The Convenience Stores For Metal
|
|
- Dwain Allen
- 6 years ago
- Views:
Transcription
1 STEEL Data and Specifications 303 Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the chromium-nickel grades. Non-magnetic in the annealed condition. Applications: Aircraft parts and parts requiring machining, grinding or polishing with good corrosion resistance. Excellent for moving parts and where low magnetic permeability is required. Analysis: 303S 303Se C.15 Max..15 Max. Mn 2.00 Max Max. P.15 Max..17 Max. S.15 Max..04 Max. Se /.40 Si 1.00 Max Max. Cr 17.00/ /19.00 Ni 8.00/ /10.00 Cu.75 Max..75 Max. Mo.75 Max..75 Max. Mechanical Properties: (following values are average and are representative) (1/2 and under) Tensile Strength (psi) 100,000 Brinell Hardness 228 Surface Cutting Speed: 130 ft/min. Weldability: Fair. Hardening: Not hardenable by heat treatment. Cold working increases tensile strength and hardness. Corrosion Resistance: Maximum corrosion resistance in the annealed condition. Free machining elements reduce overall corrosion resistance. Resistance to Scaling: Excellent up to 1600º F in continuous service. In design, beware of high coefficient of expansion. 304 Excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical. Applications: Dairy, beverage and food product handling/processing equipment. Used for handling acetic, nitric, and citric acids; organic and inorganic chemicals, dye stuff, crude and refined oils; instruments; hospital equipment; applications requiring welding. Analysis: C -.08 Max. Mn Max. P -.04 Max. S -.03 Max. Si Max. Cr /20.00 Ni /10.50 Cu -.75 Max. Mo -.75 Max metalsupermarkets.com 113
2 STEEL Data and Specifications 304 (cont d) Mechanical Properties: (following values are average and are representative) Tensile Strength (psi) 90,000 Yield Point (psi) 40,000 Elongation (% in 2 ) 50 Brinell Hardness 163 Weldability: Excellent. Surface Cutting Speed: 75 ft/min. Corrosion Resistance: Maximum resistance in annealed condition shows good resistance to strong oxidizing acids such as nitric acid, and resists attack by a wide variety of organic and inorganic chemicals. Intergranular corrosion may occur if heated within or cooled through the range of 800º F º F. Resistance to Scaling: Excellent at temperatures up to 1600º F in continuous service. In design, beware of high coefficient of expansion. 304L As per above except: 304L is an extra-low-carbon analysis, the advantage of which is that it precludes any harmful precipitation in the 800º F º F range, such as might otherwise occur in welding heavier sections. 309 This alloy is known for good strength and oxidation resistance in continuous service temperatures up to 2000º F (1093º C). It is superior to 304 stainless in both strength and corrosion resistance. Applications: Oven linings, boiler baffles, fire box sheets, furnace components and other high temperature containers. Analysis: C -.2 Max. Cr /24.00 Fe - Balance Mn Max. Ni /15.00 P Max. S -.03 Max. Si 1.0 Max. Mechanical Properties: (following values are average and are representative) Tensile Strength (psi) Yield Point (psi) Elongation (% in 2 ) Brinell Hardness Machinability: This alloy machines similarly to type 304 stainless. Its chips are stringy and it will work-harden rapidly. It is necessary to keep the tool cutting at all times and use chip breakers. Weldability: Most of the austenitic stainless steels can be readily welded using fusion or resistance methods. Oxyacetylene welding is not recommended. Hot Working: Working temperatures are 2150º F (1177º C), with reheating necessary at 1800º F (982º C). Rapid quenching is recommended. Full post-work annealing is required to reattain maximum corrosion resistance. Cold Working: Although this alloy has a high work hardening rate, it can be drawn, headed, upset, and stamped. Full annealing is required after cold work to remove internal stress. Cold work will cause an increase in both hardness and strength. Annealing: 1900º º F (1038º º C), water quench. Hardening: This alloy does not respond to heat treatment metalsupermarkets.com
