Calcined and Reactive Aluminas for Refractories
|
|
|
- Matilda Park
- 6 years ago
- Views:
Transcription
1 European Regional Product Data Calcined and Reactive Aluminas for Refractories Think alumina, think Almatis. RP-EU/RCP/007/R08/0812/MSDS 387/1000
![Calcined Aluminas for Refractories unground CT 19 CT 800 Properties / method Unit typical Min Max typical Min Max typical Min Max typical Min Max Specific Surface Area / BET [m 2 /g] 0.40 0.20 0.45 0.](/docs-images/78/78032885/images/2-0.jpg "70 0.65 0.85 Particle Size / sieve > 63 µm [%] 70.0 50.0 95.0 70.0 50.0 95.0 Al 2 O 3 [%] 99.8 99.7 Na 2 O [%] 0.08 0.10 0.12 0.15 Fe 2 O 3 [%] 0.02 0.04 0.02 0.04 SiO 2 [%] 0.01 0.05 0.01 0.03 CaO [%] 0.")
![03 0.05 0.02 0.06 ground CT 9 G Specific Surface Area / BET [m 2 /g] 0.70 Particle Size / sieve > 63 µm [%] 1.0 3.0 Al 2 O 3 [%] 99.5 Na 2 O [%] 0.15 0.30 Fe 2 O 3 [%] 0.04 0.06 SiO 2 [%] 0.03 0.06 CaO [%] 0.](/docs-images/78/78032885/images/2-1.jpg "02 fineground CT 9 FG CT 19 FG CT 800 FG Specific Surface Area / BET [m 2 /g] 0.80 0.60 0.40 0.80 0.90 0.70 1.20 Particle Size / D50 Cilas [µm] 5.0 2.0 7.0 5.5 4.0 7.5 3.5 2.5 5.")
2 Calcined Aluminas for Refractories unground CT 19 CT 800 Properties / method Unit typical Min Max typical Min Max typical Min Max typical Min Max Specific Surface Area / BET [m 2 /g] Particle Size / sieve > 63 µm [%] Al 2 O 3 [%] Na 2 O [%] Fe 2 O 3 [%] SiO 2 [%] CaO [%] ground CT 9 G Specific Surface Area / BET [m 2 /g] 0.70 Particle Size / sieve > 63 µm [%] Al 2 O 3 [%] 99.5 Na 2 O [%] Fe 2 O 3 [%] SiO 2 [%] CaO [%] 0.02 fineground CT 9 FG CT 19 FG CT 800 FG Specific Surface Area / BET [m 2 /g] Particle Size / D50 Cilas [µm] Particle Size/wet sieve > 45 µm [%] Fe 2 O 3 [%] SiO 2 [%] superground CT 800 SG CT 10 SG Specific Surface Area / BET [m 2 /g] Particle Size / D50 Cilas [µm] Particle Size / Cilas > 20 µm [%] Fe 2 O 3 [%] SiO 2 [%] Na 2 O [%] µm CT 19 2µm CT 19 FG page 02 of 06 RP-EU/RCP/007/R08/0812/MSDS 387/1000
![Reactive Aluminas for High Performance Refractories RG 4000 CTC 20 CTC 22 CL 370 Properties / method Unit typical Min. Max. typical Min. Max. typical Min. Max. typical Min. Max. Specific Surface Area / BET [m 2 /g] 7.](/docs-images/78/78032885/images/3-0.jpg "2 6.0 9.5 2.1 1.5 3.0 2.7 2.0 3.5 3.0 2.6 3.4 Particle Size / D50 Cilas [µm] 0.6 0.4 0.8 1.8 1.4 2.3 1.9 1.4 2.4 2.5 1.8 3.0 Particle Size / D90 Cilas [µm] 3.0 4.0 4.5 6.0 5.8 3.9 6.")
![3 7.0 5.0 10.0 Grain Size Distribution monomodal monomodal bimodal bimodal Al 2 O 3 [%] 99.8 99.7 99.7 99.7 Na 2 O [%] 0.08 0.10 0.12 0.20 0.12 0.20 0.10 0.14 Fe 2 O 3 [%] 0.](/docs-images/78/78032885/images/3-1.jpg "02 0.04 0.03 0.05 0.03 0.05 0.03 0.04 SiO 2 [%] 0.03 0.08 0.03 0.08 0.03 0.08 0.03 0.07 CaO [%] 0.02 0.02 0.02 0.02 Physical Properties Green Density / 90 MPa [g/cm 3 ] 2.18 2.")
