VACUUM FILMS RANGE. Elongation on break. Color. Name Description Max. use T C
|
|
- Griselda Morton
- 6 years ago
- Views:
Transcription
1 VACUUM FILMS RANGE Name Description Max. use T C SK2VF120-1 SK2VF125-1 SK2VF180-1 SK2VF180-2 SK2VF205-1 SK2VF205-2 SK2VF205-3 SK2VF220-1 Folding shape dimensional chart Multilayer vacuum film for manufacturing of wide and complex structures Thermoplastic elastomer film for debulking processes Standard nylon vacuum bagging film Nylon vacuum film for manufacturing of wide structures in the oven Nylon vacuum film for autoclave and oven applications Embossed nylon film for debulking processes Extra wide nylon vacuum bagging film Heat-resistant nylon film for autoclave and oven applications 120 C Elongation on break 460%/ MD/ 520% TD Color Green 125 C 550% Natural 180 C 380% Clear 180 C 365% Light blue 205 C 400% Green 205 C 400% Transparent 205 C 400% Transparent 220 C 380% Blue SK2VF400-1 Ultra high temperature bagging polyimide film 400 C 50% Amber Page 1 of 13
2 SK2VF120-1 Multilayer vacuum bagging film SK2VF120-1 is a tough, puncture resistant co-extrusion of polyethylene and nylon based resins vacuum film, which is designed for use in the production of polyester / vinylester resin infused components for the wind energy, marine and general composite industries. The product can be used in the production of epoxy resins prior to testing chemical resistance with specific resin. It is particularly interesting due to its limited sensitivity to low humidity levels which are often problematic to predominantly nylon based films as the lack of moisture can reduce flexibility. This ensures consistent yearlong performance in all workshop environments. Polyethylene / Nylon Color: Green Tensile strength at break MD N/mm 2 : 39, 3 ± 10% ASTM D882 Tensile strength at break TD N/mm 2 : 37, 5 ± 10% ASTM D882 Elongation at break MD: 460% ± 10% ASTM D882 Elongation at break TD: 520% ± 10% ASTM D882 Tear strength MD: 1,3 N ISO Tear strength TD: 1,5 N ISO Maximum use temperature: 120 C Thickness Width Length Folding shape 2000mm 400m SHT 75µm ± 10% 4000mm 200m CF 105m LGT 6000mm 125m LGT Page 2 of 13
3 SK2VF120-1 Multilayer vacuum bagging film 8000mm 80m LGT 10000mm 75m LGT 80µm ± 10% 12000mm 75m LGT 30m LGT 16000mm 70m LGT Shelf life: unlimited. Storage conditions: recommended temperatures between +5 C and +25 C, and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. For the roll with width 16000mm other lengths are available under request. Folding shapes: SHT - sheeting, CF - centerfold, LFT = lay-flat tubing, LGT- lay-gusseted tubing. For more information, please read the technical information page: SK2VF_Folding shape. Page 3 of 13
4 SK2VF125-1 This highly elastic elastomer vacuum film can be perfectly used for debulk applications and deep drawing. The film has high mechanical stability (resistant to puncture), high abrasion resistance, good resistance to oil, lubricants and many solvents. Product is free from solvents and softeners. Thermoplastic elastomer Color: Natural Elongation at break: 550% DIN EN ISO 527 Tear strength: 50kN/m DIN ISO 34-1,B Maximum use temperature: 125 C Softness temperature: 155 C-170 C Density: 1,15g/cm³ Thickness Width Length 100µm 1500mm 250m 200µm 1500mm 125m 250µm 1500mm 100m Shelf life: 2 years Storage conditions: recommended T=20 C (+/- 5 C), and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. Other thicknesses and width are available on special order: Available thickness: from 25µm till 500µm Available widths, depend of film thickness: from 1m till 2,5m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF centerfold Page 4 of 13
5 SK2VF180-1 Transparent nylon bagging film is formulation of Nylon 6 and Nylon 66 resin. Film has good elongation and could be used for cure cycle by temperatures up to 180 C. Nylon Color Clear Elongation at break 380% ASTM D882 Tensile strength psi ASTM D882 Maximum use temperature 180 C Melting Point: >240 Materials to avoid Phenolic resins/strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm Widths: 0,91m till 3,55m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF - centerfold, LFT - lay-flat tubing Page 5 of 13
6 SK2VF180-2 SK2VF180-2 is a flexible bagging film made of extruded nylon. It is especially recommended for the production of advanced composite elements such as wind blades, boat hulls and sails.this product is an ideal film for the resin infusion processes and pre preg, resistant to most common types of resins, resistant to the high temperatures of the polymerization oven. SK2VF180-2 is not suited for application in autoclave. Extruded nylon Color: Light blue Elongation at break: 365% ASTM D882 Longitudinal tensile strength: 37.5MPa ASTM D882 Maximum use temperature: 180 C Thickness Width Length Folding shape 2000mm 250m V- sheet 75µm ± 5% 4000mm 250m V- sheet 6000mm 125m V- sheet 8000mm 105m Gusset Shelf life: 12 months Storage conditions: recommended temperatures between +5 C and +25 C, and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. Film available as: V- sheet, Gusset Page 6 of 13
