FILCOTEN pro. FILCOTEN pro - Product range. Channels for heavy duty loads. Drainage systems

Transcription

1 NEW! FILCOTEN pro Channels for heavy duty loads 100 % recyclable Exceptionally light Accepts loads to Class E FILCOTEN pro - Product range. Drainage systems

2 FILCOTEN - the innovative concrete composite! We have developed a new material for our channel manufacturing process that unites many key advantages: reduced weight, increased strength and impact resistance - and eco-friendliness too. Channel bodies made from FILCOTEN compound - already proven in their effectiveness! The first HIGH-TECH concrete channel to offer long-term protection of the environment! Impact resistant and robust thanks to a FILCOTEN compound body accepts loads to Class E Pioneering - environmentally sustainable up to 50 % less raw materials and weight make for an ecologically sound product For the sake of our environment... The manufacturing process and the FILCOTEN mix of constituent materials have enabled us to produce channels that are 100% recyclable and eco-friendly. This has been confi rmed by an Environmental Impact Certifi cate and the accompanying test reports issued by the Soil and Construction Materials Testing Centre in Linz. What s more, the Institut für Baubiologie Rosenheim GmbH has awarded us the TESTED AND RECOMMENDED BY THE IBR seal of approval. For consumer information, this institute has set itself the objective of identifying building products that promote healthy living and are eco-friendly. 2 For more information about sustainability at BG:

3 ECO-FRIENDLY Natural building materials % recyclable able to be disposed of safely as construction waste, tested by the nationally-accredited Soil and Construction Materials Testing Centre in Linz ECO-FRIENDLY! Tested and recommended by the IBR non-polluting - free of resins, solvents and heavy metals - no styrene vapours, no biocides, no particulate pollution Reduced harmful environmental impact lower transport costs - reduced CO 2 emissions, no noise or dust pollution during manufacture IMPACT RESISTANT AND ROBUST Fibre-reinforced concrete-based material extremely rugged and temperature resistant - extremely high impact strength Accepts loads to Class E 600 kn as per EN 1433 bears truck/forklift traffic Resistant to de-icing salts tested according to EN 1433 by the Soil and Construction Materials Testing Centre IMPACT RESISTANT AND ROBUST! UV-resistant cement-based concrete material - resin free Higher fl exural strength than conventional concrete products 3

4 FILCOTEN pro - FEATURES 1 Available with 3 different : Cast iron, galvanized steel or stainless steel 6 Optimised channel geometry for maximum discharge rates and self-cleaning effect 2 Multiple anchorage points help to embed channel into cement-based grouts 7 Anchorage pockets for a secure hold in concrete foundations - and to counteract upward forces along the channel length 3 Edges with pre-formed indents for the fix self-locking system 8 Outlet preforming provided as standard in every channel 4 Sealable channel groove for a tight joint between individual sections 9 Solid ribs for maximum sidewall strength 5 Smooth interior surface for superior flow properties Applications. These FILCOTEN pro channels are particularly suitable for installation in commercial areas such as production plants and workshops, warehouses, car parks, car dealerships, petrol filling stations, in public areas and amenities such as pedestrian zones, residential areas, parks, sports complexes, town squares, railway stations as well as cycle and foot paths. In private dwellings they are used for driveways and courtyard access roads, terraces and similar surfaces.

5 10 Easy to install - fix self-locking system on every grating. The new fix self-locking system offers a four-point securement of covers in channel bodies. The locking clips on every grating type simply snap into the allocated notches on the side to fix the grating into position easily and securely. 11 Lugs on the underside of the cover prevent it from longitudinal movement Edges for every application! FILCOTEN pro channel bodies are available with cast iron (L-shaped), galvanized steel or stainless steel (h-shaped). KTL-coated cast iron Galvanized steel Stainless steel 5

