Copper & Copper Alloys CuNi1Si (OF 2403)
|
|
|
- Eunice Lang
- 6 years ago
- Views:
Transcription
1 Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014
2 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem Max Applications CuNi1Si is highly suitable for friction and wear applications. Parts which combine high static strength and fatigue strength even at elevated temperatures, e.g. in electronics or overhead traction line with reasonable electric and thermal conductivity are also made of CuNi1Si. CuNi1Si can be used for diamagnetic and paramagnetic applications. Another field of application is the use of parts made of CuNi2Si in corrosive environments. Examples of application: Electronics, e.g. connectors Overhead traction lines: clamps, screw nuts and screws Electric parts for use in corrosive environment Bushings Sliding and friction applications Diamagnetic and paramagnetic applications Maritime applications At room temperature Physical properties Density 8.9 g/cm 3 Electrical conductivity 18 (hardened) MS/m 31 (hardened) % I.A.C.S Heat conductivity (hardened) W/(m*K) Heat capacity 377 J/(kg*K) Coefficient of thermal expansion /K Young s modulus (hardened) GPa Melting range C CuNi1Si provides a homogeneous microstructure with a matrix of α-brass. In solution-treated condition, the matrix is oversaturated with Ni and Si. After hardening at elevated temperatures fine Ni-silicides are present. Structure Page 2 of 5 no responsibility is taken for the correctness of this information 04/2014
3 Consignment and measurements Strength conditions Norm/ DIN EN Condition Yield strength R p0.2 [MPa] Tensile strength R m [MPa] Elongation A [%] Brinell- Hardness HBW 2.5/ /12165/ 12167/12420 M ** ** ** ** 12163/12167 R / / R / / R / H050 / / / /12167 H120 / / / /12167 H140 / / / /12167 H160 / / / ** Condition M = without specified properties - as manufactured / No requirements in standard or not applicable DIN EN 12163: Bars, general purpose DIN EN 12165: Pre-material for forgings DIN EN 12167: Profiles, rectangular bars DIN EN 12420: Forgings Specified dimensions for bars, pre-material for forging and forgings R/V Rod/polygonal bar VS-R/V Pre-material for forging round/polygonal RS Rectangular bar Profiles and rectangular bars can be delivered up to 180 mm in extruded and up to 130 mm in cold drawn condition. Pre-material for forging and forgings is dependent upon each individual case. Page 3 of 5 no responsibility is taken for the correctness of this information 04/2014
4 Specified dimensions for hollow bars and round tubes Round tubes can be delivered up to 180 mm in extruded and up to 130 mm in cold drawn condition. Other consignments Rods and tubes in other strength and hardness conditions, and dimensions are available on request. Processing Shaping Machinability (hardened) poor (30) (CuZn39Pb3=100%) Cold working (solution treated) Hot working Hot working temperature C Connecting Resistance welding Shielded welding Brazing Soldering Surface treatment Mechanical polishing Electrolytic polishing Galvanisation Tin coated average average Solution annealing Soft annealing Hardening Heat treatment C C C Special notes and remarks CuNi1Si provides corrosion resistance in natural environment. Under atmospheric conditions CuNi1Si forms a protective oxide layer having a dark coloring. CuNi1Si in fully hardened condition has a reasonable persistence against stress corrosion cracking (SCC, in particular ammoniac atmosphere). There is a risk of corrosion cracking (SCC) in the presence of oxidising acids or wet sulphur. Page 4 of 5 no responsibility is taken for the correctness of this information 04/2014
5 Page 5 of 5 no responsibility is taken for the correctness of this information 04/2014
Copper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
Copper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
Copper & Copper Alloys
Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
Copper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
Copper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
UNS:C70250, C70320 EN:CW112C
Rendering date: 2018-02-01 13:53:55 http://conductivity-app.org CuNi3Si UNS:C70250, C70320 EN:CW112C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi3Si (SB26) KM Europa
C27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
C26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
C27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³
Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys
High Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³
Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &
High Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
CuSn0,5 UNS:C18835 EN:CW129C. Rendering date: :32:23
Rendering date: 2018-09-26 21:32:23 http://conductivity-app.org CuSn0,5 UNS:C18835 EN:CW129C CuSn(CuSn0,2 - CuSn0,5) material with 0,2-0,55% is tin addition id single phase copper alloy with good mechanical
C51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition Weight percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric &
C26800 CuZn33 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition percentage C268 Cu 67 % Zn Rest % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments
T :
Aluminium Stock www.cncdirect.co.nz T : +64 9 622 2169 www.highgrademetals.co.nz About CNC Direct Limited was established by David Thumath in 2007 to supply quality well priced machine tools into the New
Aircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
CuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition Weight percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
