Quality for trade and industry

Transcription

1 MEMBER OF EWM GROUP Quality for trade and industry Product catalogue st quarter Offers and promotions see Welding machines and accessories MMA MIG/MAG TIG 2-YEAR WARRANTY Made in EU

2 TEAMWELDER Top quality and certified safety For high-quality welding results and maximum safety you need the right welding machine and coordinated accessories. TEAMWELDER offers only the very best to its customers, ensuring they are able to achieve top-quality welding results. Benefit from the years of experience and advanced welding technology expertise demonstrated by this modern manufacturer. Initially a specialist in the production of high-quality components, TEAMWELDER very quickly developed into a highly competent manufacturer of complete welding machines and corresponding welding accessories. With over 20 years experience as a certified manufacturer, we guarantee you will receive a long-lasting quality product with sophisticated functionality that is excellent value for money. Audits and certificates prove that we meet the highest standards when it comes to safety, quality and the capacity to deliver. We want to inspire you try us and see for yourself! 2-YEAR WARRANTY st Q

3 TEAMWELDER Product range Contents MMA welding machines Inverters MMA 160, up to 160 A 4 MMA 220 CEL, up to 220 A 6 MMA 300 CEL, up to 300 A 8 MIG/MAG welding machines Inverters Infinitely adjustable MIG 180 D2 Synergic, up to 180 A 10 MIG 180 D3 Synergic, up to 180 A 12 MIG 300 D3 Synergic, up to 300 A 14 Accessories 20 MIG/MAG welding machines Step switch controlled MIG 250 S, up to 250 A 16 MIG 300 S, up to 300 A 16 MIG 302 S Synergic, up to 300 A 18 Accessories 20 TIG welding machines Inverters TIG 180 DC, up to 180 A 24 TIG 180 AC/DC, up to 180 A 26 Accessories 28 i Information general information 30 Order form st Q 3

4 MMA welding machines Up to 160 A Inverters MMA 160 The lightweight, powerful MMA welding machine ideal for construction site use Energy cost-saving inverter technology High efficiency Standby function Only 4.8 kg mobile enough for any operating site! Practical carrying strap for effortless transport on stairs, ladders, in steel construction and on scaffolds TIG lift arc 100% suitable for construction sites Large mains voltage range for unlimited operation with generators and mains leads up to 75 m long Splash-water protected as per IP 23 Robust aluminium casing with impact-resistant plastic cover on front and rear Operating elements in protected location Safe and reliable Overvoltage protection: No damage to machine if inadvertently connected to 400 V mains voltage Temperature overload protection Dust-protected electronics The way professionals weld Safe ignition thanks to a high open circuit voltage and automatic hot start Stable arc High duty cycle Welding machine with ready-to-weld accessories Item no. Set MMA 160 MMA 160 set accessories MMA inverter welding machine, portable MMA 160 welding site equipment: electrode holder, workpiece lead, hand shield, chipping hammer, wire brush Ready-to-weld set price Accessories TW-TIG 9V GD HFL 4M DMR TN 200BAR/MIX 16L BWG UNI EH 16qmm 4m TIG welding torch with rotary gas valve, 4 m reach, gas cooled 200 bar pressure regulator with manometer, 16 l/min, W21, 8x1/14" RH; G1/4" Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l Electrode holder with 4 m connection cable WK16qmm-4m/K 4 m workpiece lead

5 Control advantages Welding procedure selection MMA TIG lift arc Indicators Ready for operation Interference Welding current adjustment Large rotary knob for safe operation, even with gloves Antistick no electrode annealing If the electrode sticks, e.g. due to a low welding current, the system automatically switches to the minimum current level Automatic hot start Safe ignition and re-ignition of stick electrode Arcforce Ensures optimum welding properties of the various electrode types: rutile (R), rutilebasic (RB), basic (B), rutile-cellulose (RC) Technical data Areas of application MMA 160 Setting range for welding current 10 A 160 A MMA TIG Duty cycle at ambient temperature 40 C 40 C 30% DC A 35% DC 150 A - 60% DC 120 A 130 A 100% DC 100 A 100 A cosφ 0.99 Efficiency 86% Open circuit voltage 105 V Mains fuse (slow-blow) 1 x 16 A Mains voltage (tolerances) 1 x 230 V (-40% to +15%) Max. connected load 6.4 kva Rec. generator rating 8.6 kva Dimensions L x W x H [mm] 430 x 115 x 225 Weight, approx. 4.8 kg Protection classification IP 23 Insulation class H Standards IEC ; -10/CE/ S-Safety sign/emc Class A n Repair work in workshops, for assembly work and on construction sites n Outdoor and offshore welding work n Metal construction (stairs and railings), light steel construction n Agricultural and forestry operations n Municipal and mining operations n Building construction and road-building n DIYers Materials n Steel n CrNi Stick electrodes n mm dia. n Rutile (R), rutile-basic (RB), basic (B), rutilecellulose (RC) 5

6 MMA welding machines Up to 220 A Inverters MMA 220 CEL 100% safe for vertical-down welding the MMA welding machine for tough applications Easy to transport and maximum performance at any operating site Low weight and compact design High duty cycle Practical carrying strap Made for MMA professionals 100% safe for vertical-down cellulose electrode welding Reproducible, safe ignition thanks to a high open circuit voltage and hot start Stable arc, easy-to-control weld pool Energy cost-saving inverter technology TIG lift arc High efficiency Standby function Remote control connection 100% suitable for construction sites Large mains voltage range for unlimited operation with generators and mains leads up to 100 m long Splash-water protected as per IP 23 Robust aluminium casing with impact-resistant plastic cover on front and rear Operating elements in protected location For welding current adjustment Safe and reliable Temperature overload protection Dust-protected electronics Welding machine with ready-to-weld accessories Item no. Set MMA 220 CEL EH 35qmm 4m MMA inverter welding machine, portable Electrode holder with 4 m connection cable WK35qmm-4m/K 4 m workpiece lead Ready-to-weld set price Accessories TW-TIG 17V GD HFL 4M DMR TN 200BAR/MIX 16L BWG UNI TIG welding torch with rotary gas valve, 4 m reach, gas cooled 200 bar pressure regulator with manometer, 16 l/min, W21, 8x1/14" RH; G1/4" Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l RT1 19POL Remote control, welding current RA5 19POL 5m RA5 19POL 10m SE 6010 CEL 5.0 kg/package 3.2x350 mm 5 m connection cable for remote control 10 m connection cable for remote control Stick electrodes dia. 3.2 x 350 mm, unalloyed, cellulose coated

