Save Labor, Reduce Weight and Improve EMI Shielding with Glenair s Micro-D Shielded Cable Assemblies

Transcription

1 Single-Ended or Double-Ended These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. Now With Twisted Pairs No need to create a procurement specification for Micro-D cables with twisted pairs. Glenair - cables are furnished with a full complement of white/blue twisted pair wires. Integral Shield Termination The connector shell has a platform to accept and-it shield termination bands. The cable shield braid is attached directly to the connector. Save Labor, Reduce Weight and Improve EMI Shielding with Glenair s Micro-D Shielded Cable Assemblies Aerospace electronics systems require higher and higher levels of protection from radiated emissions. Glenair s fully shielded Micro-D cable assemblies meet this need. The cable shield is attached directly onto the onepiece connector shell and secured with a stainless steel and-master ATS clamp. These pre-wired, 00% tested assemblies meet the requirements of MIL-DTL-. An optional ground spring on the pin connector assures low shell-to-shell resistance. Available with a variety of wire types and shields, Micro-D shielded assemblies can be ordered in any length, either single-ended or back-to-back. Ground Spring and EMI Shielding Effectiveness A gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in EMI protection. The graphs compare identical connectors tested with and without ground springs. EMI Performance with Ground Spring EMI Performance without Ground Spring SHIELDING EFFECTIVENESS (Db) E+0.00E+0.00E+0.00E+06.00E+0.00E+0.00E+0 SHIELDING EFFECTIVENESS (Db) E+0.00E+0.00E+0.00E+06.00E+0.00E+0.00E+0 frequency (Hz) frequency (Hz) 0 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 0 Printed in U.S.A. GLENAIR, INC. AIR WAY GLENDALE, CA FAX sales@glenair.com

2 -0 (Untwisted Wire) and - (Twisted Wire Pairs) Micro-D Harness How To Order Shielded Micro-D Cable Assemblies Sample Part Number P K - M A G Series -0 - Untwisted Wire - - Twisted Pair Wire Shell Material and Finish Aluminum Shell - Cadmium - Electroless Nickel - Gold Contact Layout,,,,,,, -, 6, 6,, 00, 0 P Pin (Single End Plug) S Socket (Single End Receptacle) Contact Type GP Double End Cable, Pin Connectors oth Ends GS Double End Cable, Socket connectors oth Ends CS Double End Cable, Pin and Socket Wire Gage (AWG) - # 6 - #6 - # 0 - #0 (J wire type only) K Fluoropolymer Wire Per MIL-W-/ (Not available in #0 gage) Wire Type J Cross-Linked Tefzel Wire Per MIL-W-/ White (-0 only) or White/lue Twisted Pairs (- Only) Color-Coded Per MIL-STD-6 (-0 only)(# and #6 gage only) Wire Color White/lue Twisted Pairs (- only) Ten Color Repeating (-0 only) Overall Length (In.) Example = inches 6 Inch ( mm.) Minimum No Mounting Hardware Installed F Float Mount, for Front Panel L Male Jackscrew, Allen Head, Non-Removable Mounting Hardware M Male Jackscrew, Allen Head, Low Profile Mounting P Female Jackpost R Float Mount, for Rear Panel Mounting S Male Jackscrew, Slot Head, Low Profile Shield and Jacket Option N No Shield, No Jacket A raided Shield Installed (Nickel over Copper) C raided Shield Installed (Nickel over Copper) With E-CTFE Halar Expando Jacket (+0 C.) D No Shield, With E-CTFE Halar Expando Jacket Installed (+0 C.) S 00% raided AmberStrand Shield Installed T 00% raided AmberStrand Shield Installed with E-CTFE Halar Expando Jacket (+0 C.) V % raided AmberStrand Shield Installed Z % raided AmberStrand Shield Installed with E-CTFE Halar Expando Jacket (+0 C.) W ArmorLite raided Microfiliment Stainless Steel Shield Installed X ArmorLite raided Microfiliment Stainless Steel Shield Installed with E-CTFE Halar Expando Jacket (+0 C) Ground Spring Option* N No Ground Spring G Ground Spring Installed (Pin Connectors Only) *Ground spring cannot be used with cadmium plating Table I: Mounting Hardware P M S L F R Thru-Hole, No Mounting Hardware Female Jackpost Hex Head Jackscrew Slot Head Jackscrew Hex Head Jackscrew Non- Removable Float Mount for Front Panel Mounting Float Mount for Rear Panel Mounting 0 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 0 Rec. 00 Printed in U.S.A. GLENAIR, INC. AIR WAY GLENDALE, CA FAX sales@glenair.com