C22000 CuZn10 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 JIS BS CW501L Brass Rolled Products UNS Chemical Composition percentage C22000 Cu 90 % Zn Rest % This alloy is in accordance with RoHS 2002/96/CE for electric & electronic
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Copper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science
LEADED Red BRASS (85-5-5-5) C83600 Tensile Strength, Ksi 30 Tensile Strength, Mpa 207 Yield Strength, Ksi 14 Yield Strength, Mpa 97 Elongation in 2 inch 20 Density g/cm3 8.83 Electrical Conductivity IACS
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic
Stainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:
Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%)
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Cannot be strengthened (precipitation hardening) Strength can be increased only through cold-work Three main groups : 1xxx, 3xxx and 5xxx series
1. Aluminium (Al) Extremely useful engineering material o has low density (2.70 g/cm3) o good corrosion resistance in most natural environment o non-toxic : suitable for food containers and packaging o
Bronze Rolled Products. Characteristics
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW453K JIS C 5210 BS PB 104 UNS Chemical Composition Weight percentage Cu C52100 Rest Sn 8 % P 0.1 % This alloy is in accordance with RoHS 2002/96/CE
EOS Aluminium AlSi10Mg
is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data for parts built using powder (EOS art.-no. 9011-0024)
C26000 CuZn30 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 (2.265) CW55A JIS C 26 BS CZ 16 UNS C26 (Cartridge brass, 7%) Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets
Material designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3]
![Material designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3]](/thumbs/95/124417647.jpg "Material designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3]")
Material Data Sheet Aluminium alloy Materials Services Technology, Innovation & Sustainability Page 1/5 Material designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3] 3.3535 Scope This
Stainless Steel 310/310S (UNS S31000/ UNS S31008)
Stainless Steel 310/310S (UNS S31000/ UNS S31008) Austenitic Stainless Steel 310/310S offers excellent resistance to oxidation up to 2000oF. It is a low grade steel that prevents embrittlement and sensitization.
6026LF. Aluminium Alloy. by Eural. ELV Compliant. RoHS II Compliant. Actual and future revisions
6026LF Aluminium Alloy ELV RoHS II Actual and future revisions PRESENTATION 6026LF This innovative alloy has been conceived and developed in Eural Gnutti S.p.A. s research laboratories, in order to meet
BRODER METALS GROUP HTS 316
Broder Metals supply 316 and 316L stainless cold drawn in B8M Class 2, B8M Class 2B, A4-70 and A4-80. A4-70 and A4-80 are named by their minimum tensile strength to be met by the material (70 & 80) by
UNS:C70260, C64700 EN:CW111C
Rendering date: 2017-12-01 16:18:32 http://conductivity-app.org CuNi2Si UNS:C70260, C64700 EN:CW111C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi2Si (SB22) Wieland-Werke
Material Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
Characteristics. Current carrying Capacity. Density 8.85 g/cm³. Thermal expansion coefficient C /K
Alloy Designation STOL 94 High Performance STOL Alloys EN CuNi2,5SiZn DIN CEN/TS 13388 UNS Chemical Composition percentage Cu # Rest % Ni 1... 4. % Si.8.. 1. % Zn max. 2. % Sn max. 1. % Ag max..5 % Mg
Material data sheet. EOS Aluminium AlSi10Mg. Description
https://gpiprototype.com EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides
The lead-free machining brass
The lead-free machining brass Company profile The Wieland Group, with headquarters in the southern German city of Ulm, is one of the world s leading manufacturers of semi-finished and special products
EOS NickelAlloy IN718 for EOSINT M 270 Systems
EOS NickelAlloy IN718 for EOSINT M 270 Systems A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS NickelAlloy IN718
Specification Aluminium Die-Casting Alloy, high silicon content Aluminium Die-Casting Alloy, high silicon content
Specification 2012-10 Class: Aluminium and Al-alloys Class No.:21 Aluminium Die-Casting Alloy, high silicon content JED 853 Previous Edition Part name (for databases) 2011-11 Aluminium Die-Casting Alloy,
Material data sheet. EOS NickelAlloy HX. Description, application
EOS NickelAlloy HX EOS NickelAlloy HX is a heat and corrosion resistant metal alloy powder intended for processing on EOSINT M 280 systems. This document provides information and data for parts built using
VDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
Material data sheet. EOS NickelAlloy HX. Description, application
EOS NickelAlloy HX EOS NickelAlloy HX is a heat and corrosion resistant metal alloy powder intended for processing on EOS M systems. This document provides information and data for parts built using EOS
1.0 Introduction David Chapman
1. Introduction David Chapman 1.1. About this Guide Busbars are used within electrical installations for distributing power from a supply point to a number of output circuits. They may be used in a variety
Specification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
Hastelloy C-2000 (UNS N06200)
Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 is a versatile alloy that provides high resistance to variety of chemicals including sulfuric acid, hydrochloric acid and other strong acidic media. It offers
Technical Information
Technical Information Material Data Sheet Magnesium Mg KG High performance materials in form and function 2 Magnesium and Magnesium wrought alloys are the ideal material for extremely light components.
