ANNEX. to the. Proposal for a Council Decision

Transcription

1 EUROPEAN COMMISSION Brussels, COM(2016) 174 final ANNEX 6 PART 4/5 ANNEX to the Proposal for a Council Decision on the conclusion of the Protocol of Accession to the Trade Agreement between the European Union and its Member States, of the one part, and Colombia and Peru, of the other part, to take account of the Accession of Ecuador EN EN

2 ANNEX V (Part 4) TARIFF ELIMINATION SCHEDULE OF ECUADOR FOR GOODS ORIGINATING IN THE EUROPEAN UNION NANDINA Building bricks Other Roofing tiles Other Ceramic pipes, conduits, guttering and pipe fittings Tiles, cubes and similar articles, whether or not square or rectangular, the largest surface area of which is capable of being enclosed in a square the side of which is less than 7 cm Other EN 2 EN

3 Tiles, cubes and similar articles, whether or not square or rectangular, the largest surface area of which is capable of being enclosed in a square the side of which is less than 7 cm Other Of porcelain or china ARTICLES HAVING A HARDNESS EQUIVALENT TO 9 OR MORE ON THE MOHS SCALE Other Other Of porcelain or china Other Tableware and kitchenware EN 3 EN

4 Other Ceramic tableware, kitchenware, other household articles and toilet articles, other than of porcelain or china Of porcelain or china Other Of porcelain or china Other Waste and scrap GLASS IN THE MASS BALLS EN 4 EN

5 RODS OF FUSED QUARTZ OR OTHER FUSED SILICA Of other glass having a linear coefficient of expansion not exceeding per Kelvin within a temperature range of 0 C to 300 C Other Plain Striated, corrugated, stamped or the like Plain Striated, corrugated, stamped or the like Wired sheets Profiles EN 5 EN

6 Glass, coloured throughout the mass (body tinted), opacified, flashed or having an 1 absorbent, reflecting or non-reflecting layer Other glass Non-wired glass, having an absorbent, reflecting or non-reflecting layer Floated Other Other Of a thickness not exceeding 6 mm Other Wired glass EN 6 EN

7 Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels Other Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels Other Multiple-walled insulating units of glass Rear-view mirrors for vehicles Unframed Framed Ampoules EN 7 EN

8 Stoppers, lids and other closures Of a capacity exceeding 1 litre Of a capacity exceeding 0.33 litres but not exceeding 1 litre Of a capacity exceeding 0.15 litres but not exceeding 0.33 litres Of a capacity not exceeding 0.15 litres For electric lighting For cathode ray tubes Other Of glass ceramics Of lead crystal EN 8 EN

9 Other Of lead crystal Other Of lead crystal Of glass having a linear coefficient of expansion not exceeding per Kelvin within a temperature range of 0 C to 300 C Other Of lead crystal Other Signalling glassware and optical elements of glass (other than those of heading 7015), not optically worked Glasses for corrective spectacles EN 9 EN

10 Other Glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes Leaded lights and the like (stained glass, whether or not of colourless glass) Multicellular or foam glass in blocks, panels, plates, shells or similar forms Other Of fused quartz or other fused silica Of other glass having a linear coefficient of expansion not exceeding per Kelvin within a temperature range of 0 C to 300 C Other EN 10 EN

11 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares Glass microspheres not exceeding 1 mm in diameter Other Chopped strands, of a length of not more than 50 mm Rovings Other Mats Thin sheets (voiles) Other Woven fabrics of rovings EN 11 EN

12 Of a width not exceeding 30 cm Of a width exceeding 30 cm, plain weave, weighing less than 250 g/m², of filaments measuring per single yarn not more than 136 tex Other Glass wool in bulk or in flakes Other Glass inners for vacuum flasks or for other vacuum vessels Other Natural pearls Unworked Worked EN 12 EN

13 Unsorted Unworked or simply sawn, cleaved or bruted Other Unworked or simply sawn, cleaved or bruted Other Emeralds Other Rubies and sapphires Emeralds Other 1 EN 13 EN

14 Piezoelectric quartz Other, unworked or simply sawn or roughly shaped Other Of diamonds Other Powder Not alloyed Alloyed Semi-manufactured Base metals clad with silver, not further worked than semi-manufactured EN 14 EN

