PTFE semi-finished products and finished parts

Size: px
Start display at page:

Download "PTFE semi-finished products and finished parts"

Transcription

1 Material characteristics PTFE = Polytetrafluorethylene PTFE is excellently suited as a construction material for the chemicals industry. It temperature resistance ranges from -190 C to +250 C, and it can temporarily sustain temperatures of +300 C. Because of its low friction coefficient, it is used as an anti-friction coating and lubrication material. Because of its particularly high insulation resistance and puncture resistance, it can also be used for insulation purposes. Another specific characteristic of PTFE is its extremely antiadhesive property. As a result of its non-stick effect, no substances adhere to PTFE surfaces. PTFE is non-flammable, does not absorb water and is physically harmless to humans. PTFE is considered to be a member of the thermoplastics group, although it is not suitable for injecting or pouring. PTFE is resistant to nearly all chemicals. It is only susceptible to chlorine trifluoride, elementary fluoride and melted alkali metals. Additionally, PTFE will not swell or dissolve in any common organic and inorganic solvent, even at high temperatures. It belongs to the group of weather-resistant plastics. Material types Standard types Material no Filler material none Coal Glass Bronze Graphite Filler material content [%] Please contact Kempchen to request materials with other filler materials and filler content. PTFE without filler material Pure PTFE is used for applications requiring high chemical resistance, strong anti-adhesive properties or very low friction values. PTFE without filler material may be unsatisfactory for certain areas of application. Unsatisfactory characteristics that may arise include a tendency to cold flow under pressure and relaxation at temperatures, the mechanical resistance and the low capacity for heat conduction. PTFE without filler is used for Bellows O-rings Enveloped gaskets* Steering floaters Spheres Back-up rings Construction parts * see section PTFE-enveloped gaskets PTFE-Compositions By combining pure PTFE with various filler materials, individual physical and mechanical properties can be positively influenced. It is important to consider that other properties may be negatively influenced in the process. The following are the primary results to be attained by using PTFE-types with filler material: Reduction of cold flow Increased regidity at high temperatures greater heat conduction greater abrasion resistance The main filler materials used are glass, coal, graphite and bronze. PTFE Glass Adding glass powder drastically reduces the tendency for cold flow in comparison to pure PTFE. This composition has shown superior performance in all types of applications, but particularly Valve rings Flat gaskets* Sealing cones Bearings V-ring packings * See the section PTFE enveloped gaskets PTFE Coal PTFE coal compound is characterised by a low abrasion and high stability. This composition is commonly used as a material for bearings, particularly at very low temperatures. The PTFE coal composition requires special caution when manufacturing moulding blanks for the machining of piston 237

2 rings, piston guide rings and piston rod packings. The construction of modern dry-running compressors would not be possible without these high-grade rings. Typical applications: Bearing bushings Piston rings Piston guide rings for dry-running compressors Rod packings V-ring packings PTFE Graphite When an exceptionally high level of absrasion resistance is required, PTFE graphite compositions are used. This material also has extremely low initial wear. The PTFE graphite composition is characterised by a very low friction coefficient in comparison with the PTFE coal composition. It must be emphasised that PTFE coal and graphite compositions are show particularly high resistance when used in chemical applications. Examples of applications: Shaft sealing Bearings Sliding plates Construction parts PTFE Bronze The PTFE bronze composition has the lowest tendency for cold flow of all the PTFE compositions. This composition is also characterised by a high capacity for heat conduction and superior abrasion resistance. PTFE bronze is therefore recommended as a bearings material in high-stress applications. This composition has limited suitability in chemical applications, as the bronze particles can be attacked and washed away under certain circumstances. PTFE bronze has been shown to be suitable for: Bearings Piston cuffs Guide rings for hydraulic cylinders Foil bearings Extruded hoses Hoses are manufactured on paste extruders using a special process. The finished lengths depend on the diameter and the thickness of the particular wall. Our product range includes hoses from 2 mm to 200 mm in inner diameter. Applications: Laboratory hoses Filler hoses Cladding for pipelines Steam hoses Hose pipes for adhesive media Electrical cable insulation PTFE foils Foils are cutted with a blade from a compact PTFE cylinders and subsequently turned over heated rollers in to release any existing tension. We supply foils up to 00 mm in width and 6 mm thick. Application areas for PTFE foils: Foil bearings All types of gaskets* Cladding for construction parts Compensators and bellows Cladding for chutes and containers Insulation for the electrical industry * See section PTFE-enveloped gaskets Adhesive PTFE foils Non pre-treated PTFE foils are not adhesive. Foils requiring adhesive properties are therefore prepared after cutting using a chemical finishing treatment for adhesion on one side to steel, plastic, wood, etc. The special adhesive required for pasting is available upon request. Adhesive foils are available at up to 00 mm in width and 3 mm thick. 238

3 PTFE V-ring packings V-ring packings are primarily used for sealing with axial movements. A complete set consists of several V-rings with one pressure and support ring each. Compounds with glass or coal are used at higher pressures due to the tendency for cold flow characteristic of PTFE without filler materials. At particularly high pressures, the packing is reinforced by installing V-rings, and pressure and support rings made from bronze or acid-resistant steel. In this configuration, one metal V-ring is installed in the packing after every or every other PTFE V-ring. PTFE wedge ring packings This robust and reliable packing is suitable for sealing valve shafts at high pressures and with abrasive media. The wedge rings are extruded inwards against the shafts and outward against the housing by the pressure of the stuffing box. The stuffing box follower can only be pre-stressed far enough to reliably seal the packing. It is important to note that PTFE without filler material is not suitable for the manufacture of piston rings. We strongly emphasise the importance of working with the proper PTFE composition in order to guarantee the optimal function of the piston rings. The following are application areas for piston and piston guide rings made from PTFE compositions: Dry-running compressors Cold compressors Pumps for abrasive fluids and fluids with poor lubrication Hydraulic and pneumatic cylinders Piston rings are designed with overlapping, diagonal or straight joints, depending on the application. O-rings For applications where the use of O-rings made from elastomers is not suitable whether as a result of chemical attack or excessive temperatures O-rings made of PTFE are used instead. Because of their low level of elasticity, these O rings are primarily used as static sealings. In order to achieve higher levels of elasticity, a is made around the circumference of the O-ring. The placement of the is aligned with the direction of the pressure. During assembling of the O-ring, the expanding is installed against the direction of pressure. We supply seamless O-rings up to approx. 500 mm in diameter. These are also available in a welded design. Piston rings and piston guide rings Today s industry is increasingly in need of compressors that guarantee lubricant-free gas-tight sealing. In applications requiring the compression of dry gases a compressor at high temperatures and piston speeds, equipping the plant with PTFE piston rings is the design engineer s only option. 239

4 without outer axial inner PTFE-enveloped O-rings PTFE enveloped O-rings unify the superior chemical resistance and low friction of PTFE and the elasticity of O-rings made from elastomers. We cover O-rings made from elastomer with a 0.4 mm thick PTFE envelope. The envelopes can be butted or overlapped The butts/overlaps are to be placed on the side turned away from the pressure. Because only the core, and not the envelope, of these special O-rings is elastic, a PTFE-enveloped O-ring may not be strongly expanded or squeezed. Depending on the application area, a material such as viton, hypalon, silicone, neoprene, perbunan or another elastomer may be selected for the O-ring. PTFE Support rings (Back-up rings) The task of the PTFE support ring is to back-up the constant gap between the pistons and the cylinder. The installation of support rings prevents the extrusion of the rubber O-rings into the sealing gap at axial movements to pressures over approx. 2.5 N/mm 2, leading to the destruction of the O- ring. Diameter Gauge diameter Installation dimension range D d B h , , , , , ,0 The advantages of installing support rings made from materials such as PTFE are as follows: butt inside outer overlapping downwards a) Chemical and thermal resistance b) Creation of a PTFE film on the bearing surface of the cylinder or piston, reducing the frictional factor of the O- ring c) Easy assembling easy disassembling butt outside butt frontal outer overlapping outer overlapping upwards d) Significantly longer life cycle of the O-ring. 240

5 Bellows The following bellow types have proven suitable in practice: Because of the great mechanical demands which may be required in individual cases, and the chemical resistance necessary, PTFE bellows are manufactured from special high-grade semi-finished products with total impermeability. prick pointed, type S: most elongation, low pressures cutting round, type R: moderate elongation, medium pressures cutting angular, type E: least elongation, high pressures Type S Type R Type E The shape of bellows depends on the intended application and is based on the operating pressure, operating temperature, required elongation and radial misalignment. Please provide the following technical information when enquiring: Installation length Elongation, +/- Misalignment, parallel and angular Medium Operating pressure Operating temperature In many cases, the sealing cone from a corresponding PTFE composition is sintered onto bellows for fittings without stuffing boxes. 241

6 PTFE compensators These compensators are manufactured of exceptional nighly compressed PTFE material. The extremely flexible and besides pressure-proofed manufactured from a compact block but in a complex manufacturing procedure without destruction of the existing filamentous structure. The compensators are provided with reinforment rings of stainless steel to increase the pressure-proof. PTFE compensators are suitable to absorption axial and radial movement. Also at applications with critical cinditions no symptoms of fatique occur. A especially long duability distinguish this product from others. Temperature operating pressure diagram Type K-102 Type K-103 n xbolt size Hole - Ø DN a D k l 1 Angel α (Dgree) Installation length A (mm) Elongation + (mm) Movement Movement axial (mm) K-102 K-103 n xbolt size Hole - Ø DN a D k l 1 Angel α (Dgree) Installation length A (mm) Elongation + (mm) Movement axial (mm) x , x , , x 18 19, , , x 18 19, , , x 18 21, , x 18 23, , x 18 23, x x x x x x x , x , , x18 19, , x18 19, , x18 21, , x18 23, , x18 23, , x , x , x , x x x x

material information 1

material information 1 material information 1 PTE PURE, virginal NUE 1 Polytetrafluoroethylene PTE is a polymerisate of tetrafluoroethylene. It is a partially crystalline fluorinated plastic with the highest level of fluorination.

