Diescolith SOL-Silikat
|
|
- Hilary Morton
- 6 years ago
- Views:
Transcription
1 Highly diffusible SOL silicate paint according to DIN Silica sol silicate base Tribrid formula Variety of applications Highly weather-resistant Highly water-repellent Highly diffusible UV-light-resistant Resistant to acidic environment Non-film-forming Light-resistant pigment Good coverage Mineral matte Low stress Easy to use Solvent-free Alkaline, therefore fungus- and algaeresistant Application Matte, single-component facade paint based on silica sol silicate. Fulfils the VOB, DIN para Diescolith SOL-Silicate () gives low stress, non-film-forming silicate coats with very good adhesive properties and low soiling tendency. Suitable substrates include matte, solid, adhesive old paint and textured plasters based on silicate, dispersion and silicon resin, lime sand brickworks, old and new plasters as per DIN EN Not suitable for plasto-elastic coats, varnishes and wood-based materials. Diescolith SOL- Silicate () with the silica sol tribrid formula offers an adhesive behaviour that is excellent for silicate paints with extremely good weather- and UV-light-resistance as well as very good soiling insensitivity. This achieves permanent adhesion even on matte dispersion and silicon resin coats. Technical data Binding agent base Potash water glass Acting agents Silica sol with the special tribrid formula. The organic content is below 5 mass % and corresponds to the DIN para Pigment base Titanium dioxide
2 Rating in accordance with DIN EN 1062: Water vapour permeability Class V 1 high, corresponds to sd-value 0.01 m Porosity (W-value) Class W 3 low, corresponds to w-value 0.09 kg/m² x h 0.5 Colour White Tinting Colour fastness as per BFS datasheet no. 26: In-plant tinting: Class B / Group 1 Diessner MIX: Class B / Group 1 Can be tinted in the factory or with commercially available silicate-based full shades and tints. Colour bases are available for tinting using the Diessner MIX system. Check colour accuracy before use. Please refer to BFS datasheet no. 25. Tinting can result in deviations in the technical data and the offered properties. Thickness Gloss level at 85 Approx g/ml Approx. 2.8 dull matte Viscosity at 20 C [Pa*s]: Approx. 55 ph value in accordance with DIN : Approx Container size VOC content Storage 12.5 litre container Class c type wb, VOV limit from 2010 = 40 g/l, max. VOC value < 40 g/l Store in a cool, frost-free environment. Keep any opened containers tightly closed and use as soon as possible. Unopened containers can be kept for 12 months. See the stamp on the container for the date of manufacture. Coverage Depending on the method of application on smooth substrates approx ml/m² per application. Apply a test coat to determine any potential differences relating to your project. Product code Colours and paint M-SK 01 Hazard identification Not applicable
3 Declaration of ingredients Special notes Disposal Potash water glass, silica sol, polymer dispersion, titanium dioxide, calcium carbonate, aluminium silicate, water, film forming aids, additives. Keep out of reach of children. During use, protect the skin and eyes from paint droplets. In case of contact with skin, rinse thoroughly with water. In case of contact with the eyes, rinse thoroughly with water immediately and consult a doctor. Do not allow the paint to enter drainage systems, waterways or soil. Carefully cover all surfaces that are not to be coated, especially glass, clinkers, ceramics, natural stone, metal and paintworks. Rinse all types of paint sprayers immediately with water. For more information, see EC safety datasheet. Only recycle completely empty containers. Dispose of any liquid material residue at an authorised collection point that handles old paint/varnish. Any dried out material residue can be disposed of as hardened paint or as domestic waste. Waste key no according to the AVV waste directory regulation. Handling guidelines Handling: Airless application: Mix Diescolith SOL-Silicate () thoroughly before use. For absorbent substrates, we recommend thinning down as follows: Thin down the first coat with 5-10% Diescolith Silicate Special Fixative (Diescolith Silikat Spezial Fixativ). Thin down the second coat with max. 5% Diescolith Silicate Special Fixative (Diescolith Silikat Spezial Fixativ). Apply and spread the coats evenly wet on wet. If necessary, thin down and sift the material before the airless application or ask for an Airfix factory adjustment before ordering the material. Nozzle: inch Spray pressure: bar Spray angle: 50 Method of application: Cleaning the tools/ airless equipment: With brush and roller. Can be applied with high-performance airless equipment: After the spray coating, work in and spread the material evenly onto the substrate with a paint roller. Clean with water immediately after use.
