PRODUCT INFORMATION. Elettromedia - October All specifications subject to change without notice_12.

Transcription

1 PROUT INFORMTION Elettromedia - October

2 Product Information Elettromedia - October 2012 Energy: Evolution of esign and Technology 03 Technical features 04 omp 06 oax 13 System 17 Grille 27 bout us 28 Press Kit 29 For more information visit

3 Energy: Evolution of esign and Technology Hertz is proud to introduce the fifth revision of the Energy line; once again increasing its reliability and efficiency which, since the beginning, marked its success! Each new release has been a further evolution; starting from the experience and the know-how acquired with the previous project. With each refinement the Hertz Team introduced innovations, both in terms of technology and design, widening the gap within this competitive market segment. The Energy.5 line refines features that were introduced with the.4 version, becoming even more high-performance as well as more installation-friendly in standard OEM placements. Each Energy.5 component was developed with the purpose of optimizing the overall size: an accurate study of the woofers profile led to more compact baskets and motor assemblies, while for the coaxials, making sure the tweeter did not protrude past the height of the woofer s surround, thus reducing installation problems relating to flush factory grille assemblies coming into contact with the tweeter in traditional designs. The research carried out on the limited installation depth in particular vehicles offered the opportunity to introduce into the product catalogue a new component, the EV F165.5, a flat-profile woofer which requires only 51 mm (2 in.) of depth to be installed. The evolution of the new Energy line also turned into a line with improved frequency response, both in terms of linearity as well as amplitude. The Hertz staff created a new, more rigid cone, optimizing the voice coil and the motor assembly. lso introduced is an innovation in the tweeter design, contributing to the excellent frequency response. new, powerful 100 mm (4in.) mid-low range component, the EMV 100.5, has been added to the Energy.5 line, able to reproduce a wide frequency range from 80 Hz to 7,5 khz! With regards to the design, elements characterising the previous line have been further refined, mixing them with those of the most recent Hertz products: the embossed areas of the previous cone are now more visible and emphasized; the dominant colour is black, which best matches the look of the modern car interior components. The Energy.5 line boasts an aggressive design, conveying a contemporary, refined feeling. In order to satisfy the requests coming from the market, the grilles supplied with the component systems, can now also be purchased separately. Three are the available sizes (100 mm, 130 mm and 165 mm). The grille is entirely configurable; it can be mounted without the mesh for those who prefer a highlighted installation, or with the mesh for a more subdued presentation. The unique three piece design lends itself to easy refinishing for those who wish to customize every detail. 3

4 Technical features OMP. The Energy woofers have extreme control relating to sound quality, ensured through the use of an over-sized motor along with a membrane which can ensure linear movements. They provide solid bass and clear, dynamic mid frequencies. The technical solutions adopted in the previous.4 version are merged with refinements; the surface ribbings are now deeper, thus increasing rigidity and, together with the proprietary V-cone, ensure perfectly symmetrical movement of the membrane. The IN size basket, the lower profile gasket as well as the compact size make Energy.5 the ideal component to be installed in any factory system. The natural rubber protection ring plays an important role, preventing the basket and motor assembly from corrosion and cosmetic damage, while at the same time increasing the acoustic damping of the basket and mobile assembly. The woofer range widens with the introduction of the EV F165.5, a component designed for those who don t want to give up on high performance, even when presented with limited depth. lso the EV 165L.5, a mid-bass specifically designed for low frequency reproduction has been renewed its high-excursion motor assembly and its original non-pressed paper cone provide the ability to get powerful, solid bass from the front doors, even without the support of a subwoofer. The ET 26.5 tweeter is an entirely new project: as the name itself implies, its size is now larger, but the most remarkable evolution concerns its internal geometry.the Tetolon dome is now wider, with no increase in depth. Positioned on top of the dome is an annular acoustic lens. This acoustic phase coupler provides passive equalization on the diaphragm, controlling dispersion and optimizing the off-axis Energy, thus noticeably increasing its level as well as the frequency response linearity. very powerful, high-performance mid-range, the EMV has been added to the Energy.5 range. It can reproduce a very wide frequency range; with its compact depth and overall small footprint it can be installed in spaces inaccessible up to now, maintaining a wide, linear response and very high efficiency. mong the Energy components, there are also the two passive crossovers available; the X and X 300.5, models of reliability and versatility. 4

