PRODUCTNEWS Hardness Tester Rockwell / Super Rockwell / Brinell Type Durotwin Plus

Transcription

1 PRODUCTNEWS Hardness Tester Rockwell / Super Rockwell / Brinell Type Durotwin Plus Detailed information on page 421.

2 Testing Härteprüfgeräte Equipements and Seismometer Hardness Tester Rockwell / Super Rockwell / Brinell Pages Hardness Tester Micro-Vickers Pages Hardness Tester Vickers Page 431 Hardness Tester Vickers + Brinell Pages Portable Hardness Tester Shore Pages Portable Hardness Testing Devices Pages

3 Hardness Tester Rockwell/Super Rockwell Type Durotwin Rockwell/Super Rockwell/Brinell Type Durotwin Plus Robust and user-friendly manual Rockwell, Super Rockwell and Brinell hardness testers. Series 963 Standard accessories 19BAA072 Diamond indenter 56AAJ087 Carbide indenter 1 /16 Flat table Ø 63 mm V-anvil Ø 41 mm, groove width 25 mm Dust protection cover Hardness testing block HRC Hardness testing block HR30N Level Aditional standard accessories Durotwin Plus 19BAA279 Carbide indenter Ø 2,5 mm Hardness testing block 350 HBW 2,5/187,5 19BAA072MPA Diamond indenter (incl. MPA certificate) 56AAJ082 Carbide indenter 1 /8 56AAF540MPA Carbide ball 1 /16 56AAG233MPA Carbide ball 1 / Round table Ø 200 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, V-anvil Ø 10 mm, groove width 8 mm, Point anvil (diamond tipped for Super-Rockwell) Point anvil (Ø 12 mm) Point anvil (Ø 5,5 mm) R Model Durotwin Durotwin Plus No R Rockwell Scales A D C (Diamond indenter) Scales A D C (Diamond indenter) Scales F B G ( 1 /16 Carbide ball indenter) Scales F B G ( 1 /16 Carbide ball indenter) Scales H E K* ( 1 /8 Carbide ball indenter) Scales H E K* ( 1 /8 Carbide ball indenter) Super Rockwell (Scales N, T) Scales 15N 30N 45N (Diamond indenter) Scales 15N 30N 45N (Diamond indenter) Scales 15T 30T 45T ( 1 /16 Carbide ball indenter) Scales 15T 30T 45T ( 1 /16 Carbide ball indenter) Brinell** Scale HBW5/125* (5 mm Carbide ball) Scale HBW2,5/187,5 (2,5 mm Carbide ball) Scale HBW2,5/62,5 (2,5 mm Carbide ball) Scale HBW2,5/31,25 (2,5 mm Carbide ball) * Accessories (optional) No No R Rockwell Super Rockwell (Scales N, T) Brinell** Preliminary test force (N) 98,07 29,42 98,07 Test force (N) 588,4; 980,7; ,1; 294,2; 441,3 306,5; 612,9; 1226; 1839 Graduation 0,5 HR 1 HR Display Analogue Stand microscope* Mass 44 kg 48 kg * Accessories (optional) ** Indentations must be measured using a measuring microscope (not supplied with the instrument). Additional optional accessories Durotwin Plus 19BAA280 Carbide indenter Ø 5 mm 19BAA162 Replacement carbide ball indenter Ø 5 mm (1 pce.) 19BAA318D Stand microscope 40 x 19BAA319D Stand microscope 100 x 56AAE497 Replacement carbide ball indenter Ø 2,5 mm (5 pcs.) 56AAE498D Hardness testing block 350 HBW 2,5/187,5 (incl. MPA certificate) Request our detailed brochure! 422

