MONDAY SEPTEMBER 18, 2017
|
|
- Buck Jenkins
- 5 years ago
- Views:
Transcription
1 MONDAY SEPTEMBER 18, 2017 Session Title: C1.1: Coatings and thin films 1/6 -Friction Chairperson: A. Cavaleiro, R. Peng PM2: PM1: Adhesion and tribological performance of hard CAPVD coatings Developing nano-layered coatings for application on high speed cutting tools Effect of period on properties of Ti0.54Al0.46/Ti0.54Al0.46N multilayer coatings deposited by reactive gaz pulsing process Non-reactively sputtered ultra-high temperature Ta-C coatings 532 Highlight Session Title: C1.1: Coatings and thin films 2/6 Coatings structure I Chairperson: T. Polcar, D. Holec Novel thin protective coatings for automobile engine valves 1667 Highlight Effects of Annealing on the Nanostructure of PVD CrCuAgN Nanocomposite Coatings Microstructural characterization of Hf-doped CrAlN thin films deposited by DC magnetron sputtering Study on the atomic and electronic structure in CrN/AlN multilayers Insights into the growth of GaN and Fe based nitrides using Electron Beam Physical Vapour Deposition. Structural and mechanical properties of ZrMo thin films: from the nanocrystalline to the amorphous state Chairperson: Z. Grzesik, A. Cavaleiro Role of point defects for predicting phase stability: a case study of Ta-Al-N and Nb- Al-N systems Synthesis of (Nb,Ti)N ultrathin films by Chemical Vapor Deposition Can we design frictionless material? Session Title: C1.1: Coatings and thin films 3/6 Coatings structure II Effect of bias voltage induced microstructure on the mechanical properties of new nanostructured Ti-Nb-Zr coatings for implant materials Amorphous aluminum oxides: CVD processing, local coordination and multifunctionality Scanning Kelvin Probe Blister Studies of the Delamination of Epoxy Films on Organosilane Modified ZnMgAl Alloy Coated Steel Ab initio study of the atomic level structure of TiO2-TiN interfaces for antibiofouling applications Effect of electropolishing on conventional and sever shot peened surfaces properties Highlight Keynote 1/8
2 TUESDAY SEPTEMBER 19, 2017 Session Title: C1.1: Coatings and thin films 4/6 -Wear coatings Chairperson: N. Markocsan, E. Aperathitis Elaboration of wear resistant carbide-base surface layers via concentrated solar power Stress reduction in hard Ti(Al,V)N films resistant to cracking by energy delivered during their growth 654 Highlight Nano-sized carbon black particle reinforced composite coatings: mechanical behavior-structure relation Structure, mechanical and tribological properties of HVOF sprayed (WC-Co+Al) composite coating on ductile cast iron ZIRCONIA FILMS: MICROSTRUCTURES AND MECHANICAL STRENGTH Hot corrosion behavior of HVOF CoNiCrAlY(Hf) coating on Ni-based superalloys PM1: Session Title: C1.1: Coatings and thin films 5/6 Chairperson: P. Psyllaki, R. Oliveira Functional Coatings by Liquid Feedstock Plasma Spraying 1098 Highlight High-T coatings Structure, mechanical and tribological properties of Zr-Si-B-(N) nanofilms with oxidation resistance up to 1400 C Corrosion mechanism in Thermal Barrier Coatings during exposure to a gas mixture containing SO2 Sintering behaviour of columnar thermal barrier coatings produced by axial suspension plasma spraying Microstructure of self-healing thermal barrier coatings deposited by suspension plasma spraying Requirements for High Temperature Materials and Coatings in Future Energy Systems with Growing contribution of Renewable Energy Generation Highlight 2/8
3 TUESDAY SEPTEMBER 19, 2017 Session Title: C1.1: Coatings and thin films 6/6 Composite coatings Chairperson: L. Singheiser, A, Cavaleiro Evaluation of Young's Modulus at Elevated Temperatures of Thermal Barrier Coating by Bending Resonance Method 1971 PM2: HYBRID NANOCOMPOSITE COATINGS BY AEROSOL-ASSISTED ATMOSPHERIC COLD PLASMA DEPOSITION: PREPARATION, CHARACTERIZATION AND APPLICATIONS The growth of silver nanoparticles on titanium dioxide coatings partially covered by graphene sheets Water borne polyurethane composite films with few layer graphene Intrinsic hydrophobicity of thin films of ceramics based on low-electronegativity metals prepared by magnetron sputtering High-temperature Hf B Si C N films with controlled electrical conductivity and optical transparency prepared by pulsed magnetron sputtering 141 3/8
