Product Catalogue. Coatings, Inks and Adhesives for Rigid Metal Packaging
|
|
- Lily Simmons
- 5 years ago
- Views:
Transcription
1 Product Catalogue Coatings, Inks and Adhesives for Rigid Metal Packaging
2 Index Page ACTEGA Rigid Packaging at a glance 3 Coatings, Inks and Adhesives for the following metal packaging end uses Cans - General Line, 2- & 3-piece Food, 3-p Aeosols 4-11 Ends - Easy Open Ends, Open Top Ends, Fully Aperture Open Ends, Peel Off-Ends Monobloc-Aerosols Aluminum-Bottles Tubes Drums Decorative Packaging Global Presence ACTEGA 30 Your Contacts within ACTEGA 31 Disclaimer 31 For can sealants, please refer to our separate catalogue by ACTEGA Artistica.
3 ACTEGA Rigid Packaging at a glance Product Lines Our complete product offering of specialty Coatings, Sealing Compounds, Inks and Adhesives makes ACTEGA a global and trusted partner in metal packaging and decoration? Coatings (solvent based, waterbased and UV curing)? Sealants (waterbased), Lining Equipment? Inks (oil-based and UV curing)? Adhesives (solvent based)? Customized solutions for steel and aluminum? Products for key applications e.g.food cans, can ends, beverage, containers, drums & pails and aerosol cans? Extensive regulatory knowledge. Continuous monitoring of regulatory updates To provide our customer with safe and reliable product solutions for highly regulated markets like food and beverage is our top priority. End Use? General Line Cans? Food/B&B-Cans? Ends (Can Ends, EOE, POE)? Aluminum Bottles? Tubes? Drums, Pails? Aerosols? Domes & Tops? Decorative & Specialty Effect Cans 3
4 Cans General Line, 2 & 3-piece Food, 3-p Aerosols (1/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat EB Basecoat X X X X X ACTEcoat GL-79-OVN Gold lacquer X X X X X X 41 5 ACTEcoat GL300-MF Gold lacquer X X X X X X 47 5 ACTEcoat GL360-MF Gold lacquer X X X X X X 48 5 ACTEcoat AL-96 Gold lacquer X X X X 40 7 ACTEcoat AL-300-MF Gold lacquer X X X X 48 7 ACTEcoat GL-115-KL Gold lacquer X X X X X X 35 5,5 ACTEcoat AL M Gold lacquer X X X 36 8 ACTEcoat GL Gold lacquer X X X X X 40 4,5 ACTEcoat WL Gold lacquer X X X 35 5 ACTEseal TN Heat Seal Lacquer X X X X X X 43 8,5 ACTEseal TN-111-F Heat Seal Lacquer X X X X 30 9 ACTEseal TN Heat Seal Lacquer X X X X X 31 9 ACTEseal TN-551-MF-02 Heat Seal Lacquer X X X X X ACTEcoat GLO-095 Organosol X X X 45 9 ACTEcoat S-348-NF Overprint varnish X X X X X 50 6 ACTEcoat S Overprint varnish X X X X X
5 BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (1/4) Company X X X* White X X X High coating speed, excellent wetting properties, different gold shades available X X X High flexibility, sterilisation resistant X X High flexibility, sterilisation resistant, excellent acid resistance X X Alu-pigmented, flexible, stain resistant, gold, colorshades available X X X Alu-pigmented, flexible, good product resistance, gold, colorshades available X X Extremely good flexibility, good resistance against acid X X Stain resistant, meat-release, alu-pigmented X Excellent resistance X X Good flexibility X X X Gold single coat X X Single coat X X Good product resistance, in combination with WZ (then TN to be used) X X X Good product resistance, can be used as single coat or in combination with GR-500-MF (alu) or GR-510-MF-02 (tinplate / TFS), white X X Fish cans and easy-open ends for fish cans X X X* BADGE-NI primer, base coat necessary, good flexibility, can be coated wet-in-wet X X X* Suitable for direct on metal, good flexibility 5
6 Cans General Line, 2 & 3-piece Food, 3-p Aerosols (2/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat S-160-H Overprint varnish X X X X 37 5 ACTEcoat S-143-VN110 Overprint varnish X X X X 37 4,5 ACTEcoat EF-series Overprint varnish X X X X 41 6 ACTEcoat GR-113 Primer X X X X X 31 3 ACTEcoat GR-500-MF Primer X X X X 47 8 ACTEcoat GR-510-MF-02 Primer X X X X X 47 8 ACTEcoat WZ Primer X X X X X 43 8 ACTEcoat WL Primer X X X ACTEcoat EB Primer X X X ACTEcoat GR-5023-series Primer X X X X ACTEcoat SL Protective X X X X X 38 5 ACTEcoat WZ Protective X X X X ACTEcoat WZ-500-MF Protective X X X X ACTEcoat SL-5000-M Protective X X X 40 5 ACTEcoat SL-5100-M Protective X X X X 42 5 ACTEcoat SL Protective X X X X X X 38 5 ACTEcoat WL Protective X X X
7 BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (2/4) Company X X* Single coat or in combination with stamping enamel EB-5108-series X* High scratch resistance, can be coated wet-in-wet X* Entire series available, as intermediate coat in a system with base and top coat X X UV & conventional colors printable, excellent flexibility X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X In combination with heatseal laquer TN used for round and fish cans, white. X X One layer coating possible, particularly resistant against water-based dispersions, can be used with SL , GL-115-KL and WL top coats X X Primer for WL105728, IP-100-OS or WL X X* Very good flexibility, large color selection available X Sterilisation resistant, colorless X X Universal coating, high surface hardness, excellent sterilisation resistance against acids, white, colorshades available X X X Flexible, good product resistance, white, colorshades available X X On standard gold, aluminium or white for meat-release X X X Flexible, meat-release X X Cans for printing inks X X* Organosol, recoating in combination with WL for the internal coating of technical packagings, waterbased products 7
8 Cans General Line, 2 & 3-piece Food, 3-p Aerosols (3/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat WL Protective X X X 58 9 ACTEcoat IP-100-OS Protective X X X ACTEcoat SL-693-Z Protective X X X X 38 5 ACTEcoat NA-424 Spray Coating X X X ACTEcoat NA-425 Spray Coating X X X 51 ACTEcoat EB-5108-series Stamping Enamel X X X X X ACTEcoat EB Stamping Enamel X X X X X KM350/2 Basecoat X X X X X RLC 23052/3 Basecoat clear X X X X X X KM16/4 Basecoat clear X X X X X ,5 RLC 16052/4 Gold varnish X X X X X X 41 5 RLC 26024/9 Overprint varnish X X X KM414 Overprint varnish X X X X X KM366/3 Overprint varnish X X X X X KM366/4L Overprint varnish X X X X X 47 5 Metalfix - Product Line 50 Ink X X X X X > 95 0,1-1 Polifix -Product Line 55 Ink X X X X X > 95 0,1-1 8
