~ Springer-Verlag Wien GmbH
|
|
- Violet Armstrong
- 6 years ago
- Views:
Transcription
1 ~ Springer-Verlag Wien GmbH
2 CISM COURSES AND LECTURES Series Editors: The Rectors Manuel Garcia Velarde - Madrid Jean Salen<;on - Palaiseau Wilhelm Schneider - Wien The Secretary General Bernhard Schrefier - Padua Executive Editor Carlo Tasso- Udine The series presents lecture notes, monographs, edited works and proceedings in the field of Mechanics, Engineering, Computer Science and Applied Mathematics. Purpose of the series is to make known in the international scientific and technical community results obtained in some of the activities organized by CISM, the International Centre for Mechanical Sciences.
3 INTERNATIONAL CENTRE FOR MECHANICAL SCIENCES COURSES AND LECTURES - No. 464 MECHANICS OF MICROSTRUCTURED MATERIALS EDITED BY HELMUT J. BOHM VIENNA UNIVERSITY OF TECHNOLOGY Springer-Verlag Wien GmbH
4 The publication of this volume was co-sponsored and co-financed by the UNESCO Venice Office - Regional Bureau for Science in Europe (ROSTE) and its content corresponds to a CISM Advanced Course supported by the same UNESCO Regional Bureau. This volume contains 180 illustrations This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concemed specifically those of translation, reprinting, re-use of illustrations, broadcasting, reproduction by photocopying machine or similar means, and storage in data banks by Springer-Verlag Wien Originally published by CISM, Udine in SPIN In order to make this volume available as economically and as rapidly as possible the authors' typescripts have been reproduced in their original forms. This method unfortunately has its typographicallimitations but it is hoped that they in no way distract the reader. ISBN ISBN (ebook) DOI /
5 PREFACE The last decades have witnessed a strong thrust towards improving existing structural materials and to develop new ones, the long-term aim being a capability to tailor materials for specific applications. This environment - in combination with a remarkable increase in computing power - has been instrumental in giving rise to marked improvements in modeling capabilities and experimental methods aimed at obtaining a better understanding of the thermomechanical behavior of engineering materials. One field that has benefitted strongly from these trends is continuum mechanical methods for studying inhomogeneous materials. The CISM Course on "Mechanics of Microstructured Materials", which was held in U dine from July 7 to July 11, 2003, accordingly aimed at presenting selected state-of-the-art theoretical tools in this field of research in close integration with related experimental developments. Like the course, the present book is structured to consist of a short overview of modeling approaches in continuum micromechanics together with contributions on a number of research topics that are of current interest in the study of microstructured materials. Methods for modeling damage of and cracks in microstructured materials are a core issue, with the topics covered including descriptions of the fracture of brittle reinforcements in composites, thermomechanical cohesive zone models, and simulations of creep rupture in polycrystalline materials. A second focus lies in experimental and statistical methods for the description and classification of microstructures and statistically based methods for assessing the stress and strain fields. Advanced descriptions for the elastoplastic behavior of metals are a third point of emphasis, with contributions on crystal plasticity and discrete dislocation models. Finally, studies are provided that concentrate on modeling strategies for the thermomechanical behavior of specific microstructured materials, such as discontinuously reinforced composites and graded carbon-carbon composites. Together these contributions are intended to provide a