4 WEDNESDAY SEPTEMBER 20, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 1/5 Deposition routes I Chairperson: R. Cremer, M. Bender Enabling Mobility for Tomorrow with Surface Technology Controlled reactive HiPIMS of thermochromic VO2 films at a low deposition temperature (300 C) Phase formation and oxidation behaviour of cathodic arc evaporated Al1-x-yCrxFey and Al1-x-yCrxFeyOδ thin films A comparable study of thermochromic VO2 films grown by sputtering and hydrothermal synthesis techniques 2572 Keynote Cathodic arc sputtering of lower titanium oxides Nitrogen Ionic Implantation into Niobium for Technological Applications 1275 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 2/5 Deposition routes II Chairperson: N. Bagcivan, H. Biederman PM1: An Application for the static large area PVD technology with a rotary cathode array: Deposition of next generation MOx active layers for AM-TFT display backplanes Thermal spray coatings deposition on ballistic aramide textiles for improved performance lightweight protective panels Microstructural Analysis of 200 µm Thin Sheets Coated by Laser Cladding Effect of bath composition for Ni-P coatings on carbon fibres ECR Plasma deposited a-sicn:h as insulating layer in piezoceramic modules Keynote /8
5 WEDNESDAY SEPTEMBER 20, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 3/5 Characterization Chairperson: R. Cremer, G. Orhan Nanoparticle and Nanocomposite Films with Plasma Polymers 756 Highlight Core-shell nanoparticles arising from plasma polymerization 1682 PM2: Production, Characterization, and Residual Strain Analysis of Thick Plasma Sprayed Tungsten Coatings for Nuclear Fusion Applications Nano beam X-ray diffraction analysis of stress and strain in high-temperature oxidation resistant Mo-Si-B/Ti-Al-N multilayer coatings Tribiological behavior of TC4 alloy modified by high-frequency induction paste alloying technology Production of carbon coated Al-foams and evaluation of their mechanical behaviour /8
6 THURSDAY SEPTEMBER 21, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 4/5 -Biocoatings Chairperson: R. Cremer, A. R. González-Elipe Zinc and Zinc-Iron Nanoparticles as Oxygen Scavengers 1541 Highlight Plasma coating of biodegradable nanofibers to generate smart antibacterial surfaces Characterization of waterborne polyurethane-nano silica coatings for icephobic applications Plasma micro-nanotextured 3D surfaces and their applications in wetting and life sciences Sublimating Dry Ice Coatings as a Means for Contactless Manipulation of Liquids Anodically electrodeposited Pb-Co-Sn coatings as electrocatalyst for oxygen evolution reaction Impact of solvent composition on formation of PEMFC electrode layers 1420 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 5/5 -Multi-coatings Chairperson: D.S. Calderon, A. Weisenburger Microstructural control over porous oxide multilayers prepared by MS for environmentally stable 1D photonic structures 1990 Highlight PM1: The use of synergistic effect between the optical and semiconductor properties of AgNPs/TiO2 photonic crystals for the photocatalytic activity enhancement Photoluminescence properties of porous silicon embedded with II-VI semiconductors High Transparent and Stable Silver Nanowires as Flexible Transparent Electrode using Plasma Technique Atomic layer deposition of copper oxide and metallic copper thin films Fabrication and properties of electroplated Fe Cu continuous films and porous microstructures deposited onto e-beam lithographed patterns /8
7 THURSDAY SEPTEMBER 21, 2017 Session Title: C1.3: Surface engineering and modifications 1/3 -Corrosion Chairperson: Κim Dogeun, E. Aperathitis Increased corrosion resistance by surface modification using intense pulsed electron beams 251 Highlight Stategies to correlate the microstructure of chromium based and chromium free conversion layers on aluminium alloy to their electrochemical properties 541 PM2: Role of anodization treatment for in-situ growth of LDH-nanocontainers used for active corrosion protection of aluminum alloy AA2024 Anodizing of magnesium in alkaline media: a description of the mechanisms leading to the dielectric breakdown A chemical view of chromate conversion coating on magnesium alloys EV31A: an XPS and Auger spectroscopies approach Influence of cyclic oxidation in moist air on surface oxidation-affected zones 22 7/8
