Construction. Universal anchoring adhesive. Product Description 1 1/7. Product Data Sheet Edition _1 Sika AnchorFix -S
|
|
- Milton Oliver
- 5 years ago
- Views:
Transcription
1 Product Data Sheet Edition _1 Sika AnchorFix -S Sika AnchorFix -S Universal anchoring adhesive Construction Product Description Uses Characteristics / Advantages Styrenated polyester based two part anchoring adhesive. As a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel Threaded rods Bolts and special fastening systems Concrete Hollow and solid masonry Prior to any application, the suitability of the Sika AnchorFix Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: Hard natural stone Solid rock Fast curing Non-sag, even overhead Low wastage 1 1/7
2 Product Data Form Colours Part A: white Part B: black Part A+B mixed: light grey Packaging Storage 380 ml standard cartridge, 12 per box. Pallet: 60 boxes with 12 cartridges, 720 pieces. Storage Conditions / Shelf-Life 12 months form date of production if stored properly in original unopened, sealed and undamaged packaging in cool and dry conditions at temperatures between 0 C and +20 C. Protect from direct sunlight. All Sika AnchorFix -S cartridges have the expiry date printed on the label. Technical Data Density Curing Speed 1.7 kg/l (part A+B mixed). Temperature Open Time T gel Curing Time T cur 0 C 50 minutes 300 minutes +5 C 18 minutes 120 minutes +10 C 12 minutes 80 minutes +20 C 6 minutes 40 minutes +25 C 4 minutes 30 minutes +30 C 3 minutes 20 minutes For application at 0 C store cartridges at +5 C. Sag Flow Layer Thickness Thermal Stability Non-sag, even overhead. 3 mm max. Glass-Transition Temperature (TG): ~ +90 C (According to ISO75) 2 2/7
3 Mechanical / Physical Properties Compressive Strength ~ 74 N/mm 2 (According to ASTM D695) Design Terminology and Abbreviations: h ef f cm S cr C cr h O d O = effective anchorage depth (mm) = concrete compressive strength (N/mm2) = distance between anchors = distance of anchor from free edge (mm) = Hole depth (mm) = Drilled hole diameter (mm) d = Stud or bar nominal diameter (mm) N RK = Characteristic tensile load (kn) V RK = Characteristic shear load (kn) N rec = Recommended load (tension or shear)= N RK / V RK multiplied with a total safety factor according to local norms (kn) Rf cn = Close edge reduction factor, tension only Rf cv = Close edge reduction factor, shear only Rf s = Close spacing reduction factor, tension and shear Load capacity Data for all Thread Rods: Thread rod Hole diameter Hole depth Required edge distance to achieve Required edge distance to achieve Min. thickness of concrete member Characteristic load in concrete C 20 / 25 Recommended load in concrete C 20 / 25 d d O [mm] h O [mm] N rec C cr [mm] Nrec S cr [mm] h min [mm] N RK (kn) N rec (kn) M M M M M M Important Note: The load capacity of the threaded rod by itself must be verified. The anchor hole must be dry. Load Capacity Data for Reinforcing Bar Anchors: Requirements for the calculation of the characteristic load capacity: Reinforcing bar S500 ribbed (the load capacity of the reinforcing bar itself must also be verified) Min. concrete C20 / 25 The anchor hole must be dry Bar diameter d (mm) Hole diameter d O (mm) Minimum anchorembedment h min (mm) Equation for tensile load capacity: N RK = Equation for shear load capacity: V RK = h ef ,5 hef *do*fcm *0, /7
4 Reduction Factors for Close Edge Distances and Anchor Spacing: Reduced anchor spacing Rf s Close edge distances Rf c tension and shear tension shear Area of validity Area of validity 0.25 (s / h ef ) (c / h ef ) 1.5 c s Rf Rf s cn h hef ef Rf cv c h ef Important Note: The load capacity of the thread rod itself must also be verified. The anchor hole must be dry. Resistance Thermal Resistance Temperature resistance of the cured adhesive: +50 C long term, +80 C short term (1-2 hours) System Information Application Details Consumption / Dosage Material consumption per anchor in ml Anchor Ø mm Drill hole depth in mm Drill Ø mm Substrate Quality The indicated filling quantities are calculated without wastage. Wastage 10-50%. The filled quantity can be monitored during injection with the help of the scale on the catridge label. Mortar and concrete must be at the required strength. No need to be 28 days old. Substrate strength (concrete, masonry, natural stone) must be verified. Pull-out tests must be carried out if the substrate strength is unknown. The anchor hole must always be clean, dry, free from oil and grease etc.. Loose particles must be removed from the holes. Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.. Application Conditions / Limitations Substrate Temperature Ambient Temperature 0 C min. / +40 C max. Sika AnchorFix -S must be at a temperature of +5 C to +40 C for application. 0 C min. / +40 C max. Sika AnchorFix -S must be at a temperature of +5 C to +40 C for application. 4 4/7
5 Application Instructions Mixing Mixing Tools Part A : part B = 10 : 1 by volume Getting the cartridge ready: Unscrew and remove the cap Screw on the static mixer Place the cartridge into the gun and start application When the work is interrupted the static mixer can remain on the cartridge after the gun pressure has been relieved. If the resin has hardened in the nozzle when work is resumed, a new nozzle must be attached. 5 5/7
6 Application Method / Tools General Remarks: Drilling of hole with an electric drill to the diameter and depth required. Drill hole diameter must be in accordance with anchor size. The drill hole must be thoroughly cleaned with a round brush (brush at least 3x). The diameter of the brush must be larger than the diameter of the drill hole. The drill hole must be cleaned after each cleaning step with a blow pump or by compressed air, starting from the bottom of the hole. Important: use oil-free compressors! Pump approx. twice until both parts come out uniformly. Do not use this material. Release the gun pressure and clean the cartridge opening with a cloth. Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer. In any case avoid entrapping air. For deep holes extension tubing can be used. Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole. Important: the anchor must be placed within the open time. During the resin hardening time the anchor must not be moved or loaded. Wash tools immediately with Sika Colma Cleaner. Wash hands and skin thoroughly with warm soap water. Anchors in hollow blocks: Cleaning of Tools To fix anchors into hollow materials (bricks or blocks) perforated sleeves must be used. Note: with hollow material do not use rotary hammer drills. Clean and tools and application equipment with Sika Colma Cleaner immediately after use. Hardened and/or cured material can only be mechanically removed. 6 6/7
7 Construction Value Base Health and Safety Information Legal Notes All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data. The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request. Sika Kimia Sdn Bhd Lot 689 Nilai Industrial Estate Nilai, Negeri Sembilan DK MALAYSIA Phone: Fax: info@my.sika.com 7 7/7
TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's)
TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's) Sika AnchorFix-1 is a single cartridge, two component, mix-in-the-nozzle, fast curing, solvent and styrene free, methacrylate based chemical anchoring
More informationConstruction. Universal anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1. 1 Sika AnchorFix S 1/6
Product Data Sheet Edition 2014-01_1 Sika AnchorFix S Sika AnchorFix S Universal anchoring adhesive Product Description Styrenated polyester based two part anchoring adhesive. Construction Uses Characteristics
More informationPRODUCT DATA SHEET Sika AnchorFix -S
PRODUCT DATA SHEET UNIVERSAL ANCHORING ADHESIVE DESCRIPTION Styrenated polyester based 2-component anchoring adhesive. USES may only be used by experienced professionals. As a fast curing anchoring adhesive
More informationHigh-performance anchoring adhesive. n Styrene-free n Low odour n Low wastage n No transportation restrictions
Product Data Sheet Edition 23/12/2008 Identification no: 02 04 02 06 001 0 000020 Sika AnchorFix -2 Sika AnchorFix -2 High-performance anchoring adhesive Construction Description Uses Characteristics /
