Universidad de Oviedo, Unidad Asociada al Departamento de Metalurgia Primaria del
|
|
- Cuthbert Palmer
- 6 years ago
- Views:
Transcription
1 de la Universidad de Primera Jornada de Encuentros Empresas- s de Investigación. CEMACC-04/03/2011 Escuela Politécnica de Ingeniería de Gijón Research Group from the Oviedo University (Spain) : Siderurgy, Metallurgy & Materials (SID-MET-MAT)
2 General Information PRINCIPAL RESEARCHER LUIS FELIPE VERDEJA GONZÁLEZ MEMBERS Luis Felipe Verdeja González José Ignacio Verdeja González José Pedro Sancho Martínez Ángel Alfonso Fernández María Florentina Barbés Fernández José Antonio Pero-Sanz Elorz Roberto Parra Figueroa Roberto González Ojeda Piotr Rusek Piela Rafael Colás Ortiz Antonio González Busto Celia Marcos Pascual Elena Brandaleze Etchebarne José Ovidio García García Irene Rodríguez Marcos Begoña Fernández Pérez Érika Marinas García Miguel Ángel Barbés Fernández TECHNOLOGY AND KNOWLEDGE SIMULATION AND DESIGN OF HIGH TEMPERATURE PROCESSING OF MATERIALS
3 Recognition This group of Extractive Metallurgy and Metallurgical Engineering from the University of Oviedo was awarded a credential of I+D associated unit to the CSIC by means of the CENIM. (Madrid, April 23 rd, 2008)
4 Research Lines in recent 5 years Ferrous Metallurgy (SID) Processes and Basic Operations in Extractive Ferrous Metallurgy: Thermodynamic studies (Thermo-Calc and HSC). Analyzed process by neuro-fuzzy systems (Matlab Simulink). Blast Furnace: Design of Blast-Furnace Hearth. Operational criteria. Simulation of processes. Electric furnace lining and cupola lining: Design and simulation of new processes.
5 Research Lines in recent Departamento 5 years de Nonferrous Metallurgy (MET) Copper Metallurgy: Byproducts, Waste and Recovery Materials. Design Furnaces. Arsenic Problem. Zinc Metallurgy: Fluid bed simulation. Heat and material transport. Increase of productivity. Casting Technology. Aluminium Metallurgy: Fluoride Byproducts from the Aluminium Electrolysis. Design cell. Metals of Ferroalloys: Primary Metallurgy. Design Furnaces.
6 Research Lines in recent 5 years Materials (MAT) Carbon Steel: Ferritic, Ferritic-Pearlitic and Pearlitic Steels. Ultrafine-grain steel with high elastic limit. Nanotechnology of precipitates during hot deformation (Precipitation Hardening) Cement Technology: Clinker Production in Rotary Furnace. New Designs. Combination of Rotary Furnace and Fluidized Bed Technologies (Decrease of Rotary Furnace Length) Corrosion Tests of Refractories and Ceramics at High Temperatures (Metallurgical Industry, Cement Industry and Glass Industry)
7 Introduction of the Green Energy in Processes of the Primary Metallurgy and in the Production of Materials Wind Energy. Solar Thermal Energy: Solar furnace in the Pilot Plant of Almería (Spain) Heating flow in primary industries by means of Solar Thermal Energy. Examples: Heating of ammonia (gas) for the synthesis of ammonium sulphate / nitrate. Heating water introducing into sinter machine of iron minerals in steel plants
8 Industrial Simulations Until now, the simulations carried out by this research group has been connected with the following topics in heat transport: Blast-Furnace Hearth Molybdenum electrode for a glass melting furnace
9 Other Simulations Pierce-Smith Converter Hot-Metal Transfer Car Rotary Furnace Refractory Bars
10 Scientific Publications All this research has generated a considerable amount of scientific publications, articles in indexed journals, conference papers, dissertations and theses, as expected in an educational and research centre. The most recent publications are the following: Mechanisms knowledge of the fluid and wear in blast furnace hearth with the Nodal Wear Model. Archives of Metallurgy and Materials (Poland). (No.4/ 2010). Some kinetics aspects of chlorine solid reactions. Revista de Metalurgia. (Madrid, Spain): Rev. Metal. Madrid (Vol. 46; No. 1/2010).