8 FRIDAY SEPTEMBER 22, 2017 Session Title: C1.3: Surface engineering and modifications 2/3 -Functionality I Chairperson: E. Aperathitis, R. Peng Effect of Microstructure Features on DLC Delamination and Blistering Thermochemical heat storage systems with honeycomb filter type heat exchanger systems ANTIFOULING PROPERTIES OF PLASMA ELECTROLYTIC OXIDATION (PEO) COATED ALUMINUM ALLOYS TESTED IN SEAWATER STUDY OF THE TRIBOCORROSION PROPERTIES OF PEO COATINGS PRODUCED ON AZ91 MAGNESIUM ALLOY A possible explanation for the delay in micro-discharges appearance during PEO of Al Hybrid coatings with Cu-based nanoparticles on polymer and steel surfaces for biofouling control ,00 Towards the Plasmonic Optical Nanopore on Pyramid 423 Session Title: C1.3: Surface engineering and modifications 3/3 -Fatigue & Wear Chairperson: E. Aperathitis, R. Cremer Pulsed Plasma Surface Functionalized Nanosilver for Gene Delivery 1236 PM1: Microstructural Study of Shot Peened Nickel-based Superalloy (U720Li) under Isothermal Exposure Fatigue of Dengeling Treated Al-Alloys Surface modification of geomaterials using high-power nanosecond pulses Investigation of an advanced heat treatment of ZrNb7 for improved wear resistance in tribological applications /8
Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
More informationMetallization deposition and etching. Material mainly taken from Campbell, UCCS
Metallization deposition and etching Material mainly taken from Campbell, UCCS Application Metallization is back-end processing Metals used are aluminum and copper Mainly involves deposition and etching,
More informationDevelopment of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Current Materials Accomplishments till date As the structural
More informationTribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates
Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates Dr. Iván Fernández Martínez Indianapolis, May 10th, 2016 Diamond Like Carbon (DLC) Diamond-like
More information2.3.3 Plasma Sulphurizing Restriction of Plasma Nitriding Development of Plasma Nitriding in China References...
Contents 1 Introduction... 1 1.1 Engineering Materials and Its Surface.... 1 1.2 Surface Engineering and Its Classification... 2 1.2.1 Concept of Surface Engineering... 2 1.2.2 Surface Hardening Technology...
More informationMETHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
More informationGeneral Introduction to Microstructure Technology p. 1 What is Microstructure Technology? p. 1 From Microstructure Technology to Microsystems
General Introduction to Microstructure Technology p. 1 What is Microstructure Technology? p. 1 From Microstructure Technology to Microsystems Technology p. 9 The Parallels to Microelectronics p. 15 The
More informationAnticorrosive Coatings
Anticorrosive Coatings Joerg Sander 1 Introduction 1.1 Why corrosion-protective coatings 1.2 Literature 2 Corrosion protection coatings 2.1 Principles of function 2.1.1 Electrochemistry of corrosion inhibition
More informationCONTENTS. Preface to the 3rd Edition Acknowledgments
CONTENTS Preface to the 3rd Edition Acknowledgments vii ix CHAPTER 1 INTRODUCTION 1 1.1 Definition of materials degradation 1 1.2 Definition and significance of surface engineering 4 1.3 Classification
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC C COOPERATIVE PATENT CLASSIFICATION CHEMISTRY; METALLURGY (S omitted) METALLURGY C22 METALLURGY (of iron C21); FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS (production of
More informationThermal Durability and Abradability of Plasma Sprayed Al-Si-Polyimide Seal Coatings p. 85
Trends in Automotive Applications of Thermal Spray Technology in Japan p. 1 Production Plasma in the Automotive Industry: A European Viewpoint p. 7 The Effect of Microstructure on the Wear Behavior of
More informationPHS6317 NANO-ENGINEERING OF THIN FILMS
PHS6317 NANO-ENGINEERING OF THIN FILMS Ludvik Martinu, ing., PhD Professor Chairholder: NSERC Multisectorial Industrial Research Chair in Coatings and Surface Engineering ludvik.martinu@polymtl.ca www.polymtl.ca/larfis
More informationWEDNESDAY SEPTEMBER 20, 2017
WEDNESDAY SEPTEMBER 20, 2017 Session Title: Multiscalle modeling and connecting to continuum level descriptions Chairperson: Harmandaris-Goddin 11.20 Atomistically informed full-field simulation of tempered
More informationJoint Technology Initiatives Collaborative Project (FCH) FCH-JU WP4 - Development of lab-scale cell components
Joint Technology Initiatives Collaborative Project (FCH) FCH-JU-2010-1 WP4 - Development of lab-scale cell components DELIVERABLE 4.3- Prepared by: HOGANAS Document control data Document ref. : METPROCELL-WP4-
More informationMaterial Evaporation Application Comment MP P / Optical films, Oxide films, Electrical contacts. Doping, Electrical contacts.