framework for introducing the reader to current trends and different points of view in studying the mechanical behavior of microstructured materials. Finally, it is my pleasure to thank the lecturers at the CISM course and contributors to this book, Javier LLorca, Peter McHugh, Ryszard Pyrz, Thomas Siegmund and Erik van der Giessen. I would also like to express my appreciation of the active participation by the 31 attendees of the course, who came from 15 different countries. Last, but not least, the efficient support by the rectors and the staff of CISM is most gratefully acknowledged. Helmut J. Bohm
6 CONTENTS A Short Introduction to Continuum Micromechanics by H.J. Bohm... 1 Modeling the Mechanical Behavior of Short Fiber Reinforced Composites by H. J. Bohm Thermomechanical Cohesive Zone Models for the Analysis of Composite Failure under Thermal Gradients and Transients by A. Hattiangadi and T. Siegmund Deformation and Damage in Particle-Reinforced Composites: Experiments and Models by J. LLorca Introduction to Crystal Plasticity Theory by P.E. McHugh Microstructural Description of Composites, Statistical Methods by R. Pyrz Processing-Microstructure-Property Relationships in Short Fiber Reinforced Carbon-Carbon Composite System by T. Siegmund, R. Cipra, J. Liakus, B. Wang, M. LaForest and A. Fatz Discrete Dislocation Plasticity by E. Van der Giessen Creep Rupture in Polycrystalline Materials by E. Van der Giessen
High Temperature Component Life Assessment
High Temperature Component Life Assessment High Temperature Component Life Assessment G.A. Webster Professor of Engineering Materials Department of Mechanical Engineering Imperial College of Science, Technology
More informationCISM International Centre for Mechanical Sciences
CISM International Centre for Mechanical Sciences Courses and Lectures Volume 578 Series editors The Rectors Friedrich Pfeiffer, Munich, Germany Franz G. Rammerstorfer, Vienna, Austria Elisabeth Guazzelli,
More informationMATERIALS SCIENCE RESEARCH. Volume 1
MATERIALS SCIENCE RESEARCH Volume 1 MATERIALS SCIENCE RESEARCH Volume 1 The Proceedings of the Research Conference on Structure and Properties of Engineerin~ Materials, held March 12-13, 1962, at North
More informationCristian Teodosiu. Elastic Models. of Crystal Defects. With 58 Figures. Editura Academiei Bucure~ti
Cristian Teodosiu Elastic Models of Crystal Defects With 58 Figures Editura Academiei Bucure~ti Springer-Verlag Berlin Heidelberg GmbH 1982 Cristian Teodosiu Department of Solid Mechanics Institute for
More informationIntroductory Optimization Dynamics
Pierre N. V. Tu Introductory Optimization Dynamics Optimal Control with Economics and Management Science Applications With 85 Figures Springer-Verlag Berlin Heidelberg GmbH 1984 Dr. Pierre Ninh Van Tu
More informationMULTI-SCALE & MICROMECHANICS
graduate course MULTI-SCALE & MICROMECHANICS November 6 th 8 th 2012 November 13 nd 15 th 2012 Mechanics of Materials Department of Mechanical Engineering Eindhoven University of Technology General This
More informationStochastic Models in Reliability and Maintenance
Stochastic Models in Reliability and Maintenance Springer-Verlag Berlin Heidelberg GmbH Shunji Osaki Editor Stochastic Models in Reliability and Maintenance With 46 Figures and 11 Tables " Springer Professor
More informationAdvanced Series in Agricultural Sciences 1
Advanced Series in Agricultural Sciences 1 Co-ordinating Editor: B. Varon, Bet-Dagan Editors: G. W. Thomas, Lexington B.R. Sabey, Fort Collins Y. Vaadia, Bet-Dagan L. D. Van Vleck, Ithaca A.PA.Vink Land
More informationManaging e-business Projects
Managing e-business Projects Springer-Verlag Berlin Heidelberg GmbH Thomas Stoehr Managing e-business Projects 99 Key Success Factors With 37 Figures and 12 Tables Springer Thomas Stoehr Overbeckstr. 7
More informationTHEORY OF THERMO MECHANICAL PROCESSES IN WELDING