More information

dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION

dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION PAGE Table of contents 1 dalcon 001 3 dalcon 006 9 dalcon 018 15 dalcon 020 17 dalcon 021 19 dalcon 025 23 dalcon 086 59 Page 1 of 16 ClactononSea dalcon

More information

Uni-Seals Product Catalog

Uni-Seals Product Catalog Uni-Seals Product Catalog www.uni-seals.com 0 Index PTFE Sheet/Rod/Tube GS4000 Pure PTFE sheet.. 2 GS4010 PTFE molded sheet 2 GS4020 PTFE skived sheet.. 2 GS4100 Expanded PTFE sheet.. 3 RO4000 PTFE rod.

More information

Amilon. The Alternative to Rulon

Amilon. The Alternative to Rulon Amilon The Alternative to Rulon It all starts with the right material Because we control our own PTFE compounding, sintering, and machining, we are able to create PTFE shapes or components to your exact

More information

AMILON Custom PTFE Products

AMILON Custom PTFE Products AMILON Custom PTFE Products Technetics PTFE & Polymer Solutions is the manufacturer of AMILON custom products, a family of PTFE based materials that are a smart alternative to RULON. AMILON specialty materials

More information

PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION

PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION PTFE BELLOWS TECHNICAL SPECIFICATION 1. MATERIALS 1.1 PTFE Only virgin (not reprocessed) PTFE conforming to ASTM D 1457, type III, IV or V shall be used for the production of bellows; the PTFE raw material

More information

SEALING SOLUTIONS FOR THE PROCESS INDUSTRY

SEALING SOLUTIONS FOR THE PROCESS INDUSTRY SEALING SOLUTIONS FOR THE PROCESS INDUSTRY INDUSTRY KNOW-HOW AND SPECIFIC SEALING SOLUTIONS THROUGH MARKET SEGMENT ORIENTATION SOLUTIONS FOR THE FOOD INDUSTRY The food industry includes a wide variety

More information

POLY TETRA FLUORO ETHYLENE

POLY TETRA FLUORO ETHYLENE POLY TETRA FLUORO ETHYLENE PTFE - SEMIFINISHED & FINISHED PRODUCTS PTFE is a high performance engineering speciality polymer invented by Dr. Roy J. Plunkett at Du Pont's Jackson th Laboratory, New Jersey,

More information

1 of 5. Benesome Sealing Sdn. Bhd. Neoprene Rubber, EPDM, NBR, HG EPDM, Metallic Strip. Neoprene Rubber EPDM HG EPDM NBR.

1 of 5. Benesome Sealing Sdn. Bhd. Neoprene Rubber, EPDM, NBR, HG EPDM, Metallic Strip. Neoprene Rubber EPDM HG EPDM NBR. Benesome Sealing Sdn. Bhd. Neoprene Rubber, EPDM, NBR, HG EPDM, Brand Neoprene Rubber Neoprene Rubber EPDM HG EPDM NBR White Neoprene Neoprene With Insertion Red Rubber Rough Rubber Metallic Strip Shape

More information

novatec HPN engineered graphite with KEVLAR

novatec HPN engineered graphite with KEVLAR engineered graphite with KEVLAR High Performance Graphite Beater (NBR) Supplier: Frenzelit Material: novatec HPN Density g/cm³: 1. Sample: 1 Scale: 1 : 1 Position: Transverse Longitudinal Applications

More information

Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems

Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems Metric Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems +1 (714) 841-3007 www.rbcbearings.com sales@rbcbearings.com Version No. 101 Last Revised: 03/19/2015 SELF-LUBRICATING

More information

REDCO POLYURETHANE DECREASE DOWNTIME ABRASION RESISTANT REDUCE NOISE ABSORBS IMPACT MINIMIZE MAINTENANCE OUTSTANDING DURABILITY

REDCO POLYURETHANE DECREASE DOWNTIME ABRASION RESISTANT REDUCE NOISE ABSORBS IMPACT MINIMIZE MAINTENANCE OUTSTANDING DURABILITY REDCO POLYURETHANE DECREASE DOWNTIME ABRASION RESISTANT REDUCE NOISE ABSORBS IMPACT MINIMIZE MAINTENANCE OUTSTANDING DURABILITY Redco REDCO Polyurethane POLYURETHANE Redco Polyurethane offers strength

More information

Weir Valve Selections

Weir Valve Selections Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless

More information

Heat Protection Materials Slide-Bearing Materials Ablation Materials

Heat Protection Materials Slide-Bearing Materials Ablation Materials Heat Protection Materials Slide-Bearing Materials Ablation Materials www.brandenburger-isoliertechnik.com Brandenburger Isoliertechnik Reliable - Trustable - Innovative Your specialist for heat protection

More information

Industrial Assembly and Maintenance High-Performance Lubricants Selection Guide

Industrial Assembly and Maintenance High-Performance Lubricants Selection Guide Industrial Assembly and Maintenance High-Performance Lubricants Selection Guide Molykote brand Smart Lubrication Solutions for Machine Components Meet your lubrication challenges. Select proven, effective

More information

Seals with boundless possibilities!