4 Minimum handling temperature Do not use if the subsurface, ambient or drying temperature is below +8 C or above +25 C. Do not use if the relative humidity is above 85%. Note: The handling period is significantly reduced at temperatures above +20 C. Do not use in direct sunlight, in strong winds and if there is a risk of rain or night frost. Do not apply onto heated substrates. Drying time Surface dry and paintable after approx. 8 hours at a temperature of +23 C and 50% relative humidity. Longer drying time at lower temperatures or higher humidity. Please note: Thin down the material only with Diescolith Silicate Special Fixative (Diescolith Silikat Spezial Fixativ). Pay attention to the sections Coating structure and the technical datasheet of Diescolith Silicate Special Fixative (Diescolith Silikat Spezial Fixativ). Refer to the VOB, Part C DIN para. when applying the coat. Do not use in direct sunlight, in strong winds and if there is a risk of rain or night frost. Do not use if the ambient, subsurface or drying temperature is below +8 C or above +25 C. Protect from any humidity during the drying period. Apply the material evenly. In order to avoid any deposits on larger areas, it is essential to apply a rapid coat wet on wet. Please refer to BFS datasheet no. 9. Not suitable for surfaces with plasto-elastic and varnish-like old coats. Not suitable for plastic and wooden surfaces or for surfaces with salt contamination. Do not mix with other coating materials. Surrounding surfaces, especially glass, ceramics, natural stone, metal and bricks should be carefully covered prior to starting any work. On high-contrast substrate, intensive colours made from the colour base 0 can have a bad coverage. We recommend applying a pastel colour, compensative, additional undercoat with the colour base 1. Changing weather conditions can lead to changes in the shades of colour during the processing and drying because of the chemical curing process. These do not pose any technical and functional shortcomings and therefore cannot lead to any complaints. We therefore always recommend processing or drying coloured silicate coats when weather conditions are stable. With tinted silicate coats that are completely dried out, mechanical strain on the surface can lead to changes in colour (so-called brushing effect or breakdown of the filler/pigment). These cannot lead to any complaints. This does not affect the weather resistance. Consistent colour accuracy cannot be guaranteed with subsurfaces that have different absorption, drying conditions or different surface textures. Furthermore, alkali compounds that are present in the subsurface or any other ingredients can affect the colour. Changes in colour can occur as a result of different weathering on the surface of the plaster. Please refer to BFS datasheets no. 25 and 26. Protect from any humidity during the drying period. Failure to comply with this may result in damage to the plaster coat in the form of peeling, premature chalking or the leaching of additives (sticky, partly shiny run-off stains).
5 Water-soluble additives can be washed out in the case of severe exposure to moisture (owing to dew, mist, rain and driving rain in particular). In unfavourable cases, these can appear as sticky, slightly shiny run-off stains (leaching of additives). Therefore, protect the silicate coat from any moisture during the drying period. As any washed out additives that can be seen are water soluble, they are generally removed by natural weathering. The technical properties of the dried plaster coat are not adversely affected by this. In the case of severe exposure to moisture (owing to dew, mist, rain and driving rain in particular) at an early stage of the drying period, insoluble binding agent components (potash water glass) can be washed out. These cannot be removed. Therefore, protect the silicate coat from any moisture during the drying period. In these cases, we recommend consulting Diessner Product Technology Department. To avoid any fungus and algae growth within a short period of time, we recommend using the silicate coat with a special FA (fungicide/algaecide) version. This FA version is subject to extra charge and should be ordered separately. Please request the technical data sheet for Diessner SOL-Silikat FA and refer to the handling information or special instructions. Substrate preparation: Substrates must be silicificating, solid, dry, free of dirt, blooming, discolouration, fungal growth, sintered layers, multi-grain layers, chalking layers and separating substances. The substrates must be tested for their suitability, adhesion and stability. Please refer to the VOB, Part C DIN para. 3, the respective BFS datasheets and the technical datasheet 008. Note This technical information is compiled to the best of our knowledge and corresponds to our state-of-the-art application technology. However, you can only obtain non-binding advice as the working method in each individual case is dependent on the condition of the structure to be coated and can only be decided on the basis of the actual surface in question. Conditional exceptions are to be taken into account on site. Liability cannot be derived from the aforementioned information. Due to the different substructure materials and the working conditions that are out of our control, we recommend conducting sufficient tests in each case to ensure the suitability of our products for the intended procedures and purposes. All previous versions cease to apply with the publication of this technical datasheet.