7 SK2VF205-1 Transparent nylon bagging film is formulation of Nylon 6 and Nylon 66 resin. Film has very good elongation and could be used for cure cycle by temperatures up to 205 C. Nylon Color Green Elongation at break 400% ASTM D882 Tensile strength psi ASTM D882 Maximum use temperature 205 C Melting Point: >240 Materials to avoid Phenolic resins/strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm Widths: 0,91m till 3,55m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF - centerfold, LFT - lay-flat tubing. Page 7 of 13
8 SK2VF205-2 SK2VF205-2 is an embossed etched nylon bagging film recommended for advanced composite manufactured under vacuum moulding or infusion. The structure allows a good resin or air flow. By using this film you replace both: net bleeder and breather. Perfect for debulking operation. This etched film has an excellent heat stability and very good mechanical properties. It is a styrene resistant film and non-porous. Do not use this film in direct contact with phenol resin. Nylon Color: Transparent Weight: 84g/m² Elongation at break: 400% ASTM D882 Maximum use temperature 205 C Materials to avoid Phenolic resins Density: 1,12g/cm³ Thickness Width Length 75µm 1600mm 125m Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Do not expose this film to the day light. Film is UV sensitive. Film available as: SHT sheeting Total thickness of film though embossing is 430µm. Page 8 of 13
9 SK2VF205-3 Transparent nylon bagging film has excellent heat stability and very good chemical resistance, made of heat stabilized nylon 66. This film has high elongation and could be used for cure cycle by temperatures up to 205 C. Nylon 66 Color Clear Elongation at break 400% ASTM D882 Maximum use temperature 205 C Materials to avoid Phenolic resins/strong oxidizers Thickness Width Length Form 50µm 4570mm 229m CF - centerfold Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Do not expose this film to the day light. Film is UV sensitive. Page 9 of 13
10 SK2VF220-1 Unique nylon bagging film is formulation of Nylon 66 resin. Film provides superior chemical and thermal resistance and could be used for cure cycle by temperatures up to 220 C. Nylon Color Blue Elongation at break 380% ASTM D882 Tensile strength psi ASTM D882 Maximum use temperature 220 C Melting Point: 256 C Materials to avoid Strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Page 10 of 13
11 Folding shape SHT = sheeting The width of the SHT roll in the Product reference is dedicated as W. CF = centerfold The width of the roll CF in the Product reference is dedicated as 2W. LFT = lay-flat tubing The width of the roll LFT in the Product reference is dedicated as W. LGT = lay-gusseted tubing W P The width of the roll LGT in the Product reference is dedicated as 2W+2P. Page 11 of 13
12 Dimensional chart SHT (sheeting) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 54 1, , , , , , CF (centerfold) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 96 2, , , , , , , , LFT (lay-flat tubing) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 27 0, , , , , , , , , , , , Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm. Width: from 0,91m till 3,56m By special request MOQ has to be ordered. Page 12 of 13
13 SK2VF400-1 This polyimide film balances excellently electrical, thermal, mechanical, physical and chemical properties in a wide range of temperatures. It can be used at extreme temperatures as low as -261 C or as high as +400 C. SK2VF400-1 can be laminated, metallized, stamped, formed or coated with an adhesive layer. Polyimide Color Amber Elongation at break 50% ASTM D882 Tensile strength 165 MPa ASTM D882 Maximum use temperature 400 C Surface weight (theoretical) 108,7 g/m² for 75µm Thickness Width Length Weight appr. 75µm 1520mm 90m 14,9 kg Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: 25, 50, 125µm By special request MOQ has to be ordered. Film available as: SHT sheeting. Page 13 of 13
DATA SHEET HK900 BAGGING FILM
HK900 BAGGING FILM HAWKEYE HK900 BAGGING FILM is a cast nylon, heat-stabilized film. This film has a melt point of 510 degrees F (265 degrees C) for increased stability in higher temperature applications
More informationDATA SHEET HK900 BAGGING FILM
HK900 BAGGING FILM HAWKEYE HK900 BAGGING FILM is a cast nylon, heat-stabilized film. This film has a melt point of 510 degrees F (265 degrees C) for increased stability in higher temperature applications
More informationDATA SHEET A5000 RELEASE FILM
A5000 RELEASE FILM HAWKEYE A5000 RELEASE FILM is a high temperature release film which lends itself readily to overcome bridging in contour layups. With more elongation than the HK3760 or nylon films,
More informationRELEASE FABRICS. A-8888 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked, polymer finish Weight: 2.2 oz.
