Water and stainless steel

Size: px
Start display at page:

Download "Water and stainless steel"

Transcription

1 Water and stainless steel

2 Water is not just necessary for life water is life. St Exupéry With this in mind, Ugitech modestly aims to meet the challenge to provide the water industry with innovative and environmentally friendly stainless steel solutions. Whether for drinking water treatment, wastewater treatment, salt water desalination, or water transport and storage applications, stainless steel can offer very attractive solutions. Its superior corrosion resistance, excellent mechanical properties, chemical and biological neutrality, and recyclability all represent major benefits. Ugitech's product offer: recommendations Our products Because the equipment used in the water industry is extremely diverse, Ugitech offers you a wide range of stainless steel products available in different formats: > Semi-finished products (square billets) > Round, hexagonal and square bars > Round and hexagonal wire rod > Wire (for welding) > Profiles (for filtration) Our brands Because the type of water to be treated also varies, Ugitech offers you a wide choice of stainless steel grades. Among these grades, Ugitech has made a special selection of grades perfectly adapted to the water industries that are both high performing and economical:

3 UGIMA Traditional stainless steels (304L, 316L ) with improved machinability, to boost productivity by 10 to 20% and increase equipment lifetimes (multiplied by 2 to 5). Commercial brand name EN reference UNS reference (AISI/ASTM) UGIMA 4307 = UGIMA 304L UGIMA 4307HM = UGIMA 304LXL UGIMA 4404 = UGIMA 316L UGIMA 4404HM = UGIMA 316LXL L L UGIMA 4435 = UGIMA 316 LMo L High Ni/Mo UGIMA Turning speeds - Vb15/0.15 (m/min) UGI 4307 IMA 4307 IMA 4307 HM UGI 4404 The effect of UGIMA (IMA) and UGIMA2 (HM) on the machinability of different grades IMA 4404 IMA 4404HM UGI 4435 IMA 4435 UGI 4571 Grades IMA 4571 UGIPLEX Stainless steels of superior technical quality, with properties (corrosion resistance, mechanical properties) at least equivalent to those of the traditional grades (304L, 316L, 904L), available at a lower and more stable price. Commercial brand name EN reference UGI 4062 = UGI 25N - UGI 4362 = UGI 35N UGI 4462 = UGI 45N UGI 4507 = UGI 52N Corrosion resistance L L L Price

4 Ugitech's recommendations: Grade usage ranges for the water industries Drinking water Pitting corrosion test in a "Drinking Water" environment Resistance to pitting corrosion: Pitting potential (mv/ecs) * 4435* 4571* 4404* No corrosion observed beyond this limit Mechanical properties: Rp0.2 (Mpa) Test conditions: NaCl 0,02M (0,12% ; 0,116g/L)/23 C/pH7 * Available in UGIMA and/or UGIMA2 versions

5 Salt water Pitting corrosion test in a "Salt Water" environment Resistance to pitting corrosion: Pitting potential (mv/ecs) * 4571* 4404* No corrosion observed beyond this limit Mechanical properties: Rp0.2 (Mpa) Test conditions: NaCl 0,86M (5% ; 50g/L)/35 C/pH6 * Available in UGIMA and/or UGIMA2 versions Crevice corrosion test in a "Salt Water" environment Resistance to crevice corrosion: Critical crevice temperature ( C) * * 4404* Mechanical properties: Rp0.2 (Mpa) Test conditions: to ASTM G48 Standard in a 6% ferric-chloride solution * Available in UGIMA and/or UGIMA2 versions Receive customized technical advice Are you designing a new part? Do you need a specific product or a specific grade? Do you need technical support with your first use of stainless steel or to switch grades? Don't hesitate to contact our local technical representatives who will help you find the best stainless steel solution for your products.

