TT-P-1757B Type I, Class C, Aerosol Zinc Chromate Primer. A one component, alkyd base, corrosion inhibiting zinc chromate primer.

Size: px
Start display at page:

Download "TT-P-1757B Type I, Class C, Aerosol Zinc Chromate Primer. A one component, alkyd base, corrosion inhibiting zinc chromate primer."

Transcription

1

2 TT-P-1757B Type I, Class C, Aerosol Zinc Chromate Primer PRODUCT: TT-P-1757B TY.I, CL.C AEROSOL ZINC CHROMATE PRIMER A one component, alkyd base, corrosion inhibiting zinc chromate primer. DESCRIPTION: TT-P-1757B Ty.I, Cl.C Zinc Chromate Primer is a single component, zinc-chromate pigmented, low-moisture sensitivity primer primarily intended for spray application on surface treated aluminum or surface treated with pre- treatment coatings MIL-C-8514C or DOD-P-15328D. This primer may be used with or without top coating. When suitable thinned, this primer may be used for dip or flow-coat application. PROPERTIES: SOLIDS(Weight)... 59% Minimum FINENESS OF GRIND... 6 Minimum Zinc Chromate(Weight)... 85% Minimum of Pigment COLORS... Green & Yellow DRYING TIME: DRY HARD... Within 15 Minutes SHELF LIFE... 1 Year From Date/Mfg ADVANTAGES: (1). Corrosion Inhibiting (2). Use with or Without Topcoat (3). Fast Air Dry (4). Low Moisture Sensitivity (5). Meets Government Specifications APPLICATION: Apply by spraying thin, multiple coats on the substrate. Do not over spray thick one coat films, as running and sagging of the film will occur. For exterior use and non-ferrous metals, it is recommended that TT-P-1757B Ty.I Class C be applied over pre-treatment coating conforming to MIL-C-8514C or DOD-P-15328D.

3 SERIES ACRYLIC ENAMEL PRIMER PAGE 1 OF Series Acrylic Enamel Primer PRODUCT: A quick-dry acrylic enamel, rust-resistant primer. DESCRIPTION: A quick-dry acrylic enamel primer especially designed for providing a high degree of rust inhibitive properties. Griggs Acrylic Enamel Primer is specifically designed for use as a primer under all types of acrylic enamel topcoats. PROPERTIES: ADVANTAGES: USES: APPLICATION: COLORS... White,Gray & Red FINISH... Low Sheen SOLIDS(Weight) % SOLIDS(Volume) % WEIGHT/GAL lbs/gal DRYING TIMES: TO TOUCH mins. TO RECOAT... 2 Hours (1). Excellent Corrosion Resistance. (2). Fast Dry. (3). Excellent Automotive Primer. (4). Excellent Adhesion Most Substrates. (1). Steel. (2). Factories. (3). Pipes. (4). Automotive Primer. (5). Acrylic Enamel Undercoat. Spray application is the only recommended method due to product's quick-dry properties. Reduce at 10-15% by volume with xylol for spray. For small areas, brushing is possible if thinned with Synthetic Reducer 10-15% by volume.

4 SERIES ACRYLIC ENAMEL PRIMER PAGE 2 OF 2 PRODUCT: A quick-dry, rust-inhibitive acrylic enamel primer. SURFACE PREPARATION: All surfaces must be dry and free of oils, grease, dirt, rust and all foreign matter. Preprime galvanized or aluminum substrates with DOD-P Metal Pretreatment Wash Primer prior to applying acrylic enamel primer. For ferrous metals, minimum surface cleaning is Power Tool Cleaning per SSPC-SP Always pretest primer for compatibility with acrylic enamel topcoats before using for production runs. PRECAUTIONS: Use with adequate ventilation. Avoid contact with skin and eyes. Do not take internally. KEEP OUT OF THE REACH OF CHILDREN. Vapor Harmful. Wash hands after using.

5 944 ALKYD METAL PRIMER 200 SERIES PAGE 1 OF Series Alkyd Metal Primer PRODUCT: A lead-free, high-solids alkyd primer for ferrous metal. This product is a single- component, modified alkyd coatings formulated for maximum rust prevention. May be used interior or exterior. DESCRIPTION: PROPERTIES: A highly rust-resistant primer for ferrous metal. Griggs Alkyd Metal Primer is lead free with an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. Reformulated for lower VOC content. May be topcoated with many types of products, including alkyd, epoxy, oilbase, vinyl and latex paints. COLORS... Red, Gray and White SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE* sq.ft/gal DRYING TIME-AT 75 DEGREES F: TO TOUCH to 30 Minutes TO HANDLE... 2 to 4 Hours VEHICLE TYPE... Modified Alkyd * 1 Mil Dry Film. ADVANTAGES: (1). Rust-Inhibitive. (2). Fast-Dry. (3). Excellent Foundation. (4). Extremely Abrasion Resistant USES: (1). Steel (2). Machinery (3). Tanks (4). Railings (5). Equipment (6). Towers

6 945 ALKYD METAL PRIMER 200 SERIES PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Alkyd Metal Primers can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

7 SERIES CHLORINATED RUBBER PRIMER PAGE 1 OF Series Chlorinated Rubber Primer PRODUCT: A rust inhibitive, chlorinated rubber metal primer. DESCRIPTION: A chlorinated rubber base primer especially designed for providing a high degree of rust inhibitive properties. Griggs Chlorinated Rubber Primer is fast dry to provide the applicator the opportunity for multiple coats in the same day. It can withstand service in areas of excessive moisture, including water immersion. PROPERTIES: ADVANTAGES: USES: APPLICATION: COLORS... White,Gray & Red FINISH... Low Sheen SOLIDS(Weight)... 60% SOLIDS(Volume)... 35% WEIGHT/GAL lbs/gal DRYING TIMES: TO TOUCH mins. TO RECOAT... 1 hour (1). Excellent Corrosion Resistance. (2). Fast Dry. (3). Interior/Exterior Use. (4). Excellent Adhesion Most Substrates (1). Chemical Plants (2). Factories (3). Pipes (4). Shower Rooms (5). Laundries Apply by brush, roller or spray methods. For brush and roll, thin with Synthetic Reducer at 10-15% by volume. For spray application, thin with Xylol at 10-15% by volume.

8 SERIES CHLORINATED RUBBER PRIMER PAGE 2 OF 2 PRODUCT: A rust inhibitive, chlorinated rubber metal primer. SURFACE PREPARATION: All surfaces must be dry and free of oils, grease, dirt, rust and all foreign matter. Preprime galvanized or aluminum substrates with DOD-P Metal Pretreatment Wash Primer prior to applying chlorinated rubber primer. For ferrous metals, minimum surface cleaning is Power Tool Cleaning per SSPC-SP For severe conditions or immersion service blast steel to White Metal Blast per SSPC-SP Prime metal immediately with Griggs Chlorinated Rubber Primer and follow with the recommended number of topcoats. Always spot test previously painted surfaces for lifting before applying this primer. If lifting occurs the old paint must be removed for best results. PRECAUTIONS: Use with adequate ventilation. Avoid contact with skin and eyes. Do not take internally. KEEP OUT OF THE REACH OF CHILDREN. Vapor Harmful. Wash hands after using.

9 948 GRIGGS MULTI-PURPOSE PRIMER 200 SERIES PAGE 1 OF Series Multi-Purpose Primer PRODUCT: A lead-free, high-solids primer for ferrous and non-ferrous metal. Multi-Purpose Primers are singlecomponent, modified alkyd coatings formulated for maximum rust prevention. DESCRIPTION: PROPERTIES: A highly rust-resistant primer for ferrous metal. Multi-Purpose primers are lead and chromate free with high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. Reformulated for lower VOC content. COLORS... White & Gray SOLIDS(Weight)*... 80% THEORETICAL COVERAGE* sq.ft/gal DRY FILM THICKNESS... 1 mil per coat dry DRYING TIME-AT 75 DEGREES F: TO TOUCH Minutes TO RECOAT... 2 To 4 Hours VEHICLE TYPE... Modified Alkyd VOLATILE ORGANIC COMPOUNDS(VOC) G/L WEIGHT/GAL* lbs/gal TEMPERATURE RESISTANCE... Up to 300 degrees F *Values may vary with color. ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements. (2). ASTM B117 Salt Fog Test: 500+ Hours. (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation (6). Extremely Abrasion Resistant USES: (1). Steel Structures (2). Metal Decks (3). Tanks (4). Railings (5). Metal Joists (6). Towers

10 949 GRIGGS MULTI-PURPOSE PRIMER 200 SERIES PAGE 2 OF 2 APPLICATION & REDUCTION: Multi-Purpose Primers (200 Series) can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

