SECTION 18. AMERICAN General Index
|
|
- Meredith Parrish
- 6 years ago
- Views:
Transcription
1 SECTION 18 AMERICAN General Index
2 General Index A Abbreviations Organizations Standard, American Abrasion Resistant Pipe Accessories (See Joint Materials) American Flow Control Valves and Hydrants...Section 14 ANSI Standards (See Standards) Areas for Ductile Iron Pipe Asphaltic Coating Asphaltic Lining Assembly Instructions (See Joint Assembly Instructions) ASTM Culvert Pipe Gravity Sewer Pipe Standards (See Standards) ASWP (American SpiralWeld Pipe)...Section 13 AWWA Classes Fittings AWWA Standards (See Standards) B Ball Joint Pipe Connections Flex-Lok General...Section 10 Installation Testing Base Bends Flanged Mechanical Joint Base Flange Details Base Tees Flanged Mechanical Joint Bases, Supporting Pipe , 6-31 Bell and Spigot Material...Section 12 Bell Mouth Fittings , 7-15 Bell Weights Bends, Fastite Bends Flanged, Special B16.1 Class Base Flange Flare Flex-Ring Lok-Ring Long Radius...6-8, 6-9 Reducing Side Outlet Bends Flanged, Standard...6-8, 6-11 Bends Flare (Bell Mouth) Bends Mechanical Joint, Special Base Bends Mechanical Joint, Standard Bevel, Field Fastite Joint Blind Flanges C110/A B16.1 Class Bolt Torques Mechanical Joint MJ Coupled Joint MJ Retainer Gland Toruseal Flange Gasketed Joint , 8-3 Bolts Coupling Gland End Flanged Flanged C110/A21.10 & C153/A21.53 Fittings Flanged C115/A21.15 Pipe Flanged B16.1 Class Flanged B16.1 Class , 8-12 Mechanical Joint MJ Coupled Joint Retainer Glands Stud , 8-4 Tee-Head , 2-25 Bosses Fittings Bosses Welded-on Pipe , Bull-Head Tees B16.1 Class 25 Flanged Fittings B16.1 Class 250 Flanged Fittings C Caps Fastite Flex-Ring Lok-Ring
3 Mechanical Joint Cast Iron Pipe (Gray Iron)...Section 12 Cast Iron Pipe Century Club...10 Caulking Material Cement Lining Field Repair General Thicknesses and Weights Century Club Cities...10 Check Valves General Circumferences, Ductile Iron Pipe Classes of Ductile Iron Pipe Special Thickness Classes Standard Pressure Classes Fittings (AWWA) Gray Iron Pipe Clearances (See Joint Clearances) Coal Tar Epoxy Lining Coatings Asphaltic High-Solids Epoxy Primer Phenolic Alkyd Primer Special Uncoated Collars Thrust Wall Color Codes, AMERICAN Companion Flanges for Ductile Iron Pipe (C115/A21.15).8-5 Ductile Iron Pipe (B16.1, Class 250) Steel O.D. Pipe (C115/A21.15).6-27 Steel O.D.Pipe (B16.1, Class 250) Concentric Reducers (See Reducers) Conductive Joints Fastite Connecting Pieces Flanged and Plain End Flex-Lok , Conversion Factors English ,33 Metric ,35 Corrosion Control Couplings Gland End Joint Grooved Joint Shouldered Joint Crosses Fastite Flanged, C110/A21.10 & C153/A Flanged, B16.1 Class Flanged Side Outlet Flex-Ring Lok-Ring Mechanical Joint Culvert Pipe Cutting Ductile Iron Pipe Cutting-In Sleeve, See Mechanical Joint Sleeve D Decimal Equivalents Deflection in Pipe Joints (See Joint Deflection) Depths of Cover, Allowable Min. Pressure Classes Ductile Iron Pipe Ductile Iron Pipe Gravity Sewer Pipe with Flexible Lining Design, Pipe Ductile Iron History of...1-3, 3-1 Directory District Sales Offices...3 Divisions American Cast Iron Pipe Company...Flyleaf Ductile Iron Definition Ductile Iron Pipe Cutting and Tapping Design Field Gaging General...Section 3 Hydrostatic Test Loading Quantities Manufacture Marking...3-7, Physical Properties Rounding , 9-19 Sewer Service Special Thickness Classes
4 Stacking Heights Standard Laying Conditions Standard Pressure Classes Tapping Testing Weights, Fastite, MJ, Plain End , 3-21 Ductile Iron Pipe Research Association (DIPRA)...7 E Eagan, John J....6, 7 Earth Loads Eccentric Reducers (See Reducers) Eighth Bend 45 (See Bends) Ells 90 (See Bends) Energy Savings with Ductile Iron Pipe Engineering Data...Section 17 Epoxy, Coal Tar Lining Equivalent Pipe Diameters Expansion of Pipe F Factory Mutual Research Corporation Valves and Hydrants Fast-Grip Gasket Fastite Joint (See Joints) Allowable Deflection...2-9, 3-9 Allowable Separation Field Bevelling Fittings...Section 4 Pipe, Ductile Iron...2-6, 3-8 Pipe, Gray Iron , 12-9 Field-Adaptable Flex-Ring Field Flex-Ring Field Welding Instructions Figure Number Index Filler, Flanged Fire Hydrants...Section 14 Fittings (See Bends, Crosses, Tees, Etc.) Combinations of Standard...5-3, 6-3 Fastite...Section 4 Flanged...Section 6 Flex-Ring...Section 4 Lok-Ring...Section 4 Mechanical Joint...Section 5 Plain