RELEASE FABRICS A-8888 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked, polymer finish Weight: 2.2 oz./yd 2 B-4444 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked,
More informationA8888 RELEASE FABRIC
A8888 RELEASE FABRIC A8888 RELEASE FABRIC is an open weave synthetic polyamide fabric with good hand and drapability, coated with a specially formulated release agent. It has been used on 350 degrees F
More informationProperty Thickness Units Value Test Method Test Conditions μm MD* TD* N/mm² % 170. Shrinkage % DIN C, 15 min.
Hostaphan WN Translucent white film Hostaphan WN is a white film made of polyethylene terephthalate (PET) and is well suited for electrical insulating of machines and appliances. The high dielectric strength
More informationVacuum Infusion What are the Benefits?
Vacuum Infusion What are the Benefits? What production system are you using now? Are you using vacuum bagging already or working open mould methods? Are you in pre-preg production (autoclave or oven cure)
More informationTECHNICAL DATA SHEET GRIVORY G 16
TECHNICAL DATA SHEET GRIVORY G 16 General product description Grivory G 16 is a low viscosity amorphous copolyamide. It is suitable for injection - stretch blow moulding, injection blow moulding, extrusion
More informationProduct specification TiNOX energy
Product specification TiNOX energy 1. Technical properties of the coating Version 6 of the 12 th April 2018 TiNOX energy is a highly selective absorber coating deposited in an environmental friendly air
More informationDELIVERING THE FUTURE
DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS CORE MATERIALS PROCESSING GUIDE CONTACT@GURIT.COM WWW.GURIT.COM KEY POINTS SUMMARY DESCRIPTION Gurit can supply a large range of core products for composite
More informationAutotex Steel. Product data sheet
Autotex Steel Product data sheet Autotex Steel (S) is a textured polyester film that when printed with a specialist metallic ink creates a stainless steel look. Autotex S was developed to enable screen
More informationSMARTCARE DAMP PROOF TECHNICAL PARAMETERS
SMARTCARE DAMP PROOF Asian Paints SmartCare Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers
More informationFilm. Packaging Film Laminate Bags for Silicon Wafer Case Packaging
Film Packaging Film Laminate Bags for Silicon Wafer Case Packaging Laminate Bags for Silicon Wafer Case Packaging The purity of silicon wafers used for ICs and other devices is 99.999999999% or higher,
More informationHigh Performance Films
High Performance Films WIDEST RANGE OF HIGH-PERFORMANCE FLUOROPOLYMER FILMS IN THE INDUSTRY As the fluoropolymer experts, TCI offers a vast knowledge of diverse fluoropolymer technologies and superior
More informationDELIVERING THE FUTURE
DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS CORE MATERIALS PROCESSING GUIDE CONTACT@GURIT.COM WWW.GURIT.COM KEY POINTS SUMMARY DESCRIPTION Gurit can supply a large range of core products for composite
More informationExtruded Technical Film Solutions
Extruded Technical Film Solutions Ex Tech is a full range of high-perfmance thermoplastic films & sheets, including polyurethane (TPU), polyester, polyamide, polyolefin and aliphatic urethanes. These materials
More informationDATA SHEET HK312 SEALANT TAPE
HK312 SEALANT TAPE HAWKEYE HK312 SEALANT TAPE is a black, aggressively tacky rubber-based sealant with excellent cohesive and adhesive properties. It was developed as a universal sealant for sealing all
More informationA8888 RELEASE FABRIC
A8888 RELEASE FABRIC A8888 RELEASE FABRIC is an open weave synthetic polyamide fabric with good hand and drapability, coated with a specially formulated release agent. It has been used on 350 degrees F
More informationTRANSPARENT MATERIALS
LAMINATING TRANSPARENT MATERIALS GLASSES ACRYLIC POLYCARBONATE 22 Kambio Corporation www.kambiosecurity.com GLASSES Armored glass is composed of several layers of polycarbonate, polyurethane and glass.
