Araldite LY 5052 Resin / Aradur 5052 Hardener

Transcription

1 Araldite LY 5052 Resin / Aradur 5052 Hardener Product Description Araldite LY 5052 is a low-viscosity epoxy resin that is used with Aradur 5052, a mixture of polyamines, to form a cold curing epoxy system. This system has many applications in aerospace and industrial composites, tooling, aircraft repair. Features Low viscosity, easy impregnation of reinforcement materials. Long pot life (2 hours for 100 ml at ambient temperature) Ample processing time allows production of large objects Ambient temperature curable with high temperature resistance (glass transition temperature) after post-cure at 100 to 120 C Excellent mechanical and dynamic properties after ambient cure with potential for even higher properties after post-cure at elevated temperatures Laminates also show outstanding mechanical and dynamic properties. Qualified by the Luftfahrtbundesamt (German Aircraft Authority) for the production of gliders Typical Properties* Property Araldite LY 5052 Aradur 5052 Test Method Appearance Slightly yellow Colorless liquid Visual liquid Color 2 4 Gardner, ISO C, g/cm ISO C, cp ISO Flash Point, C ISO 2719 *Typical properties are based on Huntsman s test methods. Copies are available upon request. 06 / 2015 Araldite LY 5052 / Aradur 5052 Page 1

2 Processing Mix Ratio Product Parts by weight Parts by volume Araldite LY Aradur We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system. The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process. When processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers. Parameter Value Test Method Initial Mix Viscosity, F ISO Viscosity build up, min to F to F to F to F to F to F Pot life, F Gel time, F C, h Start: End: 7-8 Typical cure cycles 3 1 day 23 C + 15 h 50 C or 1 day 23 C + 4 h 100 C 1 A long pot life allows for ample time to produce even large objects. ISO Tecam, 100 ml, 65 % RH Hot Plate Thin layers mm 06 / 2015 Araldite LY 5052 / Aradur 5052 Page 2

3 2 It must be noted that the values shown are for small amounts of pure resin/hardener mix. In composite structures the gel time can differ significantly from the given values depending on the fibre content and the laminate thickness. 3 The optimum cure cycle has to be determined case by case, depending on the processing and the economic requirements. Typical Physical Properties Unless otherwise stated, the data were determined with typical production batches using standard test methods. They are typical values only, and do not constitute a product specification. Properties of cured, neat Formulation Property Value Test Method Glass transition temperature, 1 T g, F 2 days 78 F 8 days 78 F 4 month 73 F 1 day 73 F + 10 h 104 F 1 day 73 F + 20 h 104 F 1 day 73 F + 10 h 122 F 1 day 73 F + 1 day 73 F + 10 h 140 F 1 day 73 F + 15 h 140 F 1 day 73 F + 2 h 176 F 1 day 73 F + 1 day 73 F + 1 h 194 F 1 day 73 F + 4 h 194 F 1 day 73 F + 1 h 212 F 1 day 73 F + 4 h 212 F 4 months 73 F + 4 h 266 F* T g onset T g IEC 1006, 10 K/min Flexural strength, kpsi, Elongation at flexural strength, % Ultimate flexural strength, kpsi Ultimate flexural elongation, % / 2015 Araldite LY 5052 / Aradur 5052 Page 3

4 Flexural modulus, kpsi Tensile strength, kpsi Elongation at tensile strength, % Ultimate tensile strength, kpsi Ultimate tensile elongation, % Tensile modulus, kpsi Fracture properties / Bend Notch Test Fracture toughness K IC, psi in 1/2 Fracture energy G IC, in lb/in Water absorption, immersion, % wt. 4 days H 2 O 23 C 10 days H 2 O 23 C 30 min H 2 O 100 C 60 min H 2 O 100 C Coefficient of linear thermal expansion, 10-6 / F mean from C (Cure 7 d RT) mean from C (Cure ) mean from C (Cure ) Poisson s Ratio ISO ISO 62 DIN The maximum attainable glass - transition temperature for this system is in the range of 266 F *Even if post-cured at elevated temperature after a prolonged cure at ambient, a good increase of the glass transition temperature is obtained with this cure. 06 / 2015 Araldite LY 5052 / Aradur 5052 Page 4