11 Books by members of the group
12 Cathedral of Oviedo de la Universidad de Thank you for your attention
CEM - Science and Engineering of Materials
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 712 - EM - Department of Mechanical Engineering Academic year: Degree: 2017 BACHELOR'S
More informationPelletizing technologies for iron ore
Pelletizing technologies for iron ore The Outokumpu partnership As one of the world s leading developers and suppliers of technology, Outokumpu Technology designs and delivers plants, processes and equipment
More informationREFORMS IN EDUCATIONAL PATTERN OF METALLURGICAL ENGINEERING
REFORMS IN EDUCATIONAL PATTERN OF METALLURGICAL ENGINEERING U.K. Chatterjee Emeritus Professor Department of Metallurgical and Materials Engineering IIT Kharagpur 721302 The Beginning. Department of Geology,
More informationPowder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering
Powder Metallurgy Science, Technology and Materials Anish Upadhyaya Associate Professor Department of Materials Science and Engineering Indian Institute of Technology Kanpur, India G S Upadhyaya Former
More informationProperties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity??
CLASS: X NCERT (CBSE) SCIENCE: Chemistry Page: 1 Question 1: Compare the properties of a typical metal and a non-metal on the basis of the following. Fill in Column A, B. Properties A Metal B Non- metal
More informationCHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY, BHILAI
SCHEME OF TEACHING AND EXAMINATION M. Tech. in Steel Technology FIRST SEMESTER S. No. Board of Study 1. Metallurgical 2. Metallurgical 3. Metallurgical 4. Metallurgical 5. Metallurgical 6. Metallurgical
More informationManufacturing Technologies University of Rome Tor Vergata
Manufacturing Tech (6 cr) + Metallurgy (3 cr) Initial introduction (1 week) Timetable 6 credits (54-60 h) End of the course: 28 giugno Type of examination Written test Oral test (mandatory) Average of
More informationMetallurgical Gas Cleaning System Design for Emissions Control and Energy Efficiency
Metallurgical Gas Cleaning System Design for Emissions Control and Energy Efficiency Paykan Safe and Matt Russell WorleyParsons GCT 111 Ferguson Court Suite 103 Irving, TX, USA 75062 ABSTRACT Metallurgical
More informationOutline CASTING PROCESS - 2. The Mold in Casting. Sand Casting Mold Terms. Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia
Outline CASTING PROCESS - 2 Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia Casting Molds Gating system pouring basin, sprue, runner, gate Riser Core Heating and melting Melting furnaces Pouring
More informationHORNOS Y METALES S.A
HORNOS Y METALES S.A THE COMPANY I COMPANY HORNOS Y METALES S.A. FOUNDED 1988 BY MR. ANGEL AGUIRRE PASTO TURNOVER 8 MILLON EUROS IN 2011 30% SALES INCREASE SINCE 2009 MAJOR COMPLETED PROJECT 1,550.000
More informationIntroduction: Ferrous alloys - Review. Outline. Introduction: Ferrous alloys
Introduction: Ferrous alloys - Review Outline Introduction - Review - Ferritic SS - Austinitic SS - Matensitic SS - Precipitation Hardenable SS Cast Irons - Gray CI - Ductile CI - White CI - Malleable
More informationAPPLICATIONS OF Fe-C PHASE DIAGRAM
APPLICATIONS OF Fe-C PHASE DIAGRAM KEY POINTS OF Fe-C Diagram Phases: Liquid Fe-Tmin=1148C @ 4.3%C 1394 C
More information001- Engineering Skills Principles-1. Chapter - 03 Material
001- Engineering Skills Principles-1 Chapter - 03 Material 1 Objective of Chapter 3.0 (Material) The aim of this section is to enable the candidate to: 1. Identify metals and compare their properties.