More informationAutotex Brushed Product data sheet
Autotex Brushed Product data sheet Autotex Brushed (B) is the new finish in the Autotex film range. It is a textured hardcoat that when printed with a specialist metallic ink creates a long line stainless
More informationLOW TEMPERATURE CURE HIGH TOUGHNESS EPOXY PREPREG SYSTEM. Excellent balance of mechanical properties and toughness
General Datasheet SE 70 LOW TEMPERATURE CURE HIGH TOUGHNESS EPOXY PREPREG SYSTEM Low temperature 70 C (158 F) curing Faster cycle times at elevated temperature Excellent balance of mechanical properties
More informationProduct Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Typical applications. Features. Finish and Color. TIGER Shield
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationSECTION WINDOW FILM. A. Section Windows; windows to receive architectural window film.
SECTION 08870 WINDOW FILM PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and security films. 1.2 RELATED SECTIONS A. Section 08500 - Windows; windows to receive architectural window film. B. Section 08600
More informationVacuum infused thermoplastic composites for wind turbine blades
Vacuum infused thermoplastic composites for wind turbine blades 28-10-2009 Julie Teuwen, Design and Production of Composites Structures Delft University of Technology Challenge the future Introduction
More informationSECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved
SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security
More informationEFFISUS EASYREPAIR MEMBRANE
Effisus Easyrepair Membrane EFFISUS EASYREPAIR MEMBRANE DESCRIPTION For use on virtually all roofs, Effisus Easyrepair Membrane features an UV stable backing that is available in Black, Gray, Tan, and
More informationPRODUCT DATA SHEET TYPICAL NEAT RESIN PROPERTIES. Dielectric Constant at 10 Ghz on 4581 quartz Loss Tangent at 10 Ghz on 4581 quartz...0.
PRODUCT TYPE 250 F (121 C) Cure Epoxy TYPICAL APPLICATIONS Secondary Aircraft Structures Radomes with Spectra, Glass, Quartz & Kevlar Reflectors Sporting Goods Knee Braces and Other Related Medical Items
More information3 Bonding Film. Technical Data July, 2002
Technical Data July, 2002 Product Description 3M is a three layer bonding film consisting of a 2 mil polyester film core coated both sides with 2 mils of a polyester based thermoplastic adhesive. This
More informationALCHEMIX RTV 256 Silicone Rubber
TECHNICAL DATA SHEET ALCHEMIX RTV 256 Silicone Rubber Addition cure silicone rubber High tear strength, 34 Shore A hardness RTV 256 is a two component addition cure silicone rubber with a Shore A hardness
More informationCUSTOM HEALTHCARE SOLUTIONS
CUSTOM HEALTHCARE SOLUTIONS CONVERTING Q.Control T. NO. 39208 120 T rate EXTRUSION 90 60 30 Return G. Control FOAM COATING Overview Corporate Overview Scapa Medical is a fully integrated worldwide supplier
More informationTechnical data sheets
Advanced Vacuum System materials for Vacuum processing TORINO Technical data sheets VABER INDUSTRIALE S.p.A. Alessandro Damiano Resp. Divisione Vuoto +39 338 57.10.117 a.damiano@vaber.it Strada San Mauro,
More informationTECHNICAL DATA SHEET. Solmax HDPE Reflective Smooth - Imperial Values SPECIFICATIONS PROPERTY TEST FREQUENCY (1) UNIT. Solmax 460W-1000.
HDPE Reflective Smooth Values International Inc., 2801 Boul. MarieVictorin, Varennes, Qc, Canada, J3X 1P7 460W1000 480W1000 500W1000 SPECIFICATIONS Thickness (min. avg.) Thickness (min.) Resin Density
More informationTechnical Information and Test Results for FenForm TM Silicone Sheet Composite Manufacturing
Technical Information and Test Results for FenForm TM Silicone Sheet Composite Manufacturing 1 Contents FenForm TM Typical Physical Properties 4 General Materials Properties 4 Recommended Curing Conditions
More informationTECHNICAL DATA NEAT RESIN MECHANICAL PROPERTIES
TYPICAL APPLICATIONS Marine Structures Dielectric Structures Aerospace Structures PRODUCT FORMS Unitape to 24 Inches Wide Fabric Prepreg to 50 Inches Wide TYPICAL CURE PARAMETERS (If Aerospace applications
More informationExtreme Sealing Tape
Extreme Sealing Tape Technical Data September, 2014 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.