9 BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (3/4) Company X X* Top coat for EB , system shows excellent resistance against solventcontaining products X X Shows excellent resistance X Suitable for dry fabrication X X Inside and outside coating of welded seams, repair coating X* Mixing rate 2-compent seam protective coating NA-424 : hardener NA-425 : 2:1 X X X* Excellent flow, UV & conventional colors printable, white, colorshades available X X X* Good flexibility, UV & conventional colors printable, white colorshades available X X Excellent flexibility. BPA free - Melamine free, white X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X Can be used for body and easy open ends. BPA free - Melamine free X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X X Excellent abrasion resistance, recoatable by itself, repairable, suitable for expanding, FDA X Suitable for DRD Can, Tin plate, TFS or Aluminuim over White or Clear B/C. Very good flexibility X Suitable for DRD Can, Tin plate, TFS or Aluminuim over White or Clear B/C X Good properties for wet on wet application X X X For food packaging and GL X X X Excellent coverage. 9
10 Cans General Line, 2 & 3-piece Food, 3-p Aerosols (4/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry Sintetica - Product Line 57 Ink X X X X X > 95 0,1-1 UV Metal GL - Product Line 25 (nonfood) Ink > 95 0,1-1 UV Metal FP - Product Line 25 (food) Ink X X X X > 95 0,1-1 Polistar - Product Line 60 (B&B) Ink X X X X > 95 0,1-0,6 UV System - Product Line 20 OPV and Size X X X X Polyester/PU Enamels Basecoat X X X X X Polyester/PU Enamel Interior Basecoat X x X X X Acrylic Enamels Basecoat X X X X X Epoxy Varnishes Protective X X X X X X Epoxy Enamel Protective X X X X Acrylic Varnishes Topcoat X X X X X Acrylic Varnish Interior Topcoat X X X X X Polyester/PU Varnishes Top Coat X X X X X 10
11 BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Simultaneous cure with UV. Cans General Line, 2 & 3-piece Food, 3-p Aerosols (4/4) Company X X Excellent printability, wide varnish compatibility, good water-balance X X X Excellent printability, wide varnish compatibility, good water-balance X X Excellent machine compatibility, low misting and good thermal drying Good application results for aerosol 3 pc/ General Line Cans as well as efficient for Size Coat Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product Basecoat for Acrylic Varnish Top Coat - alternative for BPA System Basecoat for 2 and 3 piece cans, accepts inks and coating well Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE Good chemical resistance Top Coat for 2 and 3 piece-cans Top Coat Polyester Enamel Internal High Abrasion Resistance 11
12 Ends (EOE, OTE, FAEO, POE), Domes & Tops (1/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat GL-79-OVN Gold lacquer X X X ACTEcoat GL300-MF Gold lacquer X X X ACTEcoat GL360-MF Gold lacquer X X X ACTEcoat AL-96 Gold lacquer X ACTEcoat AL-300-MF Gold lacquer X X ACTEcoat GL-115-KL Gold lacquer X X X ACTEcoat AL M Gold lacquer X ACTEcoat GL Gold lacquer X X X ACTEcoat 71 KT 408/5 Gold lacquer X X ACTEcoat WL Gold lacquer X ACTEseal TN Heat Seal Lacquer X ACTEseal TN-551-MF-02 Heat Seal Lacquer X ACTEseal TN Heat Seal Lacquer X ACTEseal TN Heat Seal Lacquer X * with no opening-function 12
13 Ends (EOE, OTE, FAEO, POE), Domes & Tops (1/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X X X 41 5 X X X High coating speed, excellent wetting properties, different gold shades available X X X X 47 5 X X X High flexibility, sterilisation resistant X X X X 48 5 X - X High flexibility, sterilisation resistant, excellent acid resistance X X 40 7 X X Alu-pigmented, flexible, stain resistant, gold, colorshades available X X 48 7 X X X Alu-pigmented, flexible, good product resistance, gold, colorshades available X X X X 35 5,5 X X Extremely good flexibility, good resistance against acid X X 36 8 X Stain resistant, meat-release, alu-pigmented X X X 40 4,5 X Excellent resistance X 35 5 X Good resistance, also suitable for body of 3p Aerosol cans X X 35 5 X X Good flexibility X 31 9 X X Good product resistance, in combination with WZ (then TN to be used ) X X X X Good product resistance, can be used as single coat or in combination with GR-500-MF (alu) or GR-510-MF-02 (tinplate / TFS), white X 42 9 X X X Single coat for dry packs X 43 8,5 X X X Gold single coat 13
14 Ends (EOE, OTE, FAEO, POE), Domes & Tops (2/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat GLO-095 Organosol X ACTEcoat S-348-NF Overprint varnish X X ACTEcoat S Overprint varnish X X ACTEcoat S-160-H Overprint varnish X ACTEcoat S-143-VN110 Overprint varnish X X ACTEcoat S Overprint varnish X ACTEcoat GR-113 Primer X X ACTEcoat GR-500-MF Primer X X X ACTEcoat GR-510-MF-02 Primer X X X ACTEcoat WZ Primer X ACTEcoat WL Primer X ACTEcoat EB Primer X ACTEcoat SL Protective X X * with no opening-function 14
15 Ends (EOE, OTE, FAEO, POE), Domes & Tops (2/4) Solids Film Thickness BPA -NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X 45 9 X X Fish cans and easy-open ends for fish cans X X X 50 6 X X X* BADGE-NI primer, base coat necessary, good flexibility, can be coated wet-in-wet X X X 42 5 X X X* Suitable for direct on metal, good flexibility X X 37 5 X X* Single coat or in combination with stamping enamel EB-5108-series X X X 37 4,5 X* High scratch resistance, can be coated wet-in-wet X X 35 5,5 X X* Good scratch resistant X X X 31 3 X X UV & conventional colors printable, excellent flexibility X X 47 8 X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X 47 8 X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X 43 8 X X In combination with heatseal laquer TN used for round and fish cans, white X X X X One layer coating possible, particularly resistant against water-based dispersions, can be used with SL , GL- 115-KL and WL top coats. X X X X Primer for WL105728, IP-100-OS or WL X X X X 38 5 X Sterilisation resistant, colorless 15
16 Ends (EOE, OTE, FAEO, POE), Domes & Tops (3/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat WZ Protective X ACTEcoat WZ-500-MF Protective X ACTEcoat SL-5000-M Protective X ACTEcoat SL-5100-M Protective X X ACTEcoat SL Protective X X ACTEcoat WL Protective X ACTEcoat WL Protective X ACTEcoat IP-100-OS Protective X ACTEcoat SL Protective X X ACTEcoat NA-424 Spray Coating X ACTEcoat NA-425 Spray Coating X ACTEcoat EB-5108-series Stamping Enamel X X ACTEcoat EB Stamping Enamel X X * with no opening-function 16