4 Standard accessories Durotwin DT10-IS-D 19BAA072 Diamond indenter Flat table Ø 63 mm, V-anvil Ø 41 mm, groove width 25 mm, dust protection cover, hardness testing block HRC, level Durotwin DT10-IS-D 56AAJ087 Carbide indenter 1 /16 56AAF540MPA Replacement carbide ball indenter 1 /16 (1 pce.) 56AAJ082 Carbide indenter 1 /8 56AAF540MPA Replacement carbide ball indenter 1 /8 (1 pce.) Round table Ø 200 mm Standard accessories Durotwin D 19BAA072 Diamond indenter 56AAJ087 Carbide indenter 1 /16 Flat table Ø 63 mm, V-anvil Ø 41 mm, groove width 25 mm, dust protection cover, hardness testing block HRC, hardness testing block HR30N, level Durotwin D 56AAF540MPA Replacement carbide ball indenter 1 /16 (1 pce.) 56AAJ082 Carbide indenter 1 /8 56AAG233MPA Replacement carbide ball indenter 1 /8 (1 pce.) Round table Ø 200 mm Standard accessories Durotwin Plus D 19BAA072 Diamond indenter 56AAJ087 Carbide indenter 1 /16 19BAA279 Carbide indenter Ø 2,5 mm Flat table Ø 63 mm, V-anvil Ø 41 mm, groove width 25 mm, dust protection cover, hardness testing block HRC, hardness testing block HR30N, hardness testing block 350 HBW 2,5/187,5, level Durot win Plus D 56AAF540MPA Replacement carbide ball indenter 1 /16 (1 pce.) 56AAJ082 Carbide indenter 1 /8 56AAG233MPA Replacement carbide ball indenter 1 /8 (1 pce.) 19BAA280 Carbide indenter Ø 5 mm (1 pce.) 19BAA162 Replacement carbide ball indenter Ø 5 mm (1 pce.) 19BAA318D Stand microscope 40 x 19BAA319D Stand microscope 100 x Round table Ø 200 mm for all Durotwin devices V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, V-anvil Ø 10 mm, groove width 8 mm, Point anvil (diamond tipped for Super-Rockwell) Point anvil (Ø 12 mm) Point anvil (Ø 5,5 mm) Hardness Tester Rockwell Type Durotwin DT10-IS-D Rockwell/Super Rockwell Type Durotwin D Rockwell/Super Rockwell/Brinell Type Durotwin Plus D Sturdy and simple to operate Rockwell, Super Rockwell and Brinell hardness testers. Hardness Tester according to DIN EN ISO and DIN EN ISO Series D Model Durotwin DT10-IS-D Durotwin D Durotwin Plus D No D D D Rockwell Scales A D C Scales A D C Scales A D C (Diamond indenter) (Diamond indenter) (Diamond indenter) Scales F B G* Scales F B G Scales F B G ( 1 /16 Carbide ball indenter) ( 1 /16 Carbide ball indenter) ( 1 /16 Carbide ball indenter) Scales H E K* Scales H E K* Scales H E K* ( 1 /8 Carbide ball indenter) ( 1 /8 Carbide ball indenter) ( 1 /8 Carbide ball indenter) Super Scales 15N 30N 45N Scales 15N 30N 45N Rockwell (Diamond indenter) (Diamond indenter) (Scales N, T) Scales 15T 30T 45T Scales 15T 30T 45T ( 1 /16 Carbide ball indenter) ( 1 /16 Carbide ball indenter) Brinell** Scale HBW5/125* (5 mm Carbide ball) Scale HBW2,5/187,5 (2,5 mm Carbide ball) Scale HBW2,5/62,5 (2,5 mm Carbide ball) Scale HBW2,5/31,25 (2,5 mm Carbide ball) * Accessories (optional) No D No D No D Rockwell Super Rockwell (Scales N, T) Brinell** Preliminary test force (N) 98,07 29,42 98,07 Test force (N) 588,4; 980,7; ,1; 294,2; 441,3 306,5; 612,9; 1226; 1839 Graduation 0,1 HR 0,1 HR Display Digital Stand microscope* Mass 44 kg 48 kg * Accessories (optional) ** Indentations must be measured using a measuring microscope (not supplied with the instrument). 423

5 Hardness testing systems Rockwell / Super Rockwell / Brinell type Wizhard Hardness testing systems according to DIN EN ISO and DIN EN ISO Varying Rockwell, Rockwell Superficial (Scales N, T) and Brinell test forces. Electronic real-time load control for precise adjustment. This avoids the possibility of applying excessive test forces. Auto-stop elevating table with automatic application of preliminary test force. Beak-shaped extension arm for improved access to internal and external surfaces. Graphic illustration of statistical results and the widest range of key statistical values. Evaluation function OK/Not OK. Automatic selection of test force: The required hardness test is defined in advance and the test force automatically selected. Series 810 Operation via control unit (HR 511) D D Operation via touch screen (HR 521 / HR 522 / HR 523) D Request our detailed brochure! 424

