COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
|
|
|
- Millicent Bethanie Sutton
- 6 years ago
- Views:
Transcription
1 COPPER PRODUCTS 110 COPPER PRODUCTS Rounds Squares Flats - Square Edge thru12-4 Flats - Full Round Edge (FRE) Cold Rolled Sheet Quarter Hard Copper Sheet Half Hard Copper Sheet Rolled Copper Sheet Cold Rolled Copper Plate COPPER PRODUCTS Half Hard Tellurium Rounds COPPER PRODUCTS Hard Drawn Beryllium Rounds Beryllium Copper Plate Low Hard (Supra) Beryllium Copper Plate High Hard (Ultra) COPPER PRODUCTS RWMA Class 3 Rounds RWMA Class 3 Flats RWMA Class 3 Heat Treated Plate COPPER PRODUCTS RWMA Class 3 Rounds Flats COPPER PRODUCTS RWMA Class 2 Rounds RWMA Class 2 Squares RWMA Class 2 Hex RWMA Class 2 Flats RWMA Class 2 Plate COPPER PRODUCTS Rounds TOLERANCES thru CDA 110 Electrolytic Tough Pitch copper is a soft, ductile, material that offers outstanding electrical & thermal conductivity, excellent cold formability, and fantastic corrosion resistance. Its inherent fabrication qualities allow it to be bent, soldered, drilled, riveted, and formed to fit almost any specification. Typical industrial uses include architecture, automotive, building, electrical, fasteners, & stamping. 12-1
2 110 COPPER ROUNDS UNS-C11000 CDA ALLOY 110, ASTM-B-187 1/ / / / / / / / / / / / / / *9ft mill length **8FT MILL LENGTH ***5-6ft random mill lengths 1-3/ / / / / / / / /4* /2** *** *** COPPER SQUARES UNS-C11000 CDA ALLOY 110 ASTM-B-187 1/ / / / / / **Produced to ASTM B / / / ** Visit the Alro Web Site
3 110 COPPER FLATS (SQUARE EDGE) UNS-C11000 CDA ALLOY 110 ASTM-B-187 1/16 x 1/8 x 3/16 x 1/4 x 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / Continued on next page 1/4 x 5/16 x 3/8 x 1-1/ / / / / / / / / / / / / / / / / / / /
4 110 COPPER FLATS (SQUARE EDGE) UNS-C11000 CDA ALLOY 110 ASTM-B-187 1/2 x 1/2 x 5/8 x 3/4 x 1 x 5/ / / / / / / / / / / / / / / / / / / / / x 1-3/ / / /4 x 1-1/ / / /2 x / / /4 x / x 2-1/ /2 x x
5 110 COPPER FLATS (FULL ROUND EDGE) UNS-C11000 CDA ALLOY 110 ASTM-B-187 1/8 x 3/16 x 1/4 x 1/ / / / / / / / / / / / / / /4 x 3/8 x 1/2 x 2-1/ / / / / / Alro s Production/Precision Sawing Length... Ask your sales representative about our tight tolerance saw cutting capabilities Your Product Cut To Precision... Squareness... Surface Finish... Angle Iron Square Tubing Squares Hex Round Tubing Rounds Channel Flat Bar 12-5
6 110 COLD ROLLED COPPER SHEET UNS-C11000 CDA ALLOY 110 ASTM-B x x x QUARTER HARD COPPER SHEET UNS-C11000 CDA ALLOY 110 ASTM-B x x x x HALF HARD COPPER SHEET UNS-C11000 CDA ALLOY 110 ASTM-B x x x x x x x x x
7 ROLLED COPPER SHEET CONSTRUCTION GRADE/ROOFING COPPER ASTM B oz x oz x x oz x oz x oz x COLD ROLLED COPPER PLATE UNS-C11000 CDA ALLOY 110 ASTM-B-152 1/4 x 36 x /8 x 36 x /2 x 36 x x /8 x 36 x /4 x 36 x x x 36 x /4 x 36 x /2 x 36 x /4 x 36 x x x 36 x /2 x 36 x x 36 x /2 x 36 x x 36 x x 36 x x 36 x Copper sheet and plate readily available 12-7