More informationGENARAL INTRODUCTION TO METALLURGY :Std: XI-CHEMISTRY
GENARAL INTRODUCTION TO METALLURGY :Std: XI-CHEMISTRY 1. What is matrix? The ore is generally associated with rock impurities like clay, sand etc. called gangue or matrix 2. What is mineral? The natural
More informationR E C R Y S T A L L I Z E D
F U R N A C E S RECRYSTALLIZED SILCARB, AN ISO-9001-2008 COMPANY HAS BEEN IN THE FIELD OF MANUFACTURING SILICON CARBIDE HEATING ELEMENTS AND FURNACES FOR THE LAST 3 DECADES... SILCARB SPECIALIZES IN THE
More informationRHI Refractory Solutions - a Reliable Partner for the Ferroalloys Industry
RHI Refractory Solutions - a Reliable Partner for the Ferroalloys Industry Ch.Wenzl 1 and A. Spanring 1 1 RHI AG Vienna, Wienerbergstrasse 9, 1100 Vienna, Austria; christine.wenzl@rhi-ag.com ABSTRACT RHI
More informationspinels in SO 2 O 4, MgAl 2
Processing Application of Ceramics 10 [1] (2016) 25 1 DOI: 10.2298/PAC1601025G Thermochemistry of Mg Mg Mg spinels in SO 2 S atmosphere Anna Gerle 1 Jerzy Piotrowski 2 Jacek Podwórny 1 1 Institute of Ceramics
More informationRHEOLOGICAL BEHAVIOUR OF CHOSEN LIQUID FERROUS SOLUTIONS. Marta Korolczuk-Hejnak, Piotr Migas, Wojciech Ślęzak
RHEOLOGICAL BEHAVIOUR OF CHOSEN LIQUID FERROUS SOLUTIONS Marta Korolczuk-Hejnak, Piotr Migas, Wojciech Ślęzak AGH-University of Science and Technology, 30-059 Krakow, 30 Mickiewicza Av., mkorolcz@agh.edu.pl
More informationNONFERROUS METALS AND ALLOYS
NONFERROUS METALS AND ALLOYS Chapter 7 7.1 Introduction Usage of nonferrous metals and alloys has increased due to technology Possess certain properties that ferrous materials do not have Resistance to
More informationMAME - Metallic Materials
Coordinating unit: 295 - EEBE - Barcelona East School of Engineering Teaching unit: 702 - CMEM - Department of Materials Science and Metallurgy Academic year: Degree: 2017 BACHELOR'S DEGREE IN MATERIALS
More informationNon-Ferrous-Metallurgy in Aachen -Short Department Presentation B. Friedrich
Non-Ferrous-Metallurgy in Aachen -Short Department Presentation B. Friedrich IME Process Metallurgy and Metal, RWTH Aachen University Prof. Dr.-Ing. Dr. h.c. Bernd Friedrich Our business education in non-ferrous
More informationUddeholm Formvar. FORMVAR is a trade mark registered in the European Union
Uddeholm Formvar FORMVAR is a trade mark registered in the European Union UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright
More informationMaterials Engineering PTT 110
By: Pn. Nurul Ain Harmiza Abdullah Materials Engineering PTT 110 SEMESTER 1 (2013/2014) PowerPoint Lecture Slides for Foundations of Materials Science and Engineering Fifth Edition William F. Smith Javad
More informationIRONMAKING and THEORY AND PRACTICE. Ahindra Ghosh Amit Chatterjee
IRONMAKING and STEELMAKING THEORY AND PRACTICE Ahindra Ghosh Amit Chatterjee IRONMAKING AND STEELMAKING IRONMAKING AND STEELMAKING Theory and Practice AHINDRA GHOSH Formerly Professor Materials and Metallurgical
More informationThe surface layer of austempered ductile iron investment castings properties
ARCHIVES of FOUNDRY ENGINEERING Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 9 Issue 1/2009 157-162 35/1 The surface layer of austempered
More informationtrue grit minerals CUMI lative range of EMD PRODUCT CATALOG 100 years US $ 3 billion 29 companies +30,000 people MURUGAPPA GROUP
MURUGAPPA GROUP 100 years US $ 3 billion 29 companies +30,000 people EMD ELECTRO MINERALS DIVISION CUMI lative range of true grit minerals PRODUCT CATALOG FUSED PRODUCTS MACRO REGULAR BROWN FUSED ALUMINA
