THE SMART EXTRUSION- AND FASTENING TECHNOLOGY

Transcription

1 54 THE SMART EXTRUSION- AND FASTENING TECHNOLOGY

2 55 The key elements of the Modular Automation System are the unique Extrusion and Fastening Technologies. Extrusions, available in mm and mm size systems, are fully compatible due to a common mm slot size. In combination with a strong Fastening Technology, the system is unique in its stability and rigidity as well as in its enormous potential for time savings - from design to assembly. One slot size fits all 13 profile shapes in mm and mm extrusion sizes simplify the application large, uniform mm wide and mm deep T-slot same T-slot dimensions for all extrusions in the Modular Automation System Post insertion of heavy duty Drop-in Nuts up to M8 possible Maximum stability worldwide unique play-free, accurate and centrally aligned connections single fastener provides up to 4 tons of tensile strength tubular honeycomb structure for outstanding torsion and load resistance maximum stability for all your applications One fastener, double value two-sided fastener provides equal strength on both sides of the connection twice the strength for the price of one no additional connectors needed strength comparable to a welded connection Any hole drilled is one hole too many all connections made without drilling or milling maximum wall thickness in key areas unlimited re-usability for required hole an integrated location groove guarantees precise and straight drilling Stability increases with every turn every turn positions centering inserts tighter into the T-slot absolutely play-free, accurate and centrally aligned connection concave surface of extrusion guarantees durable vibration resistance low fastener height saves space in your design Inserting the drop-in nut Simple and quick insertion of the drop-in nut into the mm wide T-slot leaf spring assembly protects drop-in nut against unintended movement, guaranteed contact surface to position the the drop-in nut, just slide to stop position Anything is possible - even post assembly simple post-assembly integration of struts without dismantling the frame easy repositioning of struts at any time no cutting of existing structures no surface treatment required Save time, cut cost minimum assembly time required simple and quick selection of Extrusion and Fastening Technology no measuring of boreholes and no drawings necessary length of the extrusion is the only measurement needed labeled and tapped extrusions allow immediate assembly

3 56 The Smart Extrusion Technology Extrusion, mm Series Page 58 Extrusion 16x PIL 16 Extrusion x PIL Extrusion x80 PIL 80 Extrusion 80x80 PIL 8080 P. 58 P. 58 P. 59 P. 59 Lean Line Extrusion x PIL Lean Line Extrusion x80 PIL 4180 P. 60 P. 61 Extrusion, mm Series Page 62 Extrusion x PIL Extrusion x100 PIL 10 Extrusion x200 PIL 20 P. 62 P. 62 P. 63 Extrusion 100x100 PIL 1010 Extrusion 100x200 PIL 1020 P. 64 P. 64 Extrusion 25x200 PIL 2520 P. 65

4 57 The Strong Fastening Technology Fastening Technology mm Series Page 66 Fastener 16x FAS 1641 Fastener x FAS 4_ Fastener x80 FAS 8_ Surface Fastener x FAS 49 End-to-End Fastener x FAS 51 P. 66 P. 66 P. 67 P. 68 P. 68 Elbow Joint GUS 4_41 P. 69 Fastening Technology mm Series Page 70 Fastener x FAS 5_ Surface Fastener x FAS 5_ End-to-End Fastener x FAS 61 Fastener 100x200 FAS 102_ P. 70 P. 72 P. 73 P. 74 Fastening Technology mm and mm Series Page 75 Bracket GUS 4_ Fixing Bracket 35x25 GUS 4651 Bracket 100 GUS 100_ Corner Bracket 100, one side centered GUS 110_ Drop-In Nut TIN 45 P. 75 P. 76 P. 77 P. 77 P. 78 Inserter TIN 9990 T-Nut TIN 60 T-Nut Bar TIN _000 T-Nut In-Line Fastener TIN 0171 Miter Fastener TIN 4545 P. 78 P. 79 P. 80 P. 80 P. 81 Special Fastener TIN _000 P. 81