3 STEEL Data and Specifications 310 Relatively high chromium-nickel content makes this a superior steel in most environments over 304 and 309. Applications: Oven linings, boiler baffles, kilns, lead pots, radiant tubes, annealing covers, saggers, burners, combustion tubes, refractory anchor bolts, fire box sheets, furnace components and other high temperature containers. Analysis: C -.25 Max. Cr /26.00 Fe: Balance Mn Max. Ni -.19/.22 P Max. S -.03 Max. Si Max. Mechanical Properties: (following values are average and are representative) Annealed Tensile Strength (psi) 100 Max. Yield Point (psi) 35,000-55,000 Elongation (% in 2 ) 35 Rockwell Hardness 95 Max. Machinability: This alloy machines similarly to type 304 stainless. Its chips are stringy and it will work harden rapidly. It is necessary to keep the tool cutting at all times and use chip breakers. Weldability: Most austentitic stainless steels can be welded using fusion or resistance welding. Oxyacetylene not recommended. Hot working: Most hot work methods can be successfully performed after uniform heating to 2150º F (1177º C). Do not forge below 1800º F (982º C). Rapid cooling is required to maximize corrosion resistance. Cold Working: Can be drawn, heated, upset, and stamped. Full annealing is required after cold working to remove internal stress. Hardening: Does not respond to heat treatment. To increase hardness and strength cold working is recommended. 316 Low-carbon 18-8 chromium-nickel stainless steel with molybdenum added to increase corrosion resistance and mechanical properties at elevated temperatures. Non-magnetic in the annealed condition and not hardenable by heat treatment. Applications: Pump shafts and parts in machinery used to process paper, textiles, chemicals and pharmaceuticals. In aircraft applications, used for parts requiring low magnetic permeability and good corrosion resistance. Analysis: C -.08 Max. Mn Max. P -.04 Max. S -.03 Max. Si Max. Cr /18.00 Ni Cu -.75 Max. Mo /3.00 Max. N -.10 Max. Mechanical Properties: Maintains highest creep and tensile strength at elevated temperatures of any of the commonly used stainless steels. CF CF HR (under 1 2 dia) (over 1 2 dia) Tensile Strength (psi) ,000 75,000 Min ,000 Yield Point (psi) 45,000 Min. 30,000 Min. 30,000 Min Elongation (% in 2 ) 35 Min. 35 Min. 40 Min Reduction of Area (%) metalsupermarkets.com 115
4 STEEL Data and Specifications 316 (cont d) Weldability: Excellent. Annealing after welding recommended for maximum corrosion resistance. Surface Cutting Speed: 75 ft/min. Corrosion Resistance: Type 316 is more resistant to atmospheric and general corrosive conditions than any of the other standard stainless steels. Good resistance to sulfates, phosphates and other salts as well as reducing acids such as sulfuric, sulfurous and phosphoric. This grade is less susceptible to pitting in applications where acetic acid vapors or solutions of chlorides, bromides, or iodides are encountered. Resistance to Scaling: Excellent up to temperatures of 1650º F in continuous service. 316L The 316L grade (low carbon) precludes any harmful precipitation in the 800º F º F range that might result from welding heavier sections. This grade is available in precisionground pump shafting. 416 Chromium grade of stainless steel with phosphorous and sulfur added to improve machinability. Most readily machinable of the stainless grades. It is magnetic in all conditions and capable of a wide range of mechanical properties by heat treating. This grade is available in precision-ground pump shafting. Applications: Pump shafts and parts in machinery used in or around fresh water, food acids, and neutral and basic salts. Analysis: C -.15 Max. Mn Max. P -.06 Max. S -.15/.40 Max. Si Max. Cr /13.50 Ni -.75 Cu -.50 Max. Mo -.60 Max. Mechanical Properties: Maintains highest creep and tensile strength at elevated temperatures of any of the commonly used stainless steels. CF CF HR (under 1 2 dia) (over 1 2 dia) Tensile Strength (psi) ,000 75,000 Min ,000 Yield Point (psi) 45,000 Min. 30,000 Min. 30,000 Min. Elongation (% in 2 ) 35 Min. 35 Min. 40 Min. Reduction of Area (%) Weldability: Good. Large sections should be preheated prior to welding. Due to air hardening properties, annealing after welding is recommended to obtain maximum ductility and toughness. Surface Cutting Speed: 90 ft/min. Corrosion Resistance: Resistant to corrosion from the atmosphere, fresh water, iron-bearing mine waters, food acids, neutral and basic salts, mild acids and alkalis. Maximum corrosion resistance of this grade is obtained by hardening and polishing. Resists oxidation up to 1000º F metalsupermarkets.com