11 950 RATMOORE PRIMERS 200 SERIES PAGE 1 OF Series Ratmoore Primer PRODUCT: A lead-free, high-solids alkyd primer for steel and ferrous metals. Ratmoore Primers are singlecomponent, modified alkyd coatings formulated for maximum rust prevention. DESCRIPTION: PROPERTIES: ADVANTAGES: A highly rust-resistant primer for ferrous metal. Ratmoore primers are lead and chromate free with high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. COLORS... Red, Gray, White & Green SOLIDS(Volume)* % THEORETICAL COVERAGE* mil-sq.ft/gal DRY FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F: TO TOUCH Hours TO HANDLE Hours TO RECOAT Hours VEHICLE TYPE... Modified Alkyd VOLATILE ORGANIC COMPOUNDS(VOC)* G/L WEIGHT/GAL* lbs/gal TEMPERATURE RESISTANCE... Up to 250 degrees F *Values may vary with color. (1). Excellent "Wetting" of Steel (2). Lead Free Formulation (3). Low Sheen (4) Special Modified Alkyd Formulation (5). Excellent Corrosion Resistance (6). Excellent Foundation (7). Extremely Abrasion Resistant USES: (1). Steel (2). Machinery (3). Tanks (4). Railings (5). Equipment (6). Towers

12 951 RATMOORE PRIMERS 200 SERIES PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Ratmoore Primers can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

13 952 RATMOORE PRIMERS 200 SERIES 1990 REVISION PAGE 1 OF Series Ratmoore Primer 1990 Revision PRODUCT: A lead-free, high-solids alkyd primer for ferrous metal. Ratmoore Primers are single- component, modified alkyd coatings formulated for maximum rust prevention. DESCRIPTION: PROPERTIES: A highly rust-resistant primer for ferrous metal. Ratmoore primers are lead free and have an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. Reformulated for lower VOC content. Available for winter and summer formulation. COLORS... Full Spectrum(All Colors) SOLIDS(Volume)* % THEORETICAL COVERAGE* mil sq.ft/gal DRY FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 To 2 Hours TO RECOAT To 12 Hours VEHICLE TYPE... Modified Alkyd VOLATILE ORGANIC COMPOUNDS(VOC)* G/L AFTER THINNING G/L WEIGHT/GAL* lbs/gal TEMPERATURE RESISTANCE... Up to 300 degrees F *Values may vary with color. ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements. (2). ASTM B117 Salt Fog Test: 500+ Hours. (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation (6). Extremely Abrasion Resistant

14 953 RATMOORE PRIMERS 200 SERIES 1990 REVISION PAGE 2 OF 2 USES: (1). Steel (2). Machinery (3). Tanks (4). Railings (5). Equipment (6). Towers APPLICATION & REDUCTION: Griggs Ratmoore Primers 200 Series(Revised) can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

15 954 VINYL ACRYLIC PRIMER 200 SERIES PAGE 1 OF Series Vinyl Acrylic Primer PRODUCT: A waterbase, vinyl acrylic latex primer. DESCRIPTION: PROPERTIES: A low cost, vinyl acrylic latex primer for use on interior and exterior surfaces. May be used on many types of properly prepared surfaces including concrete, masonry, plaster, stucco and drywall. COLORS... Full Range SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft./gal DRYING TIME-AT 75 DEGREES F: TO TOUCH Minutes TO RECOAT Hours TO TOPCOAT Hours VEHICLE TYPE... Vinyl Acrylic ADVANTAGES: (1). Seals and Primes. (2). Low Cost. (3). Water-Base. (4). Interior and Exterior. (5). Low VOC, HAPS Free USES: (1). Masonry. (2). Concrete. (3). Dry Wall. (4). Stucco. (5). Plaster.

16 955 VINYL ACRYLIC PRIMER 200 SERIES PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Vinyl Acrylic Primer may be thinned with water if necessary. Use at packaged consistency for most applications. May be applied by brush, roll or spray. SURFACE PREPARATION: Surface must be clean and free of grease, oil, chalk, dust, and other contaminants. Loose or peeling paint must be removed by sanding, scraping, waterblast or sandblasting. All mildew must be removed before application. Remove by scrubbing with a solution made of 1 quart household bleach in 3 quarts of water. DO NOT ADD DETERGENTS OR AMMONIA TO THE BLEACH/WATER MIXTURE. Scrub to remove any contaminants. Careful surface preparation is the key to a long lasting and successful job. PRECAUTIONS: KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product. KEEP FROM FREEZING.

17 956 DEER VALLEY GRAY PRIMER 200A04 PAGE 1 OF 2 200A04 Deer Valley Gray Primer PRODUCT: A lead-free, high-solids alkyd primer for ferrous metals. Deer Valley primer is a one- component, modified alkyd primer formulated for maximum exterior durability. DESCRIPTION: A highly weather-resistant primer for ferrous metal. Deer Valley primer is lead free and has an extremely high solids content. These primers offer excellent "wetting" of the substrate in addition to excellent abrasion and weather resistance. This primer is specially formulated to resist damaging ultraviolet rays and severe weather conditions. PROPERTIES: COLOR... Grey Oxide SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft/gal DRY FILM THICKNESS mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 Hour TO RECOAT... 4 Hours VEHICLE TYPE... Modified Alkyd WEIGHT/GAL lbs/gal FINISH... Low to Flat Sheen ADVANTAGES: (1). Excellent Corrosion Resistance (2). Excellent Foundation for Wood & Metal (3). Extremely Abrasion Resistant (4). Excellent U.V. Resistance (5). Excellent Weather Resistance USES: (1). Steel (2). Machinery (3). Tanks (4). Wood (5). Equipment (6). Towers (7). Metal Surfaces

18 957 DEER VALLEY GRAY PRIMER 200A04 PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Deer Valley Primer is formulated for spray application. For spray application, thin up to 15% by volume with xylene. Brushing small areas is possible, thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. WOOD: Surface must be clean and free of all dirt and foreign material. Badly splintered or weathered wood should be sanded for best results. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read MSDS before use.

19 958 P GRAY PRIMER 200A08 PAGE 1 OF 2 200A08 P Gray Primer PRODUCT: A lead-free, high-solids alkyd primer for wood and ferrous metal. P-674 is a single- component, modified alkyd coatings formulated for maximum exterior durability. DESCRIPTION: A highly weather-resistant primer for wood and ferrous metal. P is lead free and has an extremely high solids content. These primers offer excellent "wetting" of the substrate in addition to excellent abrasion and weather resistance. This primer is specially formulated to resist damaging ultraviolet rays and severe weather conditions. PROPERTIES: COLOR... Light Gray SOLIDS(Weight) % VEHICLE SOLIDS(Weight) % THEORETICAL COVERAGE mil sq.ft/gal DRY FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 To 2 Hours TO RECOAT To 12 Hours VEHICLE TYPE... Modified Alkyd WEIGHT/GAL lbs/gal ACTIVE PIGMENTS... Zinc Oxide & Zinc Phosphate ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements. (2). ASTM B117 Salt Fog Test: 500+ Hours. (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation for Wood (6). Extremely Abrasion Resistant (7). Excellent U.V. Resistance (8). Excellent Weather Resistance

20 959 P PRIMER 200A08 PAGE 2 OF 2 USES: (1). Steel (2). Machinery (3). Tanks (4). Wood (5). Equipment (6). Towers (7). Exterior Wood Siding APPLICATION & REDUCTION: Griggs P Primer can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. WOOD: Surface must be clean and free of all dirt and foreign material. Badly splintered or weathered wood should be sanded for best results. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection.

21 960 TT-P-641G TYPE III ZINC PRIMER 200A16 PAGE 1 OF 2 200A16 TT-P-641G Type III, Zinc Primer PRODUCT: A two part, high-solids, zinc-dust, zinc oxide primer conforming to TT-P-641G Type III. Protects steel galvanically, thus preventing below film corrosion. DESCRIPTION: A heavy duty maintenance primer formulated for excellent characteristics over a wide range of chemical and atmospheric conditions. Typical uses: Underground pipes, off shore drilling rigs (above splash zone), water lines, refineries, structural steel and severe corrosive and chemical environments. PROPERTIES: COLOR... Gray PIGMENT(Weight)... 74% min VOLATILES(Weight)... 14% min THEORETICAL COVERAGE sq.ft.@ 2 mil FILM THICKNESS to 2.5 mils p/coat DRYING TIME-AT 75 DEGREES F TO TOUCH Hours DRY HARD Hours VEHICLE TYPE... Phenolic WEIGHT/GAL (Combined) lbs min. Pigment Type... Zinc-Dust/Zinc-Oxide Zinc Content DRY FILM... 79% min.by weight TOPCOATS: Acrylics, Alkyds, Chlorinated Rubber, and many other maintenance coatings, consult your Griggs Paint Technical Rep. USES: (1). Underground Pipes (2). Off Shore Rigs (Above splash zones) (3). Water Lines (4). Severe Corrosive Environments (5). Refineries (6). Tank Exteriors (7). Structural Steel

