S U B M I T T A L T R A N S M I T A L

Transcription

1 3679 S Huron Street, Suite 404 Englewood, Colorado Phone: (303) FAX: (303) S U B M I T T A L T R A N S M I T A L PROJECT: ENGINEER: OWNER: CONTRACTOR: Harold Thompson Regional WRF Birdsall Rd. Fountain, CO Job No GMS, Inc. 611 No. Weber St., #300 Colorado Springs, CO Roger Sams Lower Fountain Metropolitan Sewage Disposal District 901 S. Santa Fe Ave. Fountain, CO James Heckman Municipal Valve Co W Colfax Ave, #105 Golden, CO June 26, 2012 Submittal No: SUBJECT: Submittal for Resilient Seated Butterfly Valve, AWWA Butterfly Valve, Eccentric Plug Valve SPEC SECTION: Valves and Accessories PREVIOUS SUBMISSION DATES: DEVIATIONS FROM SPEC: YES X NO CONTRACTOR S STAMP: This submittal has been reviewed by Weaver Construction Management and, unless indicated otherwise, has been found to be in conformance with the intent of the contract documents. Contractor s Stamp: Engineer s Stamp: Date: 6/26/12 Reviewed by: Leslie Brown ( X ) Reviewed Without Comments ( ) Reviewed With Comments ENGINEER S COMMENTS:

2

3

4 June 18, 2012 APPROVAL DRAWINGS PROJECT NAME FOUNTAIN VALLEY PURCHASE ORDER TO FOLLOW VALVE TYPE RESILIENT SEATED BUTTERFLY VALVE AWWA BUTTERFLY VALVE ECCENTRIC PLUG VALVE CONTRACTOR: LOCAL SUPPLIER: MANUFACTURER: WEAVER GENERAL CONSTRUCTION 3679 S. HURON STREET ENGLEWOOD, CO MUNICIPAL VALVE CO W COLFAX AVE GOLDEN, CO DeZURIK 250 RIVERSIDE AVE NORTH SARTELL, MN (320) Factory Work Order Factory Sales Order

5 TABLE OF CONTENTS A Data Sheet is included for each line item on the purchase order. Document numbers are listed at the bottom of the Data Sheet. Any one drawing may apply to more than one item number. All documents are assembled in alpha/numeric order within each section, DATA SHEETS Data Sheets INSTALLATION DRAWINGS Dimensional Drawings CROSS SECTION DRAWINGS Cross Section/Parts List Drawings Basic Valve Materials of Construction

6 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO BOS,6,CL,L1,CI,EPDM,EPDM,DI-S4*LT Style BOS DeZURIK RESILIENT SEATED BUTTERFLY VALVE Size 6 6 Inch Body Style CL Center Line Seat End Connection L1 Lugged Drilling; ANSI 125/150 Body Material CI Cast Iron Seat Type EPDM Terpolymer of Ethylene Propylene & A Diene; Temperature -30 to +250 Deg. F. (-35 to +121 C.) Shaft Seal EPDM Terpolymer of Ethylene Propylene & A Diene; Temperature -30 to +250 Deg. F. (-35 to +121 C.) Disc DI Ductile Iron, Nickel Plated Shaft S4 416 Stainless Steel Coating 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type LT Lever; Ten Position RELATED DOCUMENTS A57807 DWG INST BOS CL L1 LT 1.5-6" A57805 DWG VALVE ASSY BOS-CL L A57859 DWG ACT LT BOS-CL

7 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. ITEM Cust. ITEM QTY DESCRIPTION PART NO BAW,6,F1,CI,NBRN-NBR,150B,CI-S1,1304G0*MS-3-HD8 Style BAW DeZURIK AWWA C504 Rubber-Seated Butterfly Valve Size 6 6 Inch End Connection F1 Flanged, Drilled to ANSI B16.1 Class 125/150 Body Material CI Cast Iron, ASTM A126 Class B Packing NBRN NBR (Acrylonitrile-Butadiene), Self-Adjusting Multiple V-Ring; -20 to 180 F (-29 to 82 C) Seat Material NBR NBR (Acrylonitrile-Butadiene); -20 to 180 F (-29 to 82 C) Service Class 150B AWWA Class 150B Disc CI Cast Iron, ASTM A48 Class 40C Type 316 Stainless Steel Seating Edge (3" - 20" =ASTM A276, 24" and larger - ASTM A240) Shaft S1 304 Stainless Steel, ASTM A276 Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type MS-3-HD8 M-Series Scotch Yoke with Handwheel Operator RELATED DOCUMENTS A40989 DWG INST BAW F1 MB/MS-3-HD 3-1 A47532 DWG INST VALVE BAW F1 3-20" A47525 DWG VALVE ASSY BAW F 3-12" A40104 DWG ACT MS/MB-3/7-HD/N BAW

8 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. ITEM Cust. ITEM QTY DESCRIPTION PART NO BAW,3,F1,CI,NBRN-NBR,150B,CI-S1,1304G0*MS-3-HD8 Style BAW DeZURIK AWWA C504 Rubber-Seated Butterfly Valve Size 3 3 Inch End Connection F1 Flanged, Drilled to ANSI B16.1 Class 125/150 Body Material CI Cast Iron, ASTM A126 Class B Packing NBRN NBR (Acrylonitrile-Butadiene), Self-Adjusting Multiple V-Ring; -20 to 180 F (-29 to 82 C) Seat Material NBR NBR (Acrylonitrile-Butadiene); -20 to 180 F (-29 to 82 C) Service Class 150B AWWA Class 150B Disc CI Cast Iron, ASTM A48 Class 40C Type 316 Stainless Steel Seating Edge (3" - 20" =ASTM A276, 24" and larger - ASTM A240) Shaft S1 304 Stainless Steel, ASTM A276 Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type MS-3-HD8 M-Series Scotch Yoke with Handwheel Operator RELATED DOCUMENTS A40989 DWG INST BAW F1 MB/MS-3-HD 3-1 A47532 DWG INST VALVE BAW F1 3-20" A47525 DWG VALVE ASSY BAW F 3-12" A40104 DWG ACT MS/MB-3/7-HD/N BAW

9 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,4,F1,CI,NBR,CR,1304G0*GS-6-HD8 Style PEC Eccentric Plug Valve, Rectangular Port Size 4 4 Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection F1 Flanged, Drilled to ANSI Class 125/150 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type GS-6-HD8 G-Series Gear with Handwheel Operator RELATED DOCUMENTS A46423 DWG INST PEC F GR1 GS-6-HD 4-1 A20730 DWG VALVE ASSY PEC F " A22553 DWG ACT GS-6-HD/CW/N & GS-12-H

10 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,6,F1,CI,NBR,CR,1304G0*GS-6-HD8 Style PEC Eccentric Plug Valve, Rectangular Port Size 6 6 Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection F1 Flanged, Drilled to ANSI Class 125/150 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type GS-6-HD8 G-Series Gear with Handwheel Operator RELATED DOCUMENTS A46423 DWG INST PEC F GR1 GS-6-HD 4-1 A20730 DWG VALVE ASSY PEC F " A22553 DWG ACT GS-6-HD/CW/N & GS-12-H

11 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,10,F1,CI,NBR,CR,1304G0*GS-6-HD8 Style PEC Eccentric Plug Valve, Rectangular Port Size Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection F1 Flanged, Drilled to ANSI Class 125/150 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type GS-6-HD8 G-Series Gear with Handwheel Operator RELATED DOCUMENTS A46423 DWG INST PEC F GR1 GS-6-HD 4-1 A20730 DWG VALVE ASSY PEC F " A22553 DWG ACT GS-6-HD/CW/N & GS-12-H

12 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,10,MJ,CI,NBR,CR,1302B0*GB-6-N Style PEC Eccentric Plug Valve, Rectangular Port Size Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection MJ Mechanical Joint, Conforms to ANSI/AWWA C111/A21.11 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1302B0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 4 mils minimum of Black Asphalt Varnish on Exterior with Standard (SP10) surface prep Act Type GB-6-N G-Series Buriable Worm Gear with 2 Inch Square Nut Operator RELATED DOCUMENTS A46408 DWG INST PEC MJ GR1 GB-6-N 4-1 A22430 DWG VALVE ASSY PEC MJ 4-20" A22555 DWG ACT GB-6-HD/N & GB-12-HD/N

