NHU-PPS Resin Polyphenylene Sulfide Resin

Size: px
Start display at page:

Download "NHU-PPS Resin Polyphenylene Sulfide Resin"

Transcription

1 NHU-PPS Resin Polyphenylene Sulfide Resin NHU-PPS Resin is featuring narrow molecular weight distribution, low content of oligomer and stable properties. By adopting advanced automated polymerization and post-processing technology, NHU are manufacturing PPS of different grades with MFR ranging from In the meanwhile, NHU can provide various specifications encompassing linear, cross-linked and other grades. Application * Injection Molding Test Method MFR g/10min ISO /5kg Ash Content Wt% ISO ** Weight Loss% *** Volatile Conten% C c C C C Coating 10200S**** Magnetic Powder 11200F Low Chloride Fiber Alloy Extrusion Crosslink CL Content PPM BS EN Crystallization Temperature ISO C C C C/F-W C/F C/F C/F C/F C/F C/F C/F *The first number 1 3 indicates for linear structure, 2 indicates for cross-linked structure; 1 3 indicates the different process route. **300,1 hour,percentage points of weight loss ; ***300,1 hour,percentage points of weight loss; ****After screening,d50 shall be with the diameter around 10 micron. (The above data are the typical figures of the products, which can not be used for the acceptance standard..) The suffixal C indicates for compacted type, F indicates for powder type, S indicates for grinded and screened type, of which the three are only different on physical appearances. Final products will be affected by a wide variety of factors. The physical properties shown in the above table can not fully guarantee to meet the conditions for customers during application, in which case this can be only used for reference. Please refer to the relevant MSDS before using our products.

2 NHU-PPS Resin Polyphenylene Sulfide Resin Recommend Compound Process Condition Vacuum degree: 0.09MPa Screw speed: rpm Nozzle 3rd phase 2nd phase 1st phase Drying condition Recommend injection process condition hours Mold temperature Nozzle temperature th zone 3rd zone 2nd zone 1st zone Barrel temperature & Nozzle temperature change to hold Reserve 3~5 mm Hold stage Pressure and Time (Middle and fast) Injection stage Pressure and speed( High and fast ) 95 ~ 98% filled Moving direction of Screw Storing stage - Back pressure - Screw speed - Reserve Back pressure 4~5 Mpa Middle <5mm

3 NHU-PPA Resin Polyphthalamide Resin NHU-PPA Resin is a semicrystalline thermoplastic polyamide which is also a semi aromatic polyamide, commonly known as high temperature nylon. It is featured with polyamideclass high temperature nylon resin with high temperature distortion, excellent tenacity and frictional resistance. Featuring good melt flow rate, PPA resin boasts excellent injection molding processibility, acid, alkali and general chemical resistance as well as outstanding mechanical strength. Products title N600 N600HF N602 N200 N201 N100 Test Method Intrinsic Viscosity ISO 307 Bulk density kg/m ISO 1183 Glass transition temp ISO Melting Temp ISO Water content * % Ash Content% ISO The above mentioned specification is only part of the standard grades, and NHU is capable of providing customerized products to accommodate the market need. *:150,20 min,percentage point of weight loss. The above data are the typical figures of products which is not the deemed as the acceptance standard. Final products will be affected by a wide variety of factors. The physical properties shown in the above table can not fully guarantee to meet the conditions for customers during application, in which case this can be only used for reference. Please add the drying process and refer to relevant MSDS before using our products.

4 NHU-PPA Resin Polyphthalamide Resin Recommend Compound Process condition Vaccum degree: 0.09MPa Screw speed: rpm dehumidifying 120 C, 6-8hours, Moisture content <0.10% Nozzle 3rd phase 2nd phase 1st phase Drying condition Recommend injection process condition dehumidifying heat hours Mold temperature Nozzle temperature rd zone 2nd zone 1st zone Barrel temperature & Nozzle temperature change to hold Reserve 3~5 mm Hold stage Pressure and Time (Middle and fast) Injection stage Pressure and speed( High and fast ) 95 ~ 98% filled Moving direction of Screw Storing stage - Back pressure - Screw speed - Reserve Back pressure 4~5 Mpa Middle <5mm

5 NHU-PPS Resin Polyphenylene Sulfide Resin Fiber Extrusion Characteristic We are adopting advanced automated polymerization and post-processing technology, to stably producing and supplying PPS resin with excellent quality, outstanding properties, Our PPS resin is a linear polymer with high molecular weight, owns outstanding properties such as high temperature resistance, chemical and organic solvent resistance, non conducting, flame resistance, non-toxic, reliable performance and anti-adverse environment. It is used to produce high performance short Fiber, Monofilament, Plates and Rods etc. Applications PPS resin fiber grade can be used for spinning, the spun fiber can be used to make the specially functional filter material. Used for dust control and tail gas dedusting. Such as making filter bags of coal fired boiler, filter bags of waste incineration etc. Our PPS resin Extrusion grade can be used to produce Rods, Tubes, Plates, Blow molding products and small diameter wire and cable with PPS coating. Properties Application MFR g/10min Ash Content wt% * Weight Loss % Volatile ** Content % Test Method ISO kg ISO Fiber Extrusion Application method The fiber grade can process by the conventional spinning equipment to spin. The Extrusion grade can process by extrusion equipment such as twin-screw extruder to produce various shape, dimension Plates, Rods products. *: 150,1 hour,percentage points of weight loss; **: 300,1 hour,percentage points of weight loss. The above datas are the typical figures of the products, which can not be used for the acceptance standard. Final products will be affected by a wide variety of factors. The physical properties data shown in the table can not fully guarantee to apply to the use condition of customer, the customer should do the final judgment then quote. Please refer to the relevant MSDS before using our products.