22 961 TT-P-641G TYPE III ZINC PRIMER 200A16 PAGE 2 OF 2 APPLICATION: Spray is the best method of application. Use air spray with agitated pressure pot or airless spray with continuous material mixing setup. Use brush for touch up only. Reduce with Xylol, approximately 1 pint of thinner to 1 gallon of mixed primer. SURFACE PREPARATION: SSPC-SP6 Commercial Blast or SSPC-SP10 Near White Blast. If drying time prior to recoating exceeds 48 hours at temperatures above 70 Degrees F, the dry coating must be brush-sandblasted to achieve proper adhesion of new coat. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting (SSPC-SP6) and primed the same day. PRECAUTIONS: Contents are Flammable Store 78 F. out of direct sunlight. Keep away from heat and open flame. Shelf life 6-9 months from date of Mfg. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

23 962 JET-DRI GRAY PRIMER 200A26 PAGE 1 OF 2 200A26 Jet-Dri Gray Primer PRODUCT: A lead-free, high-solids alkyd primer for wood and ferrous metal. Jet-Dri primer is a one- component, modified alkyd primer formulated for maximum exterior durability. DESCRIPTION: A highly weather-resistant primer for wood and ferrous metal. Jet-Dri is lead free and has an extremely high solids content. These primers offer excellent "wetting" of the substrate in addition to excellent abrasion and weather resistance. This primer is specially formulated to resist damaging ultraviolet rays and severe weather conditions. PROPERTIES: COLOR... Grey Oxide SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft/gal DRY FILM THICKNESS mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE minutes TO RECOAT... 2 Hours VEHICLE TYPE... Modified Alkyd WEIGHT/GAL lbs/gal FINISH... Low to Flat Sheen ADVANTAGES: (1). Excellent Corrosion Resistance (2). Excellent Foundation for Wood & Metal (3). Extremely Abrasion Resistant (4). Excellent U.V. Resistance (5). Excellent Weather Resistance USES: (1). Steel (2). Machinery (3). Tanks (4). Wood (5). Equipment (6). Towers (7). Metal Surfaces

24 963 JET-DRI GRAY PRIMER 200A26 PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Jet-Dri Primer is formulated for spray application. For spray application, thin up to 15% by volume with xylene or toluene. Brushing small areas is possible, thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. WOOD: Surface must be clean and free of all dirt and foreign material. Badly splintered or weathered wood should be sanded for best results. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection.

25 964 ADOT #1 ALKYD PRIMER 200A28 LIGHT GRAY PAGE 1 OF 2 200A28 ADOT #1 Alkyd Light Gray Primer PRODUCT: A lead-free, high-solids alkyd primer for ferrous metal. Griggs ADOT #1 Light Gray Alkyd Primer is manufactured according to pre-published ADOT requirements. DESCRIPTION: A highly rust-resistant primer for ferrous metal. ADOT #1 alkyd primer is lead free and has an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. May be applied over firm old alkyd or oilbase coatings as a barrier coat. This coating is extremely versatile due to its rich formulation. PROPERTIES: COLOR... Light Gray SOLIDS(Weight) % DRY FILM THICKNESS to 2.0 mils p/coat THEORETICAL 20% LOSS sq.ft./gal DRYING TIME-AT 75 DEGREES F: TACK FREE Hours DRY HARD Hours VEHICLE TYPE... Alkyd WEIGHT/GAL lbs/gal TEMPERATURE RESISTANCE... Up to 250 degrees F ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements. (2). ASTM B117 Salt Fog Test: 500+ Hours. (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation (6). Extremely Abrasion Resistant USES: (1). Steel (2). Machinery (3). Tanks (4). Bridges (5). Equipment (6). Towers

26 965 ADOT #1 ALKYD PRIMER 200A28 LIGHT GRAY PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs ADOT #1 Light Gray Alkyd Primer can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

27 966 ADOT #1 PHENOLIC PRIMER 200A28 LIGHT GRAY PAGE 1 OF 2 200A28 ADOT #1 Phenolic Light Gray Primer PRODUCT: A lead-free, high-solids phenolic alkyd primer for ferrous metal. Griggs ADOT #1 Light Gray Primer is manufactured according to pre- published ADOT requirements. DESCRIPTION: A highly rust-resistant primer for ferrous metal. ADOT #1 primer is lead free and has an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. May be applied over firm old alkyd or oilbase coatings as a barrier coat. This coating is extremely versatile due to its rich formulation. PROPERTIES: COLOR... Light Gray SOLIDS(Weight) % DRY FILM THICKNESS to 3.0 mils p/coat THEORETICAL 20% LOSS sq.ft./gal DRYING TIME-AT 75 DEGREES F: TACK FREE Hours DRY HARD Hours VEHICLE TYPE... Alkyd-Phenolic WEIGHT/GAL lbs/gal TEMPERATURE RESISTANCE... Up to 250 degrees F ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements. (2). ASTM B117 Salt Fog Test: 500+ Hours. (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation (6). Extremely Abrasion Resistant USES: (1). Steel (2). Machinery (3). Tanks (4). Bridges (5). Equipment (6). Towers

28 967 ADOT #1 PHENOLIC PRIMER 200A28 LIGHT GRAY PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs ADOT #1 Light Gray Primer can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

29 968 ABLE RATMOORE SERIES PAGE 1 OF 2 200A32 Able Ratmoore Series PRODUCT: A lead-free, high-solids alkyd primer for steel and ferrous metals. Ratmoore Primers are singlecomponent, modified alkyd coatings formulated for maximum rust prevention. DESCRIPTION: PROPERTIES: ADVANTAGES: A highly rust-resistant primer for ferrous metal. Ratmoore primers are lead and chromate free with high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. COLORS... Red, Gray & White SOLIDS(Volume)* % THEORETICAL COVERAGE* mil-sq.ft/gal DRY FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F: TO TOUCH Hours TO HANDLE Hours TO RECOAT Hours VEHICLE TYPE... Modified Alkyd VOLATILE ORGANIC COMPOUNDS(VOC)* G/L WEIGHT/GAL* lbs/gal TEMPERATURE RESISTANCE... Up to 250 degrees F *Values may vary with color. (1). Excellent "Wetting" of Steel (2). Lead Free Formulation (3). Low Sheen (4) Special Modified Alkyd Formulation (5). Excellent Corrosion Resistance (6). Excellent Foundation (7). Extremely Abrasion Resistant USES: (1). Steel (2). Machinery (3). Tanks (4). Railings (5). Equipment (6). Towers

30 969 ABLE RATMOORE SERIES PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Ratmoore Primer Able Series can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

31 970 TT-P A33 VULCRAFT TYPE GRAY PRIMER PAGE 1 OF 2 200A33 TT-P-636 Type Vulcraft Gray Primer PRODUCT: A lead-free, high-solids alkyd primer for ferrous metals. TT-P-636 M/W Vulcraft Gray Primer is a onecomponent, modified alkyd primer formulated for maximum rust protection. DESCRIPTION: A highly rust-resistant primer for ferrous metal. TT-P-636 Vulcraft Gray Primer is lead free and has an extremely high solids content. This primer offers excellent "wetting" of the substrate in addition to excellent abrasion and weather resistance. This primer is specially formulated to resist rust and corrosion. PROPERTIES: COLOR... Vulcraft Gray SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft/gal DRY FILM THICKNESS mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 Hour TO RECOAT... 4 Hours VEHICLE TYPE... Modified Alkyd WEIGHT/GAL lbs/gal FINISH... Low to Flat Sheen ADVANTAGES: (1). Excellent Corrosion Resistance (2). Excellent Foundation for Metal (3). Extremely Abrasion Resistant (4). High Solids, Low "VOC" Primer (5). Excellent Weather Resistance USES: (1). Steel (2). Machinery (3). Tanks (4). Grating (5). Equipment (6). Towers (7). Metal Surfaces

32 971 TT-P A33 VULCRAFT TYPE GRAY PRIMER PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs TT-P-636 Vulcraft Type Gray Primer is formulated for spray application. For spray application, thin up to 15% by volume with xylene. Brushing small areas is possible, thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection.

