DVS Technical Codes on Plastics Joining Technologies - Selected Translations

Size: px
Start display at page:

Download "DVS Technical Codes on Plastics Joining Technologies - Selected Translations"

Transcription

1 English Edition 3 DVS Technical Codes on Plastics Joining Technologies - Selected Translations English Edition Volume 3 von DVS DVS e.v 1. Auflage DVS Technical Codes on Plastics Joining Technologies - Selected Translations DVS e.v schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG Thematische Gliederung: Werkstoffkunde, Materialwissenschaft: Forschungsmethoden DVS - Verlag für Schweißen und verwandte Verfahren, Düsseldorf 2008 Verlag C.H. Beck im Internet: ISBN

2 DVS Technical Codes on Plastics Joining Technologies Selected Translations Elaborated by Working Group W4 Welding of Plastics of the Technical Committee of the German Welding Society DVS

3 DVS-Technical Codes and Bulletins ( ) Testing of semi-finished products of thermoplastics Bases indications... 1 Supplement 3 Supplement 4 Supplement 5 ( ) Testing of semi-finished products made of thermoplastics; Basics indications Material and abbreviation... 5 ( ) Testing of semi-finished products made of thermoplastics; Basics indications Directives for creep rupture curves of pipes... 6 ( ) Testing of semi-finished products made of thermoplastics; Basics indications Linear thermal expansion coefficients... 7 ( ) Testing of semi-finished products made of thermoplastics; Basics indications Dimension stability ofsemi-finished material after heating... 8 ( ) draft Service life temperature time limits due to thermal ageing... 9 DVS ( ) Testingofsemi-finished products of thermoplastics: Weldability Test methods Requirements DVS ( )* Imperfections in thermoplastic welding joints Features, descriptions, evaluation DVS ( ) Testing of welded joints of thermoplastic sheets and pipes Test methods Requirements DVS DVS DVS Supplement 3 DVS Supplement 4 ( )* Testing of welded joints between panels and pipes made of thermoplastics, Requirements in the tensile test Short-time tensile welding factor f z ( )* Testing ofwelded joints between panels and pipes made of thermoplastics, Requirements in the tensile creep test, (Tensile creep welding factor f s ) ( ) Testing of welded joints of thermoplastic sheets and pipes Requirements Technological bend test Bend angle/ram displacement ( )* Testing of welded joints between panels and pipes made of thermoplastics Requirements onshear and peeling tests for sleeve welding with an incorporated electric heating element (HM) and heated tool sleeve welding (HD) on pipes and fittings DVS ( ) Testing of welded joints of thermoplastics materials Tensile test V

4 DVS ( ) Testing of welded joints of thermoplastics plates and tubes Tensile creep test DVS DVS ( ) Testing of welded joints of thermoplastic sheets and pipes Tensile creep test Testing of socket joints ( ) Testing of welded joints of thermoplastic sheets and pipes Tensile creep test Testing of the resistance to slow crack growth using the Full Notch Creep Test (FNCT) DVS ( ) Testing of welded joints of thermoplastics plates and tubes Technological bend test DVS ( )* Testing of joints between polymeric materials Shear and peeling tests DVS ( )* Testing of joints between polymeric materials Torsion shear and radial peeling tests for joints executed by means of sleeve welding with an incorporated electric heating element and heated tool sleeve welding ( ) Design calculations for containers and apparatus made from thermoplastics Characteristic Values Supplement 3 Supplement 4 Supplement 6 Supplement 7 Supplement 8 1 ( ) Design calculations for containers and apparatus made made from PP Type ( ) Design calculations for containers and apparatus made made from PP Type ( ) Design calculations for containers and apparatus made made from PP Type ( ) Design calculations for containers and apparatus made made from PVDF ( ) Design calculations for containers and apparatus made made from PE ( ) Design calculations for containers and apparatus made made from PE ( ) Design calculations for containers and apparatus made made from PE ( ) Design calculations for containers and apparatus made from thermoplastics Creep rupture curves for pipes made from PVC-C VI

5 2 ( ) Design calculations for containers and apparatus made from thermoplastics Creep rupture curves for fittings made from PVC-C DVS ( )* Calculation of tanks and apparatus made of thermoplastics Vertical round, non-pressurised tanks DVS DVS DVS Supplement 3 DVS Supplement 6 ( )* Calculation of tanks and apparatus made of thermoplastics Welded stationary tanks in the case of installation in buildings ( )* Calculation of tanks and apparatus made of thermoplastics Vertical round, non-pressurised tanks Collecting devices ( )* Calculation of tanks and apparatus made of thermoplastics Vertical round, non-pressurised tanks Flat roofs ( )* draft Calculation oftanks and apparatus made of thermoplastics Vertical round, non-pressurised tanks Shell construction method DVS ( ) Design of thermoplastic tanks and apparatuses Welded joints DVS ( ) Calculation ofthermoplastic tanks and apparatus Flanged joints DVS Supplement ( ) Calculation of thermoplastic tanks and apparatus Welded flanges, welded collars Constructive details DVS ( ) Calculation of thermoplastic tanks and apparatus Rectangular Tanks DVS Supplement ( ) Calculation of thermoplastic tanks and apparatus Rectangular tanks, structural details DVS ( )* Welding of thermoplastics Heated tool welding of pipes, pipeline components and sheets made of PE-HD DVS ( )* Welding of thermoplastics Heated tool welding of pipes made of PE-Xa with pipeline components made of PE-HD DVS ( )* Welding of thermoplastics Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets Methods, requirements DVS ( )* Welding ofthermoplastics Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets Requirements for welding equipment and accessories DVS ( )* Welding of thermoplastics Extrusion welding of pipes, piping parts and panels Processes and requirements VII