7 Control advantages Self-explanatory operating panel One-knob operation and LED user guidance Large rotary knob for safe operation, even with gloves Reproducible setting and display Welding current Welding parameters Welding procedure selection MMA TIG lift arc Arcforce adjustment (welding characteristics) depending on the electrode type Rutile (R) Rutile-basic (RB) Basic (B)/Rutile-cellulose (RC) Cellulose (C) Indicators Ready for operation - Interference Antistick no electrode annealing If the electrode sticks, e.g. due to a low welding current, the system automatically switches to the minimum current level Infinite adjustment of hot start current and time Safe ignition and re-ignition of the electrode, which prevents lack of fusion Top quality at start of seam (no excess weld metal) Technical data Areas of application MMA 220 CEL Setting range for welding current 10 A 220 A MMA TIG Duty cycle at ambient temperature 40 C 40 C 30% DC 220 A 220 A 60% DC 160 A 160 A 100% DC 140 A 140 A cosφ 0.99 Efficiency 89% Open circuit voltage 97 V Mains fuse (slow-blow) 3 x 16 A Mains voltage (tolerances) 3 x 400 V (-25% to +20%) Max. connected load 8 kva Rec. generator rating 10.8 kva Dimensions L x W x H [mm] 470 x 135 x 250 Weight, approx. 8.9 kg Protection classification IP 23 Insulation class H Standards IEC ; -10/CE/ S-Safety sign/emc Class A n Production and repair work in workshops, for assembly work and on construction sites n Outdoor and offshore welding work n Metal construction (stairs and railings), steel construction n Machine, plant and container construction n Shipbuilding n Municipal and mining operations n Building construction and road-building n Pipe and pipeline construction Materials n Steel n CrNi n Cast materials Stick electrodes n mm dia. n Rutile (R), rutile-basic (RB), basic (B), rutilecellulose (RC), cellulose (C) 7

8 MMA welding machines Up to 300 A Inverters MMA 300 CEL 100% safe for vertical-down welding made for pipe construction! Easy to transport and maximum performance at any operating site Low weight and slim design High duty cycle Practical holding rod and handles, plus carrying strap for effortless transport Energy cost-saving inverter technology High efficiency Standby function Perfect for pipe construction 100% safe for vertical-down cellulose electrode welding Reproducible, safe ignition thanks to a high open circuit voltage and hot start function Stable arc, easy-to-control weld pool TIG lift arc Remote control connection For welding current adjustment 100% suitable for construction sites Safe and reliable Large mains voltage range for unlimited operation with generators and mains leads up to 100 m long Splash-water protected as per IP 23 Indestructible metal casing Operating elements in protected location Temperature overload protection Dust-protected electronics Set Welding machine with ready-to-weld accessories MMA 300 CEL EH 50qmm 4m MMA inverter welding machine, portable Electrode holder with 4 m connection cable Item no WK50qmm-4m/K 4 m workpiece lead Ready-to-weld set price Accessories TW-TIG 26V GD HFL 4M DMR TN 200BAR/MIX 16L BWG UNI TIG welding torch with rotary gas valve, 4 m reach, gas cooled 200 bar pressure regulator with manometer, 16 l/min, W21, 8x1/14" RH; G1/4" Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l RT1 19POL Remote control, welding current RA5 19POL 5m RA5 19POL 10m SE 6010 CEL 5.0 kg/package 4.0x350 mm 5 m connection cable for remote control 10 m connection cable for remote control Stick electrodes dia. 4.0 x 350 mm, unalloyed, cellulose coated

9 Control advantages Self-explanatory operating panel One-knob operation and LED user guidance Large rotary knob for safe operation, even with gloves Reproducible setting and display Welding current Welding voltage Hold function for simple reading of welding current and voltage after welding Welding procedure selection MMA TIG lift arc Indicators Ready for operation - Interference Antistick no electrode annealing If the electrode sticks, e.g. due to a low welding current, the system automatically switches to the minimum current level Arcforce adjustment (welding characteristics) depending on the electrode type Rutile (R) Rutile-basic (RB) Basic (B)/Rutile-cellulose (RC) Cellulose (C) Infinite adjustment of hot start current and time Safe ignition and re-ignition of the electrode, which prevents lack of fusion Top quality at start of seam (no excess weld metal) Technical data Areas of application MMA 300 CEL Setting range for welding current 10 A 300 A MMA TIG Duty cycle at ambient temperature 40 C 40 C 25% DC 300 A - 30% DC A 60% DC 220 A 240 A 100% DC 170 A 190 A cosφ 0.99 Efficiency 86% Open circuit voltage 107 V Mains fuse (slow-blow) 3 x 16 A Mains voltage (tolerances) 3 x 400 V (-25% to +20%) Max. connected load 12.1 kva Rec. generator rating 16.3 kva Dimensions L x W x H [mm] 515 x 185 x 350 Weight, approx kg Protection classification IP 23 Insulation class H Standards IEC ; -10/CE/ S-Safety sign/emc Class A n Production and repair work in workshops, for assembly work and on construction sites n Pipe and pipeline construction n Outdoor and offshore welding work n Steel construction n Machine, plant and container construction n Shipbuilding n Mining operations n Building construction and road-building Materials n Steel n CrNi n Cast materials Stick electrodes n mm dia. n Rutile (R), rutile-basic (RB), basic (B), rutilecellulose (RC), cellulose (C) 9

10 MIG/MAG welding machines Up to 180 A Inverters Infinitely adjustable MIG 180 D2 Synergic The mobile all-rounder featuring three welding procedures MIG/MAG, MMA and TIG Energy cost-saving inverter technology High efficiency Standby function D roll drive with large 37 mm drive rolls Reliable wire feeding Tool-free changing of wire feed rolls Currentless inching Easy to transport Convenient carrying handle Low weight and compact design Simple, tool-free changing of welding current polarity Ideal for welding self-shielded flux cored wires without a gas cylinder in the open air Easy servicing and maintenance Plug-in welding torch (Euro torch connector) for easy changing of the steel and plastic liners 100% suitable for construction sites Splash-water protected as per IP 23 Protective strips on the side walls Large mains voltage range for unlimited operation with generators and mains leads up to 75 m long Impact-resistant plastic casing with aluminium side walls Safe and reliable Overvoltage protection: No damage to machine if inadvertently connected to 400 V mains voltage Temperature overload protection Dust-protected electronics Set Welding machine with ready-to-weld accessories Multiprocess MIG/MAG welding machine, compact, gas cooled, portable, MIG 180 D2 Synergic Euro torch connector MIG/MAG welding torch, 4 m reach, TW-MIG 15G 4m EZA gas cooled, Euro torch connector Item no WK25qmm-4m/K 4m workpiece lead DMR TN 200BAR/MIX 35L 200 bar pressure regulator with manometer, 35 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 3m 3 m gas hose Ready-to-weld set price Accessories TW-TIG 17 GZ 1T HFL 4M EZA EH 35qmm 4m BWG UNI SW 70S G3 5.0 kg/spool 0.8 mm FCW 71T SELFSHIELD 5.0 kg 0.9 mm TIG welding torch, 4 m reach, gas cooled, Euro torch connector Electrode holder with 4 m connection cable Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l Solid wire electrode 0.8 mm, unalloyed, plastic spool S200 5 kg Flux cored wire electrode 0.9 mm, unalloyed, plastic spool S200, 5 kg