33 972 MOISTURE-CURE ZINC RICH PRIMER 200A35 PAGE 1 OF 2 200A35 Moisture-Cure Zinc Rich Primer PRODUCT: A two-component,high-solids, moisture-cured zinc rich primer. Protects steel galvanically, thus preventing below film corrosion. DESCRIPTION: A heavy duty maintenance primer formulated for excellent characteristics over a wide range of chemical and atmospheric conditions. Typical uses: Underground pipes, off shore drilling rigs (above splash zone), water lines, refineries, structural steel and severe corrosive and chemical environments. PROPERTIES: COLOR... Green Gray SOLIDS(Weight)... 85% SOLIDS(Volume)... 68% THEORETICAL COVERAGE* sq.ft.@ 1 FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F, 50-90% R.H. TO TOUCH... 1 Hour TO RECOAT... 4 Hours VEHICLE TYPE... Moisture Cure Polyurethane WEIGHT/GAL (Combined) lbs/gal Pigment Type... Zinc Dust Zinc Content, Dry Film % by weight Maximum Temp(Intermittent) F TOPCOATS: Epoxies, Acrylic, Chlorinated Rubber, Vinyls and many other maintenance coatings, consult your Griggs Paint Technical Rep. USES: (1). Underground Pipes (2). Off Shore Rigs (Above splash zones) (3). Water Lines (4). Severe Corrosive Environments (5). Refineries (6). Tank Exteriors (7). Structural Steel

34 973 MOISTURE-CURE ZINC RICH PRIMER 200A35 PAGE 2 OF 2 APPLICATION: Spray is the best method of application. Use air spray with agitated pressure pot or airless spray with continuous material mixing setup. Use brush for touch up only. Reduce with Moisture Cure Reducer, approximately 1 pint of thinner to 1 gallon of mixed primer. SURFACE PREPARATION: SSPC-SP6 Commercial Blast or SSPC-SP10 Near White Blast. If drying time prior to recoating exceeds 48 hours at temperatures above 70 Degrees F, the dry coating must be brush-sandblasted to achieve proper adhesion of new coat. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting (SSPC-SP6) and primed the same day. PRECAUTIONS: Contents are Flammable Store 78 F. out of direct sunlight. Keep away from heat and open flame. Shelf life 6-9 months from date of Mfg. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

35 974 INORGANIC ZINC RICH PRIMER 200A46 (MIL-P-38336) PAGE 1 OF 2 200A46 MIL-P Inorganic Zinc Rich Primer PRODUCT: A high-solids, inorganic zinc rich primer. Cured by solvent release and reaction with atmospheric moisture. Formulated to achieve maximum protection with a single coat. DESCRIPTION: A heavy duty maintenance primer formulated for excellent characteristics over a wide range of chemical and atmospheric conditions. Typical uses: Underground pipes, off shore drilling rigs (above splash zone), water lines, refineries, structural steel and severe corrosive and chemical environments. PROPERTIES: COLORS... Green Gray SOLIDS(Weight)... 75% SOLIDS(Volume)... 63% THEORETICAL COVERAGE* sq.ft.@ 1 FILM THICKNESS to 3.0 mils p/coat DRYING TIME-AT 75 DEGREES F, 50-90% R.H. TO TOUCH Minutes DRY HARD Hours VEHICLE TYPE... Inorganic Ethyl Silicate WEIGHT/GAL (Combined) lbs/gal Pigment Type... Zinc Dust Zinc Content, Dry Film % by weight Maximum Temp F Thinner... T0083 Zinc Rich Reducer Clean up... T0002 Gun Wash TOPCOATS: Epoxies, Acrylic, Chlorinated Rubber, Vinyls and many other maintenance coatings, consult your Griggs Paint Technical Rep. USES: (1). Underground Pipes (2). Off Shore Rigs (Above splash zones) (3). Water Lines (4). Severe Corrosive Environments (5). Refineries (6). Tank Exteriors (7). Structural Steel

36 975 INORGANIC ZINC RICH PRIMER 200A46 (MIL-P-38336) PAGE 2 OF 2 APPLICATION: Spray is the best method of application. Use air spray with agitated pressure pot or airless spray with continuous material mixing setup. Use brush for touch up only. Do not thin under normal conditions. In hot, windy conditions, if needed reduce up to 1/2 pint of T0083 Zinc Rich Reducer to one gallon of Inorganic Zinc Rich Primer. SURFACE PREPARATION: SSPC-SP6 Commercial Blast or SSPC-SP10 Near White Blast. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting (SSPC-SP6) and primed the same day. PRECAUTIONS: Contents are Flammable Store 78 F. out of direct sunlight. Keep away from heat and open flame. Shelf life 6-9 months from date of Mfg. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

37 976 ELECTROSTATIC #7 GRAY PRIMER 200A53 PAGE 1 OF 2 200A53 Electrostatic #7 Gray Primer PRODUCT: A lead-free, high-solids, electro-static alkyd primer for ferrous metal. Griggs Electro-Static #7 Primer is a single component, modified alkyd coating formulated for maximum rust prevention. DESCRIPTION: PROPERTIES: A highly rust-resistant primer for ferrous metal. Griggs Electro-Static #7 Primer is lead free and has an extremely high solids content. These primer offers excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. This product is formulated for application with electrostatic spray equipment to minimize overspray and waste. COLOR... Gray SOLIDS(Weight) % THEORETICAL COVERAGE mil sq.ft/gal DRY FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 To 2 Hours TO RECOAT To 12 Hours VEHICLE TYPE... Modified Alkyd VOLATILE ORGANIC COMPOUNDS(VOC) G/L WEIGHT/GAL lbs/gal TEMPERATURE RESISTANCE... Up to 300 degrees F ADVANTAGES: (1). Meets Steel Structures Painting Council (S.S.P.C.) requirements (2). ASTM B117 Salt Fog Test: 500+ Hours (3). ASTM D Conical Mandrel Passes: 1/8 in. mandrel (4). Excellent Corrosion Resistance (5). Excellent Foundation (6). Electro-Static Spray Application

38 977 ELECTROSTATIC #7 GRAY PRIMER 200A53 PAGE 2 OF 2 USES: (1). Steel (2). Machinery (3). Tanks (4). Railings (5). Equipment (6). Towers APPLICATION & REDUCTION: Griggs Electro-Static #7 Gray Primer is formulated specifically for electro-static spray application. Thin as needed with Xylene. Adjust charge with Di-Acetone Alcohol as required for proper charge per equipment manufacturer's recommendations. Brushing of small areas is possible. Thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

39 978 EPOXY ESTER PRIMER 200A55 PAGE 1 OF 2 200A55 Epoxy Ester Primer PRODUCT: A lead-free, high-solids, modified epoxy-ester primer for metal. Can be applied to ferrous and non-ferrous metals. Protects metal surface against rust and corrosion. DESCRIPTION: PROPERTIES: ADVANTAGES: A high-quality industrial grade epoxy ester primer formulated for maximum corrosion resistance. Adheres tightly to metals due to its rich formulation. Resistant to grease, lubricating oils, aliphatic hydrocarbon solvents, heat, weak acids and alkalis. Griggs Epoxy Ester Primer is recommended for many industrial environments. COLORS... Red,Gray,White SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft/gal DRY FILM THICKNESS mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 Hour TO RECOAT... 2 Hours VEHICLE TYPE... Modified Epoxy Ester WEIGHT/GAL lbs/gal FINISH... Low to Flat Sheen (1). Excellent Corrosion Resistance (2). Excellent Adhesion (3). Extremely Abrasion Resistant (4). Excellent Chemical Resistance (5). VOC Compliant USES: (1). Steel (2). Machinery (3). Tanks (4). Non-Ferrous Metals (5). Equipment (6). Towers (7). Metal Surfaces

40 979 EPOXY ESTER PRIMER 200A55 PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Epoxy Ester Primer is formulated for spray, brush or roll application. For spray application, thin up to 15% by volume with Xylene or Toluene. For brushing, thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. Two coats of Griggs Epoxy Ester Primer are recommended for use under waterborne coatings on ferrous metals. Consult your Griggs Technical Representative for non-ferrous metal preparation. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection.

41 980 MOISTURE-CURE ZINC RICH PRIMER 200A56 HI-SOLIDS PAGE 1 OF 2 200A56 Hi-Solids Moisture-Cure Zinc Rich Primer PRODUCT: A two component,high-solids, moisture-cured zinc rich primer. Protects steel galvanically, thus preventing below film corrosion. DESCRIPTION: A heavy duty maintenance primer formulated for excellent characteristics over a wide range of chemical and atmospheric conditions. Typical uses: Underground pipes, off shore drilling rigs (above splash zone), water lines, refineries, structural steel and severe corrosive and chemical environments. PROPERTIES: COLOR... Green Gray SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE* sq.ft.@ 1 FILM THICKNESS to 3.5 mils p/coat DRYING TIME-AT 75 DEGREES F, 50-90% R.H. TO TOUCH... 1 Hour TO RECOAT... 4 Hours VEHICLE TYPE... Moisture Cure Polyurethane WEIGHT/GAL (Combined) lbs/gal Pigment Type... Zinc Dust Zinc Content, Dry Film % by weight Maximum Temp(Intermittent) F TOPCOATS: Epoxies, Acrylic, Chlorinated Rubber, Vinyls and many other maintenance coatings, consult your Griggs Paint Technical Rep. USES: (1). Underground Pipes (2). Off Shore Rigs (Above splash zones) (3). Water Lines (4). Severe Corrosive Environments (5). Refineries (6). Tank Exteriors (7). Structural Steel

42 981 MOISTURE-CURE ZINC RICH PRIMER 200A56 HI-SOLIDS PAGE 2 OF 2 APPLICATION: Spray is the best method of application. Use air spray with agitated pressure pot or airless spray with continuous material mixing setup. Use brush for touch up only. Reduce with Moisture Cure Reducer, approximately 1 pint of thinner to 1 gallon of mixed primer. SURFACE PREPARATION: SSPC-SP6 Commercial Blast or SSPC-SP10 Near White Blast. If drying time prior to recoating exceeds 48 hours at temperatures above 70 Degrees F, the dry coating must be brush-sandblasted to achieve proper adhesion of new coat. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting (SSPC-SP6) and primed the same day. PRECAUTIONS: Contents are Flammable Store 78 F. out of direct sunlight. Keep away from heat and open flame. Shelf life 6-9 months from date of Mfg. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.