6 FILCOTEN pro - the professional channel for civil engineering! Key advantages. 3 different edge types (cast iron, galvanized steel, stainless steel) Channels with or without interior slope of 0.5 % in all nominal widths 0.5 m elements for channels without slope (Nos. 0, 5-0, 10-0) mini shallow channels with reduced total height Gratings from Class A 15 kn to E 600 kn in mesh, slotted or elongated bar design Gratings with the fix self-locking system, protection against longitudinal movement and optional anti-vandalism locking devices Class E ductile iron elongated bar grating able to be bolted into cast iron Complete range of accessories - see page 15 Anti-vandalism locking device. Every grating type can also be fitted with an anti-vandalism locking device for each nominal width as an additional safeguard for the new fix self-locking system. Here s how it s done: Step 1: Insert the anti-vandalism locking device into the provided locking clips Step 2: Place the grating in the FILCOTEN pro channel Step 1 Step 2 Step 3: Push the grating firmly into the channel until it rests squarely on the Step 4: Secure the anti-vandalism locking device by tightening the bolt Step 3 Step 4 Application video: 6

7 Locking systems for gratings with several options! Four-point fix self-locking system for every grating type via locking clips Optional anti-vandalism locking device Ductile iron elongated bar grating able to be bolted into cast iron All covers secured against longitudinal movement Anti-vandalism locking device 4-point bolting Lieferprogramm: Bolting. Where a channel with a cast iron edge is selected, the Class E 600 kn ductile iron elongated bar grating can be secured with bolts. A ductile iron grating offering 4-point bolting is available for every nominal width - as indicated next to the grating pictures on the following product pages. The bolts/nuts are supplied as a set. On insertion, the captive nuts cannot become dislocated, yet can still be replaced easily and quickly. Bolting material - M10 Tightly-held captive nut Four-point bolting per grating 7

8 FILCOTEN pro / pro mini Nominal width 100 Channel body with cast-in solid in cast iron, galvanized steel or stainless steel. When installed correctly, the channel will accept loads up to Class E without sacrificing the advantages of lightness. Mesh and ductile-iron gratings are offered with the fix self-locking system and are fixed within the channel body. This channel, with galvanized or stainless-steel, is also available in particularly shallow heights of 60 and 80 mm. FILCOTEN pro V/E 100 FILCOTEN pro mini V/E 100 with or without slope without slope Channel body with galvanized- or stainless-steel - all dimensions in mm Applications Car parking areas, external storage areas, car dealerships, railway stations, housing estates, pedestrian zones, sports complexes and similar areas. System pro V / E / G Length 1000 mm Overall width 138 mm Nominal width 100 mm Slope 0.5 % Channel Nos Installation height mm mini: 60 / 80 mm Weight without grating 17,5-24,4 kg mini: 8,5 / 10,2 kg Channel body FILCOTEN pro 100. FILCOTEN pro G 100 with or without slope Channel type NW 100 Slope/ outlet Height at channel end cast iron galvanized st. steel mini 0 % 60 mm mini 0 % 80 mm mini 0 % / DN mm mini 0 % / DN mm /0 0 % 142 mm /5-0 0 % 170 mm / % 195 mm /1 0,5 % 150 mm /2 0,5 % 155 mm /3 0,5 % 160 mm /4 0,5 % 165 mm /5 0,5 % 170 mm /6 0,5 % 175 mm /7 0,5 % 180 mm /8 0,5 % 185 mm /9 0,5 % 190 mm /10 0,5 % 195 mm /0 0 % / DN mm /5-0 0 % / DN mm / % / DN mm /0 0 % / L=500 mm 142 mm /5-0 0 % / L=500 mm 170 mm / % / L=500 mm 195 mm Channel body with cast iron - all dimensions in mm 8