For more than 45 years, our company has been committed to providing the global distributors community with innovative, high quality, cost effective
Aluminium For more than 45 years, our company has been committed to providing the global distributors community with innovative, high quality, cost effective aluminium products. From our humble beginnings
ATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition.
ATI 418 SPL Stainless Steel (UNS S41800) GENERAL PROPERTIES ATI 418 SPL alloy (Greek Ascoloy) is a corrosion and heat resistant stainless steel similar in many respects to Type 410 but exhibiting improved
material specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
Material data sheet. EOS StainlessSteel 17-4 for EOSINT M 270. Description, application
EOS StainlessSteel 17-4 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS Stainless Steel 17-4 is
30ChGSA Included in 13 standards (CIS Countries)
Standards GOST 10702-78 GOST 11268-76 GOST 12132-66 GOST 21729-76 GOST 23270-89 GOST 4543-71 GOST 8731-74 GOST 8733-87 GOST R 54159-10 TU 14-1-1213-75 TU 14-1-1409-75 TU 14-1-4118-76 TU 14-4-385-73 Steel
VDM NeutroShield Data Sheet No. 4060
VDM NeutroShield Data Sheet No. 4060 December 2014 VDM NeutroShield Material Data Sheet No. 4060 VDM NeutroShield is an austenitic stainless steel which is alloyed with boron. Its chemical composition
ATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
Chapter 11 Part 2. Metals and Alloys
Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those
The fortress of honor with its production and of trust with its quality
The fortress of honor with its production and of trust with its quality www.sarbak.com.tr Sarbak Metal Our company will continue to exist as an internationally leading company with activities carried
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
Material data sheet. EOS NickelAlloy HX. Description, application
Material data sheet is a heat and corrosion resistant metal alloy powder intended for processing on EOS M 290 systems. This document provides information and data for parts built using powder (EOS art.-no.
Born from fire, made to endure NICKEL ALLOYS
Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster
EOS NickelAlloy IN718 is a heat and corrosion resistant nickel alloy powder which has been optimized
is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOS M systems. This document provides information and data for parts built using powder (EOS
Nickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
PERSENDA s.n.c MONCALIERI (IT)
s.n.c. 10024 - MONCALIERI (IT) www.paginegialle.it/persenda persenda@virgilio.it SOLID SOLDER WIRES DESCRIPTION: made in "ecological" alloys, free from Lead, have been formulated as a good alternative
ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys
ENGINEERING COPPER SOLUTIONS Connector Strip Materials Strips of copper and copper alloys Revision: 01 / 2015 Overview 1. KME Group 1.1. KME in short 1.2. Product portfolio 1.3. Production and sales locations
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION TS95 ISSUE 8 Issued UNKNOWN Revised 2004-06 Recommendations for Metallic Material Specifications and Standards to be Used for New Designs NOTE: The issue status of this document
STUDY OF HEAT TREATMENT INFLUENCE ON ALUMINUM -BASED ALLOY ATN-Si10Cu4
STUDY OF HEAT TREATMENT INFLUENCE ON ALUMINUM -BASED ALLOY ATN-Si10Cu4 Elisabeta VASILESCU, Simona BOICIUC Dunărea de Jos University of Galaţi email: elisabeta.vasilescu@yahoo.com ABSTRACT This work presents
ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
2.0 High Conductivity Copper
2.0 High Conductivity Copper The electrical properties of high conductivity copper were standardised in 1913 by the International Electrotechnical Commission which defined the International Annealed Copper
DAYE JINGCHENG MOULD CO., LTD TOOL STEEL PRODUCT
1.2343 Hot Work Tool Steel Identification Designation by Standards Mat. No. DIN EN AISI 1.2343 X38CrMoV51 X38CrMoV51 H11 Chemical Composition C Si Mn Cr Mo V P S 0.36 0.90 0.30 4.80 1.10 0.25 0.030 0.030
SANDVIK NANOFLEX STRIP STEEL
SANDVIK NANOFLEX STRIP STEEL DATASHEET Sandvik Nanoflex is a precipitation hardening, austenitic stainless steel specifically designed for applications requiring high strength and good ductility. Mechanical
TECHNICAL SPECIFICATION. No. TS95
TECHNICAL No. TS95 SAE ITC GUIDANCE FOR SELECTION OF METALLIC MATERIAL S & STANDARDS USED FOR NEW DESIGNS RATIONALE Ninth issue of Technical Spec. Spec format updated to SAE ITC standard, to allow use
Impact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