Seals with boundless possibilities! European Seals Seals with boundless possibilities! Seals with boundless possibilities! ERIKS bv, the Netherlands ERIKS European Seals From Alkmaar, the Netherlands, ERIKS bv supplies technical components

More information

PRECISION POLYURETHANES

PRECISION POLYURETHANES Company Profile: We at PRECISION POLYURETHANES manufacture and supply various types of Hi - Performance Cast Polyurethane components and other polyurethane products engineered for multipurpose industrial

More information

Precision Cages For Spindle, Turbine, Miniature and Instrument Ball Bearings

Precision Cages For Spindle, Turbine, Miniature and Instrument Ball Bearings BARDEN Precision Cages For Spindle, Turbine, Miniature and Instrument Ball Bearings GENERAL INFORMATION Proper selection of cage design and materials is essential to the successful performance of a precision

More information

ISO 9001:2008 Company. FluoroFoam eptfe from Poly Fluoro Ltd.

ISO 9001:2008 Company. FluoroFoam eptfe from Poly Fluoro Ltd. ISO 9001:2008 Company FluoroFoam eptfe from Poly Fluoro Ltd. About Poly Fluoro Since establishment in 1985 Poly Fluoro Ltd. has been at the forefront of thermoplastic innovation, pioneering the manufacture

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working - Drawing & Extrusion Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling

More information

The insulators are available in the standard colours green (40Sh-A), red (55Sh-A), and beige (70Sh-A).

The insulators are available in the standard colours green (40Sh-A), red (55Sh-A), and beige (70Sh-A). GMT-Insulators Description of parts and functions: The GMT-insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that

More information

2018 COMPANY PROFILE

2018 COMPANY PROFILE 2018 COMPANY PROFILE Milions SELF-LUBRICATING BUSHINGS AND WASHERS FOR VALVES AND OTHER APPLICATIONS IN THE HYDRAULIC, ENERGY AND METAL INDUSTRY 2015 2016 2017 2018 TURNOVER 4 3 2 3,6 Milions (forecast

More information

ERTALON Extruded Products

ERTALON Extruded Products ERTALON Extruded Products Polyamides (PA) Main Characteristics: High mechanical strength, stiffness, hardness and toughness Excellent resilience High mechanical damping ability Good sliding properties

More information

Flange Insulation Sets

Flange Insulation Sets Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as a galvanic cell and reduce the risk of galvanic

More information

TU-60 Unfilled high temperature performance, chemical resistant, V-0 flame rating

TU-60 Unfilled high temperature performance, chemical resistant, V-0 flame rating T Series Injection Molding Thermoplastic Polymers TU-6 Unfilled high temperature performance, chemical resistant, V- flame rating TL-6 Self lubricating superior wear resistance, low friction and cool running

More information

Paper, Cork & Rubber. Sheet Material. Telephone : Fax : E- mail :

Paper, Cork & Rubber. Sheet Material. Telephone : Fax : E- mail : Paper, Cork & Rubber 165 Paper, Rubber & Cork Gasket Materials Rubber, cork and paper-based gasket materials offer a low cost sealing solution for applications where the additional strength offered by

More information

Comflex Expansion Joints

Comflex Expansion Joints Comflex Expansion Joints Expansion Joints and Bellows Speed Wrap Stock expansion joints to minimize downtime Speed Wrap Whatever your industry; power generation, board mill, cement, petrochemical, steel,

More information

GASKET MATERIALS. Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet...

GASKET MATERIALS. Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet... GASKET MATERIALS Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet.... 2 Tealon Sheet Material Tealon TF1590........ 3 Tealon TF1580........

More information

Ultra High Molecular Weight Polyethylene (UHMWPE)

Ultra High Molecular Weight Polyethylene (UHMWPE) Ultra High Molecular Weight Polyethylene (UHMWPE) UTEC is the trade name of the Ultra High Molecular Weight Polyethylene (UHMWPE) developed and produced by Braskem with its own catalyst and production

More information

G E N E R A L C AT A L O G

G E N E R A L C AT A L O G G E N E R A L C AT A L O G C G 1 1 2 0 1 5 C O N T E N T Measurement High pressure Instrumentation Electronic devices Electromechanical Mechanical Transmission Diaphragm pumps Hydraulics Filtration Pneumatics

More information

KEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF

KEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF A heavy duty double flanged concentric design resilient seated butterfly valve FEATURES GENERAL APPLICATION These valves are for water or air service where a drop-tight shut-off and double flanged body

More information

Daikin Polyflon PTFE Products

Daikin Polyflon PTFE Products Positively Innovative Daikin Polyflon PTFE Products Product Information Guide for Aqueous Dispersions Fine Powders Granular Molding Powders Daikin America, Inc. / www.daikin-america.com / 845-365-9500

More information

Rings for dynamic seals

Rings for dynamic seals Rings for dynamic seals www.schunk-carbontechnology.com Content Schunk Carbon Technology 03 Carbon materials in dynamic seals 04 Rings for axial face seals 05 Feeder head sealing rings 10 Sealing rings

More information

KEYSTONE RMI DUBEX BUTTERFLY VALVE AWWA FACE-TO-FACE

KEYSTONE RMI DUBEX BUTTERFLY VALVE AWWA FACE-TO-FACE The Dubex is a double flanged, triple eccentric resilient seated valve design for services in the water industry FEATURES GENERAL APPLICATION Drinking water pump station and transportation/distribution.