![40 2.60 Fired Density at 1600 C/1h [g/cm 3 ] 3.83 3.20 3.40 The typical product properties are based upon the actual averages from production data.](/docs-images/78/78032885/images/3-2.jpg "The min-max data show our standard product specification data for these products. 2µm RG 4000 2µm CTC 20 2µm CL 370 page 03 of 06 RP-EU/RCP/007/R08/0812/MSDS 387/1000")
3 Reactive Aluminas for High Performance Refractories RG 4000 CTC 20 CTC 22 CL 370 Properties / method Unit typical Min. Max. typical Min. Max. typical Min. Max. typical Min. Max. Specific Surface Area / BET [m 2 /g] Particle Size / D50 Cilas [µm] Particle Size / D90 Cilas [µm] Grain Size Distribution monomodal monomodal bimodal bimodal Al 2 O 3 [%] Na 2 O [%] Fe 2 O 3 [%] SiO 2 [%] CaO [%] Physical Properties Green Density / 90 MPa [g/cm 3 ] Fired Density at 1600 C/1h [g/cm 3 ] The typical product properties are based upon the actual averages from production data. The min-max data show our standard product specification data for these products. 2µm RG µm CTC 20 2µm CL 370 page 03 of 06 RP-EU/RCP/007/R08/0812/MSDS 387/1000
![9 1.6 1.3 1.8 Particle Size / D90 Cilas [µm] 5.0 4.0 6.0 5.5 4.7 6.8 7.5 6.0 9.0 7.5 6.0 8.5 Grain Size Distribution multimodal bimodal multimodal multimodal Al 2 O 3 [%] 99.8 99.8 99.8 91.](/docs-images/78/78032885/images/4-1.jpg "0 Na 2 O [%] 0.08 0.12 0.08 0.12 0.16 0.20 0.10 0.20 Fe 2 O 3 [%] 0.02 0.03 0.03 0.05 0.08 0.12 SiO 2 [%] 0.03 0.07 0.03 0.07 0.03 0.10 0.05 0.10 CaO [%] 0.02 0.03 0.03 0.10 MgO [%] 0.04 0.03 8.00 7.")
![30 9.30 Physical Properties Green Density / 90 MPa [g/cm 3 ] 2.55 2.36 2.60 2.50 Fired Density at 1600 C/1h [g/cm 3 ] 3.45 3.60 3.](/docs-images/78/78032885/images/4-2.jpg "60 3.40 The typical product properties are based upon the actual averages from production data. The min-max data show our standard product specification data for these products.")
4 Almatis European Regional Product Data Reactive Aluminas for High Performance Refractories CTC 30 CTC 40 CTC 50 CTC 55* Properties / method Unit typical min. max. typical min. max. typical min. max. typical min. max. Specific Surface Area / BET [m 2 /g] Particle Size / D50 Cilas [µm] Particle Size / D90 Cilas [µm] Grain Size Distribution multimodal bimodal multimodal multimodal Al 2 O 3 [%] Na 2 O [%] Fe 2 O 3 [%] SiO 2 [%] CaO [%] MgO [%] Physical Properties Green Density / 90 MPa [g/cm 3 ] Fired Density at 1600 C/1h [g/cm 3 ] The typical product properties are based upon the actual averages from production data. The min-max data show our standard product specification data for these products. * CTC 55 is a Reactive Alumina/Spinel (MSDS 1000) 2µm CTC 30 2µm CTC 40 2µm CTC 50 page 04 of 06 RP-EU/RCP/007/R08/0812/MSDS 387/1000
5 Calcined Aluminas for Refractories Due to the excellent high temperature properties of -Alumina, Calcined Aluminas are used in many refractory applications, both in monolithic and shaped products. Product Performance Depending on the degree of milling and crystal size, Calcined Aluminas serve a variety of different functions in refractory formulations. Most important are: Upgrade product performance by increasing overall Alumina content of these formulations using natural raw materials in order to improve refractoriness and mechanical properties. Improve particle packing by increasing the amount of fine particles resulting in better mechanical strength and abrasion resistance. Form a matrix of high refractoriness and good thermal shock resistance by reacting with binder components like Calcium Aluminate Cement and / or clays. Reactive Aluminas for High Performance Refractories The fully ground reactive aluminas are specially designed for the production of high performance refractories, where defined particle packing, rheology and consistent placement characteristics are as important as superior physical properties of the final product. Product Performance The highly controlled fine particle size distribution down to the sub-micron range and their excellent sintering reactivity give Reactive Aluminas unique functions in refractory formulations. Most important are: Reduce mixing water of monolithic refractories by helping to optimize particle packing. Increase abrasion resistance and mechanical strength by the formation of strong ceramic bonds. Increase high temperature mechanical performance by substitution of other superfine materials of lower refractoriness. page 05 of 06 RP-EU/RCP/007/R08/0812/MSDS 387/1000
6 Almatis European Regional Product Data Calcined and Reactive Aluminas for Refractories Contacts for sales, technical information and application assistance Almatis GmbH Lyoner Straße Frankfurt/Germany Phone Fax info@almatis.com Almatis GmbH Giulinistrasse Ludwigshafen Germany Phone Fax Almatis B.V. Theemsweg KM Botlek RT The Netherlands Phone Fax MSDS 387 MSDS 1000 Almatis do Brasil Ltda. Avenida Jose de Souza Campos, Andar Cambuí Campinas, SP Brasil Phone Fax RP-EU/RCP/007/R08/0812/MSDS 387/1000 Page 06 of 06
Calcium Aluminate Cements
Global Product Data Calcium Aluminate Cements Think alumina, think Almatis. GP-RCP/005/R08/0516/SDS 993 Products Almatis produces high purity Calcium Aluminate Cements with 70 and 80 % Al 2 O 3 content.
PREMIUM ALUMINA FOR POLISHING APPLICATIONS
PREMIUM ALUMINA FOR POLISHING APPLICATIONS Sales Office ALUMINA FOR POLISHING Application Lab Plant Refinery Almatis The Premium Alumina Company Almatis Burnside, Inc., Burnside, Louisiana, USA Bauxite
THE PREMIUM ALUMINA COMPANY
THE PREMIUM ALUMINA COMPANY Think alumina, think Almatis. MISSION STATEMENT The Almatis mission is to be the world s leading supplier of premium alumina for the refractory, ceramic and polishing industries.