Ends...4-4, 5-5 Tap Locations Flange Details B16.1 Class B16.1 Class Fittings C110/A21.10 & C153/A Pipe C115/A Flange Filler Flange Weights Flanged Adapters (See Connecting Pieces) Flanged Fittings C110/A21.10 & C153/A B16.1 Class Designation of Outlets Designation of Tap Locations Dimensions...6-6, 6-7 Flanged Pipe B16.1 Class 250 Flanges Flange and Flange, Fabricated Flange and Fastite, Fabricated Flange and MJ, Fabricated Flange and Plain End, Fabricated.8-7 General...Section 8 Joint Materials...8-2, 8-3, 8-4, 8-12 Flanged Pipe Statically Cast (Spools) Maximum Length Minimum Length Minimum Tap Distance Flare (Bell Mouth) Castings , 7-15 Flex-Lok Ball Joint Pipe Flex-Lok Closure Assemblies Flex-Lok Connecting Pieces.10-11, Flex-Ring Joint (See Joints) Allowable Deflection Fittings...Section 4 Pipe Flow of Water in Pipe Energy Savings Equivalent Pipe Diameters Hazen-Williams Formula Head Loss Tables Manning Formula Formulas Hazen-Williams Flow Head Loss Hoop Stress
5 Manning Mathematical Present Value of Money Pipe Lengths, Offset Connections Pumping Cost Radius of Curve...2-9, 2-20 Rotated Fittings and Inclined Runs Friction Loss of Pipe G Gaskets Fast-Grip Fastite Fastite Rubber Types Fastite Conductive Flanged, B16.1 Class Flanged, B16.1 Class Flanged, Standard Flanged, Toruseal , 8-3 Mechanical Joint Mechanical Joint Rubber Types Gate Valves Resilient Seated , 14-8 Tapping Glands Flex-Lok Mechanical Joint Mechanical Joint Retainer Gray Iron Pipe (Obsolete) 2" and 2 1 4" Bell and Spigot Flanged General...Section 12 Manufacture Monoloy Pit Cast Standard Laying Conditions Standard Thickness Classes , 12-5 Weights , 12-7 Working Pressures , 12-7 Gravity Flow Service Grooved Joint H Hazen-Williams Flow Formula Head Loss Formula General Tables Historical Data (Obsolete Materials) 2" and 2 1 4" Abrasion Resistant Pipe Bell & Spigot Fittings, AWWA C Bell & Spigot Joint Accessories Bell & Spigot Pipe Bends Flanged, Special B16.1 Class Double Branch Return (180 ) Historical Data (Obsolete Materials) Blow-Off Branches Bosses, Welded-on Pipe12-47, Fastite Joint Gray Iron Pipe, 14"-48" Field Adaptable Spigot Rings (FR)12-43 Flanged Fittings, AWWA C , B16.1 Class B16.1 Class Flanged Gray Iron Pipe Flex-Ring Pipe, 14-36, (Hinged Locking Ring Style) General...Section 12 Gray Iron Pipe...Section 12 Lok Fast Lok-Set Joint Pipe Lugged Fastite Mechanical Joint/Flanged and Long PE 90 Bends Mechanical Joint Ductile Iron Pipe, Mechanical Joint Gray Iron Pipe, 14"-48" Mechanical Locked Joint Mechanical Joint Retainer Glands Molox Ball Joint Bends
6 Molox Ball Joint Pipe Monoloy Pipe Offsets Pit Cast Pipe Short Body Bell & Spigot Fittings Tapped and Plain End Adapters Threaded Joint Pipe History of American Cast Iron Pipe Company..7 Pipe...9 Pipe Design Standards Hydrant, Fire Hydrostatic Test Ductile Iron Pipe I Inclined Run Calculation Indicator Posts Installation Instructions (See Joint Assembly Instructions) Introduction...7 J Joint Assembly Instructions Fast-Grip Gasket Fastite Fastite Fittings Fastite Restrained Plugs Field-Adaptable Spigot Ring (FR)12-43 Field Flex-Ring Flanged Reducers Flex-Lok , Flex-Ring Flex-Ring (Hinged Locking Ring Style) Flex-Ring Fittings Lok-Ring Lok-Ring Fittings Lok-Ring Plug Mechanical Joint Mechanical Joint Retainer Gland MJ Coupled Joint MJ Cutting-In Sleeves , Restrained Joint Extension Saddle Outlet Segmented Flex-Ring Joint Assembly Methods Fastite Joint Clearances Flanged Mechanical Joint Wall Piping Joint Deflection Fast-Grip Gasket Fastite...2-9, 3-9 Fastite Special Deflection Bell...2-9, 3-9 Field Flex-Ring Flex-Lok , 10-8 Flex-Ring Lok-Ring Mechanical Joint , 3-11 MJ Coupled Joint Joint Dimensions Bell and Spigot Coupling Gland End Fastite...2-8, 3-8 Fastite Fittings Flanged, B16.1 Class Flanged, B16.1 Class Flanged, Standard...6-4, 8-4 Flex-Lok...Section 10 Flex-Ring Flex-Ring Fittings Grooved End Lok-Ring, Lok-Ring, Lok-Ring Fittings Mechanical Joint , 5-4 Mechanical Joint Fittings MJ Coupled Joint Shouldered End Joint Disassembly Instructions Fast-Grip Gasket Field Flex-Ring Flex-Ring, 4"-12" Flex-Ring, 14"-36" Joint Materials (Accessories) Bell and Spigot Coupling Gland End Fastite Fastite Conductive Gasket