More informationTHE THERMOVISION MEASUREMENT OF TEMPERATURE IN THE IRON-ORE SINTERING PROCESS WITH THE BIOMASS
Acta Metall. Slovaca Conf. 56 THE THERMOVISION MEASUREMENT OF TEMPERATURE IN THE IRON-ORE SINTERING PROCESS WITH THE BIOMASS Jaroslav Legemza 1)*, Mária Fröhlichová 1), Robert Findorák 1) 1) Department
More informationIN SAFE HANDS. Apparatus Construction Division EXPERTISE EXPERIENCE EXCELLENCE BORNE OF OFFERING YOU
Apparatus Construction Division IN SAFE HANDS EXPERTISE BORNE OF EXPERIENCE OFFERING YOU EXCELLENCE Knowhow and Leading Edge Technology for non-ferrous products made in Germany Since the company was founded
More informationLecture 11: Metallic Alloys
Part IB Materials Science & Metallurgy H. K. D. H. Bhadeshia Course A, Metals and Alloys Lecture 11: Metallic Alloys TRIP Steels A phase change can do work; a good example of this is how viruses infect
More informationTHE ANALYSIS OF FORGING INCONEL 718 ALLOY. Aneta ŁUKASZEK-SOŁEK, Janusz KRAWCZYK, Piotr BAŁA, Marek WOJTASZEK
THE ANALYSIS OF FORGING INCONEL 718 ALLOY Aneta ŁUKASZEK-SOŁEK, Janusz KRAWCZYK, Piotr BAŁA, Marek WOJTASZEK AGH University of Science and Technology, 30-059 Krakow, 30 Mickiewicza Av., e-mail address:
More informationBlast Furnace Hearth Lining: Post Mortem Analysis
Materials Research. 2017; 20(3): 814-818 2017 DOI: http://dx.doi.org/10.1590/1980-5373-mr-2016-0875 Blast Furnace Hearth Lining: Post Mortem Analysis Bruno Vidal de Almeida a *, Elton Silva Neves b, Sidiney
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationExperts in Furnaces. Engineering. Fast and flexible. THERMCONCEPT powerd by innovation
Dental Furnaces Sintering furnaces for Zirkonia Chamber Furnaces for Dental Ceramic Compounds Furnaces for CAD / CAM - Systems Pre-heating Furnaces Muffle Furnaces Model Casting Accessories Experts in
More informationALUMINUM POWDER METALLURGY
ALUMINUM POWDER METALLURGY Increased demand for light weight components, primarily driven by the need to reduce energy consumption in a variety of societal and structural components, has led to increased
More informationThyssenKrupp Materials Austria GmbH
GmbH Group Organisation Business Area Materials Services 2 Company History TKMA 3 Head Office Vienna - Freudenau Harbour Warehouse area 8.000 m² Office space 1.200 m² 69 employees 17 Band saws 1 Plasma
More informationTypes of Metal Alloys
Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon
More informationChromium research at SINTEF and NTNU Eli Ringdalen, SINTEF
Chromium research at SINTEF and NTNU Eli Ringdalen, SINTEF SINTEF - Who we are Our vision -Technology for a better society Independent non-profit research institute >90 % of income from contract R&D, Turnover
More informationModeling Grain Structures of Some Carbon Steels using Voronoi Tesselation
Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.3, pp.309-314, 2011 jmmce.org Printed in the USA. All rights reserved Modeling Grain Structures of Some Carbon Steels using Voronoi
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Metals and alloys Unit 3 Materials and their working properties 3 Objectives Know the primary sources of materials for producing metals and alloys Be able to recognise
More informationPLANSEE SEMINAR International Conference on Refractory Metals and Hard Materials. First Circular
19 PLANSEE SEMINAR 2017 International Conference on Refractory Metals and Hard Materials Reutte/Austria 29 May 2 June, 2017 First Circular 19 th Plansee Seminar, 29 May - 2 June, 2017 Message from the
More informationPRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS
PRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS J. Kerr and R. Paton Mintek, Private Bag X3015, Randburg. 2125. South Africa. E-mail: jonathank@mintek.co.za ABSTRACT
More informationA SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND ROBOTICS ISSN 2320-7345 A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS 1 R.Raja, 2 M.Rajkumar 1 Assistant Lecturer, St. Joseph College
More informationPrecipitation hardening of Cu-Be alloys
ISSN(Print) : 2320 1967 ISSN(Online) : 2320 1975 ChemXpress 5(4), 132-136, (2014) Precipitation hardening of Cu-Be alloys Enrique Rocha-Rangel*, José A.Rodríguez-García, Constantin A.Hernández-Bocanegra
More informationI. Materials Properties and Cathode Construction 1 INTRODUCTION 1 THE CARBON LINING 4
Table of Contents Table of Contents I. Materials Properties and Cathode Construction 1 I. Materials Properties and Cathode Construction 1 INTRODUCTION 1 INTRODUCTION 1 THE CARBON LINING 4 THE CARBON LINING..
More informationCarlos Ruiz de Veye. Total recovery of Spent Pot Liner (SPL) using the Befesa process
Carlos Ruiz de Veye Total recovery of Spent Pot Liner (SPL) using the Befesa process Today Befesa is a technological company that provides sustainable solutions for industrial waste recycling Industrial
More informationENGINEERING MATERIALS
[ MATERIAL Science ] By Rangwala ` 225.00 Edition : 43 rd Edition : 2017 (Reprint) ISBN : 9789385039171 Size : 170 mm 235 mm Binding : Paperback Pages : 480 + 24 = 504 About the book This well-known text-book
More informationINTRODUCTION AND OVERVIEW OF MANUFACTURING. Manufacturing is Important. Manufacturing - Technologically Important
INTRODUCTION AND OVERVIEW OF MANUFACTURING 1. What is Manufacturing? 2. Materials in Manufacturing 3. Manufacturing Processes 4. Production Systems 5. Organization of the Book Manufacturing is Important
More informationHot Forging Behaviour of Sintered AISI 8720 P/M Steels
Hot Forging Behaviour of Sintered AISI 8720 P/M Steels 1 L. Arulmani, 2 K.S. Pandey 1 Dept. of Mechanical Engineering, R.R. Institute of Technology, Bangalore, India. 2 Department of Metallurgical and
More informationD.1 High Integrity Magnesium Automotive Castings (HI-MAC)
D.1 High Integrity Magnesium Automotive Castings (HI-MAC) STATEMENT OF WORK Objective Vehicle weight reduction is a key enabler to meet future stringent CAFE requirements, and this can best be achieved
More informationEffect of Heat Treatment Parameters on the Toughness of Unalloyed Ausferritic Ductile Iron
ARCHIVES of FOUNDRY ENGINEERING DOI: 10.1515/afe-2016-0030 Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 16 Issue 2/2016 79 84 Effect
More informationUddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
UDDEHOLM DIEVAR Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make
More informationCOURSE STRUCTURE INTERNATIONAL UNDERGRADUATE
COURSE STRUCTURE INTERNATIONAL UNDERGRADUATE METALLURGY & materials ENGINEERING KODE SUBJECT SKS 1st Semester ENGE 6 1 0001 Calculus 1 3 UIGE 6 1 0002 Academic Writing 3 ENGE 6 1 0005 Physics (Mechanic
More informationAdvanced Master Course Process Technology of Metals
Institut für Eisenhüttenkunde Rheinisch-Westfälische Technische Hochschule Aachen Advanced Master Course Process Technology of Metals (Part: Ferrous Process Metallurgy) Prof. Dr.-Ing. D. Senk 16-04-2010
More informationAutomotive Recycling. 4 Shredder operation and post shredder Technologies. Prof. Dr.-Ing. Joachim Schmidt