11 Control advantages 35 pre-set Synergic characteristics (JOBs) for quick finding of the welding task: MIG/MAG welding with solid and flux cored wire electrodes MIG brazing TIG lift arc MMA Indicators for Welding current Welding voltage Wire feed speed Plate thickness Hold function Polarity, interference, excess temperature Currentless gas test Synergic one-knob operation Super-easy selection of the operating point, e.g. via plate thickness Selection Arc dynamics (choke effect) Capable of Synergic one-knob operation and manual twin-knob operation Operating modes Non-latched Latched Infinitely adjustable Arc length correction Arc dynamics (hard/soft choke effect) Technical data MIG 180 D2 Synergic Setting range, welding current 5 A 180 A MIG/MAG MMA TIG Duty cycle at ambient temperature 40 C 40 C 40 C 25% DC 180 A % DC A 35% DC A - 60% DC 120 A 110 A 140 A 100% DC 100 A 100 A 120 A cosφ 0.99 Efficiency 86% Open circuit voltage 90 V Mains fuse (slow-blow) 1 x 16 A Mains voltage (tolerances) 1 x 230 V (-40% to +15%) Max. connected load 6.4 kva Rec. generator rating 7.5 kva Wire feed speed m/min Drive(ex works for mm steel wire) 4 rolls (37 mm) Max. wire spool diameter 200 mm/d200 (5 kg) Dimensions L x W x H [mm] 620 x 300 x 360 Weight, approx. 15 kg Protection classification IP 23 Insulation class H Standards IEC ; -5; -10/CE/S- Safety sign/emc Class A Areas of application n Repair work in workshops, for assembly work and on construction sites n Outdoor and offshore welding work n Metal, conservatory and window construction n Machine, plant and container construction n Façade, heating and ventilation construction n Vehicle body repair n Agricultural and forestry operations n Municipal and mining operations n Building construction and road-building n Service vehicle equipment Materials n Steel n CrNi Solid and flux cored wire electrodes n 0.8, 0.9 and 1.0 mm dia. 11

12 MIG/MAG welding machines Up to 180 A Inverters Infinitely adjustable MIG 180 D3 Synergic The mobile and efficient all-rounder featuring three welding procedures MIG/MAG, MMA and TIG Energy cost-saving inverter technology High efficiency Standby function 4-roll drive with large 37 mm drive rolls Reliable wire feeding Tool-free changing of wire feed rolls Currentless inching Effortless transport Low weight Practical holding bar and handles Practical torch holder Simple, tool-free changing of welding current polarity D % suitable for construction sites Impact-resistant plastic casing with aluminium side walls Splash-water protected as per IP 23 Large mains voltage range for unlimited operation with generators and mains leads up to 75 m long Safe and reliable Operating elements in protected location Temperature overload protection Dust-protected electronics Overvoltage protection: No damage to machine if inadvertently connected to 400 V mains voltage Ideal for welding self-shielded flux cored wires without a shielding gas cylinder in the open air Easy servicing and maintenance Plug-in welding torch (Euro torch connector) for easy changing of the steel and plastic liners Set Welding machine with ready-to-weld accessories Multiprocess MIG/MAG welding machine, compact, gas cooled, portable, MIG 180 D3 Synergic Euro torch connector MIG/MAG welding torch, 4 m reach, TW-MIG 15G 4m EZA gas cooled, Euro torch connector Item no WK25qmm-4m/K 4m workpiece lead DMR TN 200BAR/MIX 35L 200 bar pressure regulator with manometer, 35 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2m 2 m gas hose AK300 Wire spool adapter B Ready-to-weld set price inclusive Accessories TW-TIG 17 GZ 1T HFL 4M EZA EH 35qmm 4m BWG UNI SW 70S G3 15 kg/spool 1.0 mm FCW 71T SELFSHIELD 15 kg 1.2 mm TIG welding torch, 4 m reach, gas cooled, Euro torch connector Electrode holder with 4 m connection cable Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l Solid wire electrode 1.0 mm, unalloyed, wire spool B kg Flux cored wire electrode 1.2 mm, unalloyed, wire spool B300, 15 kg

13 Control advantages 35 pre-set Synergic characteristics (JOBs) for quick finding of the welding task: MIG/MAG welding with solid and flux cored wire electrodes MIG brazing TIG lift arc MMA Indicators for Welding current Welding voltage Wire feed speed Plate thickness Hold function Polarity, interference, excess temperature Currentless gas test Synergic one-knob operation Super-easy selection of the operating point, e.g. via plate thickness Selection Arc dynamics (choke effect) Capable of Synergic one-knob operation and manual twin-knob operation Operating modes Non-latched Latched Infinitely adjustable Arc length correction Arc dynamics (hard/soft choke effect) Technical data Setting range, welding current MIG 180 D3 Synergic 5 A 180 A MIG/MAG MMA TIG Duty cycle at ambient temperature 40 C 40 C 40 C 25% DC 180 A % DC A 35% DC A - 60% DC 120 A 110 A 140 A 100% DC 100 A 100 A 120 A cosφ 0.99 Efficiency 86% Open circuit voltage Mains fuse (slow-blow) 80 V 1 x 16 A Mains voltage (tolerances) 1 x 230 V (-40% to +15%) Max. connected load Rec. generator rating Wire feed speed Drive (ex works for mm steel wire) Max. wire spool diameter 6.4 kva 7.5 kva 1 20 m/min 4 rolls (37 mm) 300 mm/d300 (15 kg) Dimensions L x W x H [mm] 625 x 300 x 480 Weight, approx. 22 kg Protection classification IP 23 Insulation class Standards H IEC ; -5; -10/CE/S- Safety sign/emc Class A Areas of application n Production and repair work in workshops, for assembly work and on construction sites n Outdoor and offshore welding work n Steel and other metal construction n Conservatory and window construction n Façade, heating and ventilation construction n Vehicle body repair n Municipal and mining operations n Building construction and road-building Materials n Steel n CrNi Solid and flux cored wire electrodes n 0.8, 0.9 and 1.0 mm dia. 13