6 Standard accessories 19BAA073 Diamond indenter, min. hole-ø 40 mm 19BAA074 Steel ball indenter 1 /16 19BAA082 Replacement steel ball 1 /16 (10 balls) Flat table Ø 64 mm V-anvil Ø 40 mm, groove width 30 mm, BAA123 Hardness testing block HRC 19BAA125 Hardness testing block HRC 19BAA126 Hardness testing block HRB 19BAA128 Hardness testing block HR30N 19BAA129 Hardness testing block HR30T 19BAA517 Dust protection cover 19BAA098 Level 19BAA072MPA Diamond indenter (incl. MPA certificate) 19BAA292MPA Diamond indenter, min. hole-ø 22 mm 19BAA075 Steel ball indenter 1 / Round table Ø 180 mm Round table Ø 250 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, V-anvil Ø 10 mm, groove width 8 mm, V-anvil length 400 mm, groove width 50 mm, Point anvil (diamond tipped for Super-Rockwell) Point anvil (Ø 12 mm) Point anvil (Ø 5,5 mm) Optional accessory for Brinell hardness testing No. 19BAA277 19BAA279 19BAA280 19BAA284 19BAA281 19BAA283 19BAA162 19BAA163 19BAA318 D 19BAA319 D Designation Carbide ball indenter Ø 1 mm Carbide ball indenter Ø 2,5 mm Carbide ball indenter Ø 5 mm Carbide ball indenter Ø 10 mm Replacement carbide ball indenter Ø 1 mm (1 pce.) Replacement carbide ball indenter Ø 2,5 mm (1 pce.) Replacement carbide ball indenter Ø 5 mm (1 pce.) Replacement carbide ball indenter Ø 10 mm (1 pce.) Stand microscope 40 x Stand microscope 100 x Further certified hardness comparison plates on request. Hardness testing systems Rockwell / Super Rockwell / Brinell type Wizhard Model HR 511 HR 521 / HR 522 / HR 523 Control unit operation Via touch screen Test force control Data offset Measured value compensation for cylindrical and spherical surfaces Conversion to other hardness scales HV, HK, HBS, tensile strength, HRA, HRB, HRC, HRD, HRF, HRG, HR15T, HR30T, HR45T, HR15N, HR30N, HR45N, HS, HB (HBS) Statistical functions Tolerance evaluation Number of values, max., min., average value, range, upper limit, lower limit, standard deviation, number of OK/Not OK evaluations (via data output only) storage of 1024 values Intender Number of values, max., min., average value, range, upper limit, lower limit, standard deviation,number of OK/Not OK evaluations histogram, _ X-R control card storage and editing of 1024 values Model HR 511 HR 521 HR 522 HR 523 No D D D D Preliminary test force (N) 29,42; 98,07 Test force Rockwell (N) 588,4; 980,7; 1471 Super Rockwell (N) 147,1; 294,2; 441,3 (Scales N, T) Brinell* (ball-ø/kg) HBW 2,5/187,5 HBW 1/10; HBW 1/30; HBW 2,5/6,25; HBW 2,5/15,625; HBW 2,5/31,25; HBW 2,5/62,5; HBW 2,5/187,5; HBW 5/25; HBW 5/62,5; HBW 5/125; HBW 10/100 Automatic (load, dwell, unload) Load process Display unit Control unit LCD Touch-Screen Test load selection via keyboard via Touch-Screen Effective period 0 to 120 sec (in 1 second increments) Max. workpiece size Height: 250 mm, Depth: 150 mm from center of indenter Table movement manual fully automatic Data output RS-232 C / DIGIMATIC / Centronics Power supply 230 V, 50/60 Hz Dimensions (W x D x H) Main unit 250 x 670 x 605 mm Mass Main unit approx. 60 kg * Indentations must be measured using a measuring microscope (not supplied with the instrument). 425

7 Hardness Tester Rockwell Analog: Analog standard models with automatic loading, duration and disengagement of additional test force. Test methods HRA, HRC, HRD (diamond cone) HRF, HRB, HRG (steel ball 1 /16 ). Automatic zero positioning of the analog dial indicator when applying test forces with the spindle wheel. Digital: Hardness Tester according to DIN EN ISO Digital standard model with automatic loading, duration and disengagement of additional test force. Large LED display with tolerance evaluation function. Series 810 Analogue and digital types. Standard accessories 19BAA072 Diamond indenter 19BAA074 Steel ball indenter 1 / Flat table Ø 64 mm 19BAA123 Hardness testing block HRC 19BAA125 Hardness testing block HRC 19BAA126 Hardness testing block HRB 19BAA111 Dust protection cover D D D 19BAA072MPA Diamond indenter (incl. MPA certificate) D Printer DP-1 VR Round table Ø 180 mm Round table Ø 250 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, V-anvil Ø 10 mm, groove width 8 mm, V-anvil length 400 mm, groove width 50 mm, Point anvil (Ø 12 mm) Point anvil (Ø 5,5 mm) Special table for Jominy-Test Variable support arm (length 250 mm) Further certified hardness comparison plates on request. Consumables No. 19BAA097 Designation Lamp (10 pcs.) Model AR 10 AR 20 ARK 600 No D D D Version Rockwell Preliminary test force (N) 98,07 Test force (N) 588,4; 980,7; 1471 Table movement manual Preliminary test force Manual adjustment Load process Additional test force: automatic (loading, duration, unloading) Effective period adjustable Display Analog dial LED (4 digit) Resolution/ Graduation 0,5 0,1 Max. workpiece height 165 mm 140 mm Max. workpiece depth 115 mm (from the center of the indenter shaft) 122 mm (from the center of the indenter shaft) 122 mm (from the center of the indenter shaft) Data output RS-232 C / DIGIMATIC Dimensions (W x D x H) 215 x 445 x 682 mm 210 x 486 x 680 mm 210 x 486 x 680 mm Mass 38 kg 40 kg 40 kg Request our detailed brochure! 426