15 Powder Other unwrought forms Other semi-manufactured forms Monetary Base metals or silver, clad with gold, not further worked than semi-manufactured Unwrought or in powder form Other Unwrought or in powder form Other Unwrought or in powder form Other EN 15 EN

16 Unwrought or in powder form Other Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured Ash containing precious metal or preciousmetal compounds Of gold, including metal clad with gold but excluding sweepings containing other precious metals Of platinum, including metal clad with platinum but excluding sweepings containing other precious metals Other Of silver, whether or not plated or clad with other precious metal Of other precious metal, whether or not plated or clad with precious metal EN 16 EN

17 Of base metal clad with precious metal OF GRADE Other Of other precious metal, whether or not plated or clad with precious metal Of base metal clad with precious metal Catalysts in the form of wire cloth or grill, of platinum Other Of natural or cultured pearls Of precious or semi-precious stones (natural, synthetic or reconstructed) Cuff links and studs Other EN 17 EN

18 Other Coin (other than gold coin), not being legal tender Other Non-alloy pig iron containing by weight 0.5 % or less of phosphorus Non-alloy pig iron containing by weight more than 0.5 % of phosphorus Alloy pig iron; Spiegeleisen Containing by weight more than 2 % of carbon Other Containing by weight more than 55 % of silicon Other 25 7 EN 18 EN

19 Ferro-silico-manganese Containing by weight more than 4 % of carbon Other Ferro-silico-chromium Ferro-nickel Ferro-molybdenum Ferro-tungsten and ferro-silico-tungsten Ferro-titanium and ferro-silico-titanium Ferro-vanadium Ferro-niobium EN 19 EN

20 Other Ferrous products obtained by direct reduction of iron ore Other Waste and scrap, of cast iron or steel Of stainless steel Other Waste and scrap, of tinned iron or steel Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Other Remelting scrap ingots EN 20 EN

21 Granules Of alloy steel Other Ingots Other Of rectangular or square cross-section, the width measuring less than twice the thickness Other, of rectangular cross-section Other Containing by weight 0.25 % or more of carbon Of a thickness exceeding 10 mm EN 21 EN

22 Of a thickness of 4.75 mm or more but not exceeding 10 mm Of a thickness of 3 mm or more but not exceeding 4.75 mm Of a thickness of less than 3 mm Of a thickness exceeding 10 mm Of a thickness of 4.75 mm or more but not exceeding 10 mm Of a thickness of 3 mm or more but not exceeding 4.75 mm Of a thickness of less than 3 mm Of a thickness exceeding 10 mm Containing by weight 0.12 % or more of carbon Other EN 22 EN

23 Containing by weight 0.12 % or more of carbon Other Containing by weight 0.12 % or more of carbon Of a thickness not exceeding 1.8 mm Other Of a thickness exceeding 10 mm Of a thickness of 4.75 mm or more but not exceeding 10 mm Of a thickness of 3 mm or more but not exceeding 4.75 mm Of a thickness of less than 3 mm EN 23 EN

24 Of a thickness exceeding 12.5 mm Of a thickness of more than 10 mm but not exceeding 12.5 mm Containing by weight 0.6 % or more of carbon Other Of a thickness of 3 mm or more but less than 4.75 mm Of a thickness of less than 3 mm Other Of a thickness of 3mm or more Of a thickness exceeding 1 mm but less than 3 mm EN 24 EN

25 Of a thickness of 0.5 mm or more but not exceeding 1 mm Of a thickness of less than 0.5 mm but not less than 0.25 mm Of a thickness of less than 0.25 mm Of a thickness of 3mm or more Of a thickness exceeding 1 mm but less than 3 mm Of a thickness of 0.5 mm or more but not exceeding 1 mm Of a thickness of less than 0.5 mm Other Of a thickness of 0.5 mm or more Of a thickness of less than 0.5 mm Plated or coated with lead, including terne-plate EN 25 EN

26 Electrolytically plated or coated with zinc Corrugated Other Plated or coated with chromium oxides or with chromium and chromium oxides Plated or coated with aluminium-zinc alloys Other Previously plated or coated with aluminiumzinc alloys Other Other Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief 10 5 EN 26 EN

27 Other, of a thickness of 4.75 mm or more Containing by weight 0.6 % or more of carbon Other Containing by weight less than 0.25 % of carbon Other Other Plated or coated with tin Electrolytically plated or coated with zinc Otherwise plated or coated with zinc Painted, varnished or coated with plastic 5 5 EN 27 EN