6 production plants Bars Avenue Paul Girod UGINE Cedex Tel. +33 (0) Fax: +33 (0) Italia Via G. Di Vittorio, 34/ PESCHIERA BORROMEO (MI) ITALY Tel Fax: Wire rod Avenue Paul Girod UGINE Cedex Tel. +33 (0) Fax: +33 (0) Drawn wire BP IMPHY Tel. +33 (0) Fax: +33 (0) Petite Rue Volais BP BRIONNE Tel. +33 (0) Fax: +33 (0) , Chemin de Majornas BP BOURG-EN-BRESSE Tel. +33 (0) Fax: +33 (0) SPRINT METAL Edelstahlziehereien GmbH Eckenhagener Strasse REICHSHOF - Pochwerk GERMANY Tel. +49 (0) Fax: +49 (0) a team of 2000 working together for you around the world Your contact Water Marketing Manager Tel. +33 (0) Fax : +33 (0) Imprimeurs : Dumas & Titoulet Photo credits: Ugitech - non-contractual document - 02/11 - D7860

UGITECH production plants. Water and stainless steel. UGITECH a team of 2000 working together for you around the world. Your UGITECH contact

UGITECH production plants. Water and stainless steel. UGITECH a team of 2000 working together for you around the world. Your UGITECH contact Salt water Bars Wire rod Fax: +33 ()4 79 89 34 34 Fax: +33 ()4 79 89 34 34 Italia Via G. Di Vittorio, 34/36 68 PESCHIERA BORROMEO (MI) ITALY Tel. +39 2 54 74 34 14 Fax: +39 2 54 74 34 3 Drawn wire production

More information

UGITECH production plants

UGITECH production plants production plants Bars Avenue Paul Girod 73403 UGINE Cedex Tel. +33 (0)4 79 89 30 30 Fax: +33 (0)4 79 89 34 34 Italia Via G. Di Vittorio, 34/36 20068 PESCHIERA BORROMEO (MI) ITALY Tel. +39 02 54 74 34

More information

Dairy Product Industries Stainless Solutions

Dairy Product Industries Stainless Solutions Dairy Product Industries Stainless Solutions Which grades for which equipment? Equipment End market Stainless portion Temperature ( C) Tank with stirer All dairy products Stirer, cover hinges and handles,

More information

Ugitech Stainless steel solutions for the oil and gas industry

Ugitech Stainless steel solutions for the oil and gas industry Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously

More information

C Si Mn Ni Cr Mo Nb N V P S max 0.75 max max 0.03 max

C Si Mn Ni Cr Mo Nb N V P S max 0.75 max max 0.03 max General presentation An austenitic stainless steel with high corrosion resistance and superior mechanical performances. UGI 209 is an austenitic stainless steel with a high yield strength designed for

More information

Medical applications Opt for a stainless steel health

Medical applications Opt for a stainless steel health Medical applications Opt for a stainless steel health Ugitech: your partner for stainless steel health Ugitech produces stainless steels and alloys in the form of bar and wire rod: raw materials for your

More information

C Si Mn Ni Cr Cu Mo N P S

C Si Mn Ni Cr Cu Mo N P S 0.03 1.0 2.0 2.0 2.8 22.0 23.8 0.50 0.45 0.16 0.26 0.040 0.010 General presentation is an austenitic-ferritic or duplex stainless steel with a minimum content of 22 % chromium and 2 % nickel, specially

More information

45N austénitics. PREN = Cr + 3.3Mo + 16N S I

45N austénitics. PREN = Cr + 3.3Mo + 16N S I Min YS (Mpa).3 1., 3,5 5,5. 4..1.6.1.6.5..35,15 General presentation Mechanical properties in bars (YS & UTS) are better than those of 316L and also those of 316LN Better Corrosion Resistance than that

More information

C Si Mn Cr P S N Nb <0.030 <1.0 < to 18 <0.040 <0.030 < xC to 0.6

C Si Mn Cr P S N Nb <0.030 <1.0 < to 18 <0.040 <0.030 < xC to 0.6 General overview UGIMA 4511 is an improved machinability niobium-stabilised ferritic stainless steel containing between 16 and 17% chromium. Apart from good corrosion resistance, this grade is characterised

More information

Stainless Steel Machining

Stainless Steel Machining Stainless Steel Machining 1 Table of contents UGITECH in few words. Stainless steel machinability : Definition & Criteria Role of Inclusions. (Sulphides, Oxides, UGIMA Oxides) Machinability Comparisons

More information

C Si Mn Cr Mo Cu Ni P S

C Si Mn Cr Mo Cu Ni P S 1 General presentation: is a re-sulphurised ferritic stainless steel containing 12% chromium and an addition of silicon. This grade, which was developed for magnetic applications, has high permeability

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

Free Machining Martensitic stainless steel. Oxidation resistance in continuous service to 1200 F (650 C).