8 Hardness Tester Rockwell/Super Rockwell Hardness Tester according to DIN EN ISO Digital standard models with automatic loading, duration and disengagement of additional test force. Tests according to Rockwell and Super Rockwell (Scale N, T). Large LED display with tolerance evaluation function. Standard accessories 19BAA073 Diamond indenter 19BAA074 Steel ball indenter 1 / Flat table Ø 64 mm 19BAA123 Hardness testing block HRC 19BAA125 Hardness testing block HRC 19BAA126 Hardness testing block HRB 19BAA128 Hardness testing block HR30N 19BAA129 Hardness testing block HR30T 19BAA112 Dust protection cover 19BAA072MPA Diamond indenter (incl. MPA certificate) D Printer DP-1 VR Round table Ø 180 mm Round table Ø 250 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, V-anvil Ø 10 mm, groove width 8 mm, V-anvil length 400 mm, groove width 50 mm, Point anvil (diamond tipped for Super-Rockwell) Point anvil (Ø 12 mm) Point anvil (Ø 5,5 mm) Special table for Jominy-Test Variable support arm (length 250 mm) Further certified hardness comparison plates on request. Consumables No. 19BAA097 Designation Lamp (10 pcs.) Series 810 Digital type D Model ATK 600 No D Version Rockwell / Super Rockwell Preliminary test force (N) 98,07 / 29,42 Test force (N) 588,4; 980,7; 1471; 147,1; 294,2; 441,3 Table movement manual Load process automatic (loading, duration, unloading) Effective period adjustable Display LED (4 digit) Resolution Rockwell / Super Rockwell 0,1 / 0,2 Max. workpiece height 140 mm Max. workpiece depth 122 mm (from center of the indenter ball) Data output RS-232 C / DIGIMATIC / Centronics Dimensions (W x D x H) 210 x 486 x 720 mm Mass 42 kg 427

9 Hardness Tester Micro-Vickers Type HM-100 Hardness tester according to DIN EN ISO 6507 and JIS B7725. Micro-Vickers hardness tester with Vickers tests from HV 0.01 HV 1. Up to 3 objectives can be connected that can all be used for indent measurement (except HM-101). A Knoop indenter can also be connected. Manual lens system switch. Series 810 Standard accessories x Objective x Objective 19BAA058 Diamond indenter XY table (HM-101) XY table (HM-112) Vice, max. 45 mm groove width 10BAA445 Camera-Adapter for CCD-camera 19BAA109 Dust protection cover 19BAA007 Hardness testing block (700 HV0.3) Vickers hardness testing table (HM-101) Halogen lamp (6 V/20 W) built-in (all models) Level D D Model HM-112 Touch screen operation Reading of diagonals D1 and D2 Reading of hardness values Reading of XY stage position Test conditions such as test force or effective period Tolerance evaluation Measured value compensation when testing cylindrical or spherical surfaces Control of automatic lens system switch Conversion into other hardness scales Soft: HV, HK, HBS, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Statistical functions Number of values, max., min., average value, range, upper limit, lower limit, standard deviation, number of OK/Not OK evaluations, storage and editing of 256 values Test force HM-101 HM-112 HV HV0.01 HV0.025 HV0.05 HV0.1 gf mn 98,07 245,2 490,3 980,7 HV HV0.2 HV0.3 HV0.5 HV1 gf mn Model HM-101 HM-112 No D D Loading process automatic (loading, duration, unloading) Effective period 5 30 s (in 5 sec increments) 5 90 s (in 1 sec increments) Lens system 10 x; 50 x 10 x; 50 x Lens system switch manual Magnification 100 x; 500 x 100 x; 500 x Min. resolution 0,2 µm (50 x Objective) 0,01 µm Reading of hardness values at Vickers table via Touch Screen XY-stage dimensions 100 x 100 mm Traveling range 25 x 25 mm Graduation 0,01 mm 0,001 mm (Digital) Max. workpiece size height 95 mm; depth 150 mm (from center of the indenter shaft) Observation by micrometer eyepiece Data output RS-232 C / DIGIMATIC / Centronics Dimensions (W x H x D) Main unit 410 x 600 x 590 mm Mass Main unit 42 kg 19BAA059MPA Diamond indenter (incl. MPA certificate) x Objective* x Objective* x Objective* x Objective* x Objective* * Installation by Mitutoyo XY table 50 x 50 mm, Table dimensions 125 x 125 mm Vice, max. 100 mm groove width Thin plate holder, (max. specimen thickness 5 mm) Wire holder horizontal, (max. Ø 3,2 mm) Wire holder vertical, (max. Ø 3,2 mm) Rotary table Special vice, swiveling (horizontal / vertical) Universal specimen holder Specimen holder, adjustable, for thin plates Further certified hardness comparison plates on request. Software with camera for measuring and evaluation on request. 428

