Potassium hydroxide number (KOH No.) - the content of acid radicals neutralised by KOH

Size: px
Start display at page:

Download "Potassium hydroxide number (KOH No.) - the content of acid radicals neutralised by KOH"

Transcription

1 LIST OF NAME OF SPECIFIC TEST AND TEST METHOD -MATERIALS CHARACTERIZATION UNIT (MCU)- Field Latex Dry rubber content (DRC) - the acid precipitate of Total solids content (TSC) - the non-volatile solids of Alkalinity - total alkalis of (NH 3 ) Volatile fatty acid number (VFA No.) - KOH equivalent required to neutralise the VFA in Latex concentrate Dry rubber content (DRC) - the acid precipitate of Total solids content (TSC) - the non-volatile solids of Alkalinity - total alkalis of (NH 3 ) Mechanical stability time (MST) - time required to initiate visible flocculation on ph value of Potassium hydroxide number (KOH No.) - the content of acid radicals neutralised by KOH UPB/L/001 MS 466:1987 Section 4 UPB/L/002 MS 466:1987 Section 3 UPB/L/003 MS 466:1987 Section 5 UPB/L/006 MS 466:1987 Section 6 UPB/L/001 ISO 126:1995 (E) MS 281:1998 Part 2 ASTM D :Section 9 UPB/L/002 ISO 124:1992(E) MS 281:1998 Part 3 ASTM D :Section 8 UPB/L/003 ISO.125:1995 (E) MS 281:1998 Part 4 ASTM D :Section 10 UPB/L/005 ISO 35:1995(E) MS 281:1998 Part 5 ASTM D :Section 16 UPB/L/013 ISO 976:1996(E) MS 281:1999 Part 16 ASTM D :Section 15 UPB/L/004 ISO 127:1995(E) MS 281:1999 Part 11 ASTM D :Section 14

2 Latex Concentrate Volatile fatty acid number (VFA No.) - KOH equivalent required to neutralise the VFA in Boric acid - content of boric acid in Coagulum content - content of coagulum in Sludge content of Viscosity of UPB/L/006 ISO 506:1992(E) MS 281:1999 Part 10 ASTM D :Section UPB/L/008 ISO 1802:1985(E) MS 281:1992 Part 12 ASTM D :Section 36 UPB/L/007 ISO 706:1985(E) MS 281:1998 Part 6 ASTM D :Section 13 UPB/L/009 ISO 2005:1992(E) MS 281:1975 Part 9 ASTM D :Section 12 RRIM In House Method (Ref. No. UPB/L/015) Rubber - Raw Determination of Metallic Elements by AAS (Ca, Mg, Mn, Fe, Cu and Zn) Thermogravimetric Analysis of Rubbers Identification of Polymer Type by FTIR Spectroscopy Extractable Proteins Glass Transition Temperature via DSC Proton NMR Spectrometry ( 1 H NMR) to identify NR and ENR. Determination of epoxide UPB/P/001 UPB/P/010 UPB/P/011 based on ISO 4650 RRIM Modified Lowry ASTM 5712 ( 1995 ) ASTM 5712 ( 1999 ) EN 455 : 3 ( 2000 ) UPB/P/009 UPB/P/019 UPB/P/022

3 level of ENR by 1 H NMR Quantitative Measurement of length via SEM in the range of 100X to 10000X magnification Determination of Solvent Extract Determination of Residual Powder on Medical Gloves Standard Test Method for assignment of the glass transition temperature by differential scanning calorimetry or differential thermal analysis. UPB/P/021 ISO 1407:1992 Method B ASTM ( Parts I and II) ASTM E Rubber- Raw Quantification of volatile N- nitrosamines and nitrosatable amines which can be extracted by artificial saliva (AS). Quantification of volatile N- nitrosamines which can be extracted by dichloromethane (DCM). Identification of accelerators and antioxidants in cured and uncured rubber compounds by thin layer chromatography. chemicals, which can be, rubber by hot water. chemicals, which can be, rubber by neutral, acidic and alkaline buffer solution. UPB/P/013 following BGA method UPB/P/014 following FDA method UPB/P/002 UPB/P/003a UPB/P/003b

4 Rubber - Raw chemicals which can be rubber by neutral, acidic and alkaline buffer solutions following part of EN 455-3:2000 method. Determination of chemical purity of Tetramethylthiuram disulfide (TMTD) and Zinc Diethyl Dithiocarbamate (ZDEC). Determination of chemical purity of Glyphosate. enthalpies of fusion and crystallization by Differential Scanning Calorimetry transition temperatures of polymers by Differential Scanning Calorimetry melting and crystallization temperatures by thermal analysis UPB/P/003c UPB/P/003d UPB/P/003e ASTM E ASTM D ASTM E Fertilisers Determination of nitrogen content by auto analyser Determination of moisture content. Determination of Phosphorus content by auto analyser UPB/F/001 UPB/F/002 UPB/F/003 Determination of Potassium and Magnesium by Atomic Absorption Spectrophotometer. UPB/F/004 Plant Plant Determination of K, Ca, Mg, Mn, Cu, Fe & Zn by UPB/T/001