6 DVS ( )* Welding of thermoplastics Extrusion welding of pipes, piping parts and panels Requirements onthe welding machines and welding devices DVS ( ) Welding of thermoplastics Welding of PE casing pipes Tubes and tubular components DVS ( ) Welding of thermoplastics Welding of PE casing pipes Fittings and isolating valves DVS ( ) Welding of thermoplastics Non-contact heated tool butt welding of pipes, pipeline components and sheets Methods, equipment, parameters DVS ( )* Welding of thermoplastics Heated tool welding of pipes, piping parts and panels made of PP DVS ( )* Welding of thermoplastics Heated tool welding of pipes, piping parts and panels made of PVC-U DVS ( )* Welding of thermoplastics Heated tool welding of pipes, piping parts and panels made of PVDF DVS ( ) Welding of thermoplastic Heated tool butt welding Welding of casement sections made from PVC-U DVS ( ) Welding of thermoplastics Machines and devices for the heated tool welding of pipes, piping parts and panels DVS 2211 ( )* Welding of thermoplastics Welding fillers Marking, requirements and tests DVS ( )* Qualification testing of plastics welders Qualification Test Groups Iand II Hot gas welding with the torch separate from the filler rod (WF), highspeed hot gas welding (WZ), heated tool butt welding (HS), sleeve welding with an incorporated electric heating element (HM), heated tool sleeve welding (HD) and hot gas extrusion welding (WE) DVS ( )* Qualification testing of plastics welders Qualification Test Groups Iand II Planned monitoring ofthe certified plastics welders according to DVS DVS ( ) Testing of plastics welders Examination Group III Lining membranes in geotechnical and hydraulic engineering DVS 2213 ( ) Specialist for plastics welding Examination DVS 2214 ( ) Regulations for the examination of the specialist for plastics welding DVS ( ) Hot plate welding of mouldings made from thermoplastics in volume production VIII

7 DVS ( ) Hot plate welding of mouldings made of polyolefins (PE, PP) in volume production DVS ( ) Hot plate welding of mouldings made from amorphous thermoplastics in volume production DVS ( ) Hot plate welding of mouldings made from amorphous thermoplastics in volume production Welding parameters for amorphous thermoplastics and blends DVS ( )* Ultrasonic welding of plastic series parts Process description, machines and devices, influencing variables, design and quality assurance DVS ( )* DVS test specimens with an energy director for the ultrasonic welding of thermoplastics and testing conditions DVS ( ) Ultrasonic joining of moulded parts and semi-finished parts of thermoplastic polymers inmass production Forming with ultrasonic; staking, swaging and tamping DVS ( ) Ultrasonic joining of moulded parts and semi-finished parts of thermoplastic polymers in mass production Insertion of metal parts and other materials with ultrasonic DVS ( ) Ultrasonic joining of moulded parts produced of thermoplastic polymers in mass production, manufacture of horns DVS ( )* Ultrasonic joining ofmouldings and semi-finished products made of amorphous thermoplastics in series fabrication DVS ( ) Vibration welding of mouldings and semi-finished products made of thermoplastic polymers in series production DVS ( ) Vibration welding of mouldings and semi-finished products made of thermoplastic polymers in series production: Mouldings made of polyamides DVS ( )* Welding of thermoplastics in series fabrication Rotational friction welding of mouldings made of polyolefins (PE and PP) DVS ( )* Welding of thermoplastics in series fabrication Rotational friction welding of mouldings and semifinished products made of polyamides (PAs) DVS ( )* High-frequency joining of thermoplastics in series fabrication DVS ( )* Thermocontact welding of thermoplastic films (polyolefins) IX

