ILMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
|
|
|
- Grant Potter
- 6 years ago
- Views:
Transcription
1 ILMK 8 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from cmh O up to mh O Output signals -wire: ma -wire: 0 0 V others on request Special characteristics diameter 9.5 mm especially for sewage, viscous and pasty media Optional versions IS-protection zone 0 mounting with stainless steel pipe flange version diaphragm 99.9 % AI O different kinds of cables different kinds of elastomers The stainless steel probe ILMK8 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Preferred areas of use are Water drinking water abstraction Sewage waste water treatment water recycling Fuel / Oil level monitoring in open tanks with low filling heights fuel storage tank farms / biogas plants D-656 Hohen Neuendorf / OT Bergfelde
2 Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard Option IS-protection -wire: ma / V S = 9... V DC -wire: ma / V S = V DC Option -wire -wire: V / V S =.5... V DC Performance Accuracy Permissible load Influence effects standard: ± 0.5 % FSO option: ± 0.5 % FSO R max = [(V S V S min) / 0.0 A] Ω supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω ± 0. % FSO / year at reference conditions 700 msec Long term stability Turn-on time Mean response time < 00 msec measuring rate 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Electrical connection (only for 4 0 ma / -wire) Cable with sheath material PVC (-5 70 C) grey PUR (-5 70 C) black FEP (-5 70 C) black TPE (-5 5 C) blue shielded cable with integrated air tube for atmospheric pressure reference Materials (media wetted) Housing stainless steel.4404 (6 L) Seals FKM FFKM EPDM others on request Diaphragm standard: ceramics Al O 96 % Option: ceramics Al O 99.9 % Nose cone POM Explosion protection Approval DX4-LMK 8 zone 0 4 : II G Ex ia IIB T4 Ga zone 0: II D Ex iad 0 T 85 C Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 7 nf, L i = 5 µh Permissible media temperature in zone 0: C with p atm 0.8 bar up to. bar zone and higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m 4 for optional stainless steel pipe following designation is valid: "II G Ex ia IIC T4 Ga" (zone 0) Miscellaneous Current consumption max. ma Weight approx. 400 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC D-656 Hohen Neuendorf / OT Bergfelde
3 Wiring diagram -wire-system (current) -wire-system (voltage) p supply + A p supply + VS VS supply I supply U signal + V Pin configuration Electrical connection cable colours (DIN 4700) Supply + wh (white) Supply bn (brown) Signal + (only for -wire) gn (green) Shield gn/ye (green / yellow) Dimensions (in mm) LMK 8 standard LMK 8 with thread R" for stainless steel pipe LMK 8 flange version dimensions in mm dimensions DN5 / DN40/ DN50 / DN80 / PN6 D k d b f n d D-656 Hohen Neuendorf / OT Bergfelde
4 Transmitter flange for flange version Technical data ILMK 8, ILMK 8H, ILMK 458, ILMK 458H Flange material stainless steel.4404 (6L) Hole pattern according to DIN 507 Version Size (in mm) Weight DN5 / D = 5, k = 85, b = 8, n = 4, d= 4. kg DN50 / D = 65, k = 5, b = 0, n = 4, d= 8.6 kg DN80 / PN6 D = 00, k = 60, b = 0, n = 8, d= 8 4. kg Transmitter flange DN5 / ZFS540 Transmitter flange DN50 / ZFS5040 Transmitter flange DN80 / PN6 ZFS806 Mounting flange with cable gland Technical data all probes Flange material stainless steel.4404 (6L) Material of cable gland standard: brass, nickel plated on request: stainless steel.405 (0); plastic Seal insert material: TPE (ingress protection IP 68) Hole pattern according to DIN 507 Version Size (in mm) Weight DN5 / D = 5, k = 85, b = 8, n = 4, d= 4.4 kg DN50 / D = 65, k = 5, b = 0, n = 4, d= 8. kg DN80 / PN6 D = 00, k = 60, b = 0, n = 8, d= kg DN5 / with cable gland brass, nickel plated ZMF540 DN50 / with cable gland brass, nickel plated ZMF5040 DN80 / PN6 with cable gland brass, nickel plated ZMF806 cable gland M6x.5 with seal insert (for cable mm) Terminal clamp Technical Data all probes with cable mm Material standard: steel, zinc plated optionally: stainless steel.40 (04) Weight approx. 60 g Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) Z0058 Z0057 D-656 Hohen Neuendorf / OT Bergfelde