5 STEEL ANGLES STAINLESS STEEL ANGLES - HR ANNEALED and PICKLED A B C Lbs./Ft L L 3/4 X 3/4 X 1/8.590 X X 1 X 1 X 1/8.800 X X X 1 X 1 X 3/ X X 1/ X 1-1/4 X 1-1/4 X 1/ X X 3/ X 1/ X 1-1/2 X 1-1/2 X 1/ X X X 3/ X X X X 1/ X X X 2 X 2 X 1/ X 3/ X X X X 1/ X X X 3/ X X 2-1/2 X 2-1/2 X 3/ X 1/ X X X 3/ X 3 X 1-1/2 X 1/ X 3 X 2 X 3/ X 1/ X 3 X 3 X 1/ X X X 5/ X 3/ X X X 3-1/2 X 3-1/2 X 1/ X 4 X 3 X 1/ X 3/ X 4 X 4 X 1/ X X 3/ X 5 X 3 X 3/ X 5 X 5 X 3/ X 6 X 3 X 3/ X 6 X 4 X 1/ X 3/ X 6 X 6 X 3/ X One stop shopping for any metal, cut and ready, fast! metalsupermarkets.com 117
6 STEEL FLATS 304 and 316 STAINLESS STEEL FLATS - HOT ROLLED, ANNEALED and PICKLED Size Lbs./Ft /8 X 1/2.213 X 3/4.319 X X X 1-1/4.531 X X 1-1/2.638 X X 1-3/4.744 X X X 2-1/ X X X 3/16 X 1/2.319 X 5/8.398 X 3/4.478 X X X 1-1/4.797 X 1-1/2.956 X X 1-3/ X X X 2-1/ X X X X 1/4 X 1/2.425 X 5/8.531 X 3/4.638 X X X 1-1/ X X 1-1/ X X 1-3/ X X X X 2-1/ X X X X 3-1/ X X X X X 5/16 X X 3/8 X 1/2.638 X 3/4.956 X X 1-1/ X 1-1/ X X X 2-1/ X X X X X Size Lbs./Ft /8 X X X 1/2 X 3/ X X 1-1/ X 1-1/ X X X 2-1/ X X X X X X X X X 5/8 X 3/ X X 1-1/ X 1-1/ X X 1-3/ X X 2-1/ X X 3-1/ X X X X 3/4 X X X 1-1/ X 1-1/ X X 1-3/ X X X 2-1/ X 2-1/ X X X X 3-1/ X X X X X 1 X 1-1/ X X 1-1/ X X 1-3/ X X X 2-1/ X 2-1/ X X X X 3-1/ X X X X X metalsupermarkets.com
7 STEEL HEXAGONS STAINLESS STEEL HEXAGONS Size (inches) Lbs/Ft /8.046 X 3/ X 1/4.184 X X 5/ X X 3/8.414 X X 7/ X X X 1/2.736 X X X 9/ X 5/ X X X 11/ X X X 3/ X X X 13/ X 7/ X X X X 15/ X X X X X 1-1/ X X 1-1/ X X X X 1-3/ / X X X 1-5/ X X X X 1-3/ X X X 1-1/ X X X 1-5/ X X X X 1-3/ X X X 1-13/ X 1-7/ X X X X 2-1/ X X 2-1/ X X X X We ll load your order or deliver your order to you metalsupermarkets.com 119
8 STEEL PIPE STAINLESS STEEL PIPE - SEAMLESS and WELDED TYPES 304, 304L, 316, 316L, 309, and 310 Nom. Size (In) Lbs/Ft. O.D. I.D. Wall Thickness (Inches) SCHEDULE 10 1/ / / / / SCHEDULE / / SCHEDULE 40 1/ / / / / / We reduced our in-house metal inventory by shopping at Metal Supermarkets. They are our one stop shopping source for any metal we need metalsupermarkets.com
9 STEEL PIPE STAINLESS STEEL PIPE - SEAMLESS and WELDED TYPES 304, 304L, 316, 316L, 309, and 310 Nom. Size Lbs/Ft. O.D. I.D. Wall Thickness (Inches) SCHEDULE / / / SCHEDULE 80 1/ / / / / / / / / what you want, when you want the way you want. At Metal Supermarkets, we stock a wide variety of ferrous, non-ferrous, and specialty products in a wide variety of shapes (bar, tube, channel, angle, sheet and plate, perforated sheet). If you don t see what you re looking for, Call! metalsupermarkets.com 121
10 STEEL PLATE STAINLESS STEEL PLATE Thickness (In) Width Lbs./Sq. Ft L L 3/ X X X X X X X X X X X X X X X X 1/ X X X X X X X X X X X X X X X X X 5/ X X X X X X X X X 3/ X X X X X X X X X X X X X X X X X 1/ X X X X X X X X X X X X X X X X 5/ X X X X X X X 3/ X X X X X X X X 7/ X X X X X X X X X X X X X 1-1/ X X X X X 1-1/ X X X X X 1-3/ X X X X X X X X X X 2-1/ X X 2-1/ X X X X X X X X 3-1/ X X metalsupermarkets.com
11 STEEL ROUNDS STAINLESS STEEL ROUNDS - ANNEALED and CENTERLESS GROUND Size (inches) Lbs/Ft /8.042 X X X X 9/ X X 5/ X X 11/ X X 3/ X X X X 13/ X X 7/ X X 1/4.168 X X X X 17/ X X 9/ X X X 5/ X X X X 21/ X X 11/ X X 3/8.379 X X X X 25/ X 13/ X X 7/ X X X X 29/ X 15/ X X 31/ X 1/2.674 X X X X 33/ X X 17/ X X 9/ X X X X 19/ X X 5/ X X X X 41/ X 21/ X 11/ X X X 3/ X X X X 13/ X X 7/ X X X X 29/ X 15/ X X X X X X X 1-1/ X X 1-1/ X X X X 1-3/ X X X 1-1/ X X X X 1-5/ X X X 1-3/ X X X X 1-7/ X X X 1-1/ X X X X 1-9/ X X 1-5/ X X X metalsupermarkets.com 123
12 STEEL ROUNDS STAINLESS STEEL ROUNDS - ANNEALED and CENTERLESS GROUND Size (inches) Lbs/Ft / X 1-3/ X X X X 1-13/ X 1-7/ X X X 1-15/ X X X X X X 2-1/ X X 2-1/ X X X X 2-3/ X X X 2-7/ X X 2-1/ X X X X 2-5/ X X X 2-3/ X X X X 2-7/ X X X X X 3-1/ X X 3-1/ X X X X 3-1/ X X X X 3-3/ X X X X X X X 4-1/ X X X X 4-1/ X X X 4-3/ X X X X X X X 5-1/ X X X X X X STAINLESS STEEL ROUNDS - HOT ROLLED ANNEALED and ROUGH TURNED Size (inches) Lbs/Ft / X X X 6-1/ X X X 6-3/ X X X X X 7-1/ X 7-1/ X X X 7-3/ X X X X 8-1/ X X X X X X 9-1/ X X X X X X X X X X metalsupermarkets.com