8 CDA 145 Tellurium Copper is used for forgings, screw machine parts or any parts requiring high conductivity, extensive machining, and or corrosion resistance. The addition of Tellurium results in short, clean chips and allows for higher cutting speeds than that of pure copper, with much less wear on tool life. Typical uses include electrical connectors, motor or switch parts, plumbing fittings, welding torch tips, and transistor bases. 145 HALF HARD TELLURIUM COPPER ROUNDS UNS-C14500 CDA ALLOY 145, ASTM-B-301 1/ / / / / / / / / / / / / / / / HARD DRAWN BERYLLIUM COPPER ROUNDS UNS-C172 CDA ALLOY 172, ASTM B196 1/ / / / / / / / / / / / Visit the Alro Web Site
9 CDA Beryllium Copper is the most universally used beryllium copper alloy and is known to demonstrate higher strength and hardness when compared to commercial copper alloys. It has strength and hardness characteristics that are comparable to steel. It is also recognized as an alloy that has outstanding wear & corrosion resistance, thermal fatigue, and thermal conductivity. Typical applications are electrical switches and connectors, fasteners, mold inserts, pump parts and valve seats. 172 BERYLLIUM COPPER PLATE LOW HARD (SUPRA) UNS-C17200 ASTM-B-194, CDA ALLOY 172 ROCKWELL C / / / / / / / / / BERYLLIUM COPPER PLATE HIGH HARD (ULTRA) UNS-C17200 ASTM-B-194, CDA ALLOY 172 ROCKWELL C / / / / / / / / / Visit the Alro Web Site. 12-9
10 17510 RWMA CLASS 3 COPPER ROUNDS UNS-C17510 CDA ALLOY / / / / / / / / / / / / / / / / / / / / / / / / / / / /
11 17510 RWMA CLASS 3 COPPER FLATS UNS-C17510 CDA ALLOY /8 x 1/4 x 3/8 x 1/2 x 3/ / / / / / / / / / / / / /8 x 3/4 x 1 x 1-1/4 x 1-1/2 x 2 x 3/ / / / / / / RWMA CLASS 3 HEAT TREATED COPPER PLATE UNS-C17510 CDA ALLOY / / / / / / / /
12 180 RWMA CLASS 3 COPPER ROUNDS BERYLLIUM FREE UNS-C180, CDA ALLOY 180 1/ / / / / / / / / / / / / / / / / / COPPER FLATS BERYLLIUM FREE UNS-C180 CDA ALLOY 180 1/4 x 3/8 x 1/2 x 5/8 x / / / / / / / / / /4 x 1 x 1-1/4 x 1-1/2 x / / / / / /
13 182 RWMA CLASS 2 COPPER ROUNDS UNS-C182, CDA ALLOY 182 1/ / / / / / / / / / / / / / / / / / / / / / / / / / RWMA CLASS 2 COPPER SQUARES UNS-C182 CDA ALLOY 182 3/ / / / / / RWMA CLASS 2 COPPER HEX UNS-C182 CDA ALLOY 182 1/ / / / / / / /
14 182 RWMA CLASS 2 COPPER FLATS UNS-C180 CDA ALLOY 180 1/4 x 3/8 x 1/2 x 5/8 x 1/ / / / / / / / / / / / /8 x 3/4 x 1 x 1-1/4 x 1-1/2 x / / / / / / / / / RWMA CLASS 2 COPPER PLATE UNS-C182 CDA ALLOY 182 1/ / / / / / / / /
15 187 COPPER ROUNDS UNS-C187, CDA ALLOY 187 1/ / / / / / Copper rounds can be obtained in full bars or cut to your desired size. Copper flat bars are available in a variety of thicknesses and widths
16 COPPER PRODUCTS TOLERANCES ROD and BAR TOLERANCES Tolerances for or Distance Between Parallel Surfaces of Cold-Drawn Rod or Distance Between Tolerances, Plus and Minus, A in. Parallel Surfaces Round Hex Up to 0.150, incl Over to 0.500, incl Over to 1.00, incl Over 1.00 to 2.00, incl Over B 0.30 B Applicable to alloys C11000 and C14500 A When tolerances are specified as all plus or all minus, double the values given. B Percent of specified diameter or distance between parallel surfaces. Tolerances for or Distance Between Parallel Surfaces of As Extruded Rod and Bar or Distance Between Tolerances, Plus and Minus, A in. Parallel Surfaces Round Hex Up to 1.00, incl Over 1.00 to 2.00, incl Over 2.00 to 3.00, incl Over 3.00 to 3.50, incl Over 3.50 to 4.00, incl Applicable to alloys C11000 and C14500 A When tolerances are specified as all plus or all minus, double the values given. Tolerances for Drawn or Rolled Rectangular and Square Bar Tolerances, Plus and Minus, A in. for Widths Given in inches 2 and under 2 to 4 4 to 8 8 to 12 Up to 0.500, incl Over to 1.00, incl Over 1.00 to 2.00, incl A When tolerances are specified as all plus or all minus, double the values given Visit the Alro Web Site