8 DVS ( ) Joining of Lining Membranes made from Polymeric Materials (Geomembranes) in Geotechnical and Hydraulic Application Welding, Bonding by Adhesives, Vulcanising DVS ( ) Joining of lining membranes Made of polymer materials in geotechnical and hydraulic engineering Site testing DVS ( )* Welding of sealing sheets made of polyethylene (PE) for the sealing of dumps and contaminated sites DVS ( ) Testing of fused joints on liners of polymer materials Testing procedure, requirements DVS ( ) Testing of fused joints on liners of polymer materials Lap shear test DVS ( ) Test of fusions on PE liners Peeling test DVS ( ) Testing of fused joints on liners of polymer materials Tensile creep test on PE DVS ( )* Welding of semi-finished products made of high-density polyethylene (PE-HD) for the sealing of concrete structures in the field of ground water protection and for corrosion protection DVS 2231 ( )* Above-ground tanks, apparatus and piping made of thermoplastics Guide to quality assurance DVS ( )* Thread inserts for the joining ofmouldings made of plastics DVS ( )* Direct screwing into mouldings made of plastics DVS ( )* Examples Direct screwing of mouldings made of plastics and additional elements for thin-walled components List of further technical codes The dates indicated are the publication dates of the German editions. *Publication date of the English edition differs from the German edition X

DVS Technical - Codes and Bulletins. Table of Contents

DVS Technical - Codes and Bulletins. Table of Contents (1989-02) Testing of semi-finished products of thermoplastics Bases indications... 1 Supplement 4 Supplement 5 thermoplastics; Basics indications Material and abbreviation.. 5 thermoplastics; Basics indications

More information

Publishing Programme. Books Dictionaries Digital Products Technical Bulletins Technical Codes Magazines.

Publishing Programme. Books Dictionaries Digital Products Technical Bulletins Technical Codes Magazines. Publishing Programme Books Dictionaries Digital Products Technical Bulletins Technical Codes Magazines www.dvs-media.eu DVS Media GmbH Technical literature of welding - knowledge transfer in highest quality

More information

Handbook on the Ultrasonic Examination of Austenitic and Dissimilar Welds

Handbook on the Ultrasonic Examination of Austenitic and Dissimilar Welds Handbook on the Ultrasonic Examination of Austenitic and Dissimilar Welds DGZfP-Band überarbeitet Handbook on the Ultrasonic Examination of Austenitic and Dissimilar Welds schnell und portofrei erhältlich

More information

Canadian Standards Association Thermoplastic pressure piping compendium

Canadian Standards Association Thermoplastic pressure piping compendium Contents Technical Committee on Plastic Pressure Piping xx Preface xxiii Foreword xxv B137.0-05, Definitions, general requirements, and methods of testing for thermoplastic pressure piping 1 Scope 3 2

More information

Thermoplastic Welding. Udo Wagner Wegener GmbH, Aachen/Germany

Thermoplastic Welding. Udo Wagner Wegener GmbH, Aachen/Germany Thermoplastic Welding Udo Wagner Wegener GmbH, Aachen/Germany Thermoplastic Materials in Industrial Applications Storage and processing tanks Dual laminate construction Concrete protective liners Ventilation

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-31527-6 SOUTH AFRICAN NATIONAL STANDARD Welding of thermoplastics Testing and approval of welders WARNING This document references other documents normatively. Published by SABS Standards

More information

AWS G1.1M/G1.1:2006 An American National Standard. Guide to Ultrasonic Assembly of Thermoplastics

AWS G1.1M/G1.1:2006 An American National Standard. Guide to Ultrasonic Assembly of Thermoplastics An American National Standard Guide to Ultrasonic Assembly of Thermoplastics An American National Standard Approved by the American National Standards Institute July 6, 2006 Guide to Ultrasonic Assembly

More information

Specification for Welding Procedure and Performance Qualification for Thermoplastics

Specification for Welding Procedure and Performance Qualification for Thermoplastics An American National Standard Approved by the American National Standards Institute February 16, 2006 Specification for Welding Procedure and Performance Qualification for Thermoplastics 1st Edition Prepared

More information

SEMI-FINISHED PRODUCTS

SEMI-FINISHED PRODUCTS SEMI-FINISHED PRODUCTS Sheets, Round Bars, Welding Rods For more information about Agru America and our products, visit agruamerica.com Worldwide Excellence in Plastics and Geosynthetics Agru America is

More information

Thermoplastics Welding in Industrial Fabrication (Overview)

Thermoplastics Welding in Industrial Fabrication (Overview) Thermoplastics Welding in Industrial Fabrication (Overview) Scope The use of thermoplastic materials is not well known in the world of fabricated products. While thermoplastics may have limitations with

More information

TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY. UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson

TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY. UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson PLASTIC PIPE DESIGN AND LIMITATIONS 2 DESIGN FORMULA PD = 2 x S x (DF) SDR

More information

Engineering. Composiies. CRC Press. Taylor & Francis Croup. Boca Raton London New York. CRC Press is an imprint of the

Engineering. Composiies. CRC Press. Taylor & Francis Croup. Boca Raton London New York. CRC Press is an imprint of the Engineering Design with Polymers and Composiies Second Edition lames G. Gerdeen, PhD, PE Ronald A. L. Rorrer, PhD, PE CRC Press Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint

More information

MICROBAC LABORATORIES, INC BOULDER DIVISION 4750 Nautilus Court South, Unit A Boulder, CO Whitney Griebel Phone: MECHANICAL