14 MIG/MAG welding machines Up to 300 A Inverters Infinitely adjustable MIG 300 D3 Synergic The powerful multi-talent featuring three welding procedures MIG/MAG, MMA and TIG Energy cost-saving inverter technology High efficiency Standby function 4-roll drive with large 37 mm drive rolls Flexible in use for production and assembly High duty cycle Practical holding rod and handles for effortless transport Practical torch holder Reliable wire feeding Tool-freechanging of wire feed rolls Currentless inching Simple, tool-free changing of welding current polarity D % suitable for construction sites Impact-resistant plastic casing with aluminium side walls Splash-water protected as per IP 23 Large mains voltage range for unlimited operation with generators and mains leads up to 100 m long Safe and reliable Operating elements in protected location Temperature overload protection Dust-protected electronics Ideal for welding self-shielded flux cored wires without a shielding gas cylinder in the open air Easy servicing and maintenance Plug-in welding torch (Euro torch connector) for easy changing of the steel and plastic liners Set Welding machine with ready-to-weld accessories Item no. MIG 300 D3 Synergic Multiprocess MIG/MAG welding machine, compact, gas cooled, portable, Euro torch connector TW-MIG 36G 4m EZA MIG/MAG welding torch, 4 m reach, gas cooled, Euro torch connector WK50qmm-4m/K 4 m workpiece lead DMR TN 200BAR/MIX 35L 200 bar pressure regulator with manometer, 35 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2m 2 m gas hose AK300 Wire spool adapter B Ready-to-weld set price Accessories TW-TIG 26 GZ 1T HFL 4M EZA EH 50qmm 4m BWG UNI SW 70S G3 15 kg/spool 1.2 mm FCW 71T SELFSHIELD 15 kg 1.2 mm TIG welding torch, 4 m reach, gas cooled, Euro torch connector Electrode holder with 4 m connection cable Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l Solid wire electrode 1.2 mm, unalloyed, wire spool B kg Flux cored wire electrode 1.2 mm, unalloyed, wire spool B300, 15 kg

15 Control advantages 35 pre-set Synergic characteristics (JOBs) for quick finding of the welding task: MIG/MAG welding with solid and flux cored wire electrodes MIG brazing TIG lift arc MMA Indicators for Welding current Welding voltage Wire feed speed Plate thickness Hold function Polarity, interference, excess temperature Currentless gas test Synergic one-knob operation Super-easy selection of the operating point, e.g. via plate thickness Selection Arc dynamics (choke effect) Capable of Synergic one-knob operation and manual twin-knob operation Operating modes Non-latched Latched Infinitely adjustable Arc length dynamic correction (choke effect) Arc dynamics (hard/soft choke effect) Technical data MIG 300 D3 Synergic Setting range, welding current 5 A 300 A MIG/MAG MMA TIG Duty cycle at ambient temperature 40 C 40 C 40 C 40% DC 300 A 300 A 300 A 60% DC 260 A 260 A 260 A 100% DC 200 A 200 A 200 A cosφ 0.99 Efficiency 88% Open circuit voltage 93 V Mains fuse (slow-blow) 3 x 16 A Mains voltage (tolerances) 3 x 400 V (-25% to +20%) Max. connected load 11 kva Rec. generator rating 14.9 kva Wire feed speed 1 20 m/min Drive (ex works for mm steel wire) 4 rolls (37 mm) Max. wire spool diameter 300 mm/d300 (15 kg) Dimensions L x W x H [mm] 625 x 300 x 480 Weight, approx. 29 kg Protection classification IP 23 Insulation class F Standards IEC ; -5; -10/CE/S- Safety sign/emc Class A Areas of application n Production and repair work in workshops, for assembly work and on construction sites n Outdoor and offshore welding work n Steel and other metal construction n Machine, plant and container construction n Façade, heating and ventilation construction n Mining operations n Building construction and road-building Materials n Steel n CrNi n Aluminium Solid and flux cored wire electrodes n 0.8, 0.9, 1.0 and 1.2 mm dia. 15

16 MIG/MAG welding machines Up to 300 A Step switch controlled MIG 250 S MIG 300 S Robust, compact and high powered step switch controlled MIG/MAG welding machines Practical rubber mat For placing tools on the machine D 300 Robust and long-lasting Solid sheet steel casing Splash-water protected as per IP 23 High-quality copper welding transformer and choke Mobile Convenient hand grip Large guide and fixed castors Mount for shielding gas cylinder (200 bar/20 litre) with double shielding gas cylinder retainer 4-roll drive with large 37 mm drive rolls Reliable wire feeding Tool-free changing of wire feed rolls Currentless inching Perfect ignition and welding Fine voltage adjustment Large drive rolls with reliable wire feeding Wire burn-back function Easy servicing and maintenance Plug-in workpiece lead and welding torch (Euro torch connector) for easy changing of the steel and plastic liners Safe and reliable Temperature overload protection Set Welding machine with ready-to-weld accessories Step switch controlled MIG/MAG welding MIG 250 S machine, compact, gas cooled, Euro torch connector Step switch controlled MIG/MAG welding MIG 300 S machine, compact, gas cooled, Euro torch connector MIG/MAG welding torch, 4 m reach, TW-MIG 36G 4m EZA gas cooled, Euro torch connector Item no WK35qmm-4m/K 4 m workpiece lead DMR TN 200BAR/MIX 35L 200 bar pressure regulator with manometer, 35 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2m 2 m gas hose AK300 Wire spool adapter B Ready-to-weld set price MIG 250 S Ready-to-weld set price MIG 300 S Accessories SW 70S G3 15 kg/spool 1.0 mm Solid wire electrode 1.0 mm, unalloyed, wire basket spool B kg