5 OX. For those looking for maximum sound linearity, off-axis response and timber quality, the Energy coaxials are the best available solution in their class. Just like with the woofers, the membrane evolution, the installation friendliness, as well as an accurately tuned motor assembly make these components even more high-performance, all the while occupying a smaller space. The RHF, Rotary High Frequency ontour, technology introduced in the previous line, has now gone through a further progression: the tweeter position has been angled a further 10. This refinement, along with rotation, provides the ability to control dispersion as well as getting close to the ideal frequency response. y orienting the tweeter towards the listening point, you can obtain a frequency response optimised for off-axis listening which, until now, negatively affected the in-car listening experience. The EX 690, the three-way coaxial, features a dome tweeter as well as a Mylar super-tweeter with built-in crossover providing maximum efficiency and extended high frequency response. 5

6 ET W omponent - Tweeter iaphragm mm (in.) 26 (1) Power handling W peak W continuous 150 (Hi-Pass 3,5 khz - 12 d Oct.) Frequency response Hz 2k 23k Sensitivity d SPL 92 Magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Voice coil Ø mm (in.) 20 (0.8) Magnet - Neodymium ome - Tetolon Weight of one kg (lb.) 0,03 (0.07) component 1. Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequency tones. 7. Mounting accessories for external or embedded mounting included Electro-coustic Parameters mm 20 Re Ω 3,7 Fs Hz 1350 Le mh 0,02 Vas l - Mms g 0,19 ms mm/n 0,07 L T m 1,5 Qts - 0,9 Qes - 2,7 Qms - 1,5 Spl d 92 SPL 2.83V,1m, half space Impedance (Ohm) Frequency (HZ) on axis 45 off axis impedance MOUNTING ESSORIES 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. K SPL 2.83V,1m, half space K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in S J R T Elettromedia Potenza Picena (M) Italy - T F Impedance (Ohm) 6

7 EMV W omponent - Midwoofer Size mm (in.) 100 (4) Power handling W peak 120 W continuous 40 Frequency response Hz 80 7,5k Sensitivity d SPL 91 Magnet size d h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite one - Water repellent pressed paper Weight of one component kg (lb.) 0,45 (0.99) Electro-coustic Parameters mm 88 Xmax mm 1,5 Re Ω 3 Fs Hz 104 Le mh 0,15 Vas l 2,3 Mms g 5,3 ms mm/n 0,44 L T m 3,5 Qts - 0,68 Qes - 0,87 Qms - 3,1 Spl d V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. SPL 2.83V,1m, half space EMV Impedance (Ohm) mm 4 in mm 5.12 in. 93 mm 3.66 in. 49 mm 1.93 in. 44 mm 1.73 in. 60 EV Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F

8 EV W omponent - Woofer Size mm (in.) 130 (5) Power handling W peak 150 W continuous 50 Frequency response Hz 70 6k Sensitivity d SPL 93 Magnet size d h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite one - Water repellent pressed paper Weight of one component kg (lb.) 0,7 (1.54) Electro-coustic Parameters mm 110 Xmax mm 3 Re Ω 3,1 Fs Hz 82 Le mh 0,18 Vas l 6,05 Mms g 7,9 ms mm/n 0,47 L T m 4 Qts - 0,68 Qes - 0,8 Qms - 4,6 Spl d mm 5.12 in mm 5.9 in. 119 mm 4.68 in. 57 mm 2.24 in. 50 mm 1.96 in. 1. V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. SPL 2.83V,1m, half space EV Frequency (HZ) Elettromedia Potenza Picena (M) Italy - T F on axis 45 off axis impedance Impedance (Ohm) 8

9 EV W omponent - Woofer Size mm (in.) 165 (6.5) Power handling W peak 210 W continuous 70 Frequency response Hz 60 5k Sensitivity d SPL 93,5 Magnet size d h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite one - Water repellent pressed paper Weight of one component kg (lb.) 0,96 (2.12) Electro-coustic Parameters mm 134 Xmax mm 3 Re Ω 3,1 Fs Hz 70 Le mh 0,18 Vas l 10,4 Mms g 13,7 ms mm/n 0,37 L T m 5 Qts - 0,61 Qes - 0,76 Qms - 3,2 Spl d 93,5 1. V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. SPL 2.83V,1m, half space EV Impedance (Ohm) mm 6.5 in. 142 mm 5.6 in. 72 mm 2.83 in. 65 mm 2.56 in. 2.83V,1m, half space Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F Impedance (Ohm) 9