7 Flanged, B16.1 Class Flanged, B16.1 Class Flanged, Standard...6-4, 8-4 Flex-Lok...Section 10 Mechanical Joint MJ Coupled Joint Saddle Outlets Toruseal Gasket , 8-3 Joint Separation Fastite Mechanical Joint Joint Types Coupling Gland End Fast-Grip Fastite Fastite Conductive Field-Adaptable Spigot Ring Field Flex-Ring Flanged C110/A21.10 & C153A Flanged C115/A Flanged B16.1 Class Flanged B16.1 Class Flex-Lok Flex-Ring Flex-Ring (Hinged Locking Ring Style) Grooved End Lok Ring, Lok-Ring, Mechanical Joint Mechanical Joint Retainer Gland MJ Coupled Joint Shouldered End Joints, General...Section 2 K L Laterals (See Wyes) Laying Conditions Ductile Iron Pipe Gray Iron Pipe Lead and Jute Linear Expansion Ductile Iron Pipe Linings Asphaltic Cement Coal Tar Epoxy Special Unlined Loading Quantities of Pipe Lok-Ring Joint (See Joints) Allowable Deflection Fittings...Section 4 Minimum Laying Lengths Pipe Long Span Piping Loss of Head Tables Lubricant, Fastite Regular Underwater M Machine Bolts and Studs (See Bolts or Studs) Manning Formula Manufacture of Ductile Iron Pipe Mechanical Joint (See Joints) Allowable Deflection , 3-11 Allowable Separation Assembly Instructions Bolt Torques Fittings...Section 5 Joint Accessories Pipe, Ductile Iron , 3-10 Pipe, Gray Iron Retainer Glands Standard Dimensions Metric Conversion Table Monoloy (Steel O.D.) Pipe N Nut Weights O Obsolete Material (See Historical Data) Offices, American Sales...3 Offset Connections, Length Calculations Organization, American...Flyleaf Organizations, Abbreviations of
8 Outlets Saddled, Tapping , 7-16 Welded-On , 7-19 Welded-On Bosses , Welded-On, lateral Welded-On, tangential P Pilings, Steel Pipe Pipe, Weights of Ductile Iron Special Thickness Classes Standard Pressure Classes Fabricated Wall Flanged Flex-Lok Gray Iron Grooved Plain End , 7-3 Pipe, Design Data Ductile Iron...3-2, 3-23 Pipe Joints (See Joints) Piping History...9 Pit Cast Pipe, Dimensions Plugs Fastite Fastite Restrained Flex-Ring Lok-Ring Lok-Ring, Assembly of Mechanical Joint Suggested Specifications Polyethylene Encasement Dimensions and Weights General Installation Post Indicator Present Value of Money Pressure Ratings Min. Pressure Classes Ductile Iron Pipe Ductile Iron Pipe Fittings...4-2, 5-2, 6-2 Products, American...Flyleaf Push-On Joint (See Joint, Fastite) Q Quarter Bend 90 (See Bends) R Reducers Fastite Flanged Standard Flex-Ring Lok-Ring Mechanical Joint Reducing Companion Flanges Reducing Fittings (See Bends, Tees, Etc.) Reducing Flange Fillers Restrained Fastite Plugs Restrained Joints...Section 9 Retainer Glands, MJ River Crossing Pipe Rotated Fittings Calculations Rubber Gaskets (See Gaskets) S Saddle, Outlet/Tapping , 7-16 Sales Offices, American...3 Screwed-On Flanges (See Companion Flanges) Sewer Piping Shop Primers Shouldered Joint Side Outlet Fittings, Flanged B16.1, Class Bends, Crosses Tees Sixteenth Bend (See Bends) Sixty-Fourth Bend, Lok-Ring Sleeves, Solid MJ Transition Wall, Mechanical Joint Sleeves, Split MJ Tapping Special Service Piping General...Section 11 Specials...Section 7 Specifications (See Standards) Spiral-welded steel pipe...section 13 Split Glands, MJ Split Tapping Sleeves Stacking Heights of Pipe Standard Abbreviations
9 Standards AASHTO ASME ANSI...1-5, 1-6 Applicable to American Pipe and Fittings ASTM AWWA General...Section 1 History Of Listing Ductile Iron Pipe & Fittings Miscellaneous Static Pipe Lengths , 8-11 Steel Pipe General...Section 15 Line Pipe Piling Steel Products (AMERICAN Centrifugal) Applications Castings Fabricated Assemblies General...Section 16 Tubing, Cast Steel and Alloy Iron Stud Bolts Flange Joints...8-4, 8-12 Mechanical Joints Submarine, Subaqueous Pipe...Section 10 Surge Allowance Ductile Iron Pipe T Table of Contents...5 Tangential Outlets Tapping Ductile Iron Pipe Tapping Valves Tapping/Outlet Saddles , 7-16 Taps In Ductile Pipe, Method Ductile Pipe, No. Threads , Fittings, Location Designation Flanged Pipe Taps, Outside Diameters Tees Base, Flanged Base, Mechanical Joint Tees Fastite Flanged, C110/A21.10 & C153/A Flanged, B16.1 Class Flanged, Bull-Head Flanged, Reducing on Run Flanged, Reducing on Run & Branch Flanged, Side Outlet Flex-Ring Lok-Ring Mechanical Joint Test Plug , 4-19 Tests, Design Theory Tests, Manufacturing Thermal Expansion of Pipe Thirty-Second Bend (See Bends) Threaded-On Flanges (See Companion Flanges) Thrust Collars Thrust Restraint (See Restrained Joints) Torch Cutting Ductile Iron Pipe Torque, Bolts (See Bolt Torques) Toruseal Flange Gasket , 8-3 Transition Sleeve, MJ Trench-Laying Conditions Ductile Iron Pipe Gray Iron Pipe Trenchless Pipe Truck Load True Wyes Flanged Mechanical Joint Tubing, Steel U Underwriters' Laboratories, Inc. Valves and Hydrants...Section 14 V Valves Check Gate, Resilient Wedge Tapping Volumes, Ductile Iron Pipe W
