BONDERITE M-PT E2 BULK MSDS-No. : V001.1 Revision: printing date: BONDERITE M-PT E2 BULK.

Size: px
Start display at page:

Download "BONDERITE M-PT E2 BULK MSDS-No. : V001.1 Revision: printing date: BONDERITE M-PT E2 BULK."

Transcription

1 Safety Data Sheet Page 1 of 5 BONDERITE M-PT E2 BULK MSDS-No. : Revision: printing date: Section 1. Identification of the substance/preparation and of the company/undertaking Product name: BONDERITE M-PT E2 BULK Identification of manufacturer, importer or distributor Importer: PT. Henkel Indonesien, TALAVERA Office Park, 21st Floor, Jl. T. B. Simatupang Kav.26, Jakarta Indonesia Tel no Fax no address of person responsible for Safety Data Sheet: ap-ua-psra.sea@henkel.com Section 2. Composition / information on ingredients Declaration of ingredients: EINECS content Classification % T - Toxic; R23/24/25 C - Corrosive; R % T - Toxic; R23/24/25 C - Corrosive; R34 Section 3. Hazards identification Hazard classification: Risk phrases: Xn - Harmful R20/21/22 Harmful by inhalation, in contact with skin and if swallowed. Section 4. First aid measures Inhalation: Skin contact: Eye contact: Ingestion: If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. Remove contaminated clothing and footwear. Rinse with large amounts of running water. GET MEDICAL ATTENTION IMMEDIATELY! If iced 0.13% benzalkonium chloride (Zephiran) solution or 2.5% calcium gluconate gel are available, the rinsing may be limited to 5 minutes, with the soaks or gel applied as soon as the rinsing is stopped. If benzalkonium chloride or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided. In case of contact with the e, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention. Seek medical advice. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to an unconscious person.

2 BONDERITE M-PT E2 BULK Page 2 of 5 Section 5. Fire fighting measures Suitable extinguishing media: Special protection equipment for firefighters: Particular danger/case of fire: Dry chemical. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. This product is an aqueous mixture which will not burn. Hazardous combustion products: Irritating and toxic gases or fumes may be released during a fire. Flammable and explosive hydrogen gas may be formed when acids react with certain metals. Hydrogen fluoride gas may evolve when chemical is subjected to prolonged high temperature. Section 6. Accidental release measures Environmental precautions: Clean-up methods: Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Absorb spill with inert material. Shovel material into appropriate container for disposal. Section 7. Handling and storage Handling: Storage: Avoid contact with e, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only. Store in tightly closed containers. In a cool/well-ventilated area. Isolate from incompatible substances. Store above 0 C. (32 F) Vented bung Protect from freezing.

3 BONDERITE M-PT E2 BULK Page 3 of 5 Section 8. Exposure controls / personal protection Ingredient Type ppm mg/m 3 Remarks ZIRCONIUM AND COMPOUNDS, AS ZR 5 ACGIH ZIRKONIUM DAN PERSENYAWAANNYA, SEBAGAI ZR 5 ID NAB ZIRCONIUM AND COMPOUNDS, AS ZR 10 ACGIH FLUORIDES, AS F FLUORIDES, SOLID, INORGANIC (AS F) ZIRCONIUM AND COMPOUNDS, AS ZR ZIRCONIUM AND COMPOUNDS, AS ZR FLUORIDES, SOLID, INORGANIC (AS F) 5 NIOSH/GUIDE 10 NIOSH/GUIDE 2,5 ACGIH 2,5 NIOSH/GUIDE 2,5 ID NAB 5 ACGIH 5 ID NAB 10 ACGIH 5 NIOSH/GUIDE 10 NIOSH/GUIDE 2,5 NIOSH/GUIDE 2,5 ID NAB Respiratory protection: Hand protection: Eye protection: Body protection: Engineering controls: If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided. Use impervious gloves. Please note that in practice the working life of chemical resistant gloves may be considerably reduced as a result of many influencing factors (e.g. temperature). Suitable risk assessment should be carried out by the end user. If signs of wear and tear are noticed then the gloves should be replaced. Wear chemical goggles; face shield (if splashing is possible). Use of impervious apron and boots are recommended. Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product. Appearance: Colorless Liquid Odor: ammoniacal Melting point: 0 C (32 F) Vapor density: Not determined Specific gravity: 1,02-1,04 Section 9. Physical and chemical properties

4 BONDERITE M-PT E2 BULK Page 4 of 5 ph: 3,0 Approximately Boiling point: > 115,6 C (> F) Flash point: Not applicable Solubility: Solvent:, Complete Section 10. Stability and reactivity Conditions to avoid: Materials to avoid: Store away from incompatible materials. Stable under normal conditions of storage and use. This product may react with strong alkalies. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. Hazardous decomposition products: Hazardous polymerization: Decomposes with heat to produce oxides of nitrogen. May liberate hydrogen fluoride. Will not occur. Section 11. Toxicological information Acute toxicity: type LD50 LD mg/kg mg/kg Route of application oral dermal Exposure time Species rat rabbit Method Section 12. Ecological information Toxicity: Dihydrogen (2-) type Acute Toxicity Study Exposure time Species Method LC50 > 200 mg/l Fish 96 h Leuciscus idus OECD Guideline 203 (Fish, Acute Toxicity Test) EC50 50 mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) LC mg/l Fish 96 h Pimephales promelas OECD Guideline 203 (Fish, Acute Toxicity Test) Section 13. Disposal considerations Product Method of disposal: Packaging Dispose of in accordance with local and national regulations.

5 BONDERITE M-PT E2 BULK Page 5 of 5 Disposal for uncleaned package: Packaging that cannot be cleaned are to be disposed of in the same manner as the product. Section 14. Transport information General information: Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR. Section 15. Regulations - classification and identification Indication of danger: Risk phrases: Safety phrases: Xn - Harmful R20/21/22 Harmful by inhalation, in contact with skin and if swallowed. S36/37 Wear suitable protective clothing and gloves. S60 This material and its container must be disposed of as hazardous waste. Global inventory status: Regulatory list EINECS TSCA AICS DSL ENCS (JP) KECI (KR) INV (CN) ISHL (JP) NZIOC Notification Issue date: Disclaimer: Section 16. Other information This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. : This safety data sheet was prepared in accordance with Council Directive 67/548/EEC and it's subsequent amendments, and Commission Directive 1999/45/EC.