10 EV 165L W omponent - Woofer Size mm (in.) 165 (6.5) Power handling W peak 210 W continuous 70 Frequency response Hz 50 4k Sensitivity d SPL 92 Magnet size d h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.7) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite one - Water repellent non-pressed paper Weight of one component kg (lb.) 0,98 (2.16) Electro-coustic Parameters mm 134 Xmax mm 4 Re Ω 3,3 Fs Hz 65 Le mh 0,21 Vas l 11 Mms g 14,8 ms mm/n 0,38 L T m 4,8 Qts - 0,72 Qes - 0,88 Qms - 3,8 Spl d V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output. 3. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 4. Large motor assembly for excellent mobile voice coil control. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. SPL 2.83V,1m, half space Impedance (Ohm) mm 6.5 in. 142 mm 5.6 in. 72 mm 2.83 in. 65 mm 2.56 in Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F m, half space (Ohm)

11 ULTR flat EV F W omponent - Woofer Size mm (in.) 165 (6.5) Power handling W peak 180 W continuous 60 Frequency response Hz 65 4k Sensitivity d SPL 93,5 Magnet size d h mm (in.) 90 x 32 x 10 (3.55 x 1.26 x 0.4) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite one - Water repellent pressed paper Weight of one component kg (lb.) 0,71 (1.57) Electro-coustic Parameters mm 134 Xmax mm 3 Re Ω 2,7 Fs Hz 80 Le mh 0,14 Vas l 9,4 Mms g 12 ms mm/n 0,33 L T m 3,9 Qts - 0,8 Qes - 1 Qms - 3,4 Spl d 93,5 1. Shallow profile for an easy replacement of factory speakers. 2. V-cone for best off-axis response and clear mid-high frequency detail. 3. Water-repellent treated paper cone, butyl rubber surround. 4. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 5. Large motor assembly for excellent mobile voice coil control. 6. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. SPL 2.83V,1m, half space EV F Impedance (Ohm) ,5 mm 6.51 in. 139 mm 5.47 in. 51 mm 2 in. 43 mm 1.7 in Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F

12 EX W omponent - Two way coaxial Woofer size mm (in.) 100 (4) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 120 W continuous 40 Frequency response Hz 80 23k Sensitivity d SPL 92 Magnet size d h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 0,47 (1.04) Electro-coustic Parameters mm 88 Xmax mm 2 Re Ω 3 Fs Hz 102 Le mh - Vas l 2,5 Mms g 4,8 ms mm/n 0,52 L T m 3,5 Qts - 0,61 Qes - 0,76 Qms - 3,1 Spl d mm 4 in mm 5.12 in. 93 mm 3.66 in. 58 mm 2.28 in. 44 mm 1.73 in. 1. Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. IN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. urve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHF, Rotary High Frequency ontour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position. SPL 2.83V,1m, half space Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F Impedance (Ohm) 12

13 EX W omponent - Two way coaxial Woofer size mm (in.) 130 (5) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 150 W continuous 50 Frequency response Hz 70 23k Sensitivity d SPL 93 Woofer Magnet size d h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 0,73 (1.61) Electro-coustic Parameters mm 110 Xmax mm 3 Re Ω 3,1 Fs Hz 82 Le mh - Vas l 6,3 Mms g 7,6 ms mm/n 0,49 L T m 4 Qts - 0,62 Qes - 0,75 Qms - 3,8 Spl d mm 5.12 in mm 5.9 in. 119 mm 4.68 in. 69 mm 2.72 in. 50 mm 1.96 in. 1. Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. IN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. urve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHF, Rotary High Frequency ontour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position. SPL 2.83V,1m, half space Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F Impedance (Ohm) 13

14 EX W omponent - Two way coaxial Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 210 W continuous 70 Frequency response Hz 60 23k Sensitivity d SPL 94 Woofer Magnet size d h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 1 (2.2) Electro-coustic Parameters mm 134 Xmax mm 3 Re Ω 3,1 Fs Hz 72 Le mh - Vas l 12 Mms g 12,7 ms mm/n 0,4 L T m 4,9 Qts - 0,58 Qes - 0,72 Qms - 3,1 Spl d Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. IN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. urve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHF, Rotary High Frequency ontour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position. SPL 2.83V,1m, half space EX Impedance (Ohm) 165 mm 6.5 in. 142 mm 5.6 in. 76 mm 3 in. 65 mm 2.56 in Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F