6 NHU-PPS Resin Polyphenylene Sulfide Resin High fluidity Characteristic We are adopting advanced automated polymerization and post-processing technology, to stably producing and supplying excellent quality, outstanding properties PPS resin, Our PPS resin is a linear polymer with high molecular weight, owns outstanding properties such as high temperature resistance, chemical and organic solvent resistance, non conducting, flame resistance, non-toxic, reliable performance and anti-adverse environment, with the strong bonding force of metal. Applications Based on the excellent properties, NHU PPS Resin Coating grade can be used as coating material to make the inner/outer coating such as non-stick pan, machinery, chemical pipelines, reaction kettles and storage tanks etc. NHU PPS Resin magnetic powder grade can be compounding with the filler of rare earths material, magnetic powder, to make the high temperature resistance Magnetic plastic products. Properties Application MFR g/10min Ash Content wt% Weight Loss * % Volatile ** Content % Test Method ISO kg ISO Coating magnetic powder grade 10200S*** 11200F Application method PPS resin coating can process by below method, (1)Powdery form: electrostatic spraying, Fluidized bed dip-coating, thermal spraying etc. (2)To make to suspension liquid coating. PPS resin magnetic powder grade can compounding with magnetic powder to process by the conventional modification method to produce the Magnetic plastic compound. *: 150,1 hour,percentage points of weight loss; **: 300,1 hour,percentage points of weight loss; ***: After grinding and sieving, The diameter of D50 is about 10micron. The above datas are the typical figures of the products, which can not be used for the acceptance standard. Final products will be affected by a wide variety of factors. The physical properties data shown in the table can not fully guarantee to apply to the use condition of customer, the customer should do the final judgment then quote. Please refer to the relevant MSDS before using our products.

Ultra High Molecular Weight Polyethylene (UHMWPE)

Ultra High Molecular Weight Polyethylene (UHMWPE) Ultra High Molecular Weight Polyethylene (UHMWPE) UTEC is the trade name of the Ultra High Molecular Weight Polyethylene (UHMWPE) developed and produced by Braskem with its own catalyst and production

More information

Riteflex thermoplastic polyester elastomer Short Term Properties Brochure Riteflex

Riteflex thermoplastic polyester elastomer Short Term Properties Brochure Riteflex Riteflex thermoplastic polyester elastomer Short Term Properties Brochure Thermoplastic polyester elastomer Riteflex Thermoplastic polyester elastomer RF-4 Ticona A business of Celanese AG Riteflex Thermoplastic

More information

High Modulus Carbon Fibres in Super-Structural Compounds

High Modulus Carbon Fibres in Super-Structural Compounds High Modulus Carbon Fibres in Super-Structural Compounds As a matter of fact, even if composite properties guarantee the best answer to the most severe project requirements, many industrial products can

More information

Product and Properties Guide Alcryn fi MPR

Product and Properties Guide Alcryn fi MPR Advanced Polymer Alloys Product and Properties Guide Alcryn fi MPR What Is Alcryn MPR? Alcryn melt-processible rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer

More information

DuPont Engineering Polymers for High Performance Extrusion Solutions. October, 2005

DuPont Engineering Polymers for High Performance Extrusion Solutions. October, 2005 DuPont Engineering Polymers for High Performance Extrusion Solutions October, 2005 2 Legal Disclaimer The information and suggestions provided in this presentation are based on data believed to be reliable,

More information

Successfully Processing High Temperature Thermoplastics

Successfully Processing High Temperature Thermoplastics Successfully Processing High Temperature Thermoplastics Jim Kostakes Entec Polymers August 13, 2015 Page 2 What Are High Temperature Thermoplastics? These are thermoplastics that can be used in applications

More information

SINTERED WIRE MESH.

SINTERED WIRE MESH. SINTERED WIRE MESH www.sinteredfilter.org "Total filtration solution provider" For over 15 years, Boegger has been providing filtration solutions to a wide range of filtering industries where air, liquid

More information

POLYMER ADDITIVES ADDITIVES FOR POLYAMIDES

POLYMER ADDITIVES ADDITIVES FOR POLYAMIDES POLYMER ADDITIVES ADDITIVES FOR POLYAMIDES PRODUCT INNOVATIONS TARGETED TO CUSTOMER DEMANDS BrüggemannChemical continuously develops speciality additives in response to the requirements of the market.

More information

Abcite 585 EF. Technical Data and Application Guide. Product description. Typical applications. Product range. Product certifications.