5 ILMK 8 ILMK Pressure in bar in mh O Input [mh O] [bar] Housing Diaphragm C Output 4 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire E Seals FKM EPDM FFKM 7 Electrical connection PVC-cable PUR-cable FEP-cable TPE-cable 4 Accuracy standard 0.5 % option 0.5 % Cable length in m standard: m PVC 0 0 standard: 5 m PVC standard: 0 m PVC 0 0 standard: 5 m PVC 0 5 standard: 0 m PVC 0 0 special length PVC Special version Stainless steel.4404 (6L) standard: m PUR 0 0 standard: 5 m PUR standard: 0 m PUR 0 0 standard: 5 m PUR 0 5 standard: 0 m PUR 0 0 special length PUR standard: 5 m FEP standard: 0 m FEP 0 0 special length FEP special length TPE cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply Ceramics Al O 96% Ceramics Al O 99.9% standard prepared for mounting with stainless steel pipe flange version Standard lengths / 5 / 0 / 5 / 0 m are available from stock, special lengths are manufactured order-related, price per meter (see above) This price list contains product specification; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice. D-656 Hohen Neuendorf / OT Bergfelde
LMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma -wire: 0 0 V others on request
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up to 0... 0 bar Output signals
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
Pressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
Field case for temperature transmitter Model TIF11
Electrical temperature measurement Field case for temperature transmitter Model TIF11 WIKA data sheet TE 62.02 Applications Plant construction Process engineering General industrial applications Energy
With uncoated stainless steel rope electrode and coated dynamic anchorage for level measurement of bulk-solid materials in higher silos.
průmyslová elektronika Capacitive level meters CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Easy and
Magnetic float switch For vertical installation Model FLS for nuclear power plants
Level measurement Magnetic float switch For vertical installation Model FLS for nuclear power plants KSR data sheet FLS for NPP for further approvals see page 3 Applications Level measurement for almost
CAPACITIVE LEVEL METERS CLM 36
CAPACITIVE LEVEL METERS CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Easy and quick connecting by
Pressure Transmitter STK136,STK136Q
SENSE Instruments CO., LTD. Production address: # 55 Chuanqiao RD.Jinqiao Export processing Industrial Zone Pudong New Area 20206 Shanghai China Telefon: +86(2) 585 0878 Telefax: +86(2) 5899 396 E-mail:
Capacitive level meter CLM 36
For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Variants with rope electrode or with coated electrode for aggressive
Pressure and temperature transmitters ATM/T
Pressure and temperature transmitters ATM/T Version: 25.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5, (1) > 0.5... 2 > 2... 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst
CombiTemp TCR6 Standard RTD temperature sensor
CombiTemp TCR6 Main features Sensor and connection in stainless steel, ISI 316 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating
Level measurement CleverLevel LBFS Point level detection
Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO Capacitive level meters CLM 36 Capacitive level meters Riels CLM are designed for continuous level measurement of liquids, powders and bulk-solid
Level measurement CleverLevel LBFS Point level detection
Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky
Flow measurement of Liquids and Gases
Flow measurement of Liquids and Gases Metallic construction Operates horizontally or vertically DN 40 to DN 500 Flow rate: - Water: 0.8 m 3 /h up to 1600 m 3 /h. - Air: 45 Nm 3 /h up to 24000 Nm 3 /h.
FN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring
Level Measurement and Monitoring FN04 Liquid level sensor with continuous detection Level measurement unaffected by foam formation, conductivity, pressure or temperature Remote indication over very long
KDS. All Metal Variable Area Flowmeter. for liquids and gases. Measuring range: l/h l/h water 5-50 Nl/h...
All Metal Variable Area Flowmeter for liquids and gases measuring monitoring analysing : 0.1-1 l/h... 20-200 l/h water 5 - Nl/h... 600-6000 Nl/h Accuracy: ±3 % of full p max : 420 bar; t max : 130 C OConnection:
4-Beam-Turbidity Meter ITM-4
SENSORS FOR FOOD AND BIOPHARMA. Product Information ITM-4 FOOD 4-Beam-Turbidity Meter ITM-4 Application / Specified Usage Turbidity measurement from 0 up to 5000 NTU resp. 0 up to 1250 EBC Filter monitoring
4-Beam-Turbidity Meter ITM-4
SENSORS FOR AND BIOPHARMA. Product Information ITM-4 4-Beam-Turbidity Meter ITM-4 Application / Specified Usage Turbidity measurement from 0 up to 5000 NTU resp. 0 up to 1250 EBC Filter monitoring Phase
4-Beam-Turbidity Meter ITM-4
1 Product Information ITM-4 4-Beam-Turbidity Meter ITM-4 Application / Specified Usage Authorizations Turbidity measurement from 0 up to 5000 NTU resp. 0 up to 1250 EBC Filter monitoring Phase separation
8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.
SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional
PRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches.
PRESSURE SWITCHES 8D-LT Electro-mechanical pneumatic pressure switches 8D-LT x Electro-mechanical pneumatic pressure switches Page -0 Page -0-0 8D-LT G/, / NPT or flange Microswitch with gold plated contacts
Diaphragm pressure gauge
Diaphragm pressure gauge with switch function, NS 00/60,Type series BE2 Features Diaphragm pressure gauge with switch function High quality case with bajonet ring NS 00/60 per EN 837-3 S, alternative safety
SITRANS P measuring instruments for pressure
Overview Supplementary electronics for 4-wire connection Structural design Dimensions (W x H x D) in mm (inch) Electrical connection 80x10x60 (3.15x4.7x.36) Screw terminals (Pg 13.5 cable inlet) or Han
SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:
SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-
Microlectra bv. Capacitive level meter CLM 36
www.microlectra.nl průmyslová elektronika Capacitive level meter CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs,
ENGLISH. Datasheet. RS single element: Single 4 wire element, allowing connection to any Pt100 2, 3 or 4 wire instrument
Datasheet ENGLISH Platinum Resistance Thermometer Pt100 Outdoor/Cold Store Temperature Sensors IP67 Weatherproof Housing, 4 wire single or dual element, or 4-20mA option Weatherproof IP67 rated wall mounting
Bypass Level Indicator / Functional description
Bypass Level Indicator / Functional description Functional description Bypass level indicators form an integral part of the pressure vessel. Via two process connections a standpipe ( bypass ) is mounted
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE C20 C21 C26-2 C26-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
Type Type 2000 Transducers. I/P & E/P Transducers
Type 2000 I/P & E/P Description Principle of Operation The Type 2000 I/P and E/P transducers utilize closed-loop pressure feedback-control for precision pressure output and minimized effects of temperature,
High temperature pressure sensor
Pressure High temperature pressure sensor for gas turbine- and thermoacoustics applications Differential, acceleration compensated, piezoelectric pressure sensor for operating temperatures up to 700 C.
TRICOR. TRICOR Series. Technical Datasheet. Mass Flow Meters MISURATORE MASSICO - CORIOLIS MASS FLOW METER CORIOLIS TECHNOLOGY
Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass flow, volume flow, temperature and density and consequently can replace different
High Temperature Pressure Sensor
Pressure High Temperature Pressure Sensor for Gas Turbine- and Thermoacoustics Applications Differential, acceleration compensated, piezoelectric pressure sensor for operation temperatures up to 700 C.
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with DIN B Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with DIN B Head With stainless steel plug (no thread) Pt100 probe with DIN B terminal head Class B, 4 wire connection Various
SPRING LOADED THERMOCOUPLE CONFIGURATIONS
SPRING LOADED THERMOCOUPLE CONFIGURATIONS FOR USE WITH THERMOWELLS II 3G Ex na/nl TCRN/WN/TN S30 S31 S36-1 S36-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration guarantees
APT3200 SMART PRESSURE TRANSMITTER. Range and Sensor Limits Refer to Table 1. Isolation Input/output isolated to 500Vrms (707 Vdc)
Range and Sensor Limits Refer to Table 1 Zero and Span Adjustment Limits Zero and span values can be set anywhere within the range limits stated in Table 1. Span must be greater than or equal to the minimum
SECTION PRESSURE AND DIFFERENTIAL PRESSURE GAUGES
SECTION 40 72 43 PRESSURE AND DIFFERENTIAL PRESSURE GAUGES PART 1- GENERAL A. The Waterpilot FMX21 is designed for hydrostatic level measurement. It has a robust ceramic sensor and integrated temperature
Miniature I/P, E/P Transducer
Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional
EE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features
EE300ExHT The EE300Ex humidity and temperature transmitter fulfils the requirements of the ATEX directives on intrinsically safe operating equipment for use in potentially explosive atmospheres in zone
LIQUID METER TYPE FMO
LIQUID METER TYPE FMO INNOVATORS IN FLOW TECHNOLOGY FLUX LIQUID METER TYPE FMO OVAL ROTOR DESIGN FLUX liquid meters type FMO are positive displacement flowmeters according to the oval rotor design. They
EE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features
EE300ExHT The EE300Ex humidity and temperature transmitter fulfils the requirements of the ATEX directives on intrinsically safe operating equipment for use in potentially explosive atmospheres in zone
Electromagnetic flowmeters. dg: NEW. Sensor MUT 2200 EL DS100-2-ENG 1/12
Electromagnetic flowmeters dg: www.oryana.com.ar NEW Sensor MUT EL DSENG 1/ Sensor MUT EL MUT EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process applications.
