W A T L O W. Application. Over 704 C (1300 F) Carburizing hardening. Inconel 600, Type 446 SS. Hot blast main Inconel 600 Stove trunk Inconel 600
|
|
|
- Rosemary Burns
- 5 years ago
- Views:
Transcription
1 Inconel and Monel are registered trademarks of the Special Metals Corporation. Hexoloy is a registered trademark of Carborundum Company. Hastelloy C is a registered trademark of Haynes International. Heat treating Annealing Up to 704 C (1300 F) Over 704 C (1300 F) Carburizing hardening Up to 816 C (1500 F), 816 to 1093 C (1500 to 2000 F) Nitriding salt baths Cyanide Nickel (CP) Neutral High speed Iron and steel Blast furnaces Downcomer Stove dome Silicon carbide Hot blast main Inconel 600 Stove trunk Inconel 600 Stove outlet flue Open hearth Flues and stack Checkers Inconel 600, Cermets Waste heat boiler Billet heating slab heating and butt welding Up to 1093 C (2000 F) Silicon ceramic carbide* Bright annealing batch Top work temperature Not required (use bare Type J thermocouple) Bottom work temperature Continuous furnace section Inconel 600, ceramic* Forging Silicon carbide, ceramic* Soaking pits Up to 1093 C (2000 F) Inconel 600 Silicon ceramic carbide* Nonferrous metals Aluminum Melting Hexoloy Heat treating Brass or bronze Not required (use dip-type thermocouple) Lead, black steel Magnesium, cast iron Tin Extra heavy carbon steel Zinc Extra heavy carbon steel Pickling tanks Chemical lead Cement Exit flues Kilns, heating zone Inconel 600 Ceramic Kilns and silicon carbide* Dryers Silicon carbide, black steel Vitreous enameling Barium chloride, all concentration, 21 C (70 F) Monel, Hastelloy C 139
2 Nichrome is a registered trademark of the Driver-Harris Co. Dow therm is a registered trademark of the Dow Chemical Corporation. Barium hydroxide, all concentration, 21 C (70 F) Barium sulphite Nichrome, Hastelloy C Brines Monel Bromine, Monel Butadiene Butane Butylacetate Monel Butyl alcohol Calcium chlorate, dilute, 21 to 66 C (70 to 150 F) Calcium hydroxide 10 to 20%, 100 C (212 F), Hastelloy C 50%, 100 C (212 F), Hastelloy C Carbolic acid, all, 100 C (212 F) Carbon dioxide, wet or dry 2017-T4 aluminum, Monel, nickel Chlorine gas Dry, 21 C (70 F), Monel Moist, -7 to 100 C (20 to 212 F ) Hastelloy C Chromic acid, 10 to 50% 100 C (212 F), Hastelloy C (all concentrations) Citric acid 15%, 21 C (70 F), Hastelloy C (all concentrations) 15%, 100 C (212 F), Hastelloy C (all concentrations) Concentrated, 100 C (212 F), Hastelloy C (all concentrations) Copper nitrate Copper sulphate Cresols Cyanogen gas Dow therm Ether Ethyl acetate Monel, Ethyl chloride, 21 C (70 F), low carbon steel Ethyl sulphate, 21 C (70 F) Monel Ferric chloride, 5%, 21 C (70 F)to boiling, Hastelloy C Ferric sulphate, 5%, 21 C (70 F) Ferrous sulphate, dilute, 21 C (70 F) Formaldehyde Formic acid, 5%, 21 to 66 C (70 to 150 F ) Freon Monel Gallic acid, 5%, 21 to 66 C (70 to 150 F ) Monel Gasoline, 21 C (70 F), low carbon steel Glucose, 21 C (70 F) Glycerine, 21 C (70 F) Glycerol Hydrobromic acid, 98%, 100 C (212 F) Hastelloy B Hydrochloric acid 1%, 5% 21 C (70 F) Hastelloy C 1%, 5% 100 C (212 F) Hastelloy B 25%, 21 to 100 C (70 to 212 F) Hastelloy B Hydrofluoric acid, 60%, 100 C (212 F) Hastelloy C, Monel Hydrogen peroxide, 21 to 100 C (70 to 212 F) Types 316 SS, 304 SS Hydrogen sulphide, wet and dry 140
3 Glass Fore hearths and feeders Platinum thimble Lehrs Tanks Roof and wall Flues and checkers Paper Digesters, Petroleum Dewaxing Towers Transfer lines Factioning column Bridgewall Power Coal-air mixtures 304 SS Flue gases, Preheaters, Steel lines Types 347 or 316 SS Water lines Boiler tubes Types 304, 309, or 310 SS Gas producers Producer gas Water gas Carburetor Superheater Tar stills Incinerators Up to 1093 C (2000 F) Ceramic (primary) Hexoloy (secondary)* Food Baking ovens Charretort, sugar Vegetables and fruit Chemical Acetic acid 10 to 50%, 21 C (70 F) Type 304, Hastelloy C, Monel 50%, 100 C (212 F) Type 316, Hastelloy C, Monel 99%, 21 to 100 C (70 to 212 F) Type 430, Hastelloy C, Monel Alcohol, ethyl, methyl 21 to 100 C (70 to 212 F) Type 304 Ammonia All concentration 21 C (70 F) Types 304, 316 SS Ammonium chloride All concentration 100 C (212 F) Types 316 SS, Monel Ammonium nitrate All concentration 21 to 100 C (70 to 212 F) Ammonium sulphate, 10% to saturated 100 C (212 F) 141