Abcite 585 EF. Technical Data and Application Guide. Product description. Typical applications. Product range. Product certifications. Product description is a single layer, primer-free, halogen-free, high strength adhesive thermoplastic powder coating which provides shattering protection for glass pieces and preserves the original glass

More information

Focus on: FEP. Fluoropolymers. FEP in the fluoropolymer family.

Focus on: FEP. Fluoropolymers. FEP in the fluoropolymer family. TECHNICAL WHITEPAPER ocus on: EP Introduction Continuing our series of looking at the members of the fluoropolymer family in detail, this month we focus on EP (fluoroethylene-propylene). EP is a copolymer

More information

TORLON Polyamide-Imide Processing and Curing

TORLON Polyamide-Imide Processing and Curing TORLON Polyamide-Imide Processing and Curing TORLON Processing OVERVIEW Resin preparation Mold design Machine settings Processing temperatures Regrind Curing Machining Post machining curing General Processing

More information

Fluoropolymers in Healthcare

Fluoropolymers in Healthcare Fluoropolymers in Healthcare Daikin Overview Daikin America, Inc. Is A Wholly Owned Subsidiary of Daikin Industries, Ltd. Headquartered in Osaka, Japan. Fluorochemical Based Business Focusing On Air Conditioning

More information

Halar ECTFE. Ethylene-Chlorotrifluoroethylene Typical properties

Halar ECTFE. Ethylene-Chlorotrifluoroethylene Typical properties Halar ECTFE Ethylene-Chlorotrifluoroethylene Typical properties Halar ECTFE A unique combination of properties Halar ECTFE is a melt-processable fluoropolymer manufactured by Solvay Solexis in Orange,

More information

INTRODUCTION. Table 1. Typical applications for LDPE and Ateva EVA copolymers. Category Typical Applications Advantages

INTRODUCTION. Table 1. Typical applications for LDPE and Ateva EVA copolymers. Category Typical Applications Advantages INTRODUCTION Low-density polyethylene is produced through the polymerization of ethylene by a high-pressure process. Ateva EVA copolymers are produced but copolymerizing ethylene (E) with vinyl acetate

More information

Product Capacity of HDPE plant

Product Capacity of HDPE plant HDPE Products Product Capacity of HDPE plant GRADES PROPERTY UNIT MFR (190 C/2.16 kg) (g/10 min). g/l ASTM METHOD D 1238 ISO 1183 INTERNAL METHOD 17066 1. INJECTION MOLDING HC 7260 HC 7260 * HD 7255 HD

More information

Product Innovations Targeted to Customer Demands

Product Innovations Targeted to Customer Demands polymer additives Product Innovations Targeted to Customer Demands BrüggemannChemical continuously develops speciality additives in response to the requirements of the market. More than 30 years experience

More information

Products Capacity of HDPE plant

Products Capacity of HDPE plant HDPE Products Products Capacity of HDPE plant PROPERTY MFR (190 C/5 kg) Density 1. INJECTION MOLDING GRADES UNIT (g/10 min). g/cm 3 ASTM METHOD INTERNAL METHOD D 1238 17066 ISO 1183 HC 7260 for transport

More information

PARALOID EXL 2314 Impact Modifier

PARALOID EXL 2314 Impact Modifier Technical Data Sheet PARALOID EXL 2314 Impact Modifier Weatherable Impact Modifier For Engineering Resins Regional Product Availability Introduction North America Japan/Korea Asia Europe PARALOID EXL 2314

More information

Contents. 1. Introduction to Materials Processing Starting Materials 21. Acknowledgements

Contents. 1. Introduction to Materials Processing Starting Materials 21. Acknowledgements Preface Acknowledgements xiii xv 1. Introduction to Materials Processing 1 1.1 Materials Processing: Definition and Scope 1 1.2 Three Approaches to Materials Processing 4 1.3 Materials Processing Steps

More information

Introduction to SkyPURA

Introduction to SkyPURA Introduction to SkyPURA 2015. 6. Contents [Session #1] [Session #2] [Session #3] [Session #4] [Session #5] Introduction to SkyPURA (PCT) LED applications EP applications V-0 Flammability, Physical Properties

More information

Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center

Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement Dr. Heinz Zhang Product R&D Center Overview 1 Fiberglass Reinforced Thermoplastic Composites 2 PA & Fiberglass Reinforced

More information

Magnesium hydroxide [Mg(OH)2] Application Data Sheet for Ethylene-Vinyl Acetate copolymer (EVA)

Magnesium hydroxide [Mg(OH)2] Application Data Sheet for Ethylene-Vinyl Acetate copolymer (EVA) FR-20 Magnesium hydroxide [Mg(OH)2] Application Data Sheet for Ethylene-Vinyl Acetate copolymer (EVA) FR-20, a series of high purity grades magnesium hydroxide, is offered by ICL-IP as inorganic halogen-free

More information

www.reedychemicalfoam.com FOAMS 2016 Kinetic Nucleators maximize cell distribution in foam extrusion September 14-15, 2016 2 1. Why Use Chemical Foam? 2. CFA types 3. Modern CFA Expectations 4. Nucleation

