李志偉著作目錄 ( ) SCI/EI 期刊論文

Transcription

1 SCI/EI 期刊論文 李志偉著作目錄 ( ) 1. Yueh-Chien Lee, Sheng-Yao Hu, Walter Water, Kwong-Kau Tiong, Zhe-Chuan Feng, Yen-Ting Chen, Jen-Ching Huang, Jyh-Wei Lee, Chia-Chih Huang, Jyi-Lai Shen, Mou-Hong Cheng, 2009, "Rapid thermal annealing effects on the structural and optical properties of ZnO films deposited on Si substrates", Journal of Luminescence, Vol.129, pp ( ). 2. Kun Ling Wu,Biing Hwa Yan, Jyh-Wei Lee, Chun Gian Ding, 2009, "Study on the characteristics of electrical discharge machining using dielectric with surfactant", Journal of materials processing technology, Vol. 209, pp (2009, 03). 3. Yin-Yu Chang, Shun-Jan Yang, Weite Wu, Yu-Chu Kuo, Jyh-Wei Lee, Chaur-Jeng Wang, 2009, Mechanical properties of gradient and multilayered TiAlSiN hard coatings, Thin Solid Films, Vol.517, pp ( ). 4. Chi-Lung Chang, Jyh-Wei Lee, Ming-Don Tseng, 2009,"Microstructure, corrosion and tribological behaviors of TiAlSiN coatings deposited by cathodic arc plasma deposition", Thin Solid Films, Vol. 517, pp ( ). 5. Jiing-Herng Lee, Pi-Chuen Tsai, Jyh-Wei Lee, 2009, "Cyclic Oxidation Behavior and Microstructure Evolution of Aluminized, Pt-aluminized HVOF Sprayed CoNiCrAlY coatings", Thin Solid Films, Vol. 517, pp ( ). 6. Ching-Hsing Lin, Chen-Yu Chang, Yu-Jie Chang, Jyh-Wei Lee, Mei-Yin Hwa, Yao-Chuan Lee, 2009,"Glass fibers covered with TiO 2 thin films by sol-gel method as a photocatalyst reactor to degradation toluene", Advanced Materials Research, Vol , pp (EI) ( ). 7. Jyh-Wei Lee, Zhi-Fan Zeng, Chaur-Jeng Wang,2009,"The effect of heat treating on the microstructure and mechanical properties of Cr-Cu-N nanocomposite thin films", Advanced Materials Research, Vol.79-82, pp (EI) ( ). 8. Yung-I Chen, Li-Chun Chang, Jyh-Wei Lee, Chih-Hsiung Lin, 2009,"Annealing and Oxidation Study of Mo-Ru Hard Coatings on Tungsten Carbide", Thin Solid Films, Vol. 518, pp ( ). 9. Chia-Lin Li, Fan-Bean Wu, Jyh-Wei Lee, Yan-Zuo Tsai, Li-Chun Chang, 2009, "Characteristics of Cr 2 N/Cu multilayered thin films with different bilayer thickness", Surface and Coatings Technology, Vol.204, pp ( ). 10. Chia-Lin Li, Yu-Ting Lin, Jyh-Wei Lee, 2009, "Mechanical Properties Evaluation of Chromized Tungsten Carbide-Cobalt Hardmetals", Surface & Coatings Technology, Vol.204, pp ( ).