17 COPPER PRODUCTS TOLERANCES Tolerances for Sawed Edge, Deburred Coner Rectangular and Square Bar Tolerances, Plus and Minus, A in. for Widths Given in inches 2 and under 2 to 4 4 to 8 8 to 12 Up to 0.250, incl Over to 0.375, incl Over to 0.500, incl Over to 0.750, incl Over to 1.000, incl Over to 1.500, incl Over to A When tolerances are specified as all plus or all minus, double the values given. Width Tolerances for Rectangular Bar Width Tolerances, Plus and Minus, A in. Over to 0.500, incl Over to 1.25, incl Over 1.25 to 2.00, incl Over 2.00 to 4.00, incl Over 4.00 to 12.00, incl 0.30 B Applicable to alloys C11000 and C14500 A When tolerances are specified as all plus or all minus, double the values given. B Percent of specified diameter or distance between parallel surfaces. Straightness Tolerances Drawn Rectangles & Squares - 1/2" maximum bow edgewise curvature (depth of arc) in any 6 foot portion of the total length. DRAWN ROD (General Use). Length (feet) Maximum Curvature (depth arc) in inches Under 2 1/32 2 and under 5 1/32 in any 2 foot portion of the total length 5 and under 10 1/8 in any 5 foot portion of the total length 10 and over 1/2 in any 10 foot portion of the total length Visit the Alro Web Site 12-17
18 Beryllium Copper and R.W.M.A. Class #2 & #3 Tolerances Cold Drawn HR, A & T* Cold Drawn Rounds Rounds Hexagon Incl..090 to 1/2 incl ± ±.004 Over 1/2 to 1.00 incl ± ±.005 Over 1.00 to 2.00 incl ± ±.006 Over 2.00 to 3.00 incl... ± Over 3.00 to 4.75 incl... ± *Hot Rolled, Annealed & Turned. COPPER PRODUCTS TOLERANCES THICKNESS TOLERANCES - RECTANGULAR AND SQUARE R.W.M.A. CLASS 2 AND CLASS 3 Width in Inches Tolerance Plus or Minus Up to Over.500 Over Over incl to incl to 2.00 incl to 4.00 incl Up to.500 incl Over.500 to 1.00 incl Over 1.00 to 2.00 incl Over 2.00 to 4.00 incl %* *Expressed to the nearest These tolerance schedules are used by the industry as applicable to commercial material, in absence of other specifications by the purchaser. THICKNESS TOLERANCES - RECTANGLES ONLY R.W.M.A. CLASS 2 AND CLASS 3 Width in Inches Tolerance Plus or Minus Up to.500 incl.005 Over.500 to incl.007 Over to 2.00 incl.010 Over 2.00 to 4.00 incl.015 Note: For squares use thickness tolerances. Contact us today and learn more about The Alro Difference! ALRO
19 COPPER PRODUCTS TOLERANCES Sheet, Strip and Plate Tolerances UP TO 8 INCL Width in inches Tolerance Plus or Minus 8 TO 12 INCL 12 TO 14 INCL 14 TO 20 INCL 20 TO 24 INCL 24 TO 28 INCL 28 TO 36 INCL 36 TO 48 INCL Over.021 to.026 incl Over.026 to.037 incl Over.037 to.050 incl Over.050 to.073 incl Over.073 to.130 incl Over.130 to.188 incl Over.188 to.205 incl Over.205 to.300 incl Over.300 to.500 incl Over.500 to.750 incl Over.750 to 1.00 incl Over 1.00 to 1.50 incl Over 1.50 to 2.00 incl Over 2.00 to 3.00 incl Over 3.00 to 4.00 incl Over 4.00 to 5.00 incl Over 5.00 to 6.00 incl Beryllium Copper Plate cut to customer specifications Contact us today ALRO