Technical data sheet. Diesco Silicon plus. Silicon resin façade paint. High-grade, matte silicon resin facade paint with SIO-TEC formula
High-grade, matte silicon resin facade paint with SIO-TEC formula SIO TEC formula: Formation of three-dimensionals silicon oxide meshes for coatings with low soiling tendency and high colour stability.
More informationReady-to-use structural plaster for interior use
Ready-to-use structural plaster for interior use Very easy to spread Very robust and hard-wearing surface Uniform Fibre-reinforced, low-stress Easy and flexible to handle Environmentally friendly, low-odour
More informationDiesco Multilan plus. Water dilutable weather-proof paint for exterior and interior with a wide range of applications
Water dilutable for exterior and interior with a wide range of applications High weather resistance Abrasion resistant Permanently elastic Highly adhesive Silk matte Diffusible Easy to use Fast drying
More informationTechnical data sheet. DiescoLack Surface Glaze
Thixotrope, film-forming wood glaze for long-term highly weather-resistant protection of wood coatings in exterior and interior areas Free of biocide Porous Diffusible Elastic Very high UV-protection Low-odour
More informationData Sheet 1806 Englisch
Data Sheet 1806 Englisch Silicate Interior Paint ELF 1806 Silikat-Innenfarbe ELF 1806 low emission, solvent and plasticizer free, dull matt, wet abrasion resistance class 3, suitable for allergy sufferers,
More informationData Sheet 3631 Englisch
Englisch Silicate Render KR Silikat-Putz Mineral decorative render, in scraped render structure, for exterior use Properties Decorative, easy structurable facade render silicate based with organic stabilizers
More informationProtective coating for exposed concrete
Data Sheet Edition 30/01/2009 Identification no: 01 03 03 03 001 0 000003 Protective coating for exposed concrete Construction Description Uses Characteristics / Advantages Sikagard -675 W ElastoColor
More informationTechnical Data Sheet
Permanent coating, which facilitates removal of graffiti. Agent description: KTX 07 is a unique, single component, colorlessly drying agent based on synthetic organosilicon polymers, applicable for surface
More informationSMARTSEAL MASONRY PROTECTION CREAM HYDROPHOBIC IMPREGNATION CREAM FOR BRICKWORK, STONE AND MASONRY
SMARTSEAL MASONRY PROTECTION CREAM HYDROPHOBIC IMPREGNATION CREAM FOR BRICKWORK, STONE AND MASONRY SMARTSEAL MASONRY PROTECTION CREAM - HYDROPHOBIC IMPREGNATION CREAM FOR BRICKWORK, STONE AND MASONRY Thixotropic
More informationTechnical Data Sheet StoSilco QS R
Silicone resin finishing render with wash-off resistant properties with rilled texture Characteristics Application Properties Appearance Information/notes Exterior Onto organic and, to a limited extent,
More informationFor purchasing information visit: Osmo UV Protection Oil Extra
The following Product Datasheet is provided by Osmo Wood Finishes Direct cannot be held liable for the information contained within this document. For purchasing information visit: Osmo UV Protection Oil
More informationData Sheet 200 Englisch
Data Sheet 200 Englisch Evocryl 200 Evocryl 200 100 % pure acrylate facade paint, water-dilutable, matt, with photocatalytic effect, highly weather-resistant, dirtresistant due to Evoflex technology, for
More informationTechnical Data Sheet StoSuperlit
Organic natural stone plaster Characteristics Properties Appearance Specific characteristic/ Remarks For exterior use On mineral and organic substrates, primarily in plinth areas and passages Not suitable
More informationData Sheet Eco-Smart Membrane WS M1
Water-based Acrylic WS M1 Elastomeric Waterproofing Membrane is a durable, multi-use, extremely durable acrylic coating. At an ideal wet film thickness of 10-14 mils per coat (8-10 mils dry film finish