10 Wall Castings Classes FST-Flange-FST Maximum Lengths Minimum Lengths MJ-Flange-MJ Sleeves Spools Wall Collar Dimensions Weight Calculations Wall Collars Wall Pipe, Fabricated Classes Minimum Lengths Thrust Collar Dimensions...7-3, 9-29 Wall Piping Installation Clearances Minimum Collar Locations Wall Sleeves Mechanical Joint Water Hammer Weight Calculations of Fittings...7-4, 7-5 Wall Castings Wall Pipe Weights Contained Water DI Metal Underwater, Flex-Lok , 10-6 Weights of Bells Ductile Iron Pipe Special Thickness Classes Standard Pressure Classes Gray Iron Pipe , 12-8 Flanges Plain-End Spools Wall Collars Welded Steel Pipe...Section 15 Welded-On Bosses (For DIP) , Welded-On Outlets , 7-19 Welded-On Lateral Outlets Welded-On Tangential Outlets Welding, Field Williams-Hazen Flow Formula Working Pressure, Allowable Min. Pressure Classes Ductile Iron Pipe Ductile Iron Pipe Wyes Flanged, B16.1 Class Flanged, Standard Mechanical Joint True, Flanged True, Mechanical Joint X Y Z 18-9
11 Figure Index Fig. No. No Ductile Iron Pipe Minimum Physical Properties Ductile Iron Pipe Standard Laying Conditions Torch Cutting Ductile Iron Pipe Bevel for Fastite Joint Circular Welding Fixture Gray Iron Pipe Standard Laying Conditions Gray Iron Pipe - Laying Condition "F" Short Body Bell & Spigot Fittings I.D. Chart
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationMECHANICAL JOINT PIPE
3"-24" DUCTILE IRON FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Mechanical Joint ipe 3 Assembly of Mechanical Joint ipe 4 Technical Information 5 U.S. IE
More informationSECTION DUCTILE IRON FITTINGS. A. This section includes materials, installation, and testing of ductile iron fittings 48 inches and smaller.
PART 1 - GENERAL 1.1 DESCRIPTION A. This section includes materials, installation, and testing of ductile iron fittings 48 inches and smaller. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. Section 01300 Record
More informationRestrained Joint Edition HP LOK 30" 64" NSF Water & Wastewater. Certified to ANSI/NSF 61
30" 64" NSF Water & Wastewater 866.DI.IE NSF 2 Table of Contents ipe and Fittings 30" 64" 3 Suggested Specifications for Restrained ush-on Joint ipe and Fittings 4 Joint Assembly Instructions 5 TYTON Gasket
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationSANITARY SEWERS. B. Construct or relocate building sanitary sewer services, stubs, and connections.
SANITARY SEWERS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Sanitary Sewer Gravity Mains B. Sanitary Sewer Force Mains C. Sanitary Sewer Services 1.02 DESCRIPTION OF WORK A. Construct sanitary sewer gravity
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationSection 3 Fusible PVC Pipe Connections
3.0 Fusible PVC pipe is joined together using butt-fusion joints, however, it may be necessary to utilize other connections to integrate Fusible PVC pipe sections into an overall pipe system. There are
More informationSeries 1100 Mechanical Joint Restraint for Ductile Iron Pipe
MEGALUG Series 1100 Mechanical Joint Restraint for Ductile Iron Pipe Features and Applications: Sizes 3 inch through 54 inch Constructed of ASTM A536 Ductile Iron Torque Limiting Twist-Off Nuts Nominal
More informationSECTION 2. AMERICAN Pipe Joints
SECTION 2 AMERICAN Pipe Joints AMERICAN Joints for Pipe and Fittings AMERICAN Fastite Joint, 4"-64" The AMERICAN Fastite Joint, furnished in sizes 4-64, is a flexible, rubber ring compression-type joint
More informationPIPE OUTSIDE DIAMETER GUIDE
August 17, 2017-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE
More informationARTICLE 29 SANITARY SEWER FORCE MAINS
SANITARY SEWER FORCE MAINS Index 29.01 GENERAL 29.02 DESIGN CRITERIA 29.03 MATERIALS 29.04 VALVES 29.05 INSTALLATION 29.06 IDENTIFICATION 29.07 HYDROSTATIC TESTING BACK TO TABLE OF CONTENTS Section 29.01
More informationALG41571 Canada Pipe Book_CANPIPE.QXD 09/10/12 10:46 AM Page 2 ULC
ALG41571 Canada Pipe Book_CANPIPE.QXD 09/10/12 10:46 AM Page 2 ULC CANADA pipe CANADA pipe Canada Pipe Company Ltd. with head offices in Hamilton, Ontario, is a Canadian subsidiary of McWane Inc. All Ductile
More information2. A preconstruction meeting with the TWA s staff is required prior to initiating construction.