17 Ends (EOE, OTE, FAEO, POE), Domes & Tops (3/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X X X Universal coating, high surface hardness, excellent sterilisation resistance against acids, white, colorshades available X X X X X Flexible, good product resistance, white, colorshades available X X 40 5 X X On standard gold, aluminium or white for meat-release X X 42 5 X X X Flexible, meat-release X X X 38 5 X X Cans for printing inks X X 50 7 X X* Organosol, recoating in combination with WL for the internal coating of technical packagings, water-based products X X 58 9 X X* Top coat for EB , system shows excellent resistance against solventcontaining products X X X X Shows excellent resistance X X X 34 4 X Gold lacquer, UV-resistant, also suitable for rotary screen coating X X X Inside and outside coating of welded seams, repair coating X 51 X* Mixing rate 2-component seam protective coating NA-424 : hardener NA-425 : 2:1 X X X X X X* Excellent flow, UV & conventional colors printable, white, colorshades available X X X X X X* Good flexibility, UV & conventional colors printable, white colorshades available 17
18 Ends (EOE, OTE, FAEO, POE), Domes & Tops (4/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) 01KM16/4 Basecoat clear X RLC 23052/3 Basecoat clear X X X RLC 16052/4 Gold varnish X X X 71 KM 292 HES Overprint varnish X Metalfix - Product Line 50 Ink X X X X Polifix -Product Line 55 Ink X X X X Sintetica - Product Line 57 Ink X X X X UV Metal GL - Product Line 25 (non-food) UV Metal FP - Product Line 25 (food) Ink X X Ink X X Polistar - Product Line 60 (B&B) Ink X Polyester/PU Enamel Interior Basecoat X Acrylic Varnish Interior Topcoat X Epoxy Varnishes Varnish X X X Polyester/PU Varnishes Varnish X * with no opening-function 18
19 Ends (EOE, OTE, FAEO, POE), Domes & Tops (4/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X ,5 X X Can be used for body and easy open ends. BPA free - Melamine free X X X X 38 4 X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X X X 41 5 X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X 45 5 On stamping enamel, can be coated wet-in-wet, H2O2-resistant X X X > 95 0,1-1 X X X For food packaging and GL X X X > 95 0,1-1 X X X Excellent coverage X X X > 95 0,1-1 X Simultaneous cure with UV X X > 95 0,1-1 X X Excellent printability, wide varnish compatibility, good water-balance. X > 95 0,1-1 X X X Excellent printability, wide varnish compatibility, good water-balance. > 95 0,1-0,6 X X Excellent machine compatibility, low misting and good thermal drying. X Basecoat for Acrylic Varnish Top Coat - alternative for BPA System X Top Coat Polyester Enamel Internal X X X X Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE X High Abrasion Resistance 19
20 Monobloc-Aerosols Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) exterior interior % µm X* = indirect contact RLCG30035/2 Basecoat X 40 5 RLC 15070/2 Basecoat X KL150/4 BT HV (Clear) Basecoat X KM 309/4 BV Basecoat X 48 5 White Coating 71 KL 150/4 BT NF BV Basecoat X White Coating T KM360/4 BV Basecoat X KM295G Overprint varnish X 55 5 RLC Overprint varnish X 37 5,5 X RLC 10106/4 Overprint varnish X 42 8 X 75KW373/2 Overprint varnish X 42 8 RLC 08065/3 Overprint varnish X 43 5,5 X RLC 10031/4 Protective X X X RLC Protective X X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X UV Metal GL - Product Line 25 (non-food) Ink X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X > 95 0,1-1 X X X Polyester/PU Enamels Basecoat X Epoxy Varnishes Varnish X Polyester/PU Varnishes Varnish X 20
21 Monobloc-Aerosols Product Description Company Gold versions available, suitable up to 66 mm Excellent flow, Waterbased White Basecoat compatible with Polyester inks Approved by Coca-Cola for Alu Bottles and by Avene for Aerosols, colorshades available Pass hot water bath test - Naphtalene depleted and Isophorone free Approved by Coca-cola for Alu bottle - Approved by Avene Pass Hot water bath test Approved by Coca-Cola for Alu Bottles Overprint Varnish for Pasteurisation (Beer Bottles) Water based technology. Good abrasion resistance. Water based technology. Good abrasion resistance. Water based technology. Good abrasion resistance. Meets FDA regulation with alcooholic restriction. Replace PAM. High chemical resistance. Abrasion resistance, excellent thermal drying. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE High Abrasion Resistance 21
22 Aluminum-Bottles Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) exterior interior % µm X* = indirect contact 71KL150/4 BT HV (Clear) Basecoat X 50 5 RLC Basecoat X 51 5 X White Coating 71 KL 150/4 BT NF BV Basecoat X KM295G Overprint varnish X 55 5 RLC Overprint varnish X 37 5,5 X RLC 18025/6 Spray Coating X X X X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Polyester/PU Enamels Basecoat X Polyester/PU Varnishes Top Coat X 22
23 Aluminum-Bottles Product Description Company Approved by Coca-Cola for Alu Bottles and by Avene for Aerosols, colorshades available Clear size in combination with RLC for Pasteurisation (Beer bottles) Approved by Coca-cola for Alu bottle - Approved by Avene Approved by Coca-Cola for Alu Bottles Overprint Varnish for Pasteurisation (Beer Bottles) Colorless, good chemical resistance, without Alcoolic restriction Abrasion resistance, excellent thermal drying. Excellent machine compatibility, low misting and good thermal drying. Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product High Abrasion Resistance 23
24 Tubes Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) food nonfood exterior interior % µ X* = indirect contact ACTEseal HS-251-GR Sealant varnish X X X X X X ACTEcoat TGL-57 Spray Coating X X X X ACTEcoat Spray Coating X X 37 9 X X 72KM322 Basecoat X RLC 10031/4 Protective X X X X X Alumifix -Product Line 52 Ink X X X > 95 0,1-1 X X X UV Plast - Product Line 22 Ink X X X X X Polyester/PU Enamels Basecoat X X X Epoxy Varnishes Varnish X X X Polyester/PU Varnishes Varnish X X X
25 Tubes Product Description Company Heat-sealable tube compound for non-coated and internally coated aluminum tubes Very good acid and alkali resistance LOR-30, viscosity variations available Non varnish base coat, pigmented Meets FDA regulation with alcooholic restriction. Abrasion resistance, excellent thermal drying. Excellent adhesion, good water-balance Excellent flow, excellent "crush" test, white, colors available Very good acid and alkali resistance High Abrasion Resistance 25