5 Atomic Absorption Spectrometry Plant Determination of P, K, Ca, Mg, Mn, Cu, Fe & Zn using the ICP-OES Plant Determination of nitrogen using the Auto- Analyzer Plant Determination of nitrogen using the Elemental Analyzer UPB/T/002 UPB/T/003 UPB/T/004 Raw, Dry Natural Rubber Chemical Test Mechanical Test Dirt Ash Nitrogen Volatile Matter Acetone Extract Rapid Plasticity and Plasticity Retention Index Mooney Viscosity Colour (Lovibond) Wallace Accelerated Storage-Hardening Test Mooney Accelerated Storage-Hardening Test Rheometric Cure(Oscillating Disc) SMR Bulletin No.7,B4,1992 SMR Bulletin No.7,B6,1992 SMR Bulletin No.7,B7,1992 SMR Bulletin No.7,B5,1992 SMR Bulletin No.7,D3,1992 SMR Bulletin No.7,B8,1992 SMR Bulletin No.7,B9,1992 SMR Bulletin No.7,B10,1992 SMR Bulletin No.7,C1,1992 SMR Bulletin No.7,C2,1992 SMR Bulletin No.7,C3,1992

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NSL Analytical Services, Inc. 4450 Cranwood

More information

The Effects Different Size of Batu Reput as a Filler in SMR L and ENR- 50 Blends

The Effects Different Size of Batu Reput as a Filler in SMR L and ENR- 50 Blends The Effects Different Size of Batu Reput as a Filler in and ENR- 50 Blends J. N. M. Ridhwan 1, N. Z. Noriman 1, a, M. A. A. Mohd Salleh 1, and S. Ragunathan 2 and N. Z. Nik Yahya 1 1 School of Materials

More information

Proposal by Russia to delete hot sub-spot Hot sub-spot name South-West Wastewater Treatment Plant

Proposal by Russia to delete hot sub-spot Hot sub-spot name South-West Wastewater Treatment Plant Proposal by Russia to delete hot sub-spot 18.4 LAND 14/2009, Document 6/3/Rev.1 ATTACHMENT 1. Hot sub-spot name South-West Wastewater Treatment Plant 2. Location Block 2, 123, Volkhonskoye shosse, St.

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 R. J. REYNOLDS TOBACCO COMPANY 1 Product Services Analytical Testing Laboratories 950 Reynolds Blvd. Winston Salem, NC 27105 Jannell Rowe Phone: 336 741 4121

More information

THE MANUFACTURE OF CONSTANT VISCOSITY NATURAL RUBBER FROM CLONES PRODUCING HIGH VISCOSITY RUBBERS

THE MANUFACTURE OF CONSTANT VISCOSITY NATURAL RUBBER FROM CLONES PRODUCING HIGH VISCOSITY RUBBERS J I. Rubb. Res. Inst. Sri Lanka (1981) 59, 7^-12 7 THE MANUFACTURE OF CONSTANT VISCOSITY NATURAL RUBBER FROM CLONES PRODUCING HIGH VISCOSITY RUBBERS By L. M. K. TlLLAKERATNE, P. A. D. T. VlMALASIRI AND

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk

More information

Preparation and Characterization of rosin-based polymeric monomer

Preparation and Characterization of rosin-based polymeric monomer Preparation and Characterization of rosin-based polymeric monomer Jifu Wang, Chunpeng Wang, Chuanbing Tang, Fuxiang Chu * 王基夫, 王春鹏,Chuanbing Tang, 储富祥 * Institute of Chemical Industry of Forest Products

More information

National Food Safety Standard

National Food Safety Standard National standard of People s Republic of China GB 5413.21 2010 National Food Safety Standard Determination of calcium, iron, zinc, sodium, potassium, magnesium, copper and manganese in foods for infants

More information

The Application of ATD and DSC Methods to Study of the EN AC Alloy Phase Transformations

The Application of ATD and DSC Methods to Study of the EN AC Alloy Phase Transformations A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 17 Issue 2/2017 207 211 36/2

More information

SCHOTT pharma services

SCHOTT pharma services SCHOTT pharma services SCHOTT is an international technology group with more than 125 years of experience in the areas of specialty glasses and materials and advanced technologies. With our high-quality

More information

SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009

SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 SCP SCIENCE 21800 Clark Graham Baie d'urfe, Quebec H9X 4B6 CANADA David Smith Phone: 514 457 0701 dsmith@scpscience.com REFERENCE MATERIAL PRODUCER Valid To:

More information

Supporting Information

Supporting Information Supporting Information Wiley-VCH 2008 69451 Weinheim, Germany Supplementary Online Data Reversible Redox Reactions in an Extended Polyoxometalate Framework Solid Chris Ritchie 1, Carsten Streb 1, Johannes

More information

CSIR-National Chemical Laboratory. Analytical/Testing Charges. Table of contents

CSIR-National Chemical Laboratory. Analytical/Testing Charges. Table of contents CSIR-National Chemical Laboratory Analytical/Testing Charges Table of contents Serial no. Page no. 01 Biochemical Characterization 02 02 Elemental Analysis 02 03 ESCA Analysis 02 04 Magnetic measurements

More information

Technical Magnesia Mineral compounds for technical applications

Technical Magnesia Mineral compounds for technical applications Technical Magnesia Mineral compounds for technical applications Expect more Your mineral compound specialists Hamburg Harbour Headquarters Lüneburg Distribution Centre Lüneburg Distribution Centre Kehl