MICROBAC LABORATORIES, INC BOULDER DIVISION 4750 Nautilus Court South, Unit A Boulder, CO Whitney Griebel Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROBAC LABORATORIES, INC BOULDER DIVISION 4750 Nautilus Court South, Unit A Boulder, CO 80301 Whitney Griebel Phone: 720 406 4800 MECHANICAL Valid To: June

More information

TEMPERATURE----PRESSURE----TIME

TEMPERATURE----PRESSURE----TIME Basic welding Principles In order to produce a high quality weld three perimeters must be controlled, they are: TEMPERATURE----PRESSURE----TIME The temperature must be controlled within the specified range

More information

Large plastic pipe technology. Large diameter pressure pipe. up to DN/ID 5000 mm

Large plastic pipe technology. Large diameter pressure pipe. up to DN/ID 5000 mm Large plastic pipe technology Large diameter pressure pipe up to DN/ID 5000 mm Powerful and designed according to YOUR specifications Large diameter pressure pipes No sagging and less wallthickness saves

More information

Accredited Laboratory

Accredited Laboratory Accredited Laboratory A2LA has accredited MICROBAC LABORATORIES, INC BOULDER DIVISION Boulder, CO for technical competence in the field of Mechanical ing This laboratory is accredited in accordance with

More information

Roll Bonding or Roll Welding

Roll Bonding or Roll Welding 1 2 3 4 Roll Bonding or Roll Welding The pressure required for welding is applied through a pair of rolls Can be performed hot (Hot Roll Bonding) Surface preparation is important for interfacial bonding

More information

Forming - Bulk Forming

Forming - Bulk Forming Forming - Bulk Forming Manufacturing Technology II Lecture 4 Laboratory for Machine Tools and Production Engineering Chair of Manufacturing Technologies Prof. Dr.-Ing. Dr.-Ing. E. h. F. Klocke Outline

More information

Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology

Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology Michael J. Johnston, Dukane Corporation As the uses for Wood Plastic Composites

More information

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &

More information

Introduction: Standard Plastic Terminology Plastic Program Analysis and Development p. 1 Selecting the Design Team for Success p. 3 Using Checklists

Introduction: Standard Plastic Terminology Plastic Program Analysis and Development p. 1 Selecting the Design Team for Success p. 3 Using Checklists Preface p. xv Introduction: Standard Plastic Terminology p. xix Plastic Program Analysis and Development p. 1 Selecting the Design Team for Success p. 3 Using Checklists to Develop Product Requirements

More information

MANUFACTURING TECHNOLOGY - I UNIT-1 TWO MARKS

MANUFACTURING TECHNOLOGY - I UNIT-1 TWO MARKS MANUFACTURING TECHNOLOGY - I UNIT-1 TWO MARKS 1. Define foundry? 2. Define casting. 3. Define mould. 4. Define pattern 5. Name the various pattern materials? 6. How is distortion allowances is made on

More information

Solid-State Welding Processes. Solid State Bonding 12/2/2009. Cold Welding

Solid-State Welding Processes. Solid State Bonding 12/2/2009. Cold Welding Solid-State Welding Processes Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Joining takes place without fusion at the

More information

Characteristics. PE-GFR pressure pipes

Characteristics. PE-GFR pressure pipes Characteristics PE-GFR pressure pipes Krah pressure pipe system (KPPS) Polyethylene (PE) pressure pipes have been used for water transportation for several decades. Their penetration in the market of plastics

More information

U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration Plastic Pipe

U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration Plastic Pipe Plastic Pipe Materials, Joining, Installation, & Other Considerations Some of the pipe that you may see? Around the late 1950 s to early 2000 s Thermoplastics Plastic Materials Must Meet: ASTM D-2513 (Thermoplastic)

More information

Solid-State Welding Processes

Solid-State Welding Processes Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Solid-State State Welding Processes Joining takes place without fusion

More information

METROPOLITAN. O & M Procedure No: E UTILITIES DISTRICT I. GENERAL

METROPOLITAN. O & M Procedure No: E UTILITIES DISTRICT I. GENERAL Page: 1 of 10 I. GENERAL * Before any welder may weld on the Metropolitan Utilities District gas distribution and transmission system piping and facilities, the welder shall be qualified to perform the

More information

Ultrasonic sealing of packaging films - influencing material properties

Ultrasonic sealing of packaging films - influencing material properties Ultrasonic sealing of packaging films - influencing material properties Karsten Thürling a, Sascha Bach b a Fraunhofer Application Centre for Processing Machinery and Packaging Technology, Dresden, Germany

More information

Table of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN:

Table of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN: Table of Contents Robert A. Malloy Plastic Part Design for Injection Molding An Introduction ISBN: 978-3-446-40468-7 For further information and order see http://www.hanser.de/978-3-446-40468-7 or contact

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 21809-3 Second edition 2016-03-01 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field

More information

Specifications for Concrete Embedment Liner

Specifications for Concrete Embedment Liner Specifications for Concrete Embedment Liner Part 1: GENERAL 1.01 SECTION INCLUDES A. Specifications and guidelines for MANUFACTURING high-density polyethylene embedment liners. 1.02 REFERENCES A. American