Review of Matrix Aluminas for Refractory Formulations
2-B2-9 Review of Matrix Aluminas for Refractory Formulations Rainer Kockegey-Lorenz*, Andreas Buhr Almatis GmbH, Ludwigshafen/Frankfurt, Germany Dale Zacherl Almatis Inc., Leetsdale, USA Bin Long Qingdao
INTERCERAM REFRACTORIES MANUAL II/2014. Review PaPeRs
INTERCERAM REFRACTORIES MANUAL II/2014 281 M. Schnabel 1, A. Buhr 1, R. Kockegey-Lorenz 2, D. Schmidtmeier 2, J. Dutton 3 Benefit of Matrix Alumina and Modern Dispersing Systems in Low Cement Castables
PREMIUM ALUMINA FOR REFRACTORY APPLICATIONS
PREMIUM ALUMINA FOR REFRACTORY APPLICATIONS Sales Office ALUMINA FOR REFRACTORIES Application Lab Plant Refinery Almatis The Premium Alumina Company Almatis Burnside, Inc., Burnside, Louisiana, USA Bauxite
PREMIUM ALUMINA FOR CERAMIC APPLICATIONS
PREMIUM ALUMINA FOR CERAMIC APPLICATIONS Sales Office Application Lab Plant Refinery Almatis The Premium Alumina Company Almatis Burnside, Inc., Burnside, Louisiana, USA Bauxite Burnside Leetsdale + Neville
Comparison of Silica-sol and Low Cement Bonded Tabular Alumina and Spinel Castables
Comparison of Silica-sol and Low Cement Bonded Tabular Alumina and Spinel Castables TIAN Zhongkai 1 *, LONG Bin 1, ZHOU Yunpeng 1, ZHANG Lanyin 1, KLAUS Sebastian 2, BUHR Andreas 2 1 Qingdao Almatis Co.
Specialty Alumina positioned for growth?
Barbara Steuler Specialty Alumina positioned for growth? Barbara Steuler, Almatis Specialty Alumina in higher-performance applications Specialty alumina s positioned for growth? Demand Driver and Regional
Specialty Aluminas Refractory applications
Specialty Aluminas 0 Specialty Aluminas at a Glance World s largest supplier of Specialty Aluminas with 750,000 tonnes of alumina based products (hydrate, aluminas and fused) Headquartered in Gardanne
Improvement of Refractory Castables with an Innovative Calcium Aluminate Binder System
Improvement of Refractory Castables with an Innovative Calcium Aluminate Binder System N.Kreuels, Calucem GmbH Mannheim, Germany, Doug Ostrander, Robert Stacy, Calucem Inc. Allentown, P.A. The Story, we
2 Rheology of suspensions. 2.1 Impact of solid content, particle size and particle size distribution
Rheology of High Performance Alumina and Spinel Castables M. Schnabel, A. Buhr, J. Dutton The article provides a basic understanding of the impact of the matrix components on the rheology of castables
Issuing Date 06-Feb-2012 Revision Date 12-Oct-2017 Revision Number 22. Adsorbents, Filler, Polishing agent, Refractory, Ceramic
SAFETY DATA SHEET Issuing Date 06-Feb-2012 Revision Date 12-Oct-2017 Revision Number 22 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Code 387
Dense Refractories Product Data
High Property Tabular Alumina Castables Refractory GT-20 GT-20 Max service temp.( C) 1800 Bulk density(g/cm 3 ) 2.95 Typical Min Max Al 2O 3 94.59 94 CaO 1.44 2.0 Fe 2O 3 0.06 0.2 110 C 24h 78.4 1100 C
Table of Contents. Chapter 1 Designing refractory castables. Chapter 2 Fundamentals on particle dispersion. Foreword
Table of Contents F.I.R.E. Foreword Preface xiii xv xvii Chapter 1 Designing refractory castables 1. Introduction 1 2. Refractory castables features 3 3. Book content overview 10 3.1. Fundamentals on particle
QUICK DRYING CASTABLES BASED UPON 80% ALUMINA CEMENTS
Page : 1/11 QUICK DRYING CASTABLES BASED UPON 80% ALUMINA CEMENTS C. Parr*, C. Alt, J.M. Auvray, H. Fryda, Ch. Wöhrmeyer Kerneos SA, Paris, France Presented at 46 th Symposium on Refractories, Saint Louis,
CACSAND. high performance calcium aluminate aggregate. Special aggregate for your high performance applications!