5 58 PIL 16 Extrusion 16x Signs, shelves, racks Hand rails, guide rails MRO equipment etc. 1.25x Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : 2.9 cm 3 Section modulus W y : 1.0 cm 3 Geometrical moment of inertia: against x I x : 5.8 cm 4 against y l y : 0.8 cm 4 against torsion I t : 0.6 cm 4 Cross sectional area A: mm Ø Description Length Weight/Meter Extrusion, cut to length, M6 tapped on both ends, 15 mm deep PIL 16 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm) PIL 16 NNN kg PIL Extrusion x Machine guardings Enclosures Safety fence panels & doors Light weight machine frames Shelves, racks, trolleys (MRO equipment) etc. 1.25x45 Ø Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x = W y : 4.3 cm 3 Geometrical moment of inertia: against x + y I x = l y : 8.6 cm 4 against torsion I t : 0.7 cm 4 Cross sectional area A: mm Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, mm deep PIL SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil NNN kg Extrusions, 80 units, stock length 60 mm (usable length 6000 mm) PIL PAC kg 1) Please complete the order code by adding the desired length.

6 59 PIL 80 Extrusion x80 Machine guardings Enclosures Safety fence panels & doors Machine frames Workstations Shelves, racks, trolleys (MRO equipment) etc. 1.25x45 Ø Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : 15.4 cm 3 Section modulus W y : 8.4 cm 3 Geometrical moment of inertia: against x I x : 61.6 cm 4 against y l y : 16.8 cm 4 against torsion I t : 9.3 cm 4 Cross sectional area A: mm ± Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, mm deep PIL 80 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 80 NNN kg Extrusions, units, stock length 60 mm (usable length 6000 mm) PIL 80 PAC kg PIL 8080 Extrusion 80x80 Tolerances and Deflection see pages 184 to 185 Machine frames Workstations Machine guardings Enclosures Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x = W y : 28.0 cm 3 Geometrical moment of inertia: against x + y I x = l y : cm 4 against torsion I t : 59.5 cm 4 Cross sectional area A: mm x Ø7 Ø 43 ±1 1 Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, mm deep PIL 8080 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 8080 NNN kg Extrusions, 25 units, stock length 60 mm (usable length 6000 mm) PIL 8080 PAC kg 1) Please complete the order code by adding the desired length.

7 60 PIL Lean Line Extrusion x Machine guardings Enclosures Safety fence panels Light weight machine frames Workstations Shelves, racks, trolleys (MRO equipment) etc. 1.25x45 Ø Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x = W y : 3.3 cm 3 Geometrical moment of inertia: against x + y I x = l y : 6.5 cm 4 against torsion I t : 0.6 cm 4 Cross sectional area A: mm Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, mm deep PIL SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm) PIL NNN kg Extrusions, 80 units, stock length 60 mm (usable length 6000 mm) PIL PAC kg 1) Please complete the order code by adding the desired length.

8 61 PIL 4180 Lean Line Extrusion x80 Machine guardings Enclosures Safety fence panels Light weight machine frames Workstations Shelves, racks, trolleys (MRO equipment) etc. 1.25x45 Ø Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : 11.9 cm 3 Section modulus W y : 6.4 cm 3 Geometrical moment of inertia: against x I x : 47.4 cm 4 against y l y : 12.8 cm 4 against torsion I t : 5.9 cm 4 Cross sectional area A: mm ±1 1 Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, mm deep PIL 4180 SNN 2.0 kg Extrusion, stock length: 60 mm (usable length 6000 mm) PIL 4180 NNN kg Extrusions, units, stock length 60 mm (usable length 6000 mm) PIL 4180 PAC kg 1) Please complete the order code by adding the desired length.

9 62 PIL Extrusion x Machine frames Robot frame structures Workstations Machine guardings Enclosures Shelves, racks, trolleys (MRO equipment) etc. 1.5x45 Ø Tolerances and Deflection see pages 184 to 185 Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x = W y : 8.0 cm 3 Geometrical moment of inertia: against x + y I x = l y : 20.0 cm 4 against torsion I t : 4.8 cm 4 Cross sectional area A: mm Description Length Weight/Meter Extrusion, cut to length, M10 tapped on both ends, mm deep PIL SNN 2.3 kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil NNN kg Extrusions, 64 units, stock length 60 mm (usable length 6000 mm) PIL PAC kg PIL 10 Extrusion x100 Tolerances and Deflection see pages 184 to 185 Machine frames Robot frame structures Workstations Base support for Linear Motion Units & gantries Machine guardings Enclosures Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : 29.7 cm 3 Section modulus W y : 16.6 cm 3 Geometrical moment of inertia: against x I x : 8.5 cm 4 against y l y : 41.4 cm 4 against torsion I t : 37.0 cm 4 Cross sectional area A: mm x45 Ø ±1 1 Description Length Weight/Meter Extrusion, cut to length, M10 tapped on both ends, mm deep PIL 10 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 10 NNN kg Extrusions, 32 units, stock length 60 mm (usable length 6000 mm) PIL 10 PAC kg 1) Please complete the order code by adding the desired length.

