Features. FX22 Series

Transcription

1 FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact structure The independent double beam contact structure provides self-cleaning feature, ensuring highcontact reliability. (Fig.2) 3. Current capacity :.7A/pin The FX22 features a high current capacity of.7a/pin relative to its.5mm pitch. 4. Effective mating length of 1.5mm The signal contacts have effective contact lengths of 2.mm and 1.5mm, which provide sufficient margin on the mating stroke. 5. Low connector height The compact structure and low connector height fits well into areas as small as 5mm spacing, allowing for higher density mounting. (Fig.3) 6. Self-alignment and self-guiding structure Guide posts enable self-alignment and ensure a secure connection. A double-beam contact structure Mated connector dimensions 15 Fig.1 Fig FX22-**S-.5SH FX22-**P-.5SH Fig

2 FX22 Series.5mm pitch Board-to-Board connectors with floating structure Product Specifications Ratings Rated current.7a Rated voltage AC 5V Operation temperature range : -55 to 85 (Note 1) Storage temperature range : -1 to 6 (Note 2) Items Specifications Conditions 1. Contact resistance 7mø max. 1mA (DC or 1Hz) 2. Insulation resistance 1Mø min. 1V DC. 3. Withstanding voltage No flashover or breakdown. 15V AC for 1min. 4. Mating Cycles 8mø max. 5 times insertions and extractions. 5. Vibration resistance 6. Shock resistance 7. Moisture resistance 8. Temperature cycle No electrical discontinuity for more than 1 s. No electrical discontinuity for more than 1 s. 8mø max Insulation resistance : 1Mø min. 8mø max Insulation resistance : 1Mø min. Frequency : 1 to 55 to 1Hz, approx 5 min Single amplitude :.75mm, 1 cycles for 3 axial directions. 49m/s 2, duration of pulse 11ms at 3 times for 3 both axial directions. Exposed at 4 ± 2, 9~95%, 96h. Temperature : Time : 3 3 min, for 5 cycles Note 1 : Includes temperature rise caused by current flow. Note 2 : The term "storage" here refers to products stored for a long period prior to board mounting and use. Materials / Finish Part Material Finish UL standard Insulator Header Receptacle PA LCP Black q Series name : FX22 w Number of contacts e Connector type S : Receptacle type P : Header type r Contact pitch :.5mm t Product style SH : Right-angle type UL94V- Header Contact area : Gold plated Contact Copper alloy Receptacle Mounting area : Gold plated Metal fitting Brass Tin plated Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Right-angle receptacle FX22-8 S -.5 SH q Right-angle header FX22-8 P -.5 SH q w w e e r r t t 2

3 FX22 Series.5mm pitch Board-to-Board connectors with floating structure Right-angle receptacle ** A±.2 B±.2 P=.5±.15 Contact No. D Polarization mark 6.85±.3 Contact No. D C±.25 A±.2 B±.2 P=.5±.15 Part No. HRS No. No. of contacts A B C D FX22-4S-.5SH FX22-5S-.5SH FX22-6S-.5SH FX22-8S-.5SH Right-angle header **.2± ±.2.8± ±.3.8± ±.3 2.6±.2 Polarization mark 5.1± ±.4 4.2±.3 C± ±.15.8± ±.3 2.6±.2 Part No. HRS No. No. of contacts A B C D FX22-4P-.5SH FX22-5P-.5SH FX22-6P-.5SH FX22-8P-.5SH

4 FX22 Series.5mm pitch Board-to-Board connectors with floating structure Recommended PCB layout dimensions (PCB thickness : t = 1.6mm / Stencil thickness : t =.12mm) Right-angle receptacle ** 4-Ø Ø (Through hole).3±.3 P=.5± ± ±.5 2.6±.5 4-Ø PCB edge Right-angle header ** 4-Ø (Through hole) 2.6±.5 PCB edge A±.5 B±.5 P=.5±.3.3±.3 A±.5 B± ± ±.5 A B 4 contacts contacts contacts contacts A B 4 contacts contacts contacts contacts

5 FX22 Series.5mm pitch Board-to-Board connectors with floating structure Embossed tape packaging dimensions Right-angle receptacle Ø1.5.1 P=4±.1 P=16±.15 2±.2 Un-reeling direction Reel dimension diagram B±.3 A±.3 Ø82max Ø382max C±.3 Ø13±.2 Ø21± (7.1) (.5) Right-angle header Ø P=4±.1 P=2±.15 2±.2 Part No. A B C D E FX22-4S-.5SH FX22-5S-.5SH FX22-6S-.5SH FX22-8S-.5SH Embossed packaging : 7pcs/reel Un-reeling direction C±.3 B±.3 A±.3 Ø13±.2 Ø21±.8 D +2 (E) Reel dimension diagram Ø82max Ø382max D +2 (E) (7.1) (.5) Part No. A B C D E FX22-4P-.5SH FX22-5P-.5SH FX22-6P-.5SH FX22-8P-.5SH Embossed packaging : 5pcs/reel 5

6 Powered by TCPDF ( FX22 Series.5mm pitch Board-to-Board connectors with floating structure Recommended Temperature Profile This temperature profile is based on the setting conditions shown below and is for reference only. For individual applications, the temperature profile may vary in accordance with the conditions. Please confirm the profile before mounting. temperature ( ) 15 Cleaning conditions Organic Solvent-based cleaning Solvent type Room temperature cleaning Heated cleaning IPA (Isopropyl alcohol) Water based cleaning When using water based cleaning agents (including terpene, and alkali saponifiers), pay special attention to how the cleaning agent will react to specific metals and plastics before selecting one of them. Various cleaning agent manufacturers publish reaction tables for their cleaning agents. Do not leave connectors with moisture remaining on them. Caution when washing The electrical performance may deteriorate if the flux or cleaning detergent is left on the connector after the cleaning. Check thoroughly to ensure that there is no residue left on any of the surfaces. Precautions 2 (Peak temperature: 25 max.) (9 to 12 sec) 22 <Applicable conditions> Test PCB Size : mm Material : Glass epoxy Solder composition : Sn-3Ag-.5Cu Flux contained amount : 11wt% Metal mask thickness :.12mm Note 1 : This temperature profile shows recommended values. Note 2 : The number of reflow processes should be no more than two. Note 3 : Temperature profile may differ slightly depending on the type and amount of solder cream used. Avoid supporting the PCB only by the connectors. Please make sure to support the PCBs with screws, bolts, or other types of anchors as the primary means of support. When using low profile connectors, care should be taken not to use excessive prying or rotating forces during mating/unmating operations. This could cause damage and contact failure. Please handle with care ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 3/216. Contents are subject to change without notice for the purpose of improvements.