Decorative. Vetro Pendants. Power Heads. Glass/Acrylic. Suspension Kits 02 24W LW LED K K K K

Transcription

1 Decorative Project: Location: Cat.No: Type: Lamps: Notes: Qty: Vetro Pendants Power Heads Two-piece cast and machined aluminum outer housing contains electrical components. Hand-blown triplex glass provides an even spread of illumination along the length of the primary glass element. Glass/Acrylic For LED, CFL & INC configurations. Wattage Source CCT Finish Voltage Inner Element Outer Element LW SA U Decorative Pendant W LW LED K K K K SA Satin Aluminum U Universal V/V PG " Opal Glass (required for all glass options) PA " Opal Acrylic* (required for all acrylic options) GL Clear Glass GL " Clear Glass GLA Clear Acrylic GLA " Clear Acrylic Wattage Source Voltage Finish SA Decorative Pendant /W CFL -pin triple tube Universal V/V * Do not use with acrylic accessories (PA, GLA, or GLA). SA Satin Aluminum Complete LED fixture consists of Power Head + Inner Element + Outer Element (optional) + Suspension Kit. Suspension Kits Featuring fixture matching Satin Aluminum finish. ⅝" ⅝" Clear jacketed steel braided power cord, metal aircraft cable and matching canopy. SK Cable / Cord kit - Includes solid aluminum lobster claws to neatly secure the steel jacketed power cord to the aircraft cable (ft. length). SK Cable / Cord kit - Includes solid aluminum lobster claws to neatly secure the steel jacketed power cord to the aircraft cable (ft. length). SKX Cable / Cord kit - Same specifications as SK (for LED version only). Includes -Wire configuration for optional -V diing. ST Stem kit - Stem with matching canopy (ft. length, /" dia.). ST Stem kit - Stem with matching canopy (ft. length, /" dia.). ST ST Swivel Joint Steel Tubing ⅝" ½" SK SK " TM CTC ¾" CTC Close-to- Kit - Includes matching canopy (" length). TM Track Mounting Kit - Mounts to Lightolier Lytespan Track and includes clear jacketed steel braided power cord and metal aircraft cable (ft. length). SMK Surface Mount Kit - Mounts directly to the ceiling (- " dia.)..indd / page of

2 " and " Pendants Features. Power Head: Comprised of die-cast and extruded aluminum components with a brushed clear lacquer finish.. Backplate: Die Cast Aluminum, Brushed and Clear Lacquer Finish.. Inner Element: a primary diffuser comprised of Triplex hand blown glass (PG) or opal acrylic (PA).. Outer Element: a diameter (GL) or " diameter (GL) cylindrical section of clear extruded glass with polished edges. A diameter (GLA) or " diameter (GLA) cylindrical section of clear acrylic is also available. All outer assemblies come with a die-cast aluminum holder ring with stainless steel support pins.. Luminaire Mounting: Luminaire can be suspended from ceiling using clear metallic straight cord/cable with canopy (SK/ SK), stem with canopy (ST/ST), closeto-ceiling (CTC) or track mounting (TM) suspension kits. Lamping LED: W Max. (+/-%) Voltage Frequency LED Drive Current Power THD Power Factor V /Hz ma W <% >. V /Hz ma W <% >. Incandescent: W Max. T mini-candelabra. Compact Fluorescent: /W Max. -pin Triple tube. General Electric Osram/Sylvania Philips () W Triple Tube -Pin (Amalgam) CFL Lamp FTBX/*/A/P CFDT/E/IN/* PL-TW/*/P/ALTO () W Triple Tube -Pin (Amalgam) CFL Lamp FTBX/*/A/P CFDT/E/IN/* PL-TW/*/P/ALTO * Manufacturers color temperature designation. Electrical Diing: -V diing. LED Board: Array of high brightness white LEDs. LED Thermal Management: Heat sink design maintains junction temperature for consistent, reliable performance and, hour lifetime at % lumen maintenance. LED Electronic Power Supply: or V, /Hz, encased, overload and short circuit protected, thermal regulation to protect against overheating, sound rating A, - C minimum starting temp, C maximum operating temp. Incandescent: E Base, porcelain, nickel plated copper alloy screw shell. Compact Fluorescent: /W triple tube: GXq- Base. All CFL configurations offer high impact thermoset polymers with brass contacts. CFL Ballasts Watts TTT Watts TTT Voltage V V V V Watts (max) W W W W Amps (max). A. A. A. A Labels culus Listed. Suitable for damp locations..indd / page of

3 " " " " " " " " " " " " " " " " and " Pendants " " " INC dimensions " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " SA SA SA PG PG + GL PG + GL " " " SA w/pg (with or without GL/GL), W T mini-candelabra, lms Report: FR Candlepower suary Output : lms Watts: W Spacing Criterion:.indd / page of ** Efficiency =.% ** suary % % % % % Zonal cavity method - Effective floor reflect. = % published procedures. Luminaire Watts =

4 " " " " " " " " " " " " " " " " and " Pendants " " " CFL dimensions " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " SA MXSA MXSA PG (or PA) PG + GL or PA + GLA PG + GL or PA + GLA " " " SA w/pg (with or without GL/GL), W -Pin Triple Tube, lms Report: FR Output : lms Watts: W Spacing Criterion:. Candlepower suary ** Efficiency =.% ** suary % % % % % Zonal cavity method - Effective floor reflect. = % published procedures. Luminaire Watts = SA w/pg (with or without GL/GL), W -Pin Triple Tube, lms Report: FR Candlepower suary Output : lms Watts: W Spacing Criterion:..indd / page of ** Efficiency =.% ** suary % % % % % Zonal cavity method - Effective floor reflect. = % published procedures. Luminaire Watts =

5 " and " Pendants LED dimensions " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Output : Watts: Efficacy: CCT : CRI: " " " lms. W. lm/w K > (min) %Luminaire " " " " " " % % % % % % Candela Array " " Vertical Angles " " " " " " " " " " Angle Mean CP Angle CP Mean " " " Report: GFR PG + GL or PA + GLA LWSAU " PG + GL or PA + GLA " " LWSAU w/pg (with or without GL/GL), W, lms LWSAU " " " PG (or PA) LWSAU " " % % % % " " " " " " Zonal cavity method - Effective floor reflect. = % " " ". Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. Luminaire with glass tested by relative photometric method.. Wattage: controlled to within %. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C.- : Specifications for the Chromaticity of Solid State Lighting Products. Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires.indd / page of Philips Lighting, North America Corporation Franklin Square Drive, Somerset, NJ Tel. -- Imported by: Philips Lighting, A division of Philips Electronics Ltd. Hillmount Rd, Markham, ON, Canada LC S Tel. --