Free Machining Martensitic stainless steel. Oxidation resistance in continuous service to 1200 F (650 C). Description 416 is a free machining martensitic grade. The unique production process developed exclusively by Ugitech results in a product that delivers superior productivity and tool life, and improves

More information

Stainless Steel Bar

Stainless Steel Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

SANDVIK SPRINGFLEX SF SPRING WIRE WIRE

SANDVIK SPRINGFLEX SF SPRING WIRE WIRE SANDVIK SPRINGFLEX SF SPRING WIRE WIRE DATASHEET Sandvik Springflex SF is a duplex (austenitic-ferritic) stainless steel especially designed for spring applications with extremely high fatigue requirements.

More information

Typical Analysis % C Si Mn P S Cr Ni Mo Cu Nb+Ta. Minimum Maximum

Typical Analysis % C Si Mn P S Cr Ni Mo Cu Nb+Ta. Minimum Maximum COMPARABLE STANDARD Typical Analysis % C Si Mn P S Cr Ni Mo Cu Nb+Ta Minimum 15.0-3.0-3.0-0.15 - Maximum 0.07 1.00 1.00 0.040 0.030 17.5 5.0 0.50 5.0 0.45 DESCRIPTION 630 UGIMA is an improved machining

More information

Identification. Type Analysis

Identification. Type Analysis Page 1 of 16 Unit Display: Metric Print Now Custom 465 Stainless E-Mail Datasheet Add to My Materials Request More Information U.S. Patent Number Identification 5,681,528 5,855,844 UNS Number S46500 Type

More information

Stainless steels - Part 1: List of stainless steels

Stainless steels - Part 1: List of stainless steels Irish Standard I.S. EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels CEN 2014 No copying without NSAI permission except as permitted by copyright law. I.S. EN 10088-1:2014 Incorporating

More information

VDM Alloy 80 A Nicrofer 7520 Ti

VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.

More information

STRAINER BAGS FOR LIQUID FILTRATION. Gas AND LIQUID FILTRATION

STRAINER BAGS FOR LIQUID FILTRATION. Gas AND LIQUID FILTRATION STRAINER BAGS FOR LIQUID FILTRATION Gas AND LIQUID FILTRATION Series TPP-TPE filter bags. felt. size 1-2-3-4 CHARACTERISTICS Needle felt construction Fibre free surface treatment Silicon oil free Approved

More information

Identification. Type Analysis

Identification. Type Analysis Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur

More information

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC)

More information

Prodec 303/4305 EN , ASTM TYPE 303

Prodec 303/4305 EN , ASTM TYPE 303 Prodec 303/4305 EN 1.4305, ASTM TYPE 303 General characteristics Prodec 303/4305 is for applications that use 303/1.4305. It gives you faster machining, longer tool life, better tolerances, superior machined

More information

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS SANDVIK 3R65 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R65 is a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. STANDARDS ASTM: TP316L, TP316 UNS: S31603, S31600

More information

VDM NeutroShield Data Sheet No. 4060

VDM NeutroShield Data Sheet No. 4060 VDM NeutroShield Data Sheet No. 4060 December 2014 VDM NeutroShield Material Data Sheet No. 4060 VDM NeutroShield is an austenitic stainless steel which is alloyed with boron. Its chemical composition

More information

Stainless steels for mildly corrosive environments

Stainless steels for mildly corrosive environments Stainless steels for mildly corrosive environments Outokumpu Moda range outokumpu.com/moda We believe in a world that lasts forever Outokumpu is a global leader in the advanced materials business, creating