10 63 PIL 20 Extrusion x200 Tolerances and Deflection see pages 184 to 185 Heavy duty machine frames Robot frame structures Workstations Base support for Linear Motion Units & gantries Machine guardings Enclosures Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : cm 3 Section modulus W y : 33.6 cm 3 Geometrical moment of inertia: against x I x : cm 4 against y l y : 84.1 cm 4 against torsion I t : cm 4 Cross sectional area A: mm 2 1.5x45 Ø ± Description Length Weight/Meter Extrusion, cut to length, M10 tapped on both ends, mm deep PIL 20 SNN 8.1 kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 20 NNN kg Extrusions, 16 units, stock length 60 mm (usable length 6000 mm) PIL 20 PAC kg 1) Please complete the order code by adding the desired length.

11 64 PIL 1010 Extrusion 100x100 Tolerances and Deflection see pages 184 to 185 Heavy duty machine frames Robot frame structures Workstations Base support for Linear Motion Units & gantries Machine guardings Enclosures Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x = W y : 61.1 cm 3 Geometrical moment of inertia: against x + y I x = l y : cm 4 against torsion I t : cm 4 Cross sectional area A: 27.4 mm x Ø 8.8 Ø 56 ±1 1 Description Length Weight/Meter Extrusion, cut to length, M10 tapped on both ends, mm deep PIL 1010 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 1010 NNN kg Extrusions, 16 units, stock length 60 mm (usable length 6000 mm) PIL 1010 PAC kg PIL 1020 Extrusion 100x200 Tolerances and Deflection see pages 184 to 185 Heavy duty machine frames Robot frame structures Workstations Base support for Linear Motion Units & gantries Machine guardings Machine enclosures Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : cm 3 Section modulus W y : cm 3 Geometrical moment of inertia: against x I x : cm 4 against y l y : cm 4 against torsion I t : cm 4 Cross sectional area A: mm 2 1.5x Ø 8.6 Ø 53.5 ±1 Ø 47 ±1 1 Description Length Weight/Meter Extrusion, cut to length, M10 tapped on both ends, mm deep PIL 1020 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 1020 NNN kg Extrusions, 8 units, stock length 60 mm (usable length 6000 mm) PIL 1020 PAC kg 1) Please complete the order code by adding the desired length.

12 65 PIL 2520 Extrusion 25x200 Tolerances and Deflection see pages 184 to 185 Carriage plates for Linear Motion Units Workstations Shelves, racks, trolleys (MRO equipment) etc. Material: EN AW-6063-T66 clear anodized aluminum Section modulus W x : cm 3 Section modulus W y :.1 cm 3 Geometrical moment of inertia: against x I x : cm 4 against y l y : 17.6 cm 4 against torsion I t : 9.8 cm 4 Cross sectional area A: mm x Ø Description Length Weight/Meter Extrusion, cut to length, M8 tapped on both ends, 15 mm deep PIL 2520 SNN kg Extrusion, stock length: 60 mm (usable length 6000 mm)pil 2520 NNN kg 1) Please complete the order code by adding the desired length.

13 66 FAS 1641 Fastener 16x IBS M06x fastener for extrusion PIL 16.2 Ø 6.6 Ø 11 FAS 16 Material: clear anodized aluminum, galvanized steel IBS M06x018 IBS M06x018 = 10 Nm Ø Ø TIN Description FAS 16 TIN 46 IBS M06x018 Weight Fastener Kit, 16x 1 1 3FAS kg FAS 4_ Fastener x IBS M06x fastener on mm series for extrusion PIL and PIL 80 transverse Ø FAS TIN 46/ TIN 4596 LKS M08x025 Material: galvanized GD-Zn, galvanized steel Load index See page 186 IBS M06x018 = 10 Nm LKS M08x025 = 12 Nm Ø Ø 6.3 Transfer resistance per conductive connection: 0.4 mω Optional x fastener Kit for conductive structures 1 unit FAS 41 or FAS 43 conductive 80 2 units FAS 41 or FAS 43 conductive 1 unit FAS 41 or FAS 43 conductive Description FAS TIN 46 TIN 4596 IBS M06x018 LKS M08x025 Weight Fastener Kit, x FAS kg Fastener Kit, x FAS 41CP kg Fastener Kit, x, conductive FAS kg Fastener Kit, x, conductive FAS 43CP kg