More informationTechnical Data Sheet StoSilco R
Silicone resin finishing plaster in rilled texture Characteristics Application Properties Appearance Specific characteristic/ Remarks Technical Data For exterior use On mineral and organic substrates Not
More informationDULUX INTERIOR LUXURIOUS SILK TECHNICAL DATA SHEET Version SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS
TECHNICAL DATA SHEET Version 1 2016 SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A low odour premium quality interior mid sheen finish with supreme stain resistance. PRODUCT
More informationPRODUCT INFORMATION SABRESHIELD
PRODUCT DATA SHEET ISSUE DATE: JULY 2015 PRODUCT INFORMATION PRODUCT NAME PRODUCT DESCRIPTION SABRESHIELD A heavy-duty, fibre- reinforced, waterproof coating with unique dirt shedding technology, excellent
More informationDULUX WEATHERGUARD FINE TEXTURED
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A tough, durable exterior coating with Maxiflex that provides lasting elasticity to cover hairline
More informationBONDEX Premium Product Code Product Name Recommended for Available sizes
BONDEX Premium Product Code Product Name Recommended for Available sizes 330045 Bondex Premium All types of indoor and outdoor wood 0.75 L - 2.50 L 1 Product Description 1.1 Product Type: 1.2 Manufacturer:
More informationData sheet Armatop A - new / Page 1. Areas of application Bonding Bonding of mineral wool, polystyrene and cork external wall insulation boards.
Data sheet Armatop A - new / Page 1 Armatop A - new Bonding and reinforcing compounds for alsecco external wall systems Areas of application Bonding Bonding of mineral wool, polystyrene and cork external
More informationWhite, a range of ready-mixed colours, and colours from the Dulux Colour System
TECHNICAL DATA SHEET Version 2 2016 SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior matt finish PRODUCT USES Recommended for exterior and
More informationTechnical Data Sheet StoColor Climasan
Physiologically harmless, odour-reducing, deadmatt interior dispersion paint, wet scrub resistance 2 and hiding power 1 in accordance with EN 13300 Characteristics Area of application interior for wall
More informationTechnical Data Sheet StoDecolit K
Physiologically harmless, organic finishing plaster with stippled texture Characteristics Areas of application Properties Appearance Information/notes interior onto mineral and organic substrates onto
More informationProperty Test/Standard Description
Approved 720 1,2 720 silicone acrylic ^(ValidationDate) 1 Product description This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 C. Can be used as primer,
More informationTechnical Data Sheet Sto-Primer
Filled, pigmented, organic undercoat Characteristics Area of application interior & exterior on mineral and organic substrates for organic and silicone resin renders for modified, mineral renders for dispersion
More informationTechnical Data Sheet Rhenopox EB 06.1 Art. no.: A 5198
version: 2016/06 page 1 of 5 Rhenopox EB 06.1 (2k Epoxy Color Traffic Zone) component A Art. no.: A 5198 - Products consist of a mixture of component A = Rhenopox EB 06.1 and component B = Rhenopox EH
More informationProperty Test/Standard Description
Approved 34642;34643 1 34642 multipolymeric matrix ^(ValidationDate) 1 Product description This is a two component titanium catalyzed inorganic ceramic copolymer. It complies to the generic type Multi
More informationProtective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Other Technical Data Sheet 15261;15962;15280 1 15962 epoxy VValidationDate). 1 Product description This is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids product.