28 Otherwise plated or coated Clad Containing indentations, ribs, grooves or other deformations produced during the rolling process Other, of free-cutting steel Containing less than 0.12 % of chromium, nickel, copper and molybdenum taken together Other Other Forged Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling EN 28 EN

29 Of circular cross-section of a diameter not exceeding 100 mm Other Not exceeding 100 mm Other Of circular cross-section of a diameter not exceeding 100 mm Other Of circular cross-section of a diameter not exceeding 100 mm Other Of circular cross-section of a diameter not exceeding 100 mm EN 29 EN

30 Other Of circular cross-section of a diameter not exceeding 100 mm Other U, I or H sections, not further worked than hotrolled, hot-drawn or extruded, of a height of less than 80 mm L sections T sections U sections I sections H sections EN 30 EN

31 L or T sections, not further worked than hotrolled, hot-drawn or extruded, of a height of 80 mm or more Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded Obtained from flat-rolled products Other Cold-formed or cold-finished from flat-rolled products Other Not plated or coated, whether or not polished Plated or coated with zinc Coated with copper, with a diameter of less than 1 mm EN 31 EN

32 Other Other Ingots and other primary forms Of rectangular cross-section Other Of a thickness exceeding 10 mm Of a thickness of 4.75 mm or more but not exceeding 10 mm Of a thickness of 3 mm or more but less than 4.75 mm Of a thickness of less than 3 mm Of a thickness exceeding 10 mm 1 1 EN 32 EN

33 Of a thickness of 4.75 mm or more but not exceeding 10 mm Of a thickness of 3 mm or more but less than 4.75 mm Of a thickness of less than 3 mm Of a thickness of 4.75 mm or more Of a thickness of 3 mm or more but less than 4.75 mm Of a thickness exceeding 1 mm but less than 3 mm Of a thickness of 0.5 mm or more but not exceeding 1 mm Of a thickness of less than 0.5 mm Other EN 33 EN

34 Of a thickness of 4.75 mm or more Of a thickness of less than 4.75 mm Not further worked than cold-rolled (coldreduced) Other Bars and rods of stainless steel Of diameter not exceeding 65 mm Other Of cross-section not exceeding 65 mm Other Of circular cross-section of a diameter not exceeding 65 mm EN 34 EN

35 Other Of circular cross-section of a diameter not exceeding 65 mm Other Angles, shapes and sections Wire of stainless steel Ingots and other primary forms Other Grain-oriented Other Other, not further worked than hot-rolled, in coils EN 35 EN

36 Other, not further worked than hot-rolled, not in coils Of high-speed steel Other Of high-speed steel Other Of high-speed steel Other Of high-speed steel Other Grain-oriented EN 36 EN

37 Other Of high-speed steel Not further worked than hot-rolled Not further worked than cold-rolled (coldreduced) Other Of high-speed steel Of silico-manganese steel Other Bars and rods, of high-speed steel Of circular cross-section of a diameter not exceeding 100 mm EN 37 EN

38 Other Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded Of cross-section not exceeding 100 mm Other Of circular cross-section of a diameter not exceeding 100 mm Other Of circular cross-section of a diameter not exceeding 100 mm Other Angles, shapes and sections Hollow drill bars and rods EN 38 EN

39 Of silico-manganese steel Other Sheet piling Angles, shapes and sections Rails Switch blades, crossing frogs, point rods and other crossing pieces Fishplates and sole plates Sleepers (cross-ties) Other Tubes, pipes and hollow profiles, of cast iron EN 39 EN

40 Of stainless steel Other Drill pipe of stainless steel Other drill pipe Other, of stainless steel Other Cold-drawn or cold-rolled (cold-reduced) Other Cold-drawn or cold-rolled (cold-reduced) Other Cold-drawn or cold-rolled (cold-reduced) 10 5 EN 40 EN

41 Other Other Longitudinally submerged arc welded Other, longitudinally welded Other Casing of a kind used in drilling for oil or gas Longitudinally welded Other Other Welded, of stainless steel Other 10 5 EN 41 EN

42 Welded, of stainless steel Other Containing at least 0.6 % carbon by weight Double-walled tubes and pipes of steel, of an external diameter not exceeding 16 mm Single-walled tubes and pipes of steel, of an external diameter not exceeding 10 mm Other Other, welded, of circular cross-section, of stainless steel Other, welded, of circular cross-section, of other alloy steel Of square or rectangular cross-section Other EN 42 EN

