June 25, 2012 Publication List Mohsen Asle Zaeem (Ph.D.)

Transcription

1 MOHSEN ASLE ZAEEM Roberta and G. Robert Couch Assistant Professor of Materials Science and Engineering Department of Materials Science and Engineering Missouri University of Science and Technology 223 McNutt Hall Rolla, MO PUBLICATION LIST Submitted/In Preparation Journal Papers [1] M. Asle Zaeem, H. Yin, S. Felicelli, Modeling dendritic solidification of Al 3%Cu using cellular automaton and phase-field methods. Submitted to Applied Mathematical Modelling (2012), Elsevier. [2] L.G. Hector, H. El Kadiri, J.C. Baird, R. Florea, M. Asle Zaeem, H. Rhee, Microstructure and defect formation in steel spot welds. Submitted to Acta Materialia (2012), Elsevier. [3] Emad M. El-Giar, M. Asle Zaeem, H. El Kadiri, R.S. Florea, H. Rhee, Y. BienvDnu, M. Dahmen, T. Malot, Laser welding of thin steel sheets. Submitted to Science and Technology of Welding and Joining, (2012), Elsevier. [4] R.S. Florea, L.B. Priddy, M. Asle Zaeem, A. Lowry, L.N. Williams, J. Liao, M.F. Horstemeyer, Damage mechanisms in blunt carotid artery injuries, Submitted to Journal of Biomechanical Engineering (2012). [5] M. Asle Zaeem, S. Nouranian, M.F. Horstemeyer, Morphological study of crystal growth in polycrystalline polymers by phase-field modeling. In preparation for J. Polymer Science Part B (2012). [6] M. Mamivand, M. Asle Zaeem, H. El Kadiri, Phase field modeling of martensitic phase transformation-a review, In preparation for Materials Letters (2012). [7] M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, Experimental and phase-field studies of oxidation mechanisms of zirconium alloys. In preparation for Acta Materialia (2012), Elsevier. [8] M. Asle Zaeem, B. Davis, M. Tschopp, M.F. Horstemeyer, Phase-field modeling of grain growth in HCP metals. In preparation for Computational Materials Science (2012), Elsevier. Peer-Reviewed Journal Publications [9] S. Wang, M. Asle Zaeem, M.F. Horstemeyer, P. Wang, Thermal effects on the morphological evolution during crystallization of HCP metals: A three dimensional phase-field study. Accepted in Materials Technology (2012). [10] M. Asle Zaeem, H. Yin, S. Felicelli, Comparison of cellular automaton and phase field methods to simulate dendrite growth in hexagonal systems, Journal of Materials Science and Technology 28 (2) (2012) , Elsevier Journals. doi: /S (12) Page 1 of 5