THEORY OF THERMO MECHANICAL PROCESSES IN WELDING Theory of Thermomechanical Processes in Welding by Andrzej Sluzalec Technical University of Czestochowa. Poland ~ Springer A C.I.P. Catalogue record for
More informationMaterials Research and Engineering Edited by B. llschner and N. 1. Grant
Materials Research and Engineering Edited by B. llschner and N. 1. Grant Ismail C. Noyan Jerome B. Cohen Residual Stress Measurement by Diffraction and Interpretation With 160 Figures and 31 Tables Springer
More informationMohammad Aslam Khan Khalil (Ed.) Atmospheric Methane
Mohammad Aslam Khan Khalil (Ed.) Atmospheric Methane Springer-Verlag Berlin Heidelberg GmbH Mohammad Aslam Khan Khalil (Ed.) Atmospheric Methane Its Role in the Global Environment With 61 Figures and 49
More informationDIRECT -CONTACT HEAT TRANSFER
DIRECT -CONTACT HEAT TRANSFER DIRECT -CONTACT HEAT TRANSFER Edited by Frank Kreith Solar Energy Research Institute Golden, Colorado and University of Colorado, Boulder R. F. Boehm University of Utah Salt
More informationLecture Notes in Energy 5
Lecture Notes in Energy 5 For further volumes: http://www.springer.com/series/8874 . Hortensia Amaris Monica Alonso Carlos Alvarez Ortega Reactive Power Management of Power Networks with Wind Generation
More informationElementary Materials Science
Elementary Materials Science William F. Hosford ASM International Materials Park, Ohio 44073-0002 www.asminternational.org Copyright 2013 by ASM International All rights reserved No part of this book may
More informationRECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS
RECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS Recent Advances in Structural Joints and Repairs for Composite Materials Edited by LIYONGTONG School of Aerospace, Mechanical and
More informationMeta-heuristic Algorithms for Optimal Design of Real-Size Structures
Meta-heuristic Algorithms for Optimal Design of Real-Size Structures Ali Kaveh Majid Ilchi Ghazaan Meta-heuristic Algorithms for Optimal Design of Real-Size Structures 123 Ali Kaveh Department of Civil
More informationFamilienunternehmen und KMU
Familienunternehmen und KMU Series editor A. Hack, Bern, Switzerland A. Calabrò, Witten, Germany T. Zellweger, St. Gallen, Switzerland F.W. Kellermanns, Charlotte, USA H. Frank, Wien, Austria Both Family
More informationEngineering Materials and Processes. Series editor Brian Derby, Manchester, UK
Engineering Materials and Processes Series editor Brian Derby, Manchester, UK More information about this series at http://www.springer.com/series/4604 Rasheedat Modupe Mahamood Laser Metal Deposition
More informationDeformation Compatibility Control for Engineering Structures
Deformation Compatibility Control for Engineering Structures Hanhua Zhu Zhihui Zhou Mengchong Chen Jianliang Deng Deformation Compatibility Control for Engineering Structures Methods and Applications 123
More informationCurrent Topics in Quantitative Finance
Current Topics in Quantitative Finance Contributions to Management Science Harald DyckhofflUte Finke Cutting and Packing in Production and Distribution 1992. ISBN 3-7908-0630-7 Richard Flavell (Ed.) Modelling
More informationElectric Energy Systems and Engineering Series. Editors: 1. G. Kassakian D. H. Naunin
r n r n ~ r n ~ Electric Energy Systems and Engineering Series Editors: 1. G. Kassakian D. H. Naunin E. Handschin. A. Petroianu Energy Management Systems Operation and Control of Electric Energy Transmission
More informationThe University of Jordan School of Engineering Chemical Engineering Department
The University of Jordan School of Engineering Chemical Engineering Department 0905351 Engineering Materials Science Second Semester 2016/2017 Course Catalog 3 Credit hours.all engineering structures and
More informationCitation for published version (APA): Widjaja, A. (2007). Discrete dislocation modelling of Nano- and Micro-indentation s.n.
