Technical Specification _3.0. Flygt Hz

Transcription

1 Technical Specification 88587_3. Flygt Hz

2 Table of Contents Table of Contents 1 D-pump roduct description Motor rating and performance curves... F-pump roduct description Motor rating and performance curves M-pump roduct description Motor rating and performance curves N-pump....1 roduct description.... Motor rating and performance curves Motor rating and performance curves Motor rating and performance curves Flygt 369 Technical Specification 1 Tel info@pompdirect.nl

3 1 D-pump 1 D-pump 1.1 roduct description WS967 Usage Denomination submersible pump, with vortex hydraulic, for liquids containing solids and abrasive media, or light wastewater. Type Non-explosion proof version Explosion proof version ressure class Gray iron LT Low head MT Medium head HT High head Cast iron, nodular MT Medium head types F, H,, S, X F, S The pump can be used in the following installations: F Free standing semipermanent, wet well arrangement where the pump is placed on a firm surface. Semipermanent, wet well arrangement with the pump installed on two guide bars. The connection to the discharge is automatic. S ortable semipermanent, wet well arrangement with hose coupling or flange for connection to the discharge pipeline. H Semipermanent, wet well quick connection suspended arrangement, incorporating integral non-return valve. X Optional installation, wet or dry well arrangement without predetermined mechanical connection and with drilled flanges. Dry well arrangement requires cooling system or de-rated motor. pplication limits Feature Liquid temperature Description Maximum C (1 F) Flygt 369 Technical Specification Tel info@pompdirect.nl

4 1 D-pump Feature Description Liquid temperature, warm water version Maximum 7 C (158 F) Depth of immersion Maximum m (65 ft) ph of the pumped liquid Liquid density Maximum 11 kg/m 3 Motor data Feature Motor type Frequency ower supply Description Squirrel-cage induction motor 5 Hz 1-phase or 3-phase Starting method Direct on-line Star-delta Soft starter Number of starts per hour Maximum 15 Code compliance IEC 63-1 Voltage variation Continuously running: Maximum ±5% Intermittent running: Maximum ±1% Voltage imbalance between phases Stator insulation class Maximum % F (+155 C) Cables pplication Direct-on-line start or Y/D start with two cables Y/D start Type Flygt SUBCB - a heavy duty cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 1 mm with unscreened control cores. Flygt SUBCB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 7G6 mm with unscreened control cores. Monitoring equipment Motor Thermal contacts opening temperature 13-8-, 13-8-, C (57 F) C (8 F) Materials Table 1: Major parts except mechanical seals Denomination Material STM EN Major castings Cast iron, gray 35B GJL-5 Flygt 369 Technical Specification 3 Tel info@pompdirect.nl

5 1 D-pump Denomination Material STM EN ump housing, alternative 1 ump housing, alternative Cast iron, gray 3B GJL- Cast iron, gray 35B GJL-5 Impeller, alternative 1 Cast iron, gray 35B GJL-5 Impeller, alternative Cast iron, gray 3B GJL- Impeller, alternative 3 Cast iron, nodular GJS-7- Lifting handle Stainless steel ISI 3 1,31 Shaft Stainless steel ISI QT8 Screws and nuts Stainless steel, ISI , 1.36, 1.37, O-rings Nitrile rubber (NBR) 7 IRH Oil, part no 9175 Table : Mechanical seals Medical white oil of paraffin type. Fulfills FD (a) lternative Inner seal Outer seal 1 Carbon (CSb)/ luminum oxide (l O 3 ) Carbon (CSb)/ luminum oxide (l O 3 ) 3 Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) luminum oxide (l O 3 )/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Surface treatment riming ainted with a primer, see internal standard M7.. Finish Navy gray color NCS 58-B7G. Two-component highsolid top coating, see internal standard M7.. for standard painting and M7..8 for special painting. Options ccessories Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Surface treatment (Epoxy) Zinc anodes Other cables Discharge connections, adapters, hose connections, and other mechanical accessories Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables 1. Motor rating and performance curves These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. Flygt 369 Technical Specification Tel info@pompdirect.nl

