Overview. Benefits. Applications

Transcription

1 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Overview The KEET standard IL case hermetically sealed T140 eries (Extended apacitance ange) is compact, ruggedly built and designed for miniaturized circuitry. The capacitors are especially well-suited for coupling, bypass filtering and timing circuits. The T140 eries exhibits excellent stability, low leakage current, dissipation factor, and E/impedance over a wide temperature and frequency range. Available in standard EIA capacitance values from 0.82 µf to 1,200 µf in ±20% and ±10% tolerances and working voltages of 6 V to 60 V. enefits Taped and reeled per EIA pecification 296 arking per IL T 1285 Qualified to IL F (23 tyle) Failure rate options: raded,, and Exponential,,, and * apacitance values of 0.82 μf to 1200 μf Tolerances of ±10% and ±20% rating of 6 V 60 V Operating temperature range of 55 to +125 ase sizes: A,,, *Failure rates apply to military products only lick image above for interactive 3 content Open F in Adobe eader for full functionality Applications Typical applications include coupling, bypass, filtering and timing circuits in miniaturized circuitry. One world. One KEET KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 1

2 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Ordering Information T140 T 140 A 105 K 050 A 7200 apacitor lass T = Tantalum eries Hermetically sealed axial capacitor ase ize A apacitance ode (pf) First two digits represent significant figures. Third digit specifies number of zeros. apacitance Tolerance K = ±10% = ±20% (V) 006 = = = = = = = = = 60 Failure ate/ilitary roduct Only A = N/A Termination Finish = tandard (n/b) T = 100% Tin pecification All capacitors are sleeved unless specified = Without sleeve 7200 = Tape & eel 7293 & 7443 = Ammo 4250 = 10 cycles, 25 after Weibull 4251 = 10 cycles, 55 and 85 after Weibull 4252 = 10 cycles, 55 and 85 before Weibull Ordering Information T242 (23 tyle) T 242 A 105 K 050 A apacitor lass T = Tantalum eries T242 = 23 ase ize A apacitance ode (pf) First two digits represent significant figures. Third digit specifies number of zeros. apacitance Tolerance K = ±10% = ±20% (V) 006 = = = = = = = = = 60 Failure ate/ilitary roduct Only raded: = 0.1%/k hours = 0.01%/k hours = 0.001%/k hours = 1.0%/k hours Exponential: = 1%/k hours = 0.1%/k hours = 0.01%/k hours = 0.001%/k hours Termination Finish = tandard pecification All capacitors are sleeved unless specified = Without sleeve 7200 = Tape & eel 7293 & 7443= Ammo 4250 = 10 cycles, 25 after Weibull 4251 = 10 cycles, 55 and 85 after Weibull 4252 = 10 cycles, 55 and 85 before Weibull Ordering Information IL F / A apacitor lass lash ash urge Option ilitary specification number pecification sheet number Failure rate level A = = = lank = No surge Orders should be entered by the military specification number, including the dash number and surge option letter (A, or ). KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 2

3 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) erformance haracteristics Item Operating Temperature 55 to 125 erformance haracteristics apacitance ange ,200 μf at /25 apacitance Tolerance K Tolerance (10%), Tolerance (20%) ange F ( at 25 ) E and Impedance (100 khz at 25 ) urrent Failure ate (IL 39003, 13 capacitors only) 6 60 V efer to art Electrical pecification Table efer to art Electrical pecification Table (for reference only) efer to art Electrical pecification Table (at rated voltage up to +85 and 2/3 of rated voltage applied at 125 ) Approved failure rate: (0.001%/k hours) Exponential, (0.001%/k hours) raded imensions Inches (illimeters) IE VIEW EN VIEW 1.50±0.250 (38.10±6.35) 1.50±0.250 (38.10±6.35) + L ase ize A Uninsulated ±0.005 ±(0.13) (3.18) (4.45) (7.09) (8.66) L ±0.031 ±(0.79) (6.35) (11.13) (16.51) (19.05) Insulated ±0.010 ±(0.25) (3.43) (4.70) (7.34) (8.92) L ±0.031 ±(0.79) (7.26) (12.04) (17.42) (19.96) ±0.002 ±(0.05) (0.51) (0.51) (0.64) (0.64) (10.72) (15.49) (20.88) (23.42) KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 3