University of Groningen Discrete dislocation modelling of Nano- and Micro-indentation Widjaja, Andreas IMPORAN NOE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite
More informationFATIGUE AS A DESIGN CRITERION
FATIGUE AS A DESIGN CRITERION FATIGUE AS A DESIGN CRITERION Terance V. Duggan and James Byrne Department of Mechanical Engineering and Naval Architecture, Portsmouth Polytechnic Terance V. Duggan and James
More informationLecture Notes in Management and Industrial Engineering
Lecture Notes in Management and Industrial Engineering Volume 1 Series Editor: Adolfo López-Paredes Valladolid, Spain This bookseries provides a means for the dissemination of current theoretical and applied
More informationModule #0. Introduction. READING LIST DIETER: Ch. 1, pp. 1-6
Module #0 Introduction READING LIST DIETER: Ch. 1, pp. 1-6 Introduction Components used in engineering structures usually need to bear mechanical loads. Engineers are mainly interested in design rules
More informationFracture micro mechanics of polymer materials
Fracture micro mechanics of polymer materials Series on Fatigue and Fracture VOLUME I S. Kocanda - Fatigue failure of metals VOLUME II V. S. Kuksenko and V. P. Tamuzs - Fracture micromechanics of polymer
More informationStructural Masonry. Arnold W. Hendry BSc, PhD, DSc, FleE
STRUCTURAL MASONRY Other titles of interest to Civil Engineers An Introduction to Engineering Fluid Mechanics J. A. Fox Polymer Materials: An Introduction for Technologists and Scientists Christopher Hall
More informationTexts and Monographs in Symbolic Computation. A Series of the Research Institute for Symbolic Computation, Johannes-Kepler-University, Linz, Austria
Texts and Monographs in Symbolic Computation A Series of the Research Institute for Symbolic Computation, Johannes-Kepler-University, Linz, Austria Edited by B. Buchberger and G. E. Collins A. Miola and
More informationMitsuru Kodama. Boundary Management. Developing Business Architectures for Innovation
Boundary Management Mitsuru Kodama Boundary Management Developing Business Architectures for Innovation 123 Mitsuru Kodama, Ph.D. Professor of Information and Management College of Commerce and Graduate
More informationIntroduction To Fatigue In Metals And Composites By R.L. Carlson
Introduction To Fatigue In Metals And Composites By R.L. Carlson If you are searched for the ebook by R.L. Carlson Introduction to Fatigue in Metals and Composites in pdf format, then you have come on
More informationA TEXT-BOOK OF METALLURGY
A TEXT-BOOK OF METALLURGY A TEXT-BOOK OF METALLURGY BY A. R. BAILEY, M.Sc., Ph.D., D.I.C., A.I.M. ROYAL SCHOOL OF MINES, IMPERIAL COLLEGE OF SCIENCE AND TECHNOLOGY Second Edition Macmillan Education 1967
More informationPublic Administration, Governance and Globalization
Public Administration, Governance and Globalization Volume 16 Series Editor Ali Farazmand Florida Atlantic University Fort Lauderdale Florida USA Public Administration, Governance and Globalization Ali
More informationPrecision Injection Molding
Precision Injection Molding Jehuda Greener, Reinhold Wimberger-Friedl Process, Materials and Applications ISBN 3-446-21670-7 Weitere Informationen oder Bestellungen unter http://www.hanser.de/3-446-21670-7
More informationHans Berns Werner Theisen. Ferrous Materials. Steel and Cast Iron. Translated by Gillian Scheibelein, B.Sc. (Hons.)
Ferrous Materials Hans Berns Werner Theisen Ferrous Materials Steel and Cast Iron Translated by Gillian Scheibelein, B.Sc. (Hons.) 123 Professor em. Dr.-Ing. Hans Berns Professor Dr.-Ing. Werner Theisen
More informationAdvanced High-Strength Steels
Advanced High-Strength Steels Science, Technology, and Applications Mahmoud Y. Demeri ASM International Materials Park, Ohio 44073-0002 Copyright 2013 by ASM International All rights reserved No part of
More informationHigh-Chromium Ferritic and Martensitic Steels for Nuclear Applications
High-Chromium Ferritic and Martensitic Steels for Nuclear Applications Ronald L. Klueh and Donald R. Harries ASTM Stock Number: MONO3 ASTM 100 Barr Harbor Drive P.O. Box C700 West Conshohocken, PA 19428-2959
More informationHandbook of Media Branding
Handbook of Media Branding ThiS is a FM Blank Page Gabriele Siegert Kati F orster Sylvia M. Chan-Olmsted Mart Ots Editors Handbook of Media Branding Editors Gabriele Siegert University of Zurich IPMZ Institute
More informationMaterials Science and Engineering: An Introduction
Materials Science and Engineering: An Introduction Callister, William D. ISBN-13: 9780470419977 Table of Contents List of Symbols. 1 Introduction. 1.1 Historical Perspective. 1.2 Materials Science and
More informationModeling Fracture and Failure with Abaqus R2016
Modeling Fracture and Failure with Abaqus R2016 About this Course Course objectives Upon completion of this course you will be able to: Use proper modeling techniques for capturing crack-tip singularities
More informationFiber Reinforced Concrete (FRC)
Progress in Fiber Reinforced Concrete (FRC) Concrete is relatively brittle, and its tensile strength is typically only about one tenths of its compressive strength. Regular concrete is therefore normally
More informationComputational Materials Design. Tomi Suhonen, Anssi Laukkanen, Matti Lindroos, Tom Andersson, Tatu Pinomaa, et al. VTT Materials & Manufacturing
Computational Materials Design Tomi Suhonen, Anssi Laukkanen, Matti Lindroos, Tom Andersson, Tatu Pinomaa, et al. VTT Materials & Manufacturing Contents Click to edit Master title style Computational materials
More informationHigh Temperature and Environmental Effects on Polymeric Composites
STP 1174 High Temperature and Environmental Effects on Polymeric Composites Charles E. Harris and Thomas S. Gates, editors ASTM Publication Code Number (PCN) 04-011740-33 ASTM 1916 Race Street Philadelphia,
More informationSIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS
SIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS Materials for Engineers and Technicians A comprehensive yet accessible introduction to materials engineering which provides
More informationEngineering Materials
Engineering Materials Springer-Verlag Berlin Heidelberg GmbH Valentin G. Gavriljuk. Hans Berns High Nitrogen Steels Structure, Properties, Manufacture, Applications With 199 Figures, Springer Prof. Dr.