9 FILCOTEN pro Sump unit Nominal width 100 FILCOTEN pro sump units can be produced with cast-in cast iron, stainless steel or galvanized to complement the respective channel system. They can be combined with all covers. A factory fitted sewer-pipe coupling permits a simple and tight connection to all conventional PVC pipes. A foul-air trap can be retrofitted easily at any outlet. For details on individual accessories, see page System Length Overall width Nominal width Installation height Weight without grating pro V / E / G 500 mm 138 / 145 mm 100 mm 600 mm 32,4 / 32,4 / 32,9 kg DN all dimensions in mm Covers FILCOTEN pro 100. fix self-locking Dimensions Loading class as Slot/mesh Weight/ Inlet Material system covers in mm per EN-standard width in mm pce. cross-section Mesh grating MW 30/ Mesh grating Galvanized steel 1000/122/20 B 125 kn MW 30/10 2,8 kg 980 cm 2 /m Cl. B galvanized Galvanized steel 500/122/20 B 125 kn MW 30/10 1,4 kg 950 cm 2 /m Cl. C galvanized or stainless steel V2A Galvanized steel 1000/122/20 C 250 kn MW 30/10 3,3 kg 910 cm 2 /m Galvanized steel 500/122/20 C 250 kn MW 30/10 1,6 kg 885 cm 2 /m Stainless steel 1000/122/20 C 250 kn MW 30/10 3,3 kg 910 cm 2 /m Stainless steel 500/122/20 C 250 kn MW 30/10 1,6 kg 885 cm 2 /m Mesh grating MW 25/ Galvanized steel 1000/122/20 D 400 kn MW 25/16 7,4 kg 780 cm 2 /m Cl. D Galvanized steel 500/122/20 D 400 kn MW 25/16 3,8 kg 765 cm 2 /m galvanized Ductile iron elongated Ductile iron 500/122/20 C 250 kn MW 29/13 3,2 kg 505 cm 2 /m bar grating Ductile iron 500/122/20 D 400 kn MW 29/13 3,4 kg 495 cm 2 /m * Ductile iron 500/122/20 E 600 kn MW 22/13 4,2 kg 435 cm 2 /m Duc. iron slotted gr. Ductile iron 500/122/20 E 600 kn SW 14/100 3,8 kg 465 cm 2 /m Ductile iron elongated Please note: Acceleration, braking and turning forces must be taken into account separately. bar grating Observe the installation instructions. Subject to technical modifications. MW 29/13, Cl. C or D Accessories FILCOTEN pro 100. Accessories Material Weight/pce Sump unit G 500/145/600 incl. sewer-pipe coupling DN 100 FILCOTEN 32,9 kg Sump unit V 500/145/600 incl. sewer-pipe coupling DN 100 FILCOTEN 32,4 kg Sump unit E 500/145/600 incl. sewer-pipe coupling DN 100 FILCOTEN 32,4 kg Sediment bucket for sump unit Plastic 0,2 kg Odour trap made of PVC bends DN 150/87 Plastic 3,9 kg Retrofi ttable odour trap for sump unit DN 100 Plastic 0,1 kg Foul-air trap for bottom outlet DN 100 Plastic 0,2 kg Front/end cap (pro mini) Galvanized steel 0,1 kg Front/end cap (pro mini) Stainless steel V2A 0,1 kg Front/end cap Galvanized steel 0,2 kg End cap with outlet DN 100 Galvanized steel 0,3 kg Front/end cap Stainless steel V2A 0,2 kg End cap with outlet DN 100 Stainless steel V2A 0,3 kg Anti-vandalism locking device NW 100 0,1 kg 32103* Bolts/nuts for Class E ductile iron grating (1 pce. bolt, 1 pce. nut - 8 pcs. required per m) 0,1 kg Ductile iron elongated bar gratingg MW 22/13, Cl. E *optional 4-point bolting, only available in cast iron edgee Ductile iron slotted grating SW 14/100, Cl. E Accessories on page 15 9