More informationEFFISUS ECORK INSULATION
EFFISUS ECORK TECHNICAL DATA SHEET Effisus Ecork Insulation EFFISUS ECORK INSULATION DESCRIPTION Expanded insulation cork board. For use as internal insulation for buildings (see EN 13710) according to
More informationMethods of Making 3-Dimensional Shaped Composite Structures
Methods of Making 3-Dimensional Shaped Composite Structures Parvinder Walia, George Klumb, Jason Reese, Jack Hetzner, Dave Bank, and Keith Kauffmann The Dow Chemical Company, Midland, MI 48667 Abstract
More informationSECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved
SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security
More informationNOMEX TYPE 410 TECHNICAL DATA SHEET. Electrical properties. Please note: PERFORM WHEN THE HEAT S ON TYPICAL ELECTRICAL PROPERTIES
NOMEX TYPE 41 NOMEX Type 41 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. NOMEX Type 41 is the original form of NOMEX
More informationSpecialty Adhesives for Graphic Arts Applications SIGNS FRAMES GRAPHICS DISPLAYS
Specialty Adhesives for Graphic Arts Applications SIGNS FRAMES DISPLAYS GRAPHICS SIGNS GRAPHICS FRAMES DISPLAYS LABELS IMAGE PLAQUES NAMEPLATES S capa North America is a world-class manufacturing operation
More informationSift-Socks Nylon Connectors
JANUARY 2018 Sift-Socks Nylon Connectors RUBBER-COATED NYLON (RCN) Very pliable soft rubber coating on a two-way nylon backing. The rubber portion of the rubber coated nylon fabric is in compliance with
More informationFOAM IN NEW DIMENSIONS
FOAM IN NEW DIMENSIONS Seite 2 Examples of use 3 3D CORE Benefits and function 4 3D CORE Product range 5 6 Comparison of technical values 7 8 Comparison of cost and weight 9 Foam Core Navigator 10 11 Tips
More informationTECHNICAL DATA SHEET GRILAMID L 25
TECHNICAL DATA SHEET GRILAMID L 25 General product description Grilamid L 25 is a high viscosity polyamide 12. This product has the following features: Very tasteless High toughness, even at low temperatures
More informationPACKED, WRAPPED AND SEALED DOMAMID FOR EXTRUSION PACKED, WRAPPED & SEALED
PACKED, WRAPPED AND SEALED FOR EXTRUSION PACKED, WRAPPED & SEALED Powerful extrusion solutions by DOMO Throughout the world DOMO Chemicals represents values such as flexibility, speed and manufacturing
More informationFoil-Faced Fiberglass Fabric 84215/9480 HT
Foil-Faced Fiberglass Fabric 84215/9480 HT Description Foil-Faced Fiberglass Fabric 84215/9480 HT has been specifically designed as shipboard lagging and jacketing material for use over insulation where
More informationPB 170, PB 250, PB 400, PB 600
Page 1 / 13 PB 170, PB 250, PB 0, PB 600 Cellular Epoxy Foam Production System PB products are 2 component epoxy foaming formulations developed for in situ low density epoxy foam production. Foam final
More informationHIGH QUALITY EVA FILM FOR ENCAPSULATING SOLAR PANELS / GLASSES
HIGH QUALITY EVA FILM FOR ENCAPSULATING SOLAR PANELS / GLASSES Zhejiang Zhengxin Photovoltaic Technology Co., Ltd. 36 Xichunzhong Road, Quzhou, Zhejiang Province, China 324002 T:0570-2852288 F:0570-2852298
More informationCONTENTS: POLYETHYLENE POLYPROPYLENE HDPE EX EX3-88S 2 EX3-188S 3 EX5 (HM9458F) F (FILM GRADE) 5 LDPE LLDPE 289AA 6 HOMOPOLYMER
CONTENTS: POLYETHYLENE HDPE EX3-88 1 EX3-88S 2 EX3-188S 3 EX5 (HM9458F) 4 7888F (FILM GRADE) 5 LDPE LLDPE 289AA 6 POLYPROPYLENE HOMOPOLYMER Z69S (552R) 7 HP558J 8 Contact 9 EX 3-88 License grade code HM
More informationPRODUCT DESCRIPTION RENOLIT ARMOUREN
PRODUCT DESCRIPTION RENOLIT ARMOUREN PRODUCT DESCRIPTION RENOLIT ARMOUREN GENERAL DESCRIPTION RENOLIT ARMOUREN is a multi-layered decorative PVC film which is suitable for thermo-forming or flat lamination
More informationFilm PEEK and Kapton. Rod / Tube PEEK, OFE Copper, and 304 Stainless Steel
UHV s UHV s Film PEEK and Kapton Features Ultrahigh vacuum compatible Cleaned for vacuum service Temperature specified for each material Specifications Vacuum Range UHV, Ultrahigh vacuum HV, High vacuum