More informationCOMPARISON OF EXPERIMENT AND THEORY FOR CRACK TIP FIELDS IN DUCTILE SINGLE CRYSTALS
Oral/Poster Reference: ICF100225OR COMPRISON OF EXPERIMENT N THEORY FOR CRCK TIP FIELS IN UCTILE SINGLE CRYSTLS W. C. Crone and W. J. rugan epartment of Engineering Physics University of Wisconsin Madison
More informationTree and Forest Measurement
Tree and Forest Measurement P.W. West Tree and Forest Measurement 2 nd Edition With 33 Figures and 11 Tables P.W. West School of Environmental Science and Management Southern Cross University Lismore,
More informationMICROINDENTATION TECHNIQUES IN MATERIALS SCIENCE AND ENGINEERING
MICROINDENTATION TECHNIQUES IN MATERIALS SCIENCE AND ENGINEERING A symposium sponsored by ASTM Committee E-4 on Metallograpliy and by the International Metallographic Society Philadelphia, PA, 15-18 July
More informationPME - Mechanical Propieties of Materials
Coordinating unit: 295 - EEBE - Barcelona East School of Engineering Teaching unit: 702 - CMEM - Department of Materials Science and Metallurgy Academic year: Degree: 2017 BACHELOR'S DEGREE IN MATERIALS
More informationSpringer Series in Wood Science
Springer Series in Wood Science Editor: T. E. Timell Martin H. Zimmermann Xylem Structure and the Ascent of Sap (1983) John F. Siau Transport Processes in Wood (1984) John F. Siau 1Iansport Processes inwood
More informationManagement Accounting
Management Accounting MANAGEMENT ACCOUNTING A Review of Contemporary Developments Second Edition Robert W. Sea pens ~ MACMILLAN Robert W. Scapens 1985, 1991 All rights reserved. No reproduction, copy or
More informationEngineering. Composiies. CRC Press. Taylor & Francis Croup. Boca Raton London New York. CRC Press is an imprint of the
Engineering Design with Polymers and Composiies Second Edition lames G. Gerdeen, PhD, PE Ronald A. L. Rorrer, PhD, PE CRC Press Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint
More informationSoftware Product Management and Pricing
Software Product Management and Pricing These two seasoned practitioners have masterfully distilled the essence of the software business and the art and craft of the increasingly important and challenging
More informationFibre Science and Technology
Fibre Science and Technology Soviet Advanced Composites Technology Series Series editors: J. N. Fridlyander, Russian Academy of Sciences, Moscow, Russia I. H. Marshall, University of Paisley, Paisley,
More informationModelling and Simulation
MATERIALS CENTER LEOBEN FORSCHUNG GMBH Modelling and Simulation EXPERTISE & RELIABILITY MATERIALS CENTER LEOBEN MODELLING AND SIMULATION Modelling and Simulation Our expertise is your benefit The Materials
More informationPolymer Composites for Civil and Structural Engineering
Polymer Composites for Civil and Structural Engineering Polymer Composites for Civil and Structural Engineering by L. HOLLAWAY Professor Composite Structures Research Unit Department of Civil Engineering
More informationThe right choice of steel according to the Eurocode
The right choice of steel according to the Eurocode Oliver Hechler 1, Georges Axmann & Boris Donnay 2 Keywords: steel, production, steel grade, material properties, ductility, toughness, weldability. Abstract:
More informationFundamental Structural Analysis
Fundamental Structural Analysis w. J. Spencer Fundamental Structural Analysis Springer Science+Business Media, LLC W. J. Spencer 1988 Originally published by Springer-Verlag New York Inc. in 1998 Softcover
More informationInstitute of Mechanics and Fluid Dynamics Research Group Solid Mechanics
Institute of Mechanics and Fluid Dynamics Research Group Solid Mechanics Prof.Dr.rer.nat.habil. Meinhard Kuna Main research topics Fracture mechanical stress analysis and safety assessment of structural