2 11. Chen-Yu Chang, Yao-Chuan Lee, Ching-Hsing Lin, Jyh-Wei Lee, Yu-Jie Chang, Jian-Huan Chen, 2010, "Degradation of volatile acetone by a photocatalytic reactor with TiO 2 coated sieve", Advanced Materials Research, Vol , pp (EI) ( ). 12. Y. C. Lee, C. S. Yang, H. J. Huang, S. Y. Hu, Jyh-Wei Lee, C. F. Cheng, C. C. Huang, M. K. Tsai, H. C. Kuang, 2010, " Structural and optical properties of ZnO nano powder prepared by microwave-assisted synthesis", Journal of Luminescence, Vol.130, pp ( ). 13. Hsin-Han Lin, Chau-Chang Chou, Jyh-Wei Lee, 2010,"Tribological Properties of Cr-Si-N Nanocomposite Film Adherent Silicon under Various Environments", Thin Solid Films, Vol. 518, pp ( ). 14. Yu-Jie Chang, Chia-Lin Li, Jyh-Wei Lee, Fan-Bin Wu, Li-Chun Chang, 2010, "Evaluation of antimicrobial abilities of Cr 2 N/Cu multilayered thin films", Thin Solid Films, Vol. 518, pp ( ). 15. Chien-Ming Kao, Jyh-Wei Lee, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, Shin-Pei Chen, 2010, "Microstructures and Mechanical Properties Evaluation of TiAlN/CrSiN Multilayered Thin Films with Different Bilayer Periods ", Surface and Coatings Technology, Vol.205, pp ( ). 16. Hsiu-Min Lin, Jenq-Gong Duh, Ronghua Wei, Christopher Rincon, Jyh-Wei Lee, 2010, "The Effect of Microstructure and Composition on Mechanical properties in Thick-layered Nanocomposite Ti-Si-C-N Coatings", Surface and Coatings Technology, Vol.205, pp ( ). 17. Jyh-Wei Lee, Shih-Tien Chang, Hsien-Wei Chen, Chi-Hong Chien, Jenq-Gong Duh, Chaur-Jeng Wang, 2010, "Microstructure, mechanical and electrochemical properties evaluation of pulsed DC reactive magnetron sputtered nanostructured Cr-Zr-N and Cr-Zr-Si-N thin films", Surface and Coatings Technology, Vol.205, pp ( ). 18. Hsien-Wei Chen, Yu-Chen Chan, Jyh-Wei Lee, Jenq-Gong Duh, 2010, "Oxidation behavior of Si-doped nanocomposite CrAlSiN coatings", Surface and Coatings Technology, Vol.205, pp ( ). 19. Yu-Jie Chang, Jyh-Wei Lee, Ching-Hsing Lin, Chen-Yu Chang, Yao-Chuan Lee, Mei-Yin Hwa, 2010, "Photocatalytic deactivation of airborne microbial cells by the stainless steel sieves with surface coated TiO 2 thin films", Surface and Coatings Technology, Vol.205, pp. S328-S332 ( ). 20. Ching-Hsing Lin, Jyh-Wei Lee, Chen-Yu Chang, Yu-Jie Chang, Yao-Chuan Lee, Mei-Yin Hwa,2010,"Novel TiO 2 thin films/glass fiber photocatalytic reactors in the removal of bioaerosols", Surface and Coatings Technology, Vol.205, pp. S341-S344 ( ).

3 21. Jyh-Wei Lee, Yu-Jie Chang, G. J. Weng, J. T. Chen,, C. L. Li, 2010, "A rapid antimicrobial testing by using the Cr-Cu-N nanocomposite thin films with gradient copper content", Journal of Biotechnology, 150S (2010) pp. S451( ). 22. Yu-Jie Chang, Jyh-Wei Lee, Hsin-Pei Chen, Li-Sian Liu, Guo-Jie Weng, 2011, "Photocatalytic characteristics of TiO 2 nanotubes with different microstructures prepared under different pulse anodizations", Thin Solid Films, Vol. 519, pp ( ). 23. Jen-Ching Huang, Yung-Jin Weng, Jyh-Wei Lee, 2011, "Evaluation of the Nanofabrication and Corrosion on Copper by In-situ ECAFM", Journal of the Chinese Society of Mechanical Engineers, Vol.32, No.1, pp.61~66 ( ) 24. Jen-Ching Huang, Jyh-Wei Lee, Chia-Lin Li, 2011, "Nano-scratching and nano-machining in different environments on Cr 2 N/Cu multilayer thin films", Thin Solid Films, Vol. 519, pp ( ) 25. Jyh-Wei Lee, Yu-jie Chang, Guo-jie Weng, Chi-kang Lee, Yi-chu Huang, 2011, "The Influence of Annealing Temperatures on the Crystalline and Photocatalytic Abilities of Anodized TiO2 Nanotube Arrays", Advanced Materials Research, Vols , pp (EI) ( ) 26. Meng-Ko Wu, Jyh-Wei Lee, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, 2011, "The influence of bilayer period and thickness ratio on the mechanical and tribological properties of CrSiN/TiAlN multilayer coatings", Surface and Coatings Technology, Vol. 206, pp ( ) 27. Chih-Hong Cheng, Jyh-Wei Lee, Li-Wei Ho, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, 2011, "Microstructure and mechanical property evaluation of pulsed DC magnetron sputtered Cr B and Cr B N films", Surface and Coatings Technology, Vol. 206, pp ( ) 28. Yung-I Chen, Yu-Ting Lin, Li-Chun Chang, Jyh-Wei Lee, 2011,"Preparation and annealing study of CrTaN coatings on WC-Co", Surface and Coatings Technology, Vol. 206, pp ( ) 29. Sung-Hsiu Huang, Siao-Fan Chen, Yu-Chu Kuo, Chaur-Jeng Wang, Jyh-Wei Lee, Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, Tsung-Eong Hsieh, 2011, "Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings", Surface and Coatings Technology, Vol. 206, pp ( ) 30. Hsien-Wei Chen, Yu-Chen Chan, Jyh-Wei Lee, Jenq-Gong Duh, 2011, "Oxidation resistance of nanocomposite CrAlSiN under long-time heat treatment", Surface and Coatings Technology, Vol. 206, pp ( )

