Ceramic materials with submicron structure based on nanopowders
|
|
- Marylou Turner
- 6 years ago
- Views:
Transcription
1 Ceramic materials with submicron structure based on nanopowders Uwe Reichel, Fraunhofer Institute for Ceramic Technologies and Systems IKTS Institutsteil Hermsdorf, D Hermsdorf, Germany Nanophotonics and Nanomaterials, , Tomsk
2 Ceramic materials with submicron structure based on nanopowders Structure of Presentation: The Fraunhofer Institute for Ceramic Technologies and Systems IKTS History and Present of Ceramic Institute in Hermsdorf / Germany Vision Nanoceramics Selected Results and Experiences Draft of cooperative R&D projects Summary
3 Hermsdorf (Thuringia) Dresden (Saxonia) Start 2010: One institut Two location More potential in employees and equipment Addition of Know-how and capacity Better efficiency for customers Completely line from research to pilot plant
4 A9, Berlin Location: Hermsdorf / Thuringia A4 Frankfurt A4 Dresden A9, Munich Thuringia History: 1890: Porzellanwerk Hermsdorf as a branch of Porzellanwerk Kahla 1922: HERMSDORF-SCHOMBURG-Isolatoren GmbH ( Hescho ) 1952: VEB Keramische Werke HESCHO-Kahla Hermsdorf 1969: Kombinat VEB Keramische Werke Hermsdorf 1990: TRIDELTA AG 1992: TRIDELTA GmbH as a subsidiary of Jenoptik GmbH Foundation of HITK e.v. (in 2009: 75 employees) 1993: Foundation of inocermic GmbH as a subsidiary of HITK (in 2009: 35 employees) 2010: Integrate HITK and inocermic to Fraunhofer association
5 History since 1892: Porcelain production for electrical application 1897 : Invention of Delta Bell - Insulator Start for world-wide publicity
6 Competences today: Novel ceramic materials Development of ceramic catalyst materials, semiconductoring and dielectric ceramics Preparation, characterization and specific application of nanodisperse powders Ceramic Coatings Porous support oxide ceramics and membranes for filtration and gas separation, Ion- and mixed conducting membranes, Modules engineering Nanocomposites and sol-gel-coatings under clean room conditions Oxide Ceramics High-grade alumina and zirconia ceramics, Dispersion ceramics on the basis of alumina or zirconia, Composite materials Technologies for metallization and joining Nano Magnetic materials Soft and hard ferrite materials, NdFeB powders and processing CMR perovskite type materials, Composites and compounds Process engineering Granulation processing, Processing for swelling and porosification Coating of granules, Development of glass and glass ceramics Services Materials characterization, Testing, Design and simulation, Information and patent services Semiscale-plant / Pilot plant
7 Machines Bulk ceramics and coatings with high - corrosion stability - mechanical stability - thermal stability Medicine Preforms and implants with high - biocompatibility - mechanical strength - purity Chemicals and Environment Membranes Catalysts Bio-immobilization Industries and Products Microengineering Sensors Actuators Microsystem engineering Electrical Engineering and Optics Magnetic ceramics Transparent ceramics Semiconductors Composites Construction Heat insolation Sound isolation Granules
8 Vision Nano Main emphasis on the field of Nano Technologies: Characterize and processing of sub-µm- and nano-powders Mixing, homogenizing and coating of nano-powders with organic temporary additives and development of surface modified powders Nanocomposites and sol-gel-coatings for special applications Industrial processing technologies for forming and thermal technology Ceramic materials with improved properties: strength, hardness, reliability, optical transmission, thermal and chemical resistance Surface area machining and structuring
9 1) The Base: Manufactoring processes for Nanopowders Top-down Technology Mean Particle Size (D 50 ) Dry ground Wet ground 300 nm - (> 1 mm) 30 nm - (> 1 mm) Bottom-up Liquid phase synthesis 1 nm - 10 µm (Sol-Gel-Technique, Precipitation Technique, Hydrothermal synthesis) Gas phase synthesis 1 nm - 2 µm (Flame synthesis, Laser Vapourization, Plasma Technique) Scientific definition: Nano = Particle sizes < 0,1 µm