20 COPPER PRODUCTS TOLERANCES Sheet, Strip and Plate Tolerances Length and Width Tolerances - for Square Sheared Metal in Inches LENGTH OR WIDTH Up to Over 1/16 Over 1/8 IN INCHES 1/16 incl to 1/8 incl Up to 20 incl 1/32 3/64 1/16 Over 20 to 36 incl 3/64 3/64 1/16 Over 36 to 120 incl 1/16 1/16 1/16 Straightness Tolerances - For Square Sheared Metal Width in Inches Up to 10 Over 10 in Inches incl Up to 1/8 incl 1/16 1/32 Over 1/8 to 3/16 incl 1/8 3/64 Over 3/16 1/8 1/16 Note: Not applicable to metal over 10 feet long. Maximum edgewise Curvature (depth of arc) in any 6 foot portion of the total length. Length and Width Tolerances - For Sawed Metal Width Tolerance Length Plus or Minus in Inches Width Tolerance For Lengths For Lengths in Inches All Plus up to 10' incl Over 10' In For For All Inches es es es up to Over 1-1/2 1-1/2 Incl Up to 12" wide incl 1/4 1/32 1/16 1/16 Over 12" to 120" wide incl 1/4 1/16 1/16 1/16 Straightness Tolerances - For Sawed Metal Width in Inches Up to 3 incl Over 3 1/16 3/64 These tolerance schedules are used by the industry as applicable to commercial material in the absence of other specifications by the purchaser Visit the Alro Web Site
ALUMINUM PRODUCTS. SECTION 1 ROD, BAR AND WIRE (COLD FINISHED) Alloy Descriptions and Applications Mechanical Properties...
ALUMINUM PRODUCTS SECTION 1 ROD, BAR AND WIRE (COLD FINISHED) Alloy Descriptions and Applications...10-4 Mechanical Properties... 10-5 thru 10-6 SIZE CHARTS 2011-T3 Rounds...10-7 2011-T3 Hexagons...10-8
CARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
Aircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
Alloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
Standard Specification for Nickel Rod and Bar 1
Designation: B 60 05 Standard Specification for Nickel Rod and Bar This standard is issued under the fixed designation B 60; the number immediately following the designation indicates the year of original
ThyssenKrupp Materials NA
Copper & Alloys COPPER BRASS BRONZE BEARING BRONZE LEADED BRONZE PHOSPHOR BRONZE MANGANESE BRONZE ALUMINUM BRONZE SILICON BRONZE NICKEL SILVER A ThyssenKrupp Services company ThyssenKrupp Materials NA
C51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:
Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%)
Designation: B
Designation: B 446 0 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N0629), and Nickel-Chromium-Molybdenum-Tungsten Alloy
The Convenience Stores For Metal
STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be
Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip 1
Designation: B 40 06 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip This standard is issued under the fixed designation B 40; the number immediately following the designation
We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars
EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We
SECTION 9 Aluminum. SECTION 9: Aluminum General Information Diamond Floor Plate
Plate & Sheet Expanded Metal & Grating Structurals & Bar Shapes HR Bars & Reinforcing SECTION 9 Aluminum SECTION 9: Aluminum... 131 General Information... 132-134 Sheets... 135-137 Diamond Floor Plate...