14 67 FAS 8_ Fastener x80 IBS M06x fastener on mm series for extrusion PIL 80, longitudinal PIL 8080 Ø FAS 80 Material: galvanized GD-Zn, galvanized steel Load index See page Ø Ø 6.3 TIN 46/ TIN 4596 LKS M08x025 IBS M06x018 = 10 Nm LKS M08x025 = 12 Nm Transfer resistance per conductive connection: 0.4 mω Optional x80 fastener Kit for conductive structures 1 unit FAS 81 or FAS 83 conductive 80 2 units FAS 81 or FAS 83 conductive 1 unit FAS 81 or FAS 83 conductive Description FAS 80 TIN 46 TIN 4596 IBS M06x018 LKS M08x025 Weight Fastener Kit, x FAS kg Fastener Kit, x FAS 81CP kg Fastener Kit, x80, conductive FAS kg Fastener Kit, x80, conductive FAS 83CP kg 1) Packaged in Kit 2) Packaged by type, available for an order quantity of 100 or more

15 68 FAS 49 Surface Fastener x Used for connections to non-robotunits surfaces on mm series for extrusion PIL 15 Ø 4.1 Ø FAS 48 7 Material: clear anodized aluminum, galvanized steel 5 Ø Ø 6.2 SKS M08x030 = 15 Nm 6.5 Ø 8.2 Ø x 45 SKS M08x M6 27 e.g. for attaching to steel plates Description FAS 48 SKS M08x030 Weight Surface Fastener Kit, x 1 1 FAS kg FAS 51 End-to-End Fastener x FAS Used for end-to-end connections of mm series for extrusion PIL Ø 10.7 Ø 6.2 Ø Material: clear anodized aluminum, galvanized steel SKS M08x030 PKS 004x012 SKS M08x030 = 15 Nm IBS M06x025 = 10 Nm 5 SKM M006 Ø 8.2 Ø x45 FAS 48 IBS M06x Drive in grooved pin Press in nut Description FAS 48 FAS SKS M08x030 IBS M06x025 PKS 004x012 Weight End-to-End Fastener Kit, x FAS kg

16 69 GUS 4_41 Elbow Joint TIN 48 IBS M08x016NIKO For variable angle connections, e.g.: Guardings Frames Swing arms x45 Material: zinc diecast or galvanized steel Pivoting range: +/- 90 R17 TIN 48 GUS IBS M08x016NIKO = 20 Nm Clamp screw = 8 Nm 30 SW13.2 Ø 8.5 TIN 48 IBS M08x016NIKO Nm 3000 N GUS 7 Nm 3000 N TIN 48 Description GUS GUS TIN 48 IBS M08x016NIKO Weight Elbow Joint Kit 1-2 2GUS kg Elbow Joint Kit with Clamping Lever GUS kg

17 70 FAS 5_ Fastener x IBS M08x020 FAS Used for 90 connections of heavy-duty structures in the mm series for extrusions: PIL PIL 10 PIL Ø 10.5 Ø.2 7 Material: GD-Zn black KTL coated, galvanized steel x 45 SKS M10x035 FAS 52 Load index See page 186 Ø8.2 IBS M08x020 = 26 Nm SKS M10x035 = Nm TIN 48 / TIN 4598 Transfer resistance per conductive connection: 0.4 mω Assembly units FAS 51 or FAS 53 conductive 2 units FAS 51 or FAS 53 conductive 4 units FAS 51 or FAS 53 conductive Description FAS FAS 52 TIN 48 TIN 4598 IBS M08x020 SKS M10x035 Weight Fastener Kit, x FAS kg Fastener Kit, x FAS 51CP kg Fastener Kit, x, conductive FAS kg Fastener Kit, x, conductive FAS 53CP kg Fastener, x FAS PAC kg 1) Packaged in Kit 2) Packaged by type, available for an order quantity of 100 or more