10 Example 1: Alumina (Plasma Technique) Pictures from TEM 300 nm 200 nm
11 Example 2: Zirconia (Plasma Technique) Pictures from TEM 300 nm 200 nm
12 Example 3: Zirconia (Laser Vapourization) Pictures from SEM 300 nm
13 Example 4: Different Techniques Pictures from SEM Spinell by Chemical coprezipitation: Scale: µm Spinell by Pulsation reactor technique :
14 Example 5: Different Producer Pictures from SEM Scale: µm All Spinell by Chemical Coprezipitation
15 Summary - Powder characterization - Main emphasis Mean particle size Particle size distribution Giant particles Particle form Hard or weakly agglomerated grains - Importand to manufacture bulk nanostructured ceramics - Basic for R&D to manufacture fully dense nanostructured ceramics with improved properties
DAS FRAUNHOFER IKTS ALS INNOVATIVER PARTNER IM BEREICH BIO- UND MEDIZINTECHNIK
DAS FRAUNHOFER IKTS ALS INNOVATIVER PARTNER IM BEREICH BIO- UND MEDIZINTECHNIK Andreas Lehmann, Dr. rer. nat. Jörg Opitz Medizintechnik in Sachsen 07.12.2016 Our Business Divisions Fraunhofer IKTS in profile
More informationPilot processing line of Nano-Centre of Tomsk Polytechnic University for manufacturing articles from bulk nanostructured ceramics/composites
Pilot processing line of Nano-Centre of Tomsk Polytechnic University for manufacturing articles from bulk nanostructured ceramics/composites 1. Analysis of nanopowders 2. Compacting of dry nano-, polydisperse
More informationZnO-based Transparent Conductive Oxide Thin Films
IEEE EDS Mini-colloquium WIMNACT 32 ZnO-based Transparent Conductive Oxide Thin Films Weijie SONG Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo, P. R. China
More informationNanoparticles Improve Coating Performances
Nanoparticles Improve Coating Performances presented by Dr. Thomas Sawitowski, Manager Nanotechnology The use of Nanoadditives in plastic and coating composites ICNT, San Francisco 2005 1 Out-line Definition
More informationZYBF. High Temperature Yttria Stabilized Zirconia Fibers. Advanced Fibrous Ceramics
Advanced Fibrous Ceramics ZYBF High Temperature Yttria Stabilized Zirconia Fibers The Unrivaled Industry Leader of ZrO 2 Insulation Three Product Types ZYBF-1 (7.5 pcf) ZYBF-2 (21 pcf) ZYBF-5 (16 pcf)
More informationRomanian Academy Institute of Physical Chemistry Ilie Murgulescu. PhD THESIS SUMMARY
Romanian Academy Institute of Physical Chemistry Ilie Murgulescu PhD THESIS SUMMARY CORRELATIONS BETWEEN STRUCTURAL AND PHYSICO - CHEMICAL PROPERTIES OF THE SEMICONDUCTOR OXIDES WITH OPTIC, SENSORISTIC
More informationPreparation and Characterization of Nickel and Copper Ferrite Nanoparticles by Sol-Gel Auto-Combustion Method
Preparation and Characterization of Nickel and Copper Ferrite Nanoparticles by Sol-Gel Auto-Combustion Method Anitha Rani. K* and Senthil Kumar. V* *Department of Physics, Karpagam University, Coimbatore-21.
More informationOptical and Mechanical Properties of Nano-Composite Optical Ceramics
Optical and Mechanical Properties of Nano-Composite Optical Ceramics *C. Scott Nordahl, Thomas Hartnett, Todd Gattuso, Richard Gentilman Raytheon Integrated Defense Systems c_scott_nordahl@raytheon.com
More informationNATIONAL RESEARCH PROGRAMMES FOR HIGH TECH CERAMICS IN THE NETHERLANDS
Printed High Tech Ceramics, edited by P. Vincenzini 3063 Elsevier Science Publishers By., Amsterdam, 1987 in The Netherlands NATIONAL RESEARCH PROGRAMMES FOR HIGH TECH CERAMICS IN THE NETHERLANDS R. METSELAAR
More informationManufacturing of Metal Foam Supported SOFCs with Graded Ceramic Layer Structure and Thinfilm Electrolyte
Manufacturing of Metal Foam Supported SOFCs with Graded Ceramic Layer Structure and Thinfilm Electrolyte Feng Han 1, Robert Semerad 2, and Rémi Costa 1 1 German Aerospace Center 2 Ceraco Ceramic Coating
More informationTHE DEVELOPMENT OF GAS TIGHT THIN FILMS OF (La,Sr)(Ga,Fe)O 3. , (La,Sr)(Co,Fe)O 3 AND La 2 FOR OXYGEN SEPARATION. NiO 4 INTRODUCTION
THE DEVELOPMENT OF GAS TIGHT THIN FILMS OF (La,Sr)(Ga,Fe), (La,Sr)(Co,Fe) AND La 2 FOR OXYGEN SEPARATION R. Muydinov, M. Novojilov, O. Gorbenko, I. Korsakov, A. Kaul Moscow State University, Russia S.
More informationFabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders
Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders Jing Yang, Tzu-Chieh Lin, Bill Manett, Jeremy Young, Dan Rooney Eugene Medvedovski SCI Engineered Materials,
More informationPLANSEE SEMINAR International Conference on Refractory Metals and Hard Materials. First Circular
19 PLANSEE SEMINAR 2017 International Conference on Refractory Metals and Hard Materials Reutte/Austria 29 May 2 June, 2017 First Circular 19 th Plansee Seminar, 29 May - 2 June, 2017 Message from the
More informationAtmospheric plasma technology for surface modification of nanoparticles
9/16/2011 Atmospheric plasma technology for surface modification of nanoparticles Dirk Vangeneugden - COST Meeting, Espoo, Finland, 15-16/09/2011 Contents Introduction to VITO Developed atmospheric plasma
More informationCeramic and glass technology
1 Row materials preperation Plastic Raw materials preperation Solid raw materials preperation Aging wet milling mastication Mixing seving Grain size reduction Milling Crushing Very fine milling Fine milling
More informationTHINK. Filter Technology SIKA-B
THINK Filter Technology SIKA-B ENGINEERING THAT MOVES THE WORLD Since 1759 250 years of exceptional engineering GKN Sinter Metals Filters, the leading manufacturer of porous sinter metal products, offers
More informationLOT. Contents. Introduction to Thin Film Technology. Chair of Surface and Materials Technology
Introduction to Thin Film Contents 1. Introduction and Application Examples (2h) 2. Preparation of Thin Films by PVD (Physical Vapor Deposition) (6h) 2.1 Vacuum Technique (1h) 2.1.1 Kinetics of Gases 2.1.2
More informationcubic zirconia system
e ia Th on tion rc lu Zi vo )e (R cubic zirconia system Bending strength according to ISO 6872 Fracture toughness according to ISO 6872 Translucency at a thickness of 0,6 mm > 720 MPa > 4,5 MPa m 49 %
More informationHigh Efficiency UV LEDs Enabled by Next Generation Substrates. Whitepaper
High Efficiency UV LEDs Enabled by Next Generation Substrates Whitepaper Introduction A primary industrial market for high power ultra-violet (UV) LED modules is curing equipment used for drying paints,
More informationPowder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering
Powder Metallurgy Science, Technology and Materials Anish Upadhyaya Associate Professor Department of Materials Science and Engineering Indian Institute of Technology Kanpur, India G S Upadhyaya Former
More informationSPRING SEMESTER GRADUATE APPLICATIONS RESEARCH TOPICS FOR PROSPECTIVE STUDENTS
2012-2013 SPRING SEMESTER GRADUATE APPLICATIONS RESEARCH TOPICS FOR PROSPECTIVE STUDENTS Program (. or Integrated Prof.Dr. İshak Karakaya Electrodeoxidation and/or. Program (. or Integrated Assist. Prof.
More informationMicophotometric Control of Particles and Inhomogeneities in Flowing Polymer Melts during Extrusion Processing
M.Stephan, S.Große: Micophotometric Control of Particles and Inhomogeneities in Flowing Polymer Melts during Extrusion Processing Workshop January, 28 th -29 th 2005, Dresden Particulate Heterogeneities
More informationCore-Shell-Structured Tungsten Composite Powders. A. Bicherl*, A. Bock*, B. Zeiler*, W.D. Schubert**
Bicherl, Bock, Zeiler et al. 17th Plansee Seminar 2009, Vol. 3 GT 27/1 ore-shell-structured Tungsten omposite Powders A. Bicherl*, A. Bock*, B. Zeiler*,.D. Schubert** *olfram Bergbau- und Hütten GmbH NfG
More informationMoving toward Sustainability
Nanotechnology and the Environment: Moving toward Sustainability Barbara Karn, PhD Health and Environment Organization April 17, 2012 A bit of history Nanotechnology is enabled Nanotechnology is recognized
More informationAdvanced Materials Thermal and Environmental Barrier Coatings Solid Oxide Fuel Cells Custom Compositions
Advanced Materials Thermal and Environmental Barrier Coatings Solid Oxide Fuel Cells Custom Compositions Advanced Materials With over 50 years of advanced ceramic expertise, Skyworks Solutions, through
More informationNanopowder Synthesis & Associated Safety Precautions at ARDEC: Partnering with NIOSH
U.S. ARMY ARMAMENT, RESEARCH, DEVELOPMENT, & ENGINEERING CENTER Nanopowder Synthesis & Associated Safety Precautions at ARDEC: Partnering with NIOSH Chris Haines Ph.D., 973 724 3037, chris.haines@us.army.mil
More informationJournal of Chemical and Pharmaceutical Research, 2017, 9(1): Research Article
Available online www.jocpr.com Journal of Chemical and Pharmaceutical Research, 2017, 9(1):163-167 Research Article ISSN : 0975-7384 CODEN(USA) : JCPRC5 Synthesis and Characterization of Carbon Nano Spheres
More informationAdvances in Materials for Solid Oxide Fuel Cells
Page 1 of 7 Page 1 of 7 Return to Web Version Advances in Materials for Solid Oxide Fuel Cells By: Raymond J. Gorte, Material Matters Volume 5 Article 4 Chemical & Biomolecular Engineering University of
More informationFinal Year Project Proposal 1
Final Year Project Proposal 1 Mechanical testing for high temperature polymers Mr Eric Phua Jian Rong (JRPhua@ntu.edu.sg) In offshore subsea drilling, different types of microelectronics devices and sensors
More informationExperimental O 3. Results and discussion
Introduction Surface coatings to protect against oxidation extend the service temperature and the service life of basic metals. The commercially used coating systems can be divided into three main groups:
More informationExperiences of PLD Technology for LIB Separators. PICODEON Oy. Neal White
Experiences of PLD Technology for LIB Separators PICODEON Oy Neal White 1 Outline Introduction to Picodeon Ceramic coating rationale Separator overview Why PLD for LIB separators Current status of Picodeon
More informationIncrease powder packing density. Spherical particles provide denser packing of powders, increasing overall bulk tap density.
Plasma power can make better powders It may be a truism to say that round powders pack better, but spheroidisation of powder particles is one of the successful commercial applications of induction plasma
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationMetallic materials for extreme environments with nanostructural surface layer (MENSUR)
For submission to EU s 7 th framework programme Metallic materials for extreme environments with nanostructural surface layer (MENSUR) Programme objective: NMP-2007-4.2.5-1 Novel materials tailored for
More informationControlling Emissions and Saving Money with Highly Engineered Cartridge Filter Technology
Controlling Emissions and Saving Money with Highly Engineered Cartridge Filter Technology Introduction By Richard Lydon, VP Technology & Business Development Over the last number of years Clear Edge has
More informationTechnological Aspects of Metal Nanopowders
PHYSICS and CHEMISTRY of NANOMATERIALS, lecture 6 Alexander A. Gromov gromov@tpu.ru Chair of Silicates and Nanomaterials, Faculty of Chemical Technology, Tomsk Polytechnic University, RUSSIA Technological
More informationThe Swedish Foundation for Strategic Research calls for proposals for research group grants for research in Materials Science
27 June 2008 The Swedish Foundation for Strategic Research calls for proposals for research group grants for research in Materials Science The Foundation calls for proposals for five-year research group
More informationInvestigation of Usebility of Composite Filters on Retention of Radium in Natural Waters
Investigation of Usebility of Composite Filters on Retention of Z.G. PORTAKAL, Ş. AYTAŞ, C. GÖK Ege University Institute of Nuclear Sciences Bornova-Izmir-TURKEY e-mail: gizemsry@hotmail.com What is the
More informationSintering Behavior of Porous Nanostructured Sr-Doped Lanthanum Manganite as SOFC Cathode Material
Int. J. Nanosci. Nanotechnol., Vol. 9, No. 2, June 2013, pp. 71-76 Sintering Behavior of Porous Nanostructured Sr-Doped Lanthanum Manganite as SOFC Cathode Material H. Tamaddon *, A. Maghsoudipour Ceramics
More informationStructure and optical properties of M/ZnO (M=Au, Cu, Pt) nanocomposites
Solar Energy Materials & Solar Cells 8 () 339 38 Structure and optical properties of M/ (M=Au, Cu, Pt) nanocomposites U. Pal a,b, *, J. Garc!ıa-Serrano a, G. Casarrubias-Segura a, N. Koshizaki c, T. Sasaki
More informationW-15wt%Cu
- 2 1 *1-1 -2 * elt_ahmadi@alum.sharif.edu (1390/03/28 : 1389/12/23 : ) W-15wt%Cu. 3 2 1 /. 1250 1200 1150 1100 90 15 750 700 650. 60.. 63. 445 72/9 90 700 16/1-60 1200. :. - 7. (1) -.[4-9] -1-3 1 2 5.[1-7]
More informationLecture 6. Through-Wafer Interconnect. Agenda: Through-wafer Interconnect Polymer MEMS. Through-Wafer Interconnect -1. Through-Wafer Interconnect -2
Agenda: EEL6935 Advanced MEMS (Spring 2005) Instructor: Dr. Huikai Xie Lecture 6 Through-wafer Interconnect EEL6935 Advanced MEMS 2005 H. Xie 1/21/2005 1 Motivations: Wafer-level packaging CMOS 3D Integration
More informationRoll-to-roll Technology for Transparent High Barrier Films
Roll-to-roll Technology for Transparent High Barrier Films Presented at the AIMCAL Fall Technical Conference, October 19-22, 2008, Myrtle Beach, SC, USA Nicolas Schiller, John Fahlteich, Matthias Fahland,
More informationManufacturing of fibre preforms with granulated oxides: Influence of the grain size
PART III 1 Manufacturing of fibre preforms with granulated oxides: Influence of the grain size R. Scheidegger, L. Di Labio, W. Lüthy, T. Feurer Institute of Applied Physics, University of Bern, Sidlerstrasse
More informationNanotechnologie in der Lebensmittelindustrie
Nanotechnologie in der Lebensmittelindustrie Peter Schurtenberger Department of Physics and Fribourg Center for Nanomaterials (FriMat) University of Fribourg 1700 Fribourg, Switzerland www.unifr.ch/physics/mm/
More informationTransparent Ceramic Yb 3+ :Lu2O3 Materials
Contract no.: FA2386-10-1-4113 Final report for the project on: Transparent Ceramic Yb 3+ :Lu2O3 Materials Submission Date: Jan 19 th, 2012 Principal Investigator: Dr. Akio Ikesue World-Lab. Co., Ltd.