More informationROCKGRIP UNIVERSAL ACRYLIC PVA
TECHNICAL DATA SHEET Version 1 2016 FEBRUARY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Matt finish for interior use PRODUCT USES Suitable for use on primed new or previously painted
More informationTechnical Data Sheet StoColor Metallic
Coating on pure acrylate base with metallic effect Characteristics Application Properties Appearance Information/notes Exterior and interior on EWIS StoTherm Classic und StoTherm Vario with individual
More informationTechnical data sheet StoColor Climasan
Physiologically harmless, odour-reducing, deadmatt interior dispersion paint, wet scrub resistance 2 and hiding power 1 in accordance with EN 13300 Characteristics Areas of application Properties interior
More informationSATIN NON-DRIP ACRYLIC
PRODUCT DATA SHEET ISSUE DATE: FEBRUARY 2016 PRODUCT DESCRIPTION PRODUCT NAME PRODUCT DESCRIPTION SATIN NON-DRIP ACRYLIC A tough superior quality non-drip waterborne enamel with a satin sheen finish. A
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 35 C
Other Technical Data Sheet 13640;13641 1 13640 epoxy VValidationDate). 1 Product description This is a two component polyamine cured epoxy coating. It is an ultra high build, high solids abrasion resistant
More information2-part water dispersed epoxy coating
Product Data Sheet Edition 21/07/2008 Identification no: 01 08 01 01 014 0 000001 2-part water dispersed epoxy coating Construction Product Description Sikagard -Wallcoat N is a two part, coloured, water
More informationPRODUCT DATA SHEET. Sika Pyroplast Wood T with Topcoat Sika Pyroplast Wood Top T PRODUCT DESCRIPTION
PRODUCT DATA SHEET Water based fire protective coating for wood, interior use PRODUCT DESCRIPTION USES PROPERTIES TESTS Sika Pyroplast Wood T is a water borne, transparent fire protection coating which
More informationTwo component solvent-free epoxy system for creation of self-levelling floors. Gloss <4% <70% IR4
Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor S is a suitable screed that can be applied on cement-based floors which need high mechanical
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 32 C VOC-USA / VOC Hong Kong EPA Method 24
Other Technical Data Sheet 2920;2401 1 2920 epoxy VValidationDate). 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids,
More informationTECHNICAL ADVICE. PREPARATION Efflorescence in Masonry
TECHNICAL ADVICE PREPARATION What What is Efflorescence? Efflorescence is the term most commonly used to describe the deposit of crusty white mineral salts that appear on a masonry surface (concrete, render,
More informationConcrete Paint and Varnish
www.teknos.com DATA SHEET 1247 12 22.02.2017 TEKNOFLOOR AQUA 110F Concrete Paint and Varnish PAINT TYPE USAGE SPECIAL PROPERTIES TEKNOFLOOR AQUA 110F Concrete Paint is a water-based, two-pack epoxy paint.
More informationProperty Test/Standard Description STANDARD GRADE
Other Technical Data Sheet 4860;523;527;1549 1,2 523 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids,
More informationGeneral: Primarily designed for maintenance and repair. Only aluminium containing versions to be used in immersed environments.
Other Technical Data Sheet 5580;5660;6520;10760 1,2 5580 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-USA / VOC Hong Kong EPA Method 24
Other Technical Data Sheet 3140;3240;4320 1,2 3140 polyurethane VValidationDate). 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a gloss
More informationPRODUCT DATA SHEET Sikalastic -501 Roofseal Plus
PRODUCT DATA SHEET ECONOMICAL LIQUID APPLIED ROOF WATERPROOFING SOLUTION DESCRIPTION is a cold-applied, onecomponent waterborne liquid applied waterproofing membrane, highly elastic and UV resistant. USES
More informationNormadur 65 HS. Technical Data PROPERTIES AND RECOMMENDED USAGE TECHNICAL DATA
Technical Data Normadur 65 HS PROPERTIES AND RECOMMENDED USAGE Paint type: NORMADUR 65 HS is a fast drying, flexible polyurethane coating with an aliphatic isocyanate curing agent. NORMADUR 65 HS is high-solid
More informationMosaic 100gr/m 2 /layer 125gr/m 2 /layer Ceramic Tiles 100gr/m 2 /layer 125gr/m 2 /layer Cementitious high porosity. Gloss 75Α:25Β
Product Description Neopox Special is a two-component solvent-based epoxy paint suitable for use on construction, metallic & GRP surfaces that undergo significant mechanical stress and need chemical resistance.
More informationA range of popular roof shades Spruce Acrylic Roof cannot be tinted.