15 EX W omponent - Two way coaxial Woofer size mm (in.) (5 x 7) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 210 W continuous 70 Frequency response Hz 60 23k Sensitivity d SPL 94 Woofer Magnet size d h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 1 (2.2) Electro-coustic Parameters mm 139 Xmax mm 3 Re Ω 3,1 Fs Hz 76,5 Le mh - Vas l 10,5 Mms g 13,5 ms mm/n 0,32 L T m 4,9 Qts - 0,67 Qes - 0,84 Qms - 3,2 Spl d 94 SPL 2.83V,1m, half space 1. Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. IN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. urve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHF, Rotary High Frequency ontour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position Impedance (Ohm) mm 8.7 in mm 5.5 in mm 7.16 in mm 4.96 in. 76 mm 3 in. 65 mm 2.56 in. Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F

16 EX W omponent - Three way coaxial Woofer size mm (in.) (6 x 9) Tweeter diaphragm mm (in.) 40 (1.58) Supertweeter diaphragm mm (in.) 15 (0.6) Power handling W peak 300 W continuous 100 Frequency response Hz 40 23k Sensitivity d SPL 95 Woofer Magnet size d h mm (in.) 100 x 45 x 17 (4 x 1.8 x 0.7) Woofer Voice coil Ø mm (in.) 25 (1.0) Tweeter Voice coil Ø mm (in.) 20 (0.78) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Supertweeter dome - PEI Weight of one component kg (lb.) 1,55 (3.42) 1. Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. IN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. urve memory Nomex spider for consistent, reliable performance. 11. ome-cone tweeter with high energy neodymium magnet combined with a mylar supertweeter. The best possible efficiency and high frequency extension. *Grille included Electro-coustic Parameters mm 171 Xmax mm 3,5 Re Ω 3,3 Fs Hz 59 Le mh - Vas l 29 Mms g 18,8 ms mm/n 0,38 L T m 5 Qts - 0,73 Qes - 0,91 Qms - 3,7 Spl d SPL 2.83V,1m, half space mm 9.35 in mm 6.35 in mm 8.8 in mm 5.95 in. 96 mm 3.8 in. 79 mm 3.1 in E1 263 mm in. E2 190 mm 7.5 in. F 26 mm 1 in Frequency (HZ) on axis 45 off axis impedance Elettromedia Potenza Picena (M) Italy - T F E1 F E Impedance (Ohm) 16

17 ESK W omponent - Two way system Woofer size mm (in.) 130 (5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 225 W continuous 75 Frequency response Hz 70 23k Sensitivity d SPL 93 Woofer magnet size d h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Tweeter magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent pressed paper Tweeter dome - Tetolon rossover type - 3 khz - 6/12 d Oct. omponent adjustment d +2; 0; -2 Woofer weight of one component kg (lb.) 0,7 (1.54) Tweeter weight of one component kg (lb.) 0,03 (0.07) rossover weight of one component kg (lb.) 0,17 (0.37) ET Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequenc tones. Electro-coustic Parameters Tweeter Woofer mm Xmax mm - 3 Re Ω 3,7 3,1 Fs Hz Le mh 0,02 0,18 Vas l - 6,05 Mms g 0,19 7,9 ms mm/n 0,07 0,47 L T m 1,5 4 Qts - 0,9 0,68 Qes - 2,7 0,8 Qms - 1,5 4,6 Spl d EV V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. * Tweeter mounting accessories and woofer grille included. Elettromedia Potenza Picena (M) Italy - T F

18 ESK W 130 mm 5.12 in mm 5.9 in. 119 mm 4.68 in. 57 mm 2.24 in. 50 mm 1.96 in. E E 164 mm 6.45 in. F 24 mm 0.94 in. F 3 G 102,5 mm 4.03 in. H 82 mm 3.23 in. I 34 mm 1.34 in. G I 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. H K J K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in. R S T 18