More informationObjectives. Development of oxide ceramic matrix composite (OCMC)
10 th CMCee ; 21.-23.05.12; Dresden Aqueous slurries for oxide ceramic composites: Correlation between mechanical properties of the composite and composition of the Al 2 O 3 / ZrO 2 powder. Arne Rüdinger,
More information3D SCREEN PRINTING ADDITIVE MANUFACTURING FOR MASS PRODUCTION. Fraunhofer IFAM Dresden
3D SCREEN PRINTING ADDITIVE MANUFACTURING FOR MASS PRODUCTION Ov erv iew Frauhofer Fraunhofer society Itzehoe Lübeck Rostock Bremerhaven Bremen Oberhausen Dortmund Duisburg Schmallenberg St. Augustin Aachen
More informationPreprint - Mechatronics 2008, Le Grand-Bornand, France, May
Potentialities of piezoresistive cantilever force sensors based on free standing thick films Hélène Debéda(*), Isabelle Dufour, Patrick Ginet, Claude Lucat University of Bordeaux 1, IMS Laboratory, 51
More informationHard Coated Silica/Silica (Low OH) Radius
DESCRIPTION When looking for a silica core and silica clad fiber with a hard polymer coating that allows a high core-to-clad ratio and a numerical aperture (N.A.) of 0.22 for efficient light coupling,
More informationMaterial knowledge the basis of Powder Metallurgy and Additive Manufacturing
Material knowledge the basis of Powder Metallurgy and Additive Manufacturing J. Opschoor April 2014 ECN-L--14-016 Material knowledge the base of Powder Metallurgy and Additive Manufacturing Jan Opschoor
More informationEV Group 300mm Wafer Bonding Technology July 16, 2008
EV Group 300mm Wafer Bonding Technology July 16, 2008 EV Group in a Nutshell st Our philosophy Our mission in serving next generation application in semiconductor technology Equipment supplier for the
More informationFabrication and characterization of Ni SiC Cr nanocomposite coatings
Appl Nanosci (2013) 3:357 362 DOI 10.1007/s13204-012-0136-2 ORIGINAL ARTICLE Fabrication and characterization of Ni SiC Cr nanocomposite coatings Mehran Masoudi Mansor Hashim Halimah Mohamed Kamari Mohd
More informationSupramolecular Templates. Nanoporous Metal Oxides. Structure Replication: Porous Silica as "Hard Template" conventional synthesis:
Nanoporous Metal Oxides as Gas Sensors Institute of Inorganic and Analytical Chemistry Giessen Introduction conventional synthesis: self assembly of amphiphilic molecules supramolecular aggregates serve
More informationFeatures Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity
Properties and Part Selection Overview Selection Table - Epoxy-Based Adhesive Properties Features Conductive Room Temperature Cure Product Ref 120 132 4461IP 42IP 438 700 Properties High electrical conductivity
More informationPhotonic Drying Pulsed Light as a low Temperature Sintering Process
Photonic Drying Pulsed Light as a low Temperature Sintering Process Lou Panico Xenon Corporation W E S T E R N M I C H I G A N U N I V E R S I T Y PRESENTATION OVERVIEW What is Printed Electronics Materials
More informationCeramic Microchannel Devices for Thermal Management. C. Lewinsohn, J. Fellows, and H. Anderson Ceramatec, Inc. Salt Lake City, UT
Ceramic Microchannel Devices for Thermal Management C. Lewinsohn, J. Fellows, and H. Anderson Ceramatec, Inc. Salt Lake City, UT The Right Size for The Right Physics centi milli micro 2 Multiscale Structure
More informationLaser Micromachining for Industrial Applications and R&D. 3D-Micromac AG. Symposium on Smart Integrated Systems in Chemnitz. 3D-Micromac AG
3D-Micromac AG Symposium on Smart Integrated Systems in Chemnitz 1 1 microdice - TLS-Dicing for separation of SiC 2 microprep - for high-throughput microstructure diagnostics 3 About 3D-Micromac AG 2 microdice