for vapour Aluminum (Al) -, Optical, Oxide, Electrical BN liners with lid are recommended due to the reactivity and the fact that Al creeps out. Cooling down of the cell with 1K per minute. 660 972 Antimony
More informationWater Erosion Experiment Update. T.Davenne O.Caretta S.Bennetton 5 th Dec 2013
Water Erosion Experiment Update T.Davenne O.Caretta S.Bennetton 5 th Dec 2013 Motivation ISIS water cooled tungsten targets are clad with tantalum to avoid tungsten corrosion problems that occur when in
More informationTHERMAL SPRAY COATINGS
THERMAL SPRAY COATINGS THERMAL SPRAY is a group of processes in which metals, alloys, ceramics, plastics and composite materials in the form of powder, wire, or rod are fed to a torch or gun with which
More information2 9 & 3 0 J U N E, P A R I S - F R A N C E
2 9 & 3 0 J U N E, 2 0 1 4 P A R I S - F R A N C E HIGH-TECH MATERIALS FOR TOMORROW'S LARGE SCALE INDUSTRIAL DEVELOPMENTS: ENERGY GENERATION AND TRANSPORT, ADVANCED STRUCTURAL DESIGNS, AND DATA PROCESSING
More information4-in-1 Nano Machine & Technology
4-in-1 Nano Machine & Technology Machine combines 1) CVD, 2) PVD, 3) ion saturation and 4) ion-treatment processes in one (1) production cycle in one machine that produces functional coatings used to harden
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationTribological and Catalytic Coatings
Tribological and Catalytic Coatings Objectives: Study of mechanical properties of nanocomposite and nanolaminate thin films deposited by pulsed laser deposition (PLD): Nitride-based coatings (AlN, TiN,
More informationNASF SURFACE TECHNOLOGY WHITE PAPERS 82 (2), 1-5 (November 2017)
Can Electroplated Fe-C be an Environmentally Friendly Alternative to Hard Chromium and DLC Coatings? A Synopsis * of a Presentation given at SUR/FIN 2017 (Atlanta, Georgia) by Lars Plath Nielsen ** Tribology
More informationJānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing
Jānis Grabis Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Outline Introduction nanoparticles, their preparation methods Experimental synthesis of multicomponent
More informationHigh Quality Multi-arc Targets
High Quality Multi-arc Targets IKS provides high-quality multi-arc targets for a wide range of applications for ferromagnetic, complex oxides, and semiconducting films. Our targets are offered in various
More informationExpertise on following materials: Thanks to the structure of CSNMT, the expertise covers nearly all engineering materials.
NAME: CZECH SOCIETY FOR NEW MATERIALS AND TECHNOLOGIES (CSNMT), PRAHA COUNTRY: CZECH REPUBLIC Profile : The Czech Society for New Materials and Technologies (CSNMT), founded in 1993, is a voluntary association
More informationThermal Evaporation. Theory
Thermal Evaporation Theory 1. Introduction Procedures for depositing films are a very important set of processes since all of the layers above the surface of the wafer must be deposited. We can classify
More informationMetal-containing diamond-like carbon with self-assembled alternating nano-scaled layers
Metal-containing diamond-like carbon with self-assembled alternating nano-scaled layers Wan-Yu Wu, Jyh-Ming Ting* Mina Materials Laboratory, Department of Materials Science and Engineering, National Cheng
More informationToday s Class. Materials for MEMS
Lecture 2: VLSI-based Fabrication for MEMS: Fundamentals Prasanna S. Gandhi Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology, Bombay, Recap: Last Class What is
More informationSilver Diffusion Bonding and Layer Transfer of Lithium Niobate to Silicon
Chapter 5 Silver Diffusion Bonding and Layer Transfer of Lithium Niobate to Silicon 5.1 Introduction In this chapter, we discuss a method of metallic bonding between two deposited silver layers. A diffusion
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationSubject Index. STP1169-EB/Sep.1992
STP1169-EB/Sep.1992 Subject Index A Acoustic spectroscopy, frequency response in Ta and Nb, 358 Aluminum ceramic-reinforced, 76 pure, dislocations in, 199 Aluminum-indium alloys, melting-related internal
More informationMostafa Soliman, Ph.D. May 5 th 2014
Mostafa Soliman, Ph.D. May 5 th 2014 Mostafa Soliman, Ph.D. 1 Basic MEMS Processes Front-End Processes Back-End Processes 2 Mostafa Soliman, Ph.D. Wafers Deposition Lithography Etch Chips 1- Si Substrate
More informationTHIN NICKEL OXIDE LAYERS PREPARED BY ION BEAM SPUTTERING: FABRICATION AND THE STUDY OF ELECTROPHYSICAL PARAMETERS
THIN NICKEL OXIDE LAYERS PREPARED BY ION BEAM SPUTTERING: FABRICATION AND THE STUDY OF ELECTROPHYSICAL PARAMETERS Pavel HORÁK a,b, Václav BEJŠOVEC b, Vasyl LAVRENTIEV b, Jiří VACÍK b, Martin VRŇATA a,
More informationPlasma Activated EB-PVD of Titanium and its Compounds by Means of Large Area SAD
AIMCAL 2005 Myrtle Beach, SC, USA, October 19th, 2005 Plasma Activated EB-PVD of Titanium and its Compounds by Means of Large Area SAD E. Reinhold, C. Steuer VON ARDENNE Anlagentechnik GmbH, Dresden, Germany
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationCourse: Technology of Surface Coating. Prof. A. K. Chattopadhyay
Course: Technology of Surface Coating Prof. A. K. Chattopadhyay Lecture: 1 Introduction 1. State some functions of solid material 2. State some desirable combination of mechanical properties of materials.