43 Other Of non-malleable cast iron Other Flanges Threaded elbows, bends and sleeves Butt welding fittings Other Flanges Threaded elbows, bends and sleeves Butt welding fittings EN 43 EN

44 Other Bridges and bridge-sections Towers and lattice masts Doors, windows and their frames and thresholds for doors Equipment for scaffolding, shuttering, propping or pit-propping Plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures Sluice-gates Other 5 5 EN 44 EN

45 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment Of a capacity of 50 l or more Cans which are to be closed by soldering or crimping Double-walled containers for the transport and packing of semen Other Seamless Other For reinforcing pneumatic tyres 1 EN 45 EN

46 Other Other Barbed wire Other Endless bands for machinery, of stainless steel Other woven cloth, of stainless steel Endless bands for machinery, of metal cloth Other Grill, netting and fencing, welded at the intersection, of wire with a maximum crosssectional dimension of 3 mm or more and having a mesh size of 100 cm² or more EN 46 EN

47 Plated or coated with zinc Other Plated or coated with zinc Coated wth plastics Other Expanded sheet and strip metal Roller chain Other chain Parts Skid chain 15 5 EN 47 EN

48 Stud-link Other, welded link Other Other parts Anchors, grapnels and parts thereof, of iron or steel Nails, tacks, drawing pins, corrugated nails, staples and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper Coach screws Other wood screws Screw hooks and screw rings EN 48 EN

49 Self-tapping screws Expandable anchor bolts, for concrete Other Nuts Other Spring washers and other lock washers Other washers Rivets Cotters and cotter pins EN 49 EN

50 Other Safety pins Other pins Sewing, darning or embroidery needles Other Leaf-springs and leaves therefor For vehicle suspension systems Other Other For building in EN 50 EN

51 Table-top Other Other For liquid fuels For solid fuels Other For gas fuel or for both gas and other fuels For liquid fuels For solid fuels Other EN 51 EN

52 Gas furnace burners for tankless water heaters Other Of cast iron Other Other Iron or steel wool Pot scourers and scouring or polishing pads, gloves and the like Articles Parts Articles Parts EN 52 EN

53 Articles Parts Articles Parts Articles Parts Sinks and washbasins, of stainless steel Of cast iron, whether or not enamelled Other Other, including parts 5 5 EN 53 EN

54 Of non-malleable cast iron Grinding balls and similar articles for mills Other Grinding balls and similar articles for mills Other Articles of iron or steel wire Bars and rods of variable cross-section Other Copper mattes Cement copper (precipitated copper) EN 54 EN

55 Blister copper, unrefined Other, unrefined Copper anodes for electrolytic refining Cathodes and sections of cathodes Wire bars Billets Other Of copper-zinc base alloys (brass) Of copper-tin base alloys (bronze) Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) EN 55 EN

56 Other Copper waste and scrap Master alloys of copper Powders of non-lamellar structure Powders of lamellar structure; flakes Of refined copper Of copper-zinc base alloys (brass) Other Of which the maximum cross-sectional dimension exceeds 6 mm Other Of copper-zinc base alloys (brass) EN 56 EN

57 Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) Other In coils Other In coils Other In coils Other Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) Of other copper alloys EN 57 EN

58 Of refined copper Of copper alloys Of refined copper Of copper alloys Of refined copper Of copper-zinc base alloys (brass) Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) Other Of refined copper Of copper alloys 1 EN 58 EN

59 Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated Nails and tacks, drawing pins, staples and similar articles Washers (including spring washers) Other Screws; bolts and nuts Other Pot scourers and scouring or polishing pads, gloves and the like Non-electric cooking or heating apparatus, and parts thereof Other Sanitary ware and parts thereof 15 5 EN 59 EN

60 Chains and parts thereof Cast, moulded, stamped or forged, but not further worked Metal cloth (including endless bands) Copper springs Other Nickel mattes Nickel oxide sinters and other intermediate products of nickel metallurgy Nickel, not alloyed Nickel alloys Nickel waste and scrap EN 60 EN

61 Nickel powders and flakes Of nickel, not alloyed Of nickel alloys Of nickel, not alloyed Of nickel alloys Of nickel, not alloyed Of nickel alloys Of nickel, not alloyed Of nickel alloys Tube or pipe fittings EN 61 EN