More information

D Glide Materials Information Introduction Applications

D Glide Materials Information Introduction Applications D Glide Materials Information Introduction D Glide is the family name of a range of composite bearing materials produced by DRIE-D bv located in The Netherlands. The main properties they share are: -They

More information

Parker Engineered Materials Group Elastomers 101

Parker Engineered Materials Group Elastomers 101 Parker Engineered Materials Group Elastomers 101 Nathan Sowder Business Development Engineer Parker O-Ring Division June 2, 2016 Rubber Compound Mixture of base polymer and other chemicals Polymer Cure

More information

Connect with Quality. Flange Insulation Sets

Connect with Quality. Flange Insulation Sets Connect with Quality Flange Insulation Sets Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as

More information

Pipe Supports Comparison

Pipe Supports Comparison PIPE SUPPORTS: Comparison of the installation costs for various systems ARMAFIX The easy to install and cost effective solution to prevent thermal bridging at the pipe bracket in low-temperature applications.

More information

Automotive & Mechanical Applications Broad Base. Best Solutions.

Automotive & Mechanical Applications Broad Base. Best Solutions. Carbon and Graphite Materials for Mechanical Seals Automotive & Mechanical Applications Broad Base. Best Solutions. Tribological Behavior Friction Friction depends on surface finish of the mating surfaces

More information

United Surface Technologies

United Surface Technologies United Surface Technologies Engineered Coating Solutions Established 1986 www.ust.com.au Introduction United Surface Technologies (UST) Pty Ltd is an ISO 9001:2008 certified surface engineering company

More information

SHANDONG QISHUAI WEAR RESISTANT EQUIPEMNT CO.,LTD

SHANDONG QISHUAI WEAR RESISTANT EQUIPEMNT CO.,LTD SHANDONG QISHUAI WEAR RESISTANT EQUIPEMNT CO.,LTD T:8618766918053(whatsapp) email:florahu@zbqishuai.cn Skype:florahu11 Web:www.sdqishuai.com Website on alibaba.com: zbqishuai.en.alibaba.com ADD:Dufudian,zhutai,linzi

More information

TOP 5 REASONS TO USE FILM-CAST PTFE LINER TUBING FOR YOUR NEXT CATHETER DESIGN

TOP 5 REASONS TO USE FILM-CAST PTFE LINER TUBING FOR YOUR NEXT CATHETER DESIGN TOP 5 REASONS TO USE FILM-CAST PTFE LINER TUBING FOR YOUR NEXT CATHETER DESIGN TOP 5 REASONS TO USE FILM-CAST PTFE LINER TUBING FOR YOUR NEXT CATHETER DESIGN So you re thinking of using a low-friction

More information

ADVANCED. Plastic Pipe Testing Equipment

ADVANCED. Plastic Pipe Testing Equipment Plastic Pipe Testing Equipment Hydrostatic Pressure Tester www.worldoftest.com/hydrostatic-pressure-tester ASTM D-1598, ASTM D-1599, ISO 1167 QT-HPT Series is designed to determine the resistance of thermoplastics

More information

WILLBRANDT PTFE Expansion Joint Type 80

WILLBRANDT PTFE Expansion Joint Type 80 WILLBRANDT PTFE Expansion Joint Type 0 00 Type 0 is a 3 or corrugated PTFE expansion joint that is hotformed under pressure from extruded PTFE tubing. The fibers are executed without interruption. It is

More information

LINATEX premium rubber

LINATEX premium rubber LINATEX premium rubber Linard 60 Linard hd & hds LINAGARD BB LINAGARD FG LINATEX VS rubber LINAGARD NBR LINATEX premium rubber Linatex is a 95% natural rubber that exhibits outstanding resilience, strength

More information

Straightway Valves. Sec 2: Products. Dia-Flo Diaphragm Valves /15

Straightway Valves. Sec 2: Products. Dia-Flo Diaphragm Valves /15 Features and Benefits Ideal for slurry, abrasive and corrosive applications, the Dia-Flo Straightway Diaphragm Valve provides the following benefits: Slurry Applications Due to the streamlined fluidpassage,

More information

Breaking Strength and Elongation of Pressure Sensitive Tapes

Breaking Strength and Elongation of Pressure Sensitive Tapes Harmonized International Standard Breaking Strength and Elongation of Pressure Sensitive Tapes Call Letters PSTC-131 Date of Issuance 09/55 Revised 04/66 Revised 11/70 Revised 08/85 Revised 08/89 Revised

More information

Filament wound Plastic Self-lubricating Bearings

Filament wound Plastic Self-lubricating Bearings Filament wound Plastic Self-lubricating Bearings Filament wound Plastic Self-lubricating Bearings CSB-CRB: Glass fiber epoxy-impregnated with PTFE and high strength fibers CSB-CRG: Glass fiber epoxy-impregnated

More information

NAFLON Materials PTFE/PFA/PVDF/PCTFE

NAFLON Materials PTFE/PFA/PVDF/PCTFE NALON Materials T/A/VD/CT TOMBO luoropolymer resins products NALON Materials T/A/VD/CT NALON is the registered trademark of NICHIAS Corporation fluoropolymer resins products. fluoropolymer resins products

More information

TECHNICAL SPECIFICATION Conductive Elastomer Extruded Gaskets

TECHNICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Pag. 1/10 TECHNICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Electrically conductive silicone gaskets are manufactured in different standard profiles and upon client request, in silicone and

More information

HYDROPOWER INDUSTRY SOLUTIONS

HYDROPOWER INDUSTRY SOLUTIONS HYDROPOWER INDUSTRY SOLUTIONS Solutions That Increase Reliability and Reduce Costs Chesterton is a global manufacturer of industrial fluid sealing systems, industrial coatings, lubricants, and maintenance

More information

Casting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.

