E-L Mounting Holes Two, M (SUS ) E-L Mounting Holes Two, M Two, R ES-R ±0. An attached screw Four, R. Two, R. 0 (ES-R) dia... ES-R. ±0. An attached screw (SUS ) Four, R. Two, R. (For EZ). (A)* * Mounting Bracket can be attached to side (A) dia. (For ES-B) (For ES-R)

10 E-L/F-L/E-S/E-R E-L0.±0. E-L0 ± ± ±0.. E-L0 R. R.. E-L0 Mounting Holes. (). R R. R. R.. Two, dia.... (.) (SUS) Two, M.. (.).. R R. 0 E-L.. E-L. 0 Two, M Four,. dia... Six, R.. 00 (SUS) R R 0 R 0. 0

11 E-L/F-L/E-S/E-R E-L Nut Plate Three, M (Four, R). (.)... (Two, R.) Two,. (Two, R) (Two, R). E-L Nut Plate Three, M (Two, R.). (Four, R) Two, R.. (Two, R) R max mm-thick R. max (Two, R.) (Two, R.)..-mm-thick.... (Two, R.) () 0 (.) Two,. (Two, R.) E-L Nut Plate Three, M (Four, R) E-L (Two, R.).. Four, M Tap processing.. ()..-mm-thick Two,. (Two, R.).. (Four, R).-mm-thick E-L... Four, M Tap processing. (.) E-L-T E-L-T E-L-T.. A. Four, dia. (Mounting bracket holes) 0 Four, M. (Mounting sensor screws)...-mm-thick.. Two, dia. A+ Model Dimension A (mm) E-L-T 0 E-L-T E-L-T

12 E-L/F-L/E-S/E-R E-L Two, R.... E-L. 0 ±. R ±0.. -R Four, R.... Two, R Two, R R. R. ±0. ±0.. 0 ±. Four, R. Two,. dia..... Two, R R. dia. E-L. Two, R E-L. 0 0 ± R Two, R Two,. dia. ±0.. Two, R. Eight,.. ±0. -. Four, R. 0 R.. Two, R. R R. R. 0 ± R. Fourteen, R. E-L E-L.. Four,.-dia. holes. (0.) R max... Two, dia. Four, R..

13 E-L/F-L/E-S/E-R E-L E-L Two, R Two, 0 R. R. max.. Four, R.. Four, R.... Two, dia.... Two, R E-L. Four,. dia. E-L0 E-L.. Two,. Polybutylene terephthalate... Four, R 0. Two,. dia. 0 dia L Two,. dia. (SUS ). Polybutylene terephthalate Length (mm) Model L E-L0 E-L E-L F-L. Two, R. Four,.. - Eight, R. Four,.-dia. holes Four, R

14 E-L/F-L/E-S/E-R F-L F-L Four, R. Two,.-dia. holes... Two, R.... Four, R. 0 0 R 0.. Three, dia. holes Minimum R F-L C Type (Receiver, Top) Two, dia.. F-L D Type (Receiver, Bottom) Two, dia.... Two, dia. 0 Two, dia. Four, dia.... Two, dia. Two,. dia.. dia. F-L A Type (Emitter, Top) dia.. F-L B Type (Emitter, Bottom). dia. Two, dia. Two, dia.... dia Two, dia. Two, dia.. Two, dia.... dia. F-L C Type (Receiver, Top) dia.. Two, dia. F-L D Type (Receiver, Bottom) dia Two, dia... dia..... Two, dia.... dia.... Two, dia. Two, dia.

15 E-L/F-L/E-S/E-R F-L F-L0 (L-shaped) 0. Two, R. Two, R R. ±0. Two, R.. ± ±. Four, mounting holes 0 0. Two, R. R. (SUS-CP) iron (t = mm) * mounting screws included 0.. Four,. dia. F-L (Flat) F-L (Receiver) iron (t = mm) * mounting screws included Note: The Receiver sees a mirror-image of the Emitter. Five, 0 dia Four, mounting holes iron (t = mm) * mounting screws included Four,. dia Two,. dia.... Contact Mounting Plate E-L0 (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified.. () dia. PBT (polybutylene terephthalate). dia.

16 Reflector dimensions E-R E-RS E-RK * E-R E-L/F-L/E-S/E-R (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-R... () Two,. dia. Material, reflective surface: acrylic Rear surface: ABS 0.. Four,. dia. Material, reflective surface: acrylic Rear surface: ABS 0... Material, reflective surface: acrylic Rear surface: ABS E-R0. Two,. dia (.). * E-RK only Coating on reflective surface.... Material, reflective surface: acrylic Rear surface: ABS 0. 0 Two, dia... E-R E-R. E-R.. Material, reflective surface: acrylic Rear surface: ABS R Adhesive tape side Two, dia. Material, reflective surface: acrylic Rear surface: ABS E-R-CA Mounting bracket.. Two,. dia.. Reflector. Eight, R. 0.. (.) Material, reflective surface: acrylic Rear surface: ABS Two,... R. M Stainless steel Two,. dia. Mounting plate: stainless steel (SUS) Reflective surface: acrylic Two, R. Mounting Bracket: t 0. Reflector: t0. (adhesive tape side) Note: The reflective plate and mounting plate () come as a set... Retroreflector for EZM-B E-RP Reflector Two,. dia.

17 E-L/F-L/E-S/E-R E-RS E-RS-CA E-RS E-RS-CA 0. Acrylics 0 Four, R Adhesive tape side 0 0. E-RS E-RS-CA Acrylics Four, R Adhesive tape side Acrylics Four, R Adhesive tape side E-R/R. E-R. Four, R. Four, R. Four, R Four, R R. Two,. dia. R. R Two,. dia.. R E-RS 0. E-RS 0 0. Adhesive tape side Adhesive tape side Sensitivity Adjuster E-G (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified.. dia. dia. Polycarbonate Sensitivity Adjustment Driver E-G dia. 0. (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. (.) dia. Polycarbonate

18 E-L/F-L/E-S/E-R Protective Cover (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-G. 0. Polycarbonate Lens Unit (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-FV 0.-dia. hole. dia. M. 0. Effective depth:. Countersunk with straight edge, depth: 0. Connection Sockets (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. Front Connection Socket PFA Eleven, M. Sems screw Terminal arrangement/internal connections (top view) Mounting Holes 0 Two, M or. dia. max.. ±0. max.. max. Note: Rail mounting also possible. Front Connection Socket Terminal arrange ment/internal connections (top view) Two,. mounting holes Eight, M Two, M or M Mounting Holes. PYF0A Sems screw or. dia. max.. ±0. max.. max. ±0. Note: Rail mounting also possible. Front C onnection S ocket PY0 Eight,. ellipse hole Terminal arrangement/internal connections (bottom view) Mounting Holes PCB Cutout Dimensions... max.. max.. ± max... max Eight,. dia. holes Authorised Distributors:- Intech Systems Chennai Pvt. Ltd S-, Guindy Industrial Estate, Chennai-00 0 Ph: + Mob: Fax: 0 info@intechchennai.com Website: