XTRAWELD 2 XTRAWELD 2 - DRUM PACK. Classification: AWS A5.18 ER70S-6 EN ISO G3Si1 Approvals: LR H15, ABS 2SA, DNV, BV

Transcription

1 MIG / MAG WIRE

2 XTRAWELD 2 Xtraweld 2 is premium grade mild steel MIG/MAG welding wire, produced from high quality deoxidized mig rod, the product is copper coated to increase shelf life and feeding ability, precision layer wound, use with shielding gas such as O2 at 15-20L/min, argon O2 mixture at 10-15L/min. AW A5.18 ER70-6 EN IO G31 Approvals: LR H15, AB 2A, DNV, BV u 8 Typical use with O2 gas Tensile trength Yield trength Mpa 450 Mpa Elongation 28% harpy V-Notch at 20 harpy V-Notch at J 60J 0.6 5kg kg kg Kg kg kg kg kg Xtraweld 2 drum pack is a MIG/MAG wire system designed to enchance the performance of automated welding system, using unique reverse twist coiling method, to ensure the wire from drum virtually straight and twist free. Every drum pack used will same approximatly 3 hours downtime. XTRAWELD 2 - DRUM AK AW A5.18 ER70-6 EN IO G31 Approvals: LR H15, AB 2A, DNV, BV Optional: one set ode: u 8 Typical use with O2 gas Tensile trength Mpa 2 Yield trength 450 Mpa Elongation 28% harpy V-Notch at J harpy V-Notch at J kg kg kg

3 A low alloy steel welding wire containing, and V. The wire is copper coated, used for welding high tensile strength up to 930 Mpa. Gas flow rate 14-16L/min XTRAWELD 648 AW A5.28 ER100-G r V u 0.3 Tensile Ma Yield Ma Elongation - 22% kg kg kg TAINLUX 316L ER316L Mig wire is used for bearing austenitic stainless steel with 1.5-3%. 316/316L type stainless steel are for good resistance of pitting, acid and general corrosion. AW A5.9 ER316L r Tensile Ma Yield Ma Elongation - 40% kg kg kg kg TAINLUX 308L ER308L Mig wire is used for welding 301, 302, 303, 304 grades stainless steel. Mainly used in brewery, food, arthitectural and general fabrication. AW A5.9 ER308L r Tensile Ma Yield Ma Elongation - 40% kg kg kg kg

4 ER309L Mig wire is used for wedling in high dilution conditions, dissimilar weld, buffer layers. TAINLUX 309L AW A5.9 ER309L r Tensile Ma Yield Ma Elongation - 40% kg kg kg kg TAINLUX 307 ER307 is suitable for joining of armour plate, ferritic r stainless steel and dissimilar steels. so suitable for buffer layering prior to hardfacing. AW A5.9 ER r Tensile Ma Yield Ma Elongation - 30% kg kg TAINLUX 310 ER310 are used for welding 25%r,20% (310) type of alloys. The high alloy content gives resistance up to 1200 for heat shields, furnace and ducting parts. AW A5.9 ER r Tensile Ma Yield Ma Elongation - 27% kg

5 TAINLUX 312 ER312 is used for welding known and unknown chemical specifications, dissimilar materials. Weld deposit work hardens and give good wear resistance. AW A5.9 ER r Tensile Ma Yield Ma Elongation - 26% kg TAINLUX 410 ER410 is used for welding 13%r stainless steel such as 403 and 410 types. Heat treatable, used for machines parts and pump shafts. AW A5.9 ER r Tensile Ma Yield Ma Elongation - 33% kg ALUWELD 4043 ALUWELD 4043 is a 95% aluminium, 5% silicon welding wire suitable for welding heat treatable base alloys of the 6XXX series. Has lower melting point. so suitable for spray arc and pulsed arc transfer. Application in the construction and automotive industry. AW A5.10 ER4043 5% Tensile Ma Yield - 40 Ma Elongation - 8% 1.0 7kg kg kg

6 ALUWELD 5356 is a 95% aluminium, 5% magnesium welding wire suitable for general purpsoe welding of the 5XXX series alloys. so suitable for spray arc and pulsed arc transfer. Application in shipping, bulk container, railway, and automotive industry. ALUWELD 5356 AW A5.10 ER Tensile Ma Yield Ma Elongation - 18% 1.0 7kg kg kg ALUWELD 1100 ALUWELD is a high quality pure aluminium wire with 99.50% aluminium. uitable for spray arc and pulsed arc transfer. Application in electronic, electrical, construction, equipments for food, chemical, brewing industry. AW A5.10 ER Tensile - 65 Ma Yield - 20 Ma Elongation - 35% 1.2 7kg kg ILION BRONZE 211 licon Bronze is a pure copper filler wire with 3% silicon for welding wide range of copper alloys. Application include wire for electrical components, tubes and heat exchanges, mig brazing for automotive body panels. AW A5.7 ERu-A u Tensile Ma Elongation - 38% Hardness HB 0.8 5kg kg

7 215 uminium Bronze A2 is a copper filler wire containing 10% aluminium, 1% iron. an be used for joining dissimilar alloys. eg, copper to steel, copper to cast iron, brass to steel etc. Application include corrision resistant pumps, casting, machinery parts for offshore, marine and mining industry. AW A5.7 ERu-A2 215 ALUMINIUM BRONZE A2 10% 0.8% 1.0% u Tensile Ma Elongation - 45% Hardness HB kg Deoxidized opper is a filler wire for welding pure copper when maximum thermal and electrical conductivity are required. Application include plate for chemial plant and moulds,rods and wires for electrical components, tubes for heat exchangers. 201 DEOXIDIZED OER AW A5.7 ERu u 98% % % Tensile Ma Hardness HB kg XTRAOR 71 Xtracor 71 is a rutile type O2 shielded flux cored wire for welding of / steel. Recommened for all positional welding. Widely used in general engineering workshop. Use with O 2 Gas AW A5.20 E71T Tensile Ma Yield Ma Elongation - 28% kg kg

8 E71T11 is a gasless, open-arc, tubular wire which is easy to use. Recommended to use with smaller Mig welder or areas where gas cylinder is not practical. E71T11 GALE AW A5.20 E71T Tensile Ma Yield Ma Elongation - 23% 0.9 1kg kg kg kg LADOR 50 ladcor 50 is a self-shielded flux cored wire depositing a high chrome carbide alloy steel. It used to overlay surface subject to severe abrasion, moderate impact. Application for bucket teeth and lips, cement chutes, coal feeder screw, conveyor screw, crush jaws, dragline buckets etc. DIN 8555 MF10-GF-55-G r 26.5 Hardness - HR kg LADOR 60 ladcor 60 is a self-shielded flux cored wire depositing an extra high chrome carbide alloy steel. It used to overlay surface subject to extremely severe abrasion, not suggested to use with severe impact. Application for sugar cane hammer & knives, mining machinery, buckets, dipper teeth, coal crusher etc. DIN 8555 MF6-GF-60-G r Hardness - HR kg