4 Iodine, 21 C (70 F) Lactic acid 5%, 21 C (70 F), 316 SS 5%, 66 C (150 F) 10%, 100 C (212 F) Magnesium chloride 5%, 21 C (70 F) Monel, nickel 5%, 100 C (212 F) Nickel Magnesium sulphate, hot and cold Monel Muriatic acid, 21 C (70 F) Naptha, 21 C (70 F) Natural gas, 21 C (70 F), 317 SS Nickel chloride, 21 C (70 F) Nickel sulphate, hot and cold Nitric acid 5%, 21 C (70 F) 20%, 21 C (70 F) 50%, 21 C (70 F) 50%, 100 C (212 F) 65%, 100 C (212 F) Concentrated, 21 C (70 F) Concentrated, 100 C (212 F) Nitrobenzene, 21 C (70 F) Oleic acid, 21 C (70 F) Oleum, 21 C (70 F) Oxalic acid 5% hot and cold 10%, 100 C (212 F) Monel Oxygen 21 C (70 F) Steel Liquid SS Elevated temperatures SS Palmitic acid Pentane Type 340 SS Phenol Phosphoric acid 1%, 5%, 21 C (70 F) 10%, 21 C (70 F) 10%, 100 C (212 F) Hastelloy C 30%, 21 to 100 C (70 to 212 F) Hastelloy B 85%, 21 to 100 C (70 to 212 F) Hastelloy B Picric acid, 21 C (70 F) Potassium bromide, 21 C (70 F) Potassium carbonate, 1%, 21 C (70 F) Potassium chlorate, 21 C (70 F) Potassium hydroxide 5%, 21 C (70 F) 25%, 100 C (212 F) 60%, 100 C (212 F) Potassium nitrate 5%, 21 C (70 F) 5%, 100 C (212 F) 142
5 Potassium permanganate, 5%, 21 C (70 F) Potassium sulphate, 5%, 21 C (70 F) Potassium sulphide, 21 C (70 F) Propane, low carbon steel Pyrogallic acid Quinine bisulphate, dry Quinine sulphate, dry Seawater Monel or Hastelloy C Salicylic acid Nickel Sodium bicarbonate All concentration, 21 C (70 F) 5%, 66 C (150 F) Sodium carbonate, 5%, 21 to 66 C (70 to 150 F) Sodium chloride 5%, 21 to 66 C (70 to 150 F) Saturated, 21 to 100 C (70 to 212 F), Monel Sodium fluoride, 5%, 21 C (70 F) Monel Sodium hydroxide, Hastelloy C Sodium hypochlorite, 5% still, Hastelloy C Sodium nitrate, fused Sodium peroxide Sodium sulphate, 21 C (70 F) Sodium sulphide, 21 C (70 F) Sodium sulphite, 30%, 66 C (150 F) Sulphur dioxide Moist gas, 21 C (70 F) Gas, 302 C (575 F ) Sulphur Dry molten Wet Sulphuric acid 5%, 21 to 100 C (70 to 212 F) Hastelloy B, 316 SS 10%, 21 to 100 C (70 to 212 F) Hastelloy B 50%, 21 to 100 C (70 to 212 F) Hastelloy B 90%, 21 C (70 F) Hastelloy B 90%, 100 C (212 F) Hastelloy D Tannic acid 21 C (70 F), Hastelloy B Tartaric acid 21 C (70 F) 66 C (150 F) Toluene 2017-T4 aluminum, low carbon steel Turpentine Whiskey and wine, nickel Xylene Copper Zinc chloride Monel Zinc sulphate 5%, 21 C (70 F) Saturated, 21 C (70 F) 25%, 100 C (212 F) Reference charts and tables on pages 139 to 143 courtesy of the American Society for Testing and Materials. Taken from publication MNL 12, Manual on the Use of Thermocouples in Temperature Measurement. 143
CORROSION DATA GUIDE
CORROSION DATA GUIDE This guide was developed from general corrosion literature, standard references and field experiences. Recommendations for corrosive service are given to assist the user in making
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
Stainless Steel and Metal Hose (Section III)
Stainless and Metal Hose (Section III) Part No. Description Page No. SS3161 Single Braid Stainless Hose 2 SS3162 Double Braid Stainless Hose 3 Chlorine Transfer Hose 4 Correction Factors for Elevated Temperatures
Applications / Compatibility Guide
Applications / Compatibility Guide Hunsworth Lane, Cleckheaton, West Yorkshire. BD19 3UJ Telephone: +44 1274 878787 Fax: +44 1274 862588 e.mail: smith@novussealing.com Website: www.novussealing.com If
Preferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
Chemical Resistance and Material Selection Guide for Drum Pumps
esistance and Material Selection Guide for Drum Pumps The information in the following guide lists the corrosion resistance of four materials used in the drum pump outer tubes. Additional wetted materials
Temperature Sensing Standard Thermowells for Industrial Applications. Velocity Ratings of Wells. View Product
Standard for Industrial Applications Well failures, in most cases, are not due to the effects of pressure and temperature. The calculations necessary to provide adequate strength under given conditions