6 1 D-pump LT LT WS986B Table 3: V, 5 Hz, 3 phase ower Factor, F,,S F,,S F,,S F,,S F,,S F,,S F,,S F,,S Flygt 369 Technical Specification 5 Tel info@pompdirect.nl

7 1 D-pump LT WS997B Table : 3 V, 5 Hz, 1 phase ower Factor, F,,S F,,S 6 Flygt 369 Technical Specification Tel info@pompdirect.nl

8 1 D-pump MT D-impeller, standard MT WS998B Table 5: V, 5 Hz, 3 phase ower Factor, F,,S F,,S F,,S Flygt 369 Technical Specification 7 Tel info@pompdirect.nl

9 1 D-pump MT WS135 Table 6: 3 V, 5 Hz, 1 phase ower Factor, F,,S 8 Flygt 369 Technical Specification Tel info@pompdirect.nl

10 1 D-pump MT D-impeller, abrasive MT WS185 Table 7: V, 5 Hz, 3 phase power, power, Start current, ower Factor, cos φ F,,S F,,S F,,S Flygt 369 Technical Specification 9 Tel info@pompdirect.nl

11 1 D-pump HT HT WS999C Table 8: V, 5 Hz, 3 phase power, power, Start current, ower Factor, cos φ F,H,,S F,H,,S F,H,,S F,H,,S F,H,,S 1 Flygt 369 Technical Specification Tel info@pompdirect.nl

12 1 D-pump HT WS993B Table 9: 3 V, 5 Hz, 1 phase ower Factor, F,H,,S F,H,,S Flygt 369 Technical Specification 11 Tel info@pompdirect.nl

13 F-pump F-pump.1 roduct description WS968 Usage Denomination submersible pump for light liquid manure, or contaminated sewage and sludge. The impeller is S-shaped and fitted with a cutting device. Type Non-explosion proof version Explosion proof version ressure class Chopper LT Low head, S Hard-Iron types The pump can be used in the following installations: Semipermanent, wet well arrangement with the pump installed on two guide bars. The connection to the discharge is automatic. S ortable semipermanent, wet well arrangement with hose coupling or flange for connection to the discharge pipeline. pplication limits Feature Description Liquid temperature Maximum C (1 F) Liquid temperature, warm water version Maximum 7 C (158 F) Depth of immersion Maximum m (65 ft) ph of the pumped liquid Liquid density Maximum 11 kg/m 3 Motor data Feature Motor type Frequency Description Squirrel-cage induction motor 5 Hz 1 Flygt 369 Technical Specification Tel info@pompdirect.nl

14 F-pump Feature ower supply Description 3-phase Starting method Direct on-line Star-delta Soft starter Number of starts per hour Maximum 15 Code compliance IEC 63-1 Voltage variation Continuously running: Maximum ±5% Intermittent running: Maximum ±1% Voltage imbalance between phases Stator insulation class Maximum % F (+155 C) Cables pplication Direct-on-line start or Y/D start with two cables Y/D start Type Flygt SUBCB - a heavy duty cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 1 mm with unscreened control cores. Flygt SUBCB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 7G6 mm with unscreened control cores. Monitoring equipment Materials Motor 13-8-, C (57 F) Table 1: Major parts except mechanical seals Thermal contacts opening temperature Denomination Material STM EN Major castings Cast iron, gray 3B GJL- ump housing Cast iron, gray 35B GJL-5 Impeller Hard-Iron 53 III GJN-HB555(XCR3) Suction cover Cast iron, gray 3B GJL- Lifting handle Stainless steel ISI 3 1,31 Shaft Stainless steel ISI QT8 Screws and nuts Stainless steel, ISI , 1.36, 1.37, O-rings Nitrile rubber (NBR) 7 IRH Oil, part no 9175 Medical white oil of paraffin type. Fulfills FD (a) Flygt 369 Technical Specification 13 Tel info@pompdirect.nl