TECHNICAL DATA SHEET Version 1 2017 MARCH THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A quality, 100% pure acrylic paint for roofs PRODUCT USES Spruce Acrylic Roof is for application
More informationSIGMAZINC 158. Revision of September 2008 DESCRIPTION. two component moisture curing zinc (ethyl) silicate primer PRINCIPAL CHARACTERISTICS
5 pages Revision of September 2008 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationApprox. 12 m² per litre depending on surface porosity, profile. Application methods
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Versatile multi-surface waterborne primer PRODUCT USES Suitable for use as a primer to appropriately
More informationProperty Test/Standard Description
Other Technical Data Sheet 24100;24120;26200 1 24100 VValidationDate). 1 Product description This is a two component, anticorrosive water borne epoxy coating. It is a versatile, fast drying product containing
More informationDEKOGROUT 2/12 Antibacterial, flexible cement-based grout
Rev. 03/10-01-2019 Benfer DEKOGROUT 2/12 Antibacterial, flexible cement-based grout Antibacterial and mould resistant Water repellent Resistant to freeze/thaw cycles Free from hazardous siliceous fine
More informationHAMMERITE NO. 1 RUST BEATER PRIMER
TECHNICAL DATA SHEET Version 2 2018 June THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and
More informationThis product contributes to the Green Buildings Standard credits. Please see section Green Building Standards. Property Test/Standard Description
Approved 35682;35683 1 35682 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Can be used
More informationTechnical Data Sheet
MATTE CONTRACTOR CHOICE PAINT The Matte Contractor Choice C paint is designed for the contractor; it has good performance and opacity. No odor. Has very good brushability, leveling, durability, adhesion
More informationSIGMAZINC 160. Revision of March 2007 DESCRIPTION. two component moisture curing inorganic zinc (ethyl) silicate primer PRINCIPAL CHARACTERISTICS
5 pages Revision of March 2007 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationProduct Specification
Product Specification Product Name: PORTER S MINERAL SILICATE STAIN PRODUCT DESCRIPTION: is a highly durable coloured silicate dispersion stain for the decoration and protection of old and new fair-faced
More informationSikagard -205 W (Sterisheen)
Product Data Sheet Edition 03/10/2011 Identification no: 020807010020000001 (Sterisheen) Single component, waterborne modified acrylic resin surface coating with a mid-sheen finish Product Description
More informationProperty Test/Standard Description STANDARD GRADE
Other Technical Data Sheet 525;527;1549 1,2 525 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids,
More informationConstruction. Sikagard -205 W (Sterisheen) Single component, waterborne modified acrylic resin surface coating with a mid-sheen finish
Product Data Sheet Edition 03/10/2011 Identification no: 020807010020000001 (Sterisheen) Single component, waterborne modified acrylic resin surface coating with a mid-sheen finish Construction Product
More informationMosaic 100gr/m 2 /layer 125gr/m 2 /layer Ceramic Tiles 100gr/m 2 /layer 125gr/m 2 /layer Cementitious high porosity. Gloss 75Α:25Β
Product Description Neopox Special is a two-component solvent-based epoxy paint suitable for use on construction, metallic & GRP surfaces that undergo significant mechanical stress and need chemical resistance.
More informationE.MIX MOISTURE SEALER
E.MIX Super Fast Fix Fast setting, high performance, high strength, highly flexible, strong polymerized thin bed tile adhesive for interior and exterior wall tile fixing complied with C2FTE class of EN
More informationPRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)
PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C
Other Technical Data Sheet 1505;1506 1 1505 novolac epoxy VValidationDate). 1 Product description This is a two component polyamine cured novolac epoxy coating. It is heat resistant up to 200 C and can
More informationBrick Slip Application Guide
Brick Slip Application Guide GENERAL MAINTENANCE & CLEANING OF WBS BRICK SLIPS Like solid brickwork, WBS Brick Slips are virtually maintenance free. The importance of sound site practices to avoid the
More informationPre-qualification testing in accordance with NORSOK M-501, Rev. 3, System 7, suitable for splash zone. Property Test/Standard Description
Other Technical Data Sheet 574;576 1,2 574 epoxy VValidationDate). 1 Product description This is a two component polyamine cured epoxy coating. It is a high solids, high build, glass flake reinforced product.
More informationConstruction. Sikagard -680S. Methacrylic resin protective and anti-carbonation coating for concrete. Product Data Sheet Version 9/5/05.