More information

Contents EN 14015:2004 (E) page

Contents EN 14015:2004 (E) page Contents page Foreword... 11 1 Scope... 12 2 Normative references... 13 3 Terms, definitions, symbols and abbreviations... 15 3.1 Terms and definitions... 15 3.2 Symbols... 19 3.3 Abbreviations... 21 4

More information

ASME B31.3 Process Piping

ASME B31.3 Process Piping ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)

More information

Large polyethylene pipes

Large polyethylene pipes Large polyethylene pipes Krah pipes for pressure application Krah-Pipes are large polyolefin pipes up to an internal diameter of 4000mm and a maximum solid wall thickness of 200mm. The preferred jointing

More information

TECHNO GROUP TECHNO PLAST. TECHNO PLAST : Pipe Extrusion manufacturer. TECHNO FIT : Injection moulding manufacturer

TECHNO GROUP TECHNO PLAST. TECHNO PLAST : Pipe Extrusion manufacturer. TECHNO FIT : Injection moulding manufacturer TECHNO GROUP TECHNO PLAST : Pipe Extrusion manufacturer TECHNO FIT : Injection moulding manufacturer TECHNO ALIMCO : Blow Moulding manufacturer TECHNO COR : Corrugated Pipe manufacturer TECHNO THERM :

More information

POWER PIPING J\$ME TO ASME B3I.I THE COMPLETE GUIDE. Charles Becht IV PRESS

POWER PIPING J\$ME TO ASME B3I.I THE COMPLETE GUIDE. Charles Becht IV PRESS POWER PIPING THE COMPLETE GUIDE TO ASME B3I.I by Charles Becht IV J\$ME PRESS Contents About the Author List of Figures List of Tables iii ix xi Chapter 1 Background and General Information 1 1.1 History

More information

OIL TECH SERVICES, INC.

OIL TECH SERVICES, INC. OIL TECH SERVICES, INC. 800 Wilcrest, Suite 100 Houston, TX 77042-1359 (310)-527-2695 (713) 789-5144 E Mail: mlombard@itmreps.com Website: www.itmreps.com WELDING Weld Procedure Specifications (WPS): Welding

More information

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS p 1 of 6 UF-1 UF-12 PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGING the test temperature be higher than 20 F ( 29 C). Certification is required. An ultrasonic examination shall be made

More information

SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE

SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE SECTION 15000 MECHANICAL 1. GENERAL 1.1 This specification shall govern the materials and installation of polyethylene dual contained system of pipe, structures

More information

Draft for comments only Not to be cited as East African Standard

Draft for comments only Not to be cited as East African Standard CD/K/055-5:2009 ICS 23.040.20; 23.040.45; 91.140.60; 93.025 EAST AFRICAN STANDARD Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 5: Fitness purpose of the system EAST

More information

Comparison of BS and BS EN for steel materials

Comparison of BS and BS EN for steel materials Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of

More information

AWS B4.0:2007 An American National Standard. Standard Methods for Mechanical Testing of Welds

AWS B4.0:2007 An American National Standard. Standard Methods for Mechanical Testing of Welds An American National Standard Standard Methods for Mechanical Testing of Welds An American National Standard Approved by the American National Standards Institute May 2, 2007 Standard Methods for Mechanical

More information

Reinforced Thermoset Plastic Corrosion-Resistant Equipment

Reinforced Thermoset Plastic Corrosion-Resistant Equipment ASME RTP-1 2007 (Revision of ASME RTP-1 2005) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 Date of Issuance: April 9, 2008

More information

LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS

LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below

More information

DEUTSCHE NORM December 2000

DEUTSCHE NORM December 2000 DEUTSCHE NORM December 2000 Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 C { 30672

More information

A. Section Fire Procection, HVAC & Plumbing Penetration Firestopping. B. Section Interior Painting: Painting insulation jacket.

A. Section Fire Procection, HVAC & Plumbing Penetration Firestopping. B. Section Interior Painting: Painting insulation jacket. SECTION 230719 - HVAC PIPING INSULATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Piping insulation. B. Jackets and accessories. 1.2 RELATED REQUIREMENTS A. Section 07813 - Fire Procection, HVAC & Plumbing

More information

Ultrasonic welding Eastman polymers

Ultrasonic welding Eastman polymers Ultrasonic welding Eastman polymers Ultrasonic welding Ultrasonic welding is a common method for joining plastic parts without using adhesives, solvents, or mechanical fasteners. Ultrasonic welding equipment

More information

German Corporate Governance in International and European Context

German Corporate Governance in International and European Context German Corporate Governance in International and European Context von Jean J. du Plessis, Bernhard Großfeld, Claus Luttermann, Ingo Saenger, Otto Sandrock 1. Auflage 2007 German Corporate Governance in

More information

introduction Introduction.1 contents Irrigation Warehouse Group Pty Ltd Ph

introduction Introduction.1 contents Irrigation Warehouse Group Pty Ltd  Ph contents Vinidex the Company 3 Quality Policy 3 Product Background 4 Worldwide Use 4 Australian Use 4 Pipe Extrusion 5 Fittings 6 End Treatments 6 Product Standards 7 Relevant Australian Standards 7 Introduction.1

More information

Casting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.