26 Drums Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) food nonfood exterior interior % µ X* = indirect contact RLC110602/4 Basecoat X X X KM351 Basecoat X X X depending on the shade 30KM372 Basecoat X X X depending on the shade 72KM377 Basecoat X X depending on the shade RLC 08123/7 Overprint varnish X X X RLC17104 Protective X X X 60 X X RU RLC /3 Stamping Enamel X X X Metalfix - Product Line 50 Ink X X X > 95 0,1-1 X X X Polifix -Product Line 55 Ink X X X > 95 0,1-1 X X X Sintetica - Product Line 57 Ink X X X > 95 0,1-1 UV Metal GL - Product Line 25 (non-food) Ink X X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Epoxy Varnishes Protective X X X 26
27 Drums Product Description Company Very high abrasion resistance, pigmented Application Airless or Airmix Sprayed gun. High bake paint-suitable for simultaneous curing with inside lacquer. Very high abrasion resistance. Very high flexibility, pigmented Application Airless or Airmix Sprayed gun. High bake paint - suitable for simultaneous curing with inside lacquer. Good adhesion on black steel or tin plate. Good hiding power. UV & conventional Inks compatible, pigmented Good gloss, high scratch resistance Food contact. BADGE/BFDGE/NODGE, pigmented Very high abrasion resistance, very good covering power, colorshades available For food packaging and GL Abrasion resistance, excellent thermal drying. Simultaneous cure with UV. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Excellent machine compatibility, low misting and good thermal drying Good chemical resistance 27
28 Decorative Packaging Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) interior exterior % g/m2/dry X* = indirect contact ACTEcoat S-160-H Overprint varnish X 37 5 X X* ACTEcoat EF-series Overprint varnish X 41 6 X* ACTEcoat SL-693-Z Protective X 38 5 X ACTEcoat SL Protective X X 38 5 X X* ACTEcoat EB-5035-series Stamping Enamel X X X X* Metalfix - Product Line 50 Ink X > 95 0,1-1 X X X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X Polifix -Product Line 55 Ink X > 95 0,1-1 X X X Sintetica - Product Line 57 Ink X > 95 0,1-1 UV Metal GL - Product Line 25 (non-food) Ink X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Polyester/PU Enamels Basecoat X Acrylic Enamels Basecoat X UV System - Product Line 20 OPV and Size X Epoxy Varnishes Protective X X Epoxy Enamel Protective X Acrylic Varnishes Top Coat X Polyester/PU Varnishes Top Coat X
29 Decorative Packaging Product Description Company Single coat or in combination with stamping enamel EB-5108-series Entire series available, as intermediate coat in a system with base and top coat Suitable for dry fabrication Cans for printing inks Very good flexibility, large color selection available For food packaging and GL Thermally cured Excellent coverage. Simultaneous cure with UV. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Excellent machine compatibility, low misting and good thermal drying. High Flexibility, compatible with UV and Conventional Inks Compatible with UV and Conventional Inks UV curable Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE Good chemical resistance High abrasion resistance High Abrasion Resistance 29
30 Global Presence ACTEGA Coatings & Sealants - Rigid Metal Packaging Centers of Competence ACTEGA North America Inc., USA S.A.S., France ACTEGA Artística S.A., Spain ACTEGA GmbH (HQ), Germany GmbH, Germany ACTEGA Foshan Co. Ltd. China (P.R.) ACTEGA Overlake, Brazil ACTEGA Premiata, Brazil 30
31 Your Contacts for Rigid Packaging GmbH Rhenaniastr Grevenbroich Germany Phone: Contact Person: Peter Zwankhuizen ACTEGA Artística Pol. Ind. A Granxa, rúa F Porriño (Pontevedra) Spain Phone: Jose.Trigo@altana.com Contact Person: José Trigo S.A. 1, avenue Francois Sommer, Z.l. de Glaire, B.P Sedan Cedex France Phone: Thierry.Tabeaud@altana.com Contact Person: Thierry Tabeaud ACTEGA Foshan Co., Ltd., China (P.R.) No. 22, Xing Ye Road, Bejiao Industrial Estate Shunde Region, Foshan City, Guangdong Pro. PRC China Phone: Kevin.Wu@altana.com Contact Person: Kevin Wu ACTEGA North America 950 S. Chester Avenue Delran, NJ USA Phone: William.Allen@altana.com Contact Person: Bill Allen e Vernizes Gráficos Ltda. Alameda Caiapós 383 Tamboré Barueri Sao Paulo Brasil Phone: claudio.rodrigues@altana.com Contact Person: Claudio A. Rodrigues Disclaimer Copyright 2016 ACTEGA. All Rights Reserved. The texts, images, graphics, trademarks, brands and emblems are all subject to copyright and other intellectual property protection. Any use beyond law, in particular but not limited to duplication, translation and modification is illegal. The information and specification published on these sites are given to the best of ACTEGA knowledge. All this information shall not, however create any guarantee or representation with regard to characteristics and fitness for any particular purpose and shall not relieve the user from undertaking its own investigations and tests. Products, services, delivery terms and prices are subject to alteration without prior notice. Version 2.1, date 04/04/
32 Version 2.1, date 04/04/2016
ACTEGA Coatings & Sealants
ACTEGA Coatings & Sealants ALTANA Profile ALTANA at a Glance ALTANA Companies Management Team Profile ALTANA The ALTANA headquartered in Wesel, Lower Rhine, Germany: is a global specialty chemical group
More informationACTEGA Coatings & Sealants
Coatings & Sealants ALTANA Profile Executive Management Team ALTANA at a Glance ALTANA Companies Profile ALTANA The ALTANA headquartered in Wesel, Lower Rhine, Germany: is a global specialty chemical group
More informationYour markets, our solutions
Your markets, our solutions ACTEGA GmbH Abelstraße 43 46483 Wesel Germany www.actega.com Issue: July 2015 The specialist for packaging and printing Content 04 Profile 06 Locations 08 Closures 10 Flexible
More informationConverting Specialties. Variety is our strength
Converting Specialties Variety is our strength 01 Philosophy Versatility and reliability Contents Demand for individualised products will continue to grow in the future. And we are ready for this increase.
