Food Processing Vaportight

Size: px

Start display at page:

Download "Food Processing Vaportight"

Elijah Hampton
5 years ago
Views:

PROJECT DTE TYPE NOTES - High Lumen Packages, up to 0,00Lm Delivered - mbient operating temps as Low as -0C(-0F) and as High as +C(+F) (Temps Vary by Configuration.

5V Rated (will not melt or burn) - Polycarbonate Lens: Clear / Frosted - 0 Year warranty NSF IP65 IP66 IP67 OPTIONL IP69 NEM X 5V DISCLIMER: lthough KURTZON has prepared the information contained in

Whilst the information is considered to be true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information.

1 PROJECT DTE TYPE NOTES - High Lumen Packages, up to 0,00Lm Delivered - mbient operating temps as Low as -0C(-0F) and as High as +C(+F) (Temps Vary by Configuration. Verify in Energy Data Section) - NSF pproved - IP65 / IP66 / IP69 / (Optional IP67) PSI hosedown - UL 598 Wet Location - Marine grade 6 stainless steel latches & Mounting brackets - NemaX - UL 5V Rated (will not melt or burn) - Polycarbonate Lens: Clear / Frosted - 0 Year warranty NSF IP65 IP66 IP67 OPTIONL IP69 NEM X 5V DISCLIMER: lthough KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for the accuracy of any information printed and stored or in any way interpreted or used. ORDERING GUIDE Series Lumen Package CCT Lens Voltage Controls Mounting Sensors Options FP-SEG-50 -SERIES - LUMEN PCKGE - CCT - LENS 6 - CONTROLS 8 - SENSORS (Not Required) FP-SEG-50 LO: Rows of Low Flux LED's 8 CRI: CP: Clear Polycarbonate DIM: 0-0V % OCC MW: Microwave Occ Sensor (Internal ' MX) LO: Rows of Low Flux LED's 80 = 000K CCT FP: Frost Polycarbonate DIM5: 0-0V 5% OCC H: Highbay Occ Sensor (End Mount 0'-0') LO: Rows of Low Flux LED's 85 = 500K CCT C: Clear crylic DLI: DLI % OCC L: Lowbay Occ Sensor (End Mount 8'-0') 6LO: 6 Rows of Low Flux LED's 80 = 000K CCT F: Frost crylic /ED: Circuits DL/OCC H: Daylight & Highbay Occ Sensor (End Mount 0' MX) HI: Rows of High Flux LED's 850 = 5000K CCT LUTRON: (Specify Type) DL/OCC L: Daylight & Lowbay Occ Sensor (End Mount 8' MX) HI: Rows of High Flux LED's 5 - VOLTGE OTHER: (Must Specify) OTHERS: Must Specify + CRI: UNV: (0-77 Vac) 95 = 500K CCT HV: (7-80 Vac) 7 - MOUNTING (Not Required) 9 - OPTIONS (Not Required) 90 = 000K CCT V-Hook: Mounting Hooks PXW: Program to Specified Wattage (Replace X with Watts) Not available in "HI" lumen package RM: Rigid Mtg eam SM: Surface Mtg racket FM: Flex Mtg racket SCM: Single Conduit Stem PXL: Program to Specified Lumens (Replace X with Lumens) 0kV: 0kV Surge Protection (one per specified circuit) WC: Wire Cord With Plug (Must Provide Specs) WHIP: Flex Whip Installed (Must Provide Specs) EM0: 0W Integral Emergency Driver (Specify Voltage & Switching) FF: Fuse & Fuse Holder (One per Specified Circuit) IP67: Optional IP67 Rating

SPECIFICTIONS HOUSING: Injection molded,.5 thick Hole Free White Fiberglass body with sloped top Surface to prevent water accumulation.

REFLECTOR: Standard (9%) High Reflectance white gauge metal. Formed wiring cover for rigidity. Removable without tools or screws.

MOUNTING: Provided with () mounting brackets for suspending (cables by others). See mounting options for other configurations.

Highly efficient and consistent color maintained to SDMC for color critical applications. 50/L70 and compliant with Zhaga recognized hole patterns.

They come with at least.5kv surge protection, have less than 0% THD at max load, allast Factor Greater than.

Drivers with higher input voltage ratings are available, consult factory for driver specifications.

