SIGMA-ALDRICH. Material Safety Data Sheet Version 4.2 Revision Date 02/15/2011 Print Date 09/16/2011

Transcription

1 SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.2 Revision Date 02/15/2011 Print Date 09/16/ PRODUCT AND COMPANY IDENTIFICATION Product name : Sodium sulfite Product Number : Brand : Sigma Product Use : For laboratory research purposes. Supplier : Sigma-Aldrich 3050 Spruce Street SAINT LOUIS MO USA Telephone : Fax : Emergency Phone # (For : (314) both supplier and manufacturer) Preparation Information : Sigma-Aldrich Corporation Product Safety - Americas Region Manufacturer : Sigma-Aldrich Corporation 3050 Spruce St. St. Louis, Missouri USA 2. HAZARDS IDENTIFICATION Emergency Overview OSHA Hazards Target Organ Effect Target Organs Central nervous systemcentral nervous system GHS Classification Acute toxicity, Oral (Category 5) Acute toxicity, Inhalation (Category 5) Eye irritation (Category 2B) GHS Label elements, including precautionary statements Pictogram Signal word Hazard statement(s) H303 + H333 H320 Precautionary statement(s) P305 + P351 + P338 HMIS Classification Health hazard: 1 Flammability: 0 Physical hazards: 0 NFPA Rating Health hazard: 1 Fire: 0 Reactivity Hazard: 0 none Warning May be harmful if swallowed or if inhaled. Causes eye irritation. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Sigma Page 1 of 6

2 Potential Health Effects Inhalation Skin Eyes Ingestion May be harmful if inhaled. May cause respiratory tract irritation. May be harmful if absorbed through skin. May cause skin irritation. May cause eye irritation. May be harmful if swallowed. 3. COMPOSITION/INFORMATION ON INGREDIENTS Formula : Na 2 O 3 S Molecular Weight : g/mol CAS-No. EC-No. Index-No. Concentration Sodium sulphite FIRST AID MEASURES General advice Consult a physician. Show this safety data sheet to the doctor in attendance.move out of dangerous area. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 5. FIRE-FIGHTING MEASURES Conditions of flammability Not flammable or combustible. Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Dry powder Special protective equipment for fire-fighters Wear self contained breathing apparatus for fire fighting if necessary. Hazardous combustion products Hazardous decomposition products formed under fire conditions. - Sulphur oxides, Sodium oxides Further information The product itself does not burn. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Do not flush with water. Keep in suitable, closed containers for disposal. 7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Sigma Page 2 of 6

3 Provide appropriate exhaust ventilation at places where dust is formed. Conditions for safe storage Keep container tightly closed in a dry and well-ventilated place. Never allow product to get in contact with water during storage. Do not store near acids. Air and moisture sensitive. Store under inert gas. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Contains no substances with occupational exposure limit values. Personal protective equipment Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Eye protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin and body protection impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Colour Safety data ph Melting point/freezing point Boiling point Flash point Ignition temperature Autoignition temperature Lower explosion limit Upper explosion limit Vapour pressure Density Water solubility Partition coefficient: solid at 126 g/l at 25 C (77 F) g/cm3 126 g/l at 20 C (68 F) - completely soluble Sigma Page 3 of 6

4 n-octanol/water Relative vapour density Odour Odour Threshold Evaporation rate 10. STABILITY AND REACTIVITY Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions Conditions to avoid Exposure to air may affect product quality. Exposure to moisture may affect product quality. Materials to avoid Acids, Strong oxidizing agents Hazardous decomposition products Other decomposition products - Contact with acids releases sulphur dioxide. Hazardous decomposition products formed under fire conditions. - Sulphur oxides, Sodium oxides 11. TOXICOLOGICAL INFORMATION Acute toxicity Oral LD50 LD50 Oral - rat - 3,560 mg/kg Inhalation LC50 LC50 Inhalation - rat - 4 h - > 5,500 mg/m3 Dermal LD50 Other information on acute toxicity Skin corrosion/irritation Skin - rabbit - No skin irritation Serious eye damage/eye irritation Eyes - rabbit - Mild eye irritation Respiratory or skin sensitization Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals. Germ cell mutagenicity Carcinogenicity This product is or contains a component that is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification. IARC: ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. No component of this product present at levels greater than or equal to 0.1% is identified as a Sigma Page 4 of 6

5 NTP: OSHA: Reproductive toxicity carcinogen or potential carcinogen by ACGIH. No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. Teratogenicity Specific target organ toxicity - single exposure (Globally Harmonized System) Specific target organ toxicity - repeated exposure (Globally Harmonized System) Aspiration hazard Potential health effects Inhalation Ingestion Skin Eyes May be harmful if inhaled. May cause respiratory tract irritation. May be harmful if swallowed. May be harmful if absorbed through skin. May cause skin irritation. May cause eye irritation. Signs and Symptoms of Exposure May cause irritation of the:, Gastrointestinal tract, violent colic, Diarrhoea, Disturbance of:, circulatory system, Central nervous system depression, death, Persons with allergies and/or asthma may exhibit hypersensitivity to sulfites., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Synergistic effects Additional Information RTECS: WE ECOLOGICAL INFORMATION Toxicity Toxicity to fish Persistence and degradability Bioaccumulative potential Mobility in soil PBT and vpvb assessment Other adverse effects 13. DISPOSAL CONSIDERATIONS LC50 - Gambusia affinis (Mosquito fish) mg/l - 96 h Sigma Page 5 of 6

6 Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. 14. TRANSPORT INFORMATION DOT (US) Not dangerous goods IMDG Not dangerous goods IATA Not dangerous goods 15. REGULATORY INFORMATION OSHA Hazards Target Organ Effect SARA 302 Components SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 Components SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA 311/312 Hazards Chronic Health Hazard Massachusetts Right To Know Components No components are subject to the Massachusetts Right to Know Act. Pennsylvania Right To Know Components Sodium sulphite New Jersey Right To Know Components Sodium sulphite CAS-No CAS-No Revision Date Revision Date California Prop. 65 Components This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. 16. OTHER INFORMATION Further information Copyright 2011 Sigma-Aldrich Co. License granted to make unlimited paper copies for internal use only. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Sigma-Aldrich Co., shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. Sigma Page 6 of 6