More information

Chapter: The d and f Block Elements

Chapter: The d and f Block Elements Chapter: The d and f Block Elements Introduction to d block elements Question 1 In Tc ( Z = 43) and Tb( Z = 65) which one is inner transition metal and which one is transition metal and why? The outer

More information

The Perception of Metallic Stearates as Acid Acceptors

The Perception of Metallic Stearates as Acid Acceptors The Perception of Metallic Stearates as Acid Acceptors Joseph R. Webster Stabilization Technologies LLC Charlotte, North Carolina * Copyright Presentation* Metallic Stearates Past and Present The use of

More information

PHARMACEUTICAL TESTING

PHARMACEUTICAL TESTING WHITEHOUSE, NJ PHARMACEUTICAL TESTING Pharmaceutical Expertise for GMP & CMC Testing Our Pharmaceutical Expertise With more than 20 years of experience in a variety of industries, our Whitehouse, New Jersey

More information

Coathylene Polymer Powders

Coathylene Polymer Powders Enhanced processing efficiency of Glass fiber reinforced plastics Improved dimensional stability Improved surface finish and appearance Anti-Shrink additive for low profile Coathylene fine powders are

More information

REPORT NUMBER REPORT DATE SEND TO ISSUE DATE Apr 18, Apr 18, 2017 RECEIVED DATE Apr 05, 2017

REPORT NUMBER REPORT DATE SEND TO ISSUE DATE Apr 18, Apr 18, 2017 RECEIVED DATE Apr 05, 2017 PAGE 1/7 Sample ID: EWA PELLETS Lab Number: 2653281 Date Sampled: 2017-04-04 0850 Carbon nitrogen ratio C/N 6 : 1 0.1 Calculation Auto-2017/04/12 Auto-2017/04/18 Carbon (total) 38.53 % 0.050 ASTM D 5373

More information

NATURAL POLYMER AS WATERPROOFING COMPOUND IN CEMENT CONCRETE

NATURAL POLYMER AS WATERPROOFING COMPOUND IN CEMENT CONCRETE NATURAL POLYMER AS WATERPROOFING COMPOUND IN CEMENT CONCRETE Remya V 1 and Hima Elizabeth Koshy 2 1,2 Assistant Professor, Department Of Civil Engineering, Mount Zion College of Engineering, Pathanamthitta

More information

Epoxy Adhesive 2648 EG

Epoxy Adhesive 2648 EG 3 Epoxy Adhesive Technical Data March, 2003 Product Description 3M is a two-part, premixed and frozen epoxy adhesive for encapsulating and protecting semi-conductor devices. This product is formulated

More information

ISO INTERNATIONAL STANDARD. Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC

ISO INTERNATIONAL STANDARD. Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC INTERNATIONAL STANDARD ISO 28343 First edition 2010-09-01 Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC Ingrédients de mélange du caoutchouc Huiles de

More information

METALS AND THEIR COMPOUNDS

METALS AND THEIR COMPOUNDS METALS AND THEIR COMPOUNDS Metals are elements whose atoms ionize by electron loss, while non-metals are elements whose atoms ionize by electron gain. Metals are in groups 1, 2 and 3 of the periodic table.

More information

The Use of Fly Ash Fillers in Rubber

The Use of Fly Ash Fillers in Rubber The Use of Fly Ash Fillers in Rubber Richard A. Kruger 1, Mark Hovy 1 and David Wardle 2 1 Sphere-Fill, PO Box 317, Randburg 2125, South Africa 2 Polymer Mixing Services, PO Box 2344, Innesdale, 31, South

More information

Lab #2 Wafer Cleaning (RCA cleaning)

Lab #2 Wafer Cleaning (RCA cleaning) Lab #2 Wafer Cleaning (RCA cleaning) RCA Cleaning System Used: Wet Bench 1, Bay1, Nanofabrication Center Chemicals Used: H 2 O : NH 4 OH : H 2 O 2 (5 : 1 : 1) H 2 O : HF (10 : 1) H 2 O : HCl : H 2 O 2

More information

06. Electroplating Industry

06. Electroplating Industry PRTR Estimation Manual 06. Electroplating Industry January 2001 Revised: March 2002 Federation of Electro Plating Industry Association, Japan Contents 1. Class I Designated Chemical Substances (Referred

More information

Iron filings (Fe) 56g IRON + SULPHUR IRON SULPHIDE

Iron filings (Fe) 56g IRON + SULPHUR IRON SULPHIDE W.S.51. Chemical reactions. All of the different materials around us have been formed by chemical reactions from about one hundred simple elements. The diagram below shows a chemical reaction between the

More information

Thin-Layer Chromatography of Aluminium: Quantitative Densitometric Determination of Fe 2+, Ni 2+, Cu 2+, and Si 4+

Thin-Layer Chromatography of Aluminium: Quantitative Densitometric Determination of Fe 2+, Ni 2+, Cu 2+, and Si 4+ Thin-Layer Chromatography of Aluminium: Quantitative Densitometric Determination of Fe 2+, Ni 2+, Cu 2+, and Si 4+ P.A. Mohamed Najar*, R.N. Chouhan, J.U. Jeurkar, S.D. Dolas, and K.V. Ramana Rao Jawaharlal