19 ESK W omponent - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 300 W continuous 100 Frequency response Hz 60 23k Sensitivity d SPL 93,5 Woofer magnet size d h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.5) Tweeter magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent pressed paper Tweeter dome - Tetolon rossover type - 3 khz - 6/12 d Oct. omponent adjustment d +2; 0; -2 Woofer weight of one component kg (lb.) 0,96 (2.12) Tweeter weight of one component kg (lb.) 0,03 (0.07) rossover weight of one component kg (lb.) 0,17 (0.37) Electro-coustic Parameters Tweeter Woofer mm Xmax mm - 3 Re Ω 3,7 3,1 Fs Hz Le mh 0,02 0,18 Vas l - 10,4 Mms g 0,19 13,7 ms mm/n 0,07 0,37 L T m 1,5 5 Qts - 0,9 0,61 Qes - 2,7 0,76 Qms - 1,5 3,2 Spl d 92 93,5 ET Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequenc tones. EV V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. *Tweeter mounting accessories and woofer grille included. Elettromedia Potenza Picena (M) Italy - T F

20 ESK W ESK W 165 mm 6.5 in. 142 mm 5.6 in. 72 mm 2.83 in. 65 mm 2.56 in. ESK 165L W G 102,5 mm 4.03 in. H 82 mm 3.23 in. I 34 mm 1.34 in. E F E 184 mm 7.25 in. F 25 mm 0.98 in. G I H ESK F W 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in. K J R S T ESK 163L W 20

21 ESK 165L W omponent - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 300 W continuous 100 Frequency response Hz 50 23k Sensitivity d SPL 92 Woofer magnet size d h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.7) Tweeter magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent non-pressed paper Tweeter dome - Tetolon rossover type - 3 khz - 6/12 d Oct. omponent adjustment d +2; 0; -2 Woofer weight of one component kg (lb.) 0,98 (2.16) Tweeter weight of one component kg (lb.) 0,03 (0.07) rossover weight of one component kg (lb.) 0,17 (0.37) Electro-coustic Parameters Tweeter Woofer mm Xmax mm - 3 Re Ω 3,7 3,3 Fs Hz Le mh 0,02 0,21 Vas l - 11 Mms g 0,19 14,8 ms mm/n 0,07 0,38 L T m 1,5 4,8 Qts - 0,9 0,72 Qes - 2,7 0,88 Qms - 1,5 3,8 Spl d ET Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequenc tones. EV 165L.5 1. V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output. 3. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 4. Large motor assembly for excellent mobile voice coil control. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. * Tweeter mounting accessories and woofer grille included. Elettromedia Potenza Picena (M) Italy - T F

22 ESK 165L W 165 mm 6.5 in. 142 mm 5.6 in. 72 mm 2.83 in. 65 mm 2.56 in. E E 184 mm 7.25 in. F 25 mm 0.98 in. F G 102,5 mm 4.03 in. H 82 mm 3.23 in. I 34 mm 1.34 in. G I 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. H K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in. K J R S T 22

23 ESK F W omponent - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 270 W continuous 90 Frequency response Hz 65 23k Sensitivity d SPL 93,5 Woofer magnet size d h mm (in.) 90 x 32 x 10 (3.55 x 1.26 x 0.4) Tweeter magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent pressed paper Tweeter dome - Tetolon rossover type - 3 khz - 6/12 d Oct. omponent adjustment d +2; 0; -2 Woofer weight of one component kg (lb.) 0,71 (1.57) Tweeter weight of one component kg (lb.) 0,03 (0.07) rossover weight of one component kg (lb.) 0,17 (0.37) ET Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequenc tones. Electro-coustic Parameters Tweeter Woofer mm Xmax mm - 3 Re Ω 3,7 2,7 Fs Hz Le mh 0,02 0,14 Vas l - 9,4 Mms g 0,19 12 ms mm/n 0,07 0,33 L T m 1,5 3,9 Qts - 0,9 0,8 Qes - 2,7 1 Qms - 1,5 3,4 Spl d 92 93,5 EV F Shallow profile for an easy replacement of factory speakers. 2. V-cone for best off-axis response and clear mid-high frequency detail. 3. Water-repellent treated paper cone, butyl rubber surround. 4. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 5. Large motor assembly for excellent mobile voice coil control. 6. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. * Tweeter mounting accessories and woofer grille included. Elettromedia Potenza Picena (M) Italy - T F

24 ESK 165L W ESK F W 165,5 mm 6.51 in. 139 mm 5.47 in. 51 mm 2 in. 43 mm 1.7 in. E E 184 mm 7.25 in. F 25 mm 0.98 in. F ESK 163L W G 102,5 mm 4.03 in. H 82 mm 3.23 in. I 34 mm 1.34 in. G I H 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. K J R S T K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in. 24