10 Standard accessories 19BAA x Eyepiece 19BAA x Objective (HM-221 only) 19BAA x Objective x Objective 19BAA058 Diamond indenter Vickers (HM-211) 19BAA059 Diamond indenter Vickers (HM-221) XY table digital Vice, max. 51 mm groove width Optical green filter 11BAA961 Eye cup for eyepiece 19BAA522 Camera-Adapter 02DEA471 Dust protection cover 19BAA007 Hardness testing block (700 HV0,3) Batteries (SR-44) 19BAA207 Halogen lamp (12 V/50 W) Hardness Testers Micro-Vickers Type HM-200 Hardness testers according to DIN EN ISO 6507 and JIS B Multifunctional. Built-in LCD color monitor with touch screen operation. Standard equipped with motorized and manual lens changer. These devices operate without deadweight by simple electromagnetic test force application. Lens changer may be equipped with up to 4 lenses and up to 2 indenters (Knoop/Vickers). Lenses with extremely large working distance. Camera port as standard. Test forces from HV 0,00005 to HV 2 (depending on the type of device). Series 810 Servo powered and manual lens system switch as standard D Lenses and indenters Max. 4 lenses and max. 2 indenters (Knoop and Vickers) Request our detailed brochure! D with camera and monitor (optional accessories) Test force HM-211 HM-221 HV HV HV HV HV HV gf mn 0,4903 0,9807 1,961 2,942 4,903 HV HV0.001 HV0.002 HV0.003 HV0.005 gf mn 9,807 19,61 29,42 49,03 HV HV0.01 HV0.02 HV0.03 HV0.05 HV0.1 gf mn 98,07 196,1 294,2 490,3 980,7 HV HV0.2 HV0.3 HV0.5 HV1 gf mn HV HV2 gf 2000 mn A freely definable test force may be set. 429

11 Hardness Testers Micro-Vickers HM-200 Model HM-211 HM-221 No D D Loading process automatic (loading, duration, unloading) Selection of test force via touch screen Test force mechanism Electromagnetic force application Effective period s in 1-second increments Turret head mechanism automatic or manual Max number of lenses 4 Max. number of indenters 2 (1 pce. standard / 1 pce. option) Lens system (standard) 10 x; 50 x 10 x; 50 x; 100 x Eyepiece (standard) 10 x Working distance, lens 10 x = 5,6 mm / 50 x = 1,1 mm / 100 x = 2,5 mm XY-stage dimensions 100 x 100 mm Traveling range 25 x 25 mm Min. resolution, table 1 µm (built-in micrometer) Max. workpiece size height 133 mm; depth 160 mm (from center of indenter) Max. workpiece weight 20 kg incl. table and vice Display LCD Touch Panel Data output RS-232 C, Parallel (Centronics), DIGIMATIC Dimensions (W x H x D) Main unit 400 x 600 x 640 mm Mass Main unit 43 kg Touch panel functions and display Hardness value conversion: SAE-table, ASTM table, DIN , BS i860, Mitutoyo Diagonals D1 / D2: max. 5 digits A Resolution: for lens $ 50 x 0,01 µm / for lens, 50 x 0,1 µm Further displayed Hardness value max. 4 digits, min. 0,1 HV/HK data / values Test force Indenter (HV/HK) Duration of load / effective period / unload Tolerance evaluation NG / GO / +NG X/Y stage position Measured value compensation for cylindrical and spherical surface measurements Measured value compensation general (offset) Turret head position Conversion to other hardness scales Statistical functions Display languages: German, Japanese, English, French, Italian, Spanish * 5 x Objective W.D. 13,5 mm * 20 x Objective W.D. 1,8 mm 19BAA440* 100 x Objective W.D. 2,5 mm 19BAA061** Knoop-indenter for HM BAA062** Knoop-indenter for HM Vice, max. 100 mm groove width Thin plate holder, max. specimen thickness 5 mm Wire holder horizontal Ø 0,4 3 mm Wire/ball holder vertical Ø 0,4 3 mm Special vice, swiveling groove width 37 mm, Horizontal: ± 25, Vertical: ± Universal specimen holder up to 30 mm Rotary table 1 scale graduation Rotary universal specimen holder max. workpiece height 30 mm max. workpiece Ø 38 mm Adjustable thin plate holder, max. sheet metal thickness 3 mm max. sheet metal thickness 56 mm D Statistical printer DP-1 VR Signal line for DP-1 VR * Installation through Mitutoyo engineer necessary. ** Device with test certificate for Knoop only available as option. Further certified hardness comparison plates on request! for expansion and optimization D CCD video camera with external screen CCD video camera for connection to a computer and VL-Pak evaluation software D* Automatic XY table * Auto-focus unit to enhance the XY table * based on