More informationNORTON. High-Performance Films. A Saint-Gobain Brand. Norton. Chemfilm. FluoroLam. FluoroLease
NORTON High-Performance Films A Saint-Gobain Brand Norton Chemfilm FluoroLam FluoroLease Saint-Gobain Performance Plastics Specialty and High-Performance Films GENERAL PROPERTIES Specific Gravity Area
More informationProduct Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90701) Typical applications. Features. Finish and Colour. TIGER Shield
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90701) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationCrystal Cast 1000A : Crystal Cast 1000B By Weight 100 : 120. Appearance - Clear liquid Clear liquid Clear liquid
Crystal Cast 1000 Two Part Casting System Water Clear, UV Stable Crystal Cast 1000 is a two component thermoset system which is water clear when cured. Crystal Cast 1000 is ideal for rapid prototyping,
More informationMANUFACTURING WITH COMPOSITES 2
MANUFACTURING WITH COMPOSITES 2 WCC WEBINAR 10 th June 2011 1 AIMS OF WEBINAR To give an overview of the most important manufacturing methods for composite materials Covering suitable materials, typical
More informationGRI - GM13 Standard Specification*
Standard Specification for GRI - GM13 Standard Specification* Revision 14: January 6, 2016 Revision schedule on pg. 11 Test Methods, Test Properties and Testing Frequency for High Density Polyethylene
More information4411N 4411G 4412N 4412G
Extreme Sealing Tape Technical Data October, 2011 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.
More informationComposite Materials. Manufacturing processes for Polymer Matrix Composites
Composite Materials Manufacturing processes for Polymer Matrix Composites Polymer Matrix Composites The method of manufacturing composites is very important to the design and outcome of the product With
More informationWherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS
Wherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS Working with Kömacel Machining Kömacel sheets can be easily and quickly worked with standard tools to process wood and metal
More informationTenCate BT250E-1 PRODUCT DATA SHEET
DESCRIPTION TenCate s BT250E-1 resin system is a 121 C (250 F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum bag/oven cure only.
More informationAUTOSTAT PRODUCT DATA SHEET
AUTOSTAT PRODUCT DATA SHEET Heat stabilised polyester film has low residual shrinkage at elevated temperatures. This is essential when tight registration tolerances need to be maintained during multiple
More informationOpen new market opportunities with BioPBS TM /PLA. InnoBioPlast 2016 September 15, 2016
Open new market opportunities with BioPBS TM /PLA InnoBioPlast 2016 September 15, 2016 Agenda Introduction to BioPBS TM BioPBS TM /PLA compound Takeaway Points Acknowledgement More People, More Plastics
More informationSIL CLASS VI SUPPORTED HIGH CONSISTENCY SILICONE ELASTOMER
LIFE SCIENCES PREMIUM CARE LINE SIL2-5030 CLASS VI SUPPORTED HIGH CONSISTENCY SILICONE ELASTOMER DESCRIPTION APPLICATION A two-part, high consistency elastomer designed for optimal performance in a wide
More informationSECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved
SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security
More information2013 Product Catalogue
2013 Product Catalogue We Change Chemistry Of The Structure. The quality of the materials used in building and construction areas are also increasing and as a result, lifting our standarts of living to
More informationPolyamide 6 for Packaging and Film
Polyamide 6 for Packaging and Film Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization & Polymer Additivation NUREL s long term experience in polymerization processes and polymer
More informationSIGRAFIL C. The PAN-Based Carbon Fiber. Carbon Fibers. Broad Base. Best Solutions.