More information

Stanyl ForTii F11. Recommendations for injection molding MATERIAL HANDLING

Stanyl ForTii F11. Recommendations for injection molding MATERIAL HANDLING GRADE CODING Stanyl ForTii TM glass fiber reinforced and halogen-free flame retardant injection molding grades. MATERIAL HANDLING Storage In order to prevent moisture pick up and contamination, supplied

More information

AN ELECTROSTATIC POWDER SPRAY PROCESS FOR MANUFACTURING POLYPHTHALAMIDE HIGH PERFORMANCE COMPOSITE

AN ELECTROSTATIC POWDER SPRAY PROCESS FOR MANUFACTURING POLYPHTHALAMIDE HIGH PERFORMANCE COMPOSITE AN ELECTROSTATIC POWDER SPRAY PROCESS FOR MANUFACTURING POLYPHTHALAMIDE HIGH PERFORMANCE COMPOSITE Chiara Zaniboni 1, Paolo Ermanni 2 1 Centre of Structure Technologies, ETH Zurich, Leonhardstrasse 27,

More information

Solef & Hylar PVDF. Polyvinylidene fluoride Typical properties

Solef & Hylar PVDF. Polyvinylidene fluoride Typical properties Solef & Hylar PVDF Polyvinylidene fluoride Typical properties Solef and Hylar PVDF A remarkable combination of properties PVDF is a fluorinated semicrystalline thermoplastic which is obtained by polymerizing

More information

Roboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY

Roboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze one THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze The only Beltless 3D printer with a real 25 micron layer Roboze 2 Beltless Roboze Technology New stainless steel extruder

More information

MILITARY SPECIFICATION. PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)

MILITARY SPECIFICATION. PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK) 20 June l984 1. SCOPE MILITARY SPECIFICATION PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK) This specification is approved for use by all Departments and Agencies of the Department

More information

3M Advanced Materials Division 3M TM. Boron Nitride Cooling Fillers Smart Coolness for Excellent Performance

3M Advanced Materials Division 3M TM. Boron Nitride Cooling Fillers Smart Coolness for Excellent Performance 3M Advanced Materials Division Boron Nitride Cooling Fillers Smart Coolness for Excellent Performance 2 Boron Nitride Cooling Fillers 3M Advanced Materials Division Highly thermally conductive and electrically

More information

Highly effective antioxidants for Polyamides: Unique set-up of properties:

Highly effective antioxidants for Polyamides: Unique set-up of properties: polymer additives High Performance Additives for Polyamides And other Engineering Thermoplastics BRUGGOLEN H Heat Stabilizers Copper based antioxidants Most efficient heat stabilization of Polyamides Classic

More information

Performance and productivity.

Performance and productivity. Product Comparison Guide 3M Dynamar Polymer Processing Additives Performance and productivity. Proven technology from 3M, engineered for a smoother extrusion process from start to finish. Improve processing

More information

How properties of thermoplastics are affected by processing.

How properties of thermoplastics are affected by processing. How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation

More information

VALUE ADDED PRODUCTS FROM RECYCLED PET BOTTLES

VALUE ADDED PRODUCTS FROM RECYCLED PET BOTTLES VALUE ADDED PRODUCTS FROM RECYCLED PET BOTTLES WASTE PET BOTTLES CLEAN PET FLAKES SHEET & FILM FOR PACKAGING NON FOOD BOTTLES STRAPPING TAPE RECYCLED PSF / POY / DTY RECYCLED PET RESIN PELLETS BLENDING

More information

Product Safety Assessment TYRIN Chlorinated Polyethylene

Product Safety Assessment TYRIN Chlorinated Polyethylene Product Safety Assessment TYRIN Chlorinated Polyethylene Select a Topic: Names Product Overview Manufacture of Product Product Description Product Uses Exposure Potential Health Information Environmental

More information

SCREW & BARREL METALLURGY & SERVICE LIFE. Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd.

SCREW & BARREL METALLURGY & SERVICE LIFE. Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd. SCREW & BARREL METALLURGY & SERVICE LIFE Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd. 1 Topics of Discussion Current Requirements Screw & Barrel Wear Types of Wear Screw & Barrel

More information

Thermal Spray Solutions, Inc. presents the following offering for

Thermal Spray Solutions, Inc. presents the following offering for Thermal Spray Solutions, Inc. presents the following offering for Background Thermal Spray Solutions, a sister company of New Age Fastening Systems, was formed in 2003 and recently became incorporated

More information

WHITE PAPER THE EFFECTS OF PROCESSING ON THERMOPLASTICS QUADRANT S SHAPE DATA APPROACH. Find us

WHITE PAPER THE EFFECTS OF PROCESSING ON THERMOPLASTICS QUADRANT S SHAPE DATA APPROACH. Find us WHITE PAPER QUADRANT S SHAPE DATA APPROACH THE EFFECTS OF PROCESSING ON THERMOPLASTICS NA: 800-366-0300 EU: 49[0] 2564 3010 Find us online @quadrantepp PAGE 2 THE EFFECTS OF PROCESSING ON THERMOPLASTICS

More information

HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER

HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER HIGH PERFORMANCE LINING FOR BULK MATERIAL HOPPER That generally cohesive bulk materials do not flow easily in chutes and hoppers. Changes in moisture and particle size affect the products flowability.