Casting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining. Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of

More information

Kingspan Day-Lite Klick

Kingspan Day-Lite Klick Insulated Panel Envelope Systems Roof Wall Façades Lighting Rooftop PV Coldstore Structural Products Cleanrooms UK & Ireland Kingspan Day-Lite Klick Installation Guide Page 2 Accessories Overview Designation

More information

ASME B31.3 Process Piping

ASME B31.3 Process Piping ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)

More information

GLACIER GARLOCK BEARINGS. Technical Information

GLACIER GARLOCK BEARINGS. Technical Information PTFE Based Lead Free Metal-Polymer Plain Bearing Materials for Lubricated Applications Technical Information GLACIER GARLOCK BEARINGS 1 Introduction This brochure describes the range of Glacier Garlock

More information

REDCO POLYURETHANE DECREASE DOWNTIME ABRASION RESISTANT REDUCE NOISE ABSORBS IMPACT MINIMIZE MAINTENANCE OUTSTANDING DURABILITY

REDCO POLYURETHANE DECREASE DOWNTIME ABRASION RESISTANT REDUCE NOISE ABSORBS IMPACT MINIMIZE MAINTENANCE OUTSTANDING DURABILITY REDCO POLYUREHANE DECREASE DOWNIME ABRASION RESISAN REDUCE NOISE ABSORBS IMPAC MINIMIZE MAINENANCE OUSANDING DURABILIY Redco REDCO Polyurethane POLYUREHANE Redco Polyurethane offers strength and durability

More information

Vibration Control SCHWINGMETALL. The Original Rubber-To-Metal Bonding from ContiTech

Vibration Control SCHWINGMETALL. The Original Rubber-To-Metal Bonding from ContiTech Vibration Control SCHWINGMETALL The Original Rubber-To-Metal Bonding from ContiTech ContiTech Vibration Control Innovator and Development Partner ContiTech is an innovator and development partner for vibration-damping

More information

Uni-Seals Product Catalog

Uni-Seals Product Catalog Uni-Seals Product Catalog www.uni-seals.com 0 Index Graphite Series CL1020 Woven graphite cloth.. 2 TA1020 Woven graphite tape 3 TA1027 Woven graphite tape with self-adhesive... 3 Asbestos Series CL2020

More information

brands you trust. Tufline Lined Ball Valves

brands you trust. Tufline Lined Ball Valves brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

More information

Installation of stuffing box packings

Installation of stuffing box packings Installation of stuffing box packings 1. Selection of best suited packing style 2. Determination of correct packing cross section 3. Calculation of the correct length of packing rings 4. Cutting the packing

More information

VALVE PRODUCT OVERVIEW

VALVE PRODUCT OVERVIEW WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing

More information

SQUARE PORT KNIFE GATE VALVE

SQUARE PORT KNIFE GATE VALVE SQUARE PORT KNIFE GATE VALVE The SERIES 90 knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as: Power

More information

60Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials

60Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials 6Hz Route range ZMR mechanical sealed TMR magnetical driven centrifugal pumps in thermoplastic materials 2 Route TMR - ZMR In this catalog Argal proposes the range of ROUTE pumps, inclusive of magnetical

More information

1. 3 Extrusion molding

1. 3 Extrusion molding 1. 3 Extrusion molding 9 Extrusion is a widely used technique, both in the field of traditional and technical ceramics. This method allows the continuous manufacture of products with a constant cross-

More information

TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets

TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets Pag. 1/6 TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets This category of items is in continuous evolution. The raw material from which it is made is the first component that must be analyzed

More information

Cryogenic Metal Seated Butterfly Valves

Cryogenic Metal Seated Butterfly Valves Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly

More information

SKF composite plain bearings

SKF composite plain bearings SKF composite plain bearings Compact and maintenance-free Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as

More information

Sabrorazi (Technymon Polymers Divis.)