13 STEEL SHEET TYPE 304 STAINLESS STEEL SHEET - No. 2B FINISH or with No. 4 POLISH ONE SIDE Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 28 Ga. (.015) 36 X X Ga. (.019) 36 X X X X Ga. (.025) 30 x X X X X X Ga. (.031) 30 X X X X X X X Ga. (.038) 30 X X X X X X X X X Ga. (.042) 36 X Ga. (.050) 30 x x X X X Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 18 Ga. (.050) 42 X X X X X X Ga. (.063) 30 X X X X X X X X X X X X X X Ga. (.078) 30 X X X X X X X X X X X X X Ga. (.090) 36 X X X X metalsupermarkets.com 125
14 STEEL SHEET TYPE 304 STAINLESS STEEL SHEET - No. 2B FINISH or with No. 4 POLISH ONE SIDE Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 12 Ga. (.109) 36 X X X X X X X X X X X Ga. (.125) 36 X X X X X X X X X X Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 10 Ga. (.141) 36 X X X X X X X X Ga. (.172) 36 X X X X X Ga. (.187) 48 X X X X X Common Stainless Sheet Finishes No. 2B Finish The Material is given a subsequent light skin pass cold rolling operation between polished rolls resulting in a uniform dull matt finish No. 4 Finish - This is a ground unidirectional finish obtained with 150 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer from fairly rough handling in service (eg restaurant equipment). No. 7 Finish - This is a buffed finish having a high degree of reflectivity. No. 8 Finish - This is produced in an equivalent manner to a No. 7 Finish, the final operations being done with extremely fine buffing compounds. The final surface is blemish free with a high degree of image clarity, and is the true mirror finish. Note - The finer polished finishes (No. 4, No. 6, No. 7 and No. 8) are generally only produced one side of the sheet, the reverse side being either a 2B or No. 3 Finish metalsupermarkets.com
15 STEEL SHEET TYPE 316 and 316L STAINLESS STEEL SHEET - No. 2B FINISH Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 26 Ga. (.019) 36 X Ga. (.025) 36 X X X Ga. (.031) 36 X X X Ga. (.038) 36 X X X X Ga. (.050) 36 X X X X Ga. (.063) 36 X X X X X X Ga. (.078) 36 X Gauge and Size (Inches) Lbs./ Sq. Ft. Est. Lbs./ Sheet 14 Ga. (.078) 36 X X X X Ga. (.109) 36 X X X X X X Ga. (.125) 36 X X X X X Ga. (.141) 48 x x x x Ga. (.172) 48 x x Ga. (.187) 48 x We have grinding, shearing, bending and other services metalsupermarkets.com 127
16 STEEL SHEET Any metal, Cut and Ready, Fast! With locations across the United States and Canada, fast turnaround time for delivery and orders processed while you wait, you know you can have your order when you want it. With production cutting, shearing on-site and aluminum plate cutting in the quantity and size you need, your order is always the way you want it. If you don t see what you re looking for, Call! Notes: metalsupermarkets.com
17 STEEL SQUARES STAINLESS STEEL SQUARES Size (inches) Lbs/Ft /8.053 X X X 3/ X X X X 1/4.213 X X X X 5/ X X X X 3/8.478 X X X X 7/ X X 1/2.850 X X X X 9/ X 5/ X X X X 3/ X X X X 7/ X X X X X X X X 1-1/ X 1-1/ X X X X 1-1/ X X X X 1-3/ X X X X X X 2-1/ X 2-3/ X 3-1/ X X what you want, when you want the way you want. At Metal Supermarkets, we stock a wide variety of ferrous, non-ferrous, and specialty products in a wide variety of shapes (bar, tube, channel, angle, sheet and plate, perforated sheet). If you don t see what you re looking for, Call! One stop shopping for any metal, cut and ready, fast! metalsupermarkets.com 129
18 STEEL TUBING 180 GRIT STAINLESS STEEL ROUND TUBING - ORNAMENTAL POLISH O.D. Wall Lbs./Ft. (Inches) Thickness Decimal 5/ / / / / / / / / GRIT STAINLESS STEEL SQUARE TUBING - ORNAMENTAL POLISH Size Wall Lbs./Ft. (Inches) Thickness Decimal 1/ / / / / / We reduced our in-house metal inventory by shopping at Metal Supermarkets. They are our one stop shopping source for any metal we need metalsupermarkets.com
19 STEEL TUBING / / / / TYPE 304 STAINLESS STEEL WELDED ROUND TUBING - MILL FINISH, STRUCTURAL GRADE O.D. Wall Lbs./Ft. (Inch) Thickness Decimal what you want, when you want the way you want. I needed one hundred pieces of aluminum cut in 2 pieces by the end of the day. Metal Supermarkets delivered the entire order by 3: metalsupermarkets.com 131
20 STEEL TUBING TYPE 304 STAINLESS STEEL WELDED ROUND TUBING - MILL FINISH, STRUCTURAL GRADE O.D. Wall Lbs./Ft. (Inch) Thickness Decimal TYPE 304 STAINLESS STEEL WELDED SQUARE TUBING - MILL FINISH, STRUCTURAL GRADE Size (Inches) Wall Lbs./Ft. Thickness Decimal 2 X X X X X X X X X X X X X X X X X X We reduced our in-house metal inventory by shopping at Metal Supermarkets. They are our one stop shopping source for any metal we need metalsupermarkets.com