Prof. Dr.-Ing. Joachim Schmidt Automotive Recycling Engineering Workshop at the Nelson Mandela Metropolitan University NMMU Port Elizabeth South Africa 2011 4 Shredder operation and post shredder Technologies
More informationRESISTANCE WELDING MANUAL
FTZSTSTA RWMA RESISTANCE WELDING MANUAL Revised Fourth Edition RWMA CONTENTS PREFACE ACKNOWLEDGEMENTS Section 1 PROCESSES Fundamentals Of Resistance Welding ;M INTRODUCTION 1-1 RESISTANCE WELDING PROCESSES
More informationBrimacombe Lecture. Research on Sustainable Steelmaking
Brimacombe Lecture Research on Sustainable Steelmaking R. J. Fruehan Center for Iron and Steelmaking Research Materials Science and Engineering Department Carnegie Mellon University Pittsburgh PA Tel:
More informationMICROSILICA - Finding new ways of using the well-known product
November, 2015 Experience in R&D&I projects Inprosol Sp. z o.o. is a new start-up company, interested in a broad range of innovative and environmentally friendly solutions in the ferroalloys and foundry
More informationAISI A2 Cold work tool steel
T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability
More informationTHE EFFECT OF ALLOYING ELEMENTS ON THE TEMPERATURE RANGE OF PEARLITE TO AUSTENITE TRANSFORMATION IN LOW ALLOY HYPOEUTECTOID STEELS
THE EFFECT OF ALLOYING ELEMENTS ON THE TEMPERATURE RANGE OF PEARLITE TO AUSTENITE TRANSFORMATION IN LOW ALLOY HYPOEUTECTOID STEELS PAWŁOWSKI Bogdan 1, BAŁA Piotr 1,2, DZIURKA Rafał 1 1 AGH University of
More informationManufacture of Iron & Steel. Prepared By: John Cawley
Manufacture of Iron & Steel Prepared By: John Cawley Presentation Objectives Identify the basic steps in the production of steel. Identify the properties and uses of iron ore and pig iron. Differentiate
More informationSEMA SIMAI Springer Series
SEMA SIMAI Springer Series Series Editors: Luca Formaggia Pablo Pedregal (Editors-in-Chief) Jean-Frédéric Gerbeau TereMartinez-SearaAlonso Carlos Parés Lorenzo Pareschi Andrea Tosin Elena Vazquez Jorge
More informationKeywords: Warm Forming, Warm Temperature, Plasticity, Forgeability, Pressure test, Simulation
1 Slovak University of Technology in Bratislava, Faculty of Material Science and Technology in Trnava, Institute of Production Technologies, Slovak Republic Abstract. Warm forming is most commonly used
More informationAMETAL AMETAL AMETAL APPLICATIONS GENERAL
AMETAL - TA S DEZINCIFICATION RESISTANT COPPER ALLOY AMETAL is a patented special copper alloy, combining excellent corrosion resistance with high mechanical strength. 1 AMETAL TA s dezincification-resistant
More informationMachinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
More informationL Blast Furnace Hearth Refractories Findings and Repair at Severstal Sparrows Point
L Blast Furnace Hearth Refractories Findings and Repair at Severstal Sparrows Point THIS ARTICLE IS AVAILABLE ONLINE AT AIST.ORG FOR 30 DAYS FOLLOWING PUBLICATION. Sparrows Point L furnace was commissioned
More informationCourse ID Course Name Course Outcome Technical Mathematics in Air Conditioning and Refrigeration
Course ID Course Name Course Outcome AIRC 10 Technical Mathematics in Air Conditioning and Refrigeration Course completers will apply Fan Laws to assess and successfully adjust air flow Course completers
More informationManganese concentrate usage in steelmaking
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Manganese concentrate usage in steelmaking To cite this article: O I Nokhrina and I D Rozhihina 2015 IOP Conf. Ser.: Mater. Sci.
