3.3 HP 111- E HIGH-PERFORMANCE BUTTERFLY VALVE HP 111- E TECHNICAL DATA

Transcription

1 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face: EN Series 20 (DIN 202 T 1) ISO 72 Series 20 (DIN 202 T 1) API 09 Table 1 BS 1 Series NF E Flange accommodation: DIN 201 PN 10/1 DIN 22/ ANSI B 1., Class AWWA C 207 AS 2129 Table D and E BS 10 Table D and E JIS B JIS Flange Surface Design: DIN 22, Form A-E, ANSI RF Top flange: EN ISO 211 NF E Marking: DIN EN 19 Tightness check: - for R-PTFE Sitz: DIN 20-BO (eakage Rate 1) - for Inconel Sitz: DIN 20-BN (eakage Rate 1) ISO 20, Category API 9 Table ANSI B 1-10, Class VI Temperature range: 19 C to + 0 C higher temperatures on request Differential pressure: see Pressure/Temp. Diagram Vacuum: >10-2 mbar FEATURES - Shut-off and control of gaseous and liquid media - Disc and shaft have double-eccentric bearing - Centering pieces can be used as installation aid - Two seat ring systems available: R-PTFE and Inconel-FS - Seal variants: soft-sealing (R-PTFE) 20 C max. metallic sealing (Inconel) 0 C max. - Maintenance-free - ong service life, even at high switching frequencies - FIRE SAFE BS 7 PART 2 GENERA APPICATIONS - Chemical and petrochemical industries - Hot water and steam systems - District heat supply - Vacuum systems - Shipbuilding - Gas process technology - Food industries - Heavy duty services The splitted shaft design allows better flow characteristics up to a nominal pressure of 19 bar. HP 111- E.

2 H1 G G EBRO C B A D Z1 Z2 F H2 Optional shaft end: double flat acc. to EN ISO 211 HP 111-E with centering pieces E 0 Dimensions A B C D E F Flange G H1 G H2 Z1 Z F / F F F F F F min. Pipe-Ø ,,,9 7, 11, 1, 2,

3 ACTUATORS HP 111- E WORM GEAR FOR PTFE-SEAT 0- Gear H J 2- II III IV , 2, 2, J FOR INCONE-SEAT Gear H J II III IV , 2,, The dimensioning of actuators refers to an operating pressure of 10 bar. H EECTRIC ACTUATOR FOR PTFE-SEAT Type E E 110 H J M ,0 1,0 FOR INCONE-SEAT Type H J M E E ,0 1,0 The dimensioning of actuators refers to an operating pressure of 10 bar.

4 ACTUATORS HP 111- E PNEUMATIC DOUBE ACTING FOR PTFE-SEAT Type H J EB 10 EB EB ,7 2,, J FOR INCONE-SEAT H Type H J EB 10 EB EB 1 11 EB ,7 2,,, The dimensioning of actuators refers to an operating pressure of 10 bar and a control air pressure of bar. EBRO PNEUMATIC SPRING RETURN FOR PTFE-SEAT 0-2- EBF H J EB 10 EB EB 1 11 EB EB ,0,0 7,7 1, 2, J FOR INCONE-SEAT H EBF H J EB EB 1 11 EB EB ,0 7,7 1, 2, The dimensioning of actuators refers to an operating pressure of 10 bar and a control air pressure of bar. EBRO SWITCH BOX SERIES MS/NS MS: Switch Box with integrated micro limit switches. NS: Switch Box with integrated proximity switches. I II

5 MATERIA SPECIFICATION AND PARTS IST Pt Description Body Carbon Steel Disc Clamping ring Steel Upper Shaft ower Shaft Seat ring R-PTFE Inconel Shaft bearing Gland flange Thrust collar Spacer sleeve Suppor. washer Set screw Shaft seal Graphite PTFE Hex.-socket screw Material GP20GH(GS-C2N) G-XCrNiMo19-11 G-XCrNiMo19-11 S2JR (RSt7-2) XCrNiMo XCrNiMo1--1 XCrNiCuNb1- XCrNiMo1--1 PTFE-Compound Inconel XCrNiMoTi XCrNiMo G-XCrNiMo19-11 XCrNi1-10 XCrNiMoTi XCrNiMoTi A-70 A-70 Material-No nitrite 1.01/PTFE ASTM WCB CFM CFM 2-C 1 1 Ti 1 CFM 0 1 Ti 1 Ti BM Pt Description Material Threaded pin A2-70 Hex. nut A2 Graphit seal (for metal seat) Graphite Belleville spr. washer Spring Steel Cover plate Segmente Seal Graphite PTFE NBR FPM Hex.-socket screw Bracket Hex. bolt Hex. nut Shaft adapter Set screw Centering piece Countersunk screw 0CrV X10CrNi1- GXCrNiMo19-11 XCrNiMoTi A-70 GXCrNiMo19-11 A2-70 A2 GX2CrNiMoN2-7- A2-70 XCrNiMoTi Material-No nitrite A Other materials upon request. ASTM B 01 Ti 1 Ti SS

6 TORQUE - The values specified are based on the initial breakaway torque. (disc disengages from seat, torque than drops) /2 10 [bar] R-PTFE Inconel Operating Pressure 1 [bar] R-PTFE Inconel All Values in Nm PRESSURE /TEMPERA- TURE DIAGRAM 2 Pressure control line for GS-C2 body material and metal seat Pressure control line for 1.0 body material and metal seat Pressure control line for R-PTFE-seat The diagram illustrates the performance of the standard version of our valve type HP. Valves for higher pressure or deviating temperature are available upon request. Differential Pressure PS (bar) ASTM SA-1 CFM ASTM SA-21 WCB R-PTFE Temperature TS ( C) v-vaues - The v -value (m per hour) is the flow of water at a temperature of C to 0 C (1 F to F) Δp of 1 bar. - The v -values specified are based on tests carried out by the Delft Hydraulics aboratoriers, the Netherlands. - Permissible velocity of flow Vmax, m/s for liquids and Vmax 70 m/s for gases /2 Opening angle For further values, please contact our engineers. post@ebro-armaturen.com D