Chemical Resistance and Material Selection Guide for FTI Drum Pumps
esistance and Material Selection Guide for FTI Drum Pumps The information in the following guide lists the corrosion resistance of four materials used in FTI drum pump outer tubes. Additional wetted materials
PRODUCT DATA SHEET PDS A133_E. Metric thread M 1.5 pitch CEI EN CEI EN Pg thread DIN Dimensions DIN
Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262 Ref. Hole min-max Spanner Spanner min-max Quantity Nickel Head Body Box/Bag Plated Brass 2003M1221N M12x1,5 12,5 4-6 13 14 5 13-16 500/100 2003M1621N
indicates possibility of environmental stress cracking
CHEMCAL RESSTANCE CHART This Resistance chart is to be used as a guide to assist you in determining the suitability of LLDPE Rotathene for storing the chemical indicated. Storage is a critical application
Chemical Resistance Table Polypropylene
Description: Polypropylene Chemical Resistance Table Polypropylene Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in
Chemical Resistance Table KPC Polypropylene
Scope and Field Application This document establishes a provisional classification of the chemical resistance of polypropylene with respect to about 180 fluids. It is intended to provide general guidelines
Polypropylene Chemical Resistance Table Polypropylene
ART 006 11.07.2001 Ed. 4 Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in use in various countries, derived from both
technical information
CHEMICAL RESISTANCE TABLES Version: 19-08-10 ADD Resins and Chemicals (Pty) Ltd Distribute a comprehensive range of unsaturated polyester resins for chemical resistance applications. The resins recommended
EC Duro-Bond Rubber Sheet Linings
EC Duro-Bond Rubber Sheet Linings Description Both Soft Natural Rubber and Hard Natural Rubber Linings are offered by Electro Chemical. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180
Thermowells General Specifications
Thermowells General Specifications Material - The Longevity Factor In general, the thermowell material chosen for the installation is governed mainly by the corrosion conditions the well will face. Recommended
Thermowells PRODUCT REFERENCE GUIDE. toll free Toronto Montréal Québec Calgary Edmonton Vancouver
PRODCT REFERENCE GIDE are principally used with Thermocouples, RTDs (Resistance Temperature Detectors) and Bimetal Thermometers in applications where it is necessary to measure temperature at high pressure
AP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2008-2009 Other 1. Sulfur trioxide gas is bubbled into a solution of sodium hydroxide. (2005) 2. Hydrogen iodide gas is bubbled into a solution of lithium carbonate.
Chemical resistance of Saniclad PVC products
resistance of Saniclad PVC products The table that appears in the following pages lists the resistance of SAI CLAD PVC sheets to a number of commonly encountered chemicals and other corrosive media at
ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES
1 ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES The main advantages and improvements in drainage networks that will be obtained by the use of PE MAGNUM pipes, in comparison to PVC pipes are: 1.
Ocal. PVC-Coated Products. Products for corrosive environments
Ocal TM Products for corrosive environments Polymeric Fixtures for Class I, Zone 2, Groups IIC, IIB, IIA, Wet and Marine Locations Hazlux 1 HID, Mogul Base, 50-175W Enclosed and gasketed Polymeric (fiberglass-reinforced
Surface Protective Systems
Surface Protective Systems Technical information TI 374 Expansion joint filler, especially suitable for the corrosion protection Base Polyurethane Material Group Mortars, Jointing Materials Description
Thermowells and Assemblies
and Assemblies HA136712 Page 5-1 and Assemblies Introduction provide protection for thermocouples in pressure vessels and pipelines. A thermowell permits checking and replacing the thermocouple without
AP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2009-2010 Other 1. Pure solid phosphorus (white form) is burned in air. (2002) 2. Sulfur dioxide gas is bubbled into distilled water. (2001) 3. A drop of potassium
Please note that the Chemical Resistance Chart is intended for drainage systems only.
The NewAge Epoxy Cast Iron Soil Pipe System offers several advantages over plastic systems while providing similar chemical resistance for many applications. Owners recognize NewAge Cast Iron Soil Pipe
CHEMICALS ALCOHOLS BASES
ACIDS Acetic Acid Acetic Acid Glacial Acetic Acid, Acrylic Acid Aqua Regia Benzene Sulfonic Acid Benzoic Acid Boric Acid Carbolic Acid Carbonic Acid Chloroacetic Acid Chlorosulfonic Acid D D D Chromic
ICORENE Chemical Resistance
ICO Polymers Technical Centre 3 route de la Grande Paroisse 77130 Montereau Fault Yonne Tel: 00 33 1735361 / Fax: 00 33 164324467 ICORENE Resistance resistance of high and low density polyethylene Based
Industrial Fiberglass Specialties, Inc. 521 Kiser Street Dayton, OH Tel: Fax:
08-13-2003 Page #1 of 13 Temperature ( o F) for Acetaldehyde --- 100 100 Acetic Acid #10 150 150 Acetic Acid 10-100 CM CM Acetic Anhydride --- 100 120 Acetone --- 120 120 Acetonitrile --- 120 120 Acetophonone
Guide to Safe Handling & Storage of Hazardous Materials
Guide to Safe Handling & Storage of Hazardous Materials I. ACIDS VI. PYROPHORICS II. BASES (CAUSTICS) VII. PEROXIDE FORMING CHEMICALS III. FLAMMABLES VIII. TOXIC CHEMICALS IV. OXIDIZERS IX. CARCINOGENS
AP* CHEMISTRY EQUATIONS BY TYPE
AP* CHEMISTRY EQUATIONS BY TYPE Double Replacement 1. Hydrogen sulfide is bubbled through a solution of silver nitrate. 2. An excess of sodium hydroxide solution is added to a solution of magnesium nitrate.
DMR Srl Telefono:
Anti-Slip ANTI SLIP PRODUCT Product Specification SPECIFICATION Identification of the Product & the Company Product Name: Company Name: Anti-Slip Category - Glass Reinforced Plastic (GRP) safe access products
HDPE Chemical Resistance Guide
A Acetaldehyde S O Acetic acid (1-10%) S S Acetic acid (10-60%) S O Acetic acid (80-100%) S O Acetic anhydride S S Acetone S S Acids (aromatic) S S Acrylic emulsions S S Adipic acid S S Aluminum chloride
Our tapered thermowells provide greater rigidity than straight shank styles. They are well-suited to applications of high fluid velocity.
-8-77-5646 Thermo-ouple Products o. Included in our thermowell series are standardized wells of threaded, NI flanged, Van tone and Weld-in types. Threaded wells are made in readily welded or brazed materials
Conductive Leakage detectors of the LeakConductive range. with electrode and relay
Conductive Leakage detectors of the LeakConductive range with electrode and relay MEL 6 and MEL 6-Z10 conductive mat electrodes Conductive mat electrodes are designed to signal via a connected conductive
SERIES SEB Braided Flexible Metal Sweat Connectors (Bronze Hose with Bronze Braid and Copper Female Ends).
SERIES SEB - 6201 Braided Flexible Metal Sweat Connectors ( Hose with Braid and Copper Female Ends). Table 6: Sizes Offset Working Pressures Weights Expansion Joint Size: ID X Length Stock Lateral Working
CHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC JACKET MATERIAL
CHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC JACKET MATERIAL Acetaldehyde D Ammonia, liquid Acetamide D Ammonia Nitrate B Acetate Solvent D Ammonium Bifluoride Acetic Acid, D Ammonium Carbonate Glacial
Surface drainage systems introduction. Area (m2) Fig. 4 31,5 28,5 25,5 22,5 19,5 16,5 13,5 10,5 7,5 4,5 1,5
31,5 30 125 mm/hours 100 mm/hours 75 mm/hours 28,5 27 25,5 24 22,5 50 mm/hours 40 mm/hours 21 19,5 18 16,5 15 13,5 12 7. catch BaSinS covers GrillS 8. rainwater GullieS Area (m2) Total discharge qt (l/sec)
CHEMISTRY FALL 2005 MSDS
CHEMISTRY FALL 2005 Aluminum 1.5 kg Aluminum chloride, anhydrous, 98.5% 0.2 kg Aluminum chloride 6H 2 O 0.5 kg Aluminum hydroxide 0.5 kg Aluminum nitrate 0.5 kg Aluminum sulfate 0.5 kg Ammonia, concentrated
Atlas Minerals & Chemicals, Inc. FURATHANE MORTAR. 5-33PI ( ) Supersedes 5-33PI (7-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-33PI (6-03 2 ) Supersedes 5-33PI (7-02) FURATHANE MORTAR DESCRIPTION FURATHANE MORTAR is a 100% carbon filled, specially formulated furan mortar for chemical
Chemical Compatibility Reference Chart
Chemical Compatibility Reference Chart PEEK Polyetherether Ketone (PEEK) Chemical Compatibility Chart: Check the chemical compatibility of PEEK with various chemicals, solvents, alcohols and other products.