62 Cloth, grill and netting, of nickel wire Anodes for nickel-plating, including by electrolysis Other Aluminium, not alloyed Aluminium alloys Aluminium waste and scrap Powders of non-lamellar structure Powders of lamellar structure; flakes Bars and rods Profiles, whether or not hollow Hollow profiles EN 62 EN

63 Bars and rods Other profiles Of which the maximum cross-sectional dimension exceeds 7 mm Other Of which the maximum cross-sectional dimension exceeds 7 mm Other Of aluminium, not alloyed Containing 0.5% or more by weight of magnesium (duralumin) Other EN 63 EN

64 Discs for the manufacture of tubular containers Other Discs for the manufacture of tubular containers Containing 0.5% or more by weight of magnesium (duralumin) Other Rolled but not further worked Other Backed Of an external diameter not exceeding 9.52 mm and a wall thickness not exceeding 0.9 mm EN 64 EN

65 Other Of aluminium alloys Aluminium tube or pipe fittings (for example: couplings, elbows, sleeves) Doors, windows and their frames and thresholds for doors Other Aluminium reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of a capacity exceeding 300 l, whether or not lined or heatinsulated, but not fitted with mechanical or thermal equipment Collapsible tubular containers EN 65 EN

66 Containers for the transport of milk Cryogenic containers Casks, drums and cans Other Aluminium containers for compressed or liquefied gas With steel core Other Pot scourers and scouring or polishing pads, gloves and the like Pressure cookers Other EN 66 EN

67 Parts of household articles Sanitary ware and parts thereof Nails, tacks, staples, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles Cloth, grill and netting, of aluminium wire Expanded sheet and strip metal Other Refined lead Containing antimony as the principal other element by weight Other 1 EN 67 EN

68 Lead waste and scrap Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm Other Powders and flakes Armoured containers for radioactive materials Bars, rods, profiles and wire Tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) Other Containing by weight % or more of zinc Containing by weight less than % of zinc EN 68 EN

69 Zinc alloys Zinc waste and scrap Zinc dust Other Wire Other Zinc plates, sheets, strips and foil Gutters, roof capping, skylight frames and other fabricated building components Tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) EN 69 EN

70 Other Tin, not alloyed Tin alloys Tin waste and scrap Tin alloy bars, rods and wire, for welding Other Plates, sheets, strips and foil of a thickness exceeding 0.2 mm Foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm; powders and flakes 1 EN 70 EN

71 Tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) Other Powder Unwrought tungsten, including bars and rods obtained simply by sintering Wire Waste and scrap Other Powder Unwrought molybdenum, including bars and rods obtained simply by sintering EN 71 EN

72 Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil Wire Waste and scrap Other Unwrought tantalum, including bars and rods obtained simply by sintering; powders Waste and scrap Other Containing at least 99.8 % by weight of magnesium Other EN 72 EN

73 Waste and scrap Raspings, turnings and granules, graded according to size; powders Other Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders Waste and scrap Other In needles Other Waste and scrap Other 1 EN 73 EN

74 Unwrought cadmium; powders Waste and scrap Other Unwrought titanium; powders Waste and scrap Other Unwrought zirconium; powders Waste and scrap Other Unwrought antimony; powders EN 74 EN

75 Waste and scrap Other Unwrought manganese; powder Waste and scrap Other Unwrought; powder Waste and scrap Other Unwrought; powders Waste and scrap EN 75 EN

76 Other Unwrought; powders Waste and scrap Other Unwrought; powders Waste and scrap Other Cermets and articles thereof, including waste and scrap Spades and shovels Forks EN 76 EN

77 Mattocks, picks, hoes and rakes Machetes Other Secateurs and similar one-handed pruners and shears (including poultry shears) Secateurs Other Scythes and sickles, hay or straw knives Other Handsaws Other EN 77 EN

78 Bandsaw blades With working part of steel Other, including parts Chainsaw blades Straight saw blades, for working metal Other Files, rasps and similar tools Pliers (including cutting pliers), pincers, tweezers and similar tools Metal-cutting shears and similar tools Pipe-cutters, bolt croppers, perforating punches and similar tools EN 78 EN