43 982 EXCLUSIVE GRAY QD PRIMER 200A62 PAGE 1 OF 2 200A62 Quick Dry Exclusive Gray Primer PRODUCT: A lead-free, high-solids, quick dry, alkyd primer for ferrous metals. Exclusive Gray Primer is a onecomponent, modified alkyd primer formulated for maximum exterior durability. DESCRIPTION: A highly weather-resistant primer for ferrous metal. Griggs Exclusive Gray Primer is lead free and has an extremely high solids content. This primer offers excellent "wetting" of the substrate in addition to excellent abrasion and weather resistance. Exclusive Gray Primer is specially formulated to resist damaging ultraviolet rays and severe weather conditions. PROPERTIES: COLOR... Exclusive Gray SOLIDS(Weight) % SOLIDS(Volume) % THEORETICAL COVERAGE sq.ft/gal DRY FILM THICKNESS mils p/coat DRYING TIME-AT 75 DEGREES F: TO HANDLE... 1 Hour TO RECOAT... 4 Hours VEHICLE TYPE... Modified Alkyd WEIGHT/GAL lbs/gal FINISH... Low to Flat Sheen ADVANTAGES: (1). Excellent Corrosion Resistance (2). Excellent Foundation for Wood & Metal (3). Extremely Abrasion Resistant (4). Excellent U.V. Resistance (5). Excellent Weather Resistance USES: (1). Steel (2). Machinery (3). Tanks (4). Wood (5). Equipment (6). Towers (7). Metal Surfaces

44 983 EXCLUSIVE GRAY QD PRIMER 200A62 PAGE 2 OF 2 APPLICATION & REDUCTION: Griggs Exclusive Gray Primer quick drying and is formulated for spray application. For spray application, thin up to 15% by volume with xylene or toluene. Brushing small areas is possible, thin with Synthetic Reducer as needed for improved flow. SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are FLAMMABLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read MSDS before use.

45 984 SSPC-20 TY.1C INORGANIC ZINC RICH PRIMER PAGE 1 OF 2 200A63 SSPC-20 Type IC, Inorganic Zinc Rich Primer PRODUCT: A high-solids, inorganic zinc rich primer. Cured by solvent release and reaction with atmospheric moisture. Formulated to achieve maximum galvanic protection with a single coat. DESCRIPTION: A heavy duty maintenance primer formulated for excellent characteristics over a wide range of chemical and atmospheric conditions. Typical uses: Underground pipes, off shore drilling rigs (above splash zone), water lines, refineries, structural steel and severe corrosive and chemical environments. PROPERTIES: COLOR... Gray SOLIDS(Weight) % FILM THICKNESS(Dry) Mils THEORETICAL COVERAGE mil DRYING TIME-AT 80 DEGREES F, 50% R.H. TO TOUCH Minutes DRY HARD Hours VEHICLE TYPE... Inorganic Ethyl Silicate WEIGHT/GAL (Combined) lbs/gal Pigment Type... Zinc Dust Zinc Content, Dry Film % By Weight Pot Life(75 Deg F)... 8 Hours Thinner... T0066 Zinc Rich Reducer TOPCOATS: Epoxies, Acrylic, Chlorinated Rubber, Vinyls and many other maintenance coatings, consult your Griggs Paint Technical Rep. USES: (1). Underground Pipes (2). Off Shore Rigs (Above splash zones) (3). Water Lines (4). Severe Corrosive Environments (5). Refineries (6). Tank Exteriors (7). Structural Steel

46 985 SSPC-20 TY.1C INORGANIC ZINC RICH PRIMER PAGE 2 OF 2 MIXING & APPLICATION: Power mix base then sift in zinc dust into the base very slowly while power mixing. Mix until smooth and free of lumps. Pour mixture through a 30 mesh screen to strain. Spray is the best method of application. Use air spray with agitated pressure pot or airless spray with continuous material mixing setup. Use brush for small area touch up only. Do not thin under normal conditions. In hot, windy conditions, if needed reduce up to 5 ounces of T0066 Zinc Rich Reducer to one gallon of SSPC-20 Ty.1C Inorganic Zinc Rich Primer. SURFACE PREPARATION: SSPC-SP6 Commercial Blast or SSPC-SP10 Near White Blast depending on service conditions. Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by a minimum commercial sandblasting (SSPC-SP6) and primed the same day. PRECAUTIONS: Contents are Flammable Store 78 F. out of direct sunlight. Keep away from heat and open flame. Shelf life 12 months from date of Mfg. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product. For Professional Use Only.

47 986 EPOXY ZINC RICH PRIMER 200A68 PAGE 1 OF 2 200A68 Epoxy Zinc Rich Primer PRODUCT: A high solids, epoxy ester, zinc rich primer. Can be used on structural steel and for the repair of galvanized surfaces. Formulated with a high content of zinc dust. DESCRIPTION: PROPERTIES: A heavy duty maintenance primer formulated for use in industrial and chemical environments. Can be topcoated with a variety of coatings. High zinc content provides galvanic cathodic protection of substrate. May also be used to touch up and repair inorganic zincs. COLORS... Gray SOLIDS(Volume) % Gloss... Flat THEORETICAL COVERAGE* mil sq.ft./gal DRY FILM THICKNESS to 5.0 mils p/coat DRYING TIME-AT 75 DEGREES F TO TOUCH... 1 Hour TO RECOAT... 4 Hours WEIGHT/GAL lbs/gal ZINC CONTENT, DRY FILM % by weight PIGMENT TYPE... Zinc Dust TEMPERATURE RESISTANCE(Dry) CONTINUOUS F INTERMITTENT F USES: (1). Pipes (2). Repair of Galvanized Steel (3). Superior Shop Primer (4). Aggressive Environments (5). Refineries (6). Structural Steel

PRODUCT GUIDE: ZINC-RICH COATINGS. Version:

PRODUCT GUIDE: ZINC-RICH COATINGS. Version: PRODUCT GUIDE: ZINC-RICH COATINGS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy,

More information

Carboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

Carboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Cycloaliphatic Amine Epoxy Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial

More information

Aliphatic Acrylic-Polyester Polyurethane

Aliphatic Acrylic-Polyester Polyurethane SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic-Polyester Polyurethane High build, low sheen finish that has excellent resistance

More information

1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats.

1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats. PAINTING GENERAL INFORMATION 1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats. DESIGN REQUIREMENTS 2.1 Material Compatibility: a. Provide materials

More information

Corlar 2.1 PR-P High Solids Productive Epoxy Primer

Corlar 2.1 PR-P High Solids Productive Epoxy Primer Corlar 2.1 PR-P High Solids Productive Epoxy Primer GENERAL DESCRIPTION A high solids, two component, VOC conforming (2.1 lbs./gal.) Low HAPS productive primer based on Axalta modified polyamide epoxy

More information

Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators

Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators GENERAL DESCRIPTION A high solids, two component, high build, VOC conforming (2.1 lbs./gal.) Low HAPS

More information

Refer to Substrates & Surface Preparation.

Refer to Substrates & Surface Preparation. SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic Polyurethane Thin film, high gloss finish with exceptional weathering performance

More information

Corlar LV PR 178 Series Epoxy Primer

Corlar LV PR 178 Series Epoxy Primer Corlar LV PR 178 Series Epoxy Primer GENERAL DESCRIPTION A two-component very low VOC corrosion-resistant epoxy primer designed to be extremely tough and durable. When properly activated, the combined

More information

Maximum Rust Protection!

Maximum Rust Protection! ZERO-RUST Zero Rust is a direct-to-metal, phenolic modified alkyd rust and corrosion control coating, which controls rust and corrosion by putting down an impermeable barrier at the steel level. Its dielectric

More information

Property Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)

Property Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) Approved 402;2522 1,2 2522 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust containing product. It conforms to

More information

Coating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment

Coating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment Coating Basics Why coatings are used Component of coatings Methods of protection Service environment Coating types Curing mechanism Design characteristics Limitations Suitable Use Coating Systems Coating

More information

SECTION 1045 PAINT FOR STRUCTURAL STEEL

SECTION 1045 PAINT FOR STRUCTURAL STEEL SECTION 1045 PAINT FOR STRUCTURAL STEEL 1045.1 Paint and Paint Material. 1045.1.1 General. All single component paints shall be ready-mixed at the factory to comply with the specification formula for the

More information

Corlar 2.8 HG High Solids Epoxy

Corlar 2.8 HG High Solids Epoxy Corlar 2.8 HG High Solids Epoxy GENERAL DESCRIPTION A high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based on Axalta modified polyamide epoxy technology. The resulting

More information

Product Information CHEMGLAZE B 9942 A/B. Coating for Casting Pits. Easy Application Chemglaze B 9942 A/B will bond to damp and wet surfaces.