21 STEEL TUBING TYPE 304/304L STAINLESS STEEL WELDED & SMLS ROUND TUBING ANNEALED and PICKLED, BRIGHT ANNEALED OR COLD FINISHED O.D. Wall I.D. Lbs./Ft. Welded Seamless (Inches) Decimal / X X 3/ X X 1/ X X X X X X X 5/ X X X X X 3/ X X X X X X 7/ X X X 1/ X X X X X X X X X 5/ X X X X X X X X X 3/ X X X X X We source hard to find metals. If you don t see what you re looking for, Call! metalsupermarkets.com 133
22 STEEL TUBING TYPE 304/304L STAINLESS STEEL WELDED & SMLS ROUND TUBING ANNEALED and PICKLED, BRIGHT ANNEALED OR COLD FINISHED O.D. (In) Wall I.D. Lbs./Ft. Welded Seamless Decimal / X X X 7/ X X X X X X X X X X X X X X X X X X X 1-1/ X X X X X X X X X 1-1/ X X X X X X X X X 1-3/ X X X X X X Order only what you need metalsupermarkets.com
The Convenience Stores For Metal
STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationAlloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
More informationFounded in 1985, Metal Supermarkets is the world s largest supplier of small quantity metals.
ABOUT US Founded in 1985, Metal Supermarkets is the world s largest supplier of small quantity metals. Our 80 plus locations in Canada, the United States and United Kingdom are dedicated to providing just
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
More information316/316L STAINLESS STEEL
316/316L STAINLESS STEEL Chemical Processing Equipment Exhaust Manifold Furnace Pans Marine Exposed Tubing TYPE 316 is widely used in applications requiring corrosion resistance superior to Type 304, or
More informationATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
More informationFSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates
FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...
More information316/316L STAINLESS STEEL
316/316L STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Valve and Pump Trim Digesters Chemical Equipment Evaporators Pharmaceutical and Photographic Equipment Applications Potential Type 316 Stainless
More informationThe Convenience Stores For Metal
TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationStainless Steel 310/310S (UNS S31000/ UNS S31008)
Stainless Steel 310/310S (UNS S31000/ UNS S31008) Austenitic Stainless Steel 310/310S offers excellent resistance to oxidation up to 2000oF. It is a low grade steel that prevents embrittlement and sensitization.
More informationIdentification. Type Analysis
Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationStainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationATI 332 ATI 332. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES TYPICAL ANALYSIS PHYSICAL PROPERTIES
ATI 332 Stainless Steel: Austenitic (UNS N08800) GENERAL PROPERTIES ATI 332 alloy is a nickel and chromium austenitic stainless steel designed to resist oxidation and carburization at elevated temperatures.
More informationThink Stainless, Think Encore STAINLESS STEEL FOR SPECIALTY APPLICATIONS. Specialty Metals to Support Innovative Manufacturing
STAINLESS STEEL FOR SPECIALTY APPLICATIONS Specialty Metals to Support Innovative Manufacturing Specialty Metals to Support Innovative Manufacturing Encore Metals is a specialist supplier of high grade
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More information201 STAINLESS STEEL. Appliances. Architectural Applications. Automotive Trim. Cooking Utensils
201 STAINLESS STEEL Appliances Architectural Applications Automotive Trim Cooking Utensils TYPE 201 is an austenitic, chromium-nickel-manganese stainless steel that was developed originally to conserve
More information301 STAINLESS STEEL. Aircraft Structural Parts. Automotive Trim. Cooking Utensils. Roof Drainage. Subway Cars
301 STAINLESS STEEL Aircraft Structural Parts Automotive Trim Cooking Utensils Roof Drainage Subway Cars TYPE 301 is an austenitic, chromium-nickel stainless steel. This alloy is non-magnetic in the annealed
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
2007 SECTION II, PART A SA-479/SA-479M SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS SA-479/SA-479M (Identical with ASTM Specification A 479/A 479M-04
More informationATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition.
