EPIKOTE Resin MGS BPR 435 EPIKURE Curing Agent MGS BPH

Transcription

1 Product Bulletin Wind Energy Industrial bonding paste with outstanding fatigue performance EPIKOTE Resin MGS BPR 435 EPIKURE Curing Agent MGS BPH The EPIKOTE Resin MGS BPR 435 system series was developed for outstanding fatigue performance with excellent gap filling of FRP/FRP bond lines. It weighs less, can cure faster, and is easier to process. The system is GL (Germanischer Lloyd) approved and offers a service temperature range of -6 8 C ( F). Curing speed is determined by one of three curing agents. Mix Ratio Property EPIKOTE Resin MGS BPR 435 EPIKURE Curing Agent MGS BPH 434 Parts by Weight 1 44 Parts by Volume 1 52 Application Areas/ Suggested Uses For bonding of FRP to FRP and various materials Best used in the production of rotor blades for wind energy turbines, ships, sporting goods, molds, tools and other devices EPIKURE Curing Agent MGS BPH 437 Fast Slow EPIKURE Curing Agent MGS BPH 439 Benefits Outstanding fatigue performance Easy to handle Excellent gap filling properties Faster cure if desired adjustable curing speed Less dense for total weight reduction

2 EPIKOTE Resin MGS BPR 435 Sales Specification Property Unit Value Test Method/ Viscosity at 25 C Pa s 1 25 DIN D = 1 s -1 Color Typical Properties yellow Property Unit Value Test Method/ Epoxy equivalent g/equiv 225 DIN Density at 2 C g/cm³ 1.18 DIN EN ISO Shear Stress [Pa] Viscosity [Pa.s] Shear Rate [s -1 ] Shear Stress BPR 435 (D ) Shear Stress BPR 435 (D ) Viscosity BPR 435 (D ) EPIKURE Curing Agent MGS BPH 437 Sales Specification Property Unit Value Test Method/ Viscosity at 25 C Pa s 5 15 DIN D = 1 s -1 Color Typical Properties Property Unit Value Test Method/ Amine equivalent g/equiv 1 DIN Density at 2 C g/cm³ 1.2 DIN EN ISO blue Shear Stress [Pa] Viscosity [Pa.s] Shear Rate [s -1 ] Shear Stress BPH 435 (D ) Shear Stress BPH 435 (D ) Viscosity BPH 435 (D ) 2

3 EPIKOTE Resin MGS BPR 435/ EPIKURE Curing Agent MGS BPH System Processing Notes Uses EPIKOTE MGS Paste 435-series is a solvent-free epoxy bonding paste with a wide range of applications. It is suitable for bonding laminates, wood and appropriately prepared metallic and mineral components Shear Stress [Pa] Viscosity [Pa.s] Shear Rate [s -1 ] Shear Stress BP 435 (D ) Shear Stress BP 435 (D ) Viscosity (D ) Sag Resistance The system has excellent sag resistance even at elevated temperatures and is ideal for adhesion of vertical surfaces and across wide gaps. This adhesive resin does not bleed from vertical gaps even when immediately subjected to high curing temperatures (up to 8 C). 1 Thickness [mm]

4 Application Direct application to non-porous material surfaces is possible. Porous, absorbent surfaces should be primed with a liquid resin system mix. The adhesive resin system can then be applied either immediately, or after it gels slightly. Adding more or less than the recommended dosage of hardener will not achieve a faster or slower reaction. Instead, it will irreversibly prevent the adhesive from ever curing completely. Mixing The resin and hardener components are pasty and must be combined very thoroughly. Blend until no cloudiness is visible in the mixing container. The yellow color of the resin component and the red or blue color of the hardener component facilitate visual verification. Pay special attention to the walls and the bottom of the mixing container. Manual mixing of higher quantities of resin and hardener is very difficult and involves high production risks. To ensure reliably high production quality, use suitable mixing or dosing machines. Curing Conditions At the end of its bench life, EPIKOTE MGS Paste 435-series first gels, then solidifies. Ultimately, this progressive curing reaction results in a dimensionally stable form strong enough to be stripped from the mold. The curing process is only complete when no further improvement in properties such as mechanical strength, or an increase in the glass transition temperature, can be achieved. It should be noted that certain curing conditions must be met to optimize crosslinking. For the EPIKOTE Resin MGS BPR 435 and EPIKURE Curing Agent MGS BPH system to cure completely, it must be held at 6 7 C for at least 5 hours. Temperature The optimum processing temperature is between 2 35 C (68 95 F). Higher temperatures are possible, but will shorten pot life. A temperature increase of 1 C (18 F) will halve the pot life. Water (e.g., high humidity or moisture contained in additional fillers) accelerates the resin/hardener reaction. Variation in temperature or humidity during processing is not known to affect the mechanical properties of the cured product. Pot RT (25 C) Time [h] 4