More informationPRODUCT DATA SHEET Sika AnchorFix -2+ Tropical
ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for arctic/cold climate conditions. USES may only be used by experienced
More informationHigh-performance Anchoring Adhesive
Technical Data Sheet Edition 3, 2009 Identification no. 02 04 02 06 001 0 000020 Version no. 0010 Sika Anchorfix -2 High-performance Anchoring Adhesive Description Solvent- and styrene free, epoxy acrylate
More informationPRODUCT DATA SHEET Sika AnchorFix -3001
PRODUCT DATA SHEET HIGH PERFORMANCE, PROFESSIONAL EPOXY ANCHORING ADHESIVE DESCRIPTION Solvent-free, thixotropic, 2-component, epoxy resinbased, high performance anchoring adhesive for threaded rods and
More informationPACTORep Fixer EASF AVAILABILITY. Working Hardening 3h 2h 1h30 1h Anchor Installation Resistance Admissible loads
PACTORep Fixer EASF Styrene Free Epoxyacrylate Injection Mortar DESCRIPTION PACTORep Fixer EASF is a high performance styrene free epoxyacrylate injection mortar for solid and hollow supports having a
More informationProduct Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages
Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages
More informationPRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)
PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and
More informationEJOT Chemical Anchoring Systems. High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete
EJOT Chemical Anchoring Systems High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete The Quality Connection www.ejot.co.uk EJOT Multifix VSF EJOT Multifix
More informationTECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG
TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG Sikadur 31 is a two component solvent-free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - Normal and
More informationSikadur -31 DW Rapid (VP)
Product Data Sheet Edition 21/05/2015 Identification no: 020204030010000038 Sikadur -31 DW Rapid (VP) 2-part epoxy adhesive tested for drinking water contact Product Description Uses Characteristics /
More informationTrutek TCM380 PRO. Trutek Fasteners Polska Al. Krakowska 55 Sekocin nowy Rasxyn Poland T:
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
More informationSikadur -Combiflex CF Adhesive Type N and Type R are thixotropic two part adhesives based on epoxy resins and fillers.
Construction Product Data Sheet Edition 14/08/2017 Identification no: 020703020030000002 Sikadur -Combiflex CF Adhesive Sikadur -Combiflex CF Adhesive 2-part epoxy adhesive Part of the Sikadur -Combiflex
More informationPRODUCT DATA SHEET Sikadur -31 DW
PRODUCT DATA SHEET 2-PART EPOXY ADHESIVE WITH APPROVAL FOR DRINKING WATER CONTACT DESCRIPTION 2-part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated
More informationConstruction. Adhesive for bonding Carbon Fibre & Steel reinforcement. Product Description. Tests
Product Data Sheet Edition 10/12/2014 Identification no: 02 04 01 04 001 0 000001 Sikadur -30 Adhesive for bonding Carbon Fibre & Steel reinforcement Construction Product Description Uses Characteristics
More informationStorage Conditions. Working & Loading Times
Product Data Sheet Edition 5.13.2015 Sika AnchorFix-2 Sika AnchorFix-2 High performance, two component adhesive anchoring system Description Where to Use Advantages Packaging Approvals Sika AnchorFix-2
More informationProduct Data Sheet Product n Description Uses tio tru Characteristics / C Advantages Tests Approval / Standards
Product Data Sheet Edition 01/02/2012 Identification no: 01 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Construction Product Description Uses Characteristics / Advantages
More information3-part thixotropic epoxy patching mortar
Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41
More informationConstruction. Adhesive for bonding reinforcement. Product Description. Tests. Product Data Sheet Edition 16 December 2014
Product Data Sheet Edition 16 December 2014 Sikadur -30 Adhesive for bonding reinforcement Product Description Sikadur -30 is a thixotropic, structural two part adhesive, based on a combination of epoxy
More informationTECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG
TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG Sikadur -31 is a two component solvent free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - 31CF Normal
More informationPF18 CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
PF18 CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM APPROVAL DOC TDS MSDS Technical Data Sheet JAN 2016 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
More informationConstruction. Sika AnchorFix-2 High performance, two component adhesive anchoring system. Product Data Sheet Edition
Product Data Sheet Edition 7.12.2016 Sika AnchorFix-2 Sika AnchorFix-2 High performance, two component adhesive anchoring system Description Where to Use Advantages Packaging Approvals Sika AnchorFix-2
More informationConstruction. Adhesive for bonding reinforcement. Product Description. Tests
Product Data Sheet Edition 02/09/2010 Identification no: 02 04 01 04 001 0 000003 Sikadur -30 LP Adhesive for bonding reinforcement Construction Product Description Uses Characteristics / Advantages Sikadur
More informationConstruction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description. Tests
Product Data Sheet Edition 05/01/2009 Identification no: 02 07 03 02 003 0 000002 Type N and Type R Sikadur -Combiflex CF Adhesive Type N and Type R Construction 2-part epoxy adhesive Part of the Sikadur
More informationUltra fast spray applied polyurethane membrane
Product Data Sheet Edition 2014-01_1 (formerly known as CV Spray) Ultra fast spray applied polyurethane membrane Construction Product Description Uses Characteristics / Advantages Product Data Test is
More informationConstruction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description
Product Data Sheet Version 2015-02-12 Identification no: 02 07 03 02 003 0 000002 Sikadur -Combiflex CF Adhesive Sikadur -Combiflex CF Adhesive 2-part epoxy adhesive Part of the Sikadur -Combiflex System
More informationInjectable hose for sealing construction joints in watertight structures
System Product Data Sheet Edition 2011-11_1 Injectable hose for sealing construction joints in watertight structures Construction Product Description Uses Characteristics / Advantages Tests Approval /
More informationPRODUCT DATA SHEET Sikadur -32 Normal
PRODUCT DATA SHEET 2-COMPONENT STRUCTURAL EPOXY BONDING AGENT PRODUCT DESCRIPTION is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers,
More informationSpray applied polyurea membrane
Product Data Sheet Edition 2011-10_1 (formerly known as Resitect 5000) Spray applied polyurea membrane Construction Product Description Uses Characteristics / Advantages Product Data is a two-part, elastic,
More informationWater resistant bonding agent and mortar additive
Product Data Sheet Edition 2011-10_1 Water resistant bonding agent and mortar additive Construction Product Description is a modified Styrene Butadiene Emulsion to be mixed with cement (neat) or cement
More informationSormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.
ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and
More informationSegmental bridge adhesive
Product Data Sheet Edition 16/07/2014 Identification no: 02 02 04 03 001 0 000004 (Template for local translation, only for internal use) Segmental bridge adhesive Construction Product Description Uses
More informationPage 9, issued on 03. February 2009 Threaded rod M8, M10, M12, M16, M20, M24, M27, M30 with washer and hexagon nut L df h h ef 0 tfix h min Reinforcing bar 8, 10, 12, 14, 16, 20, 25, 28, 32 acc. to Annex
More informationAC100-PRO. AC100-PRO Vinylester 160ML AC100-PRO Vinylester 300ML AC100-PRO Vinylester 360ML AC100-PRO Vinylester 410ML AC100-PRO 160ML AC100-PRO 300ML
Vinylester 160ML Vinylester 300ML Vinylester 360ML Vinylester 410ML 160ML 300ML 360ML 410ML Approvals and test reports POWERS TEST LABORATORY 0756-CPD-0236 EUROPEAN TECHNICAL APPROVAL ETA-08/0290 - ETAG
More informationFosroc Lokfix E75. High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates.