4 31. Hao-Hsiang Huang, Fan-Bean Wu, Jyh-Wei Lee, L.C. Chang, 2011, "Microstructure and Corrosion Behavior of Ni-Alloy/CrN Nanolayered Coatings", Journal of Nanomaterials, Vol.2011, pp.1-6 (Article ID , 6 pages doi: /2011/137498) 32. M.K. Tsai, C.C.Huang, Y.C.Lee, C.S.Yang, H.C.Yu, Jyh-Wei Lee, S.Y.Hu, C.H.Chen, 2012, "A study on morphology control and optical properties of ZnO nanorods synthesized by microwave heating", Journal of Luminescence, Vol. 132, pp ( ) 33. Jen-Ching Huang, Chia-Lin Li, Jyh-Wei Lee, 2012, "The Study of Nanoscratch and Nanomachining on Hard Multilayer Thin Films Using Atomic Force Microscope", Scanning, Vol.34, pp ( ) 34. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Deen Sun, Bo Li, 2012, "Hard Yet Tough Ceramic Coating: Not a Dream Any More-I. via Nanostructured Multilayering", Nanoscience and Nanotechnology Letters, Vol. 4, pp ( ) 35. Jyh-Wei Lee*, Chih-Hong Cheng, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, Li-Wei Ho, 2012, "Effects of Boron and Nitrogen Contents on the Microstructures and Mechanical Properties of Cr-B-N Nanocomposite Thin Films", Procedia Engineering, Vol.36, pp ( ) (EI Conference) 36. Yuexiu Qiu, Sam Zhang, Bo Li, Jyh-Wei Lee, Dongliang Zhao, 2012, "Influence of Nitrogen Partial Pressure and Substrate Bias on the Mechanical Properties of VN Coatings", Procedia Engineering, Vol. 36, pp ( ) (EI Conference) 37. Jinn P. Chu, J.S.C. Jang, J.C. Huang, H.S. Chou, Y. Yang, J.C. Ye, Y.C. Wang, Jyh-Wei Lee, F.X. Liu,P.K. Liaw, Y.C. Chen, C.M. Lee, C.L. Li, Cut Rullyani, 2012,"Thin film metallic glasses: Unique properties and potential applications", Thin Solid Films, Vol. 520, pp ( ) 38. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Bo Li, 2012, "Influence of Bias Voltage on the Hardness and Toughness of CrAlN Coatings via Magnetron Sputtering", Surface and Coatings Technology, Vol. 206, pp ( ) 39. Pao-Sheng Chen, Hsien-Wei Chen, Jenq-Gong Duh, Jyh-Wei Lee, and Jason Shian-Ching Jang, 2012,"Mechanical and thermal behaviors of nitrogen-doped Zr-Cu-Al-Ag-Ta An alternative class of thin film metallic glass", Applied Physics Letters, Vol. 101, pp ( ) 40. Jyh-Wei Lee*, C.-H. Cheng, J.-G. Duh, H.-W. Chen, Y.-C. Chan, 2013,"The influence of boron contents on the microstructure and mechanical properties of Cr-B-N thin films", Vacuum, Vol. 87, pp ( )