4 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Table 1 atings & art eference ap ase ize ode KEET art F % at 25 IL F (23) apacitors ash eference Failure ate Level (%/1,000 Hours) KEET Equivalent IL F 39003/3F IL F 39003/3F ilitary Exponential raded (V) 85 µf (ee below for µa at 25 ax/5 inutes art A T140A825006A(3) A T140A106K006A(3) T242A106K006(2) A T140A106006A(3) T242A106006(2) A T140A126K006A(3) T242A126K006(2) A T140A126006A(3) T A(3) T A(3) T140107K006A(3) T242107K006(2) T A(3) T (2) T A(3) T A(3) T140337K006A(3) T242337K006(2) T A(3) T (2) T140397K006A(3) T242397K006(2) T A(3) T140477K006A(3) T242477K006(2) T A(3) T (2) T A(3) T140687K006A(3) T242687K006(2) T A(3) T (2) T140827K006A(3) T242827K006(2) T A(3) T140108K006A(3) T242108K006(2) T A(3) T (2) T A(3) A T140A565010A(3) A T140A685K010A(3) T242A685K010(2) A T140A685010A(3) T242A685010(2) A T140A825K010A(3) T242A825K010(2) A T140A825010A(3) T140476K010A(3) T242476K010(2) T A(3) T (2) T140566K010A(3) T242566K010(2) T A(3) T140686K010A(3) T242686K010(2) T A(3) T (2) T140826K010A(3) T242826K010(2) T A(3) T A(3) T A(3) T140227K010A(3) T242227K010(2) T A(3) T (2) T140277K010A(3) T242277K010(2) T A(3) T A(3) T140397K010A(3) T242397K010(2) T A(3) T140477K010A(3) T242477K010(2) T A(3) T (2) (V) 85 µf ap ase ize ode (ee below for KEET art µa at 25 ax/5 inutes F % at 25 To complete KEET part number, insert for ±20% or K for ±10%. esignates capacitance tolerance. (2) To complete KEET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEET T140 art, insert Lead aterial designator: tandard or T 100% atte Tin. esignates termination finish. IL F (23) apacitors art KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 4

5 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Table 1 atings & art eference cont'd ap (V) 85 µf ase ize ode KEET art (ee below for µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors ash eference Failure ate Level (%/1,000 Hours) IL F 39003/3F Exponential IL F 39003/3F raded KEET Equivalent ilitary art T140567K010A(3) T242567K010(2) T A(3) A T140A395015A(3) A T140A475K015A(3) T242A475K015(2) A T140A475015A(3) T242A475015(2) A T140A565K015A(3) T242A565K015(2) A T140A565015A(3) T A(3) T140336K015A(3) T242336K015(2) T A(3) T (2) T140396K015A(3) T242396K015(2) T A(3) T A(3) T A(3) T A(3) T140157K015A(3) T242157K015(2) T A(3) T (2) T140187K015A(3) T242187K015(2) T A(3) T140227K015A(3) T242227K015(2) T A(3) T (2) T140277K015A(3) T242277K015(2) T A(3) T140337K015A(3) T242337K015(2) T A(3) T (2) A T140A275K020A(3) T242A275K020(2) A T140A275020A(3) A T140A335K020A(3) T242A335K020(2) A T140A335020A(3) T242A335020(2) A T140A395K020A(3) T242A395K020(2) A T140A395020A(3) T140186K020A(3) T242186K020(2) T A(3) T140226K020A(3) T242226K020(2) T A(3) T (2) T140276K020A(3) T242276K020(2) T A(3) T140566K020A(3) T242566K020(2) T A(3) T140686K020A(3) T242686K020(2) T A(3) T (2) T140826K020A(3) T242826K020(2) T A(3) T140107K020A(3) T242107K020(2) T A(3) T (2) T140127K020A(3) T242127K020(2) T A(3) T140157K020A(3) T242157K020(2) T A(3) T (2) (V) 85 µf ap ase ize ode (ee below for KEET art µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors To complete KEET part number, insert for ±20% or K for ±10%. esignates capacitance tolerance. (2) To complete KEET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEET T140 art, insert Lead aterial designator: tandard or T 100% atte Tin. esignates termination finish. art KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 5