Casting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining. Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of

More information

GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS

GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS - June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS

More information

file : pdf, 8.01 mb, 535 pages download : toc

file : pdf, 8.01 mb, 535 pages download :   toc file : pdf, 8.01 mb, 535 pages download : http://artikel-software.com/blog toc chapter 1 features and benefits of hdpe pipe ductility visco-elasticity summary references chapter 2 inspections, tests and

More information

Torsion and Shear Stresses in Ships

Torsion and Shear Stresses in Ships Torsion and Shear Stresses in Ships Bearbeitet von Mohamed Shama 1st Edition. 2010. Buch. xxv, 277 S. Hardcover ISBN 978 3 642 14632 9 Format (B x L): 15,5 x 23,5 cm Gewicht: 1330 g Weitere Fachgebiete

More information

Materials & Processes in Manufacturing

Materials & Processes in Manufacturing Materials & Processes in Manufacturing ME 151 Chapter 18 Hot Working Processes 1 Introduction Forming of materials their recrystallization temperature Higher temperatures weaken the metal making it more

More information

HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER

HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER That generally cohesive bulk materials do not flow easily in chutes and hoppers. Changes in moisture and particle size affect the products flowability.

More information

Ø mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001

Ø mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001 Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...

More information

Review of ASME Guidance Articles on Repair Strategies

Review of ASME Guidance Articles on Repair Strategies Review of ASME Guidance Articles on Repair Strategies Clay Rodery BP Chemicals Technology & Engineering Member/ASME Post Construction Standards Committee ASME PCC-2: Repair of Pressure Equipment and Piping

More information

SAMPLE SPECIFICATION for HIGH DENSITY POLYETHYLENE PIPING LEACHATE COLLECTION SYSTEMS

SAMPLE SPECIFICATION for HIGH DENSITY POLYETHYLENE PIPING LEACHATE COLLECTION SYSTEMS ISCO INDUSTRIES, LLC SAMPLE SPECIFICATION for HIGH DENSITY POLYETHYLENE PIPING LEACHATE COLLECTION SYSTEMS 1. GENERAL This specification shall govern the materials and installation of high density polyethylene

More information

HDPE Geomembranes in Geotechnics

HDPE Geomembranes in Geotechnics HDPE Geomembranes in Geotechnics Bearbeitet von Werner W Müller 1. Auflage 2006. Buch. xviii, 485 S. Hardcover ISBN 978 3 540 37286 8 Format (B x L): 15,5 x 23,5 cm Gewicht: 914 g Weitere Fachgebiete >

More information

STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL

STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL BOMBAY TEXTILE RESEARCH ASSOCIATION L.B.S.MARG, GHATKOPAR (W),MUMBAI-400086. WEB : btraindia.com e-mail : btra@vsnl.com What are Standards? Standards are published

More information

HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS

HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS Stephen Beech - SHB Consulting, UK Johannes Grieser - Hessel Ingenieurtechnik GmbH, DE David Lowe - Exova Polymer, UK Philippe

More information

Report for Handbook on large plastic pipes, published 2015, ISBN

Report for Handbook on large plastic pipes, published 2015, ISBN Relining with large diameter Polyethylene Pipes Damaged and leaky pipes made out o concrete, GRP, steel, ductile iron can be relined and renovated with Proiled Polyethylene Pipes in almost every diameter.

More information

Sure-Grip System. A System with Benefits. Concrete Protection

Sure-Grip System. A System with Benefits. Concrete Protection Concrete Protection Concrete Protection The Sure-Grip concrete protective liner system, developed and patented by Agru, is a high-quality innovative solution for the long-term protection of concrete structures.

More information

PE pressure pipes made from PE 100-RC

PE pressure pipes made from PE 100-RC PE pressure pipes made from PE 100-RC Design and calculation of gas- or water pipelines for a minimum service life of 100 years Dipl.-Ing. Sven Nonhoff Dr.-Ing. Joachim Hessel GmbH 1 GmbH We offer SOLUTIONS

More information

Welding. work.info Welding 10/2017 1

Welding. work.info Welding 10/2017 1 work.info Welding work.info Welding 10/2017 1 Contents 1 Foreword 3 2 Hot-gas welding 4 2.1 Workplace 4 2.2 Weld seam preparation 4 2.3 Welding process 4 2.4 Welding defects 6 2.5 Rework on the weld seam

More information

The First Choice Globally.