17 Control advantages Self-explanatory operating panel with twinknob operation Indicator Lights up when machine is ready for operation Infinite adjustment of the wire feed speed Operating mode selection Non-latched Latched Spot welding Interval welding Infinite adjustment of the welding time (spot/interval) Infinite adjustment of the pause time (interval) Technical data MIG 250 S MIG 300 S Setting range, welding current 30 A 250 A 30 A 300 A MIG/MAG MIG/MAG Duty cycle at ambient temperature 40 C 40 C 20% DC 250 A 300 A 100% DC 125 A 150 A Open circuit voltage 35 V 40 V Mains fuse (slow-blow) 3 x 16 A 3 x 16 A Mains voltage (tolerances) 3 x 400 V (-15% to +15%) 3 x 400 V (-15% to +15%) Max. connected load 8.8 kva 11.6 kva Rec. generator rating 11.9 kva 15.7 kva Wire feed speed m/min m/min Drive (ex works for mm steel wire) 4-roll 4-roll Max. wire spool diameter 300 mm/d300 (15 kg) 300 mm/d300 (15 kg) Dimensions L x W x H [mm] 880 x 385 x x 385 x 610 Weight, approx. 60 kg 72 kg Switching steps 8 12 Protection classification IP 23 IP 23 Insulation class H H Standards IEC ; -5; -10/CE/S-Safety sign/emc Class A Areas of application n Production and repair work at the workshop n Steel and other metal construction n Vehicle body repair n Machine, plant and container construction n DIYers Materials n Steel n CrNi Solid and flux cored wire electrodes n 0.8, 0.9, 1.0 and 1.2 mm dia. 17

18 MIG/MAG welding machines Up to 300 A Step switch controlled MIG 302 S Synergic Robust and compact with impressive welding properties the step switch controlled MIG/MAG welding machine Practical rubber mat For placing tools on the machine D 300 Robust and long-lasting Solid sheet steel casing Splash-water protected as per IP 23 High-quality copper welding transformer and choke Mobile 4 lifting eyes as standard, stackable Convenient hand grips Mount for shielding gas cylinder (200 bar/50 l) with low loading edge and double retainer 4-roll drive with large 37 mm drive rolls Reliable wire feeding Tool-free changing of wire feed rolls Easy servicing and maintenance Less soiling in the machine fans only run when needed Plug-in workpiece lead and welding torch (Euro torch connector) for easy changing of the steel and plastic liners Safe and reliable Temperature overload protection Perfect ignition and welding 12 switching steps fine welding voltage setting Optimised welding choke for different materials and gases with 2 tappings (hard and soft) Adjustable wire creep and wire burnback Welding machine with ready-to-weld accessories Item no. MIG 302 S Synergic TW-MIG 36G 4m EZA Step switch controlled MIG/MAG welding machine, compact, gas cooled, Euro torch connector MIG/MAG welding torch, 4 m reach, gas cooled, Euro torch connector Set WK50qmm-4m/K 4 m workpiece lead DMR TN 200BAR/MIX 35L 200 bar pressure regulator with manometer, 35 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2 m 2 m gas hose AK300 Wire spool adapter B Ready-to-weld set price Accessories SW 70S G3 15 kg/spool 1.0 mm Solid wire electrode 1.0 mm, unalloyed, wire basket spool B kg

19 Control advantages 24 pre-set Synergic characteristics (JOBs) for quick finding of the welding task: MIG/MAG welding with solid and flux cored wire electrodes Indicators for Welding voltage Wire feed speed correction Wire feed speed Welding current Plate thickness JOB number (Synergic characteristics) Synergic operation Super-easy selection of the operating point, e.g. via plate thickness Currentless gas test and wire inching Choke tapping specification Hard or soft Operating mode selection Non-latched Latched Spot welding Interval welding Capable of Synergic operation and manual twin-knob operation Hold function for welding current and voltage Infinitely adjustable Wire feed speed, welding current, plate thickness, correction of wire feed speed Sequence parameters: Gas post-flow time, wire burnback, spot and interval times Technical data Areas of application MIG 302 S Synergic Setting range, welding current 30 A 300 A MIG/MAG Duty cycle at ambient temperature 40 C 40% DC 300 A 60% DC 190 A 100% DC 160 A Open circuit voltage Mains fuse (slow-blow) 40 V 3 x 16 A Mains voltage (tolerances) 3 x 400 V (-15% to +15%) Max. connected load Rec. generator rating Wire feed speed Drive (ex works for mm steel wire) Max. wire spool diameter 11.6 kva 15.7 kva m/min 4-roll 300 mm/d300 (15 kg) Dimensions L x W x H [mm] 930 x 460 x 730 Weight, approx. 100 kg Switching steps 12 Protection classification IP 23 Insulation class Standards H IEC ; -5; -10/ CE/S-Safety sign/emc Class A n Production and repair work at the workshop n Steel and other metal construction n Vehicle body repair n Machine, plant and container construction Materials n Steel n CrNi n Aluminium Solid and flux cored wire electrodes n 0.8, 1.0 and 1.2 mm dia. 19

20 MIG/MAG welding machines Accessories and consumables MIG/MAG welding torches TW-MIG 15G 4M MIG/MAG welding torch, gas cooled Gas cooled MIG/MAG welding torch Euro torch connector Ergonomic grip with ball joint Anti-kink spring on grip and Euro torch connector Duty cycle CO A, 60% Duty cycle M A, 60% Equipment ex works: 12 mm dia. gas nozzle, conical Contact tip: M6 x 25, 1.0 mm dia. Description Type Item no. PU per unit MIG/MAG welding torch, 4 m reach, gas cooled, Euro torch connector TW-MIG 15G 4m EZA Gas nozzle, 53 mm long mm dia., highly conical GN NW=9.5mm L=53mm TW-MIG mm dia., conical GN NW=12mm L=53mm TW-MIG mm dia., cylindrical GN NW=16mm L=53mm TW-MIG M6 contact tip, E-Cu, 25 mm long mm dia. CT M6x25 E-Cu Ø=1.0 mm mm dia. CT M6x25 E-Cu Ø=0.8mm Retaining spring HF TW-MIG Contact tip holder, compl. CTH M6x30mm TW-MIG Insulator, Teflon TTOOL MHS Steel and plastic liners can be found on Page 23 20