2 [11] H. Alihosseini, M. Asle Zaeem, K. Dehghani, H. A. Shivaee, Producing ultrafine-grained aluminum rods by cyclic forward-backward extrusion: Study the Microstructures and Mechanical Properties, Materials Letters 74 (2012) , Elsevier Journals. doi: /j.matlet [12] M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, M. Khafizov, Z. Utegulov, Effects of internal stresses and intermediate phases on the coarsening of coherent precipitates: A phasefield study. Current Applied Physics 12 (2012) , Elsevier Journals. doi: /j.cap [13] H. Alihosseini, M. Asle Zaeem, K. Dehghani, A cyclic forward-backward extrusion process as a novel severe plastic deformation for production of ultrafine grains. Materials Letters 68 (2012) doi: /j.matlet [14] M. Asle Zaeem, H. El Kadiri, P. Wang, M.F. Horstemeyer, Investigating the effects of grain boundary energy anisotropy and second phase particles on grain growth using a phase-field model. Computational Materials Science 50 (2011) doi: /j.commatsci [15] M. Asle Zaeem, H. El Kadiri, S.Dj. Mesarovic, M.F. Horstemeyer, P. Wang, Effect of the compositional strain on the diffusive interface thickness and on the phase transformation in a phase-field model for binary alloys. Journal of Phase Equilibria and Diffusion 32 (2011) doi: /s y. [16] M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, P.Wang, The role of compositional strain in the stability of solid-fluid thin film interfaces. Modern Physics Letters B 25 (2011) doi: /S [17] M. Asle Zaeem and S.Dj. Mesarovic, Morphological instabilities in multilayer thin films: Evolution maps. Computational Materials Science 50 (2011) doi: /j.commatsci [18] S. Yazdan Parast, I. Jauhari, M. Asle Zaeem, Implanation of HA into superplastic Ti-6Al-4V: Kinetics and mechanical properties of implanted layer. Metallurgical and Materials Transactions A 42 (2011) doi: /s z. [19] M. Asle Zaeem and S.Dj. Mesarovic, Finite element method for conserved phase-fields: stress-mediated diffusional phase transformations. Journal of Computational Physics 229 (2010) doi: /j.jcp [20] S. Yazdan Parast, I. Jauhari, M. Asle Zaeem, A.H. Mohamad Dom, H. Mohd Khalid, Embedment of HA into superplastic Ti-6Al-4V: Effects of implantation temperature. Advance Materials Research (2010) doi: / [21] M. Asle Zaeem and S.Dj. Mesarovic, Investigation of phase transformation in thin film using finite element method. Solid State Phenomena 150 (2009) doi: / [22] M. Asle Zaeem, M.R. Nami, and M.H. Kadivar, Prediction of welding buckling distortion in a thin wall aluminum T joint. Computational Materials Science 38 (2007) doi: /j.commatsci Page 2 of 5

3 [23] M. Asle Zaeem, M.R. Nami, I. Rajabi, and M.H. Kadivar, Investigation of global buckling distortion in welding of a thin wall aluminum T joint. Material Science Forum (2006) doi: / Peer-Reviewed Conference Publications [24] H. Alihosseini, M. Asle Zaeem, K. Dehghani, A cyclic forward-backward extrusion process for production of nano grains NSTI Nanotechnology Conference & Expo, Santa Clara, USA, Nanotech vol. 2 (2012) [25] M. Asle Zaeem, H. Yin, S. Felicelli, L. Wang, Comparison of cellular automaton and phase field models to simulate dendritic solidification. 4th Int. Multi-Conference on Eng. and Tech. Innovation, Orlando, USA, IMETI 1 (2011) [26] M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, P.Wang, The roles of grain boundary energy anisotropy and second phase particles on grain growth in polycrystalline materials. 4th Int. Multi-Conference on Eng. and Tech. Innovation, Orlando, USA, IMETI 1 (2011) [27] M. Asle Zaeem, H. El Kadiri, S.Dj. Mesarovic, P.Wang, M.F. Horstemeyer, A finite elementphase field model study of solid state phase transformation. TMS Conf. Proc. 3 (2011) [28] M. Asle Zaeem and S.Dj. Mesarovic, A phase-field finite element model for instabilities in multilayer thin films. Published in 'Deformation Mechanisms, Microstructure Evolution, and Mechanical Properties of Nanoscale Materials' MRS Symposium Proceedings, vol. 127, 2010 MRS Fall Meeting. [29] M. Asle Zaeem and S.Dj. Mesarovic, A Galerkin finite element model for conserved phasefields. 16th US National Congress of Theoretical and Applied Mechanics, Pennsylvania, USA, 06/2010. [30] M. Asle Zaeem, Sergey Lapin, Konstantin Matveev, The effect of vibration on flow rate of non-newtonian fluid. SIAM Conference on Mathematics for Industry, San Francisco, SIAM (2009) [31] M. Asle Zaeem, Konstantin Matveev, Sergey Lapin, Study of vibration in non-newtonian flow. International Conference on Computational and Information Sciences, Houston, USA, 05/2009. [32] M. Asle Zaeem and S.Dj. Mesarovic, Finite element modeling of a diffusion-controlled phase transformation in thin film. ASME International Mechanical Engineering Congress and Exposition, Boston, USA, ASME Conf. Proc. 12 (2008) doi: /imece [33] S. Yasdanparast, M. Asle Zaeem, Iraj Rajabi, Prediction of residual stresses and buckling distortion in welding of a thin wall aluminum butt joint. 8th Biennial ASME Conf. on Engineering Systems Design and Analysis, Torino, Italy, ASME Conf. Proc. 4 (2006) doi: /esda Page 3 of 5

