Academic Qualifications

Transcription

1 Dr. Kausik Chattopadhyay Associate Professor Department of Metallurgical Engineering Indian Institute of Technology (BHU) Varanasi ; Phone: , ext.234 (O) Fax: Academic Qualifications 2008 Ph.D. in Metallurgy Dept. of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur 2003 M.Tech. in Metallurgy Dept. of Materials and Metallurgical Engineering, Indian Institute of Technology Kanpur 2000 B.E. in Metallurgy Department of Metallurgical Engineering, Bengal Engineering College (DU), Howrah (presently known as Indian Institute of Engineering Science and Technology, Shibpur) Teaching and Research Experience October till date: Associate Professor, Dept. of Met. Engg., IIT (BHU), Varanasi September 2007 September 2015: Assistant Professor, Dept. of Met. Engg., (IIT) BHU, Varanasi Field of Specialization: Physical Metallurgy / Mechanical Metallurgy Research Interest: Deformation behavior of metals and alloys, Fatigue and Fracture, Failure Analysis, Corrosion and Oxidation, Severe Plastic Deformation, Materials for dental and orthopedic applications, High temperature structural materials for aerospace and nuclear applications, Powder Metallurgy Teaching Subjects UG level: Mechanical Behaviour of Materials, Deformation and Testing of Materials (Theory & Practicals), Materials Selection and Design, Heat Treatment, Mechanical Working, Analysis and Automation in Mechanical Processing PG Level: Alloy Design and Technology, Deformation Behaviour, Fracture Mechanics and Component Integrity, Metal Joining Technology, Advanced Materials, Computer Application in Metallurgy (Practical) 1

2 Research Publications (1) No. of Papers published in refereed Journals and Conf. Proceedings: 41 (2) No. of Conference Presentations: ~23 (3) Project reports completed: 04 (Industrial consultancy Projects) (4) No. of citations of published papers: ~ 200 The work has been cited in the book on Structural Intermetallics and Intermetallic Matrix Composites by R Mitra. Selected Research Publications 1) K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, Effect of Mo on microstructure and mechanical behaviour of as-cast Nb ss -Nb 5 Si 3 composites, Intermetallics, 2006, 14(12), ) K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, Effect of Mo and Si on morphology and volume fraction of eutectic in Nb-Si-Mo alloys Materials Science and Engineering A., 2007, 456(1-2), ) K. Chattopadhyay, R. Mitra, and K. K. Ray, Non-isothermal and Isothermal Oxidation Behaviour of Nb-Si-Mo alloys Metall. Mater. Trans A., 2008, 39A, ) G. Sudhakar Rao, J.K. Chakravarty, N. Saibaba, G.S. Mahobia, K. Chattopadhyay, N.C. Santhi Srinivas, V. Singh, Low Cycle Fatigue Behavior of Zircaloy-2 at Room Temperature, Journal of Nuclear Materials, (2013), 441(1-3), ) Sanjeev Kumar, Sudhakar R G, Kausik Chattopadhyay, G.S. Mahobia, Santhi S N.C., Vakil Singh, Effect of Surface Nanostructure on Tensile Behaviour of Superalloy IN718, Materials and Design, 62 (2014), ) P. Singh, K. Chattopadhyay, I. Chakraborty, Effect of sub-critical tempering and deep cryogenic treatment on slurry erosion of Cr-Mn-Cu white cast irons, ISIJ International, (2014), Vol. 54, No ) Preeti Verma, G. Sudhakar Rao, P. Chellapandi, G.S. Mahobia, Kausik Chattopadhyay, N.C. Santhi Srinivas, Vakil Singh, Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr 1Mo steel, Materials Science & Engineering A, 621 (2015) ) V Pandey, SG Rao, K Chattopadhyay, NC Santhi Srinivas, V Singh, Surface Nanostructuring and Cyclic Deformation of Aluminum Alloy 2014, Materials Science and Engineering A, 647, (2015), ) Y Shadangi, K Chattopadhyay, S B Rai, V Singh, Effect of LASER Shock Peening on Microstructure, Mechanical Properties and Corrosion Behavior of Interstitial Free Steel, Surface and Coatings Technology, 280 (2015), ) Sanjeev Kumar, K Chattopadhyay, Vakil Singh, Effect of ultrasonic shot peening on low cycle fatigue behaviour of the Ti-6Al-4V alloy, Journal of Alloys and Compounds, vol. 724, pp , (2017). 2