More information

Moda 430/4016 EN , ASTM TYPE 430 / UNS S43000

Moda 430/4016 EN , ASTM TYPE 430 / UNS S43000 Moda 430/4016 EN 1.4016, ASTM TYPE 430 / UNS S43000 General characteristics Moda 430/4016 is a classic 16 chromium ferritic stainless steel. Good corrosion resistance in mildly corrosive environments combined

More information

CROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS

CROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS CROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS YOUR PARTNER IN HYDRAULICS Cromax products from Ovako are the preferred choice for many hydraulic-cylinder manufacturers

More information

SANDVIK SPRINGFLEX STRIP STEEL

SANDVIK SPRINGFLEX STRIP STEEL SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex

More information

Our philosophy at your service

Our philosophy at your service CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox

More information

UR 2304: A 23Cr free Mo duplex stainless steel with PREN 24. C Cr Ni Mo N Thermal conductivity (W.m - 1.K - 1 ) Resistivity

UR 2304: A 23Cr free Mo duplex stainless steel with PREN 24. C Cr Ni Mo N Thermal conductivity (W.m - 1.K - 1 ) Resistivity Industeel UR 234 UR 234: A 23Cr free Mo duplex stainless steel with PREN 24 UR 234 is a 23% Cr, 4% Nickel, Mo free duplex stainless steel (234). The alloy UR 234 has a corrosion resistance similar to 36L.

More information

Thermal conductivity (W.m - 1.K - 1 )

Thermal conductivity (W.m - 1.K - 1 ) Industeel UR 2202 UR 2202: an alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows

More information

Chemical characteristics The chemical composition is shown in Table 1. Outokumpu EN ASTM

Chemical characteristics The chemical composition is shown in Table 1. Outokumpu EN ASTM for Bar Applications has a unique combination of characteristics (good corrosion properties, high strength and good machinability), which together with its relative price stability, makes it the material

More information

Sandvik SAF 2205 (Billets)

Sandvik SAF 2205 (Billets) Datasheet updated 2013 11 28 14:13:21 (supersedes all previous editions) Sandvik SAF 2205 (Billets) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by: High resistance

More information

ATI 13-8 Supertough. ATI 13-8 Supertough Alloy. Technical Data Sheet INTRODUCTION SPECIFICATIONS PHYSICAL PROPERTIES HEAT TREATMENT HARDNESS

ATI 13-8 Supertough. ATI 13-8 Supertough Alloy. Technical Data Sheet INTRODUCTION SPECIFICATIONS PHYSICAL PROPERTIES HEAT TREATMENT HARDNESS ATI 13-8 Supertough Alloy (UNS S13800) INTRODUCTION ATI 13-8 Supertough Alloy (UNS S13800) is a modification of the standard ATI 13-8 alloy, and has superior fracture toughness and Charpy impact energies,

More information

Hastelloy C-2000 (UNS N06200)

Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 is a versatile alloy that provides high resistance to variety of chemicals including sulfuric acid, hydrochloric acid and other strong acidic media. It offers

More information

Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211

Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211 Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar

More information

WELDING WIRES. Stainless Steel

WELDING WIRES. Stainless Steel BARS WIRES WELDING WIRES Stainless Steel WELDING WIRES Company Profile The Journey of Venus Group Branched out from its domestic trading division, in 1990, Venus started production of stainless steel bars

More information

SANDVIK SPRINGFLEX STRIP STEEL

SANDVIK SPRINGFLEX STRIP STEEL SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex

More information

Glossary of Steel Terms

Glossary of Steel Terms Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn

More information

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 17.4 PH VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 17.4 PH is a maraging martensitic stainless steel with Cu and Nb/Cb additions. The

More information

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Industeel URANUS 2202 The alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows

More information

A Heat Transfer Model for Ugitech s Continuous Casting Machine

A Heat Transfer Model for Ugitech s Continuous Casting Machine November 6 th 2008 Comsol Conference Hannover 2008 1 Presented at the COMSOL Conference 2008 Hannover A Heat Transfer Model for Ugitech s Continuous Casting Machine C. Deville-Cavellin A Heat Transfer