General: 1. Construct utilities in accordance to TWA approved plans and shop drawings. Any deviation from the approved plans shall be approved by the DEVELOPER S ENGINEER and TWA 2. A preconstruction meeting
More informationSeries 2000PV Mechanical Joint Restraint for PVC Pipe
Series 2000PV Mechanical Joint Restraint for PVC Pipe Features and Applications: For restraining plain end PVC pipe at mechanical joint fittings and appurtenances Sizes 3 inch through 36 inch Sizes 42
More informationSUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION DUCTILE IRON PIPE, FITTINGS AND SPECIAL ITEMS
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 11 13.13 DUCTILE IRON PIPE, FITTINGS AND SPECIAL ITEMS PART 1 GENERAL... 3 1.1 Description... 3 1.2 Reference Specifications,
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
More informationSECTION WATER DISTRIBUTION
SECTION 33 10 00 WATER DISTRIBUTION PART 1 GENERAL 1.01 SUMMARY 1.02 CODES A. Section Includes: 1. Underground water service piping, watermains and appurtenances. A. All work shall comply with the most
More informationADDENDUM NO. 1. Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities
ADDENDUM NO. TO Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities Date of Addendum: December, 00 Hethcoat & Davis, Inc. 78 Franklin Road,
More informationFABRICATION TYTON JOINT Pipe DUCTILE IRON
PIPE FABRICATION TYTON JOINT Pipe DUCTILE IRON RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe 3" " 3 ASSEMBLY INSTRUCTIONS Alternate Methods of Assembly Field-Cut Pipe
More informationDUCTILE IRON PIPE. The Standard for Quality and Performance
DUCTILE IRON PIPE DUCTILE IRON PIPE The Standard for Quality and Performance Since its introduction into the marketplace in 1955, Ductile Iron pipe has been recognized as the industry standard for modern
More informationINDUSTRIAL PIPE FITTINGS, LLC
Page 1 of 9 SPIROLITE MUNICIPAL AND INDUSTRIAL ODOR CONTROL PIPING Municipal wastewater treatment plants, industrial processes and composting facilities can be assured of trouble free transport of foul
More informationSEWER FORCE MAIN HDPE PIPE
SECTION 15150 SEWER FORCE MAIN HDPE PIPE PART 1: GENERAL 1-1 DESCRIPTION: This specification governs the material, pipe, fittings, joining methods and general construction practice for High Density Polyethylene
More informationA. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationSection Storm Sewers STORM SEWERS PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Storm Sewers. B. Abandonment of Storm Sewers
STORM SEWERS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Storm Sewers B. Abandonment of Storm Sewers 1.02 DESCRIPTION OF WORK A. Construct storm sewers. B. Abandon storm sewers. 1.03 SUBMITTALS Comply with
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationSECTION DRAINAGE AND VENT SYSTEMS CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 The design guidelines contained herein include the requirements for drainage and vent systems utilized at The University of Texas at Austin. It is the intention of this document to
More information1. B16.1 Cast Iron Pipe Flanges and Flanged Fittings, Class C 111 Rubber Gasket Joints for Ductile Iron Pressure Pipe and Fittings
SECTION 33 34 00 SANITARY FORCE MAIN PART 1 GENERAL 1.1 SCOPE OF WORK A. This section specifies the requirements for furnishing and installing sanitary force main and appurtenances. The pipe shall be of
More informationPERFORMANCE PIPE DRISCOPLEX 4000/4100 Pipe Water and Wastewater Piping Systems
PERFORMANCE PIPE DRISCOPLEX 4000/4100 Pipe Water and Wastewater Piping Systems Corrosion Resistant Leak Proof Fused Joints Ideal for Trenchless Applications Flexible Hydraulically Efficient Will Not Tuberculate
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationSECTION PIPE & PIPE FITTINGS PART 1 GENERAL
SECTION 02610 PIPE & PIPE FITTINGS PART 1 GENERAL 1.01 DESCRIPTION A. This Section includes the material and bedding requirements for all pipe and pipe fittings for underground pressure and non-pressure
More informationPVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe
Design and Installation Guide PVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe TABLE OF CONTENTS Introduction 2 Products 3 Main-Line Fittings & Service-Line Fittings 3-4 Connections to Dissimilar
More informationCHAPTER 3 - PRESSURE IRRIGATION
CHAPTER 3 - PRESSURE IRRIGATION 3.1 GENERAL This division covers furnishing and installing pressure pipe as shown on the Drawings or established in the field, and all flushing, testing, repairing, as required
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationSclairpipe VERSATILE HIGH DENSITY POLYETHYLENE PIPE
Sclairpipe VERSATILE HIGH DENSITY POLYETHYLENE PIPE Sclairpipe Sclairpipe high density polyethylene (HDPE) pipe represents the latest advances in both material and manufacturing techniques. Since 1968,
More informationCHAPTER 3 - PRESSURE IRRIGATION
CHAPTER 3 - PRESSURE IRRIGATION 3.1 GENERAL This division covers furnishing and installing pressure pipe as shown on the Drawings or established in the field, and all flushing, testing, repairing, as required
More informationTown of Fortville Utility Street Standards
SECTION 02660 - WATER MAINS Town of Fortville PART 1 - GENERAL 1.1 DESCRIPTION A. Scope: Furnish and install pipe, fittings, valves, hydrant and appurtenances necessary to complete work shown or specified.