More information

TECHNICAL DATA SHEET GRIVORY HTV-4X1 NATURAL

TECHNICAL DATA SHEET GRIVORY HTV-4X1 NATURAL TECHNICAL DATA SHEET GRIVORY HTV-4X1 NATURAL Product description Grivory HTV-4X1 natural is a 40% glass-fibre reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic

More information

Supplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA

Supplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA Report No. 51A REINFORCED PLASTICS Supplement A by WING SIEN FONG October 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................

More information

Super Structural Plastics Continue to Push the Frontier of Metal Replacement. Hyundai Fair June 27-29, 2006

Super Structural Plastics Continue to Push the Frontier of Metal Replacement. Hyundai Fair June 27-29, 2006 Super Structural Plastics Continue to Push the Frontier of Metal Replacement Hyundai Fair June 27-29, 2006 Super Structural Plastics Continue to Push the Frontier of Metal Replacement AGENDA Brief history

More information

material information 1

material information 1 material information 1 PTE PURE, virginal NUE 1 Polytetrafluoroethylene PTE is a polymerisate of tetrafluoroethylene. It is a partially crystalline fluorinated plastic with the highest level of fluorination.

More information

Fyrolflex RDP. Visit us at and

Fyrolflex RDP. Visit us at  and Fyrolflex RDP Chemical Name: Resorcinol bis(diphenyl phosphate) CAS #: 125997-21-9 Overview Fyrolflex RDP, an oligomeric phosphate ester flame retardant, is designed for use in engineering resin applications

More information

TECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability

TECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The

More information

Daikin Polyflon PTFE Products

Daikin Polyflon PTFE Products Positively Innovative Daikin Polyflon PTFE Products Product Information Guide for Aqueous Dispersions Fine Powders Granular Molding Powders Daikin America, Inc. / www.daikin-america.com / 845-365-9500

More information

Voluntary Design Guidelines for Designated PET Bottles Appendix 1: Material Evaluation Criteria for Bottles (including Handles)

Voluntary Design Guidelines for Designated PET Bottles Appendix 1: Material Evaluation Criteria for Bottles (including Handles) Voluntary Design Guidelines for Designated PET Bottles Appendix 1: Material Evaluation Criteria for Bottles (including Handles) Revised on March 1, 2016 The Council for PET Bottle Recycling (JAPAN) Table

More information

1/31/ Plastics Processing. Thermoplastics (Tampere)

1/31/ Plastics Processing. Thermoplastics (Tampere) 1/31/2012 1 Plastics Processing Thermoplastics (Tampere) 1/31/2012 2 Plastics processing Micro-scale melt processing Small Scale Processing Pilot Scale Processing Injection Moulding Extrusion Pre- and

More information

Investigation of Fusion Bonded Epoxy (FBE), as a Protective Coating for Pipes

Investigation of Fusion Bonded Epoxy (FBE), as a Protective Coating for Pipes Investigation of Fusion Bonded Epoxy (FBE), as a Protective Coating for Pipes H. E. Fathabadi M. Sc. Safety and Technical Inspection Engineering Petroleum University of Technology (PUT) *Corresponding

More information

STRENGTH+ High Modulus Carbon Fiber Reinforced LNP. High performance compounds for structural healthcare applications

STRENGTH+ High Modulus Carbon Fiber Reinforced LNP. High performance compounds for structural healthcare applications STRENGTH+ Stiffness High Modulus Carbon Fiber Reinforced LNP THERMOCOMP and LUBRICOMP Compounds High performance compounds for structural healthcare applications SABIC Founded in 1976, SABIC is today the

More information

RILSAN POLYAMIDE FAMILY AN EXTREME WORLD NEEDS EXTREME MATERIALS

RILSAN POLYAMIDE FAMILY AN EXTREME WORLD NEEDS EXTREME MATERIALS RILSAN POLYAMIDE FAMILY AN EXTREME WORLD NEEDS EXTREME MATERIALS POLYAMIDE PORTFOLIO 2 POLYAMIDE PORTFOLIO Ultra high performance PA 11 resins, alloys and ready-touse powder coatings. Tremendous toughness

More information

Features Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity

Features Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity Properties and Part Selection Overview Selection Table - Epoxy-Based Adhesive Properties Features Conductive Room Temperature Cure Product Ref 120 132 4461IP 42IP 438 700 Properties High electrical conductivity

More information

DATA SHEET A5000 RELEASE FILM

DATA SHEET A5000 RELEASE FILM A5000 RELEASE FILM HAWKEYE A5000 RELEASE FILM is a high temperature release film which lends itself readily to overcome bridging in contour layups. With more elongation than the HK3760 or nylon films,

More information

MANUFACTURING PROCESSES PREPREGS

MANUFACTURING PROCESSES PREPREGS PREPREGS Prepregging The reinforcement (carbon, fiberglass or aramid fiber or cloth) is saturated by dipping through the liquid resin. In an alternate method called a Hot Melt Process the resin is impregnated