The PAN-Based Carbon Fiber Carbon Fibers Broad Base. Best Solutions. Carbon Fibers & Composite Materials Unique Integrated Value Chain We are SGL Group The Carbon Company, one of the worldwide leading
More informationEndumax an ultra-strong thin film with a high modulus
Endumax an ultra-strong thin film with a high modulus Contents What is Endumax? 3 How is Endumax produced? 4 What types of Endumax are available? 6 What can Endumax be used for? 8 Endumax a unique combination
More informationPolyamide 6 for Packaging and Film
Polyamide 6 for Packaging and Film Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization & Polymer Additivation NUREL s long term experience in polymerization processes and polymer
More informationEngineered Polypropylene Core. PP Honeycomb
Engineered Polypropylene Core PP Honeycomb Plascore PP Honeycomb Light, Strong, Tough, Cost-Effective Ref. -00 Ref. -20 Ref. -01 /-10 Ref. -30 Plascore PP Honeycomb is a tough, lightweight and ductile
More informationExperience Gained over a period of 25 years, from a single production line to a plant employing over 150 people.
CHEMISTRY BETWEEN US AIB is the pioneer in modern solutions in the construction industry. We started our company in 1992, focusing on the production of innovative finishing and insulation materials. Quality
More informationSECTION SAFETY AND SECURITY FILM. A. Section Steel Doors and Frames: New doors with glazing to receive film.
SECTION 08877 SAFETY AND SECURITY FILM PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security film field applied to existing glass. B. Safety and Security film factory applied to glazed surfaces. 1.2
More informationSECTION SAFETY AND SECURITY FILM. A. Section Steel Doors and Frames: New doors with glazing to receive film.
SECTION 08877 SAFETY AND SECURITY FILM PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security film field applied to existing glass. B. Safety and Security film factory applied to glazed surfaces. 1.2
More informationTECHNICAL DATA SHEET
QUICKSEAL MP 250 1. DESCRIPTION QuickSeal MP 250 is an instant curing flexible Waterproofing membrane that can be built to any thickness in one application. QuickSeal MP 250 is an economical alternative
More informationSpecifications for Concrete Embedment Liner
Specifications for Concrete Embedment Liner Part 1: GENERAL 1.01 SECTION INCLUDES A. Specifications and guidelines for MANUFACTURING high-density polyethylene embedment liners. 1.02 REFERENCES A. American
More informationCHEMFILM HIGH PERFORMANCE FILMS
CHEMFILM CHEMFILM HIGH PERFORMANCE FILMS High Performance Films Extruded Fluoropolymer Films Melt-processable fluoropolymers Broadest fluoropolymer film product line on the market Up to 60" wide webs,
More information3M Thermal Bonding Film 690
Technical Data May 2014 3M 690 Product Description 3M 690 is a flexible, light colored, thermoplastic adhesive bonding film which exhibits good adhesion to a variety of substrates. The bonding film is
More informationLimited Time. Job-Ready. Value Priced.
Available for a Limited Time save money vehicle wrap bundles Job-Ready. Value Priced. In this economy, sometimes you need a little help. That s why for a limited time Oracal USA is offering special value-priced
More informationAbcite 585 EF. Technical Data and Application Guide. Product description. Typical applications. Product range. Product certifications.
Product description is a single layer, primer-free, halogen-free, high strength adhesive thermoplastic powder coating which provides shattering protection for glass pieces and preserves the original glass
More information3 Bonding Film 583. Technical Data August, 2002
Technical Data August, 2002 Product Description 3M is a high strength, flexible, nitrile phenolic based thermoplastic bonding film. It can be heat or solvent activated for bonding. can also be lightly
More informationZhejiang Fotech International Co. Ltd. PTFE Molding Powder. Tensile strength (Mpa) Elongation at break %
PTFE Molding Powder FT 4TM FT 4TN S Appearance White powder, no impurities Tensile strength (Mpa) 36 35.0 Elongation at break % 320 320 Bulk density (g/l) 300 450 300 550 Average particle size (μm) 30±5
More informationGSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI. GRI Test Method GM21
Geosynthetic Institute 4 Kedron Avenue Folsom, PA 133-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 5: September 1, 2016 Revision schedule on pg. 11 GRI Test Method GM21
More informationAll types of NOMEX are sold in 610mm and 914mm roles (type 411) and in 4mm onwards wide strips.