Standard Specification for Brass Rod, Bar, and Shapes 1
Designation: B 2 03 Standard Specification for Brass Rod, Bar, and Shapes This standard is issued under the fixed designation B 2; the number immediately following the designation indicates the year of
The Convenience Stores For Metal
TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
High Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
With Dura-Bar you will be able to:
Dura-Bar Stock List Dura-Bar is an engineered iron designed to meet our customers most critical requirements. It is manufactured to strict process controls that provide world-class quality and uncompromising
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
C26800 CuZn33 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition percentage C268 Cu 67 % Zn Rest % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments
STAINLESS STEEL STAINLESS HALF-ROUNDS STAINLESS SQUARES 303, 304/304L, 316L, 416, 17-4,
STAINLESS STEEL TECHNICAL DATA and APPLICATIONS Grade 201...9-2 Grade 303 and 303 G&P...9-3 Grade 304 and 304L...9-4 Grade 316L and 316L BSQ...9-5 Grade 410...9-6 Grade 416 and 416 PSQ...9-7 Grade 420...9-8
J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
Stainless Steel Bars. Your foremost provider of specialty products, services and solutions
Stainless Steel Bars Your foremost provider of specialty products, services and solutions Quik Guide Quik Guide to SPECIFICATION (3) COMPOSITION % (2) TYPE AISI GRADE Unified Numbering System (UNS) AMS
STAINLESS STEEL DELIVERY PROGRAM CONTENTS
DELIVERY PROGRAM CONTENTS INTRODUCTION 1 FLAT BAR 2 PLATE 4 SPECIALTY BLOCKS 5 ROUND BAR 6 SQUARE BAR 8 HEXAGON BAR 8 SHEET 9 ROUND TUBING 10 SQUARE TUBING 10 PIPE 11 HYPODERMIC TUBING 11 ANGLE 12 THREADED
SPECIFICATION FOR PRECIPITATION-HARDENING NICKEL ALLOY BARS, FORGINGS, AND FORGING STOCK FOR HIGH-TEMPERATURE SERVICE
SPECIFICATION FOR PRECIPITATION-HARDENING NICKEL ALLOY BARS, FORGINGS, AND FORGING STOCK FOR HIGH-TEMPERATURE SERVICE (Identical with ASTM Specification B 637-93a) 1. Scope 1.1 This specification covers
C22000 CuZn10 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 JIS BS CW501L Brass Rolled Products UNS Chemical Composition percentage C22000 Cu 90 % Zn Rest % This alloy is in accordance with RoHS 2002/96/CE for electric & electronic
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic
C26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
GLOSSARY. Glossary. Material Terminology. Glossary METALS, ALLOYS & MATERIALS
Glossary Material Terminology ALLOY - Substance having metallic properties, composed of two or more chemical elements of which at least one is an elemental metal. ANNEALING - Heating to and holding a suitable
CuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
It is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
Standard Specification for Copper-Beryllium Alloy Wire 1
Designation: B 197/B 197M 01 Standard Specification for Copper-Beryllium Alloy Wire 1 This standard is issued under the fixed designation B 197/B 197M; the number immediately following the designation
High Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³
Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &
1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
C27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
The ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
CDA ASTM ASARCON SAE AMS FEDERAL MILITARY OTHER
Product Description: Cartridge Brass, 70% Tempers: H01 Quarter Hard, H02 Half Hard, H04 Hard Solids: 3 8" to 2 1 2" OD Hex: 3 8" to 2" OD Rectangles: Consult Mill Standard Lengths: 144" Wrought Wrought
SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE
Company Website: www.metalspiping.com Your Reliable Supplier of Special Alloys! SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE SB-550/SB-550M (Identical with ASTM Specification B550/B550M-07(R2).)
RA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition Weight percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric &
Metal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
Copper & Alloys. The electric metal. ThyssenKrupp Materials NA Copper and Brass Sales Division
Copper & Alloys The electric metal. ThyssenKrupp Materials NA Copper and Brass Sales Division Copper and Alloys Contents Welcome to Copper and Brass Sales... 1 Introduction to Copper and Alloys... 2 Processing
Williams Metals. Providing Welding & Metals Solutions for Over 50 Years. Non-Ferrous Metals. Setting the Standard for Excellence.