79 Non-adjustable Adjustable Interchangeable spanner sockets, with or without handles Drilling, threading or tapping tools Hammers and sledge hammers Planes, chisels, gouges and similar cutting tools for working wood For slotted screws Other Household tools EN 79 EN

80 Glaziers' diamonds Chisels Burins and tips Grease cups; grease guns Special tools for jewellers and watchmakers Tools for masons, foundry workers, cement workers, plasterers, painters (trowels, smoothers, servers, scrapers, etc.) Other Blow lamps Other Vices, clamps and the like EN 80 EN

81 Anvils; portable forges; hand or pedal-operated grinding wheels with frameworks Sets of articles of two or more of the foregoing subheadings Tools of two or more of headings 8202 to 8205, put up in sets for retail sale Trepans and crowns Drills Integral drill bits Other tools Trepans and crowns Diamond-coated Other EN 81 EN

82 Integral drill bits Other tools Dies for drawing or extruding metal Tools for pressing, stamping or punching Tools for tapping or threading Tools for drilling Tools for boring or broaching Tools for milling Tools for turning Other interchangeable tools For metalworking EN 82 EN

83 For woodworking For kitchen appliances or for machines used by the food industry For agricultural, horticultural or forestry machines Other Of tungsten carbide Other Mills and grinders Other Sets of assorted articles Table knives having fixed blades EN 83 EN

84 Other knives having fixed blades Pruning and grafting knives Other For table knives Other Handles of base metal Razors Shavers Safety razor blades, including razor blade blanks in strips Other parts EN 84 EN

85 Scissors and blades therefor Paperknives, letter openers, erasing knives, pencil sharpeners and blades therefor Manicure or pedicure sets and instruments (including nail files) Hair clippers Other Sets of assorted articles containing at least one article plated with precious metal Other sets of assorted articles Plated with precious metal Other Padlocks EN 85 EN

86 Locks of a kind used for motor vehicles Locks of a kind used for furniture For safes or strongboxes Other Clasps and frames with clasps, incorporating locks Parts Keys presented separately For motor vehicles Other Castors Other mountings, fittings and similar articles suitable for motor vehicles EN 86 EN

87 Suitable for buildings Other, suitable for furniture Other Hat-racks, hat-pegs, brackets and similar fixtures Automatic door closers Safes or strongboxes Armoured or reinforced doors and safe deposit lockers for strongrooms Other Filing cabinets, card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment, of base metal, other than office furniture of heading EN 87 EN

88 Fittings for loose-leaf binders or files Staples in strips Other, including parts Bells, gongs and the like Plated with precious metal Other Photograph, picture or similar frames; mirrors Of iron or steel Of other base metal Of iron or steel EN 88 EN

89 Of aluminium Other Other Tubular or bifurcated rivets Other, including parts Crown corks Other Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, excluding those of heading EN 89 EN

90 Coated electrodes of base metal, for electric arc-welding Cored wire of base metal, for electric arcwelding Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame Other Nuclear reactors Machinery and apparatus for isotopic separation, and parts thereof Fuel elements (cartridges), non-irradiated Parts of nuclear reactors Watertube boilers with a steam production exceeding 45 tonnes per hour EN 90 EN

91 Watertube boilers with a steam production not exceeding 45 tonnes per hour Other vapour generating boilers, including hybrid boilers Superheated water boilers Parts Boilers Parts Auxiliary plant for use with boilers of heading 8402 or Condensers for steam or other vapour power units Parts 20 5 EN 91 EN

92 Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or 1 without their purifiers Parts Turbines for marine propulsion Of an output exceeding 40 MW Of an output not exceeding 40 MW Parts Aircraft engines Outboard motors Other EN 92 EN

93 Of a cylinder capacity not exceeding 50 cm Of a cylinder capacity exceeding 50 cm3 but not exceeding 250 cm Of a cylinder capacity exceeding 250 cm3 but not exceeding cm Of a cylinder capacity exceeding cm Other engines Marine propulsion engines Of a cylinder capacity not exceeding cm Other Of a power not exceeding 130 KW (174 HP) Of a power exceeding 130 KW (174 HP) EN 93 EN

94 For aircraft engines Cylinder blocks and cylinder heads Cylinder liners Connecting rods Pistons Piston rings Carburettors and parts thereof Valves Crank cases Equipment for converting motor vehicle fuel systems to operate on fuel gas EN 94 EN