10 FILCOTEN pro / pro mini Nominal width 150 Channel body with cast-in solid in cast iron, galvanized steel or stainless steel. When installed correctly, the channel will accept loads up to Class E - without sacrificing the advantages of lightness. Mesh and ductile-iron gratings are offered with the fix self-locking system and are fixed within the channel body. This channel is also available in particularly shallow heights of 120 and 170 mm. FILCOTEN pro V/E 150 FILCOTEN pro mini V 150 with or without slope without slope Channel body with galvanized- or stainless-steel - all dimensions in mm Applications Car parking areas, external storage areas, car dealerships, railway stations, housing estates, pedestrian zones, sports complexes and similar areas. System pro V / E / G Length 1000 mm Overall width 188 mm Nominal width 150 mm Slope 0.5 % Channel Nos Installation height mm mini: 120 / 170 mm Weight without grating 28,9-38,9 kg mini: 18 / 22,3 kg Channel body FILCOTEN pro 150. FILCOTEN pro G 150 with or without slope Channel type NW 150 Slope/ outlet Height at channel end cast iron galvanized st. steel mini 0 % 120 mm mini 0 % / DN mm mini 0 % 170 mm mini 0 % / DN mm /0 0 % 210 mm /5-0 0 % 235 mm / % 260 mm /1 0,5 % 215 mm /2 0,5 % 220 mm /3 0,5 % 225 mm /4 0,5 % 230 mm /5 0,5 % 235 mm /6 0,5 % 240 mm /7 0,5 % 245 mm /8 0,5 % 250 mm /9 0,5 % 255 mm /10 0,5 % 260 mm /0 0 % / DN mm /5-0 0 % / DN mm / % / DN mm /0 0 % / L=500 mm 210 mm /5-0 0 % / L=500 mm 235 mm / % / L=500 mm 260 mm Channel body with cast iron - all dimensions in mm 10

11 FILCOTEN pro Sump unit Nominal width 150 FILCOTEN pro sump units can be produced with cast-in cast iron, stainless steel or galvanized to complement the respective channel system. They can be combined with all covers. A factory fitted sewer-pipe coupling permits a simple and tight connection to all conventional PVC pipes. A foul-air trap can be retrofitted easily at any outlet. For details on individual accessories, see page System Length Overall width Nominal width Installation height Weight without grating pro V / E / G 500 mm 188 / 200 mm 150 mm 670 mm 44,5 / 44,5 / 45,0 kg DN all dimensions in mm Covers FILCOTEN pro 150. fix self-locking Dimensions Loading class as Slot/mesh Weight/ Inlet Material system covers in mm per EN-standard width in mm pce. cross-section Mesh grating Galvanized steel 1000/172/20 B 125 kn MW 30/10 4,6 kg 1330 cm 2 /m Galvanized steel 500/172/20 B 125 kn MW 30/10 2,4 kg 1285 cm 2 /m Galvanized steel 1000/172/20 C 250 kn MW 30/10 6,9 kg 1280 cm 2 /m Galvanized steel 500/172/20 C 250 kn MW 30/10 3,6 kg 1240 cm 2 /m Stainless steel 1000/172/20 C 250 kn MW 30/10 6,9 kg 1280 cm 2 /m Stainless steel 500/172/20 C 250 kn MW 30/10 3,6 kg 1240 cm 2 /m Galvanized steel 1000/172/20 D 400 kn MW 25/16 11,5 kg 1090 cm 2 /m Galvanized steel 500/172/20 D 400 kn MW 25/16 5,8 kg 1065 cm 2 /m Ductile iron elongated Ductile iron 500/172/20 C 250 kn MW 29/13 4,9 kg 710 cm 2 /m bar grating Ductile iron 500/172/20 D 400 kn MW 29/13 5,2 kg 710 cm 2 /m * Ductile iron 500/172/20 E 600 kn MW 22/13 7,2 kg 640 cm 2 /m Duc. iron slotted gr. Ductile iron 500/172/20 E 600 kn SW 14/150 7,0 kg 710 cm 2 /m Please note: Acceleration, braking and turning forces must be taken into account separately. Observe the installation instructions. Subject to technical modifications. Accessories FILCOTEN pro 150. Accessories Material Weight/ pce Sump unit G 500/200/690 incl. sewer-pipe coupling DN 150 FILCOTEN 45,0 kg Sump unit V 500/200/690 incl. sewer-pipe coupling DN 150 FILCOTEN 44,5 kg Sump unit E 500/200/690 incl. sewer-pipe coupling DN 150 FILCOTEN 44,5 kg Sediment bucket for sump unit Plastic 0,3 kg Odour trap made of PVC bends DN 150/87 Plastic 3,9 kg Retrofi ttable odour trap for sump unit DN 150 Plastic 0,2 kg Front/end cap (pro mini) Galvanized steel 0,1 kg Front/end cap Galvanized steel 0,5 kg End cap with outlet DN 150 Galvanized steel 0,7 kg Front/end cap Stainless steel V2A 0,5 kg End cap with outlet DN 150 Stainless steel V2A 0,7 kg Anti-vandalism locking device NW 150 0,1 kg 32103* Bolts/nuts for Class E ductile iron grating (1 pce. bolt, 1 pce. nut - 8 pcs. required per m) 0,1 kg Mesh grating MW 30/10 Cl. B galvanized Cl. C galvanized or stainless steel V2A Mesh grating MW 25/16 Cl. D galvanized Ductile iron elongated bar grating MW 29/13, Cl. C or D Ductile iron elongated bar gratingg MW 22/13, Cl. E *optional 4-point bolting, only available in cast iron edgee Ductile iron slotted grating SW 14/150, Cl. E Accessories on page 15 11