Williams Metals and Welding Alloys, Inc. Providing Welding & Metals Solutions for Over 0 Years Non-Ferrous Metals Setting the Standard for Excellence. Williams Metals and Welding Alloys is a multi-location
Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip 1
Designation: B 4 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip This standard is issued under the fixed designation B 4; the number immediately following the designation
Custom 455, UNS S45500
Custom 455, UNS S45500 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Specifications: AMS 5617, AMS 5860, ASTM A313 ASTM A564, ASTM A693 Custom 455 Alloy Description Custom 455 stainless
C27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
TUFFALOY. bent tips DOUBLE-BEND, WITH STANDARD NOSE DESIGNS DOUBLE-BENT, ADDITIONAL NOSE DESIGNS FX-YZLD-O
DOUBLE-BEND, WITH STANDARD NOSE DESIGNS These standard cold-formed tips are bent from straight tips (some after added machining) and have the same hardness and conductivity. They outlast, many times over,
Bronze Rolled Products. Characteristics
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW453K JIS C 5210 BS PB 104 UNS Chemical Composition Weight percentage Cu C52100 Rest Sn 8 % P 0.1 % This alloy is in accordance with RoHS 2002/96/CE
Glossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
Aluminum Stock Guide.
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Aluminum Stock Guide. 1 New! in this edition of the Aluminum Stock Guide, CBS Part Numbers make ordering easier than
SECTION COPPER STANDING SEAM ROOFING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 61 16 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph as required and
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³
Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
Catalogue of European standards in the aluminium and aluminium alloys field
Catalogue of European standards in the aluminium and aluminium alloys field Under revision New publications during last two years (2017-2018) September 2018 David KRUPKA AFNOR Normalisation Industrial
INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
Mission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
SECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and install carbon steel or stainless steel alternating tread stair assemblies in accordance with the requirements
KNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING
KNIVES giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING ATLAS has comprehensive in-house designing facility to design new products according to customer s specific requirements with complete satisfaction
SECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this
AFK 502 R AFK 1 AFK 18 Fe-Co SOFT MAGNETIC ALLOYS
AFK 502 R AFK 1 AFK 18 Fe-Co SOFT MAGNETIC ALLOYS I GENERAL ASPECTS The recent marked development of electrical engineering equipment has led to an increasing demand for the miniaturization of ancillary
Think Stainless, Think Encore STAINLESS STEEL FOR SPECIALTY APPLICATIONS. Specialty Metals to Support Innovative Manufacturing
STAINLESS STEEL FOR SPECIALTY APPLICATIONS Specialty Metals to Support Innovative Manufacturing Specialty Metals to Support Innovative Manufacturing Encore Metals is a specialist supplier of high grade
TABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates
DRI1529-McNeilus-Revised 12/12/05 12:18 PM Page 1 McNeilus Steel, Inc. TABLE OF CONTENTS Page Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3 Cold Roll (Flats, Hex, Rounds) 17 Pipe, Pipe Tube,
Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
Solutions in Steel Innovative Technologies for Smart Solutions
Solutions in Steel Innovative Technologies for Smart Solutions Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established
Product list PRODUCT CATEGORIES ACCEPTED AT THE EVENT
PRODUCT CATEGORIES ACCEPTED AT THE EVENT A) Producers, distributors, traders, service centres, agents, purchase groups and users of the following products: 1. Iron ores and derivatives 1.1. Magnetite 1.2.