RHM80. High Flow Coriolis Mass Flow Meter. Features. Applications. Benefits
RHM80 High Flow Coriolis Mass Flow Meter Features Standard pressure ratings up to 341 bar (4946 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to 0.15% Density uncertainty
RHM60. Coriolis Mass Flow Meter with Uncompromising Performance. Features. Applications. Benefits
RHM60 Coriolis Mass Flow Meter with Uncompromising Performance Features Standard pressure ratings up to 490 bar (7107 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down
Besides measurement of humidity and temperature EE30EX series calculate the values of the following physical quantities:
Series 0EX series transmitters from Automatikprodukter are designed for the accurate measurement of humidity and temperature in the range between 0...0% RH and -40...180 C (-40... ). Models for pressure
HLX300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features
HLX300ExHT The HLX300Ex humidity and temperature transmitter fulfils the requirements of the ATEX directives on intrinsically safe operating equipment for use in potentially explosive atmospheres in zone
Intrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Variables
Data Sheet 907025 Page 1/12 Intrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Variables The hygrothermal transducers measure the relative air humidity and temperature
Diaphragm pressure gauge per EN 837-3,
Diaphragm pressure gauge per EN 837-3, chemical design, NS 100/160,Type series BA2 Features Diaphragm pressure gauge Nominal ranges -400 mbar to -1...24 bar, 0 25 mbar to 0 25 bar High quality case with
P235S _ PIEZO-RESISTIVE PIEZOMETERS PIEZOMETERS
_ PIEZO-RESISTIVE PIEZOMETERS PIEZOMETERS PIEZO-RESISTIVE PIEZOMETERS Piezo-resistive piezometers are very accurate pressure transducers suitable for high frequency readings and short term applications.
Expert SUBMERSIBLE LEVEL TRANSMÍTTERS BROCHURE US 2.75 EXPERT BROCHURE 1401
Expert SUBMERSIBLE LEVEL TRANSMÍTTERS BROCHURE US 2.75 EXPERT BROCHURE 1401 OUTSTANDING DURABILIT Y AND HIGH PRECISION 2 MJK level transmitters are designed for level measurement by immersion in open channels,
Electromagnetic Flange Type BTU METERS. eflow 800H SERIES. Size DN10 to DN1200 DESCRIPTION APPLICATION FEATURES
DESCRIPTION eflow 800H series is flange type Electromagnetic Heat or BTU meter that can be used for measuring energy consumption in heating or cooling application for HVAC and other energy measurement
PK45I _ DRIVE-IN PIEZOMETERS PIEZOMETERS
_ DRIVE-IN _EN_02_4/2017 DRIVE-IN Drive-in piezometers, also called push-in piezometers, are designed for installation in soft clays, organic or fine grained cohesionless soils. The piezometers are pushed
Differential pressure
Differential pressure 228 Overview Differential pressure 230 VEGADIF 65 232 Chemical seal 236 Oval flange adapter, mounting bracket, cutting ring screwing 238 Valve block 227 Overview Differential pressure
TSK S 3. Flap Flowmeter for liquids. Range: m 3 /h. Accuracy: ± 2.0 of reading. : PN 40, t max: C. p max
Flap Flowmeter for liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
150 mm. 1/8 BSPP brass male compression fitting with locknut included
ENGLISH Datasheet Platinum Resistance PT100 Flat Tip Probe 4mm diameter x 150mm long 2 wire with 1 metre flying lead, complete with 1/8 BSP compression fitting & locknut 4mm 25mm 5.5/6mm(max) 150 mm General
Level Switch. Series. instrumentation for fluids LC40. Instructions Manual
instrumentation for fluids Level Switch Series LC40 Instructions Manual R-MI-LC40 Rev.:3 English Version TABLE OF CONTENTS 1. INTRODUCTION... 3 2. RECEPTION... 3 3. INSTALLATION... 3 4. ELECTRICAL CONNECTION...
