In the name of GOD, Most Gracious Most Merciful

Transcription

1 In the name of GOD, Most Gracious Most Merciful Curriculum Vitae Dr. Behzad Tolaminejad Assistant Professor Department of Metallurgy and Materials Engineering Personal Details Name: Behzad Date of Birth: August 25, 1977 Surname: Tolaminejad A. Sabet Place of Birth: Tehran Degree: Ph.D. Nationality: Iranian Educational Background Ph.D.: 2011, School of Metallurgy and Materials Engineering, University of Science & Technology. Dissertation: Theoretical and experimental investigation of deformation behavior of laminated composites during ECAE process M.Sc.: 2004, School of Metallurgy and Materials Engineering, University of Science & Technology. Dissertation: An investigation into the effects of thickness, roughness and grain size of surface layers on the roll welding strength of brass steel brass composites B.Sc.: 2001, Department of Mining & Metallurgical Engineering, University of Polytechnic. Dissertation: Design and manufacturing of a laboratory powders pressing apparatus Diploma: 1995, Mathematics and Physics, Alborz Grand High School.

2 Contacts Office: Faculty of Engineering, Department of Materials Engineering & Metallurgy, University of Kashan (U. K.), 1th floor, Room 212 Phone (work): +98 (361) E- mail: Postal Code: Homepage: Academic Interests Bulk Nanostructured Materials - SPD Solid State Welding - Laminated Composites Constitutive Equation Modeling Crystallographic Texture - Grain Boundary Eng. Metal Forming Analysis and Workability Fracture Mechanics and Failure Analysis Thermo-mechanical Treatments Biographical Sketch Dr. Behzad Tolaminejad was born in Tehran in He received his bachelors degree in metallurgy (iron & steel) from university of tehran polytechnic (Amirkabir university of technology-aut), department of mining & metallurgical engineering in He pursued his education at Iran university of science & technology (IUST) and received his master in selection and characterization of materials in Dr. Tolaminejad holds Ph.D. (2011; with collaboration with Sharif university of technology- Prof. Karimi taheri) in materials science and engineering from IUST. Then he became an assistant professor in the faculty of mechanical engineering, University of Kashan (U.K.) from He established the department of materials engineering and metallurgy in november Dr. Tolaminejad collaborates with institute of nanoscience & technology (INST) at University of Kashan. His research focuses on the bulk nanostructured materials, solid state welding, theoretical and experimental analyses of material behavior in different forming processes and microstructural-textural characterization of metals.

3 Courses Thought (BSc) Metal Forming Metallurgy of Welding Materials Science. Powder Metallurgy Industrial Metals and Alloys Fundamental of Materials Eng. Mechanical Properties of Materials (MSc) Dislocation Theory Creep Composites Fracture and Fatigue of Mater. Society Membership Iranian Society of Surface Science & Technology (ISSST) Iranian Corrosion Association (ICS) The Iranian Society of Metallurgical Engineers (ISME) Iranian Foundrymen Society (IFS) Iron and Steel Society of Iran (ISSI) Iranian Nano-tech. Society (INT) Honors and distinctions The second-best student grade point at M.Sc. Degree. Standing first in the university Ph.D. entrance examination. Selected by ISI as hot paper - international journal of minerals, metallurgy and materials, Reviewer of journals of alloys and compounds, materials engineering and scientia iranica. Founder of the department of materials science and engineering at University of Kashan.

4 Computer and Language Skills Knowledge of Ansys, Origin, Matlab and Maple. X pert (XRD patterns analyzer software). English: very good in verbal and written communication. MCHE and TOLIMO. Clemex (Microscopic image analyzer). Some Recent Publications National & International Journal Papers B. Tolaminejad and K. Dehghani, Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion, Materials and Design, 2012, Vol. 34, pp (ISI). B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, Development of crystallographic texture and grain refinement in the aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion, International Journal of Modern Physics, 2012, Vol. 5, pp (ISI). B. Tolaminejad, F. Brisset and T. Baudin, EBSD study of the microstructure evolution in a commercially pure aluminum severely deformed by ECAP, Materials Science and Engineering, 2012, Vol. 32, (ISI). B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, A kinematical dislocation based model and admissible velocity field for prediction of nanostructural changes and mechanical properties of Al- Cu-Al laminated composite during ECAE process, Materials and Metallurgy Engineering, 2010, No. 1, pp (ISC). H. Arabi, S. H. Seyedein and B. Tolaminejad, Mathematical modeling and simulation of the interface region of a tri-layer composite materials, Brass-Steel-Brass, produced by cold rolling, International Journal of Minerals, Metallurgy and Materials, 2009, Vol. 16, No. 2, pp (ISI). B. Tolaminejad and H. Arabi, Effect of chromizing on bonding mechanism of a sheet composite of brass-steel-brass, Kuwait Journal of Science and Engineering, 2009, Vol. 36, No. 2B, pp (ISI).

5 B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite, Iranian Journal of Materials Science & Engineering, 2009, Vol. 6, No. 4, pp (ISI). B. Tolaminejad and H. Arabi, A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer, Iranian Journal of Science & Technology, Transaction B, Engineering, 2008, Vol. 32, No. B6, pp (ISI). B. Tolaminejad and H. Omidvar, A study of sintering effect on the properties of tungsten WHA alloys, Journal of Materials Engineering- Majlesi, 2010, No. 4, pp /persian. B. Tolaminejad, An introduction into the severe plastic deformation, ECAP: Effects on nanostructure and mechanical properties, Materials World, 2010, No. 7, pp /persian. B. Tolaminejad, H. Arabi, M. Shahmiri and A. Karimi Taheri, A primarily study on the deformation parameters and weldability model of aluminum-copper composites during ECAP process, Journal of Materials Engineering- Majlesi, 2009, No. 3, pp /persian. B. Tolaminejad, Evaluation of fuel clad condition during LOCA in the heart of nuclear reactor, Mechanical Engineering Journal, 2009, No. 58, pp /persian. B. Tolaminejad, Modeling and evaluation of the change in dynamic contact angle and morphology of explosive welding interface, Mechanical Engineering Journal, 2009, No. 57, pp /persian. V. Amirjahadi, B. Tolaminejad and A. Shokouhfar, An investigation and prediction of young modulus of single wall carbon nanotubes using artificial neural network, Nano Space, 2008, No. 15, pp /persian. B. Tolaminejad, Hydrogen storage in metals, Mechanical Engineering Journal, 2007, No. 46, pp /persian.

6 B. Tolaminejad, A new generation of automobile exhaust catalysts, Mechanical Engineering Journal, 2007, No. 49, pp /persian. B. Tolaminejad, Effect of grain size reduction on the binary diagrams of nano-structured materials, Nano Space, 2007, No. 5, pp. 7-13/persian. B. Tolaminejad, Novel pipe steels for oil and gas, Mechanical Engineering Journal, 2006, No. 43, pp /persian. B. Tolaminejad, Superplasticity, Mechanical Engineering Journal, 2006, No. 44, pp /persian. B. Tolaminejad, H. Arabi and A. Mehryab, An investigation into the bonding mechanisms of MS90- St13-MS90 tri-layer composite during cold roll welding, Welding Engineering Journal, 2005, No. 20, pp /persian. Some National & International Conference Papers. M. M. Hoseini Athar, B. Tolaminejad, Experimental and theoretical analyses of deformation during the rolling process of explosive-welded tri-layer strips, Iran International Aluminum Conference (IIAC 2014), May M. M. Hoseini Athar, B. Tolaminejad, Investigations of the hierarchical microstructure of aluminum-copper explosive joints, 3 rd International Engineering Materials & Metallurgy Conference (imat 2014), Nov M. M. Hoseini Athar, B. Tolaminejad, Interface characterization of Al/Cu/Al tri-layer composites after explosive cladding and rolling process, 4 th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Dec B. Tolaminejad, A. Karimi Taheri and H. Arabi, A new scheme to enhance strain distribution and nanostructural homogeneity for ECA-extruded copper, 4 th International Congress on Nanoscience & Nanotechnoloy (ICNN2012), University of Kashan, Sept