12 Standard accessories x Objective 19BAA060 Diamond indenter Flat table Ø 64 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, 90 19BAA219 D Lamp built-in 19BAA110 Dust protection cover 19BAA016 Hardness testing block (720 HV 10) Vickers table Level Hardness Tester VICKERS Type AVK The basic Vickers hardness testing machine cost-efficient and simple! Measurement of diagonals using an analog measuring microscope and reading of hardness values from the external Vickers chart. Series BAA060MPA Diamond indenter (incl. MPA certificate) Round table Ø 180 mm Round table Ø 250 mm Vice (max. groove width 100 mm) Further hardness testing blocks and upgrade kits for Brinell testing on request D Request our detailed brochure! Model AVK C0 No D Test force (N) 9,807; 49,03; 98,07; 196,1; 294,2; 490,3 Loading process automatic (loading, duration, unloading) Effective period 5 to 30 sec (in 5 sec increments) Objective 10 x Magnification 100 x Min. resolution 1 µm Max. workpiece size height 205 mm / depth 165 mm (from center of the indenter shaft) Observation by micrometer eyepiece Power supply 230 V, 50 Hz Dimensions (W x H x D) 200 x 705 x 600 mm Mass 50 kg 431

13 Hardness Tester VICKERS + Brinell Type HV Hardness Tester according to DIN EN ISO The motive revolver enables switchovers between penetrator and objectives via the display unit. The display unit is separate from the test machine itself to allow ergonomic and user-friendly operation. All major functions can be performed using the simple, intuitive touch screen. Use of 2 objectives for measurement. Simple and rapid statistical analysis of measuring results. Series 810 Standard accessories x Objective x Objective 19BAA060 Diamond indenter Flat table Ø 64 mm V-anvil Ø 40 mm, groove width 30 mm, V-anvil Ø 40 mm, groove width 6 mm, 90 19BAA219 Halogen lamp (6 V/20 W), built-in 19BAA016 Hardness testing block (720 HV 10) 19BAA110 Dust protection cover D HV 112 / HV 114 Model HV 112 / HV 114 Touch screen operation Reading of diagonals D1 and D2 Reading of hardness values Test conditions such as test force or effective period Tolerance evaluation Measurement value compensation when measuring cylindrical or spherical surfaces Automatic lens changer control Conversion into other hardness scales Soft: HV, HK, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N Statistical functions Number of values, max., min., average value, range, upper limit, lower limit, standard deviation, number of OK/Not OK evaluations, storage and editing of 256 values Model HV 112 HV 114 No D D Test force (N) 1,961; 2,942; 4,903; 9,807; 24,51; 49,03; 98,07; 196,1 9,807; 19,61; 29,42; 49,03; 98,07; 196,1; 294,2; 490,3 Loading process automatic (loading, duration, unloading) Effective period 5 99 sec (in 1 sec increments) Lens system 20 x, 10 x Lens system switch motor driven Magnification 200 x, 100 x Min. resolution 0,1 µm Max. workpiece size height 210 mm / depth 170 mm (from center of the indenter shaft) Observation by Micrometer eyepiecer Display LCD Touch screen Data output RS-232 C / Centronics / DIGIMATIC Dimensions (W x D x H) Main unit: 245 x 515 x 840 mm Mass Main unit: 57 kg 19BAA060MPA Diamond indenter (incl. MPA certificate) x Objective* x Objective* * Installation by Mitutoyo 19BAA063 Knoop diamond indenter XY table 50 x 50 mm, Table dimensions 125 x 125 mm Vice, max. 45 mm groove width Vice, max. 100 mm groove width Round table Ø 180 mm Round table Ø 250 mm 19BAA445 Camera-Adapter for CCD-camera Brinell hardness testing: Special inquiry Further certified hardness comparison plates on request. Devices with external monitor for measuring diagonals: HV-113 and HV-115 on request. Software with camera for measuring and evaluation on request. 432