CACSAND high performance calcium aluminate aggregate Special aggregate for your high performance applications! Çimsa CACSAND Calcium Aluminate Tailor Made for High Performance Applications www.cimsa.com.tr
VALUE ENHANCEMENT THROUGH ENGINEERED ALUMINA PRODUCTS FOR MONOLITHIC AND BRICK APPLICATIONS
VALUE ENHANCEMENT THROUGH ENGINEERED ALUMINA PRODUCTS FOR MONOLITHIC AND BRICK APPLICATIONS Andreas Buhr, Almatis GmbH, Germany Abstract The German steel institute VDEh organises international seminars
THE INFLUENCE OF CEMENT DOSAGE ON THE QUALITY PERFORMANCES OF SPECIAL REFRACTORY CONCRETES
THE INFLUENCE OF CEMENT DOSAGE ON THE QUALITY PERFORMANCES OF SPECIAL REFRACTORY CONCRETES Nicolae ANGELESCU, Cristina IONIŢĂ VALAHIA University of Targoviste, # 2, Carol I Blvd., Code 130024, Targoviste,
MINERALOGICAL STUDY AND PROPERTIES OF MAGNESIA REFRACTORIES DERIVED FROM EVIAN MAGNESITE
ελτίο της Ελληνικής Γεωλογικής Εταιρίας τοµ. XXXVI, 2004 Πρακτικά 10 ου ιεθνούς Συνεδρίου, Θεσ/νίκη Απρίλιος 2004 Bulletin of the Geological Society of Greece vol. XXXVI, 2004 Proceedings of the 10 th
NEW ALUMINATE BINDERS AND SYSTEMS FOR REFRACTORY MONOLITHICS
Reference : TP-GB-RE-LAF-8 Page : 1/11 NEW ALUMINATE BINDERS AND SYSTEMS FOR REFRACTORY MONOLITHICS C. Parr*, J.M. Auvray, H. Fryda, Ch. Wöhrmeyer Kerneos SA, Paris, France Presented at 8 th India International
SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION. Page 1 / 6
SAFETY DATA SHEET Issuing Date 29-Mar-2011 Revision Date 07-Mar-2018 Revision Number 12 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Code 340
www.alteo-alumina.com Technical features Glazes A ceramic glaze is a vitreous material prepared from the milling of two types of constituents: mineral raw materials (non soluble in water) frits The frit/raw
Most castables and gun mixes. Better Refractories through NANOTECHNOLOGY
SPECIAL FOCUS REFRACTORIES A robot applies the colloidal silica bonded shotcrete material to a blast furnace. Better Refractories through NANOTECHNOLOGY by Michael Anderson, Senior Research Engineer, Magneco/
Aging behaviour of Alphabond and Calcium Aluminate Cement bonded castables
Aging behaviour of Alphabond and Calcium Aluminate Cement bonded castables Dagmar Gierisch*, Andreas Buhr, Jerry Dutton Almatis GmbH, Ludwigshafen, Germany Margarete Hösler, Brunhilde Franz RHI Urmitz
INCORPORATION OF ALUMINUM-RICH SALT SALG IN BAUXITIC-TYPE REFRACTORIES. 193 Aveiro, Portugal
INCORPORATION OF ALUMINUM-RICH SALT SALG IN BAUXITIC-TYPE REFRACTORIES D.A. Pereira 1, J.A. Labrincha 2 1 Mechanical Engineering Dept., ISEP, 4200 Porto, Portugal 2 Ceramics and Glass Engineering Dept.,
Energy Saving Measures in. Cement Industry
CH2356 Energy Engineering Energy Saving Measures in Cement Industry Dr. M. Subramanian Associate Professor Department of Chemical Engineering Sri Sivasubramaniya Nadar College of Engineering Kalavakkam
CEMENT HYDRATION AND STRENGTH DEVELOPMENT HOW CAN REPRODUCIBLE RESULTS BE ACHIEVED?
CEMENT HYDRATION AND STRENGTH DEVELOPMENT HOW CAN REPRODUCIBLE RESULTS BE ACHIEVED? Schmidtmeier, Dagmar*; Buhr, Andreas, all Almatis GmbH, Germany Wams, Geert; Kuiper, Stefan, Almatis B.V., The Netherlands
Issuing Date 24-Mar-2011 Revision Date 07-Mar-2018 Revision Number 16. Aluminum filter, Heat exchanger, Inert bed support, Refractory
SAFETY DATA SHEET Issuing Date 24-Mar-2011 Revision Date 07-Mar-2018 Revision Number 16 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Code 154
Pozzolanic Activity of Recycled Red Ceramic Bricks
Pozzolanic Activity of Recycled Red Ceramic Bricks Igor S. Pinheiro, Luiz C. Montenegro, and Adriana G. Gumieri School of Engineering; Federal University of Minas Gerais, Rua Espírito Santo, 35, Belo Horizonte,
Global Innovation for your High Temp World
Foundry Refractories Global Innovation for your High Temp World Mission Statement Division of Fedmet Resources Corporation: We serve our clients in the high temp world by providing profitable solutions
Blast-furnace-slag binders by one-part ( just add water ) alkali activation. September 27 th Dr. Tero Luukkonen
Blast-furnace-slag binders by one-part ( just add water ) alkali activation September 27 th Dr. Tero Luukkonen GEOBIZ BUSINESS FROM GEOPOLYMERS Potential applications JUST ADD WATER GEOPOLYMERS DURABLE
Chemical Activation of Low Calcium Fly Ash Part 1: Identification of Suitable Activators and their Dosage
Chemical Activation of Low Calcium Fly Ash Part 1: Identification of Suitable Activators and their Dosage P. Arjunan 1, M. R. Silsbee 2, and D. M. Roy 2, 1 Custom Building Products, 6515, Salt Lake Ave,
Proceeding 232 THE VALUE OF ADDITIVES IN REFRACTORY CASTABLES CASTABLES WITHOUT SILICA FUME
Proceeding 232 THE VALUE OF ADDITIVES IN REFRACTORY CASTABLES CASTABLES WITHOUT SILICA FUME Rainer Kockegey-Lorenz, Andreas Buhr, Dagmar Schmidtmeier, Almatis GmbH, Frankfurt/Ludwigshafen, Germany Zhongkai
NEW COARSE TABULAR AGGREGATES FOR IMPROVED CASTABLES
NEW COARSE TABULAR AGGREGATES FOR IMPROVED CASTABLES Dale P. Zacherl*, Almatis Inc. Leetsdale, Pennsylvania, USA Marion Schnabel, Andreas Buhr, Dagmar Schmidtmeier, Almatis Frankfurt/Ludwigshafen, Germany
Quality Properties of Multi-Component Blended Binder High Fluidity Concrete for CO 2 Reduction
Quality Properties of Multi-Component Blended Binder High Fluidity Concrete for CO 2 Reduction *Yong-Jic Kim 1), Jun-Hee Jo 2) and Young-Jin Kim 3) 1), 2) Civil Engineering Research Team, Daewoo E&C, Suwon
Utilization of micro silica as partial replacement of OPC & SRC in concrete
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 3, Issue 3(March 2014), PP.67-73 Utilization of micro silica as partial replacement of
STRENGTH PROPERTIES OF GEOPOLYMER MORTAR CONTAINING BINARY AND TERNARY BLENDS OF BENTONITE
STRENGTH PROPERTIES OF GEOPOLYMER MORTAR CONTAINING BINARY AND TERNARY BLENDS OF BENTONITE K. Srinivasan and A. Sivakumar Structural Engineering Division, VIT University, Vellore, Tamil Nadu, India E-Mail:
Mullite Formation A myth or Reality?