More information

Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene):

Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene): Polypropylene (PP) Technical University of Gabrovo Milena Koleva General General Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene): Its molecular mass

More information

Solution Vinyl Resin

Solution Vinyl Resin Solution Vinyl Resin Solution Vinyl Resin Vinisol resins are high performance soluble vinyl polymers that can be used alone or in combination with other polymers, including acrylics, urethanes, alkyds

More information

Texin RxT70A. Characterization

Texin RxT70A. Characterization Characterization Properties / Applications Medical Applications Texin RxT70A resin is an aromatic polyether-based thermoplastic polyurethane. It can be processed by injection molding or extrusion. Texin

More information

Metal Matrix Composite (MMC)

Metal Matrix Composite (MMC) Matrix Metal Matrix Composite (MMC) The matrix is the monolithic material into which the reinforcement is embedded, and is completely continuous. This means thatt there is apath throughh the matrix ti

More information

JONCRYL ADR POLYMERIC CHAIN EXTENDER FOR CONDENSATION THERMOPLASTICS General Information. Key Features & Benefits

JONCRYL ADR POLYMERIC CHAIN EXTENDER FOR CONDENSATION THERMOPLASTICS General Information. Key Features & Benefits JONCRYL Key Features & Benefits Increased IV and Mw of polyesters Upgrades recycled PET and PA Upgrades quality of PET and polyesters Enhanced hydrolytic stability of PET, PC POLYMERIC CHAIN EXTENDER FOR

More information

SILICONE RUBBER GUM HTV (HCE) RTV FSR LSR. OH Polymer. SiSiB SILICONES. A part of PCC group.

SILICONE RUBBER GUM HTV (HCE) RTV FSR LSR. OH Polymer. SiSiB SILICONES. A part of PCC group. SILICONE RUBBER GUM RTV HTV (HCE) LSR FSR OH Polymer SiSiB SILICONES A part of PCC group. Nanjing SiSiB Silicones Co., Ltd. FSR Silicates SiSiB SILICONES, a part of PCC group, is one of the leading manufacturers

More information

FEED ENHANCEMENT TECHNOLOGY FOR LOW BULK DENSITY MATERIAL INTO CO-ROTATING TWIN-SCREW COMPOUNDING EXTRUDERS

FEED ENHANCEMENT TECHNOLOGY FOR LOW BULK DENSITY MATERIAL INTO CO-ROTATING TWIN-SCREW COMPOUNDING EXTRUDERS FEED ENHANCEMENT TECHNOLOGY FOR LOW BULK DENSITY MATERIAL INTO CO-ROTATING TWIN-SCREW COMPOUNDING EXTRUDERS Paul G. Andersen, Coperion Corporation, Ramsey, NJ Maria Hoelzel and Thorsten Stirner, Coperion

More information

ICS ; Supersedes CEN/TS 14541:2007. English Version

ICS ; Supersedes CEN/TS 14541:2007. English Version TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14541 May 2013 ICS 23.040.20; 23.040.45 Supersedes CEN/TS 14541:2007 English Version Plastics pipes and fittings - Characteristics

More information

Polymers. Historical Classification

Polymers. Historical Classification Polymers The term polymer implies many "mers" or the building blocks...similar to the unit cell in metals. A polymer is a chemical compound or mixture of compounds formed by a process called polymerization,

More information

Ingeo Biopolymer 3D860 Technical Data Sheet 3D Printing Monofilament High Heat and Impact Grade

Ingeo Biopolymer 3D860 Technical Data Sheet 3D Printing Monofilament High Heat and Impact Grade 3D Printing Monofilament High Heat and Impact Grade Monofilament Applications Ingeo 3D860 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heatresistance and

More information

FIVE STAR PRODUCTS, INC. (800)

FIVE STAR PRODUCTS, INC.  (800) FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART

More information

Recycling and Disposal of Thermoset Composites Steve Pickering University of Nottingham

Recycling and Disposal of Thermoset Composites Steve Pickering University of Nottingham Recycling and Disposal of Thermoset Composites Steve Pickering University of Nottingham Workshop on Life Cycle Assessment (LCA) for Composites, Composites Gateway 25 th September 2013, Dartington Hall.

More information

zahnrad_neu_gb :46 Uhr Seite 1 Gear Pumps

zahnrad_neu_gb :46 Uhr Seite 1 Gear Pumps Gear Pumps Kreyenborg Gear Pumps - An Addition to our Range The best guarantee for continuous and economic machine performance is a closed loop system with well-matched units. The Kreyenborg system, right

More information

Makrolon 2205 and 2207

Makrolon 2205 and 2207 Makrolon 2205 and 2207 Polycarbonate (PC) General purpose grades Low viscosity Injection molding Short description Makrolon 2205: Global grade; MVR (300 C/1.2 kg) 35 cm³/10 min; general purpose; low viscosity;