15 F-pump Table 11: Mechanical seals lternative Inner seal Outer seal 1 Carbon (CSb)/ luminum oxide (l O 3 ) Carbon (CSb)/ luminum oxide (l O 3 ) 3 Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) luminum oxide (l O 3 )/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Surface treatment riming ainted with a primer, see internal standard M7.. Finish Navy gray color NCS 58-B7G. Two-component highsolid top coating, see internal standard M7.. for standard painting and M7..8 for special painting. Options ccessories Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Surface treatment (Epoxy) Zinc anodes Other cables Discharge connections, adapters, hose connections, and other mechanical accessories Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Motor rating and performance curves These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. 1 Flygt 369 Technical Specification Tel info@pompdirect.nl

16 F-pump LT LT WS9931 Table 1: V, 5 Hz, 3 phase ower Factor, F,,S F,,S F,,S F,,S Flygt 369 Technical Specification 15 Tel info@pompdirect.nl

17 F-pump LT WS993B Table 13: 3 V, 5 Hz, 1 phase ower Factor, F,,S F,,S 16 Flygt 369 Technical Specification Tel info@pompdirect.nl

18 3 M-pump 3 M-pump 3.1 roduct description WS969 Usage Denomination submersible pump for wastewater containing solids that need to be macerated. The impeller is equipped with a grinder device. Type Gray iron Grinder Non-explosion proof version Explosion proof version ressure class types HT High head F, H,, X The pump can be used in the following installations: F Free standing semipermanent, wet well arrangement where the pump is placed on a firm surface. H Semipermanent, wet well quick connection suspended arrangement, incorporating integral non-return valve. Semipermanent, wet well arrangement with the pump installed on two guide bars. The connection to the discharge is automatic. X Optional installation, wet or dry well arrangement without predetermined mechanical connection and with drilled flanges. Dry well arrangement requires cooling system or de-rated motor. pplication limits Feature Description Liquid temperature Maximum C (1 F) Liquid temperature, warm water version Maximum 7 C (158 F) Depth of immersion Maximum m (65 ft) ph of the pumped liquid Liquid density Maximum 11 kg/m 3 Flygt 369 Technical Specification 17 Tel info@pompdirect.nl

19 3 M-pump Motor data Feature Motor type Frequency ower supply Description Squirrel-cage induction motor 5 Hz 1-phase or 3-phase Starting method Direct on-line Star-delta Soft starter Number of starts per hour Maximum 15 Code compliance IEC 63-1 Voltage variation Continuously running: Maximum ±5% Intermittent running: Maximum ±1% Voltage imbalance between phases Stator insulation class Maximum % F (+155 C) Cables pplication Direct-on-line start or Y/D start with two cables Y/D start Type Flygt SUBCB - a heavy duty cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 1 mm with unscreened control cores. Flygt SUBCB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 7G6 mm with unscreened control cores. Monitoring equipment Materials Motor 13-8-, C (57 F) Table 1: Major parts except mechanical seals Thermal contacts opening temperature Denomination Material STM EN Major castings, alternative 1 Major castings, alternative Cast iron, gray 3B GJL- Cast iron, gray 35B GJL-5 ump housing Cast iron, gray 3B GJL- Impeller Cast iron, gray 3B GJL- Suction cover Cast iron, gray 3B GJL- Cutter wheel Stainless steel, martensitic ISI C 1.1 Cutter plate Stainless steel, martensitic ISI C Flygt 369 Technical Specification Tel info@pompdirect.nl