More information

SANDVIK 5R60 FOR WIRELINES WIRE

SANDVIK 5R60 FOR WIRELINES WIRE SANDVIK 5R60 FOR WIRELINES WIRE DATASHEET Sandvik 5R60 is an austenitic stainless steel alloy suitable for service in less severe oil and gas wells. The grade is characterized by: Good resistance to general

More information

Forta SDX 2507 EN , ASTM UNS S32750

Forta SDX 2507 EN , ASTM UNS S32750 Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely

More information

High-Quality Super Duplex Seamless Tubes for Umbilical Lines

High-Quality Super Duplex Seamless Tubes for Umbilical Lines High-Quality Super Duplex Seamless Tubes for Umbilical Lines High-Quality Super Duplex Seamless Tubes for Umbilical Lines Dynamic umbilical Hot Extrusion Process Umbilical connection system Static umbilical

More information

15-15HS Stainless. Identification

15-15HS Stainless. Identification Page 1 of 5 15-15HS Stainless U.S. Patent Number 5,094,812 Identification Unit Display: English Print Now E-Mail Datasheet Add to My Materials Type Analysis Carbon (Maximum) 0.04 % Manganese 16.00 to 19.00

More information

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 15.5 PH VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 15.5 PH is a precipitation hardening martensitic stainless steel with 15% Cr, 5% Ni,

More information

UR 317LN : A 3% Mo austenitic stainless steel with Nitrogen addition (317LN grade) Thermal conductivity (W.m - 1.K - 1 ) Resistivity

UR 317LN : A 3% Mo austenitic stainless steel with Nitrogen addition (317LN grade) Thermal conductivity (W.m - 1.K - 1 ) Resistivity Indu UR 317LN UR 317LN : A 3% Mo austenitic stainless with Nitrogen addition (317LN grade) UR 317LN is a nitrogen alloyed austenitic stainless with a 3% Mo addition. Its austenitic microstructure is free

More information

Ultra 904L EN , ASTM UNS N08904

Ultra 904L EN , ASTM UNS N08904 Ultra 904L EN 1.4539, ASTM UNS N08904 General characteristics High Ni and Mo austenitic grade with very high resistance to corrosion. Commonly used in chemical and petrochemical industry for handling medium

More information

Industry news. Recent findings on pitting and crevice corrosion: comparing SAF 2707 HD

Industry news. Recent findings on pitting and crevice corrosion: comparing SAF 2707 HD Recent findings on pitting and crevice corrosion: comparing SAF 2707 HD a cura di: Alessandra Spaghetti alessandra.spaghetti@sandvik.com - Sandvik Materials Technology INTRODUCTION Hyper-duplex is a grade

More information

Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. FAX: MOBILE: MSN :

Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. FAX: MOBILE: MSN : Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. WEB:www.Getwick.cn TEL:+86-917-3637501 FAX:+86-917-3637508 MOBILE: +86-18291726950 MSN : getwick@msn.cn 1. Product name: titanium rod Material:

More information

RELIABLE PIPES & TUBES LTD.

RELIABLE PIPES & TUBES LTD. RELIABLE PIPES & TUBES LTD. OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel,

More information

SANICRO 29 FOR OCTG TUBE AND PIPE, SEAMLESS

SANICRO 29 FOR OCTG TUBE AND PIPE, SEAMLESS SANICRO 29 FOR OCTG TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 29 is a high-alloy austenitic stainless steel (CRA) for OCTG downhole applications in particularly corrosive conditions. The grade is characterized

More information

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark) INVR CONTROLLED EXPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION Invar is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and

More information

ASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423

ASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423 ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification

More information

Pure Water. Water treatment units for any application in hospitals and laboratories in standard or customised designs. Using water intelligently

Pure Water. Water treatment units for any application in hospitals and laboratories in standard or customised designs. Using water intelligently Process Water Technology Pure Water Water treatment units for any application in hospitals and laboratories in standard or customised designs. Using water intelligently Pure confidence Water treatment

More information

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS SANDVIK 6R44 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 6R44 is an austenitic, niobium-stabilized stainless chromium-nickel steel for use at temperatures up to 850 C (1560 F). STANDARDS ASTM: TP347, TP347H