3 -0 (Untwisted Wire) and - (Twisted Wire Pairs) Current Rating Dielectric Withstanding Voltage Performance Specifications AMP 0 VAC Sea Level Voltage 0 VAC 0,000 Feet Insulation Resistance 000 Megohms Minimum Contact Resistance Milliohms Maximum Low Level Contact Resistance Milliohms Maximum Magnetic Permeability µ Maximum Operating Temperature - C. to +0 C. Shock 0 g. Vibration 0 g. Outgassing Meets NASA Outgassing Requirements Mating Force (0 Ounces) X (# of Contacts) EMI Shielding Effectiveness 0 d Attenuation, 00 MHz to 000 MHz For additional performance requirements, please refer to MIL DTL. (6.) F.0 ±.00 (.6 ± 0.) A C Connector Shell Insulator Interfacial Seal Pin Contact Socket Contact Shield raid Wire Hardware Jacket Encapsulant Materials and Finishes Plating Code : Cadmium With Yellow Chromate Plating Code : Electroless Nickel, Plating Code : Gold Liquid Crystal Polymer (LCP)/Polyphenylene Sulfide (PPS) Fluorosilicone Rubber, lue Copper Alloy With 0 Microinches Gold over Nickel Plating Copper Alloy With 0 Microinches Gold Over Nickel Plating #6 AWG Nickel-Coated Copper per ASTM Class OFHC 00% AmberStrand EMI/RFI Conductive Composite Thermoplastic raided Shielding % AmberStrand Conductive Composite Thermoplastic EMI/RFI Shielding lended with % NiCu EMI/RFI raided Shielding ArmorLite Lightweight Stainless Steel EMI/RFI Shielding Type K: per MIL-W-/. Silver-Plated Copper Conductor, Extruded TFE fluoropolymer Insulation Type J: per MIL-W-/. Silver-Plated Copper Conductor, Extruded Crosslinked Tefzel Insulation.. 00 Series Stainless Steel Type : PET Expando raided Jacket, + C. Type C: E-CTFE (Ethylene- Chlorotriflourethylene) Halar Expando raided Jacket, +0 C. Epoxy Resin Hysol EE Wire Length E D (H) (K) -6 CONTACTS.06/.0 (./.) DIA -0 CONTACTS./. (./.6)DIA (G) (J) Table II: Dimensions A Max. C Max. D Max. E Max. F (G) (H) (J) (K) Layout In. mm. In. mm. ±.00 ± 0.0 In. mm. In. mm. In. mm. In. mm. ±.00 ± 0.0 In. mm. In. mm. In. mm. In. mm. P S P S P S P S P S P S P S P S P S P S P S P S P S Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 0 Printed in U.S.A. GLENAIR, INC. AIR WAY GLENDALE, CA FAX sales@glenair.com Rev...

4 -0 (Untwisted Wire) and - (Twisted Wire Pairs) Micro-D Harness - THRU CONTACT TWISTED PAIR WIRING DIAGRAM Contacts Contacts Contacts Contacts Contacts Contacts Row special Contacts Contacts 0 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 0 Printed in U.S.A. GLENAIR, INC. AIR WAY GLENDALE, CA FAX sales@glenair.com

5 -0 (Untwisted Wire) and - (Twisted Wire Pairs) - 6 THRU 0 CONTACT TWISTED PAIR WIRING DIAGRAM Contacts Contacts Contacts Contacts 00 Contacts 0 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 0 Printed in U.S.A. GLENAIR, INC. AIR WAY GLENDALE, CA FAX sales@glenair.com