14 Hardness Tester Brinell ABK 1 ABK-1 is a hardness testing machine that is easy to operate and extremely accurate. It is used for testing raw materials, cast/forged parts and special steel. A large indentation can create a smooth surface even when measuring rough surfaces. The handle for vertical table movement uses an axial thrust bearing to ensure smooth and even upward and downward movements. The distribution of the weight ensures that test forces of between 4903 N (500 kgf) and N (3000 kgf) can be applied. Two different sized carbide penetrators (10 mm and 5 mm) can be used, depending on the sample. Series 810 Standard accessories Weight for 4903 N (500 Kgf) (1 pce.) Weight for 2452 N (250 Kgf) (2 pairs) Weight for 9807 N (1000 Kgf) (2 pairs) Carbide ball Ø 5 mm (1 pce.) Carbide ball Ø 10 mm (1 pce.) Flat table Ø 68 mm (1 pce.) V-anvil (1 pce.) Microscope 20 x (1 pce.) Dust protection cover Brinell hardness table 19BAA162 Replacement carbide ball indenter Ø 5 mm (1 pce.) 19BAA163 Replacement carbide ball indenter Ø 10 mm (1 pce.) 19BAA166 D Hardness testing block 200 HB Request our detailed brochure! Model ABK 1 No Test force N 4903, 7355, 9807, 14710, 19614, 24517, Kgf 500, 750, 1000, 1500, 2000, 2500, 3000 Change of test force manual (weight exchange) Load process manual (load, dwell, unload) Max. workpiece height 200 mm Max. workpiece depth 155 mm Dimensions (W x D x H) 430 x 510 x 1100 mm Mass approx. 180 kg 433

15 Portable Hardness Tester Shore Testing of rubber, elastomers and plastics. Series 811 Analog type Long leg and compact design Shore hardness A and D Shore A Hardness scale range: Shore A Measuring range: Shore A Shore D Hardness scale range: Shore D Measuring range: Shore D Measuring stand for Measuring stand for Measuring stand for Measuring stand for AAA964 Test probe set (rubber) Hardness 30, 60, 90 Shore A 64AAA590 Test probe set (rubber) Hardness 20, 40, 80 Shore D Additional optional accessory on request. Measuring stand for different applications For the hardness measurement. To the examination of the spring action of the master unit Long leg design Compact design No Materials to be tested regular rubber soft plastic hard rubber hard plastic regular rubber soft plastic hard rubber hard plastic Shore hardness A D A D Standard JIS K 7215, JIS K 6253, ISO 868, ISO 7619, ASTM D 2240 Tip form Cut cone Cone Cut cone Cone Tip radius 0,1 ± 0,012 mm 0,1 ± 0,012 mm Tip diameter Ø 0,79 mm Ø 0,79 mm Graduation 1 degree / dial with maximum pointer Pressure plan form Ø 18 mm Ø 18 mm Mass 320 g 300 g One Unit 3 applications 64AAA964 1) Hardness testing 2) Testing the spring action 3) Manual measurement 434

16 Functions Series 811 Data output ON / OFF DATA / HOLD ZERO setting Portable Hardness Tester Shore Testing of rubber, elastomers and plastics. Shore A Hardness scale range: Shore A Measuring range: Shore A Shore D Hardness scale range: Shore D Measuring range: Shore D Series 811 Digital type Long leg and compact design Shore hardness A and D Signal cable (1 m) Signal cable (2 m) 19BAA406 Data processor (printer) Measuring stand for Measuring stand for Measuring stand for Measuring stand for AAA964 Test probe set (rubber) Hardness 30, 60, 90 Shore A 64AAA590 Test probe set (rubber) Hardness 20, 40, 80 Shore D Additional optional accessory on request Long leg design Compact design No Materials to be tested regular rubber soft plastic hard rubber hard plastic regular rubber soft plastic hard rubber hard plastic Shore hardness A D A D Standard JIS K 7215, JIS K 6253, ISO 868, ISO 7619, ASTM D 2240 Tip form Cut cone Cone Cut cone Cone Resolution 0,5 degree / Digital display with HOLD function and DIGIMATIC output Pressure plan form Ø 18 mm Ø 18 mm Mass 310 g approx. 290 g Request our detailed brochure! 64AAA