More information

K44 K44. key for value. 18% chromium with molybdenum, titanium and niobium stabiliz ed > > > > Cooking and catering equipment > >

K44 K44. key for value. 18% chromium with molybdenum, titanium and niobium stabiliz ed > > > > Cooking and catering equipment > > KARA ferritic stainless steel offer grade 18% chromium with molybdenum, titanium and niobium stabiliz ed Chemical composition Elements C Si Mn Cr Mo Ti+Nb % 0.015 0. 0.30 17.70 1.85 5 Typical values European

More information

BRODER METALS GROUP HTS 316

BRODER METALS GROUP HTS 316 Broder Metals supply 316 and 316L stainless cold drawn in B8M Class 2, B8M Class 2B, A4-70 and A4-80. A4-70 and A4-80 are named by their minimum tensile strength to be met by the material (70 & 80) by

More information

Corroplast The ultimate stainless steel for all stainless plastic moulds

Corroplast The ultimate stainless steel for all stainless plastic moulds Corroplast The ultimate stainless steel for all stainless plastic moulds ALL STAINLESS - MOULD CONSTRUCTION All stainless - mould construction The current trend in plastic mould manufacturing is towards

More information

Grades : SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347,

Grades : SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, Unifit MetalloysInc (UMI) is one of the leading Manufacturer, Exporter and Supplier of High Quality Stainless Steel Pipes & Tubes, Flanges, Pipe Fittings, Round Bars, Sheets and Plates Etc.Stainless steel

More information

Forta LDX 2101 EN , ASTM UNS S32101

Forta LDX 2101 EN , ASTM UNS S32101 Forta LDX 2101 EN 1.4162, ASTM UNS S32101 General characteristics Forta LDX 2101 is a lean-alloyed duplex product with good resistance to localized and uniform corrosion, as well as stress corrosion cracking,

More information

SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS

SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R12 is an austenitic stainless chromium-nickel steel with a low carbon content used for medical and dental instruments.

More information

Welding Consumables for Lean Duplex Stainless Steels

Welding Consumables for Lean Duplex Stainless Steels Welding Consumables for Lean Duplex Stainless Steels Graham Holloway, Adam Marshall & Zhuyao Zhang Metrode Products Ltd, UK Presenter: Presenter - Graham Holloway Graham Holloway has been at Metrode Products

More information

WIRELINES and WELL-SERVICE STRANDS

WIRELINES and WELL-SERVICE STRANDS WIRELINES and WELL-SERVICE STRANDS High quality wire and strand for the oil and gas industry. Wirelines Minimum Breaking Loads Diameter in mm HT Carbon EHT Carbon ZERON 100VHX 0.092 2.34 1,950 1,980 1,350

More information

SANDVIK 3R60 TUBE AND PIPE, SEAMLESS

SANDVIK 3R60 TUBE AND PIPE, SEAMLESS SANDVIK 3R60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R60 is an austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content. Sandvik 3R60 is also available in a variant for

More information

Novelis stands for excellent quality, with consistently reproducible products manufactured in our network of world-class Coil Coating facilities.

Novelis stands for excellent quality, with consistently reproducible products manufactured in our network of world-class Coil Coating facilities. Novelis Novelis is the world leader in aluminium rolling and recycling, producing an estimated 19 percent of the world's flat-rolled aluminium products. We are the No. 1 rolled products producer in Europe,

More information

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark) INVR CONTROLLD XPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION INVR is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and

More information

» UNS S41000» ASTM A276» ASTM A484» ASTM E381. » Hunting Rifles» Tactical Rifles» Competition Rifles» Pistol Barrels

» UNS S41000» ASTM A276» ASTM A484» ASTM E381. » Hunting Rifles» Tactical Rifles» Competition Rifles» Pistol Barrels COMPARABLE STANDARD Typical Analysis % C Si Mn P S Cr Ni Minimum 11.50 Maximum 0.15 0.60 1.00 0.040 0.03 12.50 0.75 DESCRIPTION Ugitech s 410RS is a pre-hardened chrome bearing martensitic stainless steel