95 Other Pistons Piston rings Injectors and other parts for fuel systems Cylinder blocks and cylinder heads Cylinder liners Connecting rods Valves Crank cases Valve guides EN 95 EN

96 Piston pins Other Of an output not exceeding KW Of a power exceeding KW but not exceeding 100 KW Of an output exceeding 100 KW Parts, including regulators Of a thrust not exceeding 25 KN Of a thrust exceeding 25 KN Of an output not exceeding KW Of an output exceeding KW Of an output not exceeding 00 KW EN 96 EN

97 Of an output exceeding 00 KW Of turbojets or turbopropellers Other Reaction engines other than turbojets Linear acting (cylinders) Other Linear acting (cylinders) Other Wind or eolic engines (windmills) Other EN 97 EN

98 For aircraft engines Other Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages Other Handpumps, other than those of subheading or For aircraft engines Other, injection pumps Of fuel Of oil Other Concrete pumps EN 98 EN

99 Other reciprocating positive displacement pumps Double helicoidal screw pumps, of axial flow Other Of an output diameter not exceeding 100 mm Other Of an output diameter not exceeding 300 mm Other Injection pumps Other Liquid elevators For the distribution or sale of fuel EN 99 EN

100 For aircraft engines For fuel, oil or coolant for other engines Other OF liquid elevators Vacuum pumps Hand- or foot-operated air pumps For vehicles intended for the transport of goods Sealed or semi-sealed, of a power not exceeding 0.37 KW (1/2 HP) Sealed or semi-sealed, of a power exceeding 0.37 KW (1/2 HP) Other EN 100 EN

101 Of a power of less than 30 KW (40 HP) Other Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W Other Hoods having a maximum horizontal side not exceeding 120 cm Compressors for motor vehicles Of a power of less than 30 KW (40 HP) Of a power of at least 30 KW (40 HP) and less than KW (352 HP) Of a power of KW (352 HP) or more Other 2 EN 101 EN

102 Of compressors Other Incorporating a refrigeration unit not exceeding 300 BTU/hour Other Of a kind used for persons, in motor vehicles Incorporating a refrigeration unit not exceeding 300 BTU/hour Other Not exceeding 300 BTU/hour Exceeding 300 BTU/hour but not exceeding 2400 BTU/hour Exceeding 2400 BTU/hour Not exceeding 300 BTU/hour 1 EN 102 EN

103 Other Parts Furnace burners for liquid fuel Furnace burners for pulverised solid fuel Furnace burners for gas Combination burners Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances Parts Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals 1 1 EN 103 EN

104 Tunnel ovens Other Ovens for ceramic products Laboratory ovens Other For laboratory ovens Other Of a volume of less than 184 litres Of a volume of at least 184 litres but less than 269 litres Of a volume of at least 269 litres but less than 382 litres Other EN 104 EN

105 Of a volume of less than 184 litres Of a volume of at least 184 litres but less than 269 litres Of a volume of at least 269 litres but less than 382 litres Other Absorption-type, electrical Other CKD Other CKD Other CKD Other EN 105 EN

106 Heat pumps other than air conditioning machines of heading Compression-type Absorption-type Ice-making machines Drinking fountains Chambers or tunnels, dismountable or of panel construction, with refrigeration equipment Refrigeration units for vehicles for the transport of goods Other Furniture designed to receive refrigerating or freezing equipment Plate evaporators Condensation units Other EN 106 EN

107 Instantaneous gas water heaters Of a capacity not exceeding 120 litres Other Medical, surgical or laboratory sterilisers For agricultural products For wood, paper pulp, paper or paperboard By lyophilisation or freeze-drying units By spray-drying For minerals Other Distilling or rectifying plant EN 107 EN

108 For pasteurising Other Machinery for liquefying air or other gases For making hot drinks or for cooking or heating food Autoclaves For evaporation For roasting For sterilisation Other Of water heaters Other EN 108 EN

109 For the bakery, pastry and biscuit industries Other Cylinders Other Cream separators Clothes dryers Of laboratory For the sugar industry For the paper and cellulose industry Other Domestic 20 5 EN 109 EN

110 Other For filtering or purifying beverages other than water Petrol filters for injection engines Other Filter presses Magnetic and electromagnetic filters Filters designed solely or mainly for the medical instruments and appliances of heading Tubular grid filters for production wells Other Intake air filters for internal combustion engines Cyclone purifiers EN 110 EN