More information

Utilization of Alumina Waste and Silica Waste for Geopolymer Production

Utilization of Alumina Waste and Silica Waste for Geopolymer Production Article Utilization of Alumina Waste and Silica Waste for Geopolymer Production Petchporn Chawakitchareon *, and Plengprapkun Kingthong Department of Environmental Engineering, Faculty of Engineering,

More information

Issue February 2017 Valid to December ISO 9001 Registered Quality Management

Issue February 2017 Valid to December ISO 9001 Registered Quality Management Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43

More information

PHYSICAL, MECHANICAL, AND DURABILITY CHARACTERIZATION OF CARBON FRP CABLE

PHYSICAL, MECHANICAL, AND DURABILITY CHARACTERIZATION OF CARBON FRP CABLE PHYSICAL, MECHANICAL, AND DURABILITY CHARACTERIZATION OF CARBON FRP CABLE Ahmed H. Ali 1, Hamdy M. Mohamed 2, Patrice Cousin 3, Adel ElSafty 4, and Brahim Benmokrane 5 1 Doctoral candidate, University

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11357-3 Second edition 2011-05-01 Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization Plastiques

More information

ISO INTERNATIONAL STANDARD. Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper

ISO INTERNATIONAL STANDARD. Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper INTERNATIONAL STANDARD ISO 17812 First edition 2007-12-01 Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper Papier, carton et pâtes Détermination

More information

DSC differential scanning calorimeter (DSC)

DSC differential scanning calorimeter (DSC) THERMAL ANALYZERS DSC- 2200 differential scanning calorimeter (DSC) Product introduction: DSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK B229 Contact: Ms Jill French Analytical Services Tel: +44 (0)19467 87408 Sellafield Fax: +44 (0)19467 75154 Cumbria E-Mail: jill.x.french@sellafieldsites.com

More information

12. Global Requirements for Medical Applications of Chitin and its Derivatives

12. Global Requirements for Medical Applications of Chitin and its Derivatives 12. Global Requirements for Medical Applications of Chitin and its Derivatives Marcin H. Struszczyk TRICOMED SA ul. Piotrkowska 270, 90-361 Łódź, Poland e-mail: nauka@tricomed.com 1. Introduction Chitin

More information

Collected Applications Thermal Analysis ELASTOMERS. Volume C

Collected Applications Thermal Analysis ELASTOMERS. Volume C Collected Applications Thermal Analysis ELASTOMERS Volume 1 200 400 600 C Collected Applications Thermal Analysis ELASTOMERS Volume 1 Jürgen E.K. Schawe This application booklet presents selected application

More information

Araldite LY 5085 Hardener HY 1019 RF

Araldite LY 5085 Hardener HY 1019 RF Ciba Specialty Chemicals Performance Polymers Structural Composites MATRIX SYSTEMS FOR RECREATIONAL COMPOSITES DATA SHEET Applications Properties Processing Araldite LY 5085 Hardener HY 1019 RF Araldite

More information

EFFECT OF VOLUME FRACTION EPOXY-HOLLOW GLASS MICROSPHERES AND CURING TEMPERATURE VARIATION ON COMPRESSIVE PROPERTIES OF COMPOSITES

EFFECT OF VOLUME FRACTION EPOXY-HOLLOW GLASS MICROSPHERES AND CURING TEMPERATURE VARIATION ON COMPRESSIVE PROPERTIES OF COMPOSITES EFFECT OF VOLUME FRACTION EPOXY-HOLLOW GLASS MICROSPHERES AND CURING TEMPERATURE VARIATION ON COMPRESSIVE PROPERTIES OF COMPOSITES Sutikno, Wajan Berata, Wahyu Wijanarko and Indra Sidharta Mechanical Engineering

More information

The Agilent Atomic Spectroscopy portfolio for Environmental applications AA, MP-AES, ICP-OES, ICP-MS & ICP-QQQ

The Agilent Atomic Spectroscopy portfolio for Environmental applications AA, MP-AES, ICP-OES, ICP-MS & ICP-QQQ The Agilent Atomic Spectroscopy portfolio for Environmental applications AA, MP-AES, ICP-OES, ICP-MS & ICP-QQQ 1 History of Technology Leadership in Atomic Spectroscopy 62 AAS instruments manufactured

More information

SEMATECH Provisional Test Method for Evaluating Bulk Polymer Samples of UPW Distribution System Components (DSC and TGA Methods)

SEMATECH Provisional Test Method for Evaluating Bulk Polymer Samples of UPW Distribution System Components (DSC and TGA Methods) Provisional Test Method for Evaluating Bulk Polymer Samples of UPW Distribution System Components (DSC and TGA Methods) Technology Transfer 92010939B-STD and the logo are registered service marks of, Inc.