Compounds & Reactions Week 1. Writing Formulas & Balancing Equations. Write the chemical formula for each molecular (covalent) compound.
Compounds & Reactions Week 1 Name Writing Formulas & Balancing Equations Write the chemical formula for each ionic compound. 1. Lithium fluoride 2. Copper (II) chloride 3. Manganese (II) oxide 4. Potassium
CHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC & EPN JACKET MATERIAL. C - Moderate effect - Fair. D - Severe effect - Not recommended.
R PROTECTOWIRE FireSystems CHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC & EPN JACKET MATERIAL Over 60Years OF SERVICE Acetaldehyde D A Ammonia, liquid A2 B1 Acetamide D A Ammonia Nitrate B D Acetate
ATTACHMENT 3. Firestone Geomembrane Chemical Resistance Chart
ATTACHMENT 3 Firestone Geomembrane Chemical Resistance Chart Firestone Geomembrane exposure to these chemicals causes no swelling, softening or surface deterioration of the membrane. Acetamide Acryimide
Technical Guide WM1.7. hygrade.co.nz 0800 HYGRADE ( ) Applications. Product Attributes. Approvals/Standards. Quality.
Technical Guide WM1.7 Superlit GRP Pipe For over 50 years Superlit have successfully serviced the Water & Waste industry, manufacturing high quality Fiberglass pipes & fittings for a wide range of uses.
Superlit GRP Pipe. Technical Guide W1.7
Scan for more information Superlit GRP Pipe Technical Guide W1.7 For over 50 years Superlit have successfully serviced the Water and Waste industry, manufacturing high quality Fiberglass pipes and fittings
Technical Data. of VR and PolyWear Products
Technical Data PolyConversions, Inc. 505 Condit Drive Rantoul,IL 61866 217-893-3330 888-893-3330 info@polycoa.com www.polycoa.com Chemical Resistance TM TM of VR and PolyWear Chemical or olvent Concentration
Plastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0) FAX: +44 (0)
Plastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0)1268 571116 FAX: +44 (0)1268 560027 sales@plastex.co.uk THE CHEMICAL RESISTANCE OF P.V.C. November 2003 Introduction
Corrosion Resistant Chain Products. Stainless Steel Silver Shield CR Series Nickel-Plated
3 Corrosion Resistant Chain Products Stainless Steel Silver Shield CR Series Nickel-Plated 2 Drives Corrosion and Moisture Resistant Chains Drives, LLC headquartered, with manufacturing facilities in Fulton,
SIGRAFLEX Gaskets P Resistance to Chemical Media
SIGRAFLEX Gaskets P Resistance to Chemical Media Chemical Resistance of SIGRAFLEX Flexible Graphite, Stainless Steel and PTFE A distinction is made between four cases: 1. Resistant 2. Not resistant 3.
S.I. No. 279 of 2006 ENVIRONMENTAL PROTECTION AGENCY ACT 1992 (ESTABLISHED ACTIVITIES) ORDER 2006
S.I. No. 279 of 2006 ENVIRONMENTAL PROTECTION AGENCY ACT 1992 (ESTABLISHED ACTIVITIES) ORDER 2006 I, Dick Roche, Minister for the Environment, Heritage and Local Government, in exercise of the powers conferred
H&F MANUFACTURING CORPORATION Phase-2 PVC H&F MANUFACTURING CORPORATION 116 RAILROAD DRIVE IVYLAND PA 18974
H&F MANUFACTURING CORPORATION 800.474.2732 www.hfmfgcorp.com Phase-2 PVC H&F MANUFACTURING CORPORATION 116 RAILROAD DRIVE IVYLAND PA 18974 Industrial Light Industrial Phase-2 PVC Corrugated Siding, Roofing
CHEMISTRY. SCIENCE Paper 2. (Two hours) You will not be allowed to write during the first 15 minutes.