18 71 FAS 5_ Single-Sided Fastener x IBS M08x020 FAS Used for 90 connections of heavy-duty structures in the mm series for extrusions: PIL 10 PIL 1010 PIL Ø 10.5 Ø Material: GD-Zn black KTL coated, galvanized steel x 45 SKS M10x035 FAS 52 Load index See page 186 TIN 48 / TIN 4598 IBS M08x020 = 26 Nm SKS M10x035 = Nm Transfer resistance per conductive connection: 0.4 mω unit FAS 55 singlesided or FAS 57 singlesided, conductive Ø Assembly 2 units FAS 59 2 units FAS 55 single-sided or FAS 57 single-sided, conductive 4 units FAS 55 single-sided or FAS 57 single-sided, conductive 1 unit FAS 55 single-sided or FAS 57 single-sided, conductive Description FAS FAS 52 TIN 48 TIN 4598 IBS M08x020 SKS M10x035 Weight Fastener Kit, x, single-sided FAS kg Fastener Kit, x, single-sided FAS 55CP kg Fastener Kit, x, single-sided, cond FAS kg Fastener Kit, x, single-sided, cond FAS 57CP kg Fastener, x FAS PAC kg 1) Packaged in Kit 2) Packaged by type, available for an order quantity of 100 or more

19 72 FAS 59 Surface Fastener x FAS Used for connections to non-robotunits surfaces. 90 connection for massive structures in the mm series for extrusions PIL PIL 10 PIL 1010 PIL Ø 10.5 Ø x 45 SKS M10x035 Material: GD-Zn black KTL coated, galvanized steel SKS M10x035 = Nm 15 Ø8.2 M8 34 e.g. for attaching to steel plates Description FAS SKS M10x035 Weight Surface Fastener Kit, x 1 1FAS kg

20 73 FAS 61 End-To-End Fastener x FAS 60 Integrated thread Used for end-to-end connections of mm series extrusions for PIL PIL 10 PIL 1010 PIL Ø 10.5 Ø IBS M08x025 Material: GD-Zn black KTL coated, galvanized steel x 45 FAS IBS M08x020 = 26 Nm SKS M10x035 = Nm Ø8.2 SKS M10x035 Description FAS FAS 60 IBS M08x025 SKS M10x035 Weight End-To-End Fastener Kit, x FAS kg

21 74 FAS 102_ Fastener 100x200 IBS M08x020 Used for 90 connections of heavy duty structures of PIL 1020 Material: black anodized aluminum, galvanized steel Ø Ø Ø 8.2 Ø.1 7 Ø FAS 1020 TIN 48/ TIN 4598 IBS M08x020 = 26 Nm SKS M10x035 = Nm SKS M10x035 Transfer resistance per conductive connection: 0.4 mω x45 Cross Fastener In-Line Fastener units FAS 1021 or FAS 1023 conductive 1 units FAS 1025 or FAS 1027 conductive Description FAS 1020 TIN 48 TIN 4598 IBS M08x020 SKS M10x035 Weight Cross Fastener Kit, 100x FAS kg Cross Fastener Kit, 100x200, cond FAS kg In-Line Fastener Kit, 100x FAS kg In-Line Fastener Kit, 100x200, cond FAS kg

22 75 GUS 4_ Corner Bracket / IBS M08x020NIKO BLS M008 Used for 90 connections and as strengthening element in combination with Robotunits fasteners, for both mm and mm series extrusions, e.g.: / series combination / series combination / series combination GUS 42 GUS 40 TIN 48 Connections to non-robotunits extrusions and surfaces, e.g.: Mounting of table tops Fastening to non-robotunits extrusions Fastening to walls 37 Material: GD-Zn black KTL coated, galvanized steel A 800 N IBS M08x020NIKO = 20 Nm By turning the centering insert (GUS 42), the angle bracket can be used in either the mm or the mm series..2 A 3.3 A in mm series = 20 A in mm series = 25 s Description GUS 40 GUS 42 TIN 48 IBS M08x020NIKO BLS M008 Weight Corner Bracket / Kit GUS kg Corner Bracket / Kit GUS 41CP kg Corner Bracket / GUS 40 PAC kg 1) Packaged in Kit 2) Packaged by type, available for an order quantity of 100 or more