6 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Table 1 atings & art eference cont'd ap (V) 85 µf ase ize ode KEET art (ee below for µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors ash eference Failure ate Level (%/1,000 Hours) IL F 39003/3F Exponential IL F 39003/3F raded KEET Equivalent ilitary art T140187K020A(3) T242187K020(2) T A(3) A T140A125030A(3) A T140A155030A(3) A T140A185030A(3) A T140A225030A(3) A T140A275030A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) A T140A125035A(3) A T140A155035A(3) A T140A185K035A(3) T242A185K035(2) A T140A185035A(3) T140825K035A(3) T242825K035(2) T A(3) T140106K035A(3) T242106K035(2) T A(3) T (2) T A(3) T140336K035A(3) T242336K035(2) T A(3) T (2) T140396K035A(3) T242396K035(2) T A(3) T140476K035A(3) T242476K035(2) T A(3) T (2) T140566K035A(3) T242566K035(2) T A(3) T140686K035A(3) T242686K035(2) T A(3) T (2) T A(3) T A(3) A T140A125K050A(3) T242A125K050(2) A T140A125050A(3) A T140A155K050A(3) T242A155K050(2) A T140A155050A(3) T242A155050(2) T140565K050A(3) T242565K050(2) T A(3) T140685K050A(3) T242685K050(2) T A(3) T (2) T140226K050A(3) T242226K050(2) T A(3) T (2) T140276K050A(3) T242276K050(2) (V) 85 µf ap ase ize ode (ee below for KEET art µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors To complete KEET part number, insert for ±20% or K for ±10%. esignates capacitance tolerance. (2) To complete KEET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEET T140 art, insert Lead aterial designator: tandard or T 100% atte Tin. esignates termination finish. art KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 6

7 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Table 1 atings & art eference cont'd ap (V) 85 µf ase ize ode KEET art (ee below for µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors ash eference Failure ate Level (%/1,000 Hours) IL F 39003/3F Exponential IL F 39003/3F raded KEET Equivalent ilitary art T A(3) T140336K050A(3) * * T242336K050(2) T A(3) * * T (2) T140396K050A(3) * * T242396K050(2) T A(3) T A(3) A T140A824060A(3) A T140A105060A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) T A(3) (V) 85 µf ap ase ize ode (ee below for KEET art µa at 25 ax/5 inutes F % at 25 IL F (23) apacitors To complete KEET part number, insert for ±20% or K for ± 10%. esignates capacitance tolerance. (2) To complete KEET part number (T242), insert failure rate code from Ordering Information table. (3) To complete KEET T140 art, insert Lead aterial designator: tandard or T 100% atte Tin. esignates termination finish. art KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 7

8 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) ipple urrent/ipple ermissible A ripple voltage is related to the E of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined empirically and are listed below. Temperature ompensation ultipliers for ower issipation T 25 T 85 T T= Environmental Temperature ermissible A ripple current can be determined by the following: ase ize ower issipation ( max) T2XX A ower issipation: 25 Ambient I(max) = Z max/ max = maximum watts = E at specified frequency (ohms) I = rms ripple current (amperes) Z = capacitor impedance in ohms at the specified frequency Optimum older Wave rofile egrees º Flux Zone Entrance to older achine Entrance to older Wave reheat Zone ottom ide Temperature ange 80º to 120º older Wave eak Temperature 260º Top ide Nominal Time (inutes) Exit from older Wave (Time in Wave 2 to 4 econds) 150º Hot Air ebridging Free Air ool Exit from older achine Entrance to In-Line leaner Exit from In-Line leaner (time in cleaner may be less) Immersion in leaning Vapor KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 8