More information

Features Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity

Features Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity Properties and Part Selection Overview Selection Table - Epoxy-Based Adhesive Properties Features Conductive Room Temperature Cure Product Ref 120 132 4461IP 42IP 438 700 Properties High electrical conductivity

More information

Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry 1

Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry 1 Designation: D 418 99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry 1 This standard is issued under the fixed designation D 418; the number immediately

More information

Series FBE-4 Type Phenolic Epoxy Powders Fusion Bonded Epoxy. General Description: Powder Feature: Particle Size Distribution (% undersize):

Series FBE-4 Type Phenolic Epoxy Powders Fusion Bonded Epoxy. General Description: Powder Feature: Particle Size Distribution (% undersize): General Description: FBE- Type Phenolic Epoxy FBE- pure primer epoxy powders are based on epoxy (Novolac) and phenolic resins. FBE- pure epoxy powder creates a coating with outstanding adhesion to metal,

More information

Which of these is the formula for disulfur heptoxide? A. S 2 O 7 B. S 7 O 2 C. SO 2 D. N 2 O

Which of these is the formula for disulfur heptoxide? A. S 2 O 7 B. S 7 O 2 C. SO 2 D. N 2 O Which of these is the formula for disulfur heptoxide? A. S 2 O 7 B. S 7 O 2 C. SO 2 D. N 2 O Which of these is the correct chemical formula for a molecule of oxygen? A. O B. O -2 C. O +2 D. O 2 Which of

More information

Tecnoflon. Tecnoflon FKM/FFKM. fluoroelastomers & perfluoroelastomers. Material Guide

Tecnoflon. Tecnoflon FKM/FFKM. fluoroelastomers & perfluoroelastomers. Material Guide Tecnoflon Tecnoflon FKM/FFKM fluoroelastomers & perfluoroelastomers Material Guide Tecnoflon FKM/FFKM Compound Recipes Bisphenolic Compound code 1BN 2BN 3BN 1BY 2BY Polymer 100 100 100 100 100 Tecnoflon

More information

Differential Scanning Calorimetry DSC 200 F3

Differential Scanning Calorimetry DSC 200 F3 Differential Scanning Calorimetry DSC 200 F3 DSC 200 F3 Maia - Principle of operation Differential Scanning Calorimetry Differential Scanning Calorimetry (DSC) is one of the most frequently used techniques

More information

Introduction to TG/DTA/DSC. Thermal Processing Technology Center Illinois Institute of Technology

Introduction to TG/DTA/DSC. Thermal Processing Technology Center Illinois Institute of Technology Introduction to TG/DTA/DSC Thermal Processing Technology Center Illinois Institute of Technology Outline Introduction Theory of TG/DTA/DSC Application of TG/DTA/DSC TG/DTA/DSC in Metallurgy application

More information

THERMAL ENERGY STORAGE SYSTEMS STEARIC / LAURIC ACID MIXTURES AS PHASE CHANGE MATERIALS

THERMAL ENERGY STORAGE SYSTEMS STEARIC / LAURIC ACID MIXTURES AS PHASE CHANGE MATERIALS 3.014 MATERIALS LABORATORY MODULE- β1 September 26 30, 2005 GEETHA P. BERERA THERMAL ENERGY STORAGE SYSTEMS STEARIC / LAURIC ACID MIXTURES AS PHASE CHANGE MATERIALS OBJECTIVES: Prepare stearic acid and

More information

» Talc is a native, hydrous magnesium silicate, sometimes containing a small proportion of aluminum silicate.

» Talc is a native, hydrous magnesium silicate, sometimes containing a small proportion of aluminum silicate. Change to read: Talc» Talc is a native, hydrous magnesium silicate, sometimes containing a small proportion of aluminum silicate. Packaging and storage Preserve in well closed containers. Identification

More information

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005

More information

METALS

METALS METALS 3 Gallium is a metallic element in Group III. It has similar properties to aluminium. (a) (i) Describe the structure and bonding in a metallic element. You should include a labelled diagram in your

More information

A vapor (or gas) needs a completely enclosed container to have a definite volume; it will readily take on any shape imposed.

A vapor (or gas) needs a completely enclosed container to have a definite volume; it will readily take on any shape imposed. Overview: Amorphous and crystalline solid states. States of matter. General description. A vapor (or gas) needs a completely enclosed container to have a definite volume; it will readily take on any shape

More information

Utilisation Options for Waste Toner Powder

Utilisation Options for Waste Toner Powder Utilisation Options for Waste Toner Powder Dilyana Yordanova, Svetla Angelova, Ivan Dombalov Department of Environmental Engineering University of Chemical Technology and Metallurgy Sofia, Bulgaria dilyana.yordanova@outlook.com

More information

LABORATORY TURNAROUND TIMES AND CHARGES

LABORATORY TURNAROUND TIMES AND CHARGES LABORATORY TURNAROUND TIMES AND CHARGES The enclosed prices reflect a 5 business day turnaround time. There will be a $25.00 minimum charge per report. Same Day Rush 24 Hour Rush 48 Hour Rush 72 Hour Rush

More information

Corrosion and Odor Control in Wastewater Systems

Corrosion and Odor Control in Wastewater Systems Corrosion and Odor Control in Wastewater Systems Topics to be covered Hydrogen Sulfide Formation and Consequences What has changed since the Clean Water Act Corrosion in Wastewater systems Liquid Phase

More information

Dr.M.Swaroopa Rani Associate Professor, Civil Engineering Depatrment JNTUK, Kakinada Andhra Pradesh, India

Dr.M.Swaroopa Rani Associate Professor, Civil Engineering Depatrment JNTUK, Kakinada Andhra Pradesh, India A Study on Compressive Strength of Normal Curing Concrete and Self Curing Concrete by Partial Replacement of Fine Aggregate with Crushed Spent Fire Brick Dr.M.Swaroopa Rani Associate Professor, Civil Engineering