5 Tg 6 C Time [h] Onset Midpoint Inflection End Tg 7 C Time [h] Onset Midpoint Inflection End Tg 8 C Time [h] Onset Midpoint Inflection End 5

6 Typical Properties of the Cured Compound Curing conditions: 1 h at 7 C Mixture 1. pbw EPIKOTE Resin MGS BPR pbw EPIKURE Curing Agent MGS BPH Property Unit Target Value Test Method/ Density g/cm³ 1.2 Tensile strength MPa 5 ISO 527 Elongation at break % 7 ISO 527 E-Modulus MPa 2.3 x 1 3 ISO 178 Impact strength mj/mm 2 28 ISO 179 Glass transition temp. Tg C 9 ISO 2578 Fracture Toughness K 1C MPa.m ½ DCB Fracture Toughness G 1C J/m² 225 DCB Lap shear strength, (at -4 C) MPa 2 DIN EN 1465 Lap shear strength, (at RT).5 mm Lap shear strength, (at RT) 3 mm Lap shear strength, (at 5 C).5 mm Lap shear strength, (at 5 C) 3 mm Lap shear strength, (at RT).5 mm, 1 h in water Lap shear strength, (at RT) 3 mm, 1 h in water Lap shear strength, (at 5 C).5 mm, 1 h in water Lap shear strength, (at 5 C) 3 mm, 1 h in water Peel strength (at RT).5 mm Peel strength (at RT) 3 mm Peel strength (at RT).5 mm, 1 h in water Peel strength (at RT) 3 mm, 1 h in water Single Lap Shear Fatigue 16 MPa 34.7 DIN EN 1465 MPa 24 DIN EN 1465 MPa 29.8 DIN EN 1465 MPa 24 DIN EN 1465 MPa 27.3 DIN EN 1465 MPa 2.7 DIN EN 1465 MPa 17.5 DIN EN 1465 MPa 2.2 DIN EN 1465 N/mm 2.5 DIN EN ISO N/mm 3.3 DIN EN ISO N/mm 2.5 DIN EN ISO N/mm 3.5 DIN EN ISO y = 3,81x -, Shear Stress [MPa] 1 8 no failure ,E+3 1,E+4 1,E+5 1,E+6 1,E+7 Cycles 6

7 Safety, Storage and Handling Please refer to the Material Safety Data Sheet (MSDS) for the most current Safety and Handling information. The components under discussion in this technical information data sheet should be stored at room temperature in a moisture-free environment, sealed in their original containers. Under these conditions they can be stored for a minimum of 12 months from the date of certification. Exposure to these materials should be minimized or avoided. Observe proper precautions, use appropriate engineering controls and proper personal protective clothing and equipment, and adhere to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the MSDS for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Momentive Specialty Chemicals Inc. ( Momentive ) products should be directed to your Momentive sales representative, or the nearest Momentive sales office. Information and MSDSs on non-momentive products should be obtained from the respective manufacturers. Packaging Available in drum quantities. Contact Information For product prices, availability, or order placement, visit the Contact Us section of our website. For literature and technical assistance, visit our website at: Form Number EPIKOTE Resin MGS BPR 435 7

8 Momentive: The Science Behind What Lies Ahead At Momentive, our global team is focused on delivering value by helping our customers make their products and processes better. We do this by bringing our deep technical expertise, market experience and technology portfolio to bear on their specific challenges. We are the science behind thousands of innovations that enhance both our customers business results and everyday life. Reach our Global Customer Service network at: U.S. and Canada Europe All Others Please refer to the literature code MSC-146 when contacting us. Momentive Specialty Chemicals Inc. World Headquarters 18 East Broad Street Columbus, OH Momentive Specialty Chemicals Inc. All rights reserved. and denote trademarks owned by or licensed to Momentive Specialty Chemicals Inc. MSC-146 3/12 Printed in Germany. The information provided herein was believed by Momentive Specialty Chemicals ( Momentive ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Momentive are subject to Momentive s terms and conditions of sale. MOMENTIVE MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY MOMENTIVE, except that the product shall conform to Momentive s specifications. Nothing contained herein constitutes an offer for the sale of any product.