21 TW-MIG 36G 4M MIG/MAG welding torch, gas cooled Gas cooled MIG/MAG welding torch Euro torch connector Ergonomic grip with ball joint Anti-kink spring on grip and Euro torch connector Duty cycle CO A, 60% Duty cycle M A, 60% Equipment ex works: 16 mm dia. gas nozzle, conical Contact tip: M6 x 28, 1.0 mm dia. Description Type Item no. PU per unit MIG/MAG welding torch, 4 m reach, gas cooled, Euro torch connector TW-MIG 36G 4m EZA Gas nozzle, 84 mm long mm dia., highly conical GN NW=12mm L=84mm TW-MIG mm dia., conical GN NW=16mm L=84mm TW-MIG mm dia., cylindrical GN NW=19mm L=84mm TW-MIG M6 contact tip, E-Cu, 28 mm long mm dia. CT M6 E-Cu Ø=0.8mm mm dia. CT M6 E-Cu Ø=1.0mm mm dia. CT M6 E-Cu Ø=1.2mm M6 contact tip, CuCrZr, 28 mm long, long service life mm dia. CT M6x28 CuCrZr Ø=0.8mm mm dia. CT M6x28 CuCrZr Ø=1mm mm dia. CT M6x28 CuCrZr Ø=1.2mm M6 contact tip for aluminium welding, E-Cu, 28 mm long mm dia. CT M6x28 E-Cu Ø=0.8mm Alu mm dia. CT M6x28 E-Cu Ø=1.0mm Alu mm dia. CT M6x28 E-Cu Ø=1.2mm Alu M8 contact tip, E-Cu, 30 mm long mm dia. CT M8x30 E-Cu Ø=0.8mm mm dia. CT M8x30 E-Cu Ø=1mm mm dia. CT M8x30 E-Cu Ø=1.2mm M8 contact tip, CuCrZr, 30 mm long, long service life mm dia. CT M8x30 CuCrZr Ø=1mm mm dia. CT M8x30 CuCrZr Ø=1.2mm M8 contact tip for aluminium welding, E-Cu, 30 mm long mm dia. CT M8x30 E-Cu Ø=0.8mm Alu mm dia. CTAL M8x30 E-Cu Ø=1.0mm Alu mm dia. CT M8x30 E-Cu Ø=1.2mm Alu Contact tip holder, M6, 28 mm long CTH M6x28mm TW-MIG Contact tip holder, M8, 28 mm long CTH M8x28mm TW-MIG Gas diffuser GD TW-MIG Steel and plastic liners can be found on Page 23 21

22 MIG/MAG welding machines Accessories and consumables Steel drive rolls Replacement drive rolls for steel and CrNi wire (standard steel version, ex works 0.8 and 1.0 mm) Set includes two drive rolls (V-groove) Suitable for MIG 250 S, MIG 300 S, MIG 302 S Synergic, MIG 180 D2 Synergic, MIG 180 D3 Synergic and MIG 300 D3 Synergic Dia. in mm Item no Aluminium conversion kit For conversion from standard steel to aluminium Set includes four drive rolls (U-groove) and two gears Suitable for MIG 300 D3 Synergic and MIG 302 S Synergic Dia. in mm Item no Aluminium drive rolls Replacement drive rolls for aluminium wire Set includes four drive rolls (U-groove) Suitable for MIG 300 D3 Synergic and MIG 302 S Synergic Dia. in mm Item no Flux cored wire conversion kit For conversion from standard steel to flux cored wire Set includes two drive rolls (U-groove), two pressure rolls and two gears MIG 180 D2 Synergic MIG 180 D3 Synergic, MIG 300 D3 Synergic, MIG 302 S Synergic Dia. in mm Item no. Dia. in mm Item no. 0.8/ / / / / / / / Flux cored wire drive and pressure rolls Replacement drive rolls and pressure rolls for flux cored wire Set includes two drive rolls (knurled U-groove) and two pressure rolls (knurled) Suitable for MIG 180 D2 Synergic, MIG 180 D3 Synergic, MIG 300 D3 Synergic and MIG 302 S Synergic Drive rolls Dia. in mm Item no. 0.8/ / / / Pressure rolls Item no

23 Steel liners, insulated Steel liner for steel Insulation prevents gas loss Manufactured to length Description Wire dia. Length Item no. Blue steel liner 0.8 mm 1 mm 4.0 m Red steel liner 1.2 mm 1.6 mm 4.0 m Polyamide (PA) plastic liners, combination Plastic liners for feeding CrNi, aluminium, flux cored and CuSi wires Manufactured to length, with collet and O-ring Description Wire dia. Length Item no. Combined liner, PA 0.8 mm 1 mm 4.0 m Combined liner, PA 1.2 mm 1.6 mm 4.0 m Capillary tube/guide tube Euro torch connectors on our MIG/MAG machines are fitted with a capillary tube for welding torches with a steel liner ex works. If a welding torch is used with a plastic liner and guide tube, the capillary tube must be removed! Capillary tube up to 1.2 mm wire diameter Used with steel liners for steel Guide tube up to 1.2 mm wire diameter Used with plastic liners for CrNi and aluminium and for CuSi (brazing) Welding machines Item no. Item no. MIG 300 D3 Synergic MIG 180 D3 Synergic MIG 302 S Synergic MIG 180 D2 Synergic MIG 250 S, MIG 300 S

24 DC TIG welding machines Up to 180 A Inverters TIG 180 DC The lightweight and powerful DC TIG welding machine for assembly work Only 6.9 kg easy to transport to any operating site Practical carrying strap for effortless transport on ladders, in steel construction and on scaffolds Energy cost-saving inverter technology High efficiency Standby function Excellent TIG ignition and welding properties HF start, non-contact prevents tungsten inclusions Ignition management and high open circuit voltage Concentrated, stable arc Powerful MMA welding Arcforce for excellent welding properties Hot start for safe ignition Antistick feature prevents electrode annealing Remote control connection as standard For welding current adjustment 100% suitable for construction sites Large mains voltage range for unlimited operation with generators and mains leads up to 75 m long Splash-water protected as per IP 23 Robust aluminium casing with impact-resistant plastic cover on front and rear Operating elements in protected location Safe and reliable Overvoltage protection: No damage to machine if inadvertently connected to 400 V mains voltage Temperature overload protection Dust-protected electronics Set Welding machine with ready-to-weld accessories Item no. TIG 180 DC DC TIG welding machine, portable, gas cooled, 5-pole torch trigger connection socket TW-TIG 17 GD 2T 4m TIG welding torch, 4 m reach, gas cooled, 2 torch triggers WK35qmm-4m/K 4 m workpiece lead DMR TN 200BAR/MIX 16L 200 bar pressure regulator with manometer, 16 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2 m 2 m gas hose Ready-to-weld set price Accessories EH 35qmm 4m BWG UNI Electrode holder with 4 m connection cable Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l RT1 19POL Remote control, welding current RA5 19POL 5m RA5 19POL 10m TR 70S G3 5 kg/package 2.0x1000 mm 5 m connection cable for remote control 10 m connection cable for remote control TIG welding rods 2.0 x 1000 mm, unalloyed