More informationFUTURE MATERIALS MADE BY TODAY S PEOPLE CELLS FOR MATERIALS AND ADVANCED MATERIALS FOR ENERGY APPLICATIONS
FUTURE MATERIALS ADVANCED MATERIALS FOR ENERGY APPLICATIONS INNOVATIVE AND SUSTAINABLE POLYMERIC MATERIALS CELLS FOR MATERIALS AND MATERIALS FOR CELLS MULTIFUNCTIONAL SURFACES LIFE CYCLE THINKING CHARACTERIZATION
More informationCHEMICAL DEPTH PROFILING OF TOOL MATERIALS USING GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY (GD-OES)
CHEMICAL DEPTH PROFILING OF TOOL MATERIALS USING GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY (GD-OES) T. Björk Swedish Institute for Metals Researc Drottning Kristinas väg 48 114 28 Stockholm Sweden Abstract
More informationengineering of light alloys
Surface engineering of light alloys Aluminium, magnesium and titanium alloys Edited by Hanshan Dong TECHNISCHE INFORMATIONSBIBLIOTHEK UNIVERSITATSBIBLIOTHEK HANNOVER Boca Raton CRC Press Boston New York
More informationMaterial development for emerging energy technologies
Material development for emerging energy technologies Need and Approach Need Sustainable power generation is needed for the mitigation of global warming caused by greenhouse gas emissions. Advanced materials
More informationAtomic structure, arrangement, and movement Introduction to Materials Introduction Types of Materials Structure-Property-Processing Relationship
Atomic structure, arrangement, and movement to Materials Types of Materials Structure-Property-Processing Relationship Environmental Effects on Material Behavior Materials Design and Selection Atomic Structure
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationBeechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationHigh Temperature Ta/MnO 2 Capacitors
High Temperature Ta/MnO 2 Capacitors Y. Freeman, A. Chacko, P. Lessner, S. Hussey, R. Marques, and J. Moncada KEMET Electronics Corporation, 2835 KEMET Way, Simpsonville, SC 29681, yurifreeman@kemet.com
More informationSurface engineering for new industrial applications - bio application
Surface engineering for new industrial applications - bio application Dr. Yangchun Dong Bsc. Msc. PhD Tel.: +420541143323 Mobile: +420776395588 30/10/2013, Brno Introduction 1. A few questions to answer:
More informationComposite Materials. Metal matrix composites
Composite Materials Metal matrix composites Introduction The properties that make MMCs attractive are high strength and stiffness, good wear resistance, high service temperature, tailorable coefficient
More informationSynthesis and Evaluation of Electrocatalysts for Fuel Cells
Synthesis and Evaluation of Electrocatalysts for Fuel Cells Jingguang Chen Center for Catalytic Science and Technology (CCST) Department of Chemical Engineering University of Delaware Newark, DE 19711
More informationIBC Technology Overview: NCMS - SET
IBC Technology Overview: NCMS - SET Solomon Berman, President / CEO Elgin R Miller, Principal Materials Engineer October 10, 2017 IBC Materials & Technologies 902 Hendricks Drive, Lebanon, IN 46052 www.ibcmaterials.com
More informationP25 Surface Engineering
Updated: 03/29/2016 Syllabus for P25 Surface Engineering Credits Examiner Contact Target group Fee for industrial members Prerequisites 7.5 credits Shrikant Joshi, University West Shrikant Joshi shrikant.joshi@hv.se
More informationChapter 16 Corrosion and Degradation of Materials
Chapter 16 Corrosion and Degradation of Materials Concept Check 16.1 Question: Would you expect iron to corrode in water of high purity? Why or why not? Answer: Iron would not corrode in water of high
More informationLect. 2: Basics of Si Technology
Unit processes Thin Film Deposition Etching Ion Implantation Photolithography Chemical Mechanical Polishing 1. Thin Film Deposition Layer of materials ranging from fractions of nanometer to several micro-meters
More informationEVALUATION OF ADHESION, HARDNESS AND MICROSTRUCTURE OF CrN e CrAlN COATINGS DEPOSITED BY HIGH POWER IMPULSE MAGNETRON SPUTTERING