5 Properties of cured, Reinforced Formulation Property Value Test Method Flexural strength, 1 kpsi Elongation at flexural strength, % Ultimate flexural strength, kpsi Ultimate flexural elongation, % Flexural modulus, kpsi Tensile strength, 1 kpsi Ultimate tensile elongation, % Tensile modulus, kpsi Interlaminar shear strength, 2 kpsi ( ) ( 8 h 80 C) After 1 h in H 2 O 100 C ( After 1 h in H 2 O 100 C ( 8 h 80 C) ASTM D Samples for flexural and tensile tests: 16 layers (4 mm) E-glass fabric 1:1, g/m 2 ; Fiber volume content: 45-46%; 10 h at 176 F. 2 Short beam interlaminar shear strength samples: E-glass unidirectional specimen, thickness t = 3.2 mm; Fiber volume content: 60%. Storage Araldite LY 5052 Resin should be stored in a dry place, in the sealed original container, away from heat and humidity, at temperatures between 2 C and 40 C (35.6 F and 104 F). Under these storage conditions, the shelf life is 3 years (from date of manufacture). The product should not be exposed to direct sunlight. Aradur 5052 Hardener should be stored in a dry place, in the sealed original container, away from heat and humidity, at temperatures between 2 C and 40 C (35.6 F and 104 F). Under these storage conditions, the shelf life is 3 years (from date of manufacture). The product should not be exposed to direct sunlight. 06 / 2015 Araldite LY 5052 / Aradur 5052 Page 5

6 Precautionary Statement Huntsman Advanced Materials Americas LLC maintains up-to-date Safety Data Sheets (SDS) on all of its products. These sheets contain pertinent information that you may need to protect your employees and customers against any known health or safety hazards associated with our products. Users should review the latest MSDS to determine possible health hazards and appropriate precautions to implement prior to using this material. First Aid! Refer to SDS as mentioned above. KEEP OUT OF REACH OF CHILDREN FOR PROFESSIONAL AND INDUSTRIAL USE ONLY 06 / 2015 Araldite LY 5052 / Aradur 5052 Page 6

7 Important Legal Notice Sales of the product described herein ( Product ) are subject to the general terms and conditions of sale of either Huntsman Advanced Materials LLC, or its appropriate affiliate including without limitation Huntsman Advanced Materials (Europe) BVBA, Huntsman Advanced Materials Americas Inc., or Huntsman Advanced Materials (Hong Kong) Ltd. ( Huntsman ). The following supercedes Buyer s documents. Huntsman warrants that at the time and place of delivery all Products sold to Buyer shall conform to the specifications provided to Buyer by Huntsman. While the information and recommendations included in this publication are, to the best of Huntsman s knowledge, accurate as of the date of publication, NOTHING CONTAINED HEREIN (EXCEPT AS SET FORTH ABOVE REGARDING CONFORMANCE WITH SPECIFICATIONS PROVIDED TO BUYER BY HUNTSMAN) IS TO BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND THE BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. No statements or recommendations made herein are to be construed as a representation about the suitability of any Product for the particular application of Buyer or user or as an inducement to infringe any patent or other intellectual property right. Buyer is responsible to determine the applicability of such information and recommendations and the suitability of any Product for its own particular purpose, and to ensure that its intended use of the Product does not infringe any intellectual property rights. The Product may be or become hazardous. The Buyer should obtain Material Safety Data Sheets and Technical Data Sheets from Huntsman containing detailed information on Product hazards and toxicity, together with proper shipping, handling and storage procedures for the Product, and should comply with all applicable governmental laws, regulations and standards relating to the handling, use, storage, distribution and disposal of, and exposure to the Product. Buyer shall also take all steps necessary to adequately inform, warn and familiarize its employees, agents, direct and indirect customers and contractors who may handle or be exposed to the Product of all hazards pertaining to and proper procedures for safe handling, use, storage, transportation and disposal of and exposure to the Product, and the containers or equipment in which the Product may be handled, shipped or stored. [Product Brand] is a registered trademark of Huntsman LLC or an affiliate thereof in one or more, but not all countries Huntsman Advanced Materials Inc. Main Offices: Huntsman Corporation Woodloch Forest Dr The Woodlands, TX Huntsman Advanced Technology Center 8600 Gosling Rd. The Woodlands, TX / 2015 Araldite LY 5052 / Aradur 5052 Page 7