12 FILCOTEN pro / pro mini Nominal width 200 Available from October 2013 Channel body with cast-in solid in cast iron, galvanized steel or stainless steel. When installed correctly, the channel will accept loads up to Class E - without sacrificing the advantages of lightness. Mesh and ductile-iron gratings are offered with the fix self-locking system and are fixed within the channel body. This channel is also available in particularly shallow heights of 120 and 200 mm. FILCOTEN pro V/E 200 FILCOTEN pro mini V 200 with or without slope without slope Channel body with galvanized- or stainless-steel - all dimensions in mm Applications Car parking areas, external storage areas, car dealerships, railway stations, housing estates, pedestrian zones, sports complexes and similar areas. System pro V / E / G Length 1000 mm Overall width 238 mm Nominal width 200 mm Slope 0.5 % Channel Nos Installation height mm mini: 120 / 200 mm Weight without grating 43,2-52,9 kg mini: 21 / 28,5 kg Channel body FILCOTEN pro 200. FILCOTEN pro G 200 with or without slope Channel type NW 200 Slope/ outlet Height at channel end cast iron galvanized st. steel mini 0 % 120 mm mini 0 % / DN mm mini 0 % 200 mm mini 0 % / DN mm /0 0 % 265 mm /5-0 0 % 290 mm / % 315 mm /1 0,5 % 270 mm /2 0,5 % 275 mm /3 0,5 % 280 mm /4 0,5 % 285 mm /5 0,5 % 290 mm /6 0,5 % 295 mm /7 0,5 % 300 mm /8 0,5 % 305 mm /9 0,5 % 310 mm /10 0,5 % 315 mm /0 0 % / DN mm /5-0 0 % / DN mm / % / DN mm /0 0 % / L=500 mm 265 mm /5-0 0 % / L=500 mm 290 mm / % / L=500 mm 315 mm Channel body with cast iron - all dimensions in mm 12