Mullite Formation A myth or Reality? Dilip Jain Virginia, U.S.A St Louis Section Meeting of the American Ceramic Society March 29, 2007 It is very well known that when ever there is a source of free silica
CEMENT MANUFACTURING PROCESS
CEMENT MANUFACTURING PROCESS Definition: Defined as a product material obtained by calcination of calcareous (a material containing lime) and argillaceous (a material which contain silica) materials. According
General Stabilization Methods
Soil Stabilization General Stabilization Methods Mechanical Stabilization Compaction Geosynthetics Embankment Stabilization Chemical Treatment Soil Modification (low doses) Soil Stabilization (high doses)
Utilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production
Utilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production Mustafa Ziypak, Zeki Olgun, Mustafa Turan, Julide Erdogan, Yasemin Kilic, Aylin Sahin, Mustafa Kara
by Dimitris E. Tsakonitis (Refractory Business Unit Manager, GRECIAN MAGNESITE S.A Polygyros, GREECE)
Presentation 20/06/2000 MAGNESIA FOR REFRACTORY APPLICATIONS by Dimitris E. Tsakonitis (Refractory Business Unit Manager, GRECIAN MAGNESITE S.A. 631 00 Polygyros, GREECE) 1. MAGNESIA Magnesia or Magnesium
SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION. Page 1 / 7
SAFETY DATA SHEET Issuing Date 28-Mar-2011 Revision Date 12-Oct-2017 Revision Number 14 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Code 993
Our products have been developed for the special operating. Our services. Our solutions
in cement industry A d va n c e d refractories technology Our products have been developed for the special operating conditions required in the cement manufacturing process. Nowadays, more and more alternative
Laboratory Investigations of the Electrical Resistivity of Cokes and Smelting Charge for Optimizing Operation in Large Ferrochrome Furnaces
Southern African Pyrometallurgy 2006, Edited by R.T. Jones, South African Institute of Mining and Metallurgy, Johannesburg, 5-8 March 2006 Laboratory Investigations of the Electrical Resistivity of Cokes
EFFECTS OF LIGHTWEIGHT MULLITE-SILICA RICH GLASS COMPOSITE AGGREGATES ON PROPERTIES OF CASTABLES
Original papers EFFECTS OF LIGHTWEIGHT MULLITE-SILICA RICH GLASS COMPOSITE AGGREGATES ON PROPERTIES OF CASTABLES YUANYUAN LI, # NAN LI, WEN YAN The Key State Laboratory Breeding Base of Refractories and
IMPROVEMENT OF CONCRETE DURABILITY BY COMPLEX MINERAL SUPER-FINE POWDER
277 IMPROVEMENT OF CONCRETE DURABILITY BY COMPLEX MINERAL SUPER-FINE POWDER Chen Han-bin, Chen Jian-xiong, Xiao Fei, and Cui Hong-ta College of Material Science, Chongqing University, Chongqing, PRC Abstract
SINTER BASICITY INCREASE THROUGH INSERTION OF MAGNESIUM SILICATE MINILUMPS BY ALBA FERNÁNDEZ, PAMELA DIAZ, ESTEBAN RUISÁNCHEZ, JAVIER MARTÍNEZ *
SINTER BASICITY INCREASE THROUGH INSERTION OF MAGNESIUM SILICATE MINILUMPS BY ALBA FERNÁNDEZ, PAMELA DIAZ, ESTEBAN RUISÁNCHEZ, JAVIER MARTÍNEZ * SYPNOPSIS PASEK Dunite is an ultramaphic rock with a basic
High Thermal Conductivity Silicon Nitride Ceramics
Journal of the Korean Ceramic Society Vol. 49, No. 4, pp. 380~384, 2012. http://dx.doi.org/10.4191/kcers.2012.49.4.380 Review High Thermal Conductivity Silicon Nitride Ceramics Kiyoshi Hirao, You Zhou,
Technical Paper NEW STRONGER BONDS FOR MONOLITHIC CASTABLES THROUGH SURFACE REACTIVE CALCIUM ALUMINATE AGGREGATES
Page : 1/9 NEW STRONGER BONDS FOR MONOLITHIC CASTABLES THROUGH SURFACE REACTIVE CALCIUM ALUMINATE AGGREGATES C. Wöhrmeyer, C. Parr, H. Fryda, E. Frier Kerneos GmbH, Oberhausen, Germany, www.kerneos.com
A STUDY ON THE PERFORMANCE OF DEEP LAYER SUBGRADE STABILIZATION
Research Experience for Undergraduates at UNC Charlotte Sean Windt Civil and Environmental Engineering Department A STUDY ON THE PERFORMANCE OF DEEP LAYER SUBGRADE STABILIZATION CONTENTS INTRODUCTION LITERATURE
