GOLDENISO/35 XTRAFLEX

Transcription

1 GOLDENISO/35 XTRAFLEX ISO C/D PART. REF. HOSE SIZE R.O.D. O.D. MAX W. BURST MIN.BEND WEIGHT STD MF2000 DN dash inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Ferrule Insert One Piece H * /8" 16,7 0,66 18,9 0, , ,36 M MF OPK-06 H * /2" 19,6 0,77 21,8 0, , ,44 M MF OPK-08 H * /4" 27,5 1,08 30,1 1, , ,82 M MF OPK-12 H * " 34,6 1,36 37,2 1, , ,21 M MF OPK-16 H * /4" 42,1 1,66 44,9 1, , ,57 M IP STD KEY PERFORMANCE Excellent flexibility (low bending force) also in low temperature applications - Approved 1 Million impulse cycles (MF2000 fittings) - Reduced bend radius - Easy mounting in severe installations - Isobaric pressure rating - BIO biological and mineral oils compatibility - No skive fitting solution available MAIN APPLICATIONS Heavy duty power lines with short assemblies in severe installations CONTINUOUS SERVICE TEMPERATURE RANGE -40 F / 250 F -40 C / 121 C RECOMMENDED FLUIDS Mineral oils, vegetable oils and synthetic ester based oils (up to 100 C/212 F), glycols and polyglycols, mineral oils in aqueous emulsion, water TUBE Oil resistant synthetic rubber REINFORCEMENT Four high tensile steel spirals (DN 6 31). Six high tensile steel spirals (DN 38 51). COVER Synthetic rubber with high abrasion, ozone, weather and heat resistance APPLICABLE SPECS ISO C/D, JIS K TYPE APPROVALS MSHA STANDARD PACKAGING Reel

2 GOLDENISO/35 XtraFlex Ferrule Type M M M M MULTIFIT MF /06/11 E.Donati E.Donati R.Tessieri

3 GOLDENISO/35 XtraFlex Ferrule Type M M M INTERLOCK PLUS MF /06/11 E.Donati E.Donati R.Tessieri

4 GOLDENISO/38 LONGLIFE HIGH FATIGUE RESISTANCE PART. REF. HOSE SIZE R.O.D. O.D. MAX W. BURST MIN.BEND WEIGHT STD MF2000 DN dash inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Ferrule Insert H * /4" 27,7 1,09 32,0 1, , ,95 M IP H * " 34,8 1,37 38,1 1, , ,34 M IP STD One Piece KEY PERFORMANCE Over standard pressure rating - Approved with two severe fatigue qualification programs: 2 millions flexing impulse cycles (ISO 6802, T=100 C, test pressure=120% WP) - 1,2 million flexing impulse cycles (ISO 8032, T=120 C, test pressure=133%) - Superior abrasion resistance - High ozone and weather resistance - Flame retardant and antistatic properties of the cover - Wide compatibility with hydraulic fluids, mineral and biodegradable oils - Low bend radius and high flexibility - New Interlock-Plus easy mounting system MAIN APPLICATIONS Heavy duty pressure lines, hydrostatic transmissions, heavy duty earth moving equipment, hydraulic presses, drilling applications, injection moulding machines, specific installations with severe abrasion conditions and/or heavy duty environmental conditions, marine applications, underground and open pit mining CONTINUOUS SERVICE TEMPERATURE RANGE -40 F / 250 F -40 C / 121 C MAX OPERATING TEMPERATURE 125 C, 257 F RECOMMENDED FLUIDS Mineral oils, vegetable oils and synthetic ester based oils, glycols and polyglycols, mineral oils in aqueous emulsion, water TUBE Oil resistant synthetic rubber REINFORCEMENT Four high tensile steel wire spirals COVER Synthetic rubber with high ozone, abrasion and weather resistance APPLICABLE SPECS Manuli special design exceeds SAE J517 type100r13; ISO 3862 R13; ISO C-D extension TYPE APPROVALS MSHA STANDARD PACKAGING Reel

5 GOLDENISO/38 LongLife Ferrule Type M M ( 0.5) mm ( 0.5) mm INTERLOCK PLUS MF Internal Bore Collapse, mm /06/11 E.Donati J.Giridhar R.Tessieri