3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series

Transcription

1 Pak Wall Header Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing header to board RoHS* compliant Optional polarizing posts High temperature insulator suitable for no lead soldering operations Suitable for reflow soldering using paste in hole techniques Date Modified: January 7, 2005 Sheet 1 of 4 Physical Insulator Material: Glass Filled Polyester (PCT) Flammability: UL 94V-0 Color: lack Contact Material: Copper lloy Plating Underplating: 100 µ [ 2.54 µm ] Nickel - Overall Wiping rea: 30 µ [ 0.76 µm ] Gold Solder Tails: 200 µ [ 5.08 µm ] Matte Tin Terminal Finish Indicator: e3 (per JESD97) Marking: Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: Insulation Resistance: Withstanding Voltage: 1 > Ω at 500 Vdc 1000 Vrms at Sea Level Environmental Temperature Rating: -55 C to +105 C Process Rating: Maximum 260 C, single pass, (profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 *RoHS = Directive 2002/95/EC, Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.

2 Pak Wall Header Latch/Ejector, Straight and Right ngle 3000 Series -X202 Header with Short Ejector/Latch for Sockets without Strain Relief -X302 Header with Long Ejector/Latch for Sockets with Strain Relief.08 [2.0].424 ±.010 [ ].97 Ref [24.6].08 [2.0].573 ±.010 [ ] 1.07 Ref [27.2].37 Ref [9.4].46 Ref [11.7].025 ±.002 Sq Typ [ 0.64 ] 2X ø [6.1].020 [0.51] D.28 [7.1].30 [7.6].25 [6.4].112 ±.010 [2.84].12 [3.0].34 [8.3] Section - (Straight).0245 Typ Orientation Triangle Notch (See Table 1 & Note1) Notch (See Table 1).025 ±.002 Sq Typ [ 0.64 ].21 [5.3].16 [4.1] Notch C (See Table 1 & Note 1).0245 Typ.24 [6.1].30 [7.6].68 [17.3].35 [8.9].049 Ref [1.24].112 ±.010 [2.84] Section - (Right ngle).020 [0.51] 2X ø.100 C.197 [5.00].20 [5.1] Sheet 2 of 4

3 Pak Wall Header Latch/Ejector, Straight and Right ngle 3000 Series Pin Quantity Part Number Table 1 Dimensions Polarization Notches Provided C D [32.1] [28.07].865 [21.97].71 [18.0] C [37.2] [33.15] [27.05].91 [23.1] C [39.7] [35.69] [29.59] 1.01 [25.6] C [44.8] [40.77] [34.67] 1.21 [30.7] C [49.8] [45.85] [39.75] 1.41 [35.8] C [52.4] [48.39] [42.29] 1.51 [38.3] C [57.4] [53.47] [47.37] ] C [62.6] [58.55] [52.45] 1.91 [48.5] C [70.2] [66.17] [60.07] 2.21 [56.1] C [82.9] [78.87] [72.77] 2.71 [68.8] C [95.6] [91.57] [85.47] 3.21 [81.5] C [100.7] [96.65] [90.55] 3.41 [86.6] C ø.106 [2.69].300 [7.62] Side to Side Stackability or ø.116 [2.95].035 [0.89] Dia.41 [10.4] Max to Edge of PC for Daisy Chain Inch [mm] Tolerance Unless Noted Inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference only ø.106 [2.69] or ø.116 [2.95].035 [0.89] Dia "Y".060 [1.52].352 [8.94].029 [0.74].232 [5.89] C Recommended Mounting Hole Pattern (Straight) Recommended Mounting Hole Pattern (Right ngle) Notes: 1. Notches & C will accomodate Polarizing Keys ( Part #N3518). 2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw ( Part # ) and.116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut ( Part # ) with.106 [2.69] dia mounting hole may be used [2.84] tail length suitable for.062 [1.57] thick pc board. 4. Contact tails.0245 [0.622] crowned wire with.0075 [0.191] corner radii &.028 [.072] diagonal. 5. Contact your sales representative for custom requirements. Ordering Information NXXXX-XX02R Part Number (See Table 1) Pin Configuration 5 = Right ngle 6 = Straight Latch/Ejector System 2 = Short Roll Pin Latch/Ejectors ( Part # N3505-2) 3 = Long Roll Pin Latch/Ejectors ( Part # N3505-3) Sheet 3 of 4

4 Pak Wall Header Latch/Ejector, Straight and Right ngle, ccessories 3000 Series Mounting Hardware Polarizing Post (Installed from bottom of board) (Right angle product only).321 [8.15] Part Number Material Color LCP lack.31 [7.9].50 [12.7].100 Dia Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude.115. Panhead Thread Cutting Screw: #4-24 X 5/16 Type: US Std T, Federal G & 6 Material - Stainless Steel Hex Head olt, Nut and Washer olt - #2-56 X 1/2 Polarizing Keys Part Number Material Color Dim N3518 Nylon lack 0.02 reakaway Tab.34 Ref [8.6].09 [2.3].15 [3.8] Note: #2216 / Scotchweld can be used to adhere keys. Sheet 4 of 4

5 Important Notice ll statements, technical information, and recommendations related to s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. efore using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. ny statements related to the product which are not contained in s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. MKES NO OTHER WRRNTIES INCLUDING, UT NOT LIMITED TO, NY IMPLIED WRRNTY OF MERCHNTILITY OR FITNESS FOR PRTICULR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at s option, to replace or repair the product or refund the purchase price of the product. Except where prohibited by law, will not be liable for any indirect, special, incidental or consequential loss or damage arising from this product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place lvd. ustin, TX Minimum 10% Post-consumer Fiber Printed in US. 2005