ATI 418 SPL Stainless Steel (UNS S41800) GENERAL PROPERTIES ATI 418 SPL alloy (Greek Ascoloy) is a corrosion and heat resistant stainless steel similar in many respects to Type 410 but exhibiting improved
More informationMartensitic. stainless steels. Types 410, 420, 425 Mod, and 440A TECHNICAL DATA BLUE SHEET GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
TECHNICAL DATA BLUE SHEET Martensitic Stainless Steels s 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum s 410, 420, 425 Modified, and 440A (see composition on Page 2) are hardenable, straight-chromium
More information316/316L STAINLESS STEEL
316/316L STAINLESS STEEL P r o d u c t D ata B u l l e t i n Valve and Pump Trim Digesters Chemical Equipment Evaporators Pharmaceutical and Photographic Equipment Type 316 Stainless Steel is widely used
More informationGlossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationATI 904L ATI 904L. Technical Data Sheet. Stainless Steel: Superaustenitic INTRODUCTION COMPOSITION CORROSION RESISTANCE (UNS N08904)
ATI 904L Stainless Steel: Superaustenitic (UNS N08904) INTRODUCTION ATI 904L alloy (UNS N08904) is an austenitic stainless steel designed for a middle to high level of corrosion resistance. The alloy contains
More information304/304L STAINLESS STEEL
304/304L STAINLESS STEEL Architecural Moldings Kitchen Equipment Industrial Processing Equipment High strength, excellent corrosion resistance and excellent formability make Types 304 and 304L useful for
More information430 ULTRA FORM 430 STAINLESS STEEL
43 ULTRA FORM 43 STAINLESS STEEL Appliances Food Equipment General Construction Interior Architectural Trim Restaurant Equipment AK STEEL 43 ULTRA FORM STAINLESS STEEL was developed as a more formable
More informationATI 201 HP /ATI 201L HP
Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni
More informationStainless Steel Bars. Your foremost provider of specialty products, services and solutions
Stainless Steel Bars Your foremost provider of specialty products, services and solutions Quik Guide Quik Guide to SPECIFICATION (3) COMPOSITION % (2) TYPE AISI GRADE Unified Numbering System (UNS) AMS
More information304/304L STAINLESS STEEL
304/304L STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Architectural Moldings and Trim Textile Kitchen Equipment Paper Pharmaceutical and Chemical Industry Processing Equipment Applications Potential
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationNickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
More informationIncoloy Alloy 800H/800HT (UNS N08810/088011)
Incoloy 800H/800HT (UNS N08810/088011) Incoloy 800H/HT is an outstanding corrosion resistant alloy that is recommended for use in the high temperature industrial conditions. It has higher strength than
More informationCarpenter CTS BD1 Alloy
Type Analysis Carbon 0.85 to 0.95 % Manganese 1.00 % Phosphorus 0.040 % Sulfur 0.030 % Silicon 1.00 % Chromium 15.00 to 17.00 % Molybdenum 0.50 % Iron 79.48 to 81.58 % General Information Description Carpenter
More informationSubway Cars. Applications Potential
301 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Aircraft Structural Parts Roof Drainage Cooking Utensils Automotive Trim Subway Cars Applications Potential Type 301 is an austenitic chromium-nickel
More informationRA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
More informationPRESSURFECT CNG TUBE AND PIPE, SEAMLESS
PRESSURFECT CNG TUBE AND PIPE, SEAMLESS DATASHEET Pressurfect CNG is a dual grade certified (ASTM 316/316L) austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content used for
More informationStructural Channels A-36:20-40 LG. Standard Beams
Floor Plates #/Sq. Ft. 14 Ga. 3.75 12 Ga. 5.25 1/8 6.16 3/16 8.71 1/4 11.26 5/16 13.81 3/8 16.37 Plates #/Sq. Ft. 3/16 7.66 1/4 10.21 5/16 12.76 3/8 15.32 7/16 17.87 1/2 20.42 9/16 22.97 5/8 25.52 3/4
More informationSANDVIK 3R65 TUBE AND PIPE, SEAMLESS
SANDVIK 3R65 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R65 is a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. STANDARDS ASTM: TP316L, TP316 UNS: S31603, S31600
More informationMaterial Selection Jacob Klinginsmith, Russ Glass Naomi Sanders, Becky Moffitt
Material Selection Jacob Klinginsmith, Russ Glass Naomi Sanders, Becky Moffitt The most significant feature of our poster is the slider bar graph at the top of each material category. This quick reference
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationATI 321 /ATI 347 /ATI 348
ATI 321 /ATI 347 /ATI 348 Stainless Steel: Austenitic (UNS S32100, S34700, S34800) GENERAL INFORMATION ATI 321 (UNS S32100), ATI 347 (UNS S34700), and ATI 348 (UNS S34800) alloys are stabilized stainless
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS corrosion resistant alloys ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationSpecification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564
ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied
More informationNickel & Stainless Steel. Product Range
Nickel & Stainless Steel Product Range General Index ITEM BRAND SIZE Inconel 600 Inconel 601 Inconel alloy Inconel 625 Inconel 718 Monel 400 Monel alloy Monel K500 Nickel 52 Nickel alloy Nickel 200 Nickel
More informationATI Nb. ATI Nb. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES SPECIFICATION COVERAGE CHEMICAL COMPOSITION
ATI 20-25+Nb Stainless Steel: Austenitic (UNS S35140) GENERAL PROPERTIES ATI 20-25+Nb alloy is an austenitic stainless steel intended primarily for elevated temperature service. This alloy fills a performance
More informationBRODER METALS GROUP HTS 316