9 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) everse Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature ecentage of ounting All encased capacitors will pass the esistance to oldering Heat Test of IL T 202, ethod 210, ondition. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. ore severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors.onstruction onstruction Wire Lead (+) (100% n / nb) Hermetic eal ystem (lass eal) Hermetic eal ystem (ing) Anode Tube rass an Tantalum ellet (ee etail for Layers) Tantalum Wire Wire Lead ( ) (100% n / nb) Insulation leeve arbon (Third Layer) Ta 2 O 5 ielectric (First Layer) Wire Lead ( ) (100% n / nb) Wire Lead (+) (100% n / nb) Anode Tube Hermetic eal ystem (lass eal and ing) older rass an Tantalum Wire ilver aint (Fourth Layer) no 2 (econd Layer) Tantalum etailed ross ection older older KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/2018 9

10 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) apacitor arking T140 T242 A ase KEET I apacitance Tolerance ilitary pecification olarity ark (V) +K 10% 56 µf 10 V 1330 pecification heet 3 igit ate ode K J AAAA K = KEET and J = JAN ilitary ash 4 igit ate ode apacitance ( Indicates ecimal) Lot ymbol olarity ark ate ode 3 igit 4 igit Year Week 5 = = = = = = = = = = = 1 st week of the year to 52 = 52 nd week of the year T242 ase pecification heet ource ode ilitary pecification J AAAA + 3 igit ate ode Lot ymbol ilitary ash olarity ark T242 and ase pecification heet, ilitary ash ource ode 3 igit ate ode ilitary pecification and J = JAN J µF + 10% 6V AAAA K Lot ymbol K = KEET apacitance Value and olarity apacitance Tolerance and KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/

11 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) torage Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature reels may soften or warp and tape peel force may increase. KEET recommends that maximum storage temperature not exceed 40 and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & eel ackaging Information KEET offers standard reeling of olid Tantalum apacitors for automatic insertion or lead forming machines per EIA pecification 296E. Table 2 ackaging Quantity ase ize tandard ulk Quantity tandard eel Quantity eel -pec Ammo ack Quantity Ammo ack -pec A 150/ox 3, , /ox 2, ,000 lass I 20/Tray /Tray lass II 7443 lass III KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/

12 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) Figure 2 Figure 3 12" (30.48cm) * 0.059" to 0.315" reater Than omponent Length White (+) (Anode) lue ( ) (athode) Hub 0.047" (1.20) 0.655" ±0.010 Hole (15.9 ±0.25) 3 1 / 4 " (82.6) 1 /8 " (3.18) ee Table 3 "" * ee Table 3 "A" 0.250" Nominal (6.35) Table 3 Tape imensions omponent ody iameter omponent itch "A" Inside Tape pacing "" ±1.5 mm (0.059") 0.020" or (±0.5 mm) I II III 0" (0 mm) to 0.197" (5 mm) 0.200" or (5 mm) 2.062" 2.500" 2.874" 0.197" (5.01 mm) to 0.394" (10 mm) or (10 mm) (52.4 mm) (63.5 mm) (73 mm) apacitors are reeled so that positive leads are oriented as shown in Figure 3. Kraft paper (50lb. test minimum) is inserted between the layers of capacitors wound on reels for component pitch 0.200" sizes and corrugated paper (70 lb. test minimum), single faced is inserted for component pitch 0.400" sizes. apacitor lead length may extend only a maximum of 0.031" (0.8 mm) beyond the tape s edges. apacitors are centered in a row between the two tapes and will deviate only ±0.031" (0.79 mm) from the row center. Figures 1 and 2 show the KEET standard chipboard tape reel. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled capacitors. Universal splicing clips are used to connect the tape. KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/

13 Tantalum Through-Hole apacitors Hermetically ealed T140 eries Axial IL F olar Type and T242 (23 tyle) KEET Electronics orporation ales Offices For a complete list of our global sales offi ces, please visit isclaimer All product specifi cations, statements, information and data (collectively, the Information ) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. tatements of suitability for certain applications are based on KEET Electronics orporation s ( KEET ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEET specifi cally disclaims any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEET with reference to the use of KEET s products is given gratis, and KEET assumes no obligation or liability for the advice given or results obtained. Although KEET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEET is a registered trademark of KEET Electronics orporation. KEET Electronics orporation.o. ox 5928 reenville, T2034_T140_AXIAL_T242 1/15/