The First Choice Globally. The First Choice Globally www.weldmaster.com The First Choice Globally of All Industrial Fabric Welding Solutions 2 A History of Forging New Frontiers in Hot Air Welding For four decades, Miller Weldmaster

More information

Smooth Liner THE MATERIAL OF CHOICE FOR CONTAINMENT APPLICATIONS

Smooth Liner THE MATERIAL OF CHOICE FOR CONTAINMENT APPLICATIONS Smooth Liner THE MATERIAL OF CHOICE FOR CONTAINMENT APPLICATIONS 1 The Plastics Experts. AGRU geosynthetic liners are manufactured with only the highest-grade polyethylene resins using the calendared flat-die

More information

EEMUA Publication Construction specification for fixed offshore structures

EEMUA Publication Construction specification for fixed offshore structures Contents Preface... iv Principal changes in the 3 rd Edition... 1 1 Introduction and objectives... 3 1.1 Scope... 3 1.2 Definitions... 3 1.3 Abbreviations... 4 1.4 Units... 6 1.5 Glossary of technical

More information

ASTM Standards for Pipe & Fittings

ASTM Standards for Pipe & Fittings for Pipe & Fittings There are many International Standards for stainless and carbon steel pipes and fittings. The list below is a basic overview of some of these. For more in-depth details of these Standards

More information

TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE

TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot

More information

Chapter 31. Solid-State Welding Processes

Chapter 31. Solid-State Welding Processes Chapter 31 Solid-State Welding Processes Roll Bonding Figure 31.1 Schematic illustration of the roll bonding or cladding process. Ultrasonic Welding Figure 31.2 (a) Components of an ultrasonic welding

More information

VPAR Instruction Brochure Rev. B, June 11, 2003

VPAR Instruction Brochure Rev. B, June 11, 2003 1. Purpose The purpose of this document is to provide guidance and information to supplement and clarify the requirements of welding procedure qualification specifications PPD 803-6335695 and S9074-AQ-

More information

Specialists in P.T.F.E

Specialists in P.T.F.E FILMS AND SHEET EXTRUDED AND MOULDED MACHINED COMPONENTS Founded as a family business in 1955, Dalau has grown to become the largest polytetrafluoroethylene (PTFE) processor in the United Kingdom and now

More information

HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS FINAL CONCLUSIONS

HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS FINAL CONCLUSIONS HARMONISATION OF POLYETHYLENE PIPE BUTTFUSION PROCEDURES AND TEST METHODS FINAL CONCLUSIONS Stephen Beech - SHB Consulting, UK Christophe Salles PE 100+ Association, FR Ulrich Schulte PE 100+ Association,

More information

Multiphase Flow Dynamics 4

Multiphase Flow Dynamics 4 Multiphase Flow Dynamics 4 Nuclear Thermal Hydraulics von Nikolay I Kolev 1. Auflage Multiphase Flow Dynamics 4 Kolev schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG Thematische

More information

Reinforced Thermoset Plastic Corrosion-Resistant Equipment

Reinforced Thermoset Plastic Corrosion-Resistant Equipment ASME RTP-1 2013 (Revision of ASME RTP-1 2011) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD ASME RTP-1 2013 (Revision of ASME RTP-1 2011) Reinforced Thermoset

More information

PURETECH AP PURETECH HIGH PURITY PIPING SYSTEMS TECHNICAL GUIDE

PURETECH AP PURETECH HIGH PURITY PIPING SYSTEMS TECHNICAL GUIDE PURETECH AP TECHNICAL GUIDE For: Bio-Pharmaceutical Research & Development Laboratories Academic & University Facilities Hospital & Healthcare Facilities Industrial & Semiconductor Manufacturing PURETECH

More information

SARDAR RAJA COLLEGE OF ENGINEERING, ALANGULAM

SARDAR RAJA COLLEGE OF ENGINEERING, ALANGULAM SARDAR RAJA COLLEGE OF ENGINEERING, ALANGULAM DEPARTMENT OF MECHANICAL ENGINEERING MICRO LESSON PLAN SUBJECT : MANUFACTURING TECHNOLOGY I CODE : ME 2201 CLASS : II Year / III SEM DEPT. OF MECHANICAL ENGG.

More information

AGRU Specialized Geomembranes COEXTRUDED BLACK/WHITE AND CONDUCTIVE GEOMEMBRANE LINERS

AGRU Specialized Geomembranes COEXTRUDED BLACK/WHITE AND CONDUCTIVE GEOMEMBRANE LINERS AGRU Specialized Geomembranes COEXTRUDED BLACK/WHITE AND CONDUCTIVE GEOMEMBRANE LINERS 1 The Plastics Experts. AGRU geosynthetic liners are manufactured with only the highest-grade polyethylene resins

More information

INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS

INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS EN INDUSTRIAL PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS The Plastics Experts. AGRU Kunstofftechnik GmbH is a family-owed, highly productive enterprise,

More information

Test Charges (Rs.) per Sample GEOTEXTILES

Test Charges (Rs.) per Sample GEOTEXTILES GEOTEXTILES 28) I. WOVEN GEO-FABRICS Mass per square metre [ASTM D: 5261 / ASTM D: 3776 / ISO: 9864 / IS: 14716] 1 m 2 500 29) Tensile Strength & Elongation (Warp and Weft) [ASTM D: 5035 / IS: 1969] 1

More information

Industrial Piping Systems

Industrial Piping Systems Industrial Piping Systems Single Wall Piping System Double Wall Piping System Chem Proline Single Wall Piping Chem Prolok Double Wall Piping Systems 10-2012 Chemical Piping Solutions Asahi/America in cooperation

More information

How properties of thermoplastics are affected by processing.