EVALUATION OF ADHESION, HARDNESS AND MICROSTRUCTURE OF e CrAlN COATINGS DEPOSITED BY HIGH POWER IMPULSE MAGNETRON SPUTTERING Bruno César Noronha Marques de Castilho, Mechanical Engineering - Materials,
More informationCzochralski Crystal Growth
Czochralski Crystal Growth Crystal Pulling Crystal Ingots Shaping and Polishing 300 mm wafer 1 2 Advantage of larger diameter wafers Wafer area larger Chip area larger 3 4 Large-Diameter Wafer Handling
More informationPast, Present and Future of the Republic Center for Structure Researches of Georgian Technical University
Head of the Center Professor Elguja Kutelia Past, Present and Future of the Republic Center for Structure Researches of Georgian Technical University Outlook New generation nano-porous brake pads New ADI
More informationHandbook Of Thin Film Deposition Processes And Techniques (materials And Processing Technology)
Handbook Of Thin Film Deposition Processes And Techniques (materials And Processing Technology) R. Glang, in: Handbook of Thin Film Technology (L. I. Maissel and R. Glang, eds.) T. A. Delchar, Vacuum Physics
More informationNEW MATERIALS CREATING OPTIONS FOR OUR FUTURE
NEW MATERIALS CREATING OPTIONS FOR OUR FUTURE SC 208 APRIL 5, 2016 JOHN BUSH OUTLINE OF CLASS CONTENT Introduction to material science/engineering Some materials frontiers Logic of materials development
More informationPrevious Lecture. Vacuum & Plasma systems for. Dry etching
Previous Lecture Vacuum & Plasma systems for Dry etching Lecture 9: Evaporation & sputtering Objectives From this evaporation lecture you will learn: Evaporator system layout & parts Vapor pressure Crucible
More informationTHE INFLUENCE OF NITROGEN CONTENT ON THE MECHANICAL PROPERTIES OF TiN x THIN FILMS PREPARED BY REACTIVE MAGNETRON SPUTTERING
Bulletin of the Transilvania University of Braşov Series I: Engineering Sciences Vol. 5 (54) No. 2-2012 THE INFLUENCE OF NITROGEN CONTENT ON THE MECHANICAL PROPERTIES OF TiN x THIN FILMS PREPARED BY REACTIVE
More informationSummary and Scope for further study
Chapter 6 Summary and Scope for further study 6.1 Summary of the present study Transparent electronics is an emerging science and technology field concentrated on fabricating invisible electronic circuits
More informationMaterials of Engineering ENGR 151 CORROSION ELECTRICAL PROPERTIES
Materials of Engineering ENGR 151 CORROSION ELECTRICAL PROPERTIES more anodic (active) more cathodic (inert) GALVANIC SERIES Ranking of the reactivity of metals/alloys in seawater Platinum Gold Graphite
More informationFabrication of Highly Ordered Al 2 O 3 Nanohole Arrays As a Nanostructured Template
Fabrication of Highly Ordered Al 2 O 3 Nanohole Arrays As a Nanostructured Template Jie Gong, Bill Butler and Giovanni Zangari Materials Science Program University of Alabama at Tuscaloosa This work was
More informationLaser Processing on Graphite
Laser Processing on Graphite MSE 503 Seminar - Fall 2009 08-27-2009 CLA Conference Room, UT Space Institute, Tullahoma, TN - 37388, USA Deepak Rajput Graduate Research Assistant Center for Laser Applications
More informationMotivation: Biofunctional Composite Nanoparticles
1 Motivation: Biofunctional Composite Nanoparticles Iron Oxide Core Magnetic core Alternating magnetic field Brownian and Neél relaxation Bi-Material Composites MRI contrast enhancement and RF thermal
More informationMETAL FINISHING. (As per revised VTU syllabus: )
METAL FINISHING (As per revised VTU syllabus: 2015-16) Definition: It is a process in which a specimen metal (article) is coated with another metal or a polymer in order to modify the surface properties
More informationCERTESS Carbon Diamond-like-Carbon (DLC) Tribological coatings Extreme Hardness + Very low friction = Exceptional Wear Resistance
www.hefusa.net sales@hefusa.net Carbon Diamond-like-Carbon (DLC) Tribological coatings Extreme Hardness + Very low friction = Exceptional Wear Resistance PVD Coatings Overview Physical Vapor Deposition
More informationBiomaterials in Medical device design