CHEMISTRY SCIENCE Paper 2 (Two hours) Answers to this Paper must be written on the paper provided separately. You will not be allowed to write during the first 15 minutes. This time is to be spent in reading
SENSORS LIGHT CURTAINS SG-IP69K SERIES SAFETY ACCESSORIES FEATURES APPLICATIONS CARATTERISTICHE
LIGHT CURTAINS SAFETY ACCESSORIES SG-IP69K SERIES The SG-IP69K accessory, is a PMMA acrylic tube used to protect and seal the safety light curtains of SG2, SG4 and SG BODY COMPACT series. Thanks to SG-
PRODUCT DESCRIPTION FREEZE LINE. pipes and fittings for cooling fluids
5 The AIRCOM Freezeline system has been designed and manufactured for use in Coolant transport and distribution systems. The materials and production technology used have generated a System that perfectly
tech.topic Chemical Resistance of Polyethylene Chemical or Solvent Concentration
Chemical or olvent Concentration Acetaldehyde 100% O Acetic Acid (Glacial) Conc. O Acetic Anhydride Acetic Acid 1-10% Acetic Acid 10-60% O Acetic Acid 80-100% O Acetone Acetone 100% Acrylic Emulsions Allyl
PRODUCT DATA SHEET (rev. 2.12/2017)
PRODUCT DATA SHEET (rev. 2.12/2017) 1. Name PE-RT/EVOH/PE-RT floor-heating multilayer pipe 2. Product features and intended use The multilayer pipe PE-RT/EVOH/PE-RT is designed and manufactured by Capricorn
EPIC J3413. Uniclass L L2123. CI/SfB (52.5) In6. The most advanced drainage system of its kind. ACO Qmax. Hydraulics and Legislation
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) In6 The most advanced drainage system of its kind ACO max Hydraulics and Legislation ACO max System HYRAULICS & LEGISLATION Overview Channel drainage hydraulics
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS SeamTek Type 4 Epoxy Quartz Flooring System (1/8 ) Section 09700 800-638-9874 www.lspinc.com Part 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 800-638-9874 www.lspinc.com Part 1 - GENERAL SeamTek Type 3 Healthcare Epoxy Quartz Flooring System (3/16 ) Section 09700 1.01 RELATED DOCUMENTS A. Drawings and general provisions
TECHNICAL SPECIFICATIONS
Part 1 - GENERAL TECHNICAL SPECIFICATIONS SeamTek Type 3 Epoxy Quartz Flooring System (3/16 ) Section 09700 800-638-9874 www lspinc com 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
Technical. Corrosion Guide for Electric Immersion Heaters. Terminal Enclosures
Corrosion Guide for Electric Immersion Heaters Corrosion Guide The Corrosion Guide on the following pages provides suggested sheath materials for many applications. While it is by no means complete, the
HEADING DESCRIPTION OF GOODS RATE OF DUTY I - CHEMICAL ELEMENTS
I - CHEMICAL ELEMENTS 28.01 Fluorine, chlorine, bromine and iodine. 2801.10.00 Chlorine 2801.20.00 Iodine 2801.30.00 Flourine; bromine 2802.00.00 Sulphur, sublimed or precipitated; colloidal sulphur. Free
PRODUCT DATA SHEET (rev. 2.12/2017)
PRODUCT DATA SHEET (rev. 2.12/2017) 1. Name PE-RT/EVOH/PE-RT installation multilayer pipe 2. Product features and intended use The multilayer pipe PE-RT/EVOH/PE-RT is designed and manufactured by Capricorn
List of dangerous and non-dangerous wastes which can be received and treated at Hydrometal
Authorisations List of dangerous and non-dangerous wastes which can be received and treated at Hydrometal Authorisation of "Députation Permanente du Conseil Provincial de Liège» in its «meeting» of 01
Chemical Resistance Chart For Protectowire EPC, CTI & XLT Jacket Materials
Chemical Resistance Chart For Protectowire EPC, CTI & XLT Jacket Materials - Severe effect - Not recommended. Acetaldehyde Ammonia, liquid Acetamide Ammonia Nitrate B Acetate Solvent Ammonium Bifluoride
Profiles in thermoplastics rubber TPeRX
Profiles in thermoplastics rubber TPeRX 30 22 Rubber Technology Edge protectors Available on Stock Sidesight 60 38 38 Elastomer joint with adhesive Colour: yellow Packaging: 10 x 2 meters Reference: F1123
European Pharmacopoeia Solutions
European Pharmacopoeia Solutions European Pharmacopoeia Solutions Reagecon, as a specialist manufacturer of laboratory reagents has now introduced the range of Reagents and Standard solutions in Chapters
Atlas Minerals & Chemicals, Inc. CHEMESTER MORTAR. 5-42PI ( ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-42PI (6-03 2 ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) CHEMESTER MORTAR DESCRIPTION CHEMESTER MORTAR is an epoxy novolac based vinyl ester resin mortar
LIGHTBLOCKS BOARD. stress cracking. chemical
e info@ chemical stress cracking LIGHTBLOCKS BOARD Contents This brochure provides a summary of the chemical behavior of our semifinished product groups by listing the chemical substances ed on these materials
KYNAR (PVDF) Chemical Compatibility & Chemical Resistance Chart
KYNAR (PVDF) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
A flexible duct connector is an airtight, flexible joint consisting of a fabric that is secured to sheet metal on both sides.