More information

ULTRAMID VISION The first semi-transparent polyamide VISION

ULTRAMID VISION The first semi-transparent polyamide VISION 2 ULTRAMID VISION ION VISION ULTRAMID VISION 3 THE FIRST SEMI-TRANSPARENT POLYAMIDE Thanks to their high chemical resistance and heat resistance, semi-crystalline engineering thermoplastics can be used

More information

Military Specifications

Military Specifications Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C *MIL-P-997C MIL-P-997D Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset

More information

DuPont Superstructural Web Seminar

DuPont Superstructural Web Seminar DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT February 28, 2006 DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT The information and

More information

RESOPAL -Decorative High Pressure Laminates HPL according to EN 438

RESOPAL -Decorative High Pressure Laminates HPL according to EN 438 Product Data Sheet RESOPAL -Decorative High Pressure Laminates HPL according to EN 438 This information describes the composition of RESOPAL -HPL and gives advice for their handling, processing, use, and

More information

Military Specifications

Military Specifications Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine

More information

1. 3 Extrusion molding

1. 3 Extrusion molding 1. 3 Extrusion molding 9 Extrusion is a widely used technique, both in the field of traditional and technical ceramics. This method allows the continuous manufacture of products with a constant cross-

More information

MASTERBATCHES. Masterbatch Application and Selection Guide for Irrigation Pipes

MASTERBATCHES. Masterbatch Application and Selection Guide for Irrigation Pipes MASTERBATCHES Masterbatch Application and Selection Guide for Irrigation Pipes Table of contents Page Nr Introduction 2 Definitions 3 Key Performance Requirements of Irrigation Pipes 3 Drip Irrigation

More information

Abcite X45. Technical Data and Application Guide. Product description. Typical applications. Product range. Product certifications.

Abcite X45. Technical Data and Application Guide. Product description. Typical applications. Product range. Product certifications. Product description is a single layer, primer-free, halogen-free, high strength adhesive thermoplastic powder coating which provides excellent and durable corrosion protection to steel and other metals.

More information

An Engineer s Guide to Specify the Right Thermoplastic

An Engineer s Guide to Specify the Right Thermoplastic AGENDA An Engineer s Guide to Specify the Right Thermoplastic Steve Maki Vice President Technology smaki@rtpcompany.com 1. Define Compounding 2. Plastic Resin Selection Process 3. Application Case Studies

More information

TECHNYL A 218 V35 BLACK 21N

TECHNYL A 218 V35 BLACK 21N TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal

More information

TECHNICAL DATA SHEET GRILON TS V0

TECHNICAL DATA SHEET GRILON TS V0 TECHNICAL DATA SHEET GRILON TS V0 General product description Grilon TS V0 is an unreinforced, normal viscosity, self-extinguishing PA66 + PA6 injection moulding grade. Grilon TS V0 has the following important

More information

Aqua Clear Aqua Clear multi-lobal cross section of individual filaments has more micro-voids giving higher dirt holding capacity and lower resistance

Aqua Clear Aqua Clear multi-lobal cross section of individual filaments has more micro-voids giving higher dirt holding capacity and lower resistance Aqua Clear STRING-WOUND FILTER CARTRIDGES Free of extractables No leaching Twice the life of conventional cartridges Made from continuous filaments No media migration % Polypropylene Wide chemical compatibility

More information

+91-8048410776 Sant Engineering Industries http://www.santengineeringindustries.co.in/ Established in the year 1966, we, Sant Engineering Industries, are the manufacturer and exporter of Extrusion, Plastic

More information

DuPont Performance Polymers

DuPont Performance Polymers DuPont Performance Polymers THE INDUSTRY S BROADEST PORTFOLIO OF RENEWABLY SOURCED MATERIALS UNIQUE MATERIAL SOLUTIONS MEET TODAY S SUSTAINABILITY CHALLENGE By tapping innovative technology and strategic

More information

Development of Advanced Structural Foam Injection Molding. Kye Kim. A thesis submitted in partial fulfillment of the requirements for the degree of

Development of Advanced Structural Foam Injection Molding. Kye Kim. A thesis submitted in partial fulfillment of the requirements for the degree of Development of Advanced Structural Foam Injection Molding Kye Kim A thesis submitted in partial fulfillment of the requirements for the degree of BACHELOR OF APPLIED SCIENCE Supervisor: Park, C.B. Department

More information

High Performance Plastics for Wind Turbine Engineering

High Performance Plastics for Wind Turbine Engineering High Performance Plastics for Wind Turbine Engineering 05/2010 Thermoplastics Fiber reinforced plastics Röchling world leader in engineering plastics Your international supplier of technical products As

More information

PARALOID EXL-2690 IMPACT MODIFIER

PARALOID EXL-2690 IMPACT MODIFIER Technical Data Sheet EXL-269 IMPACT MODIFIER For Polycarbonate and Polycarbonate Blends Regional Availability Asia Pacific EMEA North America Description EXL-269 Impact Modifier is a methyl methacrylate-butadiene-styrene

More information

PLASTICIZING SCREWS AND BARRELS. Brixiaplast brand

PLASTICIZING SCREWS AND BARRELS. Brixiaplast brand Brixiaplast brand PLASTICIZING SCREWS AND BARRELS PLASTICIZING SCREWS AND BARRELS We want to approach the plasticizing business as a partner, not only as a supplier. BRIXIAPLAST designs and produces all