Biomaterials in Medical device design 1 Dr Joseph Buhagiar B. E n g ( H o n s. ) P h D ( B h a m ) D e p a r t m e n t o f M e t a l l u r g y a n d M a t e r i a l s E n g i n e e r i n g U n i v e r
More informationNano and functional material solutions for applications in energy sector
Nano and functional material solutions for applications in energy sector 29 November 2011 Dr. Pertti Kauranen VTT Technical Research Centre of Finland 2 Presentation outline 1. Materials and future energy
More informationCharacterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method
Journal of Mechanical Research and Application ISSN: 2251-7383, eissn: 2251-7391 Vol. 4, No. 2, 2012, 57-61 Characterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method JMRA
More informationIsrael Institute of Metals E-MRS Fall 2017
Israel Institute of Metals Technion Israel Institute of Technology Founded in 1912 18 faculties, ~60 research centers, 15K students 3 Noble prizes (Shechtman, Hershko and Ciechanover) 5 teaching campuses:
More informationGTV Spray powder catalogue
GTV Spray powder catalogue Application fields Overhaul / Repair Wear protection Corrosion protection Bond Coats Electrical isolation Thermal isolation Clearance control (Abradable coatings) Powder morphology
More information1 MARCH 2017 FILM DEPOSITION NANOTECHNOLOGY
1 MARCH 2017 FILM DEPOSITION NANOTECHNOLOGY PRESENTATION Pedro C. Feijoo E-mail: PedroCarlos.Feijoo@uab.cat FABRICATION TECHNOLOGIES FOR NANOELECTRONIC DEVICES. PEDRO C. FEIJOO 2 FILM GROWTH Chemical vapor
More informationPowder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering
Powder Metallurgy Science, Technology and Materials Anish Upadhyaya Associate Professor Department of Materials Science and Engineering Indian Institute of Technology Kanpur, India G S Upadhyaya Former
More informationJ. B. Bates, Xiaohua Yu, C. F. Luck, and N. J. Dudney
C/ORNL 90 0038 CRADA Final Report for CRADA Number ORNL90-0038 DEVELOPMENT OF A LITHIUM MICROBATTERY PACKAGING TECHNOLOGY ERKTSOl J. B. Bates, Xiaohua Yu, C. F. Luck, and N. J. Dudney Oak Ridge National
More informationtion band derived electrons. Achieving high performance p-type oxide TFTswilldefinitelypromoteaneweraforelectronicsinrigidandflexible substrate away
Preface Thin film transistor (TFT) is a combination of thin films necessary to create the function of a transistor. It consists of a thin film of a semiconducting material which forms the conducting channel
More informationBearings for Extreme Special Environments (6) Present State and Future Trend of Koyo EXSEV Bearing
Bearings for Extreme Special Environments (6) Present State and Future Trend of Koyo EXSEV Bearing H. TAKEBAYASHI Outlines of Koyo EXSEV bearing series (bearings for extreme special environments) have
More information1-Materials Science & Materials Engineering
1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic
More informationA Basic Introduction to Thin-Film Coatings. From the Experts at VaporTech
A Basic Introduction to Thin-Film Coatings From the Experts at VaporTech What are thin-film coatings? 2018 Vapor Technologies, Inc. All rights reserved. Thin-film coatings Physical or Chemical Vapor Deposition
More informationWHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS
WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS Design by ex nihilo APPLICATIONS Durable and profitable products and processes
More informationAluminum Alloys GOTChA Chart
Aluminum Alloys GOTChA Chart Goals High Strength Intrinsically Corrosion Resistant Aluminum Alloys for Enhanced Readiness, Improved Performance and Lower Life Cycle Costs Objectives SCC improvements-alloy
More informationEmbedded Passives..con0nued
Embedded Passives..con0nued Why Embedded Passives? Improves the packaging efficiency System-on-Package (SOP); SLIM integration Reducing size Eliminating substrate assembly Minimizing solder joint failure
More informationAtomic Layer Deposition (ALD)
Atomic Layer Deposition (ALD) ALD provides Uniform, controlled, conformal deposition of oxide, nitride, and metal thin films on a nanometer scale. ALD is a self limiting thin film deposition technique