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1
Designation: B 124/B 124M 06 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1 This standard is issued under the fixed designation B 124/B 124M; the number immediately following
Pipe Pile. New Jersey Department of Transportation, Brielle, NJ. Route 70 Bridge over the Manasquan River, Brielle, NJ. USACE, Santa Maria, CA
Pipe Pile Similar to H-piles, pipe piles are also designed to transfer structural loads through the foundation to soils below. Where H-piles are typically classified as point bearing, pipe piles are most
ACC-U-PLATE. Rolled Plate Performance, Extruded Wide Bar Value. Sapa Industrial Extrusions
ACC-U-PLATE Rolled Plate Performance, Extruded Wide Bar Value Sapa Industrial Extrusions ACC-U-PLATE Highest Quality Extruded Wide Bar in the Industry ACC-U-PLATE offers the best total value for extruded
SECTION COLD-FORMED METAL TRUSSES
SECTION 054400 COLD-FORMED METAL TRUSSES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Identification. Type Analysis
Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur
SECTION ORNAMENTAL WELDED STEEL FENCING
SECTION 032300 ORNAMENTAL WELDED STEEL FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition Weight percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
SECTION ORNAMENTAL ALUMINUM FENCING
SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY STRIP, SHEET, AND PLATE
TECHNICAL LITERATURE: ASME SB-265 \[ASTM B265] Company Website: www.metalspiping.com Your Reliable Supplier of Nickel & Titanium Alloys SB-265 SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY STRIP, SHEET,
Copper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
Guide to Copper Beryllium
Guide to Copper Beryllium strip Guide to Copper Beryllium rod wire bar tube plate Brush Wellman is the leading worldwide supplier of High Performance Copper Alloys, including Copper Beryllium. We provide
Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service 1
Designation: B 67 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., West Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for
50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated
50948-RHN Putney Friday, 15 December 2017 This document includes: Code Section Revision Dated Z11 Purpose made metalwork 1 Table of Contents Title Z11 Purpose made metalwork Page 3 Z11 Purpose made metalwork
Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
SECTION - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
ATI 13-8 Supertough. ATI 13-8 Supertough Alloy. Technical Data Sheet INTRODUCTION SPECIFICATIONS PHYSICAL PROPERTIES HEAT TREATMENT HARDNESS
ATI 13-8 Supertough Alloy (UNS S13800) INTRODUCTION ATI 13-8 Supertough Alloy (UNS S13800) is a modification of the standard ATI 13-8 alloy, and has superior fracture toughness and Charpy impact energies,
Standard Specification for Tool Steels Alloy 1
Designation: A68 8 Standard Specification for Tool Steels Alloy This standard is issued under the fixed designation A68; the number immediately following the designation indicates the year of original
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 1
Designation: A 500 03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes This standard is issued under the fixed designation A 500; the number
C26000 CuZn30 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 (2.265) CW55A JIS C 26 BS CZ 16 UNS C26 (Cartridge brass, 7%) Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets
SECTION ORCHESTRA PIT FILLER
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Orchestra pit filler. 1.2 REFERENCES SECTION 11 61 00 ORCHESTRA PIT FILLER A. American Hardboard Association (AHA): 1. AHA A135.4-95: Basic Hardboard. B. American
Custom 450 Stainless Steel, UNS S45000
Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description
Copper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
(UNS N06600, N06601, N06603, N06690, N06693, N06025,
Designation: B 68 6 Used in USDOE-NE Standards Standard Specification Nickel-Chromium-Iron Alloys (UNS N66, N66, N66, N66, N66, N62, and N64) and Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N66) Plate,
Resource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
ITEM 442 METAL FOR STRUCTURES
ITEM 442 METAL FOR STRUCTURES 442.1. Description. This Item shall govern for all structural steel, high strength bolts, forgings, steel castings, iron castings, wrought iron, bronze, steel pipe and tubing,
Item 442 Metal for Structures
Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire 1
Designation: B 473 96 (Reapproved 2002) e Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire This standard is issued under the fixed designation B 473; the number
ลวดเช อมพ เศษ. Weld Mold / USA. Tool and Die Alloy Welding Materials
ลวดเช อมพ เศษ Weld Mold / USA Tool and Die Alloy Welding Materials High-strength alloys for bearing surfaces and tools that must work-harden, for the joining of cracked die sections and for applications
1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the
1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the people. 5. Technological vanguard for the industry. 6. Measurement
Copper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
For more information call (800) Materials Services Copper and Brass Sales. Stainless Steel
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Stainless Steel Service You Can Count On. At thyssenkrupp Materials NA, Copper and Brass Sales, we're committed to being
HAYNES Ti-3Al-2.5V alloy
HAYNES Ti-3Al-2.5V alloy Principal Features Lightweight, High Strength HAYNES Ti-3Al-2.5V alloy (UNS R56320) is both lightweight and strong. It has a high strength-to-weight ratio which provides a major