THE INFLUENCE OF TRIETANOLAMINE (TEA) ON CHARACTERISTICS OF FRESH AND HARDENED MORTARS CONTAINING LIMESTONE POWDER
NATURA MONTENEGRINA, Podgorica, 9(3):867-881 THE INFLUENCE OF TRIETANOLAMINE (TEA) ON CHARACTERISTICS OF FRESH AND HARDENED MORTARS CONTAINING LIMESTONE POWDER Jozefita MARKU*, Vaso KOZETA**, Caja SHQIPONJA
Fly Ash, Slag, Silica Fume, and Natural Pozzolans
Silica Fume, and Fly Ash, Slag, Silica Fume, and Also known as Supplementary Cementing Materials (SCMs) a material that, when used in conjunction with portland cement, contributes to the properties of
MgO SiO 2 H 2 O bonded MgO castables
MgO SiO 2 H 2 O bonded MgO castables Part 1: Effect on flow, set and hot properties when substituting microsilica with alumina in pumpable MgO based castables. Cecilie Ødegård, Zhiqiang Chen, Bjørn Myhre,
THE REFRACTORIES INDUSTRY WORLDWIDE
THE REFRACTORIES INDUSTRY WORLDWIDE 2012-2017 (published March 2013) TABLE OF CONTENTS PAGE 1 EXECUTIVE SUMMARY... 1 1.1 Raw materials supply and demand... 1 1.2 Refractories supply... 2 1.3 Demand drivers
Optimisation of Blended Cements Performances by the use of Grinding Aids
Optimisation of Blended Cements Performances by the use of Grinding Aids Matteo Magistri 1, Davide Padovani 1, Paolo Forni 1 1 Mapei SpA, Milan, Italy Abstract The use of mineral additions such as limestone,
CHAPTER 3 PROPERTIES OF MATERIALS
59 CHAPTER 3 PROPERTIES OF MATERIALS Concrete is made up of cement, fine aggregate (sand), coarse aggregate (stone chips) and water. It is important to know the properties of constituent materials, as
Quality improvers for optimization of blended cements performances P.D Arcangelo 1, S.Bhome 2, M.Magistri 1
Quality improvers for optimization of blended cements performances P.D Arcangelo 1, S.Bhome 2, M.Magistri 1 1 Mapei SpA, Milan, Italy 2 IBS - Innovative Building Solutions LLC, Dubai, UAE Abstract The
Waste Acid Recycling Technology by Slag
Technical Report NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 109 JULY 2015 Waste Acid Recycling Technology by Slag UDC 669. 184. 28 : 621. 794. 48 Shigeharu MATSUBAYASHI* Abstract In this study,
THEORETICAL AND EXPERIMENTAL STUDIES UPON TO USE OF FLY ASH AS RAW MATERIAL IN CEMENT MANUFACTURING PROCESS
1 2 THEORETICAL AND EXPERIMENTAL STUDIES UPON TO USE OF FLY ASH AS RAW MATERIAL IN CEMENT MANUFACTURING PROCESS BOUCHAIR Abdulhamid 1, ALIC Carmen 2, HUNTINGDON Mathieu 1 1 UNIVERSITÉ BLAISE PASCAL CLERMONT-FERRAND
International Journal of Advance Research in Engineering, Science & Technology
Impact Factor (SJIF): 5.301 International Journal of Advance Research in Engineering, Science & Technology e-issn: 2393-9877, p-issn: 2394-2444 Volume 5, Issue 4, April-2018 Effect of Waste Kota Stone
Quality Blanks direct from the Manufacturer
Mechanical Applications Division Quality Blanks direct from the Manufacturer Expanded range of colors for translucent zirconium oxide On a long term basis, high quality is the basic requirement to become
ZYBF. High Temperature Yttria Stabilized Zirconia Fibers. Advanced Fibrous Ceramics
Advanced Fibrous Ceramics ZYBF High Temperature Yttria Stabilized Zirconia Fibers The Unrivaled Industry Leader of ZrO 2 Insulation Three Product Types ZYBF-1 (7.5 pcf) ZYBF-2 (21 pcf) ZYBF-5 (16 pcf)
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF FAST FIRED CLINKER TILES BASED ON WIERZBKA I RAW MATERIAL
DOI: 10.1515/adms 2016 0002 M. Gajek 1, A. Rapacz-Kmita 1, M. Dudek 2, J. Partyka 1 1 AGH University of Science and Technology, Faculty of Material Science and Ceramics, Department of Ceramics and Refractories,
EVALUATION REPORT OF HESS PUMICE
EVALUATION REPORT OF HESS PUMICE June 11, 212 By Uma Ramasamy and Paul Tikalsky CONCRETE AND MATERIALS RESEARCH AND EVALUATION LABORATORY DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING 1 INTRODUCTION