23 76 GUS 4651 Fixing Bracket 35x25 SKS M06x020 GUS 46 BLS M006SKS TIN 46 Used for 90 connections and as strengthening element in combination with Robotunits extrusion technology with non-robotunits components. Particularly suitable for fixing table plates and similar surface elements Material: clear anodized aluminum galvanized steel Ø 6.3 SKS M06x020 = 9 Nm s Table plate fastening Surface element fastening Description GUS 46 TIN 46 SKS M06x020 BLS M006SKS Weight Fixing Bracket, 35x25 Kit GUS kg

24 77 GUS 100_ Corner Bracket 100 GUS 1000 IBS M08x020 Used for 90 connections and as strengthening element in combination with Robotunits fasteners. The GUS 1000 can also be used with mm series extrusions parallel to T-slot centerline Ø 9 Material: GD-Zn black KTL coated, galvanized steel TIN 48 IBS M08x020 = 26 Nm N Description GUS 1000 TIN 48 IBS M08x020 Weight Corner Bracket 100 Kit 1 4 4GUS kg Corner Bracket 100 Kit 1 4 4GUS 1001CP kg Corner Bracket GUS 1000 PAC kg GUS 110_ Corner Bracket 100, one side centered GUS 1100 IBS M08x020 Used for 90 connections and as strengthening element in combination with Robotunits fasteners and non-robotunits extrusions and surfaces. The GUS 1100 can also be used with mm series extrusions parallel to T-slot centerline Ø 9 Material: GD-Zn black KTL coated, galvanized steel TIN 48 IBS M08x020 = 26 Nm 1600 N Description GUS 1100 TIN 48 IBS M08x020 Weight Corner Bracket 100 Kit, one side centered 1 4 4GUS kg Corner Bracket 100 Kit, one side centered 1 4 4GUS 1101CP kg Corner Bracket 100, one side centered GUS 1100 PAC kg

25 78 TIN 45 Drop-in Nut Used for mm and mm series extrusions Self-centering Slip protection (leaf springs) Anti-twist safeguard Material: galvanized steel 22.5 M F Description F 1 Weight Drop-in Nut M4 10 N TIN kg Drop-in Nut M4, conductive 10 N TIN kg Drop-in Nut M N TIN kg Drop-in Nut M5, conductive 3000 N TIN kg Drop-in Nut M6 40 N TIN kg Drop-in Nut M6, conductive 40 N TIN kg Drop-in Nut M N TIN kg Drop-in Nut M8, conductive 6000 N TIN kg TIN 9990 Inserter Assembly tool for inserting Drop-in Nuts into T-slot. Material: galvanized steel Description Weight Inserter TIN kg 1) Pull-out values are based on screw quality 8.8

26 79 TIN 60 T-Nut For mm series and mm series extrusions Self-centering Material: galvanized steel F 25 M Description F 1 Weight T-Nut M8 70 N TIN kg T-Nut M10 70 N TIN kg 1) Pull-out values are based on screw quality 8.8

27 85 80 TIN _000 T-Nut Bar Used for specific applications with mm and mm series extrusions Material: untreated steel Stock length: 1000 or 3030 mm 9 2 Description Weight T-Nut Bar, stock length: 1000 mm TIN kg T-Nut Bar, stock length: 3030 mm TIN kg TIN 0171 T-Nut In-Line Fastener Used for end-to-end connections of mm and mm series extrusions Material: galvanized steel M Description Base Part GST M08x012 SPI Weight T-Nut In-Line Fastener 1 6 TIN kg

28 85 M8 81 TIN 4545 Miter Fastener Fasteners for extrusions with miter cuts Material: galvanized steel Description Base Part countersink Base Part thread GST M08x012 SPI SKS M06x010 Weight Miter Fastener TIN kg TIN _000 Special Fastener For mounting parts onto Robotunits extrusions where no holes are to be seen from the outside of the assembly In contrast with all other Robotunits fasteners, this fastener requires drilling. L Material: galvanized steel, NBR M SW M GL D d SW Description GL SW M d D L Weight Special Fastener 15 5 M TIN kg Special Fastener 15 6 M TIN kg