More informationHEAT PUMP FUNDAMENTALS
HEAT PUMP FUNDAMENTALS NATO ADVANCED STUDY INSTITUTES SERIES Proceedings of the Advanced Study Institute Programme, which aims at the dissemination of advanced knowledge and the formation of contacts among
More informationSustainable Water Resources Planning and Management Under Climate Change
Sustainable Water Resources Planning and Management Under Climate Change Elpida Kolokytha Satoru Oishi Editors Sustainable Water Resources Planning and Management Under Climate Change 123 Editors Elpida
More informationSAP Excellence. Series editors: Prof. Dr. Dr. h.c. Peter Mertens, Universitat Erlangen-Niirnberg. Dr. Peter Zen eke, SAP AG, Walldorf
SAP Excellence Series editors: Prof. Dr. Dr. h.c. Peter Mertens, Universitat Erlangen-Niirnberg Dr. Peter Zen eke, SAP AG, Walldorf Springer-Verlag Berlin Heidelberg GmbH Hans-J iirgen Appelrath Jorg Ritter
More informationMICROMAGNETISM AND THE MICROSTRUCTURE OF FERROMAGNETIC SOLIDS
MICROMAGNETISM AND THE MICROSTRUCTURE OF FERROMAGNETIC SOLIDS HELMUT KRONMULLER MANFRED FÄHNLE Max-Planck-lnstitut fiir Metallforschung, Stuttgart, Germany CAMBRIDGE UNIVERSITY PRESS Acknowledgements page
More informationMechanical Behaviour Of Materials Volume Ii Fracture Mechanics And Damage Solid Mechanics And Its Applications
Mechanical Behaviour Of Materials Volume Ii Fracture Mechanics And Damage Solid Mechanics And Its We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks
More informationLeading with Emotional Intelligence
Leading with Emotional Intelligence Malcolm Higgs Victor Dulewicz Leading with Emotional Intelligence Effective Change Implementation in Today s Complex Context Malcolm Higgs Southampton Business School
More informationThe Economics of Twoway Interconnection
FORSCHUNGSERGEBNISSE DER WIRTSCHAFTSUNIVERSITÄT WIEN Ulrich Berger The Economics of Twoway Interconnection FORSCHUNGSERGEBNISSE DER WIRTSCHAFTSUNIVERSITÄT WIEN Ulrich Berger The Economics of Two-way Interconnection
More informationWEDNESDAY SEPTEMBER 20, 2017
WEDNESDAY SEPTEMBER 20, 2017 Session Title: Multiscalle modeling and connecting to continuum level descriptions Chairperson: Harmandaris-Goddin 11.20 Atomistically informed full-field simulation of tempered
More informationStrategy and Organization of Corporate Banking
Strategy and Organization of Corporate Banking Giacomo De Laurentis (Editor) Strategy and Organization of Corporate Banking With 12 Figures and 49 Tables 4y Springer Professor Giacomo De Laurentis Institute
More informationLight and Light Sources
Light and Light Sources P. Flesch Light and Light Sources High-Intensity Discharge Lamps With 226 Figures, 5 in Color, and 4 Tables 123 PD Dr.-Ing. Peter Flesch OSRAM GmbH Nonnendammallee 44-61 13629 Berlin
More informationHigh-performance SiC-polycrystalline fiber with smooth surface
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Type of the Paper (Article) High-performance SiC-polycrystalline fiber with smooth
More informationX-Ray Diffraction. A Practical Approach
X-Ray Diffraction A Practical Approach X-Ray Diffraction A Practical Approach c. Suryanarayana Colorado School of Mines Golden, Colorado and M. Grant Norton Washington State University Pullman, Washington
More informationEdited by Konrad Herrmann
Edited by Konrad Herrmann ASM International Materials Park, Ohio 44073-0002 Copyright 2011 by ASM International All rights reserved No part of this book may be reproduced, stored in a retrieval system,
More informationTHEORY AND ANALYSIS OF LAMINATED COMPOSITE AND FUNCTINALLY GRADED BEAMS, PLATES, AND SHELLS