High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates. Re-usable Slow gel times allow for more complex procedures 24 month shelf life
More informationInjectable hose with integral valves for sealing construction joints in watertight structures
System Product Data Sheet Edition 2011-12_1 Injectable hose with integral valves for sealing construction joints in watertight structures Construction Product Description Uses Characteristics / Advantages
More informationTP EA. Product Description. Properties and Benefits. Applications. Reaction Resin Mortar Based on Epoxy Acrylate. Approvals / Certificates:
Approvals / Certificates: Product Description The TP EA is a 2-component reaction resin mortar based on an epoxy acrylate. This product may be used in combination of a hand-, battery- or pneumatic tool
More informationAnchorfix 294 DANA LIM A/S. Product Information: Reactive resin mortar; Vinylester-based, styrene free. Productdescription & use:
DK Product Information: Anchorfix 294 Reactive resin mortar; Vinylester-based, styrene free. Productdescription & use: Anchorfix 294 is a styrene free mortar of high quality for chemical mounting of treaded
More informationSOUDAFIX VE400-SF. Temperature -10 C (1) -5 C 0 C 5 C 10 C 20 C 30 C 35 C 40 C
Revision: 20/06/2014 Page 1 of 9 Technical Data: Base Consistency Curing system (1) Cartridge temperature = 15 C (2) Curing time on dry surface (20 C/65% R.H.) (x2 on wet surface) Specific Gravity Vinylester
More informationConstruction. 1-part high performance sealant for flooring. Product Description. Environmental Information. Product Data Sheet Edition _1
Product Data Sheet Edition 2012-03_1 1-part high performance sealant for flooring Product Description Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance.
More informationConstruction. High performance joint sealing system. Product Description. System Data Sheet Edition _1. 1 Sikadur Combiflex SG system 1/8
System Data Sheet Edition 2012-05_1 High performance joint sealing system Construction Product Description Uses High performance joint sealing system for construction, expansion and connection joints as
More informationMapefix PE Wall. Chemical anchor for masonry and light loads
Mapefix PE Wall Chemical anchor for masonry and light loads European Technical Approval ETAG 029 M8 M12 AREAS OF USE Mapefix PE Wall is an adhesive for chemically anchoring metal bars in holes made in
More informationHigh performance, 2 component adhesive anchor system use in cracked & uncracked concrete. Storage Conditions. Working & Loading Times
Product Data Sheet Edition 5.7.2015 Sika AnchorFix-3001 Sika AnchorFix-3001 High performance, 2 component adhesive anchor system use in cracked & uncracked concrete Description Where to Use Advantages
More information3-Part Epoxy Grouting System for Pile Capping
Product Data Sheet Edition: 10/10/2012 Identification no. Version no: GCC Sikadur -42 PC Sikadur -42 PC 3-Part Epoxy Grouting System for Pile Capping Product Description Uses Characteristics / Advantages
More informationFootfall sound dampening system for wood flooring
System Product Data Sheet Edition 2011-01_1 Sika AcouBond -System Sika AcouBond -System Footfall sound dampening system for wood flooring Construction System Description Uses Characteristics / Advantages
More informationPOLYESTER INJECTION MORTAR Good Quality and Competitve Price
Good Quality and Competitve Price Date of Issue: Feb 22, 2012 PRODUCT Good Use is a chemical anchor system based on the polyester mortar. The two parts are dispensed and mixed in one action through a static
More informationConstruction. 2-part epoxy impregnation resin. Product Description. Product Data 1 1/6. Tests. Form. Storage
Product Data Sheet Edition 2011-10_1 2-part epoxy impregnation resin Construction Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for SikaWrap fabric reinforcement
More informationR-KEM II with Threaded Rods for Masonry
R-KEM II with Threaded Rods for Masonry Universal polyester (styrene free) resin - European Approval for 15 substrates Product information Features and benefits The most convenient bonded anchor for general
More informationSikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.
Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin
More informationEuropean Technical Assessment. ETA 15/0226 of General Part TCM400PE, TCM600PE. Trade name of the construction product
Member of Wellington, 19 ES 08018 Barcelona Tel: (+34) 93 309 34 04 qualprod@itec.cat www.itec.cat www.eota.eu European Technical Assessment ETA 15/0226 of 17.04.2015 General Part Trade name of the construction
More informationMaterials Polyester Resin Anchors: Carbon Steel grade 5.8 Stainless Steel: AISI 316
Chemset Injection is a two component polyester resin anchor system in a coaxial cartridge with mixing nozzle. Developed for fixing awkward materials in hollow and solid sections where access may be difficult.
More informationR-KEM II with Threaded Rods for Masonry
R-KEM II with Threaded Rods for Masonry Universal polyester (styrene free) resin - European Approval for 15 substrates Product information Features and benefits The most convenient bonded anchor for general
More informationInject-TITE AW All-Weather
Product Description Inject-TITE AW is a two-component styrene free, acrylic system used for anchoring and doweling applications in uncracked concrete using threaded rod and rebar. May be used in temperatures
More informationFast Cure Acrylic Adhesive
Product Description ULTRABOND ASF-1000 is a two-component styrene free, acrylic system used for anchoring and doweling applications in uncracked concrete using threaded rod and rebar. It may be used in
More informationweber.anc 405 BFX formerly Conrep.405 BFX
1/ weber.anc 5 BFX formerly Conrep.5 BFX PURE EPOXY ANCHORING RESIN IN CARTRIDGE PRODUCT weber.anc 5 BFX is a two-component high strength pure epoxy chemical anchoring resin system. It is especially recoended
More informationConstruction. 2-part epoxy protective coating. Product Description. Product Data 1 1/5. Test. Form. Storage
Product Data Sheet Edition 2011-10_1 2-part epoxy protective coating Construction Product Description is a total solid (acc. test method of Deutsche Bauchemie*), two part epoxy resin coating. * German
More informationConstruction. 1-part floor joint sealant. Product Description. Product Data. Tests. Form. Storage
Product Data Sheet Edition 19/09/2011 Identification no: 01 05 01 01 005 0 000001 Sikaflex Floor Sikaflex Floor 1-part floor joint sealant Product Description is a moisture curing 1-part elastic sealant
More informationHilti HIT-RE 10 mortar Economical epoxy mortar for concrete
Hilti HIT-RE 10 mortar Economical epoxy mortar for concrete Injection mortar system Hilti HIT-RE 10 580 ml hard cartridge Benefits - Suitable for non-cracked concrete C20/25 to C50/60 - Suitable for dry
More informationConstruction. 2-part epoxy impregnation resin. Product Description. Product Data. Tests. Form. Product Data Sheet Edition 4 March 2015
Construction Product Data Sheet Edition 4 March 2015 2-part epoxy impregnation resin Product Description is a two part, thixotropic epoxy based impregnating resin / adhesive. Uses Impregnation resin for
More informationHilti HIT-RE 100 mortar with rebar (as anchor)
Injection mortar system Hilti HIT-RE 100 330 ml, 500 ml and 1400 ml foil pack Statik mixer rebar BSt 500 S Benefits - suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More information1-part polyurethane sealant for building joints
Product Data Sheet (Temporary) Edition 03/2010 Sikaflex -Construction (AP) 1-part polyurethane sealant for building joints Product Description Sikaflex -Construction (AP) is a one part, moisture curing,
More informationConstruction. Sikadur -42 (au) High strength pourable epoxy resin grout. Product Datasheet Edition 4 March Description. Uses.