More informationCoatings and Compounds for Small Diameter Metal Closures
Coatings and Compounds for Small Diameter Metal Closures Introduction Henkel supplies a complete range of PVC and non-pvc sealants to meet the sealing requirements of the closure industry. The main purpose
More informationLV360 Primer EP 2.1 FOR PROFESSIONAL USE ONLY
Description Autocoat BT LV360 EP 2.1 is a two-component high solids corrosion inhibitive epoxy primer. LV360 Epoxy 2.1 is a low VOC, high solids, HAPs-Free epoxy primer that can be applied as a wet on
More information4 divisions with independent brands. 1 firmly anchored corporate culture. ALTANA Global Leader in True Specialty Chemicals. Total sales > 2.
Facts & Figures Total sales > 2.2 billion Including 6% annual investment in R&D Around 30 acquisitions in the last 10 years Approximately 6,200 employees worldwide 4 divisions with independent brands ALTANA
More informationDrying Conditions Formulation Application Process BPA-NI PVC-NI MF-NI FDA EU Swiss Ordinance. Gravure Flexo
3 Substrate Productfunction Application Area Technical Information Food Contact Regulation*** Product Description Productname Company Paper Alu Plastic Solids Measuring Method* Film Weight** Drying Conditions
More informationRecent progress in application of polymer-coated steels for decorated 2-piece aerosol & beverage cans
Recent progress in application of polymer-coated steels for decorated 2-piece aerosol & beverage cans W. van der Meer Corus Packaging Plus IMDA Conference, May 2006 Presentation Outline Polymer-coated
More informationApplication Guidelines for Field-Applied Touch-up Paint Systems on Metal Panels
WHITE PAPER Application Guidelines for Field-Applied Touch-up Paint Systems on Metal Panels Introduction The information provided is intended to serve as a guide for the application of field applied air-dry
More informationProduct Data Sheet July 2017
Premium Surfacer P565-5701, P565-5705 & P565-5707 H5620V Product Data Sheet July 2017 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Product Speed Surfacer P565-5801, P565-5805 & P565-5807 Description
More informationDirect to Metal 2K Urethane High Build Primer
A direct to metal, high build, premium quality, two component, acrylic urethane primer. Primer offers excellent corrosion protec on, adhesion and great sand scratch holdout. Higher solids formula provides
More informationPolyurethane Topcoats. Base material
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information is a 3-component basecoat for use in the base coat clear coat decoration system
More informationTECHNICAL DATA SHEET Date: , Version: 3
TECHNICAL DATA SHEET Date: 14.11.2016, Version: 3 Range name : SICURA Litho Metaldec Description : The SICURA Litho Metaldec range is composed of a selection of metal dec suitable inks of the SICURA Litho
More informationPHENOLIC CROSSLINKERS
PHENOLIC CROSSLINKERS Product Guide - Phenodur Resins - Worldwide www.allnex.com About allnex Table of Contents Introduction...4 Phenolic Resin Grades...4 Phenolic Resins for Can Coatings...6 Phenolic
More informationAMERSHIELD VOC. PRODUCT DATA SHEET April 20, 2015 DESCRIPTION. Low VOC Polyester Acrylic Polyurethane PRINCIPAL CHARACTERISTICS
DESCRIPTION Low VOC Polyester Acrylic Polyurethane PRINCIPAL CHARACTERISTICS Unique, high-solids, high build coating Outstanding weather resistance with excellent color and gloss retention Tough, flexible
More informationNOVEL, ADAPTIVE AND CUSTOMIZABLE CHEMISTRY APTALON POLYAMIDE POLYURETHANE TECHNOLOGY.
NOVEL, ADAPTIVE AND CUSTOMIZABLE CHEMISTRY APTALON POLYAMIDE POLYURETHANE TECHNOLOGY www.lubrizol.com/aptalon TM Aptalon polyamide polyurethane technology is a revolutionary chemistry from Lubrizol that
More informationTechnical Datasheet Issue: March 2018
Technical Datasheet Issue: March 2018 Product Name SICURA Flex 39-8 1. Description / Application Flexo printing inks, curing by radical mechanism with UV-light, for paper, in-line Corona treated polyethylene,
More informationAerodur HS Primer 37092
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy Primers Characteristics Product Information is a 2 component amine cured epoxy primer with improved adhesion properties for interior
More informationTECHNICAL DATA SHEET Date: , Version: 4
TECHNICAL DATA SHEET Date: 31.03.2017, Version: 4 Range name : SICURA Metaldec Description : The SICURA Metaldec range is composed of a selection of metal dec suitable inks of the SICURA Plast SP for industrial
More informationYour imagination, our manufacturing excellence.