Product Information CHEMGLAZE B 9942 A/B. Coating for Casting Pits. Easy Application Chemglaze B 9942 A/B will bond to damp and wet surfaces. Product Information Chemical Products Division CHEMGLAZE B 9942 A/B Coating for Casting Pits. FEATURES BENEFITS. Easy Application Chemglaze B 9942 A/B will bond to damp and wet surfaces. Will build to

More information

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (29 C) calculated VOC-US/Hong Kong

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (29 C) calculated VOC-US/Hong Kong Approved 20920;16620 1 20920 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product.

More information

Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 C.

Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 C. Approved 402;2521 1,2 2521 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms

More information

Property Test/Standard Description

Property Test/Standard Description Approved 29560;29561 1 29560 zinc silicate ^(ValidationDate) 1 Product description This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use

More information

Tested in accordance with ISO , high expected durability in corrosivity category C5-I. Property Test/Standard Description

Tested in accordance with ISO , high expected durability in corrosivity category C5-I. Property Test/Standard Description Approved 7461;7680 1,2 7680 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high solids, high zinc dust containing product. It

More information

two component high build amine adduct cured phenolic epoxy primer

two component high build amine adduct cured phenolic epoxy primer 5 pages Revision of January 2003 DESCRIPTION two component high build amine adduct cured phenolic epoxy primer PRINCIPAL CHARACTERISTICS primer coat in the Sigma Phenguard tank coating system excellent

More information

RUST TRAP TM TECHNICAL DATA SHEET

RUST TRAP TM TECHNICAL DATA SHEET RUST TRAP TM TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rust Trap is a moisture cross- linked urethane for coating ferrous metals. Rust Trap also adheres to aluminum, fiberglass and properly prepped

More information

Rust Bullet Home and Farm FAQ s

Rust Bullet Home and Farm FAQ s Rust Bullet Home and Farm FAQ s 1. Will Rust Bullet Protect My Galvanized Metal Roof? Yes. Rust Bullet is the ideal coating for protecting sheet metal buildings and roofs; it not only provides protection

More information

Associated Spec Consultants, Inc. February 27, 2014 SECTION ARCHITECTURAL COATINGS

Associated Spec Consultants, Inc. February 27, 2014 SECTION ARCHITECTURAL COATINGS SECTION 099650 ARCHITECTURAL COATINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat

Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat GENERAL DESCRIPTION A flat gloss, isocyanate-free, single component, 1.8 lbs/gal VOC conforming, zero HAPs coating based on unique Axalta waterborne

More information

1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.

1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2. DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer. PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat

More information

ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION

ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions,

More information

Technical Data Sheet

Technical Data Sheet MATTE CONTRACTOR CHOICE PAINT The Matte Contractor Choice C paint is designed for the contractor; it has good performance and opacity. No odor. Has very good brushability, leveling, durability, adhesion

More information

1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)

1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F) DESCRIPTION One component heat resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat resistant

More information

Date of issue: 5 October 2017 Page: 1/6

Date of issue: 5 October 2017 Page: 1/6 Approved 16560;16561;16840 1,2 16560 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high

More information

Normadur 65 HS. Technical Data PROPERTIES AND RECOMMENDED USAGE TECHNICAL DATA

Normadur 65 HS. Technical Data PROPERTIES AND RECOMMENDED USAGE TECHNICAL DATA Technical Data Normadur 65 HS PROPERTIES AND RECOMMENDED USAGE Paint type: NORMADUR 65 HS is a fast drying, flexible polyurethane coating with an aliphatic isocyanate curing agent. NORMADUR 65 HS is high-solid

More information

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 28780 1,2 28780 acrylic ^(ValidationDate) 2 Product description This is a one component water borne acrylic emulsion coating. It is a versatile, fast drying product for exterior and interior use.

More information

Priming and Painting Slip Critical Steel Connections. Troy Fraebel Corrosion Specification Specialist

Priming and Painting Slip Critical Steel Connections. Troy Fraebel Corrosion Specification Specialist Priming and Painting Slip Critical Steel Connections 10 May 2012 Troy Fraebel Corrosion Specification Specialist 25 years in industrial coatings SSPC Protective Coatings Specialist SSPC C-1 and C-2 Instructor

More information

Cleaning and Protecting Concrete Surface Preparation, Application, and Inspection. NESMEA October 17, 2017 Kenneth A. Trimber KTA-Tator, Inc.

Cleaning and Protecting Concrete Surface Preparation, Application, and Inspection. NESMEA October 17, 2017 Kenneth A. Trimber KTA-Tator, Inc. Cleaning and Protecting Concrete Surface Preparation, Application, and Inspection NESMEA October 17, 2017 Kenneth A. Trimber KTA-Tator, Inc. Cleaning and Protecting Concrete Surface Preparation, Application,

More information

RUST TRAP TECHNICAL DATA SHEET

RUST TRAP TECHNICAL DATA SHEET RUST TRAP TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rust Trap is a high gloss, moisture cured, urethane coating for restoring and protecting rusty metal. FEATURES Premium moisture-cured urethane

More information

A. Section includes surface preparation and the application of high-performance coating systems on the following substrates:

A. Section includes surface preparation and the application of high-performance coating systems on the following substrates: ILLINOIS STATE UNIVERSITY CORDOGAN, CLARK & ASSOCIATES, INC. WATTERSON DINING EXPANSION PROJECT 960 RIDGEWAY AVENUE NORMAL, ILLINOIS AURORA, ILLINOIS CCA PROJECT NUMBER: 14362 630-896-4678 BID SET JULY

More information

CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL

CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL SUDAS Standard Specifications Division 9 - Site Work and Landscaping Section 9080 - Concrete Steps, Handrails, and Safety Rail CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART - GENERAL.0 SECTION INCLUDES

More information

A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet

A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet PRODUCT DESCRIPTION: A-4300 Clear Silicone Aliphatic Polyurea is a two component 100% solids, no VOC s, silicone aliphatic polyurea that was

More information

Signature Seal 100 Medium-to-High Sheen Sealer VOC Characteristics and Applications

Signature Seal 100 Medium-to-High Sheen Sealer VOC Characteristics and Applications Signature Seal 100 Medium-to-High Sheen Sealer - 100 VOC DESCRIPTION Legacy Signature Seal is a high-gloss, UV-resistant, lacquer-based, crystal-clear sealer. A light coating of Legacy Signature Seal will

More information

MAKE ROOFS LAST LONGER

MAKE ROOFS LAST LONGER MAKE ROOFS LAST LONGER Roof Coatings & Roof Repair Single-Ply Metal Asphalt HIGHEST PERFORMING SYSTEMS. LOWEST APPLIED COST. METAL ROOF RESTORATION Metal Restoration Quick Guide Acrylic Polyurethane High

More information

B. Paints, Sealants, Adhesives

B. Paints, Sealants, Adhesives VERSATEX Paint Specification The Sherwin-Williams Company has completed adhesion testing and accelerated weather testing on VERSATEX Trimboard and makes the following coating recommendations; Surface Preparation

More information

DULUX INTERIOR LUXURIOUS SILK TECHNICAL DATA SHEET Version SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS

DULUX INTERIOR LUXURIOUS SILK TECHNICAL DATA SHEET Version SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS TECHNICAL DATA SHEET Version 1 2016 SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A low odour premium quality interior mid sheen finish with supreme stain resistance. PRODUCT

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 2080;2081 1 2080 epoxy VValidationDate). 1 Product description This is a two component polyamide cured epoxy coating. It is a high solids, high build product. Designed as a mid coat in systems for new

More information

Using SSPC Coating Material Standards

Using SSPC Coating Material Standards SSPC: The Society for Protective Coatings Using SSPC Coating Material Standards Coating Selection SSPC coating material standards contain requirements for the performance of various types of coatings when

More information

SAMPLE SPECIFICATION

SAMPLE SPECIFICATION SAMPLE SPECIFICATION Section 02760 Paving Specialties STREETCOAT Epoxy Modified Traffic Coating System IDEAL FOR VEHICULAR TRAFFIC, BIKE LANES AND COATING STAMPED ASPHALT SURFACES 1.0 GENERAL 1.1 Summary

More information

Corrosion Protection for Fisher Valves

Corrosion Protection for Fisher Valves Corrosion Protection Product Bulletin Corrosion Protection for Fisher Valves Control valves operate in some of the most severely corrosive conditions imaginable. Valves used near or on the sea are constantly