More information

SUCCIPACK Development of active, intelligent and sustainable food PACKaging using Polybutylenesuccinate

SUCCIPACK Development of active, intelligent and sustainable food PACKaging using Polybutylenesuccinate Page 1 / 13 SUCCIPACK Development of active, intelligent and sustainable food PACKaging using Polybutylenesuccinate Project co-funded by the European Commission within the Seventh Framework Programme (2007-2013)

More information

High Performance Plastics for the Chemical Processing Industry

High Performance Plastics for the Chemical Processing Industry High Performance Plastics for the Chemical Processing Industry 8/2017 Thermoplastics Areas of application Steel pickling Plants Over the last two decades, polypropylenes have become a more common solution

More information

MiniLab-Compounder and Reactor

MiniLab-Compounder and Reactor MiniLab-Compounder and Reactor Georgius Isaakides, Dr. A. Frendel, J. Bouton Thermo Haake, Dieselstrasse 4, D-76771 Karlsruhe, Germany Jacques.bouton@thermorheo.com Presented on PPS-17, Montreal Abstract

More information

AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA

AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA COMPOUNDS FOR METAL REPLACEMENT AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA AKRO-PLASTIC GmbH Member of the Feddersen Group Meeting Your Requirements For decades, polyamides have formed the leading group

More information

Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology

Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology Process considerations to achieve optimum weld strengths of Wood Plastics Composites using advanced Vibration Welding technology Michael J. Johnston, Dukane Corporation As the uses for Wood Plastic Composites

More information

For the purpose of this rule, the following definitions shall apply: 3.1 APCO: as defined in Rule 1020 (Definitions).

For the purpose of this rule, the following definitions shall apply: 3.1 APCO: as defined in Rule 1020 (Definitions). RULE 4682 POLYSTYRENE, POLYETHYLENE, AND POLYPROPYLENE PRODUCTS MANUFACTURING (Adopted May 21, 1992; Amended December 17, 1992; Amended June 16, 1994; Amended September 20, 2007; Amended December 15, 2011)

More information

Polymer Composites Filled with RB Ceramics Particles as Low Friction and High Wear Resistant Filler

Polymer Composites Filled with RB Ceramics Particles as Low Friction and High Wear Resistant Filler Tribology Online, 5, 1 (21) 19-26. ISSN 1881-2198 DOI 1.2474/trol.5.19 Article Polymer Composites Filled with RB Ceramics Particles as Low Friction and High Wear Resistant Filler Motoharu Akiyama 1), Takeshi

More information

Ultradur (PBT) Product Range. Ultradur in the web:

Ultradur (PBT) Product Range. Ultradur in the web: Ultradur (PBT) Product Range Ultradur in the web: www.ultradur.de Ultradur (PBT ) Ultradur is BASF s trade name for its line of partially crystalline saturated polyesters. This line is based on polybutylene

More information

BLOW MOULDING. Blow moulding is a process used to produce hollow objects from thermoplastic.

BLOW MOULDING. Blow moulding is a process used to produce hollow objects from thermoplastic. 1 BLOW MOULDING Blow moulding is a process used to produce hollow objects from thermoplastic. The basic blow moulding process has two fundamental phases. First, a parison (or a preform) of hot plastic

More information

Woodpulp fibres as reinforcements for high-melting engineering thermoplastics for under-the-hood automotive applications

Woodpulp fibres as reinforcements for high-melting engineering thermoplastics for under-the-hood automotive applications Woodpulp fibres as reinforcements for high-melting engineering thermoplastics for under-the-hood automotive applications Daniel F. Caulfield (1), and Rodney E. Jacobson (1), Karl D. Sears, (2) and John

More information

Stress-Strain Behavior

Stress-Strain Behavior 15-1 CHAPTER 15 CHARACTERISTICS, APPLICATIONS, AND PROCESSING OF POLYMERS PROBLEM SOLUTIONS Stress-Strain Behavior which is 15.1 From Figure 15.3, the elastic modulus is the slope in the elastic linear

More information

DOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST.

DOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST. DOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST. 1 A business unit of DOMO Chemicals THE STRENGTH OF CHEMICALS Private family owned business > Long term vision Back up integrated into the entire Nylon

More information

DuPont Zytel HTN51G50HSL BK083 (Preliminary Data)

DuPont Zytel HTN51G50HSL BK083 (Preliminary Data) PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,

More information

Dispersing at its best. TEGOMER Dispersants for Masterbatches and Compounds

Dispersing at its best. TEGOMER Dispersants for Masterbatches and Compounds Dispersing at its best TEGOMER Dispersants for Masterbatches and Compounds World Masterbatch Demand in 2009 and Distribution ~ 2.5 Mio t/a Demand NAFTA Demand Asia without Japan 700 600 500 400 300 200

More information

HOSTAFORM C 9021 GV1/30 POM Glass Reinforced

HOSTAFORM C 9021 GV1/30 POM Glass Reinforced Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance

More information