More informationPlasma Activated EB-PVD of Titanium and its Compounds by Means of Large Area SAD
AIMCAL 2005 Myrtle Beach, SC, USA, October 19th, 2005 Plasma Activated EB-PVD of Titanium and its Compounds by Means of Large Area SAD E. Reinhold, C. Steuer VON ARDENNE Anlagentechnik GmbH, Dresden, Germany
More informationMaterials Science &Technology
PAUL SCHERRER INSTITUT Materials Science &Technology NANCER project partners: Rene Tölke, Barbara Scherrer, Henning Galinski, Thomas Ryll, Ludwig Gauckler, Nonmetallic Inorganic Materials, ETH Zurich Thomas
More informationAC : DEVELOPMENT OF A LABORATORY MODULE IN HY- BRID BIODEGRADABLE CORNSTARCH MATERIALS
AC 2011-447: DEVELOPMENT OF A LABORATORY MODULE IN HY- BRID BIODEGRADABLE CORNSTARCH MATERIALS Spencer Seung-hyun Kim, Rochester Institute of Technology (RIT) Dr. Spencer Seung-hyun Kim is Associate Professor
More informationInvestigation of Material Properties for Thermoelectric Generator System Application
Investigation of Material Properties for Thermoelectric Generator System Application P.M.Solanki 1 1 Assistant Professor, Mechanical Engineering, SSBT`s COET, Bambhori, Jalgaon, (M. S.), India 1 p_msolanki@rediffmail.com
More informationCadmium Oxide Nano Particles by Sol-Gel and Vapour- Liquid-Solid Methods
Nano Vision, Vol.1 (1), 47-53 (2011) Cadmium Oxide Nano Particles by Sol-Gel and Vapour- Liquid-Solid Methods S. SAKTHIVEL* and D. MANGALARAJ 1 *PG and Research Department of Physics, Rajah Serfoji Govt.
More informationKeramische Technologien und Systeme für die effiziente Energiewandlung und -speicherung
Keramische Technologien und Systeme für die effiziente Energiewandlung und -speicherung Institut für Keramische Technologien und Systems: IKTS Alexander Michaelis Total Budget: Mio Main sites : Dresden
More informationTUTORIAL ON SPUTTER DEPOSITION
MATERION ADVANCED CHEMICALS COATING MATERIALS NEWS September 2011 Volume 22 Issue 1 TUTORIAL ON SPUTTER DEPOSITION NEW ON THE WEB Non-Silicon Thin-Film PV Materials Progress and Challenges by - David A.
More informationDevelopment of Piezoelectric Nanocomposites for Energy Harvesting and Self-Sensing
Development of Piezoelectric Nanocomposites for Energy Harvesting and Self- Kenneth J. Loh Assistant Professor Department of Civil & Environmental Engineering University of California, Davis The Applied
More informationResearch Centre of Advanced Materials and Technologies for Recent and Future Applications PROMATECH
Research Centre of Advanced Materials and Technologies for Recent and Future Applications PROMATECH Slovak Academy of Sciences Pavol Jozef Šafárik University in Košice Technical University of Košice High
More informationFe doped Magnetic Nanodiamonds made by Ion
Fe doped Magnetic Nanodiamonds made by Ion Implantation ChienHsu Chen a, I.C. Cho b, Hui-Shan Jian c and H. Niu a* a Nuclear Science and Technology Development Center, National Tsing Hua University, HsinChu
More informationAlternative Methods of Yttria Deposition For Semiconductor Applications. Rajan Bamola Paul Robinson
Alternative Methods of Yttria Deposition For Semiconductor Applications Rajan Bamola Paul Robinson Origin of Productivity Losses in Etch Process Aggressive corrosive/erosive plasma used for etch Corrosion/erosion
More informationSupporting Information
Supporting Information Fast-Response, Sensitivitive and Low-Powered Chemosensors by Fusing Nanostructured Porous Thin Film and IDEs-Microheater Chip Zhengfei Dai,, Lei Xu,#,, Guotao Duan *,, Tie Li *,,
More informationCYRANNUS. Welcome at iplas. See the latest developments! CYRANNUS.