More informationC900/RJ. CertainTeed. PVC Pipe. with CertainTeed s proven Certa-Lok restrained joint system. Directional Drilling
1 1 CertainTeed C900/RJ PVC Pipe with CertainTeed s proven Certa-Lok restrained joint system Directional Drilling Underground Water Mains and Restrained, Non-Metallic Change-of-Direction Fittings (No Thrust
More informationDUCTILE IRON PIPE SUBAQUEOUS CROSSINGS
DUCTILE IRON PIPE SUBAQUEOUS CROSSINGS DUCTILE IRON PIPE SUBAQUEOUS CROSSINGS Introduction DUCTILE IRON pipe with boltless ball and socket joints is an extremely versatile product for use in subaqueous
More informationA. Codes and Standards that are Standards at the University. A. Provide floor drains in all toilet rooms, janitor closets, and mechanical rooms.
PART 1: GENERAL 1.01 Purpose A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationGREEN THREAD Piping Systems
Bulletin No. A1300 February 15, 2006 SMITH FIBERCAST GREEN THREAD Piping Systems PRODUCT GREEN THREAD pipe is filament wound using an amine cured epoxy resin and fiberglass and has a resin-rich liner reinforced
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 221313 - FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationInnovation in Joint Restraint Systems for PVC Pressure Pipe and Fittings. Clean & Safe Drinking Water Workshop. Wednesday, March 25, 2015
Innovation in Joint Restraint Systems for PVC Pressure Pipe and Fittings Clean & Safe Drinking Water Workshop Wednesday, March 25, 2015 Thrust forces Gasketed joints are made to seal and not to restrain,
More informationC. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPolyethylene Piping for Underground Fire Main Systems
Polyethylene Piping for Underground Fire Main Systems Bulletin: PP 504 Factory Mutual Approvals DRISCOPLEX Polyethylene Piping for Underground Fire Main Systems Factory Mutual Approvals DRISCOPLEX Polyethylene
More informationINTRODUCTION. PVC PRESSURE PIPE SPECIFICATIONS The SANS 966 is a two-part specification.
1 INTRODUCTION DPI Plastics (Pty) Ltd is a leading manufacturer of PVC and HDPE water reticulation and drainage pipe and fitting systems with two ISO 9001 certified South African factories based in Johannesburg
More informationRB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION
GENERAL DESCRIPTION The Orbinox model RB Weir Gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant
More informationWATER DISTRIBUTION
02510 Water Distribution Page 02510-1 (Last revised 7/22/10) 02510 - WATER DISTRIBUTION SELECTED LINKS TO SECTIONS WITHIN THIS SPECIFICATION Part 1- General HDPE Directional Bore Pressure Test & Leakage
More informationLINCOLN COUNTY STANDARD SPECIFICATIONS TABLE OF CONTENTS TECHNICAL SPECIFICATIONS
LINCOLN COUNTY STANDARD SPECIFICATIONS TABLE OF CONTENTS TECHNICAL SPECIFICATIONS Section Description Page Number 02110 Clearing and Grubbing...02110-1 To 02110-2 02210 Unclassified Excavation and Grading...02210-1
More informationAS/NZS 2280:2012 AS/NZS
AS/NZS 2280:2014 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Ductile iron pipes and fittings Superseding AS/NZS 2280:2012 AS/NZS 2280:2014 AS/NZS 2280:2014 This joint Australian/New
More informationSTANDARD SPECIFICATIONS SECTION PRESSURE SEWER SYSTEM 1.2 REQUIREMENTS FOR MANUFACTURERS AND SUPPLIERS BEFORE DELIVERY
STANDARD SPECIFICATIONS SECTION 02533 PRESSURE SEWER SYSTEM PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements to provide permanent grinder pump pressure sewer system, piping, and appurtenances.