NOMEX Aramid Paper Structure NOMEX paper is a synthetic paper, composed of short fibers (bars) and small binding fibrous particles (fibrins) from an aromatic polyamide (aramidic), a polymer which is high-temperature
More informationHYPERDESMO -ADY-E. One-component, transparent, glossy, aliphatic, elastic polyurethane liquid membrane. must be dry.
Page 1/5 One-component, transparent, glossy, aliphatic, elastic polyurethane liquid membrane. DESCRIPTION is a one-component polyurethane fluid which cures with the humidity in the atmosphere to produce
More informationSR 1710 inj / SD 7820 Epoxy system for infusion and injection processes
Page 1 / 5 SR 1710 inj / SD 7820 Epoxy system for infusion and injection processes Description Two components epoxy system Specially formulated with a low viscosity for RTM processes as injection, injection
More informationCo-extruded 3 Layer Films
Co-extruded 3 Layer Films INTRODUCING THE NEW GUNDLE SABS RANGE OF 3 LAYER CONSTRUCTION MEMBRANES Multi-layer co-extrusion has the following advantages: It has a cross-linking effect between the different
More information3 Bonding Film AF111 for Electronics Applications
Technical Data March, 2004 Product Description 3M AF111 is an epoxy, thermoset film adhesive developed for structural bonding of metals and high-strength plastic materials (epoxy and phenolic). AF111 must
More informationLecture 24 Fibre-reinforced composite materials
Lecture 24 Fibre-reinforced composite materials Fibre-reinforced composite materials Reference Text Higgins RA & Bolton, 2410. Materials for Engineers and Technicians, 5th ed, Butterworth Heinemann Section
More informationIntroduction to Aerospace Engineering
Introduction to Aerospace Engineering Lecture slides Challenge the future 1 Manufacturing aspects Metals & Composites Faculty of Aerospace Engineering 6-12-2011 Delft University of Technology Challenge
More informationProperty Unit Typical Value Test Method Density gm / cm ASTM-D-792 Melt Flow Index (190 C, 2.16
KALPENA INDUSTRIES LIMITED An ISO 9001:2008 company TECHNICAL DATA Kablo Sanayi ve Dış Ticaret Ltd. Şti Ambient Curable Polyethylene Compound For Insulation Of Low Voltage Power Cable With High Line Speed
More informationPRODUCT DATASHEET TENCATE 8020 RAPI-PLY PREPREG BENEFITS/FEATURES TYPICAL LAMINATE PROPERTIES. Tensile Strength RTD EN MPa 148 ksi
PRODUCT DESCRIPTION materials achieve excellent quality laminates from vacuum bag processing. resin is a new generation of toughened epoxy s offering an excellent balance of mechanical properties. The
More informationHIGH VOLTAGE ENGINEERING(FEEE6402) LECTURER-21
LECTURER-21 SOLID DIELECTRICS USED IN PRACTICE Solid insulating materials are used in all kinds of electrical circuits and devices to insulate one current carrying part from another when they operate at
More informationTenCate BT250E-6 PRODUCT DATA SHEET
DESCRIPTION TenCate s BT250E-6 resin system is a 121 C (250 F) cure epoxy with excellent strength and stiffness. It provides an outstanding surface finish under vacuum bag/oven cure. TenCate s BT250E-6
More informationPanel elements. Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements
Panel elements Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements Panel elements Products in this section Acrylic Glass Polycarbonate PET-G Sheet Material
More informationMediprene 500M. Transparent TPE Series
Mediprene 500M Transparent TPE Series CONTENTS INTRODUCTION KEY PROPERTIES RAW MATERIAL SELECTION TYPICAL APPLICATIONS COLOURED & TRANSPARENT COMPOUNDS GRADE TABLE PROCESSING CONTACTS INTRODUCTION The
More informationDuPont Hytrel. Hytrel Product Information. thermoplastic polyester elastomer. plastics.dupont.com
DuPont Hytrel thermoplastic polyester elastomer is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing
More information- EC 152 / W 152 HR / MR
Product survey Epoxy resin / epoxy hardener Elan-tech - EC 147 / W 147 epoxy resin / epoxy hardener Two component epoxy system, low viscosity allows a mixing ratio of 100/50 without essential changes of
More informationApplications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS
Applications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS Typical applications Game consoles Handles and grips for consumer applications Headphones
More information