More information

Limestone Neutralisation of Arsenic-rich Effluent from a Gold Mine

Limestone Neutralisation of Arsenic-rich Effluent from a Gold Mine Technical Article Limestone Neutralisation of Arsenic-rich Effluent from a Gold Mine M de Beer 1, 2, D Krueger 2, J Maree 1, N Mbhele 1, M Phalanndwa 1, O Novhe 1 1 CSIR, Natural Resources and the Environment,

More information

"Pulp and Paper Testing" Edited by Jan-Erik Levlin And Liva Sōderhjeln

Pulp and Paper Testing Edited by Jan-Erik Levlin And Liva Sōderhjeln Item Number: 0202FIN17 ISBN: 952-5216-17-9 287 pages Contents include: Single fibers and pulp testing Paper testing Uncertainty of testing Standardization Chapter 1 - Aim of pulp and paper testing 1 Why

More information

DETERMINATION OF ELEMENTS IN DRINKING WATER AS PER BUREAU OF INDIAN STANDARDS 10500, & USING THE AGILENT 5100 ICP-OES

DETERMINATION OF ELEMENTS IN DRINKING WATER AS PER BUREAU OF INDIAN STANDARDS 10500, & USING THE AGILENT 5100 ICP-OES ENVIRONMENTAL ANALYSIS DETERMINATION OF ELEMENTS IN DRINKING WATER AS PER BUREAU OF INDIAN STANDARDS 10500, 14543 & 13428 USING THE AGILENT 5100 ICP-OES Solutions for Your Analytical Business Markets and

More information

AGAROSE GEL ELECTROPHORESIS. Assiut University

AGAROSE GEL ELECTROPHORESIS. Assiut University AGAROSE GEL ELECTROPHORESIS By Prof. Dr. Asmaa Hussein Prof. of Zoonoses & Director of the MBRU Assiut University The standard method used to separate, identify electrophoresis and purify DNA fragments

More information

New high performance and sustainable UV stabilizer solutions for waterborne coatings

New high performance and sustainable UV stabilizer solutions for waterborne coatings ew high performance and sustainable UV stabilizer solutions for waterborne coatings ABRAFATI 2013 SA PAUL, BRAZIL Public Jean-Yves Desrats BU Additives - Business Line Polymer Additives Technical Marketing

More information

DELIVERY REQUIREMENTS FOR RAW MATERIALS FOR RUBBER BONDING APPLICATION

DELIVERY REQUIREMENTS FOR RAW MATERIALS FOR RUBBER BONDING APPLICATION 3 14.09.16 AE MD Vogeler 4 5 6 2 03.05.16 AE MD all Revision Rev. Date Approval: Department/Name Producer / Department Approver Management AE/ MD Page 5.2 Regrind ratio 10 % deleted, 5.3 solvent based

More information

The image part with relationship ID rid4 was not found in the file. Welcome

The image part with relationship ID rid4 was not found in the file. Welcome The image part with relationship ID rid4 was not found in the file. Welcome Trace Metals Analysis: Impurity Determinations By Thomas Kozikowski Chemist, R&D at Inorganic Ventures Key Considerations What

More information

Metal-Organic Frameworks for Thin-Layer Chromatographic Applications

Metal-Organic Frameworks for Thin-Layer Chromatographic Applications Supporting Information for: Metal-Organic Frameworks for Thin-Layer Chromatographic Applications Claudia Schenk, Christel Kutzscher, Franziska Drache, Stella Helten, Irena Senkovska and Stefan Kaskel*

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROBAC LABORATORIES, INC., KTL DIVISION 3323 Gilmore Industrial Blvd. Louisville, KY 40213 Megan Rothgerber Phone: 502 962 6400 CHEMICAL Valid To: December

More information

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has

More information

TopClear Systems TopClear / Gelcoat / Finish Coat

TopClear Systems TopClear / Gelcoat / Finish Coat Page 1 / 6 TopClear Systems TopClear / Gelcoat / Finish Coat The TopClear Systems is a shiny, translucent or colored, resistant to UV, and a high build (100% solid) product. Brushable or sprayable Multiple

More information

SDWA TABLE OF SAMPLE PRESERVATION AND HOLDING TIME REQUIREMENTS ORGANIC ANALYSIS Table 6-1

SDWA TABLE OF SAMPLE PRESERVATION AND HOLDING TIME REQUIREMENTS ORGANIC ANALYSIS Table 6-1 SDWA TABLE OF SAMPLE PRESERVATION AND HOLDING TIME REQUIREMENTS Table 6-1 *504.1 EDB/DBCP Na 2 S 2 O 3 3mg/40ml Extract and analyze within 505 Organohalide Pesticides and PCB s Na 2 S 2 O 3 3mg/40ml Extract

More information

Chapter 1.6. Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table. Diameter 100 mm 4-inch 150 mm 6-inch

Chapter 1.6. Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table. Diameter 100 mm 4-inch 150 mm 6-inch Chapter 1.6 I - Substrate Specifications Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table Diameter 100 mm 4-inch 150 mm 6-inch Thickness 525 µm 20.5 mils 675

More information

TITLE: Surface Decontamination of Zinc Compounds (Elemental Zinc Powder (Zn), Zinc Oxide (ZnO), and Zinc Acetate (Zn(O 2 CCH 3 ) 2 ) by DeconGel TM