Sikadur -42 (au) High strength pourable epoxy resin grout Description Uses Advantages Storage and Shelf Life Instructions for Use is a 3-component pourable or castable grout based on a solvent free epoxy
More informationConstruction. Solvent free elastic adhesive for Wood Flooring. Product Description. Product Data Sheet Edition _1. 1 SikaBond -52 Parquet 1/6
Product Data Sheet Edition 2012-07_1 Solvent free elastic adhesive for Wood Flooring Construction Product Description Uses Characteristics / Advantages is a one component, solvent free, fast curing elastic
More informationConstruction. Flexible PVC waterstops. Product Description. Product Data. Tests. Form. Storage. Technical Data
Construction Product Data Sheet Edition 2016-07_1 Flexible PVC waterstops Product Description Uses Characteristics / Advantages Flexible PVC waterstops used to seal construction and expansion joints in
More information2-part epoxy impregnation resin
Product Data Sheet Edition 21/05/2015 Identification no: 020206040010000006 2-part epoxy impregnation resin Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for
More informationDesignated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011
More information1-part polyurethane pourable self levelling floor joint sealant
Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /
More informationPRODUCT DATA SHEET Sikafloor -81 EpoCem New HC
PRODUCT DATA SHEET 3-PART CEMENT AND EPOXY COMBINATION MORTAR FOR SELFSMOOTHING FLOOR SCREEDS OF 1.5 TO 3 MM DESCRIPTION is a three part, epoxy modified cementitious, fine textured mortar for self smoothing
More information3-component epoxy self-smoothing screed
Construction Product Data Sheet Edition 26/07/2016 Identification no: 01 08 01 02 050 0 000017 3-component epoxy self-smoothing screed Product Description Uses Characteristics / Advantages Product Data
More informationConstruction. 2-part epoxy roller and seal coat. Product Description. Product Data. Form. Storage. Product Data Sheet Edition _1
Construction Product Data Sheet Edition 2015-12_1 2-part epoxy roller and seal coat Product Description is a two part, economic, solvent-free coloured epoxy resin. Uses Roller coat for concrete and cement
More informationDeep pour (up to 150 mm), multi purpose epoxy grouting system
Product Data Sheet Edition 27 September 2017 Sikadur -42 HP Deep pour (up to 150 mm), multi purpose epoxy grouting system Product Description Sikadur -42 HP is a three-component, multi-purpose, moisture
More informationHigh-Strength Anchoring Epoxy
Product Description ULTRABOND is a 2-component, : mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 F to
More informationCHARACTERISTICS / ADVANTAGES
PRODUCT DATA SHEET Water resistant, S.B.R. bonding agent and mortar additive PRODUCT DESCRIPTION Sika Latex is a modified styrene butadiene emulsion that is mixed normally with cement to form a bonding
More informationHilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer
with HIT-V Hilti HIT-HY 200 with HIT-V Injection Mortar System Benefits Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer HIT-V rods HIT-V (Zinc) HIT-V-F (Gal) HIT-V-R
More informationHilti HIT-ICE with rebar
Hilti HIT-ICE Injection mortar system Benefits Hilti HIT-ICE 296 ml cartridge Statik mixer rebar BSt 500 S - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable for
More information2-part, electrostatic conductive epoxy coating
Product Data Sheet Edition 2014-05_1 2-part, electrostatic conductive epoxy coating Construction Product Description Uses Characteristics / Advantages Test Approval /Standards Product Data Form is a two
More informationInject-TITE FS Fast-Set
Inject-TITE FS Product Description Inject-TITE FS is a 2-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures
More informationPRODUCT DATA SHEET Sikadur -42 HE
PRODUCT DATA SHEET 3-PART, HIGH PERFORMANCE EPOXY GROUTING SYSTEM PRODUCT DESCRIPTION is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures
More informationLiquid applied polyurea hybrid membrane
Product Data Sheet Edition 07/08/2008 Identification no: 02 06 07 01 001 0 000015 Sikalastic -842 BG Liquid applied polyurea hybrid membrane Product Description Sikalastic -842 BG is a two part, highly
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More information1-part high performance sealant for flooring
Product Data Sheet Edition 26/07/2007 Identification no: 02 05 01 01 005 0 000001 Sikaflex PRO-3 WF 1-part high performance sealant for flooring Construction Product Description Uses Characteristics /
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 31/10/2006 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages
More informationRESIPLUS TQ-3. Health & Safety For health and safety information please refer to the relevant Safety Data Sheet.