Your imagination, our manufacturing excellence. Product Line Descriptions Pan Technology offers a line of solid chip pigmented dispersions unlike any other colorant house. Pound for pound, chip dispersions
More informationAutocoat BT LV 250 Topcoat IC RM. Autocoat BT LV 250 Topcoat IC RM Autocoat BT LV 250 Hardener Medium
4 2509-001 1 2509-104 1 2509-203 2509-204 Description: High gloss, 2K High Solids polyurethane topcoat. The target use for this product is refinishing and refurbish of existing vehicles and the painting
More informationHS+ Primer Filler P , P & P
Product Data Sheet November 2006 FOR PROFESSIONAL USE ONLY HS+ Primer Filler P565-5301, P565-5305 & P565-5307 Product Description P565-5301 HS+ Primer Filler White Spectral Grey 01 P565-5305 HS+ Primer
More informationProduct Brochure Paint Additives
Product Brochure Paint Additives Regional Headquarters Europe UNIQCHEM (GmbH) Postbox 170353 D47198 Duisburg, Germany Tel: +49 5921 853 7428 Email: eu@uniqchem.com North America UNIQCHEM (USA) 686 S.Allen
More information1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer. PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
More informationTechnical data sheet Spectral UNDER 385 Two-component epoxy primer RELATED PRODUCTS
UNDER 385 Two-component epoxy primer UNDER 385 H 6985 PLAST 825 EXTRA 745 RELATED PRODUCTS Epoxy primer Hardener Plastic adhesion increasing agent Filler Dye PROPERTIES Fast-drying epoxy primer Very good
More informationROCK-IT XC TECHNICAL DATA SHEET
ROCK-IT XC TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rock-It XC is a high quality, urethane, textured coating that provides a durable, chemical and fade resistant, protective finish for truck beds,
More informationPRODUCT DATA SHEET. Sika Unitherm Steel S exterior. (formerly Sika Unitherm exterior) PRODUCT DESCRIPTION
PRODUCT DATA SHEET (formerly Sika Unitherm 38091 exterior) Solvent based fire protection coating for steel, fast dry, interior/exterior use PRODUCT DESCRIPTION is an ecological thin film fire protection
More informationBasecoat WB Technical Data Sheet 09 / 05 / 2016 L UK & Ireland Basecoats
Description One component, mixing machine water based basecoat system. Available in a wide variety of colours including metallic, pearls and solids. Specifically designed for the refinishing of passenger
More informationPolybase Plus Basecoat (Low VOC)
Description Polybase Plus is a catalyzed basecoat made from polyester and acrylic resins for use in Automotive and Truck refinishing. Polybase Plus can be used on repairs without swelling, lifting or wrinkling.
More informationPERFORMANCE COATINGS. Paints, Coatings, Textiles and Specialty. polyurethane dispersions Product Guide.
PERFORMANCE COATINGS Paints, Coatings, Textiles and Specialty Applications polyurethane dispersions Product Guide www.lubrizol.com/coatings 100% Modulus Mechanical Properties 6000 Sancure 898 5000 Sancure
More informationNORIPHAN XMR Halogen Free Ink System for IMD/FIM-Technology (back molding of screen printed films)
Technical Information 7/2018 Halogen Free Ink System for IMD/FIM-Technology (back molding of screen printed films) Area of Application is a solvent-based two-component screen printing ink for IMD/FIM technology
More informationROCK-IT XC TECHNICAL DATA SHEET
ROCK-IT XC TECHNICAL DATA SHEET DESCRIPTION Rock-It XC is a high quality, urethane, textured coating that provides a durable, chemical and fade resistant, protective finish for truck beds, recreational
More informationMAKING IMPROVEMENTS IN ENERGY CURABLE PLASTIC SUBSTRATE ADHESION PERFORMANCE
MAKING IMPROVEMENTS IN ENERGY CURABLE PLASTIC SUBSTRATE ADHESION PERFORMANCE Paulo Roberto Vieira Junior, Marc Heylen, Paul Gevaert, Francis Bergiers, Luc DeWaele, Rosalyn Waldo, and Peter Yuan. Allnex
More information3,Rothwell Street, Timaru, South Canterbury. ; : Phone or
ECO-SEAL 100 3,Rothwell Street, Timaru, South Canterbury Email; ideaslab64@gmail.com : Phone +64 3 688 5508 or 0275 239888 Two Pack Flexible Self Priming high hysteresis waterproofing membrane designed
More informationTechnical data sheet Spectral UNDER 335 Two-component acrylic filler RELATED PRODUCTS. acrylic thinners
Two-component acrylic filler PLAST 775 PLAST 825 EXTRA 755 EXTRA 745 RELATED PRODUCTS P1 white acrylic filler P3 grey acrylic filler P5 black acrylic filler Hardener Standard, fast, slow and extra slow
More informationPolybase Plus Basecoat
Description Polybase Plus is a catalyzed basecoat made from polyester and acrylic resins for use in Automotive and Truck refinishing. Polybase Plus can be used on repairs without swelling, lifting or wrinkling.
More informationSECTION INTUMESCENT FIREPROOFING
SECTION 078123 INTUMESCENT FIREPROOFING PART 1 GENERAL 1.1 GENERAL REQUIREMENTS A. Work of this Section, as shown or specified, shall be in accordance with the requirements of the Contract Documents. 1.2
More informationCoating Cost Control Why Weight? Industry Update from Sensory Analytics
Coating Cost Control Why Weight? Industry Update from Sensory Analytics 1 SENSORY ANALYTICS Dedicated coating thickness & film weight control focus The source for SpecMetrix technology Unique optical technique
More informationPOWDER COATING CATALOG
POWDER COATING CATALOG Product Overview Product Name EPI PC-Cure 2C-P Chemical Description & Usage Choline Chloride Powder Latent catalyst, coats aluminum, improves mechanical resistance & is nonyellowing.
More informationTECHNICAL DATA SHEET & PROCESS GUIDE
U-POL s RAPTOR Truck Bed Liner is a durable 2K urethane coating that provides surfaces with a protective barrier. One Kit of RAPTOR includes: 4 x 750ml RAPTOR base coating 1 x 1L RAPTOR hardener Features
More informationComplete Car Refinishing
www.lubeca.nu a brand of MOTIP DUPLI Complete Car Refinishing Putties Lacquers Under Body Coatings Technical Sprays w w w. c o l o r m a t i c. c o m Contents Degreasing and Cleaning Silicone Remover...6
More informationPRODUCT RANGE POLYESTER RESINS
DYNAPOL PRODUCT RANGE POLYESTER RESINS DYNAPOL HIGH-MOLECULAR WEIGHT COPOLYESTERS. MEDIUM-MOLECULAR WEIGHT COPOLYESTERS. SATURATED POLYESTER RESINS FOR STOVING ENAMELS By developing saturated polyesters,
More informationTECHNICAL DATA SHEET 1051R / 1057R HIGH PRODUCTIVE SURFACER DESCRIPTION
DESCRIPTION 2-component high solids surfacer with 2 methods of application: a. maxi filler; b. sanding surfacer. Colour: white, black. Composition based on special hydroxy functional acrylic. PRODUCTS
More informationAutowave FOR PROFESSIONAL USE ONLY. Description. Basecoat 08/17/2017
Description Autowave waterborne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autowave must be used in conjunction
More informationAerodur CF Primer 37047
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Primers Characteristics Product Information is a 3-component chromate free isocyanate cured modified polyurethane primer for
More informationTechnical data sheet PROTECT 360 Anti-corrosion epoxy primer Fast drying epoxy anti-corrosion primer hardened with amine adduct RELATED PRODUCTS H5950
Anti-corrosion epoxy primer Fast drying epoxy anti-corrosion primer hardened with amine adduct RELATED PRODUCTS H5950 H5960 THIN 60 Epoxy primer hardener Epoxy primer hardener Epoxy thinner USE: Means
More informationOne-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
More informationWATERBORNE POLYURETHANES ENVIRONMENTALLY & USER FRIENDLY. Bond Polymers International ISO 9001:2008 Certified. P.O. Box 2458 Seabrook, NH U.S.A.