2 SPECIFICTIONS HOUSING: Injection molded,.5 thick Hole Free White Fiberglass body with sloped top Surface to prevent water accumulation. 5V Flame Rating LENS: Injection molded Heavy gauge Clear or Frosted crylic or Polycarbonate. Secured by Captive Stainless Steel cables. REFLECTOR: Standard (9%) High Reflectance white gauge metal. Formed wiring cover for rigidity. Removable without tools or screws. GSKETS: One piece urethane extruded foam with smooth surface. LTCHES: Ten (0) 6 Stainless Steel over-center latches secure lens to housing. MOUNTING: Provided with () mounting brackets for suspending (cables by others). See mounting options for other configurations. LEDS: Commercially available in a wide variety of Color Temperature (CCT), FLUX, and CRI. Highly efficient and consistent color maintained to SDMC for color critical applications. 50/L70 and compliant with Zhaga recognized hole patterns. Consult factory for LED options or configurations not listed below. DRIVERS: Standard Universal Voltage Class drivers are 0-0v Dimmable to % for most LED configurations. They come with at least.5kv surge protection, have less than 0% THD at max load, allast Factor Greater than.95 and are programmable to match specific lumen or wattage requirements. Drivers with higher input voltage ratings are available, consult factory for driver specifications. INSTLLTION: Two sealed / inch trade size conduit entry points located at each end. See options for pre-wired whips or cords. LISTINGS: NSF Listed for food zones. IP69 rated for dust and water ingress. Optionally rated to IP67. Suitable for 500 PSI high pressure hosedowns. UL listed per UL_598 for wet locations. Nema x rated. Drivers and LEDs are covered by a 5 year warranty, the remaining fixture is covered by a 0 year warranty. PRODUCT DRWINGS 6.8" SEG 50 REFERENCE DIMENSIONS SLOPED CK HOUSING 5.9".6" LENS OPTIONS: CLER CRYLIC FROSTED CRYLIC CLER POLYCRONTE FROSTED POLYCRONTE (0) SS LTCHES WITH INTEGRTED TMPERPROOF FSTENING OPTION --L-SEG 50 DWG DTE: //07

3 ENERGY DT ENCLOSURE SIZE LED PCKGE CRI DIMMING SELECTION LUMENS¹ STD SEG 50 (PROX¹ DELIVERED LUMENS) CLER LENS FROST LENS MIENT TEMP WTTS² EFFICCY³ (Lm/W) LUMENS¹ WTTS² EFFICCY³ (Lm/W) MINIMUM MXIMUM⁴ 50 LO 8 0-0V %,5 8 7, C (- F) 0 C (0 F) 50 LO 8 0-0V 5%,5 8 7, C (- F) 0 C (0 F) 50 LO + 0-0V %,0 8, C (- F) 0 C (0 F) 50 LO + 0-0V 5%,0 8, C (- F) 0 C (0 F) 50 LO 8 0-0V % 5,0 0, C (- F) 0 C (0 F) 50 LO 8 0-0V 5% 5,0 0, C (- F) 0 C (0 F) 50 LO + 0-0V %, , C (- F) 0 C (0 F) 50 LO + 0-0V 5%, , C (- F) 0 C (0 F) 50 LO 8 0-0V % 7,0 5 6, C (- F) 0 C (0 F) 50 LO 8 0-0V 5% 7,0 5 6, C (- F) 0 C (0 F) 50 LO + 0-0V % 6, , C (- F) 0 C (0 F) 50 LO + 0-0V 5% 6, , C (- F) 0 C (0 F) 50 6 LO 8 0-0V %, , C (- F) 0 C (0 F) 50 6 LO 8 0-0V 5%, , C (- F) 0 C (0 F) 50 6 LO + 0-0V % 9,67 8 8, C (- F) 0 C (0 F) 50 6 LO + 0-0V 5% 9,67 8 8, C (- F) 0 C (0 F) 50 HI 8 0-0V % 9, , C (- F) 5 C (95 F) 50 HI 8 0-0V 5% 0, , C (-0 F) C ( F) 50 HI 8 0-0V % 8, , C (- F) 5 C (95 F) 50 HI 8 0-0V 5% 0,0 5 7, C (-0 F) 0 C (0 F) 50 EM0⁵ N N 00- N N 0 C ( F) 5 C (95 F) ¹ DELIVERED LUMEN DT IS EXTRPOLTED FROM MESURED WITH NO EXTR OPTIONS. VRINCES WILL OCCUR WHEN OPTIONS RE CHOSEN ² WTTGE IS MESURED WITH 000K 0vC ND Tambient = 5C. WTTGES MY VRY WITH LTERNTE CONFIGURTIONS ³ EFFICCY CLCULTED USING 000K CCT DT. ⁴ TEMP RTING MY VRY WITH SPECIFIED DRIVERS OR NY NON STNDRD SELECTION ⁵ MINUTE 0W EMERGENCY DRIVER; LUMENS CLCULTED SED ON FIXTURE EFFICCY. (EX: 0W x 00Lm/W = 000Lm Delivered) PHOTOMETRICS FP-SEG-50-6LO90-CP-UNV-DIM FP-SEG-50-HI80-CP-UNV-DIM5 Report No: Report No: Total Lumens: 9,67 Total Lumens: 0,0 Wattage: 8. Wattage: 50.9 Efficacy:.8 (Lumens Per Watt) 0 Efficacy:. (Lumens Per Watt) 0 Fixture Size: 5 x 500 Fixture Size: 5 x Deg. 70 Deg. 0 Deg. D eg. 80 Deg. 70 Deg. 0 Deg. Deg.