5 41. Yu-Chen Chan, Hsien-Wei Chen, Pen-Shen Chao, Jenq-Gong Duh, Jyh-Wei Lee, 2013, "Microstructure control in TiAlN/SiN x multilayers with appropriate thickness ratios for improvement of hardness and anti-corrosion characteristics", Vacuum, Vol. 87, pp ( ) 42. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Bo Li, 2013, "Toughening effect of Ni on nc-craln/a-sinx hard nanocomposite", Applied Surface Science, Vol. 265, pp ( ) 43. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Jen-Ching Huang, Chi-Hsiao Yeh, 2013, "Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloy", Thin Solid Films, Vol. 528, pp ( ) 44. Ching-Yen Chuang, Jyh-Wei Lee*, Chia-Lin Li, Jinn P. Chu, 2013,"Mechanical properties study of a magnetron-sputtered Zr-based thin film metallic glass", Surface and Coatings Technology, Vol. 215, pp ( ) 45. Ching-Yen Chung, Yi-Chia Liao, Jyh-Wei Lee*, Chia-Lin Li, Jinn P. Chu, Jenq-Gong Duh, 2013, "Electrochemical characterization of Zr-based thin film metallic glass in hydrochloric aqueous solution", Thin Solid Films, Vol.529, pp ( ) 46. Yu-Chen Chan, Rong-Hua Wei, Po-Yu Chen, Jyh-Wei Lee, Jenq-Gong Duh, 2013, "Exploration of novel bio-inspired materials via gradient nanocomposite and hybrid multilayer coatings", Plasma Application and Hybrid Functionally Materials, Vol.22, pp ( ) 47. Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, Jyh-Wei Lee, 2013, "Texture, Microstructure, and Tribological Behavior in TiAlN/SiN x Multilayers", International Journal of Applied Ceramic Technology, pp.1-7(doi: /ijac.12060)( ) 48. Chil-Chyuan Kuo, Yi-Ruei Chen, Cheng-Yi Tong, Jyh-Wei Lee, 2013, "A low-cost optical inspection system for rapid surface roughness measurements of CrCN hard films", Optik Vol.124, pp ( ) 49. Pi-Chuen Tsai, Chun-Feng Tseng, Chung-Wei Yang, Iang-Chuen Kuo, Yia-Ling Chou, Jyh-Wei Lee, 2013, "Thermal cyclic oxidation performance of plasma sprayed zirconia thermal barrier coatings with modified high velocity oxygen fuel sprayed bond coatings", Surface and Coatings Technology Vol. 228, pp.s11 S14 ( ) 50. Yuexiu Qiu, Sam Zhang, Jyh-Wei Lee, Bo Li, Yuxi Wang, Dongliang Zhao, 2013, "Self-lubricating CrAlN/VN multilayer coatings at room temperature", Applied Surface Science, Vol. 279, pp ( ) 51. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Chi-Hsiao Yeh, Jen-Ching Huang, 2013, "Characterization and haemocompatibility of fluorinated DLC and Si

6 interlayer on Ti6Al4V", Surface and Coatings Technology, Vol. 231, pp ( ) 52. Cheng-Yi Tong, Jyh-Wei Lee*, Chil-Chyuan Kuo, Sung-Hsiu Huang, Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, 2013, "Effects of carbon content on the microstructure and mechanical property of cathodic arc evaporation deposited CrCN thin films", Surface and Coatings Technology, Vol. 231, pp ( ) 53. Pao-Sheng Chen, Hsien-Wei Chen, Jenq-Gong Duh, Jyh-Wei Lee, Jason Shian-Ching Jang, 2013, "Characterization of mechanical properties and adhesion of Ta Zr Cu Al Ag thin film metallic glasses", Surface and Coatings Technology, Vol. 231, pp ( ) 54. Siao-Fan Chen, Yu-Chu Kuo, Chaur-Jeng Wang, Sung-Hsiu Huang, Jyh-Wei Lee*, Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, Tsung-Eong Hsieh, 2013,"The effect of Cr/Zr chemical composition ratios on the mechanical properties of CrN/ZrN multilayered coatings deposited by cathodic arc deposition system", Surface and Coatings Technology, Vol. 231, pp ( ) 55. Yuexiu Qiu, Sam Zhang, Bo Li, Yuxi Wang, Jyh-Wei Lee, Fengji Li, Dongliang Zhao, 2013, "Improvement of tribological performance of CrN coating via multilayering with VN", Surface and Coatings Technology, Vol. 231, pp ( ) 56. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Deen Sun, Bo Li, 2013,"Toward Hard yet Tough CrAlSiN Coatings via Compositional Grading", Surface and Coatings Technology, Vol. 231, pp ( ) 57. Yu-Chen Chan, Hsien-Wei Chen, Yan-Zuo Tsai, Jenq-Gong Duh, Jyh-Wei Lee, 2013, "Texture, microstructure and anti-wear characteristics in isostructural CrAlSiN/W 2 N multilayer coatings", Thin Solid Films, Vol. 544, pp ( ) 58. Chin-Chang Yeh, Kun-Ling Wu, Jyh-Wei Lee, Biing-Hwa Yan, 2013, "Study on surface characteristics using phosphorous dielectric on wire electrical discharge machining of polycrystalline silicon", The International Journal of Advanced Manufacturing Technology, Vol. 69, Issue 1-4, pp ( ) 59. Feng-Ji Li, Sam Zhang, Jyh-Wei Lee, Dong-liang Zhao, 2013,"Wire or no wire -Depends on the catalyst layer thickness", Journal of Crystal Growth, Vol. 381, pp ( ) 60. Li-Wei Ho, Jyh-Wei Lee*, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh,"Structure and mechanical property evaluation of Cr Ti B N coatings" Thin Solid Films, Vol.544, pp ( )