BONDTHANE WATERBORNE POLYURETHANES ENVIRONMENTALLY & USER FRIENDLY ADVANTAGES: LOW ODOR LOW V.O.C. MAR RESISTANT ALKALI RESISTANT ABRASION RESISTANT NON- TM FLAMMABLE FLEXIBILITY HIGH PERFORMANCE POLYMERS
More informationGeneral: Primarily designed for maintenance and repair. Only aluminium containing versions to be used in immersed environments.
Other Technical Data Sheet 5580;5660;6520;10760 1,2 5580 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high
More informationTSC34 MIGRATION TESTING GUIDELINES FOR RIGID METAL PACKAGING COATED WITH ORGANIC
TSC34 MIGRATION TESTING GUIDELINES FOR RIGID METAL PACKAGING COATED WITH ORGANIC COATINGS INTENDED FOR DIRECT FOOD CONTACT VERSION 6.3 10 TH OCTOBER, 2017 Page 1 of 12 CONTENTS 1. SUMMARY... 3 Migration
More informationAgitate / gently shake the Autowave can prior to use. o Stir color thoroughly prior to adding Activator WB
Description Autowave waterborne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autowave must be used in conjunction
More informationTechnical data sheet Spectral UNDER 325 Two-component acrylic filler RELATED PRODUCTS. acrylic thinners
UNDER 325 Two-component acrylic filler UNDER 325 UNDER 325 UNDER 325 PLAST 775 PLAST 825 EXTRA 755 EXTRA 745 RELATED PRODUCTS P1 white acrylic filler P3 grey acrylic filler P5 black acrylic filler Hardener
More informationCoatings for. Paper-based Packaging
for Paper-based Packaging 2 3 for Paper-based Packaging ACTEGA offers innovative specialties for the paper-based packaging industry. Our product portfolio is consistently tailored to customer requirements.
More informationSeries 751 2C Pad Printing Ink for Glass, Metals and Duroplasts
Series 751 2C Pad Printing Ink for Glass, Metals and Duroplasts Glossy and highly resistant pad printing ink Series 751 for printing on glass, various metals and duroplasts. Series 751 does neither contain
More informationEOC BELGIUM EMULSION DIVISION. Product Review
EOC BELGIUM EMULSION DIVISION Product Review CONSTRUCTION CONSTRUCTION CEMENT MODIFICATION Product Solids (%) Viscosity (mpas) ph MFFT/Tg ( C) Backbone Features & Uses L 6050 50
More informationProperty Test/Standard Description
Approved 720 1,2 720 silicone acrylic ^(ValidationDate) 1 Product description This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 C. Can be used as primer,
More informationCoil coatings Improving efficiency, enhancing aesthetics
Coil coatings Improving efficiency, enhancing aesthetics Eastman cellulose esters ADD-COAT-7952 Table of Contents Segment Overview Slide 4 Segment Challenges Addressed by CAB Slide 7 Results Slide 9 Conclusion
More informationApplication. Fuselage Fuselage Fuselage. Decoration Decoration
Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to
More informationAgitate / gently shake the Basecoat WB can prior to use. o Stir color thoroughly prior to adding Activator WB
Description Basecoat WB waterborne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Basecoat WB must be used in
More informationTechnical Data Sheet S Topcoats LV 351 TOPCOAT MM/RM FOR PROFESSIONAL USE ONLY
100 Topcoat 40 Hardener 30 Reducer Description: High gloss, state of the art 2K High Solids polyurethane topcoat. The target use for this product is refinishing and refurbish of existing vehicles and the
More information1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)
DESCRIPTION One component heat resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat resistant
More informationHeresite P-413 TECHNICAL DATA SHEET. P-413 Typical Properties 1 mil DFT) Our 50 years of coating history speaks for itself.
Heresite P-413 Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became
More informationProtact Optimized, efficient and sustainable laminated steel for packaging
Protact Optimized, efficient and sustainable laminated steel for packaging INTRODUCING PROTACT Protact laminated steel from Tata Steel is a fully approved and controlled food-safe product. It is a proven
More informationProperty Test/Standard Description. calculated US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
Approved 23680;1551 1,2 23680 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids product. It is aluminum
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 25 C calculated IED (2010/75/EU) (theoretical)
Approved 618;612 1,2 618 epoxy ^(ValidationDate) 1 Product description This is a two component, polyamide cured, high molecular weight epoxy coating. It is a zinc phosphate pigmented, high build product.