More information

Corrosion, Coatings and Hydropower

Corrosion, Coatings and Hydropower Corrosion, Coatings and Hydropower Steve Reiber, Ph.D. sreiber@hdrinc.com The Pat Tillman Bridge: Under Construction 2009 Completed 2011 Acknowledgements Materials kindly supplied by: Society for Protective

More information

METAL & MACHINERY PAINT POLYURETHANE FLOOR PAINT SKIP & CONTAINER PAINT

METAL & MACHINERY PAINT POLYURETHANE FLOOR PAINT SKIP & CONTAINER PAINT Master Paints WE VE GOT IT COVERED Master Paints WE VE GOT IT COVERED MASTERBUILD PRODUCTS LTD MOORSIDE MILL, CHURCH STREET, AINSWORTH, BURY BL2 5RD TEL: +44 (0)161 763 8600 FAX: +44 (0)161 763 8606 www.masterbuildproducts.co.uk

More information

GRIP-GARD PLUS BRUSH / ROLL ADDITIVE

GRIP-GARD PLUS BRUSH / ROLL ADDITIVE Description The GRIP-GARD PLUS Brushing/Rolling Additive is designed to convert GRIP-GARD PLUS spray paint into a coating that can be used for brush & roll application. 100 Grip Gard Plus (High Gloss)

More information

Property Test/Standard Description

Property Test/Standard Description Approved 612;617 1,2 617 epoxy ^(ValidationDate) 1 Product description This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a primer for new construction. Can be used

More information

PRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM // St. Louis, Missouri

PRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM // St. Louis, Missouri PRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM 314.205.1500 // St. Louis, Missouri 2 ABOUT U.S. COATINGS We offer a range of solutions designed to fit the needs of our

More information

INDUSTRIAL PAINTING SCHEDULE GUIDE

INDUSTRIAL PAINTING SCHEDULE GUIDE Copyright 2014, The Sherwin-Williams Company ISSUED May 2014 09 96 00- INTERIOR HIGH PERFORMANCE COATINGS INDUSTRIAL COATINGS THE SHERWIN-WILLIAMS COMPANY INDUSTRIAL PAINTING SCHEDULE GUIDE This Painting

More information

Property Test/Standard Description

Property Test/Standard Description Approved 1537 1,2 1537 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. It is a fast drying, high build, zinc phosphate pigmented product. Can be

More information

Section COATING RESTORATION

Section COATING RESTORATION Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80658R StoColor Texture - Coarse Textured Acrylic-Based,

More information

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring advanced moisture control, inc. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring 250 polished concrete slabs! Made in Southern California,

More information

Pacific Polymers Elasto-Deck BT Guide Specification

Pacific Polymers Elasto-Deck BT Guide Specification 1 07141-1 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141 FLUID APPLIED WATERPROOFING 2 07141-2 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141

More information

TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets

TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com TOPCOAT Restoration Specifications

More information

SIGMACAP MASTIC GF. September surface tolerant coating for lower grade of steel preparation

SIGMACAP MASTIC GF. September surface tolerant coating for lower grade of steel preparation 5 pages DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading rate Touch dry after Overcoating

More information

General Applications Before applying, mix the pre-measured catalyst* into Liquid Roof by following label directions.

General Applications Before applying, mix the pre-measured catalyst* into Liquid Roof by following label directions. General Applications Before applying, mix the pre-measured catalyst* into Liquid Roof by following label directions. Surface Preparation: Surface to be coated should be clean, dry and structurally sound.

More information

- Aromatic hydrocarbons - Binder 2,67 kg/dm³ (±0,06 Kg/dm³) Solid content - 80% by weight (±2%) - 58% by volume (±2%) according to ASTM D2697

- Aromatic hydrocarbons - Binder 2,67 kg/dm³ (±0,06 Kg/dm³) Solid content - 80% by weight (±2%) - 58% by volume (±2%) according to ASTM D2697 p. 1/6 ZINGA The Film Galvanising System ZINGA is a one pack coating that contains 96% zinc in the dry film and provides cathodic protection of ferrous metals. It can be used as a unique system as an alternative

More information

SUPERIOR PRODUCTS INTERNATIONAL LEAD-BASED PAINT ABATEMENT ENCAPSULATION METHOD THAT ELIMINATES SANDBLASTING FOR STEEL STRUCTURES

SUPERIOR PRODUCTS INTERNATIONAL LEAD-BASED PAINT ABATEMENT ENCAPSULATION METHOD THAT ELIMINATES SANDBLASTING FOR STEEL STRUCTURES SUPERIOR PRODUCTS INTERNATIONAL INTRODUCES A LEAD-BASED PAINT ABATEMENT ENCAPSULATION METHOD THAT ELIMINATES SANDBLASTING FOR STEEL STRUCTURES Superior Products RUST GRIP and ENAMO GRIP Before 1 LEAD-BASED

More information

SP-100 Equipment Wash SP-110 Tool Cleaner SP-120 Internal Storage Lubricant

SP-100 Equipment Wash SP-110 Tool Cleaner SP-120 Internal Storage Lubricant DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.

More information

Avoiding Fading Paint

Avoiding Fading Paint 45 Clues to a Coating Failure Avoiding Fading Paint Uneven paint at a retail store offers lessons for specifying high-performance paint. Top-coated with a shop-applied high-solids flouropolymer paint selected

More information

Industrial Sealers & Coatings

Industrial Sealers & Coatings Industrial Sealers & Coatings 100% Made in America www.foundationarmor.com (866) 306-0246 Foundation Armor is a family-owned and operated manufacturer of sealers, coatings and repair products. We serve

More information

Architectural Coatings & Finishes (ACF) Acrylic Finishes Elastomeric Finishes Acrylic Coatings Elastomeric Coatings ACF Assemblies

Architectural Coatings & Finishes (ACF) Acrylic Finishes Elastomeric Finishes Acrylic Coatings Elastomeric Coatings ACF Assemblies Architectural Coatings & Finishes (ACF) Acrylic Finishes Elastomeric Finishes Acrylic Coatings Elastomeric Coatings ACF Assemblies Why Parex ACF? Finishes and coatings contribute color, texture and an

More information

***********************************************************************************

*********************************************************************************** AQUAFIN-2K/M Two-Component Cement-based Acrylic-based Waterproofing GUIDE AQUAFIN, Inc. SPECIFICATION PART 1 - GENERAL 1.1 SECTION INCLUDES SECTION 07 16 14 ACRYLIC MODIFIED (FLEXIBLE) CEMENTITIOUS WATERPROOFING

More information

Sample Specification

Sample Specification Sample Specification Section 02760 Paving Specialties StencilCoat Commercial Asphalt and Concrete Surfacing System 1.0 GENERAL 1.1 Summary The StencilCoat Commercial Asphalt Surfacing System is a 100%

More information

PNWS-AWWA 2008 ANNUAL CONFERENCE INTRODUCTION TO THE PROPER SELECTION

PNWS-AWWA 2008 ANNUAL CONFERENCE INTRODUCTION TO THE PROPER SELECTION PNWS-AWWA 2008 ANNUAL CONFERENCE INTRODUCTION TO THE PROPER SELECTION AND APPLICATION OF PROTECTIVE COATINGS Stan Osborne Sr. Industrial Coatings Specialist ICI Devoe Coatings PNWS-AWWA 2008 ANNUAL CONFERENCE

More information

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss <4% <70% IR4

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss <4% <70% IR4 Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor S is a suitable screed that can be applied on cement-based floors which need high mechanical

More information

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4 Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor P is a suitable screed that can be applied on cement-based floors which need high mechanical

More information

Interior Painting Artesi II & III Day Care Facilities at 777 & 333 W. Matthews Road

Interior Painting Artesi II & III Day Care Facilities at 777 & 333 W. Matthews Road Interior Painting Artesi II & III Day Care Facilities at 777 & 333 W. Matthews Road Introduction: The HACSJ is seeking quotes from licensed and bonded C-33 Interior/Exterior Painting Contractors to provide

More information

Frank D. Rea Director of Coatings Services / Chief Chemist

Frank D. Rea Director of Coatings Services / Chief Chemist State of the Union Cleaning and Painting Steel Bridges Frank D. Rea Director of Coatings Services / Chief Chemist CURRENT PRACTICES AND MATERIALS LESSONS LEARNED THE LATEST CURRENT PRACTICES AND MATERIALS

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 32 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 32 C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 30060;30061 1,2 30060 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very good

More information

Industrial Coatings. Protect your application by choosing the proper coating.

Industrial Coatings. Protect your application by choosing the proper coating. Industrial Coatings Protect your application by choosing the proper coating. Industrial Coatings: Overview Industrial Coatings are here to protect your applications and choosing the proper coating can

More information

Save up to $50 per job!