20 3 M-pump Denomination Material STM EN Lifting handle Stainless steel ISI 3 1,31 Shaft Stainless steel ISI QT8 Screws and nuts Stainless steel, ISI , 1.36, 1.37, O-rings Nitrile rubber (NBR) 7 IRH Oil, part no 9175 Table 15: Mechanical seals Medical white oil of paraffin type. Fulfills FD (a) lternative Inner seal Outer seal 1 Carbon (CSb)/ luminum oxide (l O 3 ) Carbon (CSb)/ luminum oxide (l O 3 ) luminum oxide (l O 3 )/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Surface treatment riming ainted with a primer, see internal standard M7.. Finish Navy gray color NCS 58-B7G. Two-component highsolid top coating, see internal standard M7.. for standard painting and M7..8 for special painting. Options ccessories Leakage sensor in the stator housing (FLS) Surface treatment (Epoxy) Zinc anodes Other cables Discharge connections, adapters, hose connections, and other mechanical accessories Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables 3. Motor rating and performance curves These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. Flygt 369 Technical Specification 19 Tel info@pompdirect.nl

21 3 M-pump HT HT WS9933C Table 16: V, 5 Hz, 3 phase ower Factor, F,H,,S F,H,,S F,H,,S F,H,,S F,H,,S F,H,,S F,H,,S F,H,,S Flygt 369 Technical Specification Tel info@pompdirect.nl

22 3 M-pump HT Table 17: 3 V, 5 Hz, 1 phase WS117B ower Factor, F,H,,S F,H,,S Flygt 369 Technical Specification 1 Tel info@pompdirect.nl

23 N-pump N-pump.1 roduct description WS97 Usage Denomination submersible pump for efficient pumping of clean water, surface water, and wastewater containing solids or long-fibered material. The pump is designed for sustained high efficiency. For abrasive media, Hard-Iron is required. Stainless steel N-impeller is available as an option. Type Non-explosion proof version Explosion proof version ressure class Gray iron MT Medium head SH Super head Hard-Iron MT Medium head SH Super head Stainless steel MT Medium head SH Super head types F, H,, S, X F, H,, S, X F, H,, S, X The pump can be used in the following installations: F Free standing semipermanent, wet well arrangement where the pump is placed on a firm surface. Semipermanent, wet well arrangement with the pump installed on two guide bars. The connection to the discharge is automatic. S ortable semipermanent, wet well arrangement with hose coupling or flange for connection to the discharge pipeline. H Semipermanent, wet well quick connection suspended arrangement, incorporating integral non-return valve. X Optional installation, wet or dry well arrangement without predetermined mechanical connection and with drilled flanges. Dry well arrangement requires cooling system or de-rated motor. Flygt 369 Technical Specification Tel info@pompdirect.nl

24 N-pump pplication limits Feature Description Liquid temperature Maximum C (1 F) Liquid temperature, warm water version Maximum 7 C (158 F) Depth of immersion Maximum m (65 ft) ph of the pumped liquid Liquid density Maximum 11 kg/m 3 Motor data Feature Motor type Frequency ower supply Description Squirrel-cage induction motor 5 Hz 1-phase or 3-phase Starting method Direct on-line Star-delta Soft starter Number of starts per hour Maximum 15 Code compliance IEC 63-1 Voltage variation Continuously running: Maximum ±5% Intermittent running: Maximum ±1% Voltage imbalance between phases Stator insulation class Maximum % F (+155 C) Cables pplication Direct-on-line start or Y/D start with two cables Y/D start Type Flygt SUBCB - a heavy duty cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 1 mm with unscreened control cores. Flygt SUBCB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 9 C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within ph 3-1 and ozone, oil, and flame resistant. Used up to 7 C water temperature. Cables < 7G6 mm with unscreened control cores. Monitoring equipment Motor Thermal contacts opening temperature 13-8-, 13-8-, C (57 F) C (8 F) Flygt 369 Technical Specification 3 Tel info@pompdirect.nl