More informationGraphic Arts Polymers. Providing Creative Solutions
Graphic Arts Polymers Providing Creative Solutions Serving the Graphic Arts Industry... Hydrite Chemical Co. is a full-service, customer-oriented supplier of styrene/ acrylic emulsion polymers and solutions
More informationAK40 PRIMER ACRILICO HS Two-component acrylic monolayer primer
Twocomponent acrylic monolayer primer Revision 2 fro 1/01/201 Converter name AK40 Destination Primer with excellent adherence on steel, galvanised steel, aluminium, light alloys. Suitable as first coat
More informationtwo component polyamide cured epoxy primer yellow/green - eggshell
6 pages Revision of December 006 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 0 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationAchieving premium product appeal. Metasheen Superior mirror and liquid metal effects
Achieving premium product appeal Metasheen Superior mirror and liquid metal effects Agenda Metasheen at a glance Performance highlights Our global portfolio Guide formulations 2 Metasheen at a glance Metasheen
More informationProperty Test/Standard Description
Approved 1537 1,2 1537 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. It is a fast drying, high build, zinc phosphate pigmented product. Can be
More informationProperty Test/Standard Description
Other Technical Data Sheet 24100;24120;26200 1 24100 VValidationDate). 1 Product description This is a two component, anticorrosive water borne epoxy coating. It is a versatile, fast drying product containing
More informationGently shake the Autowave can prior to use. Prior to clearcoat application: Until completely matt at 25 C 15 minutes at 25 C
Description Autowave waterborne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl effect colors. Autowave must be used in conjunction
More informationImron HydroClearCoat. 2K Waterbased Clearcoat PUR. Technical Data Sheet. Description
Description Imron HydroClearCoat HC300 is a waterbased 2-component polyurethane clearcoat especially developed for application on all types of commercial vehicles. Composition based on acrylic resin. Products
More informationLiquid-Applied Roof Solutions ACRYLIC & SILICONE COATINGS PRIMERS & ACCESSORIES
Liquid-Applied Roof Solutions ACRYLIC & SILICONE COATINGS PRIMERS & ACCESSORIES Water Based Acrylic Coatings 70 Premium Grade Elastomeric Roof Coating ASTM D6083 Type I compliant 4.75 Gallon / 50 Gallon
More informationApplication. Fuselage Fuselage Fuselage. Decoration Decoration
Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to
More informationCoatings for Electronics
Coatings for Electronics Product Selection Guide Visit oem.sherwin-williams.com/electronics Reliability. Consistency. Performance. Trust Sherwin-Williams to protect and beautify your electronics products.
More information10P20-14 High Solids Low IR Primer
Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.
More informationtwo component polyamide cured epoxy primer yellow/green (redbrown on request) - eggshell
5 pages Revision of July 2005 DESCRIPTION two component polyamide cured epoxy primer PRINCIPAL CHARACTERISTICS general purpose epoxy primer in protective coating systems for steel and non ferrous metals
More informationThe Best of Both Worlds!
The Best of Both Worlds! The Best of Both Worlds! A benchmark high-performance polyurethane paint that limits VOC to less than 50g/L or.4172 lbs/gal while delivering superior color and durability. High
More informationPPG HI-TEMP 1000 VS. PRODUCT DATA SHEET December 10, 2014 (Revision of June 30, 2014) DESCRIPTION
DESCRIPTION One-component, heat-resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat-resistant
More informationCoil Coating Topcoat Systems Clark Higginbotham, The Valspar Corporation December, 2004
#8 Coil Coating Topcoat Systems Clark Higginbotham, The Valspar Corporation December, 2004 The objective of this paper is to provide a practical chemistry background for the differentials observed in our
More informationtwo component polyamide cured epoxy primer yellow/green (redbrown on request) - eggshell
5 pages Revision of September 2009 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationUV/EB CURABLE RESINS CONSUMER ELECTRONICS & INDUSTRIAL PLASTICS
UV/EB CURABLE RESINS CONSUMER ELECTRONICS & INDUSTRIAL PLASTICS www.allnex.com About allnex Table of Contents Introduction...4 Product families...6 Product Overview...8 Aliphatic Urethane Acrylates...14
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 32 C
Approved 18420;18360 1,2 18420 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured, glass flake reinforced, abrasion resistant epoxy coating. It is a surface tolerant, high
More informationDriven by tomorrow. BASF pigments, resins and additives for the automotive and transportation coatings industry
Driven by tomorrow BASF pigments, resins and additives for the automotive and transportation coatings industry 2 Driven by tomorrow Global solutions, world markets, local presence Serving the needs of
More informationUse suitable respiratory protection Akzo Nobel Car Refinishes recommends the use of a fresh air supply respirator
Description Autobase Plus basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl colour effects. Autobase Plus must be used in conjunction
More informationEX-408 PRIMERS for Australian Defence Force using
TECHNICAL DATA SHEET EX-408 PRIMERS for Australian Defence Force using 414-9806 PRODUCT DESCRIPTION Commercial Performance Coatings EX-408 Primer is a zinc phosphate containing, polyamide cured epoxy primer,
More informationOne-coat application 5 LV650 Clear 2 LV650 Hardener 1 LV650 Reducer Anti-Graffiti (#484165)
Description Autocoat BT is a two component VOC compliant clear coat that provides excellent chemical resistance and stain repellent properties. is designed for original equipment and repairs of commercial
More informationProperty Test/Standard Description
Approved 1505;1506 1,2 1505 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is heat resistant up to 205 C (401
More informationU280 Single Stage. Check gun manufacture specification HVLP Pressure
Description is two-component, acrylic urethane designed for original equipment and repairs for commercial vehicles. is a cost-effective durable finish with good color capability that is simple to mix and
More informationPrimers and Top Seals
Smart Protection Primers and Top Seals High Performance Anti-Corrosion Primers and Decorative Top Seals for Structural Steelwork At the Forefront of Smart Passive Fire Protection We are specialists, with
More informationMaterial Solutions for Printed Electronics
Material Solutions for Printed Electronics The brand ALTANA represents a global specialty chemical group. It comprises the holding company ALTANA AG and four operating divisions: ELANTAS Electrical Insulation,
More information4228 Technical Data Sheet Red Insulating Varnish
Description Our 4228 is a highly insulating coating with excellent arc and corona resistance. This low viscosity, one-part varnish coating is easy to use and adheres well to many substrates. Applications
More informationdue to inadequate curing. Whilst poor curing will cause adhesion failures, it must be noted that List of Contents
Auxiliaries for UV-curable Screen Printing Inks Appropriate use of s Auxiliaries for UV-curable Screen Printing Inks Screen 2017 22. May Status of the reflector to determine whether the mirrors are clean
More informationProperty Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (28 C) VOC-USA / VOC Hong Kong EPA Method 24
1505;1506 1 1505 novolac epoxy VValidationDate). 1 Product description This is a two component polyamine cured novolac epoxy coating. It is heat resistant up to 392 F (200 C) and can be applied on hot
More informationHS High-Build, Primer Surfacer P /1028. HS High-Build, Primer Surfacer P / Grey / White
Product Data Sheet February 2018 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Product P565-1027/8 Product Description HS High-Build, Primer Surfacer P565-1027 /1028 - Grey / White Description HS High
More informationMarine: Exterior and interior areas, including outside hulls, superstructures, decks, cargo holds and water ballast tanks.
478;479;4060 1,2 478 epoxy VValidationDate). 1 Product description This is a two component amine cured pure epoxy coating. It is a fast drying, abrasion resistant, high solids, high build product. Designed
More information