More information2890 Ligonier St. Latrobe, PA Phone Fax Toll Free
Your Best Choice For Carbide Components 2890 Ligonier St. Latrobe, PA 15650 Phone 724.532.3041 Fax 724.532.3043 Toll Free 800.862.7066 www.extramet.net OUR HISTORY OUR MISSION Extramet s Primary Objective
More informationPrincipals of Billet Making
Billet quality directly controls the quality of extrusions and affects productivity, in term profitability. The quality of billets& cost are the two important considerations for extrusion producers. Day
More informationThis article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research and
This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research and education use, including for instruction at the authors institution
More informationSINTERABILITY OF HIGH-SPEED STEELS M2, M3/2 AND T15
SINTERABILITY OF HIGH-SPEED STEELS, M3/2 AND Romário Mauricio Urbanetto Nogueira CEFET/PR UNED/MD romarioun@ig.com.br César Edil da Costa DEM-CCT/UDESC edil@joinville.udesc.br Keywords high speed steels,
More informationSurface treatments fundamental Carburising Nitriding Cyaniding and carbonitriding Induction and flame hardening
Surface Treatments t of Steels Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Today s Topics Surface treatments fundamental Cyaniding and carbonitriding Induction and flame hardening Reference: 1.
More informationThe Basics of Dezincification
The Basics of Dezincification Larry Muller Director, Metallurgy and Technical Services Chase Brass and Copper Company, LLC. Montpelier, OH 1 Presentation Summary This presentation is not to be copied or
More informationELECTRIC INDUCTION FURNACE
ELECTRIC INDUCTION FURNACE The electric induction furnace is a type of melting furnace that uses electric currents to melt metal. Induction furnaces are ideal for melting and alloying a wide variety of
More informationChallenges and limiting factors for the Recycling of steel scrap in Europe
Challenges and limiting factors for the Recycling of steel scrap in Europe International Workshop on Technospheric Mining 2 nd October 2015 Philip Bundschuh Table of Content Scrap availability trading
More informationEffect of Heat Treatment on Microstructure and Mechanical Properties of Medium Carbon Steel
International Journal of Engineering Research and Development ISSN: 2278-067X, Volume 2, Issue 1 (July 2012), PP. 07-13 www.ijerd.com Effect of Heat Treatment on Microstructure and Mechanical Properties
More informationPSection P. Sec. P Page 1
PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................
More informationProduction of Sponge Iron by Oxidation Roast and Carbothermic Reduction of Ok Tedi Pyrite concentrates
7 th HUON SEMINAR ACHIEVING VISION 2050 THROUGH HIGHER EDUCATION, RESEARCH, SCIENCE & TECHNOLOGY November 13 th to 14 th 2013, Papua New Guinea University of Technology, Lae, Papua New Guinea HS7-2013-037
More informationMME 291: Lecture 15. Surface Hardening of Steels. Today s Topics
MME 291: Lecture 15 Surface Hardening of Steels Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Today s Topics Surface hardening fundamental Carburising Nitriding Cyaniding and carbonitriding Induction
More informationISOTHERMAL FORGING OF P/M FeAl ALLOYS. T. ŚLEBOD, S. BEDNAREK, A. Łukaszek-SOLEK
ISOTHERMAL FORGING OF P/M FeAl ALLOYS T. ŚLEBOD, S. BEDNAREK, A. Łukaszek-SOLEK AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. Mickiewicza
More informationREDUCTION OF CO 2 EMISSION TO METHANE USING HYDROGENATION WITH NICKEL (110) SURFACE CATALYST
REDUCTION OF CO 2 EMISSION TO METHANE USING HYDROGENATION WITH NICKEL (110) SURFACE CATALYST G. Santoshi 1, Ch. SaiRam 2, M. Chaitanya 3 1,2,3 Civil Engineering,Miracle Educational Society Group of Institutions,
More informationSulzer Pumps. Cast Materials. The Heart of Your Process
Sulzer Pumps Cast Materials The Heart of Your Process Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users.