TechTips VOLUME 4 Flexible Duct Connector Tech Tip Figure 1 What are flexible duct connectors? A flexible duct connector is an airtight, flexible joint consisting of a fabric that is secured to sheet metal
Standards of Ethanol in Water. Analytical Volumetric Solutions
Standards of Ethanol in Water These standards are intented for use as reference solutions for alcohol content measuring instruments. They are prepared using organic-free water, and the certified concentrations
T/C, Noble, Straight Ceramic
Introduction T/C, Noble, Straight Ceramic Thermocouple, Noble Metal Ceramic Tube, Straight Applications Ordering Information Elements are constructed of high quality material using modern techniques to
MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON
MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON 2639-95 C 6/18/14 2 1/2"-12" R/S VALVE OS&Y EXPLODED VIEW ITEM NO. DESCRIPTION Material QTY. 1 Follower Gland Gray Iron
5. SHEATH MATERIALS, THERMOWELLS, FITTINGS AND TERMINATIONS
. SHEATH MATERIALS, THERMOWELLS, FITTINGS AND TERMINATIONS Temperature sensor elements for laboratory and industrial use, whether Pt100 or thermocouple will normally be protected by some form of sheath
Product Shelf Life/Expiration Date Policy
Acetic Acid 99.7% Glass and Polyethylene 24 Acetic Acid Dilutions Glass and Polyethylene 24 Acetone >99.5% Polyethylene 36 Acetone >99.5% Metal 12 Acetone 85% / IPA 15% Blend Polyethylene 18 Ammonium Chloride
Anti-Corrosive Heat Resistant Chain
ANTI-CORROSIVE / HEAT RESISTANT CHAIN Anti-Corrosive Heat Resistant Chain ULTRA WP CHAIN ULTRA WP chain resists corrosion when exposed to harsh outdoor environments, including seawater. The exclusive ULTRA
CARBON AND GRAPHITE PRODUCTS
ARBON AND GRAPHITE PRODUTS FOR HEMIAL RESISTANT LINING GRAPHITE OVA GMBH GRÜNTHAL 1 6 D-90552 RÖTHENBAH/PEGNITZ Tel.: +49 911 57 08 0 Fax: +49 911 57 08 211 E-mail: specials@graphitecova.com Web: www.graphitecova.com
Duriron and Durichlor 51M
Duriron and Durichlor 51M D/D 51M Bulletin A/2l High Silicon Iron Introduction History Chemical Composition High silicon iron has been serving the chemical process and related industries for over 85 years.
ICSE-Science 2 (Chemistry) 2004
ICSE-Science 2 (Chemistry) 2004 Answers to this Paper must be written on the paper provided separately. You will not be allowed to write during the first 15 minutes. This time is to be spent in reading
Reagents and standards for the Pharmaceutical Industry
Reagents and standards for the Pharmaceutical Industry European Pharmacopoeia (Ph. Eur.) 8th Edition Reagents as outlined in Chapter 4 (4.1.1) of Ph. Eur. Product No. Description Pack Size 1000401 Acetic
Plastic pipe clamp CLIC TOP 8 64
Plastic pipe clamp CLIC TOP 8 64 Technical data sheet 12/2014 1 1. Product description The most efficient mounting system for pipes, cables and many other applications. Diameter dimensions ranging from
European Pharmacopoeia
European Pharmacopoeia Pharma Standards John Barron Page 1 of 6 Reagents and standards for the Pharmaceutical Industry European Pharmacopoeia (Ph. Eur.) 8th Edition Reagents as outlined in Chapter 4 (4.1.1)
HAIR INTERCEPTORS GENERAL INFORMATION PICTORIAL INDEX HAIR INTERCEPTORS. OPTIONS and VARIATIONS TYPICAL INSTALLATIONS
HAIR INTRCPTORS GNRAL INFORMATION Zurn has solids interceptors which are specifically designed for hair (Z1175 and Z1176). PICTORIAL INDX HAIR INTRCPTORS Z1175 Hair Interceptor Z1176 Hair Interceptor OPTIONS
Volumetrie Analysis o( Metal Finishing Solutions
Volumetrie Analysis o( Metal Finishing Solutions AUTHOR: Andrew K. McFadyen B.Sc, C.Chem., FRSC To My Wife..^tSNV ASM INTERNATIONAL Materials Park, Ohio, U.S.A. FINISHING PUBLICATIONS LTD, Stevenage, Hertfordshire,
(Cell) (Fax)
(Cell) +27 79 620 9375 (Fax) +27 86 605 1503 info@mylab.co.za www.mylab.co.za Mylab Grade 10 to 12 Kit, Apparatus and Chemical content list. Item Quantity/Box Apron 1 Back Plate 1 Bamboo Sticks 3 Base
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Resco s ChemLab is the ultimate laboratory benchtop for high chemical use. The Electro Beam Cured (EBC) surface, gives it an extra stain resistance and high hygiene, making it the
21. sodium nitrite 31. potassium carbonate. 23. aluminum hydroxide 33. nickel (II) carbonate. 24. ammonium hydroxide 34.