17 HARDMATIC HH 411 Portable Hardness Testing Devices The HARDMATIC HH 411 is a light-weight portable hardness testing instrument for metal workpieces. It works on the rebound hardness principle (standardised according to ASTM A 956). Measurement is conducted with hardness value L (Leeb-value), however, conversion to any desired hardness scale can be performed. In addition the display automatically shows OK/NG with the tolerance function set and selected. Memory function for 1800 measured values. Automatic measuring direction angle-compensation of the given angle. Series 810 Digital type Model HH 411 No Hardness value Hardness L (Leeb) Impacter Carbide ball type D Functions Conversion range Rockwell C 19.3 HRC 68.2 HRC Rockwell B 13.5 HRB HRB Vickers 43 HV 950 HV Shore 13.2 HS 99.3 HS Tensile strength MPa Brinell HB Automatic compensation for impact or test direction, tolerance evaluation, Offset values, data storage 1800 measured values, Statistical analysis (average value, max. value, min. value, standard deviation), Internal counter for measurements carried out Data output RS-232 C / DIGIMATIC Power supply AC-Adapter or battery LR6 (2 pcs.) Dimensions Ø 28 x 175 mm (Measuring unit) / 70 x 110 x 35 mm (Display unit) Mass 120 g (Measuring unit) / 200 g (Display unit) Surface roughness and minimum depth/mass of workpiece 1) Surface The workpiece surface should be Ra 2 µm or less. 2) Minimum depth/mass Minimum depth has to be at least 5 mm, minimum mass at least 5 kg; workpieces with other characteristic may be measured after certain preparation (i.e. mounting on granite plate). Standard accessories Main unit (impact device) 19BAA Valuation unit 19BAA457 Carbide ball indenter 19BAA451 Support ring Ø 22 mm Battery (2 pcs.) 19BAA258 Cleaning brush 19BAA452 Support ring Ø 14 mm 19BAA265 Hardness testing block HLD 800 Plastic case 19BAA460 Detector cable Sample application Request our detailed brochure! 436

18 HARDMATIC HH 411 Portable Hardness Testing Devices Wide range of detectors. In addition to the standard universal hydraulic impactor (type D), users can choose from a wide range of special hydraulic impactors for special measuring tasks. Type DC: for confined spaces, e.g. measuring in pipes. Type D+15: narrow design for measuring in grooves. Type DL: for measurements in the tightest ranges, such as welded seams or gear wheels D DIGIMATIC miniprocessor DP-1 VR DIGIMATC Signal cable (1 m) 09EAA069D Printing roll for DP-1 VR 19BAA238 RS-232 C Signal cable D AC-Adapter 19BAA243 Hardness testing block 880HLD (Ø 115 mm, t 33 mm, 3,7 kg) 19BAA244 Hardness testing block 830HLD (Ø 115 mm, t 33 mm, 3,7 kg) 19BAA245 Hardness testing block 730HLD (Ø 115 mm, t 33 mm, 3,7 kg) 19BAA246 Hardness testing block 620HLD (Ø 115 mm, t 33 mm, 3,7 kg) 19BAA247 Hardness testing block 520HLD (Ø 115 mm, t 33 mm, 3,7 kg) 19BAA248 Cylinder support ring For measuring convex cylindrical surfaces (R10 to 20 mm): for types D and DC 19BAA249 Hollow cylinder support ring For measuring convex cylindrical surfaces (R14 to 20 mm): for types D and DC 19BAA250 Spherical support ring For measuring convex spherical surfaces (R10 to 27.5 mm): for types D and DC 19BAA251 Support ring for hollow sphere For measuring convex spherical surfaces (R13.5 to 20 mm): for types D and DC 19BAA457 Carbide ball For types D, DC and D+15 19BAA458 Impact device for type DL UD-411 detector Type D approx. Ø 28 x 175 mm, approx. 120 g (Support ring Ø 22 mm) UD-412 detector Type DC approx. Ø 22 x 85 mm, approx. 50 g (Support ring Ø 22 mm) UD-413 detector Type D+15 approx. Ø 28 x 190 mm, approx. 130 g (Support ring Ø 11 mm) UD-414 detector Type DL approx. Ø 28 x 230 mm, approx. 140 g (Support ring Ø 4 mm) Sample applications : UD-412 Application: Suitable for measuring the inside walls of cylinders. The impact device is short and therefore guarantees the requisite stability at the measuring position : UD-413 Application: Suitable for measuring in narrow grooves : UD-414 Application: Suitable for measuring grooves and gaps as found on gear wheels and welded corners