Platinum Resistance Pt100 Autoclave Drain Probe, 4 Wire Compatible with most common makes of Autoclaves
ENGLISH Datasheet Platinum Resistance Pt100 Autoclave Drain Probe, 4 Wire Compatible with most common makes of Autoclaves Pt100 Autoclave & steriliser drain temperature probe For use to monitor the fluid
Flow Rate Transmitters/ Flow Switches
Flow Rate ransmitters/ Flow Switches FOw RAE RANSMIERS FOw SwICHES o measure the flow rate in machines and systems HYDAC EECRONIC offers various fl ow rate transmitters and fl ow switches. he fl ow rate
Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths
Datasheet ENGLISH Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths High temperature, rugged, flexible Pt100 probe Suitable
Pt100 (100 0 C) to IEC 751, Class B, 4 wire 3.0, 4.0, 4.5 or 6.0mm diameter 316 stainless steel sheath.
Datasheet Platinum Resistance Thermometer Pt100 Industrial Sensor Probe, Class B Available in 3.0, 4.0, 4.5 or 6.0mm diameter x Various probe lengths ENGLISH Multipurpose Pt100 Probe to IEC751 Class B,
Zirconia Oxygen Analyzer
Data Sheet SS/ZDT/GP_6. Zirconia Oxygen Analyzer High Temperature Version ZDT GP Series Cost-effective solution for high temperature applications NEMA 4X/IP66 protection reliable operation in demanding
Liquid level switch BW 17
KROHNE 09/2001 7.02369.21.00 GR/PRINTO Liquid level switch Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level
Platinum Resistance Thermometer Pt100 Precision Probe - High accuracy platinum resistance thermometer probe, 6mm diameter x 250mm
Datasheet ENGLISH Platinum Resistance Thermometer Pt100 Precision Probe - High accuracy platinum resistance thermometer probe, 6mm diameter x 250mm Precision Pt100 sensor offering high accuracy over the
SensoLyt System Design
Sensolyt Sensor Systems Measurement SensoLyt System Design For continuous measurement, especially under the difficult conditions very often found in sewage treatment facilities, very high demands are made
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or
ENGLISH Datasheet Platinum Resistance Pt1000 Class B Sensor with Teflon insulated lead
ENGLISH Datasheet Platinum Resistance Pt1000 Class B Sensor with Teflon insulated lead (Image shows 4 wire) Pt1000 element to IEC 751 Class B 2 wire configuration Temperature range -50 C to + 200 C Pt1000
Datasheet Platinum Resistance Pt100 Dual Element Industrial Sensor Probe 6mm diameter x 150mm or 250mm probe lengths
Datasheet Platinum Resistance Pt100 Dual Element Industrial Sensor Probe 6mm diameter x 150mm or 250mm probe lengths ENGLISH Duplex PRT s with two independent PT100 detectors inside tip of probe. This
Thermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
ELS LEVEL SWITCH ELS. ELS B10p, ELS B10x, ELS B101x ELS K01, ELS K02, ELS K03 ELS P01, ELS P03, ELS P04
ES evel sensors are used for tank level control. Different protection connection, material kinds are available. Working Princible: When magnetic field of magnet within the buoy moving along tube according
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with switch contacts Model 432.56, high overload safety up to 100 bar Model 432.36, safety version, high overload safety up to 400 bar WIKA data
QGO Oxygen Sensor. Building Technologies HVAC Products
7 842 QGO20.000D17 QGO20.000D27 Oxygen Sensor QGO20.000... The QGO20... is an oxygen sensor designed for acquiring the residual oxygen content of flue gases in heat generation plant burning natural gas
Sensor unit MC2 for toxic gases and oxygen with analog output
Page 1 July 2016-2 Exchangeable sensor unit including digital value processing, temperature compensation and self control for the continuous monitoring of the ambient air. The sensor unit MC2 houses a
PRODUCT RANGE CABLE GLANDS
PRODUCT RANGE CABLE GLANDS INDUSTRIAL CABLE GLANDS The ideal solution for each application HUMMEL offers a huge range of Cable Glands for industrial applications. High-quality materials and innovative
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
CAPACITIVE LEVEL SENSORS DLS 27