25 ESK 163L W omponent - Three way system Woofer size mm (in.) 165 (6.5) Midwoofer size mm (in.) 100 (4) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 375 W continuous 125 Frequency response Hz 50 23k Sensitivity d SPL 92 Woofer magnet size d h mm (in.) 85 x 32 x 17 (3.55 x 1.26 x 0.7) Midwoofer magnet size d h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Tweeter magnet size d h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Midwoofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Midwoofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent non pressed paper Midwoofer cone - Water repellent pressed paper Tweeter dome - Tetolon rossover type 600 Hz - 12/6 d Oct. 6 khz - 6/12 d Oct. omponent adjustment d +2; 0; -2 Woofer weight of one component kg (lb.) 0,98 (2.16) Midwoofer weight of one component kg (lb.) 0,45 (0.99) Tweeter weight of one component kg (lb.) 0,03 (0.07) rossover weight of one component kg (lb.) 0,42 (0.93) Electro-coustic Parameters Tweeter Midwoofer Woofer mm Xmax mm - 1,5 3 Re Ω 3,7 3 3,3 Fs Hz Le mh 0,02 0,15 0,21 Vas l - 2,3 11 Mms g 0,19 5,3 14,8 ms mm/n 0,07 0,44 0,38 L T m 1,5 3,5 4,8 Qts - 0,9 0,68 0,72 Qes - 2,7 0,87 0,88 Qms - 1,5 3,1 3,8 Spl d ET Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. coustic compression chamber; high efficiency and off-axis optimized response. 3. W (opper lad luminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. amping material; controlling acoustic resonances insuring clear, high frequenc tones. EMV V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. EV 165L.5 1. V-cone for best off-axis response and clear mid-high frequency detail. 2. Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output. 3. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 4. Large motor assembly for excellent mobile voice coil control. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. IN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. urve memory Nomex spider for consistent, reliable performance. * Tweeter mounting accessories and woofer grille included. Elettromedia Potenza Picena (M) Italy - T F

26 ESK 163L W 165 mm 6.5 in. 142 mm 5.6 in. E 72 mm 2.83 in. 65 mm 2.56 in. F E 184 mm 7.25 in. F 25 mm 0.98 in. 103 mm 4 in mm 5.12 in. 93 mm 3.66 in. 49 mm 1.93 in. 44 mm 1.73 in. 3 E F E 141 mm 5.55 in. F 22 mm 0.86 in. G G 138,5 mm 5.45 in. H 109,8 mm 4.32 in. I I 41 mm 1.61 in. H 44 mm 1.7 in. 38,5 mm 1.5 in. 20 mm 0.78 in. 8,5 mm 0.33 in. K J R T S K 28,3 mm 1.11 in. J 44,3 mm 1.75 in. R 48 mm 1.89 in. S 10 mm 0.4 in. T 10 mm 0.4 in. 26

27 EG EG EG EG EG EG E 141 mm 5.55 in. 164 mm 6.45 in. 184 mm 7.25 in. F 22 mm 0.86 in. 24 mm 0.94 in. 25 mm 0.98 in. These grilles can be fully disassembled and are especially designed to be customized and used in one of three different combinations. E F Elettromedia Potenza Picena (M) Italy - T F

28 OUT US Elettromedia, an Italian company, is a leader within the world-wide car Hi-Fi market. orn in 1987 in Potenza Picena by a group of friends who shared the same passion for in-car high fidelity, throughout the past years Elettromedia has been walking the path of excellence: its products are distributed in more than 50 countries; the company has received many awards and acknowledgements from the most authoritative leaders within the car audio industry; it also can boast reviews of more than 3000 pages published in 30 different languages (visit: The Elettromedia brands are udison, Hertz, onnection and Zaudiocomp. Through a co-branding strategy, the company offers all of the components required for a complete, top-level car audio system. ONTTS: Elettromedia s.r.l. Strada Regina km 3, Potenza Picena (Mc) - Italy T F WRS 28

29 Press Kit ( Press Room) Energy Product Information (PF version, 150 dpi resolution) Logos: Hertz, Energy, V-cone, ompact Size, Ultra Flat, RHF (dobe Illustrator version, 300 dpi resolution) Photos (JPG version, 300 dpi resolution) ET 26.5 EMV EV EV EV 165L.5 EV F165.5 EX EX EX EX EX

30 ESK ESK ESK 165L.5 ESK F165.5 ESK 163L.5 Technologies Elettromedia_Headquarter 30