TITLE: Surface Decontamination of Zinc Compounds (Elemental Zinc Powder (Zn), Zinc Oxide (ZnO), and Zinc Acetate (Zn(O 2 CCH 3 ) 2 ) by DeconGel TM TITLE: Surface Decontamination of Zinc Compounds (Elemental Zinc Powder (Zn), Zinc Oxide (ZnO), and Zinc Acetate (Zn(O 2 CCH 3 ) 2 ) by DeconGel TM ABSTRACT Surface decontamination efficacy determination

More information

Thermal, tensile and rheological properties of high density polyethylene (HDPE) processed and irradiated by gamma-ray in different atmospheres

Thermal, tensile and rheological properties of high density polyethylene (HDPE) processed and irradiated by gamma-ray in different atmospheres Thermal, tensile and rheological properties of high density polyethylene (HDPE) processed and irradiated by gamma-ray in different atmospheres H. F. R. Ferreto, A. C. F. Oliveira, R. Gaia, D. F. Parra,

More information

High-Purity Acids & Reagents

High-Purity Acids & Reagents J.T.Baker Brand High-Purity Acids & Reagents Purity and consistency are essential for all reagent chemicals, particularly acids. Whether used for tracemetal analysis or for general use, aligning the correct

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11357-6 Second edition 2008-06-15 Corrected version 2008-11-15 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal

More information

metallic stearates (metal salts/soaps)

metallic stearates (metal salts/soaps) metaic stearates (metal salts/soaps) Metaic stearates have been utilized in the rubber industry a long time. The primary functions of metaic stearates are their ability to prevent rubber from sticking

More information

Kraft Micaceous Iron Oxide SG (according to IOS 10601)

Kraft Micaceous Iron Oxide SG (according to IOS 10601) Kraft Micaceous Iron Oxide SG (according to IOS 10601) Product: natural, lamellar micaceous iron oxide (alpha-fe 2 O 3 ) Colour: grey with metallic sheen Grade (ISO 10601): 1 Type (ISO 10601): 2 Iron content

More information

Cold-curing epoxy system based on Araldite LY 564 / Hardener HY 560

Cold-curing epoxy system based on Araldite LY 564 / Hardener HY 560 Ciba Specialty Chemicals Performance Polymers Structural Composites MATRIX SYSTEMS FOR AEROSPACE COMPOSITES MATRIX SYSTEMS FOR INDUSTRIAL COMPOSITES DATA SHEET Cold-curing epoxy system based on Araldite

More information

Polyvidone Polyvinylpyrrolidone H 2 C H C N

Polyvidone Polyvinylpyrrolidone H 2 C H C N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 (C 6 H 9 NO)n [9003-39-8] Poly [(2-oxo-1-pyrrolidinyl) ethylene] Povidone (Rev. 1, Stage 4)

More information

RESOPAL -Decorative High Pressure Laminates HPL according to EN 438

RESOPAL -Decorative High Pressure Laminates HPL according to EN 438 Product Data Sheet RESOPAL -Decorative High Pressure Laminates HPL according to EN 438 This information describes the composition of RESOPAL -HPL and gives advice for their handling, processing, use, and

More information

85 Q.51 Which of the following carbonates would give the metal when heated with carbon? (1) MgCO 3 (2) PbCO 3 (3) K 2 CO 3 (4) CuCO 3

85 Q.51 Which of the following carbonates would give the metal when heated with carbon? (1) MgCO 3 (2) PbCO 3 (3) K 2 CO 3 (4) CuCO 3 Metal and metal reactivity / Section 2 / Sect2pp.doc / S. W. Tse / P.1 85 Q.51 Which of the following carbonates would give the metal when heated with carbon? (1) MgCO 3 (2) PbCO 3 (3) K 2 CO 3 (4) CuCO

More information

3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009

3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009 3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety

More information

Fly Ash, Slag, Silica Fume, and Natural Pozzolans

Fly Ash, Slag, Silica Fume, and Natural Pozzolans Silica Fume, and Fly Ash, Slag, Silica Fume, and Also known as Supplementary Cementing Materials (SCMs) a material that, when used in conjunction with portland cement, contributes to the properties of

More information

Product Data Sheet Edition 25/01/2006. Sikasil WS-305. Product Description. Uses. Characteristics / Advantages

Product Data Sheet Edition 25/01/2006. Sikasil WS-305. Product Description. Uses. Characteristics / Advantages Product Data Sheet Edition 25/01/2006 Identification no: 02 05 01 14 001 0 000003 Sikasil WS-305 Sikasil WS-305 1-Part Silicone Weatherseal for Structural Glazing Product Description Uses Sikasil WS-305

More information

Laboratory Fee Schedule

Laboratory Fee Schedule JMLord, Inc. Laboratory Fee Schedule Spring 2011 www.jmlordinc.com 267 N. Fulton St. Fresno CA, 93705 (559) 268-9755 (559) 486-6504 (FAX) Laboratory Services Since 1976, JMLord, Inc. has provided consultants

More information

Investigation of alumino-silicic reagent interaction with iron in water by Mössbauer spectroscopy

Investigation of alumino-silicic reagent interaction with iron in water by Mössbauer spectroscopy Journal of Physics: Conference Series PAPER OPEN ACCESS Investigation of alumino-silicic reagent interaction with iron in water by Mössbauer spectroscopy Related content - Catalytic Properties of Zeolites