4 [34] M. Asle Zaeem, M.R. Nami, M.H. Kadivar, Nonlinear analysis of local buckling in welding of a thin wall aluminum structure. International Conference on Modeling and Simulation, Malaysia, 04/2006. [35] M. Asle Zaeem, S. Yazdanparast, M.R. Hematiyan, Investigation of local buckling in welding of a thin wall aluminum butt joint. International Conference on Modeling and Simulation, Malaysia, 04/2006. [36] M. Asle Zaeem, M.R. Nami, Three dimensional finite element simulation of welding of a thick plate flange by using Anand viscoplastic model. ASME Conference, Long Beach, California, USA, ASME Conf. Proc. 4b (2005) doi: /DETC [37] A. Akbarpour, M. Asle Zaeem, J. Moosavi, H. Molaee, The effect of geometric parameters on the performance of E/glass epoxy single and double lap joints. Int. Conf. on Recent Advances in Mechanical and Materials Engineering, Kuala Lumpur, Malaysia, 04/2005. CONFERENCE/POSTER PRESENTATIONS 04/2012 B. Davis, M. Asle Zaeem, Investigating the effects of grain boundary energy anisotropy and second-phase particles on the grain growth of an HCP metal, American Society for Engineering Education Annual Conference, Starkville Mississippi (B. Davis received the 2 nd place Undergraduate Research Award). 10/2011 M. Asle Zaeem, H. Yin, S. Felicelli, Simulation of dendritic solidification in cubic and HCP crystals by cellular automaton and phase-field models. COMSOL Conference, Boston, USA (Best Poster Award). 07/2011 M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, Grain growth in polycrystalline materials. 4th Int. Multi-Conference on Engineering and Technological Innovation, Orlando, USA. 07/2011 M. Asle Zaeem, H. Yin, S. Felicelli, Simulating dendritic solidification. 4th International Multi-Conference on Engineering and Technological Innovation, Orlando, USA. 02/2011 M. Asle Zaeem, H. El Kadiri, M.F. Horstemeyer, P.Wang, The effects of grain boundary energy anisotropy and second phase particles on grain growth. TMS, San Diego, USA. 02/2011 M. Asle Zaeem, H. El Kadiri, S.Dj. Mesarovic, M.F. Horstemeyer, P.Wang, A Finite Element-Phase Field Study of Solid State Phase Transformation: Coarsening of Coherent Precipitates and Instability of Multilayer Thin Films. TMS, San Diego, USA. 11/2010 M. Asle Zaeem and S.Dj. Mesarovic, Instabilities in multilayer thin films: Evolution maps. MRS Fall Meeting, Boston, USA. 07/2010 M. Asle Zaeem and S.Dj. Mesarovic, Morphological instabilities in thin films: a phase-field finite element model. Beirut, Lebanon, (Poster). Page 4 of 5

5 06/2010 M. Asle Zaeem and S.Dj. Mesarovic, A Galerkin finite element model for conserved phase-fields. 16th US National Congress of Theoretical and Applied Mechanics, Pennsylvania, USA. 03/2010 M. Asle Zaeem, S. Lapin, The effect of vibration on flow rate of non-newtonian fluid. Washington State University Research Exchange, WA, (Poster). 10/2008 M. Asle Zaeem and S.Dj. Mesarovic, Finite element modeling of a diffusioncontrolled phase transformation in thin film. ASME International Mechanical Engineering Congress, Boston. 04/2006 M. Asle Zaeem, M.R. Nami, M.H. Kadivar, Nonlinear analysis of local buckling in welding of a thin wall aluminum structure. Int. Conf. Modeling and Simulation, Malaysia. Page 5 of 5