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: December 31, 2017 Certificate Number: 2633.01 In recognition of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 CHEMICAL Valid To: November 30, 2017 Certificate Number: 2633.02 In recognition of the
More informationLecture 16: Surface Processing
MSE 440/540: Processing of Metallic Materials Instructors: Yuntian Zhu Office: 308 RBII Ph: 513-0559 ytzhu@ncsu.edu Lecture 16: Surface Processing Department of Materials Science and Engineering 1 Surface
More informationManufacturing Technologies for MEMS and SMART SENSORS
4 Manufacturing Technologies for MEMS and SMART SENSORS Dr. H. K. Verma Distinguished Professor (EEE) Sharda University, Greater Noida (Formerly: Deputy Director and Professor of Instrumentation Indian
More informationPlasma Spray Coating. Principles and Applications WILEY- WILEY-VCH Verlag GmbH & Co. KGaA. Robert B. Heimann VCH
Robert B. Heimann Plasma Spray Coating Principles and Applications Second, Completely Revised and Enlarged Edition WILEY- VCH WILEY-VCH Verlag GmbH & Co. KGaA Contents Preface XIII Preface to the First
More informationCHAPTER-VII SUMMARY AND CONCLUSIONS
CHAPTER-VII SUMMARY AND CONCLUSIONS Chapter-VII Summary and Conclusions Sr. No. Title Page No. 7.1 Summary 167 7.2 Conclusions.. 171 CHAPTER SEVEN Summary and Conclusions 7.1: Summary The technologies
More informationNano-Structured Alloy and Composite Coatings for High Temperature Applications
Vol. Materials 7, No. Research, 1, 2004 Vol. 7, No. 1, 175-182, Nano-Structured 2004. Alloy and Composite Coatings for High Temperature Applications 2004 175 Nano-Structured Alloy and Composite Coatings
More informationAvailable online at Fatigue Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application
Available online at www.sciencedirect.com Procedia Procedia Engineering Engineering 2 (2010) 00 (2009) 1617 1623 000 000 Procedia Engineering www.elsevier.com/locate/procedia Fatigue 2010 Fatigue in AISI
More informationChulalongkorn University, Bangkok, Thailand. Chulalongkorn University, Bangkok, Thailand; Abstract
Journal of Metals, Materials and Minerals. Vol.16 No.2 pp.25-31, 2006 The Effect of Long-Term Thermal Exposure at Elevated Temperatures on Microstructures and Mechanical Properties in Centrifugally Casted
More informationMaterial Product Data Sheet Tungsten Carbide Nickel Chromium Self-Fluxing Powders
Material Product Data Sheet Tungsten Carbide Nickel Chromium Self-Fluxing Powders Thermal Spray Powder Products: Metco 31C-NS, Metco 32C, Metco 34F, Metco 34FP, Metco 36C, WOKA 7701, WOKA 7702, WOKA 7703,
More informationEFFECT OF SELECTED TYPES OF COATING ON FATIGUE PROPERTIES OF NITRIDED STEEL. Ivo ČERNÝ, Dagmar MIKULOVÁ
EFFECT OF SELECTED TYPES OF COATING ON FATIGUE PROPERTIES OF NITRIDED STEEL Ivo ČERNÝ, Dagmar MIKULOVÁ SVÚM, a.s., Podnikatelská 565, 190 11 Praha 9 Běchovice, Czech Republic, Ivo.Cerny@seznam.cz Abstract
More informationCOMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Ceramic Materials
More informationSafety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
More informationPhysical Vapor Deposition (PVD) Zheng Yang
Physical Vapor Deposition (PVD) Zheng Yang ERF 3017, email: yangzhen@uic.edu Page 1 Major Fabrication Steps in MOS Process Flow UV light Mask oxygen Silicon dioxide photoresist exposed photoresist oxide
More informationNational Nano Fabrication Centre (NNFC)
National Nano Fabrication Centre (NNFC) Tool and Process Capabilities 1. Lithography 1.1 Direct Laser Writer/Lithography 1.1.1 Preferred Design file format: GDS2 or CIF 1.1.2 Please note that coloured
More informationEFFECTS OF CURRENT DENSITY ON SIZE AND SURFACE MORPHOLOGY OF HIGH SPEED DIRECT NANO-CRYSTALLINE NICKEL PLATING ON TITANIUM SURFACE
EFFECTS OF CURRENT DENSITY ON SIZE AND SURFACE MORPHOLOGY OF HIGH SPEED DIRECT NANO-CRYSTALLINE NICKEL PLATING ON TITANIUM SURFACE Noor Zaimah 1, Azieyanti Nurain 1 and Sakhawat Hussain 2 1 Department
More information