Broder Metals supply 316 and 316L stainless cold drawn in B8M Class 2, B8M Class 2B, A4-70 and A4-80. A4-70 and A4-80 are named by their minimum tensile strength to be met by the material (70 & 80) by
More informationHastelloy G-30 (UNS N06030) Chemical Composition
Hastelloy G-30 (UNS N06030) Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions. It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric
More informationModa 430/4016 EN , ASTM TYPE 430 / UNS S43000
Moda 430/4016 EN 1.4016, ASTM TYPE 430 / UNS S43000 General characteristics Moda 430/4016 is a classic 16 chromium ferritic stainless steel. Good corrosion resistance in mildly corrosive environments combined
More informationStainless Sheet 201, 301, 304, 304L, 309, 7 gauge - 28 gauge 316, 316L, 321, 409, 410, (.1793 to.0149 ) up to 72 wide 410S, 430, 439
Providing a World of Metals to Canada Diversified is a stainless steel and aluminum service center providing sheet, plate, bar, strip, tubing and structural angle to the Canadian market since 1971. After
More informationshort name: NR* technical product sheet created :57 1/10 seamless tube EN tol. acc. EN/ISO 1127 NR ,0 0,075 4,0 0,125
technical product sheet short name: NR* seamless tube EN 10216-5 tol. acc. EN/ISO 1127 Art.-Nr. kg s D NR-033-020 NR-030-040 NR-030-030 NR-030-020 NR-030-016 NR-028-035 NR-026-032 NR-026-026 NR-026-023
More informationGLOSSARY. Glossary. Material Terminology. Glossary METALS, ALLOYS & MATERIALS
Glossary Material Terminology ALLOY - Substance having metallic properties, composed of two or more chemical elements of which at least one is an elemental metal. ANNEALING - Heating to and holding a suitable
More informationIdentification. Type Analysis
Page 1 of 16 Unit Display: Metric Print Now Custom 465 Stainless E-Mail Datasheet Add to My Materials Request More Information U.S. Patent Number Identification 5,681,528 5,855,844 UNS Number S46500 Type
More informationTABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates
DRI1529-McNeilus-Revised 12/12/05 12:18 PM Page 1 McNeilus Steel, Inc. TABLE OF CONTENTS Page Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3 Cold Roll (Flats, Hex, Rounds) 17 Pipe, Pipe Tube,
More informationSANDVIK 3RE60 TUBE AND PIPE, SEAMLESS
SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC)
More information409 Ni STAINLESS STEEL
409 Ni STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Superior Corrosion Resistance to Mild and Low-Alloy Steels Cost Effective Alternative to Austenitic Stainless AK Steel 409 Ni Stainless Steel
More informationSECTION 9 Aluminum. SECTION 9: Aluminum General Information Diamond Floor Plate
Plate & Sheet Expanded Metal & Grating Structurals & Bar Shapes HR Bars & Reinforcing SECTION 9 Aluminum SECTION 9: Aluminum... 131 General Information... 132-134 Sheets... 135-137 Diamond Floor Plate...
More informationCHROMESHIELD 22 STAINLESS STEEL
CHROMESHIELD 22 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Appliances Food Service Equipment Architectural Welded Components Tubing Cookware Applications Potential CHROMESHIELD 22 Stainless Steel
More informationFree Machining Martensitic stainless steel. Oxidation resistance in continuous service to 1200 F (650 C).
Description 416 is a free machining martensitic grade. The unique production process developed exclusively by Ugitech results in a product that delivers superior productivity and tool life, and improves
More informationATI 332Mo. ATI 332Mo. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES COMPOSITION PHYSICAL PROPERTIES (UNS S35125)
ATI 332Mo Stainless Steel: Austenitic (UNS S35125) GENERAL PROPERTIES ATI s ATI 332Mo alloy is an austenitic stainless steel intended primarily as an economical material for automotive flexible connectors.
More informationSTAINLESS STEEL STAINLESS HALF-ROUNDS STAINLESS SQUARES 303, 304/304L, 316L, 416, 17-4,
STAINLESS STEEL TECHNICAL DATA and APPLICATIONS Grade 201...9-2 Grade 303 and 303 G&P...9-3 Grade 304 and 304L...9-4 Grade 316L and 316L BSQ...9-5 Grade 410...9-6 Grade 416 and 416 PSQ...9-7 Grade 420...9-8
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 430 UNS S43000 EN 1.4016 INTRODUCTION 430 SS is a plain chromium ferritic stainless steel. With 17% chromium, the steel has good
More information316Ti Stainless Steel, UNS S31635
316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic
More informationTypes 316 (S31600), 316L (S31603), 317 (S31700), 317L (S31703)
Types 316 (S31600), 316L (S31603), 317 (S31700), 317L (S31703) GENERAL PROPERTIES Types 316 (UNS S31600), 316L (S31603), 317 (S31700) and 317L (S31703) are molybdenum-bearing austenitic stainless steels
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
More informationDatasheet for Steel Grades Superalloys Incoloy 800
This page is mainly introduced the Incoloy 800 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It
More informationTechnical Data. BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA. Stainless Steels Types 321, 347 and 348 (UNS S32100, S34700 and S34800)
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Stainless Steels Types 321, 347 and 348 (UNS S32100, S34700 and S34800) GENERAL PROPERTIES Allegheny Ludlum Type 321 (S32100), 347
More informationImpact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
More informationSANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS
SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R12 is an austenitic stainless chromium-nickel steel with a low carbon content used for medical and dental instruments.