More informationCONCRETE PRESSURE PIPE REPAIR GUIDE
CONCRETE PRESSURE PIPE REPAIR GUIDE TABLE OF CONTENTS CONCRETE PRESSURE PIPE REPAIR GUIDE Introduction...1 Emergency Phone Numbers...1 Emergency Repair Questionnaire... 2 Making a Durable Repair... 4 Types
More informationMETROPOLITAN SEWER DISTRICT LOW PRESSURE SEWER SYSTEM DESIGN REQUIREMENTS
METROPOLITAN SEWER DISTRICT LOW PRESSURE SEWER SYSTEM DESIGN REQUIREMENTS December 2009 Rev March 2014 TABLE OF CONTENTS INTRODUCTION.1 DEFINITIONS. 1 RESPONSIBILITIES.. 2 DESIGN SCENARIOS 2 SECTION 1
More informationCast Iron Sluice Gates Rugged Dependability in Demanding Applications
Cast Iron Sluice Gates Rugged Dependability in Demanding Applications A Proud Tradition Since 1840, the team at Rodney Hunt has pioneered safe and reliable flow control systems to help communities and
More informationDIVISION 33 WATER MAINS / SERVICE LINES
DIVISION 33 WATER MAINS / SERVICE LINES 33.01 SCOPE: The Contractor shall furnish all labor, material, equipment and supplies and shall perform all work necessary for the complete installation of the water
More informationKnowing Your Pipe Trenchless Technology Pipe Selection Guide. By Leanne Butkovic
PIPE PRODUCTS Knowing Your Pipe 2008 Trenchless Technology Pipe Selection Guide By Leanne Butkovic W ith the cornucopia of pipe available on the market, discerning which type of conduit is best for your
More informationBulletin No. A1380 September 15, Smith Fibercast CENTRICAST PLUS RB-2530 Piping Systems
Bulletin No. A1380 September 15, 2005 Smith Fibercast CENTRICAST PLUS RB-2530 Piping Systems PRODUCT CENTRICAST PLUS RB-2530 pipe is manufactured with high strength glass fabrics and our highly resilient
More informationVALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationCASITAS MUNICIPAL WATER DISTRICT REQUEST FOR PROPOSAL PIPING, FITTINGS AND VALVES July 23, 2012
1. INTRODUCTION CASITAS MUNICIPAL WATER DISTRICT REQUEST FOR PROPOSAL PIPING, FITTINGS AND VALVES July 23, 2012 The Casitas Municipal Water District (Casitas) is requesting proposals to provide and deliver
More informationCHAPTER 7 SANITARY DRAINAGE SYSTEMS
PlumbingCode06_ch07 5/29/06 8:13 AM Page 1 CHAPTER 7 SANITARY DRAINAGE SYSTEMS Drainage systems intimidate many people. When these people look at their codebooks, they see charts and math requirements
More informationMANHOLES, VAULTS AND CATCH BASINS SECTION A. Section Soil and Aggregate Materials. C. Section Storm Drainage Systems
SECTION 02607-1 1.0 GENERAL 1.1 SCOPE: A. This section covers the work necessary for the construction of sanitary and storm system manholes, catch basins, and miscellaneous concrete structures complete.
More informationSECTION WATER DISTRIBUTION SYSTEM
PART 1 GENERAL 1.1 SCOPE SECTION 02660 WATER DISTRIBUTION SYSTEM A. The Contractor shall furnish all labor, equipment, and materials and perform all operations necessary to construct a complete, functioning
More informationENGINEERING CATALOGUE Version 1.4
ENGINEERING CATALOGUE Version 1.4 Fiberglass Reinforced Composites Piping Tanks Equipment Engineering Services Table of Contents Commitment...3 Cooling Tower Piping...4 Tank & Vessels...5 FRP Piping &
More informationHORIZONTAL DIRECTIONAL DRILLING WITH DUCTILE IRON PIPE
HORIZONTAL DIRECTIONAL DRILLING WITH DUCTILE IRON PIPE HORIZONTAL DIRECTIONAL DRILLING WITH DUCTILE IRON PIPE By Richard W. Bonds, P.E. DIPRA Research and Technical Director Introduction Horizontal Directional
More informationLANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below
More informationSPECIFICATION: CAST IRON SLUICE GATES
SPECIFICATION: CAST IRON SLUICE GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor, materials, equipment and incidentals required to install, ready for operation and field
More informationRead Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED
Chapter 17 Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.1.1 Applicability The regulations in this chapter apply to any private potable water supply system where plumbing fixtures are
More informationSECTION FACILITY SANITARY SEWERS
SECTION 22 13 13 FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-33 30 00 (April 2008) Change 4-02/16 -------------------------- Preparing Activity: USACE Superseding UFGS-33 30 00 (July 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More informationRULES AND REGULATIONS FOR WATER AND WASTEWATER SERVICE APPENDIX B WATER AND WASTEWATER SERVICE CONSTRUCTION SPECIFICATIONS
RULES AND REGULATIONS FOR WATER AND WASTEWATER SERVICE APPENDIX B WATER AND WASTEWATER SERVICE CONSTRUCTION SPECIFICATIONS Last Approved Revision: 3-23-2017 Page i TABLE OF CONTENTS SECTION I GENERAL...
