Product Image: Brief Description:

Transcription

1 Brand: BULWARK Model Number: BW 627A Brown Sportz Product Image: Brief Description: BULWARK 627A Sportz Safety Shoe with Direct Moulded PU Double Density and upper Buff Suede Brown Leather. Provides Sporty Look with maximum comfort with Fatigue Reducing Gel Insole. Approval and Certification: CE (EN 20345) & AS per IS Appearance & Design: Design: Low Ankle safety shoe designed for maximum safety and comfort. Anatomically shaped lasts with curved heel and rounded edges for greater comfort after long periods of wear Upper Height: As per IS (Part 1):2011 / ISO 20345

2 Process: Manufactured by Direct Moulded Process (DMP) without using nails. Upper: Material: Buff Suede Brown. Color: Brown Thickness: mm Tear Strength: 120 Newton s (Minimum) as per ISO 3377 Water Vapor Permeability: Not Less than 0.8mg /cm 2 Water Vapor Coefficient: Not Less than 20mg /cm 2 ph Value of the upper Leather: Not <3.5 (If ph is below 4 then differential figure shall be less then 0.7). Vamp & Quarter Lining: Vamp Lining Material: Brown / Grey Skin Fit N 170 D Tear Strength: 15 Newton s (minimum) Abrasion resistance: Dry Condition - no hole before Cycles. Wet condition - no hole before Cycles. Water Vapor Permeability: Not Less than 2.0 mg /cm 2 Water Vapor Coefficient: Not Less than 30 mg /cm 2 Quarter lining material: Ultra breathable distance mesh lining with antimicrobial treatment for odour Control and more comfortable feet Insole Sole: Material: Nonwoven Stroble Insole not less than 2mm thick with less Fatigue Gel. Water Vapor absorption: Not Less than 35% (m / m) Water desorption: Not Less than 40% (m / m) of the water absorbed ph Value of the upper Leather: Not < 3.5 (If ph is below 4 then differential figure shall be less then 0.7).

3 Material : Double Density Flexible Polyurethane Dark Brown / Light Brown Manufacturing Process : Direct Moulded Process (DMP) Relative Density : Heat resistance : Up to 150 Centigrade Electrical resistance: Up to 15 KV Shore hardness : Up to 60 Shore A Tear strength : Not less than 5 Kilo Newton s / m Abrasion resistance : Less than 250 mm 3 Flexing resistance : Maximum 4mm cut growth before flexes Fuel Oil resistance : Increase in volume not greater than 12% Other Properties : Anti-skid, Anti Static (100 ohms to 1000 Mega ohms), Oil & Water Resistant Toe Cap Material: Steel / Composite Toe Cap Impact resistance : Minimum 14 mm clearance on 200 Joules impact as per EN Compression resistance : Minimum 14mm clearance on putting a load of 15 Kilo Newton Pattern: Broad steel toe for Maximum comfort Thread Material: Nylon or Polyester Colour: Grey Properties: Z twist, oil, chemical proof Laces Material: Nylon (Flat) Colour: Brown Length: 85 +/- 5 cm Size Size Range : Available in sizes 2 to 12 (36-46)

4 Eyelets Material : D Ring Oxidised Black in steel Numbers : 4 each side Warranty / Guarantee Period : 06 months (In case of manufacturing defect within the warranty period shoe will be replaced free of cost ) Material Testing Laboratory : FDDI - Noida Special Features: Molded Grey Sock with Less fatigue reducing GEL + Energy Absorbing media filled in cavity Broad steel toe for Maximum comfort Socks & Insole are design to provide maximum comfort to the wearer. Rugged High ankle design, padded collar and tongue for comfort, anatomically shaped lasts with curved heel and rounded edges for greater comfort after long periods of wear. Anti-twist heel for greater stability and protection from ankle twisting Direct Moulded double density extra wide PU sole for long life High density outer sole with low profile for high surface contact, slip resistant, oil resistant, abrasion resistant Soft, low density mid sole ensures good shock absorption and excellent comfort even when worn for long periods Heat resistant for brief exposure up to 150 C and electrical shock resistant up to 15 KV

5 Ultra breathable SPACER lining with antimicrobial treatment for odour control and more comfortable feet. Insole with moisture control system creating a superior foot climate and improved comfort BENEFITS OF GEL HEEL SOCKS GEL spreads and takes the shape of the heel GEL evenly distributes the weight over a larger area GEL pad contains high grade mineral oil that protects heel from pressure sores Reduces fatigue by 40% over prolonged hours of standing and working Delivers 20% additional manpower productivity