7 61. Yu-Chen Chan1, Hsien-Wei Chen, Rong-Hua Wei, Jyh-Wei Lee, Jenq-Gong Duh,"Effects of Al and V Additions on Mechanical Response in Thick TiSiCN Nanocomposites Deposited Using Plasma-Enhanced Magnetron Sputtering", Japanese Journal of Applied Physics, Vol. 52 (2013) pp. 11NJ NJ10-5 ( ) 62. Yu-Chiao Hsiao, Jyh-Wei Lee*, Yung-Chin Yang, Bih-Show Lou, 2013, "Effects of duty cycle and pulse frequency on the fabrication of AlCrN thin films deposited by high power impulse magnetron sputtering",thin Solid Films Vol. 549, pp ( ) 63. Tzu-Pin Hsiao, Yung-Chin Yang, Jyh-Wei Lee*, Chia-Lin Li, Jinn P. Chu, 2013, "The microstructure and mechanical properties of nitrogen and boron contained ZrCuAlNi thin film metallic glass composites", Surface & Coatings Technology Vol. 237, pp ( ) 64. Yung-I Chen, Hsiu-Nuan Chu, Li-Chun Chang, Jyh-Wei Lee, 2014, "Internal oxidation and mechanical properties of Ru based alloy coatings" Journal of Vacuum Science and Technology, A, Vol. 32(2), pp. 02B B101-8 ( ) 65. Chin-Chang Yeh, Kun-Ling Wu, Jyh-Wei Lee, Biing-Hwa Yan, 2014, Processing Characteristics Using Phosphorous Dielectric on Wire Electrical Discharge Machining of Polycrystalline Silicon, Materials and Manufacturing Processes,Vol. 29, Issue 2, pp ( ) 66. Hsien-Wei Chen, Kai-Chieh Hsu, Yu-Chen Chan, Jenq-Gong Duh, Jyh-Wei Lee, Jason Shian-Ching Jang, Guo-Ju Che, 2014, "Antimicrobial properties of Zr Cu Al Ag thin film metallic glass", Thin Solid Films, in press ( 67. P.H. Tsai, J.B. Li, Y.Z. Chang, H.C. Lin, J.S.C. Jang, J.P. Chu, Jyh-Wei Lee, P.K. Liaw, 2014, "Fatigue properties improvement of high-strength aluminum alloy by using a ZrCu-based metallic glass thin film coating" Thin Solid Films, in press ( 68. C.M. Lee, J.P. Chu, W.Z. Chang, Jyh-Wei Lee, J.S.C. Jang, P.K. Liaw, 2014, "Fatigue property improvements of Ti 6Al 4V by thin filmcoatings of metallic glass and TiN: a comparison study", Thin Solid Films, in press ( 69. Jia-Hong Chu, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, Jyh-Wei Lee, Jason Shian-Ching Jang, 2014, "Modification of structure and property in Zr-based thin film metallic glass via processing temperature control" Thin Solid Films, in press ( j.tsf )

8 70. Tzu-Pin Hsiao, Yung-Chin Yang, Jyh-Wei Lee*, Chia-Lin Li, Jinn P. Chu, 2014, "The microstructure and mechanical properties of nitrogen and boron contained ZrCuAlNi thin film metallic glass composites" Surface and Coatings Technology, in press ( /j.surfcoat )