More informationRequest for Bids Sewer Department City of Portsmouth, New Hampshire Sewer Inventory Bid #48-15
Bid #48-15 Request for Bids Sewer Department City of Portsmouth, New Hampshire Sewer Inventory Bid #48-15 City of Portsmouth Public Works Department Sewer Inventory INVITATION TO BID Sealed bid proposals,
More informationSECTION WATER MAINS CITY OF LEE S SUMMIT, MISSOURI DESIGN CRITERIA
SECTION 6900 - WATER MAINS CITY OF LEE S SUMMIT, MISSOURI DESIGN CRITERIA 6901 DESIGN CRITERIA A. General 1. The design standards presented in the City of Lee's Summit Design Criteria are the minimum standards
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationConcrete Pressure Pipe
Concrete Pressure Pipe AWWA MANUAL M9 Third Edition Contents List of Figures, vii List of Tables, xi Acknowledgments, xiii Chapter 1 Purpose and Scope............................................... 1 Chapter
More informationSECTION PIPE AND TUBE RAILINGS PART 1- GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY 1.3 PERFORMANCE REQUIREMENTS
SECTION 055213- PIPE AND TUBE RAILINGS PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE
SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE SECTION 15000 MECHANICAL 1. GENERAL 1.1 This specification shall govern the materials and installation of polyethylene dual contained system of pipe, structures
More informationGASKETED JOINT PVC PRESSURE PIPE
INSTALLATION GUIDE FOR GASKETED JOINT PVC PRESSURE PIPE TABLE OF CONTENTS Introduction 3 Receiving 3 Unloading and Handling 4-5 Storage 6 Trenching 7 De-Watering 8 Field Cutting 8 Lowering Pipe into the
More informationSPECIFICATIONS SECTION WATER DISTRIBUTION SYSTEM 1.2 REQUIREMENTS FOR MANUFACTURERS AND SUPPLIERS AND CONTRACTORSBEFORE DELIVERY
SPECIFICATIONS SECTION 02510 WATER DISTRIBUTION SYSTEM PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements to furnish, construct, and test piping for water supply and distribution system, including
More informationThe Complete HOBAS Guide. Centrifugally Cast, Fiberglass-Reinforced, Polymer Mortar Pipe
The Complete HOBAS Guide Centrifugally Cast, Fiberglass-Reinforced, Polymer Mortar Pipe Why Pick HOBAS? The HOBAS name on the pipe says you ve chosen the leader in pipe technology: first choice for virtually
More informationSECTION 4 - DESIGN STANDARDS FOR WATER DISTRIBUTION FACILITIES
SECTION 4 - DESIGN STANDARDS FOR WATER DISTRIBUTION FACILITIES 4.1 GENERAL REQUIREMENTS 4.1.1 Water and fire protection distribution facilities are to be provided solely for the purpose of supplying potable
More informationCity of Flowery Branch Standard and Specifications Chapter WM
Section One Water Mains and Accessories City of Flowery Branch Chapter WM Part 1- General 1.01 Scope A. The Contractor shall furnish all equipment, labor and materials (unless otherwise agreed upon in
More informationASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
More informationBondstrand Series 3000A Fiberglass Pipe for General Industrial Service
Bondstrand Series 3000A Fiberglass Pipe for General Industrial Service Uses and Applications Alcohol solutions Boiler feed water Bridge, roof and floor drains Brine and brackish water Chemical process
More informationUNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10
UNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10 RECOMMENDED STANDARD SPECIFICATION FOR POLYVINYL CHLORIDE (PVC) FABRICATED PRESSURE FITTINGS November 2010 UNI-BELL PVC PIPE ASSOCIATION 2711 LBJ Freeway, Suite
More informationMANITOWOC PUBLIC UTILITIES
MANITOWOC PUBLIC UTILITIES CONSTRUCTION SPECIFICATIONS for the MPU WATER DISTRIBUTION SYSTEM Revised July 2015 INTRODUCTION The purpose of these Specifications is to establish basic water distribution
More informationSANITARY GRAVITY SEWER LINES. A. Sanitary sewer lines, manholes, fittings, accessories, and bedding
PART 1 GENERAL 1.1 SECTION INCLUDES A. Sanitary sewer lines, manholes, fittings, accessories, and bedding B. Municipal sewer service connections and clean-out access C. Bore and jack casing D. Creek crossing
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationOSU PROJECT NO PAGE 1 02 NOV 2006 SECTION PIPE AND PIPE FITTINGS
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish piping, pipe fittings, and incidental related items as required for complete piping systems. 1.2 RELATED WORK SPECIFIED ELSEWHERE
More informationASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)
More informationSECTION 8: WATER SUPPLY NETWORK
SECTION 8: WATER SUPPLY NETWORK 8.01 - Page i SECTION 8: WATER SUPPLY NETWORK Table of Contents SECTION 8: WATER SUPPLY NETWORK... I SECTION 8: WATER SUPPLY NETWORK... II TABLE OF CONTENTS... II SECTION
More informationFLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
More informationNorthpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSDR26 material is to be used as a minimum on all U-M projects.
BuildingName The Description of the Project P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 33 NUMBER SECTION DESCRIPTION DIVISION 33 SANITARY SEWER UTILITIES SECTION 333100 - SANITARY SEWER END OF CONTENTS
More informationIsolation Gaskets 101
Isolation Gaskets 101 Discussion Outline Isolation Gasket Basics Product Offering Gasket Terms & Definitions Materials & Applications Standards & Codes Isolation Gasket Basics ISOLATION GASKET Isolation
More informationWATER 6.1 GUIDELINES
6-1 6.0 WATER 6.1 GUIDELINES The requirements of the Queensland Water Resources Commission Guidelines for Planning and Design of Urban Water Supply Schemes shall be followed in general. The requirements
More informationCity of Goose Creek. Department of Public Works. Water Specifications
City of Goose Creek Department of Public Works Water Specifications 1 TABLE OF CONTENTS SECTION PAGE MATERIALS I. DUCTILE IRON PIPE AND PVC PIPE / 5 DUCTILE AND CAST IRON FITTINGS FOR WATER MAINS 1.1 DESCRIPTION
More information