RESIPLUS TQ-3 Description Resiplus TQ-3 based two-component bonded anchoring system for stress-free fixing into solid and hollow substrates. VE resin produces higher bond strength than polyester and is
More informationCarbon fibre shear links for structural strengthening
Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 01 004 0 000002 Sika CarboShear L Carbon fibre shear links for structural strengthening Construction System Description Uses Sika CarboShear
More informationPRO-POXY 400 A.11. New technology for all weather anchoring... PRO-POXY 400! BENEFITS:
PRO-POXY 400 ALL WEATHER EPOXY ACRYLATE HYBRID ANCHORING GEL BENEFITS: Guns & Performs to -15 F STYRENE FREE! Meets performance requirements of ASTM-C-881; Types I, II*, IV & V * ; Classes A, B & C; Grade
More informationSVM-PSC Polyester resin for use in concrete
SVM-PSC Polyester resin for use in concrete Bonded anchor with anchor rod made of galvanized steel or stainless steel of sizes M8 to M30 for use in non-cracked concrete Basic product information Features
More information2-part epoxy self-smoothing and broadcast system. Sikafloor -263 SLHC is a two part, economic, multi purpose binder based on epoxy resin.
Product Data Sheet Edition 2011-11_1 2-part epoxy self-smoothing and broadcast system Construction Product Description is a two part, economic, multi purpose binder based on epoxy resin. Uses Self-smoothing
More informationConstruction. Carbon fiber shear links for structural strengthening. System Description. (Template for local translation, only for internal use)
Product Data Sheet Edition 12/08/2008 Identification no: 02 04 01 01 004 0 000002 (Template for local translation, only for internal use) Sika CarboShear L Carbon fiber shear links for structural strengthening
More informationExtended Working Time Epoxy
Product Description ULTRABOND 2 is a two-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40
More informationSHEP POXY ROADS & HIGHWAYS FAST SET HIGH MODULUS, STRUCTURAL, EPOXY GEL
SHEP POXY ROADS & HIGHWAYS FAST SET HIGH MODULUS, STRUCTURAL, EPOXY GEL Product Description SHEP POXY ROADS & HIGHWAYS FAST SET is a 2- component structural epoxy system that offers exceptional strength
More informationCONCRESIVE 1450i. High performance styrene free epoxyacrylate based fixing compound
High performance styrene free epoxyacrylate based fixing compound Description is a 2 component advanced pure epoxy fixing & anchoring mortar. Supplied in a self mixing cartridge CONCRESIVE 1450i combines
More informationUltra Fast Curing Polyurethane Waterproofing Membrane System
Product Data Sheet Edition 2011-10_1 (previously known as Ever Coat SP-100) Ultra Fast Curing Polyurethane Waterproofing Membrane System Product Description is a two-part, elastic, crack-bridging, rapid-curing
More informationVF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER
CHEMICAL ANCHORING SYSTEMS TECHNICAL DATA SHEET VF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER STYRENE FREE - STYRENE FREE - LOW VOC VF22PRO is a versatile high-strength two-part
More informationRoofing. Polymeric sheet for roof waterproofing. Product Description. Tests. Product Data Sheet Edition _1
Product Data Sheet Edition 2014-09_1 Polymeric sheet for roof waterproofing Product Description (thickness 1.5 mm) is a Polyester reinforced, multi-layer, synthetic roof waterproofing sheet based on premium-quality
More informationBonding Primer and Reinforcement Corrosion Protection
Product Data Sheet Edition 24/07/2012 Identification no: 01 03 02 01 001 0 000001 SikaTop Armatec -110 EpoCem Bonding Primer and Reinforcement Corrosion Protection Construction Product Description SikaTop
More informationConstruction. 1-part elastic sealant for the internal and external caulking of wooden floors. Product Description. Product Data. Form.
Product Data Sheet Edition 2012-10_1 1-part elastic sealant for the internal and external caulking of wooden floors Construction Product Description Uses Characteristics / Advantages Product Data is a
More information