7 B. Tolaminejad, A. Karimi Taheri and M. Shahmiri, Equal channel angular pressing of Al-Cu-Al laminated composites: Nanostructure and mechanical properties, 4th International Congress on Nanoscience & Nanotechnoloy (ICNN2012), University of Kashan, Sept F. Brisset, T. Baudin and B. Tolaminejad, Microstructure evolution in an aluminum 1050 alloy deformed by equal angular extrusion, 12th European Modern Developments and Applications in Microbeam Analysis (EMAS-France), May B. Tolaminejad, T. Baudin and F. Brisset, EBSD study on the microstructure evolution in an aluminum alloy severely deformed by ECAP, International Microscoy Congress (IMC17), Rio de Janeiro- Brazil, Sept B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite, Iran International Aluminum Conference (IIAC 2009), April B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, Development of crystallographic texture and grain refinement in aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion, 2nd International Conference on Ultrafine grained & Nanostructured Materials, University of Tehran, Nov H. Omidvar, K. Azari and B. Tolaminejad, A Pilot design of magnesium matrix composite reinforced by steel wire, 2nd National Manufacturing Engineering Conference, Nov. 2009, Islamic Azad University of Najafabad. K. Azari, B. Tolaminejad and H. Omidvar, The application of Taguchi method in the evaluation of weight, vibration and curing parameters in E-glass/epoxy composites produced by filament winding, 11th Annual Congress of Iranian Society of Metallurgical Engineers, Oct. 2007, Isfahan University of Technology. B. Tolaminejad and M. Shahmiri, Effects of Co binder content and heat treatment on the microstructure and mechanical properties of WC-Co cermets,8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, 2007.

8 B. Tolaminejad, H. Arabi, An investigation into the bonding mechanisms and mathematical modeling of MS90-St13 bimetal using hard chromium coating as interlayer,8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, Study of ECAE process on the microstructural and mechanical behavior of middle layer in Al/Cu/Al composites, 4th Conference on Materials and Metals Forming (MATFORM'87), Sharif University of Technology, Apr B. Tolaminejad, H. Arabi and M. Mohri, Evaluation of effective parameters and mathematical modeling for roll welding of brass MS90(CDA22000), 10th Annual Congress of Iranian Society of Metallurgical Engineers, Nov. 2006, Ferdowsi University of Mashhad. M. Mohri, M. Goodarzi and B. Tolaminejad, Effect of mechanical alloying on the reduction of iron oxide from ilmenite in the presence of graphite, 10th Annual Congress of Iranian Society of Metallurgical Engineers, Nov. 2006, Ferdowsi University of Mashhad. B. Tolaminejad, Simulation and control of heat treatment furnace, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Sept. 2005, Islamic Azad University of Yazd. B. Tolaminejad, The role of microalloy elements during hot deformation of steel, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Sept. 2005, Islamic Azad University of Yazd. B. Tolaminejad, A. Mehryab and H. Arabi, An interface physical - computerized model in roll welding brass-steel- brass Composite, 9th Annual Congress of Iranian Society of Metallurgical Engineers, Nov. 2005, Shiraz University. Books under Publication. Elementary Dislocation Theory. Introduction to Texture Analysis. Strengthening Mechanisms in Crystals

9 Academic Activities : Teaching Assistant, Department of Mining and Metallurgy, AmirKabir University of Technology (AUT), Tehran, Iran : Teaching Assistant, School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, Iran / : Lecturer (Part Time), Department of Metallurgy, Azad University, Saveh Branch, Iran : Lecturer (Part Time), Department of Metallurgy, University of Kerman, Iran : Lecturer (Part Time), Department of Metallurgy, Azad University, Karaj Branch, Iran now: Faculty Member, Department of Materials Engineering and Metallurgy, University of Kashan (U.K.), Iran. Professional Experiences 7 years in industries, from 2003 till 2010, consultant in ferrous and non-ferrous metals production, R&D Center. Wide-range of experiences in the areas of rolling, extrusion, SPD processing, welding, laminated composites, electron microscopes, texture and preferred orientations.