25 N-pump Materials Table 18: Major parts except mechanical seals Denomination Material STM EN Major castings Cast iron, gray 35B GJL-5 ump housing Cast iron, gray 35B GJL-5 Impeller, alternative 1 Cast iron, gray 35B GJL-5 Impeller, alternative Cast iron, Hard-Iron 53 III GJN-HB555(XCR3) Impeller, alternative 3 Stainless steel, Duplex CD-MCuN 183:1-1.7 Insert ring, alternative 1 Cast iron, gray 35B GJL-5 Insert ring, alternative Cast iron, Hard-Iron 53 III GJN-HB555(XCR3) Lifting handle Stainless steel ISI 316L 1.,1.3, Shaft Stainless steel ISI QT8 Screws and nuts Stainless steel, ISI 316L, 316, 316Ti 1.1,1., O-rings, alternative 1 Nitrile rubber (NBR) 7 IRH - - O-rings, alternative Fluorinated rubber (FM) 7 IRH Oil, part no 9175 Table 19: Mechanical seals Medical white oil of paraffin type. Fulfills FD (a) lternative Inner seal Outer seal 1 Carbon (CSb)/ luminum oxide (l O 3 ) Carbon (CSb)/ luminum oxide (l O 3 ) 3 Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Silicon carbide (RSiC)/ Silicon carbide (RSiC) Corrosion resistant cemented carbide (WCCR)/ Corrosion resistant cemented carbide (WCCR) Surface treatment riming ainted with a primer, see internal standard M7.. Finish Navy gray color NCS 58-B7G. Two-component highsolid top coating, see internal standard M7.. for standard painting and M7..8 for special painting. Options ccessories Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Surface treatment (Epoxy) Zinc anodes Other cables Discharge connections, adapters, hose connections, and other mechanical accessories Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables Flygt 369 Technical Specification Tel info@pompdirect.nl

26 . Motor rating and performance curves MT These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. N-pump MT WS993B Table : V, 5 Hz, 3 phase ower Factor, F,,S F,,S F,,S Flygt 369 Technical Specification 5 Tel info@pompdirect.nl

27 N-pump MT WS137 Table 1: 3 V, 5 Hz, 1 phase ower Factor, F,,S 6 Flygt 369 Technical Specification Tel info@pompdirect.nl

28 N-pump SH SH WS9935B Table : V, 5 Hz, 3 phase ower Factor, F,H,,S F,H,,S F,H,,S Flygt 369 Technical Specification 7 Tel info@pompdirect.nl

29 N-pump SH WS9936B Table 3: 3 V, 5 Hz, 1 phase ower Factor, F,H,,S.3 Motor rating and performance curves These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. 8 Flygt 369 Technical Specification Tel info@pompdirect.nl

30 N-pump MT MT WS9937B Table : V, 5 Hz, 3 phase power, power, Start current, ower Factor, F,,S F,,S F,,S Flygt 369 Technical Specification 9 Tel info@pompdirect.nl

31 N-pump MT WS138 Table 5: 3 V, 5 Hz, 1 phase ower Factor, F,,S 3 Flygt 369 Technical Specification Tel info@pompdirect.nl

32 N-pump SH SH WS9938B Table 6: V, 5 Hz, 3 phase ower Factor, F,H,,S F,H,,S F,H,,S Flygt 369 Technical Specification 31 Tel info@pompdirect.nl

33 N-pump SH WS9939B Table 7: 3 V, 5 Hz, 1 phase power, power, Start current, ower Factor, F,H,,S. Motor rating and performance curves These are examples of motor rating and curves. For more information, please contact your local sales and service representative. Star-delta starting current is 1/3 of Direct on-line starting current. 3 Flygt 369 Technical Specification Tel info@pompdirect.nl

34 N-pump MT MT WS99B Table 8: V, 5 Hz, 3 phase ower Factor, F,,S F,,S F,,S Flygt 369 Technical Specification 33 Tel info@pompdirect.nl

35 N-pump MT WS139 Table 9: 3 V, 5 Hz, 1 phase ower Factor, F,,S 3 Flygt 369 Technical Specification Tel info@pompdirect.nl

36 N-pump SH SH WS991B Table 3: V, 5 Hz, 3 phase ower Factor, F,H,,S F,H,,S F,H,,S Flygt 369 Technical Specification 35 Tel info@pompdirect.nl

37 N-pump SH WS99B Table 31: 3 V, 5 Hz, 1 phase ower Factor, F,H,,S 36 Flygt 369 Technical Specification Tel info@pompdirect.nl