THEORY AND ANALYSIS OF LAMINATED COMPOSITE AND FUNCTINALLY GRADED BEAMS, PLATES, AND SHELLS J. N. Reddy e-mail: jnreddy@tamu.edu Texas A&M University College Station, TX 77843-3123 USA * This document
More informationRegional Approaches to Water Pollution in the Environment
Regional Approaches to Water Pollution in the Environment NATO ASI Series Advanced Science Institutes Series A Series presenting the results of activities sponsored by the NA TO Science Committee, which
More informationExplosions. w. Bartknecht. Course Prevention Protection. With 259 Figures, Some in Color and 34 Tables
w. Bartknecht Explosions Course Prevention Protection With 259 Figures, Some in Color and 34 Tables Translation from the German by H. Burg and T. Almond Springer-Verlag Berlin Heidelberg New York 1981
More informationJob Demands in a Changing World of Work
Job Demands in a Changing World of Work A word cloud of the contents of the book Christian Korunka Bettina Kubicek Editors Job Demands in a Changing World of Work Impact on Workers Health and Performance
More informationManganese in Powder Metallurgy Steels
Manganese in Powder Metallurgy Steels Andrej Šalak Marcela Selecká Manganese in Powder Metallurgy Steels 123 Andrej Šalak Institute of Materials Research Slovak Academy of Sciences Kosice Slovakia Marcela
More informationMatrix-Based Product Design and Change Management
Matrix-Based Product Design and Change Management Dunbing Tang Leilei Yin Inayat Ullah Matrix-Based Product Design and Change Management 123 Dunbing Tang College of Mechanical and Electrical Engineering
More informationControlling. Concepts of Management Control, Controllership, and Ratios
Controlling Concepts of Management Control, Controllership, and Ratios Springer Berlin Heidelberg New York Barcelona Budapest Hong Kong London Milan Paris Santa Clara Singapore Tokyo Thomas Reichmann Controlling
More informationMachining of Polymer Composites
Machining of Polymer Composites Jamal Y. Sheikh-Ahmad Machining of Polymer Composites 123 Jamal Y. Sheikh-Ahmad The Petroleum Institute Department of Mechanical Engineering Abu Dhabi United Arab Emirates
More informationSpringer-Verlag Berlin Heidelberg GmbH
Reverse Logistics Springer-Verlag Berlin Heidelberg GmbH Rommert Dekker Moritz Fleischmann Karl Inderfurth Luk N. Van Wassenhove Editors REVERSE LOGISTICS Quantitative Models for Closed-Loop Supply Chains
More informationMultiscale modelling of the forming process of thermoplastic fibre reinforced composites (TPFRCs)
Multiscale modelling of the forming process of thermoplastic fibre reinforced composites (TPFRCs) TPFRCs are fundamentally well suited for the application in lightweight (vehicle) construction. Project
More informationNew Methods for the. Consolidation of Metal Powders
New Methods for the Consolidation of Metal Powders PERSPECTIVES IN POWDER METALLURGY Fundamentals, Methods, and Applications In Preparation Volume 2 Vibratory Compacting-Principles and Methods Volume 3
More informationTopics in Mining, Metallurgy and Materials Engineering. Series editor Carlos P. Bergmann, Porto Alegre, Brazil
Topics in Mining, Metallurgy and Materials Engineering Series editor Carlos P. Bergmann, Porto Alegre, Brazil Topics in Mining, Metallurgy and Materials Engineering welcomes manuscripts in these three
More informationFOREST POLICY ANALYSIS
FOREST POLICY ANALYSIS FOREST POLICY ANALYSIS by MAX KROTT Institute for Forest Policy and Nature Conservation, Göttingen, Germany Translated by Renée von Paschen EUROPEAN FOREST INSTITUTE A C.I.P. Catalogue
More informationManagement for Professionals
Management for Professionals For further volumes: http://www.springer.com/series/10101 ThiS is a FM Blank Page Erik Jannesson Fredrik Nilsson Birger Rapp Editors Strategy, Control and Competitive Advantage