Ceramic Biomaterials. Lecture #17
Ceramic Biomaterials Lecture #17 Ceramics Refractory (maintain shape and composition at high temperatures) Polycrystalline Nonductile virtually zero creep at room temperatures Usually inorganic Silicates
Correlation between mullite formation and mechanical properties of refractory castables at elevated temperatures
Correlation between mullite formation and mechanical properties of refractory castables at elevated temperatures Presented at VIII Int. Met. Conf., Ustron, Poland May 25-28, 1999 The fine art of Correlation
NIKOCHEM CORPORATION Touch the future. Together MAGNESIAL BUSINESS DEVELOPMENT
NIKOCHEM CORPORATION Touch the future. Together MAGNESIAL BUSINESS DEVELOPMENT About Nikochem Companies location Russian Federation. Volgograd. It s the most suitable place for Mg compounds production
Study On Application Of Alumina In High-Purity Andalusite Based Refractory
Journal of Minerals & Materials Characterization & Engineering, Vol. 3, No.2, pp 81-89, 2004 jmmce.org Printed in the USA. All rights reserved Study On Application Of Alumina In High-Purity Andalusite
true grit minerals CUMI lative range of EMD PRODUCT CATALOG 100 years US $ 3 billion 29 companies +30,000 people MURUGAPPA GROUP
MURUGAPPA GROUP 100 years US $ 3 billion 29 companies +30,000 people EMD ELECTRO MINERALS DIVISION CUMI lative range of true grit minerals PRODUCT CATALOG FUSED PRODUCTS MACRO REGULAR BROWN FUSED ALUMINA
Analysis of anhydrite gypsum effects on quality of cement
Analysis of anhydrite gypsum effects on quality of cement L.O.Onat 1, Kh.R.Valiyev 2, R.V. Agapov 3, L.M. Kangarli 4 1QA & QC Manager of NORM Cement Plant, Baku, Azerbaijan 2QA & QC Deputy Manager of NORM
Powder Metallurgy Products. From Ore To Powder, To Meet Your Requirements!
Powder Metallurgy Products From Ore To Powder, To Meet Your Requirements! Rio Tinto Metal Powders Powder Metallurgy Products Rio Tinto Metal Powders (RTMP, formerly QMP) is the only major powder producer
EDITORIAL REVISION March Process Industry Practices Refractory. PIP RFSM1000 Monolithic Refractory Material Specification
March 2013 Process Industry Practices Refractory PIP RFSM1000 Monolithic Refractory Material Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
Saint-Gobain Ceramic Materials
Saint-Gobain Ceramic Materials Saint Gobain SiC Membranes for Produced Water December 10th, 2014 Nathalie Elkhiati Fabiano Rodrigues Karen Dwyer Aberdeen Saint-Gobain Group Silicon Carbide Characteristics
Chapter 2 Portland Cement Clinker
Chapter Portland Cement Clinker.1 Portland Cement Clinker Burning The main goal of the clinkering process is to produce the material of designed phase composition, which is called Portland cement clinker.
Technical Presentation on Spent Pot lining Management & Red Mud
Technical Presentation on Spent Pot lining Management & Red Mud 0 Bharat Aluminium Company Ltd, Korba & Vedanta limited, Jharsuguda & Lanjigarh OUR PRESENCE 1 Jharsuguda Smelter Capacity 3,615 MW 1.75
Valorization of non-conventional fly ashes in eco-efficient cements
Valorization of non-conventional fly ashes in eco-efficient cements Moustapha Sow 1,2, Martin Cyr 1 and Nicolas Schmutz 2 1 LMDC, Université de Toulouse, Toulouse, France 2 SAS CICM, Le Port, Ile de la
EFFECTS ON SETTING, STRENGTH AND WATER RESISTANCE OF SOREL CEMENT ON MIXING FLY ASH AS AN ADDITIVE
Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 2, April, 2014 2014 IJMERR. All Rights Reserved EFFECTS ON SETTING, STRENGTH AND WATER RESISTANCE OF SOREL CEMENT ON MIXING FLY ASH AS AN ADDITIVE
The Effect on the Performance of Cement Grinding Aid Components
Journal of Materials, Processing and Design (2017) Vol. 1, Number 1 Clausius Scientific Press, Canada The Effect on the Performance of Cement Grinding Aid Components GUO Yan-mei1,a, SUN Shao-fei2,b,* 1.