Save up to $50 per job! ADHESION PROMOTER Save up to $50 per job! Comparison tests show that using Bulldog Adhesion Promoter saves both labor and material cost. Bulldog (1 coat) Bulldog (2 coats) Competitor A Competitor B Total

More information

Property Test/Standard Description

Property Test/Standard Description Approved 720 1,2 720 silicone acrylic ^(ValidationDate) 1 Product description This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 C. Can be used as primer,

More information

4970 PRIME COAT FZ Two components zinc phosphate epoxy product

4970 PRIME COAT FZ Two components zinc phosphate epoxy product Converter name Destination Extremely versatile use: industrial vehicles, agricultural machines, different metal surfaces, (trussing, external pipes). Contains zinc phosphate as anticorrosive pigment. Doesn

More information

Installation Instructions

Installation Instructions Installation Instructions I. GENERAL INFORMATION KEY CHIP-100 FLOORING is a decorative resin flooring system consisting of clear, 100% solids epoxy resin and colored vinyl chips. KEY CHIP-100 FLOORING

More information

Ggreenhouse gas free PRIMERS. Fast Dry Primer. Weld-Thru Primer. Industrial Primer

Ggreenhouse gas free PRIMERS. Fast Dry Primer. Weld-Thru Primer. Industrial Primer PRIMERS Primers are the critical first step to successful protection. They provide sealing of the substrate, a base for topcoat adhesion and bonding. Primers enhance the durability, finished appearance,

More information

TOPCOAT Restoration Specifications Structural Concrete

TOPCOAT Restoration Specifications Structural Concrete TOPCOAT Restoration Specifications Structural Concrete Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com TOPCOAT Restoration Specifications Structural Concrete

More information

FORREST POWDER COATINGS Product Guide

FORREST POWDER COATINGS Product Guide FORREST POWDER COATINGS Product Guide CONTENTS HIGH PERFORMANCE FINISHES Custom Formulations Color matching and specialty formulations Special Special effects including Bonded Metallic and Transparent

More information

F.S.P.M.A. PAINT SPECIFICATION DIVISION 9 FINISHES SECTION INTERIOR MP-47.2 MOLD AND MILDEW PROOF ACRYLIC PAINT

F.S.P.M.A. PAINT SPECIFICATION DIVISION 9 FINISHES SECTION INTERIOR MP-47.2 MOLD AND MILDEW PROOF ACRYLIC PAINT I. SCOPE, USE AND CLASSIFICATION F.S.P.M.A. PAINT SPECIFICATION DIVISION 9 FINISHES SECTION 09920 INTERIOR FOR GENERAL EDUCATION FACILITIES USE MP-47.2 MOLD AND MILDEW PROOF ACRYLIC PAINT A. SCOPE: This

More information

TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING

TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING SECTION 09960 - TEXTURED COATINGS Coating System Submittals Guide Specification TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING (SPLIT FACE OR SAND FINISH BLOCK) 1. TEX COTE 600, Textured Coating

More information

STERI-COAT P. Multi Functional, Pigmented High Build Epoxy Novolac Coating, For Wall & Ceiling Applications mils GREEN BUILDING FEATURES

STERI-COAT P. Multi Functional, Pigmented High Build Epoxy Novolac Coating, For Wall & Ceiling Applications mils GREEN BUILDING FEATURES GREEN BUILDING FEATURES * Steri-Coat P contributes toward satisfying credit MR 5 and EQ 4.2 under LEED. Low emitting material Low installation odor Processed and manufactured in Ohio APPLICATION FEATURES

More information

10P20-14 High Solids Low IR Primer

10P20-14 High Solids Low IR Primer Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.

More information

CC-1004 Ultra High Temperature Epoxy Adhesive

CC-1004 Ultra High Temperature Epoxy Adhesive CC-1004 Ultra High Temperature Epoxy Adhesive PRODUCT DESCRIPTION TYPICAL USES Blome CC-1004 is a two part, high temperature, epoxy adhesive used for the installation of abrasion resistant brick and tile

More information

Instruction Guide APPLICATION OF CIM TO CONCRETE

Instruction Guide APPLICATION OF CIM TO CONCRETE 23 Elm St., Peterborough, NH 03458 Tel: (800) 543-3458 (603) 924-9481 Fax: (603) 924-9482 Web site: Instruction Guide APPLICATION OF CIM TO CONCRETE 1.0 DESCRIPTION This guide covers the installation of

More information

Property Test/Standard Description

Property Test/Standard Description Approved 16480;18120 1,2 16480 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. This product contains no solvents on

More information

ARDEX GUIDE SPECIFICATION ARDEX CD Concrete Dressing and ARDEX CD FINE Concrete Dressing Polymer-Modified, Portland Cement-Based, Resurfacing Compound

ARDEX GUIDE SPECIFICATION ARDEX CD Concrete Dressing and ARDEX CD FINE Concrete Dressing Polymer-Modified, Portland Cement-Based, Resurfacing Compound ARDEX GUIDE SPECIFICATION ARDEX CD Concrete Dressing and ARDEX CD FINE Concrete Dressing Polymer-Modified, Portland Cement-Based, Resurfacing Compound SECTION 03 01 30 MAINTENANCE OF CAST-IN-PLACE CONCRETE

More information

HYDRAULIC GATE SEALS. Industrial Rubber Supply (1995) Ltd.

HYDRAULIC GATE SEALS. Industrial Rubber Supply (1995) Ltd. Industrial Rubber Supply (1995) Ltd. Manufacturers of Quality Industrial Products 55 Dunlop Avenue, Winnipeg, Manitoba, Canada R2X 2V2 Phone (204) 694-4444 - Fax (204) 632-6767 - www.indrub.com ISO 9001:2000

More information

Property Test/Standard Description. Flash point ISO 3679 Method C

Property Test/Standard Description. Flash point ISO 3679 Method C Other Technical Data Sheet 2906;2907 6 2906 VValidationDate). 1 Product description This is a two component finishing filler. It is a smooth multi purpose product. It has good sanding properties, strong

More information

Product Information. DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating

Product Information. DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating Product Information DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating Description Crommelin DiamondCoat Polyurethane Concrete

More information

Technical Data Jotamastic 80 MIO

Technical Data Jotamastic 80 MIO Technical Data Jotamastic 80 MIO Product description Jotamastic 80 MIO is a high solids two-pack micaceous iron oxide pigmented, surface-tolerant epoxy mastic coating which can be applied in low film thickness.

More information

SUPERIOR PRODUCTS INTERNATIONAL II, INC.

SUPERIOR PRODUCTS INTERNATIONAL II, INC. SUPERIOR PRODUCTS INTERNATIONAL II, INC. RUST GRIP Patent #5,695,812 Method for Abating Bio-Hazardous Materials Found in Coating Such as Lead Based Paint RUST GRIP was developed in the field to stand up

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell WB 50 Product Specification GUIDE SPECIFICATION SECTION 09725

More information

HVAC Antimicrobial Protected Coatings

HVAC Antimicrobial Protected Coatings HVAC Antimicrobial Protected Coatings Introduction to Shop Applied Coating Technology HVAC Heating, Ventilation, and Air Conditioning Then & Now Although HVAC technology is one of the most practical advantages

More information

Specification and Installation

Specification and Installation SHAW 5800 SPECIFICATION ADHESIVE FOR SHAW CARPET TILE Any variance from these procedures will become the responsibility of the installer and not the manufacturer. See Shaw s Modular Installation Guidelines

More information

Heresite VR-514 TECHNICAL DATA SHEET. VR-514 Typical Properties. Our 50 years of coating history speaks for itself.

Heresite VR-514 TECHNICAL DATA SHEET. VR-514 Typical Properties. Our 50 years of coating history speaks for itself. Heresite VR-514 Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became

More information

Specifier Notes: Edit the following list as required by the project. List other sections with work directly related to the floor coating.

Specifier Notes: Edit the following list as required by the project. List other sections with work directly related to the floor coating. This resinous flooring specification consists of a flexible hybrid polymer primer and basecoat, urethane concrete slurry resurfacer, and double broadcast decorative vinyl flake system based on aliphatic

More information

POLYMER CONCRETE 100 EPOXY POLYMER CONCRETE DILUTE ACIDS RESISTANCE

POLYMER CONCRETE 100 EPOXY POLYMER CONCRETE DILUTE ACIDS RESISTANCE RECOMMENDED APPLICATIONS Polymer Concrete 100 is a three-component, epoxy polymer concrete used for the construction of chemical resistant floors, pads, curbing, trenches and sumps. Polymer Concrete 100

More information

Property Test/Standard Description

Property Test/Standard Description Approved 1505;1506 1,2 1505 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is heat resistant up to 205 C (401

More information

PRODUCT DATA SHEET Sika Unitherm Platinum

PRODUCT DATA SHEET Sika Unitherm Platinum PRODUCT DATA SHEET Solvent free, ultra high build, two pack, modified epoxy resin based, intumescent fire protection coating for internally or externally exposed structural steel. Ideal for in-shop application.

More information