Brass Alloy SM Chemical Composition. Dimensions. Physical Properties. Technical Data Sheet Alloys. Density kg/m Melting temperature
Chemical Composition Comparable standards ISO: CuZn33 ASTM: UNS 26800 EU: CW 506L JIS: C2680 Element Unit Range Copper % 64-68.5 Lead % max. 0.05 Iron % max. 0.05 Zinc - remainder Dimensions Nominal width
It is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)
INVR CONTROLLED EXPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION Invar is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and
Material data sheet. EOS NickelAlloy IN718. Description
EOS NickelAlloy IN718 EOS NickelAlloy IN718 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
STANDARD SPECIFICATION
SPECIFICATION The products from Yieh will be strictly produced according to national or international standard, or sometimes to mutually agreed standard. CHINESE GB/T 5237 GB/T 6892 GB/T 6893 Aluminum
- HSS-Blade (EOS art.-no ) - 90 µm mesh for powder sieving recommended (EOS art.-no ) - Argon atmosphere
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is a aluminium metal alloy powder intended for processing on EOS DMLS systems. This document provides information and data for parts built using EOS Aluminium
Grade Etch color C Si Mn Cr Mo P S Ni. 416 Dark 0,22 <1 <1,25 13 <0,6 <0,06 0, Bright 0,23 <1 < <0,04 0,03 3
Stainless damascus barrel steel for rifles Damasteel s stainless Barrel steel is a RSP (Rapid Solidification Powder) based steel with AISI 416/431 as the constituent alloys. The steel is developed and
CHAPTER 5 WORKPIECE MATERIALS AND PARAMETERS FOR EXPERIMENT
71 CHAPTER 5 WORKPIECE MATERIALS AND PARAMETERS FOR EXPERIMENT 5.1 INTRODUCTION The workpiece materials for the experimental study are selected on the basis such that mathematical equations arrived at
Specification Stainless spring steel
Specification 218-6 Class: Semifinished Products of Steel Class No.:15 Stainless Spring Steel JED 5M Previous Edition Abbreviated Title 21-1 Stainless spring steel 852 5 4 1 Scope The specification refers
DISPAL The Combination of Properties
DISPAL The Combination of Properties DISPAL = low weight of Aluminum plus +...high strength (R m bis 750 MPa) +...improved fracture toughness (K IC up to max. 115 MPa m) +...high temperature strength (Rm=280
Hastelloy G-30 (UNS N06030) Chemical Composition
Hastelloy G-30 (UNS N06030) Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions. It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric
AFK 502 R AFK 1 AFK 18 Fe-Co SOFT MAGNETIC ALLOYS
AFK 502 R AFK 1 AFK 18 Fe-Co SOFT MAGNETIC ALLOYS I GENERAL ASPECTS The recent marked development of electrical engineering equipment has led to an increasing demand for the miniaturization of ancillary
Chapter 6. Copper and Copper Alloys. /MS371/ Structure and Properties of Engineering Alloys
Chapter 6 Copper and Copper Alloys Overview of copper alloys Main characteristics High electrical, ease of Relative electrical and thermal conductivities (at 20 o C) Overview of copper alloys Cu + Zn (
The fortress of honor with its production and of trust with its quality
The fortress of honor with its production and of trust with its quality www.sarbak.com Sarbak Metal Our company will continue to exist as an internationally leading company with activities carried out
INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)
INVR CONTROLLD XPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION INVR is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and
Chapter 6. Copper and Copper Alloys. /MS371/ Structure and Properties of Engineering Alloys
Chapter 6 Copper and Copper Alloys Overview of copper alloys Main characteristics High electrical, ease of Relative electrical and thermal conductivities (at 20 o C) Overview of copper alloys Cu + Zn (
Al-Si 590 Al 112 BAlSi-4 L-Al Si 12 B-Al88Si
HARASIL NC12 TBW TECHNICAL DATA SHEET 409B Seamless Flux Cored Brazing Wire for Aluminium Alloys Al-Si 590 Al 112 BAlSi-4 L-Al Si 12 B-Al88Si-575-585 - HARASIL NC 12 TBW Seamless tubular wire of AlSi12
Material data sheet - FlexLine. EOS Aluminium AlSi10Mg
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium metal alloy powder intended for processing on EOS DMLS systems. This document contains information and data for building parts using - EOS
ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys
ENGINEERING COPPER SOLUTIONS Connector Strip Materials Strips of copper and copper alloys Revision: 01 / 2015 Overview 1. KME Group 1.1. KME in short 1.2. Product portfolio 1.3. Production and sales locations
We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars
EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We
Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.