How properties of thermoplastics are affected by processing. How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation

More information

Wide applications of plastics

Wide applications of plastics Order of Engineers and Architects Beirut Lebanon Wide applications of plastics By: Mr. Barry Lemon Technical support manager Georg Fischer piping system 1 17.12.2014 Industrial Piping Systems Thermoplastic

More information

ITEM 442 METAL FOR STRUCTURES

ITEM 442 METAL FOR STRUCTURES ITEM 442 METAL FOR STRUCTURES 442.1. Description. This Item shall govern for all structural steel, high strength bolts, forgings, steel castings, iron castings, wrought iron, bronze, steel pipe and tubing,

More information

Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW

Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW 1 The Plastics Experts. AGRU Pipe & Fitting Systems offer a complete range of high-quality pipes, fittings, valves and customized

More information

Chapter Outline. Joining Processes. Welding Processes. Oxyacetylene Welding. Fusion Welding Processes. Page 1. Welded Joints

Chapter Outline. Joining Processes. Welding Processes. Oxyacetylene Welding. Fusion Welding Processes. Page 1. Welded Joints Joining Processes Chapter Outline R. Jerz 1 4/16/2006 R. Jerz 2 4/16/2006 Welding Processes Welded Joints Gas, electricity, or other heat source? Is electrode consumed? Is a filler material used? Is flux

More information

Joining Processes R. Jerz

Joining Processes R. Jerz Joining Processes R. Jerz 1 4/16/2006 Chapter Outline R. Jerz 2 4/16/2006 Welding Processes Gas, electricity, or other heat source? Is electrode consumed? Is a filler material used? Is flux used? Anything

More information

SEMI- FINISHED PRODUCTS FOR EXTREME APPLICATIONS MADE FROM PE, PP, PVDF, ECTFE, FEP, PFA

SEMI- FINISHED PRODUCTS FOR EXTREME APPLICATIONS MADE FROM PE, PP, PVDF, ECTFE, FEP, PFA SEMI- FINISHED PRODUCTS FOR EXTREME APPLICATIONS MADE FROM PE, PP, PVDF, ECTFE, FEP, PFA 1 The Plastics Experts. The AGRU success story has been unfolding now for about seven decades. Founded in 1948 by

More information

Concrete Protection CONCRETE PROTECTIVE LINERS

Concrete Protection CONCRETE PROTECTIVE LINERS Concrete Protection CONCRETE PROTECTIVE LINERS EN Precast pipe with AGRU Sure Grip Sure Grip system The Sure Grip concrete protective liner system, developed and patented by AGRU, is a high-quality solution

More information

ECTFE System THE PREMIER LEAGUE

ECTFE System THE PREMIER LEAGUE ECTFE System THE PREMIER LEAGUE EN Products made of ECTFE PERFECT FOR HIGHEST REQUIREMENTS It would seem that perfection is attained not when no more can be added, but when no more can be removed. Antoine

More information

List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION

List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION EN 295-1 Part 1: Requirements for pipes, fittings and joints Vitrified

More information

PART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS

PART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS PART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS Presented by: Ed Soltow Engineering and Design Manager SGL Carbon Technic LLC Member ASME Standards Committee on Pressure Vessels (BPV VIII)

More information

Plastic Forming Processes

Plastic Forming Processes Plastic Forming Processes Plastic Forming Processes Maurice Reyne First published in France in 2006 by Hermes Science/Lavoisier entitled: Transformations, assemblages et traitements des plastiques First

More information

DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.

DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems. PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,

More information

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of

More information

CHAPTER 4. Design of Innovative Creep Testing Facility under Flowing. Sodium

CHAPTER 4. Design of Innovative Creep Testing Facility under Flowing. Sodium CHAPTER 4 Design of Innovative Creep Testing Facility under Flowing Sodium 4.1 Introduction In this chapter, design of an innovative creep testing system comprising of a lever arm type creep machine with

More information

ISO : (E)

ISO : (E) ISO 21809-3:2016-03 (E) Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transporta tion systems - Part 3: Field joint coatings Contents Page

More information

2018/10/22. NO-DIG Purpose Engineered Pipes International No-Dig Conference Cape Town International Convention Centre

2018/10/22. NO-DIG Purpose Engineered Pipes International No-Dig Conference Cape Town International Convention Centre INTERNATIONAL NO-DIG SOUTHAFRICA2018 NO-DIG Purpose Engineered Pipes International No-Dig Conference Cape Town International Convention Centre TT Techniques and HDPE PE100 Pipes o TT techniques: - HDPE

More information

ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1. Scope 1.1 This specification 2 covers wrought carbon steel and alloy steel fittings

More information