N.E. Packet 1 Nomenclature WS 1 (Ionic Compounds) Name: Date: Per: Write the name for each of the following compounds. 1. CaCO 3 11. BaSO 4 2. FeO 12. Zn(NO 3 ) 2 3. K 2 SO 3 13. CuSO 4 4. AgCl 14. AlCl
DELIVER TO END USER AFTER INSTALLATION IS COMPLETED
PRODOME TM SKYLIGHT DELIVER TO END USER AFTER INSTALLATION IS COMPLETED RECOMMENDED TOOLS PARTS LIST 1. #12 x 1-1/2 Hex Washer Head Screw (Other sizes and types available) 2. (Appearance may vary depending
SURFACE VEIL CONTINUOUS GLASS ROVING. Color
Pultruded Fiberglass Grating Pultrusion technology is a manufacturing process which produces uniform cross-sectionally shaped glassfiber reinforced polymer composite profiles. These profiles are designed
DRUM PUMP CHEMICAL RESISTANCE GUIDE AND APPLICATION WORKSHEET
DUM PUMP CHEMICAL ESISTANCE GUIDE AND APPLICATION WOKSHEET TECHNICAL BULLETIN TPS-10709 The information contained in this Drum Pump Chemical esistance Guide is to be used only as a general guide for proper
Stainless Steel Drains
Stainless Steel Drains Specification Drainage Engineering Guide www.zurn.com HEALTH CARE FOOD SERVICE POWER GENERATING STATIONS Closure Plugs Floor drain closure plugs are required to be installed in the
CHEMICAL RESISTANCE GUIDE
CHEMICAL RESISTANCE GUIDE INTRODUCTION This guide is offered as a general aid in selecting the appropriate materials used for a broad spectrum of aggressive chemicals routinely handled by the products
P R A C T I C E I O N S Q U I Z - 1
P R A C T I C E I O N S Q U I Z - 1 Hypobromite Hydrogen Dichromate Iodate Thiocyanate Nitrate Permanganate Perbromate Bromate Sodium Nitrite Bicarbonate, Ammonium Hypoiodite Chromate Bisulfate Nickel
Q1. From the following list of substances, choose the substances which meet the description given in parts (i) to (v) below :
Questions:- Q1. From the following list of substances, choose the substances which meet the description given in parts (i) to (v) below : Ammonium chloride, ammonium nitrate, chlorine, dilute hydrochloric
3M Scotchkote Fusion-Bonded Epoxy Coating 134
3M Scotchkote Fusion-Bonded Epoxy Coating 134 Data Sheet and Application Guide February 2016 Handling and Safety Precautions: Read all Health Hazard, Precautionary and First Aid, Material Safety Data Sheet,
Heat and corrosion resistant alloys for chemical processing systems
Heat and corrosion resistant alloys for chemical processing systems Regular advancement in metallurgical and fabrication procedures had led to the development of broad range of nickel alloys and their
TECHNICAL INFORMATION
Applicable Standards 900 Series AASHTO H-20 or HS-20 AASHTO M306-07 modified 9"x 9" load plate replaced with 18" long x 4" diameter steel rod ASTM A536 Class 65-45-12 CALTRANS Section 10-1.35, "Grated
DKE / DZE / DBAE Conductive Leakage detectors of the LeakConductive range. with electrode and relay
DKE / DZE / DBAE Conductive Leakage detectors of the LeakConductive range with electrode and relay E-1 31-1-0 Model overview 31-1-1 Page The conductive measuring principle 31-1-3 Examples of electrically
Z-Core Piping Systems Competitive Materials Installed Cost Comparison
Z-Core Piping Systems Competitive Materials Installed Cost Comparison www.fgspipe.com fgspipe@nov.com INTRODUCTION Selecting the right pipe for your corrosive service can result in a system that outlasts