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationSTUDY ON SLAG RESISTANCE OF REFRACTORIES IN SUBMERGED ARC FURNACES MELTING FERRONICKEL
STUDY ON SLAG RESISTANCE OF REFRACTORIES IN SUBMERGED ARC FURNACES MELTING FERRONICKEL Dong HU 1 Pei-Xiao LIU 2 Shao-Jun CHU 1 1 School of Metallurgical and Ecological Engineering, University of Science
More informationMEASUREMENT OF THE OXYGEN POTENTIAL OF NON-FERROUS SLAGS WITH AN EX-SITU ELECTROCHEMICAL DEVICE
TMS (The Minerals, Metals & Materials Society, MEASUREMENT OF THE OXYGEN POTENTIAL OF NON-FERROUS SLAGS WITH AN EX-SITU ELECTROCHEMICAL DEVICE N. Moelans 1, B.
More informationTHE MICROSTRUCTURES AND HARDNESS ANALYSIS OF A NEW HYPOEUTECTOID STEELS WITH 0.3 % MO. Edyta ROŻNIATA
THE MICROSTRUCTURES AND HARDNESS ANALYSIS OF A NEW HYPOEUTECTOID STEELS WITH 0.3 MO Edyta ROŻNIATA AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationFinal Technical Report. Project Title: Melting Efficiency Improvement. Award Number: DE-FC36-04GO Project Period: (January 2004 June 2012)
Final Technical Report Project Title: Melting Efficiency Improvement Award Number: DE-FC36-04GO14230 Project Period: (January 2004 June 2012) Principal Investigator: Kent Peaslee, 573-341-4714, kpeaslee@mst.edu
More informationMelt corrosion of refractories in the nonferrous industry and the electric arc furnace: A thermochemical approach*
Pure Appl. Chem., Vol. 83, No. 5, pp. 1093 1104, 2011. doi:10.1351/pac-con-10-10-05 2011 IUPAC, Publication date (Web): 4 April 2011 Melt corrosion of refractories in the nonferrous industry and the electric
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationMetals I. Anne Mertens
"MECA0139-1: Techniques "MECA0462-2 additives : et Materials 3D printing", Selection", ULg, 19/09/2017 25/10/2016 Metals I Anne Mertens Introduction Outline Metallic materials Materials Selection: case
More informationThermocouple Quick Reference Guide. Aluminium Temperature Sensing Solutions from the Smelter to the Foundry
Thermocouple Quick Reference Guide Aluminium Temperature Sensing Solutions from the Smelter to the Foundry why pyrotek? Pyrotek is a global engineering leader and innovator of technical solutions, integrated
More informationExtrusion of complex shapes
Extrusion of complex shapes 1 Hot extrusion Hot extrusion is the process of forcing a heated billet to flow through a shaped die opening It is used to produce long, strait metal products of constant cross
More informationModule 1. Principles of Physical Metallurgy: an introduction to the course content. Lecture 1
Module 1 Principles of Physical Metallurgy: an introduction to the course content Lecture 1 Principles of Physical Metallurgy: an introduction to the course content 1 Keywords: Cost of metals & materials,
More informationPRODUCT LIST (REFRACTORIES)
PRODUCT LIST (REFRACTORIES) For IRON & STEEL INDUSTRY Coke Oven Silica Bricks Mullite, Mullite-silicon Carbide Bricks for Dry Quenching Fire Clay Bricks Hot Blast Stove Silimanite-Mullite & Andalusite
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationTable of Contents. Preface...
Preface... xi Chapter 1. Metallurgical Thermochemistry... 1 1.1. Introduction... 1 1.2. Quantities characterizing the state of a system and its evolution... 3 1.2.1. The types of operations... 3 1.2.2.
More informationDetermining the Coefficient of Friction. Part by by Ron Kurtus
Determining the Coefficient of Part by by Ron Kurtus Different types of coefficient The different types of friction are static, kinetic, deformation, molecular and rolling. Each has its own coefficient
More information