Welcome at iplas. See the latest developments! High performance plasma CYlindrical Resonator with ANNUlar Slots EH-tuner from vacuum to atmosphere uniform plasma large plasma extension high power density
More informationFunctional Ceramics for Electronics and Energy Technology
Functional Ceramics for Electronics and Energy Technology Prof. Dr. Aleander Michaelis IKTS in Dresden employees ca. 160 usable space: ca. 9200 m 2 clean rooms ca. 350 m 2 FhG Group: Materials and Components
More informationSupporting Information. Low temperature synthesis of silicon carbide nanomaterials using
Supporting Information Low temperature synthesis of silicon carbide nanomaterials using solid-state method Mita Dasog, Larissa F. Smith, Tapas K. Purkait and Jonathan G. C. Veinot * Department of Chemistry,
More informationDIRECT LASER SINTERING OF BOROSILICATE GLASS
DIRECT LASER SINTERING OF BOROSILICATE GLASS F. Klocke, A. McClung and C. Ader Fraunhofer Institute for Production Technology IPT, Aachen, Germany Reviewed, accepted August 4, 2004 Abstract Despite the
More information12.0 Materials for Missile, Space, and Launch Systems
12.0 Materials for Missile, Space, and Launch Systems 12.1 Introduction Affordability is the key criterion for assessing the value of a new technology and its potential incorporation into military applications.
More informationLong Term Archivability and Stability of Fujifilm Magnetic Tape Using Barium-Ferrite (BaFe) Particle
Long Term Archivability and Stability of Fujifilm Magnetic Tape Using Barium-Ferrite (BaFe) Particle FUJIFILM Corporation has proven that more than a 30 year archival period is possible with Fujifilm's
More informationFABRICATION FOR MICRO PATTERNS OF NICKEL MATRIX DIAMOND COMPOSITES USING THE COMPOSITE ELECTROFORMING AND UV- LITHOGRAPHY
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS FABRICATION FOR MICRO PATTERNS OF NICKEL MATRIX DIAMOND COMPOSITES USING THE COMPOSITE ELECTROFORMING AND UV- LITHOGRAPHY Tsung-Han Yu, Shenq-Yih Luo,
More informationACTIVATION AND FUNCTIONALIZATION OF POLYMERS BASED ON GEOMETRY- INDEPENDENT PLASMA SOURCE CONCEPTS
ACTIVATION AND FUNCTIONALIZATION OF POLYMERS BASED ON GEOMETRY- INDEPENDENT PLASMA SOURCE CONCEPTS October 25, 2017 - Parts2Clean Fachforum und Innovationsforum AGENDA Fraunhofer IST Basics about plasma
More informationThe application of nano metal powder
The application of nano metal powder Nano material and nanotechnology respectively belong to the new material and advanced technology that emerged in the late 20 th century. Due to the small size effect,
More informationCrossflow Filtration for Ink Jet Fluids
Crossflow Filtration for Ink Jet Fluids For ink jet ink and colorant formulation, efficient filtration makes all the difference. Improve your process and product with crossflow technology. In recent years,
More informationFabrication and STM Nanostructuring of tetrahedral amorphous Carbon. Teja Roch
Fabrication and STM Nanostructuring of tetrahedral amorphous Carbon Teja Roch Fabrication and STM Nanostructuring of tetrahedral amorphous Carbon (ta-c) Content: Who are we? What are we doing? Why are
More informationNew generation of solar cell technologies
New generation of solar cell technologies Emerging technologies and their impact on the society 9th March 2017 Dhayalan Velauthapillai Professor, Faculty of Engineering and Business Administration Campus
More informationMedia Information. Desulphurisation of biogas using metal alloy foam On the winning side economically and ecologically
Media Information Desulphurisation of biogas using metal alloy foam On the winning side economically and ecologically The desulphurisation of biogas is a prerequisite for its efficient use. When it comes
More informationTransparent zinc oxide
Transparent zinc oxide Umicore Umicore is a specialty materials group which employs some 13.000 people, has industrial operations on all continents and serves a global customer base. Its activities are
More informationSpecial Electrically Resistant Heated Furnaces
Special Electrically Resistant Heated Furnaces Drying of Ceramic Components Autor: Roland Waitz, Malte Möller Many ceramic masses are fabricated in plastic or liquid condition by addition of water. In
More informationPolymer Nanocomposites for Medical Applications