13 FILCOTEN pro Sump unit Nominal width 200 FILCOTEN pro sump units can be produced with cast-in cast iron, stainless steel or galvanized to complement the respective channel system. They can be combined with all covers. A factory fitted sewer-pipe coupling permits a simple and tight connection to all conventional PVC pipes. A foul-air trap can be retrofitted easily at any outlet. For details on individual accessories, see page System Length Overall width Nominal width Installation height Weight without grating pro V / E / G 500 mm 238 / 265 mm 200 mm 750 mm 48 / 48 / 48,4 kg DN all dimensions in mm Covers FILCOTEN pro 200. fix self-locking Dimensions Loading class as Slot/mesh Weight/ Inlet Material system covers in mm per EN-standard width in mm pce. cross-section Mesh grating Galvanized steel 1000/222/20 B 125 kn MW 30/10 6,0 kg 1775 cm 2 /m Galvanized steel 500/222/20 B 125 kn MW 30/10 3,1 kg 1720 cm 2 /m Galvanized steel 1000/222/20 C 250 kn MW 30/10 8,8 kg 1650 cm 2 /m Galvanized steel 500/222/20 C 250 kn MW 30/10 4,5 kg 1595 cm 2 /m Stainless steel 1000/222/20 C 250 kn MW 30/10 8,8 kg 1650 cm 2 /m Stainless steel 500/222/20 C 250 kn MW 30/10 4,5 kg 1595 cm 2 /m Galvanized steel 1000/222/20 D 400 kn MW 25/16 16,0 kg 1400 cm 2 /m Galvanized steel 500/222/20 D 400 kn MW 25/16 8,0 kg 1365 cm 2 /m Ductile iron elongated Ductile iron 500/222/20 C 250 kn MW 29/13 7,3 kg 955 cm 2 /m bar grating Ductile iron 500/222/20 D 400 kn MW 29/13 9,9 kg 940 cm 2 /m * Ductile iron 500/222/20 E 600 kn MW 22/13 11,7 kg 780 cm 2 /m Duc. iron slotted gr. Ductile iron 500/222/20 E 600 kn SW 14/200 10,3 kg 965 cm 2 /m Please note: Acceleration, braking and turning forces must be taken into account separately. Observe the installation instructions. Subject to technical modifications. Accessories FILCOTEN pro 200. Accessories Material Weight/ pce Sump unit G 500/265/750 incl. sewer-pipe coupling DN 200 FILCOTEN 48,4 kg Sump unit V 500/265/750 incl. sewer-pipe coupling DN 200 FILCOTEN 48,0 kg Sump unit E 500/265/750 incl. sewer-pipe coupling DN 200 FILCOTEN 48,0 kg Sediment bucket for sump unit Plastic 0,4 kg Odour trap made of PVC bends DN 200/87 Plastic 7,4 kg Front/end cap (pro mini) Galvanized steel 0,1 kg Front/end cap Galvanized steel 0,7 kg End cap with outlet DN 200 Galvanized steel 1,1 kg Front/end cap Stainless steel V2A 0,7 kg End cap with outlet DN 200 Stainless steel V2A 1,1 kg Anti-vandalism locking device NW 200 0,1 kg 32103* Bolts/nuts for Class E ductile iron grating (1 pce. bolt, 1 pce. nut - 8 pcs. required per m) 0,1 kg Mesh grating MW 30/10 Cl. B galvanized, Cl. C galvanized or stainless steel V2A Mesh grating MW 25/16 Cl. D galvanized Ductile iron elongated bar grating MW 29/13, Cl. C or D Ductile iron elongated bar grating MW 22/13, Cl. E *optional 4-point bolting, only available in cast iron edge Ductile iron slotted grating SW 14/200, Cl. E Accessories on page 15 13

14 General installation guidelines: The following installation guidelines and installation examples are intended for conventional applications. The load class and installation site, as specified in EN1433, must be adapted to local conditions by the respective architectural office. The codes and regulations generally familiar to the trade must be heeded during installation. Installation instructions and installation examples: Installation instructions FILCOTEN pro: 1. BG concrete channels are to be laid on a concrete foundation compliant with Austrian standard B4710-1, or in a drain concrete compliant with RVS 8:18:01, paying attention to the desired fall during excavation. Depending on static requirements, a lateral support wedge may be necessary - for details see table and crosssections. Channel elements should, in principle, be placed into position using the appropriate tools (e.g. BG lifting grab). 2. For sloped channels, observe the different heights. The channel run should be placed into position starting at the discharge transition point. The direction of flow on each channel is indicated by an arrow. 3. The rebated joints between individual channel bodies may be sealed or bonded using suitable sealants - refer to the BG Sealing System for material descriptions and quantity determination information. 4. Insert the grating covers into channel bodies, and secure where applicable, or sufficiently brace the channel against compression prior to laying the adjoining surface covering. Take care not to damage channels during compaction of the surfacing and the surface covering (asphalt, paving stones, concrete, etc.). 5. A sufficiently large expansion joint, positioned mm from the channel, must be provided at the junction to the carriageway where horizontal forces are anticipated (e.g. for concrete surfaces, inclines, etc.). Expansion joints passing across the channel run are to be positioned in the adjoining concrete surfaces so that they pass through a channel joint. 6. Depending on the application, the frequency and speed with which channels are crossed, in highly trafficked areas we recommend that covers are secured in position with the antivandalism locking device. Four-point bolting is available for Class E ductile iron gratings on channels with cast iron. Where gratings are bolted on, ensure that a lasting, friction-locked screwed joint is created. 7. All adjacent surface coverings should be laid to be 3-5 mm permanently higher than the channel surface in order to avoid mechanical damage (e.g. during snow clearance) and to ensure proper water runoff. 8. We recommend the installation of drainage channels with stainless steel side and stainless steel covers in areas where the possibility of chemical influences (e.g. de-icing agents, acids, alkalis, etc.) is high. 9. The same installation principles apply to sump units. Load class Foundation - concrete grade A 15 kn B 125 kn C 250 kn D 400 kn E 600 kn according to Ö-Norm B as per EN197-1* C16/20 C20/25 C20/25 C25/30 C25/30 X > 8 cm > 10 cm > 15 cm > 15 cm > 15 cm Total height of Y min. channel height -5 cm channel element Z > 8 cm > 10 cm > 15 cm > 20 cm > 20 cm Reinforcement bar / DN 8 mm Not required armouring every 20 cm *Concrete grade is a minimum requirement and must be adapted to local requirements. Front cap 101/ /5-0 SK Sump unit (or end cap) Cavity-free joint sealing 3-5 mm Bituminous joint strip Expansion joint 3-5 mm Expansion joint Paving stones Gravel bed Concrete foundation Load-bearing crushed rock course X Z Y X Wearing course Bitumen binder course Bitumen base course Load-bearing crushed rock course Concrete road surface Concrete foundation Load-bearing crushed rock course Z X 14 For more information, please visit our website at or, in the case of unconventional installation conditions, contact our application engineers directly.