Sabrorazi (Technymon Polymers Divis.) Sliding Bearings Foreword Mongodi Group started up in 975 as a small owned family company specialized in the production of sliding bearings. Thanks to the strong attachment to the business and to all the

More information

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm

More information

Pneumatic butterfly valve

Pneumatic butterfly valve Pneumatic butterfly valve R V Specialized manufacture, Specialized service, RFS valve devote to satisfy user s expectation, improving service quality continuously. keeping improving. Ordering Code R V

More information

NIMROD'S PRODUCT BROCHURE

NIMROD'S PRODUCT BROCHURE NIMROD'S PRODUCT BROCHURE JUST A SMALL LISTING OF OUR MASSIVE SELECTION AT NIMROD PLASTICS Phone: (02) 4322 4333 - Fax: (02) 43224 344 3,3 Daintree Close GOSFORD WEST NSW 2250 Australia Copyright Nimrod

More information

Thickness (T) 0,07 to 3/8 (1,78 to 9,52 mm) 1 3T 4T 2 4T 5T 3 4T 5T 4 5T 6T 5 9T 10T 7 4T 5T 11 3T 4T 12 4T 5T 16 4T 5T 17 3T 4T

Thickness (T) 0,07 to 3/8 (1,78 to 9,52 mm) 1 3T 4T 2 4T 5T 3 4T 5T 4 5T 6T 5 9T 10T 7 4T 5T 11 3T 4T 12 4T 5T 16 4T 5T 17 3T 4T TITANIUM FORMING Forming Titanium is readily formed at room temperature, using techniques and equipment suitable for steel. When correct parameters have been established, tolerances similar to those attainable

More information

SECTION VIBRATION ISOLATION

SECTION VIBRATION ISOLATION SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping

More information

DARTMOUTH COLLEGE DESIGN September 15, 2004 &CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN September 15, 2004 &CONSTRUCTION GUIDELINES PART 1 DESIGN DIRECTIVE 1.1 RELATED DOCUMENTS SECTION 15240 SEISMIC RESTRAINT AND VIBRATION CONTROL A. This section shall be considered as a part of each DC Standards, Part 15. 1.2 QUALITY ASSURANCE A.

More information

Changzhou Meridian Rubber & Plastic Co., LTD

Changzhou Meridian Rubber & Plastic Co., LTD Changzhou Meridian Rubber & Plastic Co., LTD Founded in 2005, after several years, Changzhou Meridiang becomes a reliable industrial parts and semi-finished products one-stop supplier. We served industries:

More information

GEOMEMBRANE INSTALLATION GUIDELINES RUFCO 20, 30 & 40 MIL UNREINFORCED DURA SKRIM 30, 36 & 45 MIL REINFORCED

GEOMEMBRANE INSTALLATION GUIDELINES RUFCO 20, 30 & 40 MIL UNREINFORCED DURA SKRIM 30, 36 & 45 MIL REINFORCED GEOMEMBRANE INSTALLATION GUIDELINES RUFCO 20, 30 & 40 MIL UNREINFORCED DURA SKRIM 30, 36 & 45 MIL REINFORCED Sept 2010 TABLE OF CONTENTS SECTION PAGE 1.0 SUBGRADE PREPARATION 3 2.0 PANEL LAYOUT 4 3.0 IDENTIFICATION

More information

SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.

SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION.  T.A. Morrison & Co. Inc. 1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4

More information

Pump Company. Simsite Structural Composite Pumps. The only Pump that is Impervious to Salt Water Corrosion. Since 1919 VERTICAL PIT

Pump Company. Simsite Structural Composite Pumps. The only Pump that is Impervious to Salt Water Corrosion. Since 1919 VERTICAL PIT Pump Company Since 1919 Simsite Structural Composite Pumps VERTICAL PIT SERIES 10000 MARINE & INDUSTRIAL SERIES 6000 VERTICAL IN LINE NAVY STANDARD VERTICAL TURBINE HORIZONTAL VORTEX The only Pump that

More information

Resource Guide. Section 2: Gray Iron

Resource Guide. Section 2: Gray Iron Resource Guide Section 2: Gray Iron Section 2 Gray Iron Description of Grades... 2-3 G1 Partially Ferritic... 2-4 G1A Ferritic... 2-6 G2 Highly Pearlitic... 2-8 G2A Highly Perlitic High-Strength... 2-10

More information

AB-1020 EP Dust Free Vacuum Blast Machine

AB-1020 EP Dust Free Vacuum Blast Machine AB-1020 EP Dust Free Vacuum Blast Machine This compact electric-pneumatic driven injection vacuum blasting machine with an average blasting pattern of 16 mm width, is excellent to apply for blast cleaning

More information

SKF composite plain bearings. Compact and maintenance-free

SKF composite plain bearings. Compact and maintenance-free www.bergab.ru Берг АБ skf@bergab.ru Тел.(495)-228-06-21,факс (495) 223-3071 SKF composite plain bearings Compact and maintenance-free Contents The SKF brand now stands for more than ever before, and means

More information

Improved Technologies of Steam Turbine for Long Term Continuous Operation

Improved Technologies of Steam Turbine for Long Term Continuous Operation Improved Technologies of Steam Turbine for Long Term Continuous Operation SUMIO NODA* 1 YOSHIKAZU YAMADA* 2 SATORU ZENITANI* 2 TOMOYOSHI SASAKI* 3 There are increased demands in recent years for improved

More information

THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK

THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK or our breadth of capability. Of all the storage tank manufacturers doing business today, no other offers Caldwell s range of capability. We are the only manufacturer

More information

Orkot Slydring - Wear Ring

Orkot Slydring - Wear Ring Orkot Slydring for Piston and Rod Description Orkot Slydring of fabric reinforced composite materials is used in hydraulic cylinders exposed to high loads that can occur e.g. in mobile hydraulics and presses.