Department of Bioengineering Liu Research Group www. Liugroup.org Polymer Nanocomposites for Medical Applications Huinan Liu, Ph.D. Department of Bioengineering Interdisciplinary Materials Science and
More informationPreparation and characterization of nanostructured thermoelectric materials
QuickTime et un décompresseur TIFF (non compressé) sont requis pour visionner cette image. Preparation and characterization of nanostructured thermoelectric materials Laboratoire de Physique des Matériaux,
More informationAVM Ceramics. Metallurgy Paper & Pulp Thermal
AVM Ceramics Metallurgy Paper & Pulp Thermal AVM Ceramics AVM Ceramics GmbH (Advanced Versatile Materials) The demands on an increasing technological advancement in material products worldwide dictates
More informationIsolation of elements
1 In an IC, devices on the same substrate must be isolated from one another so that there is no current conduction between them. Isolation uses either the junction or dielectric technique or a combination
More informationPlasma and Beam Equipment for Materials Processing (Education and Science)
Tomsk Polytechnic University (TPU) Physics and Technology Institute (PTI) Plasma and Beam Equipment for Materials Processing (Education and Science) Prof. Valery Krivobokov Russia, Siberia and Tomsk Moscow
More informationIKA Mixing and Processing Technology
IKA Mixing and Processing Technology German technology made in the USA The Partner for the Chemical Industry SERVICE QUALITY AVAILABILITY IKA Proudly Manufactures in the USA IKA Mixing and Processing Technology
More informationSession 1A4a AC Transport, Impedance Spectra, Magnetoimpedance
Session 1A4a AC Transport, Impedance Spectra, Magnetoimpedance Magneto-impedance of [Co 40Fe 40B 20/Cu] Multilayer Films S. U. Jen, T. Y. Chou, C. K. Lo,.................................................................
More informationEFFECT OF MANGANESE SUBSTITUTION ON Co Ga AND Co Tl FERRITE NANOPARTICLES PREPARED BY HYDROTHERMAL ROUTE
EFFECT OF MANGANESE SUBSTITUTION ON Co Ga AND Co Tl FERRITE NANOPARTICLES PREPARED BY HYDROTHERMAL ROUTE Gayathri.S 1, Kalainathan.S 2 1,2 Center for Crystal Growth, VIT University, Vellore - 14, Tamil
More informationCalcined. Neuburg Siliceous Earth. as Anti-blocking Agent. in PET Films. Hubert Oggermüller. Approval: February VM / Dr.
VM-0/02.2013/06165980 Authorship: Translation: Petra Zehnder Hubert Oggermüller Dr. Horst E. Toussaint Approval: February 2013 VM / Dr. Alexander Risch Calcined Neuburg Siliceous Earth as Anti-blocking
More informationPRODUCT RANGE Germany
PRODUCT RANGE Germany KRAHN CHEMIE A STRONG PARTNER WELCOME TO KRAHN CHEMIE. As an independent chemical distributor and sales partner to leading producers, we know that some things are simply better together.
More informationBIOACTIVE SILICIUM-CONTAINING COATINGS ON TITANIUM SUBSTRATE
Powder Metallurgy Progress, Vol.11 (2011), No 3-4 271 BIOACTIVE SILICIUM-CONTAINING COATINGS ON TITANIUM SUBSTRATE O. S. Antonova, V. V. Smirnov, S. M. Barinov, N. V. Bakunova, Ľ. Medvecký, J. Ďurišin
More informationSynthesis, Permeability and Microstructure of the Optimal Nickel-Zinc Ferrites by Sol-Gel Route
J. Electromagnetic Analysis & Applications, 2010, 2: 56-62 doi:10.4236/jemaa.2010.21009 Published Online January 2010 (http://www.scirp.org/journal/jemaa) Synthesis, Permeability and Microstructure of
More informationtrue grit minerals CUMI lative range of EMD PRODUCT CATALOG 100 years US $ 3 billion 29 companies +30,000 people MURUGAPPA GROUP
MURUGAPPA GROUP 100 years US $ 3 billion 29 companies +30,000 people EMD ELECTRO MINERALS DIVISION CUMI lative range of true grit minerals PRODUCT CATALOG FUSED PRODUCTS MACRO REGULAR BROWN FUSED ALUMINA
More informationApplied Research for Vacuum Web Coating: What is Coming Next?
Applied Research for Vacuum Web Coating: What is Coming Next? Matthias Fahland, John Fahlteich, Steffen Günther, Manuela Junghähnel, Claus Luber, Nicolas Schiller, Cindy Steiner, Steffen Straach, Michiel
More informationCHARACTERIZATION OF WC-Co THERMAL SPRAY COATINGS BASED ON THE COMPOSITE POWDERS
Powder Metallurgy Progress, Vol.6 (2006), No 1 34 CHARACTERIZATION OF WC-Co THERMAL SPRAY COATINGS BASED ON THE COMPOSITE POWDERS P. Peetsalu, S. Zimakov, J. Pirso, V. Mikli, R. Tarbe, P. Kulu Abstract
More information