More informationSimulation Strategies to Reduce Recidivism
Simulation Strategies to Reduce Recidivism Faye S. Taxman April Pattavina Editors Simulation Strategies to Reduce Recidivism Risk Need Responsivity (RNR) Modeling for the Criminal Justice System Editors
More informationReview of Biomedical Image Processing
BOOK REVIEW Open Access Review of Biomedical Image Processing Edward J Ciaccio Correspondence: ciaccio@columbia. edu Department of Medicine, Columbia University, New York, USA Abstract This article is
More informationDuctile Fiber Reinforced Panels for Seismic Retrofit
9 Ductile Fiber Reinforced Panels for Seismic Retrofit Keith E. Kesner School of Civil & Environmental Engineering, Cornell University Research Supervisor: Sarah L. Billington, Assistant Professor Summary
More informationAircraft Structural Integrity
Unit 89: Aircraft Structural Integrity Unit code: J/6017248 QCF level: 5 Credit value: 15 Aim This unit aims to develop the understanding and techniques necessary to ensure that aircraft are manufactured
More informationEnterprise Risk Management Models
Enterprise Risk Management Models David L. Olson Desheng Wu Enterprise Risk Management Models 123 Professor David L. Olson University of Nebraska Department of Management Lincoln, NE 68588-0491 USA dolson3@unl.edu
More informationCENTRE OF MATERIALS SCIENCE. Materials Science and Engineering. Department of Physical, Mathematical and Technical Sciences.
CENTRE OF MATERIALS SCIENCE Materials Science and Engineering Department of Physical, Mathematical and Technical Sciences Applied Mechanics PROGRAMME Subject - matter : MECHANICS OF MATERIALS Degree: Master
More informationA Combined Discrete-dislocation/Scaledependent Crystal Plasticity Analysis of Deformation and Fracture in Nanomaterials. Presented by: Derek Columbus
MS Thesis Defense A Combined Discrete-dislocation/Scaledependent Crystal Plasticity Analysis of Deformation and Fracture in Nanomaterials Presented by: Derek Columbus Advisor: Dr. Mica Grujicic Department
More informationLogistics Systems Analysis
Logistics Systems Analysis Springer-Verlag Berlin Heidelberg GmbH Carlos F. Daganzo Logistics Systems Analysis Second Revised and Enlarged Edition With 52 Figures, Springer Prof. Carlos F. Daganzo University
More informationLecture Notes in Economics and Mathematical Systems
Lecture Notes in Economics and Mathematical Systems 420 Founding Editors: M. Beckmann H. P. Kiinzi Editorial Board: H. Albach, M. Beckmann, G. Feichtinger, W. Hildenbrand, W. Krelle H. P. Kiinzi, K. Ritter,
More informationTECHNOLOGY, lnnovation and POLICY 7. Series of the Fraunhofer Institute for Systems and Innovation Research (ISQ
TECHNOLOGY, lnnovation and POLICY 7 Series of the Fraunhofer Institute for Systems and Innovation Research (ISQ U l r i k e B r o s s A n n a m á r i a I n z e l t T h o m a s R e i ß Bio-Technology Audit
More informationHigh Performance Materials in Aerospace
High Performance Materials in Aerospace High Performance Materials in Aerospace Edited by Harvey M. Flower Professor of Materials Science Imperial College of Science, Technology and Medicine London, UK
More informationCustomer Relationship Management
Customer Relationship Management Springer-Verlag Berlin Heidelberg GmbH Federico Rajola Customer Relationship Management Organizational and Technological Perspectives With 37 Figures and 13 Tables Springer
More informationChanging Innovation in the Pharmaceutical Industry. Globalization and New Ways of Drug Development
Changing Innovation in the Pharmaceutical Industry Globalization and New Ways of Drug Development Springer-Verlag Berlin Heidelberg GmbH Andre Jungmittag Guido Reger Thomas Reiss (Eds.) Changing Innovation
More information