More information

Sandvik 316 (Plate and sheet)

Sandvik 316 (Plate and sheet) Datasheet updated 2014 01 29 12:21:53 (supersedes all previous editions) Sandvik 316 (Plate and sheet) Sandvik 316 is a molybdenum alloyed austenitic chromium nickel steel. STANDARDS ASTM 316 UNS S31600

More information

Products for: -Resistance Welding Electrodes -Electrical Contact Material

Products for: -Resistance Welding Electrodes -Electrical Contact Material AMPCO Sintered Alloys Products for: -Resistance Welding Electrodes -Electrical Contact Material Product Definition & Uses The high electrical and thermal conductivity of copper is combined with arc-resistant

More information

Capital Equipment Preservation -Corrosion Control

Capital Equipment Preservation -Corrosion Control Capital Equipment Preservation -Corrosion Control Preet M. Singh School of Materials Science and Engineering & Institute of Paper Science and Technology Georgia Institute Technology, Atlanta, GA IPST Executive

More information

VDM Alloy 22 Nicrofer 5621 hmow

VDM Alloy 22 Nicrofer 5621 hmow VDM Alloy 22 Nicrofer 5621 hmow Material Data Sheet No. 4121 March 2018 March 2018 VDM Alloy 22 2 VDM Alloy 22 Nicrofer 5621 hmow VDM Alloy 22 is a nickel-chromium-molybdenum alloy with tungsten and extremely

More information

HASTELLOY B-2 ALLOY CORROSION-RESISTANT ALLOYS

HASTELLOY B-2 ALLOY CORROSION-RESISTANT ALLOYS CORROSION-RESISTANT ALLOYS HASTELLOY B-2 ALLOY A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded condition. Contents Principal Features 3 Chemical

More information

SEAMLESS STEEL LINE PIPE

SEAMLESS STEEL LINE PIPE www.nipponsteel.com SEAMLESS STEEL LINE PIPE Pipes & Tubes 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201904f 2019 CONTENTS INTRODUCTION INTRODUCTION

More information

VDM Alloy 718 CTP Nicrofer 5219 Nb

VDM Alloy 718 CTP Nicrofer 5219 Nb VDM Alloy 718 CTP Nicrofer 5219 Nb Material Data Sheet No. 4127 September 2017 September 2017 VDM Alloy 718 CTP 2 VDM Alloy 718 CTP Nicrofer 5219 Nb VDM Alloy 718 CTP is an age-hardenable nickel-chromium-iron-molybdenum

More information

EHG stainless products: 2,500 tonnes in 3,000 dimensions in stock.

EHG stainless products: 2,500 tonnes in 3,000 dimensions in stock. EHG stainless products: 2,500 tonnes in 3,000 dimensions in stock. Excerpt from the EHG stainless stock program. Complete EHG stock program: We supply steel and metal. And we deliver solutions. EHG is

More information

Ultra 6XN EN , ASTM UNS N08926

Ultra 6XN EN , ASTM UNS N08926 Ultra 6XN EN 1.4529, ASTM UNS N08926 General characteristics 6% Mo, high Ni, and N alloyed austenitic grade with extremely high resistance to both uniform and localized corrosion. Commonly used in applications

More information

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_02_201708f

More information

AL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)

AL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735) AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.

More information

Additive Manufacturing Powder

Additive Manufacturing Powder Additive Manufacturing Powder Materials for the future. VDM Metals 3 Bespoke material solutions As a world market leader, VDM Metals benefits from decades of experience in the production of high-alloyed

More information

CROMONIMET STEEL LIMITED

CROMONIMET STEEL LIMITED +91-8048076501 CROMONIMET STEEL LIMITED https://www.indiamart.com/cromonimetsteel/pdf1.html We are a well- known Manufacturer, Exporter, Supplier and Importer of Stainless Steel Round Bar / Pipes and Tubes,

More information

Company. Hot rolling Cold rolling Cold drawing Laser fusion Davex. For further information, please visit us at

Company. Hot rolling Cold rolling Cold drawing Laser fusion Davex. For further information, please visit us at Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established in 1983 in Switzerland, Montanstahl has achieved a high level

More information

Sanmac 304/304L (Bar)

Sanmac 304/304L (Bar) Sandvik Materials Technology kehittää ja tuottaa pitkälle kehittyneitä ruostumattomia teräksiä, titaania ja muita erikoisseoksia. Aineslehti on päivitetty 2014 09 05 11:08:39 (tämä versio korvaa kaikki

More information

SCOPE OF ACCREDITATION

SCOPE OF ACCREDITATION Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION Exova Canada Inc.