More information409 Ni STAINLESS STEEL
409 Ni STAINLESS STEEL Bus Frames Dryer Component Intermodal Containers Rail Cars Trailers AK STEEL 409 Ni is an ideal material for applications requiring weldability and toughness superior to standard
More informationStandard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire 1
Designation: B 473 96 (Reapproved 2002) e Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire This standard is issued under the fixed designation B 473; the number
More information15-5 PH STAINLESS STEEL
Aerospace Chemical Food Processing Metalworking Paper Industries AK STEEL offers a combination of high strength and hardness, good corrosion resistance plus excellent transverse mechanical properties.
More informationBorn from fire, made to endure NICKEL ALLOYS
Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster
More informationMore About Steel Alloys
More About Steel Alloys Chemical Composition Limits (%) of Steel Alloys Iron makes up the remaining percentage. Warning: Chemical properties are not guaranteed and are intended only as a basis for comparison.
More informationATI 441 HP ATI 441 HP. Technical Data Sheet. Stainless Steel: Ferritic INTRODUCTION STRUCTURE TYPICAL COMPOSITION (UNS S44100)
ATI 441 HP Stainless Steel: Ferritic (UNS S44100) INTRODUCTION ATI 441 HP alloy is a heat resisting ferritic grade that provides good oxidation and corrosion resistance for applications like automotive
More informationApplications Potential
P R O D U C T D A T A B U L L E T I N STAINLESS 301STEEL UNS S30100 High Strength and Good Ductility When Cold Worked Excellent Corrosion Resistance Readily Welded Readily Formed and Drawn Economical Oxidation
More informationUNSURPASSED QUALITY AND SERVICE
Penn Stainless Products Premier Processor and Supplier of Stainless Steel Products www.pennstainless.com ISO EXPANSIVE INVENTORY Penn Stainless Products, Inc. supplies quality stainless products and value-added
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationINCOLOY 800H / 800HT
INCOLOY 800H AND 800HT ARE A NICKEL IRON CHROMIUM ALLOY WITH VERY GOOD STRENGTH AND EXCELLENT RESISTANCE TO OXIDATION AND CARBURIZATION IN HIGH TEMPERATURE ENVIRONMENTS. THESE NICKEL STEEL ALLOYS ARE INDISTINGUISHABLE
More informationMSE-226 Engineering Materials
MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon
More informationATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet
Alloy (UNS S31803 and S32205) Duplex Stainless Steel GENERAL PROPERTIES alloy (UNS S31803 and/or S32205) is a nitrogenenhanced duplex stainless steel alloy. The nitrogen serves to significantly improve
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA-268/SA-268M ASME BPVC.II.A-2015 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1. Scope 1.1 This specification covers a number of
More informationChemical Processing Equipment. Distillation Towers. Oil Refineries
410S STAINLESS STEEL Chemical Processing Equipment Distillation Towers Oil Refineries Trays TYPE 410S is a low-carbon, non-hardening ferritic stainless steel. The ability to cool from elevated temperatures
More informationNickel-Chrome Alloy Inconel 625 (UNS N06625)
NickelChrome Alloy Inconel 625 (UNS N06625) Inconel Alloy 625 is a corrosion and oxidation resistant nickel alloy that is employed for its high strength and good aqueous corrosion resistance properties.
More informationNominal Analysis (AISI 01) Carbon-.90 Tungsten / / / /32 7/64 1/8
OIL HARDENING PRECISION Ground FLAT STOCK (REGULAR SIZE AND OVERSIZED) STARRETT SERIES 783: 18 Lengths STARRETT SERIES 784: 36 Lengths For Tolerances see page 625. Nominal Analysis (AISI 01) Carbon-.90
More information1. Scope :- 2. Referenced Documents :-
Standard Specification for Forged or Rolled N06030, N06022, N06035, N06200, N06059, N06686, N08020, N08024, N 08026, N08367, N10276, N10665, N10675, N 10629, N08031, N06045, N06025, and R20033 Alloy Pipe
More informationAL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)
AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.
More informationThese elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationINCOLOY DATA SHEET
OTHER COMMON NAMES: ALLOY 800 IS A NICKEL IRON CHROMIUM ALLOY. IT HAS VERY GOOD STRENGTH AND EXCELLENT RESISTANCE TO OXIDATION AND CARBURIZATION IN HIGH TEMPERATURE ENVIRONMENTS. HIGH CHROMIUM CONTENT
More informationSTAINLESS STEEL DATASHEETS
STAINLESS STEEL DATASHEETS Alloys: 304 304L 310 316 316L 316LN 316Ti 316LVM 6Mo 21-6-9 22-13-5 904L Alloys 304 / 304L Alloys 304 / 304L (UNS S30400 / S30403) Alloys 304 (S30400) and 304L (S30403) stainless
More information