15 Accessories FILCOTEN pro 1 1 Bottom outlet made of PVC sewer pipes - on site installation (see Figure 2a) Dimension X 2 3 a) b) c) d) 4 2 a) Prefabricated DN 100 outlet opening Positioning of outlet opening: Dimension X = channel end to outlet centre = 250 mm b) Odour trap for bottom outlet consisting of 3 pieces c) Outlet pipe of foul-air trap is inserted into outlet opening from below d) The two remaining parts complete the foul-air trap - fi nished! 3 FILCOTEN pro sump unit L = 500 mm, to fit NW 4 Sediment bucket in plastic for sump unit to fi t NW - acts as a dirt trap 5 a) Retrofi ttable odour trap for sump unit DN 100 or 150 b) Odour trap made of PVC bends for sump units - suitable for sump units with outlets DN 150/200 6 Front/end cap for FILCOTEN pro mini 7 Front/end cap + end cap with outlet FILCOTEN pro 8 Anti-vandalism locking device - for all covers - except Class D gratings 5 a) b) 6 9 Bolt/nut for Class E ductile iron elongated bar gratings in cast iron edge - captive nut replaceable

16 BG-Graspointner - Drainage systems BG-Graspointner is a complete system supplier offering a comprehensive range of products and services for all applications. Steel and concrete channels for pedestrian through to heavy-goods vehicle traffic. BG-Graspointner systems are fully compatible with each other. A company proud of its excellent customer service your drainage partner since 1974 from professional advice through to on-site installation four production plants (AT, SK, RO, RU) present across Europe in 25 countries Product literature can be requested at: FURTHER PRODUCTS IN THE FILCOTEN RANGE: FILCOTEN... The FILCOTEN light is manufactured in a 100 and 150 NW with constant depth or sloped invert units. Slotted, interlocking- and ductile iron mesh gratings in load classes A 15 kn to C 250 kn are available as covers. The light system is ideal for installation with block paving, setts or floor tiles. The gratings rest directly on the channel body and can be locked into position using patent or fixing clips. FILCOTEN light - a simple-to-install and inexpensive channel for many applications! The FILCOTEN tec is available in a 100, 150 and 200 NW with constant depth or sloped invert units. Covers in a slotted, interlocking- and ductile iron mesh design in load classes A 15 kn to C 250 kn complement the range. Adjoining ground surfaces such as asphalt can be laid cleanly and quickly against the of channels. Gratings are anchored within channel bodies using the innovative fix self-locking system with the option of using anti-vandalism locking devices to prevent the removal of gratings. FILCOTEN tec - the outstanding and highly versatile channel system!...tec...light Drainage systems BG-Graspointner GmbH & Co KG, A-4882 Oberwang (Mondseeland), Gessenschwandt 39, Tel: ( ) , Fax: DW 303, office@bg-company.com, Issue 01