25 Control advantages Very easy one-knob operation just switch on and start welding Fast to learn ideal for assembly work with frequent personnel changes Setting and display Welding current Welding voltage Hold function Selection of welding procedures, operating modes TIG (HF start and lift arc) MMA Non-latched, latched Large rotary knob for safe operation, even with gloves Self-explanatory operating panel The most important TIG functions, such as welding current, down-slope and gas post-flow, are directly accessible Additional TIG and MMA welding parameters can be changed in the submenu. Large push-buttons for selection of functions such as non-latched, latched, MMA etc. Technical data Areas of application TIG 180 DC Setting range for welding current 5 A 180 A TIG MMA Duty cycle at ambient temperature 40 C 40 C 35% DC 180 A 150 A 60% DC 150 A 120 A 100% DC 120 A 100 A cosφ 0.99 Efficiency 86% Open circuit voltage 90 V Mains fuse (slow-blow) 1 x 16 A Mains voltage (tolerances) 1 x 230 V (-40% to +15%) Max. connected load 4.4 kva Rec. generator rating 7.5 kva Dimensions L x W x H [mm] 475 x 135 x 250 Weight, approx. 6.9 kg Protection classification IP 23 Insulation class H IEC ; -3; -10/ Standards CE/S-Safety sign/emc Class A n Production and repair work in workshops and for assembly work n Food and chemical industries; pipe, container and equipment construction n Vehicle, machine, plant and tool construction n Metal, conservatory and window construction n Façade, heating and ventilation construction Materials n Steel n CrNi n Copper Tungsten electrodes n 1.6, 2.4 and 3.2 mm dia. 25

26 AC/DC TIG welding machines Up to 180 A Inverters TIG 180 AC/DC The lightweight AC/DC TIG welding machine ideal for aluminium welding Only 16.5 kg easy to transport to any operating site Practical carrying strap for effortless transport on ladders, in steel construction and on scaffolds Energy cost-saving inverter technology High efficiency Standby function 100% suitable for construction sites Large mains voltage range for unlimited operation with generators and mains leads up to 75 m long Splash-water protected as per IP 23 Robust aluminium casing with impact-resistant plastic cover on front and rear Operating elements in protected location Excellent TIG ignition and welding properties HF start, non-contact prevents tungsten inclusions Concentrated, stable arc Safe and reliable Powerful MMA welding Perfect aluminium welding Optimum ignition and stabilisation of the alternating current arc thanks to positive terminal ignition for optimum tungsten balling Very good cleaning effect Remote control connection as standard For welding current adjustment Overvoltage protection: No damage to machine if inadvertently connected to 400 V mains voltage Temperature overload protection Dust-protected electronics Set Welding machine with ready-to-weld accessories Item no. TIG 180 AC/DC AC/DC TIG welding machine, portable, gas cooled, 5-pole torch trigger connection socket TW-TIG 17 GD 2T 4m TIG welding torch, 4 m reach, gas cooled, torch triggers WK35qmm-4m/K 4 m workpiece lead DMR TN 200BAR/MIX 16L 200 bar pressure regulator with manometer, 16 l/min, W21, 8x1/14" RH; G1/4" GH 2x1/4" 2 m 2 m gas hose Ready-to-weld set price Accessories EH 35qmm 4m BWG UNI Electrode holder with 4 m connection cable Transport cart for welding machine and 200 bar shielding gas cylinder up to 20 l RT1 19POL Remote control, welding current RA5 19POL 5m RA5 19POL 10m TR5183Mg4.5Mn 2.5 kg/ package 2.0x1000 mm 5 m connection cable for remote control 10 m connection cable for remote control TIG welding rods 2.0 x 1000 mm, aluminium

27 Control advantages Very easy one-knob operation just switch on and start welding Fast to learn ideal for assembly work with frequent personnel changes Setting and display Welding current Welding voltage Hold function Selection of the current type Alternating current (AC) Direct current (DC) Welding procedures, operating modes TIG (HF start and lift arc) MMA Non-latched, latched Large rotary knob for safe operation, even with gloves Alternating current (AC) functions pre-set for practical needs AC balance and frequency Ignition optimisation for optimum tungsten balling Self-explanatory operating panel The most important TIG functions, such as welding current, down-slope and gas post-flow, are directly accessible Additional TIG and MMA welding parameters can be changed in the submenu Large push-buttons for selection of functions such as non-latched, latched, MMA etc. Technical data Areas of application TIG 180 AC/DC Setting range for welding current 5 A 180 A TIG MMA Duty cycle at ambient temperature 40 C 40 C 35% DC 180 A - 50% DC A 60% DC 150 A 130 A 100% DC 120 A 110 A cosφ 0.99 Efficiency 88% Open circuit voltage 43 V Mains fuse (slow-blow) 1 x 16 A Mains voltage (tolerances) 1 x 230 V (-40% to +15%) Max. connected load 5.6 kva Rec. generator rating 8.1 kva Dimensions L x W x H [mm] 600 x 205 x 415 Weight, approx kg Protection classification IP 23 Insulation class F IEC ; -3; -10/ Standards CE/S-Safety sign/emc Class A n Production and repair work in workshops and for assembly work n Roofing operations n Food and chemical industries; pipe, container and equipment construction n Vehicle, machine, plant and tool construction n Metal, conservatory and window construction n Façade, heating and ventilation construction Materials n Aluminium n Steel n CrNi n Copper Tungsten electrodes n 1.6, 2.4 and 3.2 mm dia. 27

28 TIG welding machines Accessories and consumables TW-TIG 17 GD 2T 4M TIG welding torch, gas cooled mm mm 8 Gas cooled TIG welding torch with 2 push-buttons Decentralised torch connection: Welding current plug, G1/4" shielding gas connection, 5-pole torch trigger plug Hose package with 1 m of highly flexible leather protection on the torch handle Direct current duty cycle (DC negative pole) 140 A, 60% Alternating current duty cycle (AC) 125 A, 60% Equipment ex works: 2.4 mm dia. collet, l = 50 mm Collet body: mm dia. Long back cap Gas nozzle: 11 mm dia., l = 47 mm Description Type Item no. PU per unit TIG welding torch 4 m reach, gas cooled, 2 torch triggers TW-TIG 17 GD 2T 4m Gas nozzle, 47 mm long 1 Size 4, 6.5 mm dia. GN 17/18/26 47 mm, size Size 5, 8 mm dia. GN 17/18/26 47 mm, size Size 6, 9.5 mm dia. GN 17/18/26 47 mm, size Size 7, 11 mm dia. GN 17/18/26 47 mm, size Size 8, 12.5 mm dia. GN 17/18/26 47 mm, size Size 10, 16 mm dia. GN 17/18/26 47 mm, size Size 12, 19.5 mm dia. GN 17/18/26 47 mm, size Gas nozzle for gas lens, 42 mm long 2 Size 4, 6.5 mm dia. GN GLENS L42 size Size 5, 8 mm dia. GN GLENS L42 size Size 6, 9.5 mm dia. GN GLENS L42 size Size 7, 11 mm dia. GN GLENS L42 size Size 8, 12.5 mm dia. GN GLENS L42 size Size 11, 19.5 mm dia. GN GLENS L42 size Gas nozzle for Jumbo gas lens, 48 mm long 3 Size 6, 9.5 mm dia. GN LENS Jumbo L48 size Size 8, 12.5 mm dia. GN LENS Jumbo L48 size Size 10, 16 mm dia. GN LENS Jumbo L48 size Size 12, 19.5 mm dia. GN LENS Jumbo L48 size