More information

Corrosion Under Insulation (CUI) and the Insulation System. By Soeren Nyborg Rasmussen ROCKWOOL Technical Insulation, Jubail, 10 December 2015

Corrosion Under Insulation (CUI) and the Insulation System. By Soeren Nyborg Rasmussen ROCKWOOL Technical Insulation, Jubail, 10 December 2015 Corrosion Under Insulation (CUI) and the Insulation System By Soeren Nyborg Rasmussen ROCKWOOL Technical Insulation, Jubail, 10 December 2015 The issue Corrosion of steel occurs in the presence of water

More information

Differential Scanning Calorimetry DSC 404 F1

Differential Scanning Calorimetry DSC 404 F1 Differential Scanning Calorimetry DSC 404 F1 DSC 404 F1 Pegasus - Introduction to the Method leading manufacturer of highperformance thermal analysis systems flexible, sophisticated and tomers wishes and

More information

Properties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity??

Properties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity?? CLASS: X NCERT (CBSE) SCIENCE: Chemistry Page: 1 Question 1: Compare the properties of a typical metal and a non-metal on the basis of the following. Fill in Column A, B. Properties A Metal B Non- metal

More information

Cold Spray Coatings of Al Alloys for Corrosion Resistance

Cold Spray Coatings of Al Alloys for Corrosion Resistance 1 Cold Spray Coatings of Al Alloys for Corrosion Resistance Benjamin Hauch Benjamin Maier, DJ Devan, Kumar Sridharan*, Todd Allen University of Wisconsin - Madison *Contact: kumar@engr.wisc.edu 1 Presentation

More information

(a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface

(a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface 1 The reactivity series lists metals in order of reactivity. (a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface tin(ii)

More information

CONTROL OF PHASE TRANSFORMATION DURING HEAT TREATMENTS BASED ON DSC EXPERIMENTS

CONTROL OF PHASE TRANSFORMATION DURING HEAT TREATMENTS BASED ON DSC EXPERIMENTS Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 Edited by: Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair,

More information

The empirical formula of a compound

The empirical formula of a compound The empirical formula of a compound Reference: Chapter 1, Section 1.2, pages 21 24 Please note Aim A full risk assessment should be carried out prior to commencing this experiment. Personal safety equipment

More information

2015 O LEVEL CHEMISTRY 5073/02

2015 O LEVEL CHEMISTRY 5073/02 OF SCIENCE 2015 O LEVEL CHEMISTRY 5073/02 SECTION A 1. The table shows some common oxidation states for some elements in their compounds. element common oxidation states metal / non-metal A 2 non-metal

More information

Analysis of Die Casting Tool Material

Analysis of Die Casting Tool Material Paper received: 15.01.2008 UDC 669.018.253 Paper accepted: 12.03.2010 Analysis of Die Casting Tool Material Mitja Muhič 1,* - Janez Tušek 2 - Franc Kosel 2 - Damjan Klobčar 2 1 TKC Technology Consulting

More information

* Current monograph name valid until May 1, 2017 ** New monograph name valid as of May 1, 2012, mandatory as of May 1, 2017

* Current monograph name valid until May 1, 2017 ** New monograph name valid as of May 1, 2012, mandatory as of May 1, 2017 Technical Information EUDRAGIT L 30 D-55 Specification and Test Methods Ph. Eur. Methacrylic Acid - Ethyl Acrylate Copolymer (1:1) Dispersion 30 Per Cent USP/NF Methacrylic Acid Copolymer Dispersion -

More information

Accredited Laboratory

Accredited Laboratory Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance

More information

Slide 1. Slide 2. Slide 3. Hardness. Concentration is. What s the concentration of red triangles? What s in your pipes? 500 ml

Slide 1. Slide 2. Slide 3. Hardness. Concentration is. What s the concentration of red triangles? What s in your pipes? 500 ml Slide 1 Hardness What s in your pipes? Slide 2 What s the concentration of red triangles? 500 ml 1 g 1 g 1 g A. 10 B. 10 C. D. 1 g 1 g It s all of the above! Slide 3 Concentration is any statement of the

More information

ADVANCED AP PLACEMENT CHEMISTRY. Activity Series. Introduction. Objective. Chemicals and Equipment

ADVANCED AP PLACEMENT CHEMISTRY. Activity Series. Introduction. Objective. Chemicals and Equipment ADVANCED AP PLACEMENT CHEMISTRY Introduction Activity Series An activity series of metals is a table of metals arranged in the order of their decreasing chemical activity or the ease at which the metal

More information

Spectro-photometric determinations of Mn, Fe and Cu in aluminum master alloys

Spectro-photometric determinations of Mn, Fe and Cu in aluminum master alloys IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Spectro-photometric determinations of Mn, Fe and Cu in aluminum master alloys To cite this article: Rehan, A. Naveed et al 2016

More information

ICP-OES. Varian Vista-MPX CCD Simultaneous ICP-OES

ICP-OES. Varian Vista-MPX CCD Simultaneous ICP-OES ICP-OES Varian Vista-MPX CCD Simultaneous ICP-OES Varian Vista-MPX ICP-OES Delivering the productivity of simultaneous ICP-OES at an affordable price Varian, Inc. is a recognized world leader and innovator

More information