3 Research Guidance B.Tech. Projects: 21 M.Tech. Thesis: 16 PhD Thesis: 01 (completed) 06 (ongoing) Projects Completed / Ongoing 1. Mechanical Behaviour of Nb-Si-Mo Alloys. (IT-BHU Special fund, BHU) (PI) 2. Low cycle fatigue behaviour of GTM-SU-718 at elevated temperature in marine environment, funded by GTRE, Rs.6.85 lakhs (Co-PI) 3. Effect of surface nanocrystallization on fatigue life of aeronautical alloys: Timetal 834 and IN718, funded by DST, Rs.39,70, (Co-PI) 4. Hot deformation behavior of indigenously developed nitrogen bearing stainless steels for critical applications, funded by IIT (BHU), Rs. 20 lakhs (Co-PI) 5. Study of Weibull Statistical Design Criterion for Nuclear Graphite Components, funded by Board of Research on Nuclear Sciences (BRNS), BARC, Rs Lakhs, (Co- PI) 6. Design and Development of Indigenous Dental Implant of Titanium, funded by DST, Rs.84,16, (Co-PI) 7. Studies on improvement in stiffness of aluminium alloys, submitted to DLJ, DRDO, Rs. 41 lakhs (Co-PI) 8. Development of nickel free nitrogen austenitic stainless steel for biomedical applications, submitted to Steel Development Fund, Ministry of Steel, Rs lakhs, (Co-PI). 9. Effect of severe plastic deformation via ultrasonic shot peening on corrosion and stress corrosion cracking behavior of Al-alloy 7075, submitted as Institute Project (Individual) for funding, IIT (BHU), Rs.14.9 lakhs (PI) Scholarship 1. West Bengal Middle Scholarship (by Govt of West Bengal in Class VIII of West Bengal Board standard exam) 2. National Scholarship (1993 and 1995) (by Govt. of India based on the merit in Secondary and Higher Secondary Exam.) 3. Postgraduate Fellowship ( ), IIT Kanpur 4. Institute Fellowship ( ) IIT Kharagpur 5. Senior Research Fellowship, 2007, CSIR 3

4 Awards / Achievements 1. Second Prize in oral presentation in National Metallurgist Day-Annual Technical meeting in November, 2004 (IIM), Thriuvananthapuram, India. 2. Second Prize in poster presentation in National Metallurgist Day-Annual Technical meeting in November, 2006 (IIM), Jamshedpur, India. 3. Received ARCI Technical Excellence Award in International Symposium for Research Scholars (ISRS) in December, 2006, IITM, Chennai, India 4. IEI Young Engineers Award " in Metallurgical and Materials Engineering discipline by the Institution of Engineers (India), Kolkata. Session Chair Chaired a technical session, in National Seminar on Emerging Trends in Iron and Steel Technology, December 11-12, 2010, BHU, Varanasi. Invited Talk Structure-property correlation of refractory silicide based alloy and composite The Fourth Asian Particle Technology Symposium, 2009, New Delhi, India. Effect of Ultrasonic shot peening on microstructure and mechanical properties of 316L stainless steel in International Conference on Advanced Materials and Energy Technology, December, 2014, IIEST Shibpur, Howrah, India. Low cycle fatigue behaviour of nanostructured Ti-6Al-4V subjected to ultrasonic shot peening, The 4th International Conference for Advanced Materials and Materials Processing (ICAMMP-IV) during 5 th to 7 th Nov 2016 held at IIT Kharagpur, India. Foreign Visit Attended and presented a paper on Effect of Surface Nanostructure on Tensile and Low Cycle Fatigue Behavior of Al 2014 Alloy, in the 6 th International Conference on Nanomaterials by Severe Plastic Deformation, June 30 July 4, 2014, Metz, France. Attended and presented a paper on Effect of Ultrasonic Shot peening on Hot Corrosion and Low Cycle Fatigue Behavior of Ti-6Al-4V Alloy, in the 7 th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7) to be held at Sydney, Australia from July2, 2017 to July 7,

5 Membership of Societies / Related Activities 1. Life Member, Indian Institute of Metals, Kolkata 2. Honorary Treasurer, Indian Institute of Metals, Varanasi Chapter ( ) 3. Honorary Secretary, Indian Institute of Metals, Varanasi Chapter ( ) 4. Vice-Chairman, Indian Institute of Metals, Varanasi Chapter, (2017- till date) 5. Life Member, Electron Microscope Society of India 6. Convener, Three Day Workshop on Metallurgy for Non-Metallurgists (MNM- 2015), Organised by IIT(BHU), Department of Metallurgical Engineering and TR Anantharaman Education And Research Foundation, Hyderabad, (December 08-10, 2015 at Department of Metallurgical Engineering, IIT (BHU), Varanasi, India) 7. Treasurer, EMSI 2016, International Conference on Electron Microscopy and XXXVII annual Meeting of Electron Microscope Society of India, 2016 Administrative Post Held 1. Vice-Chairman of Squash, IT-Gymkhana, BHU, ( ) 2. Departmental Representative of Senate Library Committee, IIT (BHU), ( ) 3. Warden, S C De Hostel, IIT (BHU) ( ) and C V Raman Hostel (2017-till date) 4. Member Secretary, Departmental Purchase Committee, IIT (BHU), Member, Academic Automation Coordination Committee, IIT (BHU), Any Other Information Attended Faculty Development Programme (FDP): Workshop on Emerging Trends in Materials Synthesis and Characterization, December 6-12, 2010, BHU, Varanasi. Attended 62 nd Orientation Course, UGC-Academic Staff College, BHU, September 4 to October 1, Industrial Visit: Vizag Steel Plant and Hindustan Aeronautics Limited Bangalore with 3 rd Year B.Tech. students in Reviewed few PhD thesis and Technical papers for Peer Reviewed Journal (MSEA, BOM, etc.) 5