29 TW-TIG 17 GD 2T 4M TIG welding torch, gas cooled Description Type Item no. PU per unit Gas nozzle for Mini gas lens, 20 mm long 4 Size 5, 8 mm dia. GN GLENS mini L20 size Size 6, 9.5 mm dia. GN GLENS mini L20 size Size 7, 11 mm dia. GN GLENS mini L20 size Collet body mm dia. COLB 17/18/ mm mm dia. COLB 17/18/ mm mm dia. COLB 17/18/ mm mm dia. COLB 17/18/ mm mm dia. COLB 17/18/ mm Collet body for gas lens mm dia. GLENS 17/18/26 1.0mm mm dia. GLENS 17/18/26 1.6mm mm dia. GLENS 17/18/26 2.4mm mm dia. GLENS 17/18/26 3.2mm mm dia. GLENS 17/18/26 4.0mm Collet body for Jumbo gas lens mm dia. GLENS Jumbo 17/18/ mm dia. GLENS Jumbo 17/18/ mm dia. GLENS Jumbo 17/18/ mm dia. GLENS Jumbo 17/18/ mm dia. GLENS Jumbo 17/18/ Collet body for Mini gas lens mm dia. GN mini 17/18/ mm dia. GN mini 17/18/ mm dia. GN mini 17/18/ mm dia. GN mini 17/18/ mm collet mm dia. COL 17/18/26 1.0mm, 50mm mm dia. COL 17/18/26 1.6mm, 50mm mm dia. COL 17/18/26 2.4mm, 50mm mm dia. COL 17/18/26 3.2mm, 50mm mm dia. COL 17/18/26 4.0mm, 50mm mm collet mm dia. COL 17/18/26 1.0mm, 30mm mm dia. COL 17/18/26 1.6mm, 30mm mm dia. COL 17/18/26 2.4mm, 30mm mm dia. COL 17/18/26 3.2mm, 30mm Insulator for gas lens INS 17/18/ Insulator for Jumbo gas lens INS 17/18/26 JUMBO Insulator, sealing ring for gas nozzle CTH GN PTFE Sealing ring for back cap CTH TIG PTFE O-ring for back cap, 8 x 2 mm Dia. 8 x 2 mm Back cap, short TCL S Back cap, long TCL L

30 i TEAMWELDER Product catalogue General information TEAMWELDER Top quality and certified safety The TEAMWELDER quality management process has been reviewed as part of a certification audit and complies with the latest EN ISO 9001:2008 standard. We observe this and other standards, regulations and laws. This is reflected in the reliability and durability of our products, which meet the high expectations of our customers. Standards and directives we comply with EMC Directive (2004/108/EC), Low Voltage Directive (2006/95/EC) IP23 S Protection class for increased protection e.g. when welding in the open air Welding under increased electrical risk e.g. in tanks IEC 60974, for arc welding systems EN ISO 9001: st Q

31 The TEAMWELDER online store fast, easy and convenient shopping Place your order conveniently and securely in our online store. Trade customers can log into the store with their login details, enabling access to their personal information and profile. We will ship your ordered goods within 14 days. A selection of different payment methods is available. All the latest offers and information about TEAMWELDER products and accessories are just a few clicks away at New customers operating a business must present both their trade licence and their VAT number. Consultancy + service Do you have any questions about TEAMWELDER products, accessories, your order or our services? We ll be happy to advise you or info@teamwelder.com Prices The prices quoted exclude VAT and any price increases or alloy surcharges. For postage and packaging charges and other additional costs, please refer to our delivery and payment conditions at 2-year warranty 2-Year Warranty TEAMWELDER combines the best quality with an attractive price in one welding machine. With over 20 years experience in arc welding technology, we supply reliable products that represent excellent value for money. In accordance with our warranty terms, we provide a two-year warranty for all of our welding machines, including those in three-shift operation. For detailed information please visit Returns Products can be returned free of charge within the warranty period by sending them to: TEAMWELDER Germany GmbH Sälzerstraße 20a D Ransbach-Baumbach Germany The 14-day cancellation period applies exclusively to products ordered from the online store. During the warranty period, we will generally ship a replacement machine within 48 hours (working days, Mon Fri) after the returned item has reached us. For more information on our return policies please visit T&Cs + technical data All products are supplied in accordance with TEAMWELDER Germany GmbH terms and conditions, which can be found at. The information in our documents is non-binding. We retain the right to make changes on the grounds of technical developments, spelling mistakes or errors. This catalogue is exclusively intended for industry, trade and the craft sector st Q 31

32 TEAMWELDER Product catalogue Ordering TEAMWELDER Online store Easy ordering... By Internet By fax Exclusively for industry, craft, trade and independent professions for use in commercial activities. Private customers may order only in the online store at Simply copy the adjacent form, enter your order and send! Got a question? info@teamwelder.com 32

33 Order form Trade Easy ordering by fax TEAMWELDER Germany GmbH Sälzerstraße 20a Ransbach-Baumbach Germany Customer No. (if known) New customer Date Your order number Ordered by: Mr/Ms First name Preferred delivery date Last name Customer Company Street name and number Post code, town/city Country Delivery address if different Company Street name and number Post code, town/city Country Tel. Fax VAT No. Seq. no. Item no. Item name Quantity/ Unit Unit price Total price Subtotal Company/Stamp Date/Signature plus VAT plus postage and packaging costs* *Orders for trade customers only in accordance with delivery and payment conditions at 33

34 Notes 34

35 35

36 MEMBER OF EWM GROUP Highest quality and ease of use for trade and industry TEAMWELDER Germany GmbH Sälzerstraße 20a Ransbach-Baumbach Germany Tel.: Fax: Visit us! The content of this document has been prepared and reviewed with all reasonable care. The information provided is subject to change; errors excepted. Sales Consultancy Service For more information visit WM TEAMWELDER