More information

C Cr Ni Mn Mo N < 2 > Thermal conductivity (W m - 1 K - 1 ) Resistivity

C Cr Ni Mn Mo N < 2 > Thermal conductivity (W m - 1 K - 1 ) Resistivity Indu UR 316L UR 316L: A 2%Mo containing 18Cr - 1Ni austenitic stainless UR 316L is one of the basic grade of the stainless s range. The addition of molybdenum improves its resistance to pitting and crevice

More information

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance

More information

VATECH WABAG LIMITED Desalination Opens Challenges to Steel Industry

VATECH WABAG LIMITED Desalination Opens Challenges to Steel Industry VATECH WABAG LIMITED Desalination Opens Challenges to Steel Industry K. Syed Amir Basha Chief Technology Officer VA Tech Wabag Challenges to Steel Industry 2 Challenges to Steel Industry Factors driving

More information

The Great Universal Power

The Great Universal Power PERMANENT MAGNETISM The Great Universal Power Safety through power The idea that revolutionized the world The permanent-electro Magnetism The universe and all that surrounds us is influenced and regulated

More information

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS corrosion resistant alloys ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance

More information

SA/EN National Parts 2.1 The National Foreword and the National Annexes, if any, do not apply for SA/EN

SA/EN National Parts 2.1 The National Foreword and the National Annexes, if any, do not apply for SA/EN 12-131 SPECIFICATION FOR STAINLESS STEEL Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes.

More information

Zircadyne 702/705 - in Chloride Solutions

Zircadyne 702/705 - in Chloride Solutions Zircadyne 702/705 - in Chloride Solutions INTRODUCTION Chloride salt solutions, such as seawater, present a challenging environment for selecting materials with acceptable corrosion resistance. When exposed

More information

316Ti Stainless Steel, UNS S31635

316Ti Stainless Steel, UNS S31635 316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic

More information

AUTO-LINE HYGIENIC SELF-CLEANING FILTERS FOR IMPROVED PRODUCTIVITY AND HYGIENE IN THE FOOD INDUSTRY

AUTO-LINE HYGIENIC SELF-CLEANING FILTERS FOR IMPROVED PRODUCTIVITY AND HYGIENE IN THE FOOD INDUSTRY AUTO-LINE HYGIENIC SELF-CLEANING FILTERS FOR IMPROVED PRODUCTIVITY AND HYGIENE IN THE FOOD INDUSTRY Compliance with EC1935/2004 for materiels with food contact, registered by the national Danish Food Administration.

More information

EVALED AC. Vacuum evaporators powered by hot/cold water

EVALED AC. Vacuum evaporators powered by hot/cold water EVALED AC Vacuum evaporators powered by hot/cold water evaporators EVALED AC Solution represents the range of hot/cold water evaporators utilizing low cost energy sources, such as the ones from cogeneration

More information

by Nicole Micyus, * MacDermid, Inc. New Hudson, Michigan, USA

by Nicole Micyus, * MacDermid, Inc. New Hudson, Michigan, USA Corrosion Resistance of High Phosphorus Electroless Nickel with a Lower Coefficient of Friction, Nanoparticle Codeposition Electroless Nickel Layer by Nicole Micyus, * MacDermid, Inc. New Hudson, Michigan,

More information

PRESSURFECT CNG TUBE AND PIPE, SEAMLESS

PRESSURFECT CNG TUBE AND PIPE, SEAMLESS PRESSURFECT CNG TUBE AND PIPE, SEAMLESS DATASHEET Pressurfect CNG is a dual grade certified (ASTM 316/316L) austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content used for

More information