Development of Lead Free Crystal Glass Using Silica Sand from Gong Belibis Setiu, Terengganu
Journal of Geological Resource and Engineering 3 (2016) 137-141 doi:10.17265/2328-2193/2016.03.004 D DAVID PUBLISHING Development of Lead Free Crystal Glass Using Silica Sand from Gong Belibis Setiu, Terengganu
The high calcium fly ash as a component of self-compacting concrete
Proceedings of the EUROCOALASH 2012 Conference, Thessaloniki Greece, September 25-27 2012 http:// www.evipar.org/ The high calcium fly ash as a component of self-compacting concrete Tomasz Ponikiewski
The effect of additives on Al 2 O 3 SiO 2 SiC C ramming monolithic refractories
MAHT 090263 The effect of additives on Al 2 O 3 SiO 2 SiC C ramming monolithic refractories E. Karamian, A. Monshi and S.M. Siadati* Department of Materials Engineering, Isfahan University of Technology
BZN* Compacts Tool Blanks and Inserts. Machining of Ferrous Materials
BZN* Tool Blanks and Inserts Machining of Ferrous Materials BZN* Tool Blanks and Inserts Diamond Innovations manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders
Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders Jing Yang, Tzu-Chieh Lin, Bill Manett, Jeremy Young, Dan Rooney Eugene Medvedovski SCI Engineered Materials,
EFFECT OF MICRON AND NANO MgAl 2 O 4 SPINEL ADDITION ON THE PROPERTIES OF MAGNESIA-CARBON REFRACTORIES
EFFECT OF MICRON AND NANO MgAl 2 O 4 SPINEL ADDITION ON THE PROPERTIES OF MAGNESIA-CARBON REFRACTORIES A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF Master of Technology
DYNAMIC FRAGMENTATION OF ALUMINA WITH ADDITIONS OF NIOBIA AND SILICA UNDER IMPACT
XXXX TB40 19th International Symposium of Ballistics, 7 11 May 2001, Interlaken, Switzerland DYNAMIC FRAGMENTATION OF ALUMINA WITH ADDITIONS OF NIOBIA AND SILICA UNDER IMPACT L.H.L. Louro1, A.V. Gomes1,
Application of Catalyst Waste to Ceramics Made of Raw Materials
ISSN 1392 1320 MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol. 11, No. 1. 2005 Application of Catalyst Waste to Ceramics Made of Raw Materials Olga KIZINIEVIČ 1, Ramunė ŽURAUSKIENĖ 1, Algis ŠPOKAUSKAS 2, Romualdas
Chapter 5: REACTION SINTERING of diamond and silicon powders
Chapter 5: REACTION SINTERING of diamond and silicon powders In this chapter are presented the results, discussion and conclusion on preparation of the diamond-silicon carbide composite by reaction sintering
NEW PRODUCTS COPPER INDUSTRY
NEW PRODUCTS FOR COPPER INDUSTRY AUGUST 2017 Page 1 of 5 Newly Developed Semi Re-bonded Magnesia-chrome brick for Copper Furnaces TRL SW HSR 1 and TRL SW HSR 2 are two new generation semi re-bonded magnesia
CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES INSULATING REFRACTORY CASTABLES...
CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES... 11 INSULATING REFRACTORY CASTABLES... 17 REFRACTORY GUNNING MIX... 20 ASBESTOS-FREE COATING... 23 REFRACTORY
INVESTIGATIONONS ON USE OF JAROSITE AS SET CONTROLLER IN CEMENT
INVESTIGATIONONS ON USE OF JAROSITE AS SET CONTROLLER IN CEMENT S K Agarwal, Puneet Sharma, Mithlesh Sharma and M M Ali National Council for Cement and Building Materials, Ballabgarh & B K Singh and Vikas
Effects of Cement Type and Fly Ash on the Sulfate Attack Using ASTM C 1012
Journal of the Korea Concrete Institute Vol.16 No.1, pp.13~138, February, 24 today s construction industry. Effects of Cement Type and Fly Ash on the Sulfate Attack Using ASTM C 112 Nam-Shik Ahn 1)* Dept.
EFFECTS OF ADDITIVES ON GYPSUM SLURRY BEHAVIOUR
EFFECTS OF ADDITIVES ON GYPSUM SLURRY BEHAVIOUR Teodora Tinkova University of Mining and Geology St. Ivan Rilski, Department of Mineral Processing and Recycling, 1700 Sofia, Bulgaria Abstract The implementation
Size and Dosage of Micro Silica Fume Behaviour for Partial replacement of Cement in Concrete
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 7-4,p-ISSN: 23-3X, Volume, Issue Ver. VI (Nov. - Dec. 15), PP -3 www.iosrjournals.org Size and Dosage of Micro Silica Fume Behaviour
Your ceramic-tooling partner for the front-end semiconductor industry
ew/company Profile 2005 4/4/05 9:59 AM Pagina 1 Schunk Semiconductor An international group of companies SCHUNK INGENIEURKERAMIK GmbH Hanns-Martin-Schleyer-Straße 5, 47877 Willich, Germany Tel.: +49 2154
CHAR REACTIVITY AND ITS IMPLICATIONS. *J.M. Steer, R. Marsh, M. Greenslade ECCRIA 2016
CHAR REACTIVITY AND ITS IMPLICATIONS FOR BLAST FURNACE COAL INJECTION *J.M. Steer, R. Marsh, M. Greenslade Cardiff University - School of Engineering ECCRIA 2016 Content Introduction Blast furnace coal
Magnesia-carbon refractories for the lining of gasification chambers: technical capabilities and limitations
Magnesia-carbon refractories for the lining of gasification chambers: technical capabilities and limitations M. Hampel*, P. Gehre, T. Schemmel, C.G. Aneziris 5th International Freiberg Conference on IGCC
THE POSSIBILITY OF USING HANDHELD XRF IN CEMENT APPLICATIONS
THE POSSIBILITY OF USING HANDHELD XRF IN CEMENT APPLICATIONS Dr. Michelle Cameron, Bruker Elemental, Kennewick, WA Denver X-ray Conference 2011 ABSTRACT Handheld XRF may become a useful and cost-saving