Standard Tube & Pipe Adapters

Transcription

1 Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls Please inquire about price and availability on any size not listed. Mitered Elbows * Please call for information on mitered elbows in pipe sizes. OD A Dim. B Dim. 1-1/ / / Tees OD / NPS E Dim. F Dim. 1-1/ / Wyes OD / NPS 30 Deg 45 Deg 60 Deg C Dim D Dim C Dim D Dim C Dim D Dim 1-1/ /

2 Laterals * Laterals are also available in 15 degree. OD / NPS 30 Deg 45 Deg 60 Deg A Dim B Dim A Dim B Dim A Dim B Dim 1-1/2-2-1/ / Special Tube & Pipe Adapters Line Size Adapters (Also called concentric reducers.) 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls Please specify OD and wall thickness for both ends when ordering. Parallel Laterals (Also called parallel wyes or diverter wyes.) OD 30 Deg 45 Deg F Dim C Dim F Dim C Dim 1-1/ / / * Please call for information on parallel laterals in pipe sizes. Dimensions listed are typical. We can fabricate to your specifications. 2

3 3-Pc. Mitered Bends (Also called segmented elbows.) * Please call for information on 3-pc. Mitered Bends in pipe sizes. Dimensions listed are typical for 90 degree bends. We can fabricate to your specifications, and in many other degrees. Manifolds OD A Dim. E Dim / / OD A Dim. B Dim. C Dim. D Dim / * Please call for information on Manifolds in pipe sizes. Dimensions listed are typical for this type of manifold. We can fabricate to your specifications, and in many other configurations (see graphic above). Bifurcated Elbows (Also called bifurcated wyes.) 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc- Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls. All common degrees of bend and center line radii available. 3

4 Flanged Stubs * Flanges used are ½ thick, 150 lb., with standard ANSI bolt patterns. OD A Dim. B Dim. 1-1/ / / Tube to Pipe Thread Adapters 1-1/2 through 10 sizes. 16, 14, 11, 12 Gauge wall thicknesses. Aluminum, Carbon Steel, Stainless Steel, Galvanized (Zinc-Coated) Steel OD Male NPT Female NPT Length NPT Length NPT 1-1/ / / / / / / / / / / / / Tube & Pipe Plate Flanges 2 through 12 OD and NPS sizes. Slip-on, flat face style. ½ thick, 150 lb. Drilling. ANSI standard bolt patterns. Aluminum, Carbon Steel, Stainless Steel, Galvanized (Zinc-Coated) Steel 4

5 Drop Tees Combines a tee and a mitered elbow in one fabrication. Common sizes are 1-1/2 to 4 OD tube, 2 to 4 NPS pipe Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized Steel by special order. End Caps For capping material lines, a 6 length of tube or pipe with one end capped off. Install using compression coupler (sold separately). Common sizes are 1-1/2 to 4 OD tube, 2 to 4 NPS pipe Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized Steel by special order. O-Ring End Caps Faster and more economical than fabricated end caps. One half of an O-ring coupler w/ one end capped. Common sizes are 1-1/2 to 4 OD tube, 2 to 4 NPS pipe. Standard in Galvanized Steel End Plugs An economical alternative to end caps. Sold in pipe sizes, but will accommodate many tube sizes. Flexible rubber collar expands against tube or pipe wall as wing or hex nut is tightened Common sizes are 1-1/2 to 4 OD tube, 1 to 4 NPS pipe. 5

6 Slip Couplings (also called Slip Sleeves or Solid Sleeves) For tube only, a sleeve that fits over tube or fitting ends, and is either glued welded or covered with a shrink sleeve. Standard sizes are 1-1/2 to 10 OD Tube For use in systems under 15PSI. * Inquire about heat shrinkable polyolefin shrink sleeves. Eliminate gluing brazing and welding. Offsets Frequently used with parallel lateral adapters. Common sizes are 1-1/2 to 4 OD tube, 2 to 4 NPS pipe. Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized by special order. When ordering, please specify center to center distance, as well as tube or pipe size and wall thickness. Tube Wall Thickness Key 16 Gauge = Gauge = Gauge = Gauge =.120 Tube / Pipe Cross Reference Key 3 NPS SCH 5 = 3-1/2 OD 14 GAUGE 3 NPS SCH 10 = 3-1/2 OD 11 GAUGE 3-1/2 NPS SCH 5 = 4 OD 14 GAUGE 3-1/2 NPS SCH 10 = 4 OD 11 GAUGE 4 NPS SCH 5 = 4-1/2 OD 14 GAUGE 4 NPS SCH 10 = 4-1/2 OD 11 GAUGE 6