Product Data Sheet Version 9/5/05 Sikagard -680S Methacrylic resin protective and anti-carbonation coating for concrete Construction Description Uses Advantages Storage and Shelf Life Sikagard -680S is
More informationChemMasters. Installation Guidelines
ChemMasters Installation Guidelines Traz 25 is a state of the art, film forming concrete and masonry waterproofing sealer formulated with methyl methacrylate polymers. 1.0 General 1.1 Scope This specification
More informationCeracoat Group / Flawilerstrasse 31 / CH-9500 WIL / Switzerland / phone /
HIGH QUALITY NANOTECHNOLOGY COATINGS FOR MINERAL SURFACES WITH GRAFFITI PROTECTION : stone care premium industrial standard (GRAFFITI: EASY TO TAKE AWAY) CERACOAT COATING FOR MINERAL SURFACE: These products
More informationEpoxol Floor. Two component solvent-free epoxy system for creation of self-levelling floors. Fields of Application. Properties/ Advantages
Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor is a suitable screed that can be applied on cement-based floors which need high mechanical
More informationStamped Asphalt Generic Specification
Stamped Asphalt Generic Specification 1.0 GENERAL 1.1 Summary This generic specification refers to stamping a pattern into the asphalt surface and applying a colored surface coating treatment. The pattern
More informationEVERLAST CONCRETE TECHNOLOGIES PROTECTION PRODUCTS SECTION CONCRETE ADDITIVES AND ADMIXTURES
EVERLAST CONCRETE TECHNOLOGIES PROTECTION PRODUCTS SECTION 03060 CONCRETE ADDITIVES AND ADMIXTURES GENERAL 1.1 SECTION INCLUDES A. Concrete additives and admixtures for the following applications: 1. Concrete
More informationProperty Test/Standard Description
Approved 32222;32223;35142 1 32222 epoxy composite ^(ValidationDate) 1 Product description This is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250 C (482
More informationData Sheet 832 Englisch
Englisch Primer LF 832 Floortec 2K-Epoxi-Grund LF 832 solvent-free, transparent primer resin as primer in Floortec PUR Coating System and under Floortec 2C Epoxy Thick Layer LF 834 Properties Solvent-free,
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 30 C calculated VOC-USA / VOC Hong Kong EPA Method 24
Other Technical Data Sheet 27800;27801 1 27800 VValidationDate). 1 Product description This is a two component amine cured pure epoxy coating. It is a fast drying, high solids, high build product. It provides
More informationCHARACTERISTICS / ADVANTAGES. Yellowish-transparent. PACKAGING 20 kg per pail
PRODUCT DATA SHEET Epoxy-resin binder for priming, levelling mortar and for screeds PRODUCT DESCRIPTION Sikafloor -156 is a colourless, 2-component low viscosity epoxy resin. USES For priming and levelling
More informationProperty Test/Standard Description
Approved 1537 1,2 1537 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. It is a fast drying, high build, zinc phosphate pigmented product. Can be
More informationZinc Silicate (Inorganic)
Product code: 477-041: part A 477-042: part B General description: Two-component, zinc-ethyl silicate-. Forms a continuous coat of metallic zinc that provides cathodic protection to metal (as in hot galvanization).
More informationTwo component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4
Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor P is a suitable screed that can be applied on cement-based floors which need high mechanical
More informationTechnical Data Sheet
ART OF COLOR EGGSHELL PAINT The Art of Color products line, because of the high quality of its raw materials, leaves a nice matte finish, while providing maximum performance. This coating has a low VOC
More informationProperty Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
Approved 23660 1,2 23660 silicone acrylic ^(ValidationDate) 1 Product description This is a one component physically drying silicone acrylic coating. It is an aluminum pigmented product. It is heat resistant
More informationApproved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 29 C IED (2010/75/EU) (calculated)
Approved 15261;15962 1,2 15962 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids product. This product is tintable
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 15 C IED (2010/75/EU) (calculated)
15560;15561 1 15560 zinc ethyl silicate ^(ValidationDate). 1 Product description This is a two component moisture curing inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc dust
More informationBTM BT2K 600. Areas of Use
BTM BT2K 600 Bitumento BT2K 600 is a solvent-free, two-component, elastic, water-based, fiber reinforced, rubber and cement based bitumen waterproofing material. Areas of Use As water and moisture tight
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1
2401;3440 1 3440 epoxy VValidationDate). 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product.