More information

NEOFLON TM PFA Coating Powder

NEOFLON TM PFA Coating Powder Product Information Coating NEOFLON TM PFA Coating Powder NEOFLON PFA coating is fine particles of copolymer of tetrafluoroethylene and perfluoroalkylvinylether. Since NEOFLON PFA has lower melt viscosity

More information

POLYCOM high-pressure grinding roll.

POLYCOM high-pressure grinding roll. POLYCOM high-pressure grinding roll. POLYCOM high-pressure grinding roll the proven, energy-saving grinding system. Outstanding results are obtained with the high-pressure grinding roll for the comminution

More information

Seals On Demand engineered, machined, delivered.

Seals On Demand engineered, machined, delivered. SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.

More information

Extrusion. Key Issues to Address. Lecture 2. Process. Process Variants. Process Analysis. Problem Solving

Extrusion. Key Issues to Address. Lecture 2. Process. Process Variants. Process Analysis. Problem Solving Extrusion Lecture 2 Chapter 4 Key Issues to Address Process Process Variants Process Analysis Problem Solving S.V. Atre 1 Extrusion Material is forced to flow through a die orifice to provide long continuous

More information

Introduction to Joining Processes

Introduction to Joining Processes 1. CLASSIFICATION OF JOINING METHODS The three basic options available for assembly and joining of engineering components may be designated: 1. mechanical 2. chemical 3. physical Some familiar examples:

More information

DURNI-COAT Industrial Coatings for Metals and Plastics

DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT High wear resistance Good dimensional accuracy Outstanding hardness Excellent corrosion resistance Uniform layer formation Electrical conductivity

More information

Mechanical Insulation for Refrigeration Systems

Mechanical Insulation for Refrigeration Systems Mechanical Insulation for Refrigeration Systems INDUSTRIAL REFRIGERATION CONSORTIUM RESEARCH & TECHNOLOGY FORUM MAY 2-3, 2012 Peter Gauchel, President/CEO L&C Insulation Inc. Overview Current trends in

More information

A REVIEW OF PROPERTIES, APPLICATIONS AND PRESENTLY STUDY DONE ON CERAMIC BEARINGS

A REVIEW OF PROPERTIES, APPLICATIONS AND PRESENTLY STUDY DONE ON CERAMIC BEARINGS Review Article ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 3, July, 2014 2014 IJMERR. All Rights Reserved A REVIEW OF PROPERTIES, APPLICATIONS AND PRESENTLY STUDY DONE ON CERAMIC BEARINGS Simran Dutt Sharma

More information

MECHANICAL AND PHYSICAL PROPRIETIES

MECHANICAL AND PHYSICAL PROPRIETIES Kera-Coat Ceramic Coatings are Special Ceramic Coating defined as a substantially vitreous or glassy inorganic coating bonded to metal by fusion at a temperature above 800 F. In this short abstract we

More information

SECTION PIPING INSULATION

SECTION PIPING INSULATION SECTION 23 07 19 PIPING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Piping insulation for refrigerant piping within building envelope. 2. Furnishing and installation of insulation.

More information

ÍNDICE FICHAS TÉCNICAS. PA-WC-FDA PEEK-CN-FDA POM-WE-FDA PTFE-BR40 PTFE-C25 PTFE-FV25 PTFE-FVMoS2 PTFE-P-W-FDA UHMW-PE1000-FDA

ÍNDICE FICHAS TÉCNICAS. PA-WC-FDA PEEK-CN-FDA POM-WE-FDA PTFE-BR40 PTFE-C25 PTFE-FV25 PTFE-FVMoS2 PTFE-P-W-FDA UHMW-PE1000-FDA S ÍNDICE S TÉCNICAS PA-WC-FDA PEEK-CN-FDA POM-WE-FDA PTFE-B40 PTFE-C5 PTFE-FV5 PTFE-FVMoS PTFE-P-W-FDA UHMW-PE1000-FDA 3 4 5 6 7 8 9 10 11 PA-WC-FDA 0 0 ) 0 ))// 8 : : < < < 5=% : 8 < < < 8 < : C/ Cicilisme

More information

years of providing Customer Solutions years

years of providing Customer Solutions years 65 years of providing Customer Solutions 65 years UTEX Industries, Inc. was founded in 1940 as Universal Packing and Gasket Co. In its early years, Universal supplied packing and gaskets to the local Houston

More information

HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST

HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST 2 3 WEAR RESISTANT FLEXIBLE INDUSTRIAL TRANSPORT VEINS Pipes and hoses are the transport veins for industrial processes. Often special solutions

More information

PIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D

PIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D PIPEWORK INSULATION 14/10-2014 Page 1 of 10 Pipework Insulation Rev D Contents INTRODUCTION General Scope Surfaces to be Insulated Pumps, Turbines etc Performance Minimum Pipe Insulation Thickness Physical

More information

H series. for upper balconies DN 100. DN 100 Vers. a X X. Partial unit Side drain

H series. for upper balconies DN 100. DN 100 Vers. a X X. Partial unit Side drain instructions LORO direct balcony drains with connecting sleeve, EN 123-compliant, Steel, hot-dip galvanised, additionally coated, and DN 100 System overview for balcony storeys one-piece for upper balconies

More information