CAPACITIVE LEVEL SENSORS DLS 27 For limit level sensing of liquid, and bulk-solid and powder materials Xi version for usage in explosive areas Direct mounting into various containers, silos, vessels, tanks,
Expert SUBMERSIBLE LEVEL TRANSMITTERS BROCHURE EN 2.75 EXPERT BROCHURE 1401
Expert SUBMERSIBLE LEVEL TRANSMITTERS BROCHURE EN 2.75 EXPERT BROCHURE 1401 O U T S T A N D I N G D U R A B I L I T Y A N D H I G H P R E C I S I O N 2 MJK level transmitters are designed for level measurement
OM... Screw-Type Volumetric Flow Meter. for Viscous Media. Measuring ranges: l/min liquid
Screw-Type Volumetric Flow Meter for Viscous Media measuring monitoring analysing OM... Measuring ranges: 0.-0... 0-000 l/min liquid OMeasuring O accuracy: ± 0.% of span : 00 ± 0.% of span : 0 p max :
Temperature Measurement
Technical description Design A resistance comprises the measuring resistor (metal; platinum, Pt or nickel, Ni) and the mounting and connection parts required in each case. In the standard version, the
TOPAS PMG / PMH Hydraulic sensor Hot water
TOPAS PMG / PMH Hydraulic sensor Hot water Applications The hydraulic sensors form part of a heat meter and operate according to the multiple-jet measuring principle. Features Insensitive to turbulences
Standard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,
Load cell Pendeo Process and mounting kits
Load cell Pendeo Process and mounting kits Digital weighing technology for maximum transparency and precision The digital compression load cells in the Pendeo Process series are specially designed for
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors Standards Certification 94/9/EC (ATEX) Directive According to European Standards EN 60079-0 EN 60079-1 EN 61241-0 EN 61241-1 Protection degeree IP66/67
Presented By. NicolScales.com Contact Us
Presented By Dallas Ft Worth Austin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO Accredited Calibration Company that has provided calibration, repair and sales of
Technical Datasheet. Compact Series Pressure Switch Models: CS2 & CS4. Compact Series. Key Features. Series Overview. Product applications
Technical Datasheet Pressure Switch Models: CS2 & CS4 Key Features Compact and rugged design. Stainless steel weatherproof enclosure IP66 / NEMA 4X Hermetically sealed SPDT or microswitch ATEX / IECEx
CATALOG. Variable Area Flowmeter EASYFLOW SMART IN FLOW CONTROL.
CATALOG Variable Area Flowmeter EASYFLOW www.sedflowcontrol.com SMART IN FLOW CONTROL. Easyflow Applications Monitoring of the flow of concentrate and recirculation of a Reverse Osmosis Water Treatment
VLM10 In-line Vortex Mass Flow Meter
VLM10 In-line Vortex Mass Flow Meter Description The VLM10 in-line vortex flowmeter measures process fluid flow by detecting the frequency at which vortices are shed from an obstruction in the process
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
D5100 Industrial Differential Pressure Transducer
316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections DESCRIPTION The
Float Flow Meters series NF
Float Flow Meters series NF - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small dimensions Doc. no.: 22, en_cat_nf, 8/2015 Usage Flowmeters type NF are
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 May 2009 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
A BB ME ASU R E ME NT & AN AL Y T ICS D AT A S H E ET. SensyTemp TSHY (HY R-4E) Resistance thermometer for the food and beverage industries
A BB ME ASU R E ME NT & AN AL Y T ICS D AT A S H E ET SensyTemp TSHY (HY R-4E) Resistance thermometer for the food and beverage industries 2 TSHY RESISTANCE THERMOMETER FOR THE FOOD AND BEVERAGE INDUSTRIES
VARIABLE AREA FLOWMETER EASYFLOW.
VARIABLE AREA FLOWMETER EASYFLOW www.sedflowcontrol.com EASYFLOW APPLICATIONS Monitoring of the flow of concentrate and recirculation of a Reverse Osmosis Water Treatment Plant Reverse Osmosis System Water
BM SERIES COMPACT GUIDE WAVE GUIDED WAVE RADAR LEVEL INSTRUMENTS
GUIDED WAVE RADAR LEVEL INSTRUMENTS DESCRIPTION The microwaves impulses at high frequency travel through a stainless steel guide and they are reflected on the surface of the fluid to analyze. The period