More informationHighly opaque, water-based weather protection paint
Highly opaque, -based weather protection paint Colour Availability Quantity per pallet 672 200 80 30 22 1 1 Packaging unit 6 x 0,75 l 2 x 2,5 l 2 x 5 l 10 l 20 l 600 l 100 ml Type of container Sample tin
More informationThis product contributes to the Green Buildings Standard credits. Please see section Green Building Standards. Property Test/Standard Description
Approved 25780 1 25780 acrylic ^(ValidationDate) 1 Product description This is a one component waterborne acrylic thin film intumescent coating. Independently tested and approved for fire protection of
More informationThis product contributes to the Green Buildings Standard credits. Please see section Green Building Standards. Property Test/Standard Description
Approved 24640;24680 1 24640 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. This product is LEED compliant and contains no solvents on the Hazardous Air
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method F (35 C) VOC-USA / VOC Hong Kong EPA Method 24
1169;1170 1,2 1169 epoxy VValidationDate). 1 Product description This is a two component polyamide cured high molecular weight epoxy coating. It has a gloss finish with fair gloss retention. To be used
More informationConstruction. One component cementitious mortar fibre reinforced for flexible waterproofing. Product Description. Product Data. Form.
Product Data Sheet Edition 12/12/2014 Identification no: 02 07 01 01 001 0 000180 Sikalastic -1K Sikalastic -1K One component cementitious mortar fibre reinforced for flexible waterproofing Construction
More informationProperty Test/Standard Description
Approved 29560;29561 1 29560 zinc silicate ^(ValidationDate) 1 Product description This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use
More informationHeatgard 4 acts as a protective shield against Solar Radiation by re-radiating most of the infra-red & ultra violet rays back into the atmosphere.
MEDIUM BUILD RADIANT HEAT CONTROL RADIANT HEAT BARRIER PAINT There s no getting cool without it Marmoran Coating System was used on the entire roof (70,000 m²) of this shopping centre. acts as a protective
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 32 C calculated IED (2010/75/EU) (theoretical)
Approved 10680;2401 1 10680 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high
More informationSIGMACOVER 350. Revision of February 2010 DESCRIPTION. two component high build polyamine cured epoxy primer/coating PRINCIPAL CHARACTERISTICS
5 pages Revision of February 2010 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationImron HydroClearCoat. 2K Waterbased Clearcoat PUR. Technical Data Sheet. Description
Description Imron HydroClearCoat HC300 is a waterbased 2-component polyurethane clearcoat especially developed for application on all types of commercial vehicles. Composition based on acrylic resin. Products
More information2K Supra TECHNICAL INFORMATION SATIN. Technical Data
Waterborne 2-Component polyurethane finish for wood and cork floors. For extremely heavy wear. Elastic, excellent chemical and abrasion resistance. Waterborne polyurethane formula for extreme wear resistance
More informationvdw 870 Quality for Professionals Paving Joint Sand Stabiliser For domestic areas
vdw 870 For domestic areas For stabilising sand filled joints in paved areas with natural stone setts and slabs, concrete blocks and slabs or brick paving etc. Suitable for new and refurbishment use in
More informationMosaic 100gr/m 2 /layer 125gr/m 2 /layer Ceramic Tiles 100gr/m 2 /layer 125gr/m 2 /layer Cementitious high porosity. Gloss 75Α:25Β
Product Description Neopox Special is a two-component solvent-based epoxy paint suitable for use on construction, metallic & GRP surfaces that undergo significant mechanical stress and need chemical resistance.
More informationData sheet Armatop MP / Page 1
Data sheet Armatop MP / Page 1 Armatop MP Bonding and reinforcing compounds for alsecco external wall systems Areas of application Bonding Bonding of ecomin-por, mineral wool, polystyrene and cork exterior
More informationNutech Concrete Range
Nu-tech Pavecoat H2O is a single pack water-based acrylic concrete sealer and has been developed to achieve excellent penetration and adhesion characteristics to overcome the problems associated with traditional
More informationProtective: Recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
Approved 11480 1,2 11480 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a semi gloss finish with good gloss retention. It is fast drying.
More informationSample Specification
Sample Specification Section 02760 Paving Specialties StencilCoat Commercial Asphalt and Concrete Surfacing System 1.0 GENERAL 1.1 Summary The StencilCoat Commercial Asphalt Surfacing System is a 100%
More information