13 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,4,F1,CI,NBR,CR,1304G0*GS-6-CW8 Style PEC Eccentric Plug Valve, Rectangular Port Size 4 4 Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection F1 Flanged, Drilled to ANSI Class 125/150 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type GS-6-CW8 G-Series Gear with Chainwheel Operator RELATED DOCUMENTS A53708 DWG INST PEC F GR1 GS-6-CW 4-1 A20730 DWG VALVE ASSY PEC F " A22553 DWG ACT GS-6-HD/CW/N & GS-12-H

14 Submittal Data Sheet Date: 06/18/12 WEAVER GENERAL CONSTRUCTION P.O. TO FOLLOW FACTORY ORDER NO S. HURON STREET FACTORY SALES ORDER NO SUITE 404 REV 0 ENGLEWOOD, CO PROJ. NAME FOUNTAIN VALLEY Fact. Cust. ITEM ITEM QTY DESCRIPTION PART NO PEC,6,F1,CI,NBR,CR,1304G0*GS-6-CW8 Style PEC Eccentric Plug Valve, Rectangular Port Size 6 6 Inch (Standard Port), Stainless Steel Bearings, Welded-In Nickel Seat (Except Rubber Lined or Stainless Steel Bodies) End Connection F1 Flanged, Drilled to ANSI Class 125/150 Body Material CI Cast Iron, ASTM A126, Class B Packing NBR Acrylonitrile-Butadiene Reinforced, Multiple V-Ring with External Adjustment, -20 to 250 Degree F. (-29 to 121 Degree C.) Plug Facing CR Chloroprene; -20 to 180 F (-29 to 83 C) Temp. Rating 180 degrees F. Pressure Rating 175 psig Coating 1304G0 8 mils minimum of Blue Epoxy Tnemec 141 (NSF Std. 61) on Interior with Standard (SP10) surface prep and 3 mils minimum of Blue Enamel on Exterior with Standard (SP10) surface prep Act Type GS-6-CW8 G-Series Gear with Chainwheel Operator RELATED DOCUMENTS A53708 DWG INST PEC F GR1 GS-6-CW 4-1 A20730 DWG VALVE ASSY PEC F " A22553 DWG ACT GS-6-HD/CW/N & GS-12-H

15

16

17

18

19

20 VALVE SIZE DIMENSIONS IN [MM] IN MM A B C D E F G 1-1/ /2-13 UNC [33] [148] [75] [140] [11] [98] /8-11 UNC [43] [159] [80] [161] [13] [121] 2-1/ /8-11 UNC [46] [179] [89] [175] [13] [140] /8-11 UNC [46] [190] [95] [181] [13] [152] /8-11 UNC [52] [221] [114] [200] [13] [191] /4-10 UNC [56] [252] [127] [213] [13] [216] /4-10 UNC [56] [278] [140] [226] [13] [241] NOTE: A B VALVE ACTUATOR 1. DRAWING SHOWS MOUNTING HOLES FOR ANSI CLASS 125/150 FLANGES. 2. FOR FLANGES OTHER THAN ANSI STANDARD SEE D10478 FOR DIMENSIONS. 3. DO NOT USE GASKETS BETWEEN VALVE AND MATING FLANGES. 4. FLOW MAY BE IN EITHER DIRECTION. 5. LEVER WILL USE A.28[7] DIA X 2.00[51] VERTICAL X.81[21] HORIZONTAL ADJUSTABLE SHACKLE PADLOCK. DIMENSIONS ARE IN THE LOCKED POSITION. DOTTED LINES INDICATE OPTIONAL LOCKING DEVICE PROVIDED BY CUSTOMER (SEE DETAIL "A" & NOTE 5) NOTICE THIS DRAWING DOES NOT SHOW ACTUATOR ACCESSORIES. IF ACCESSORIES ARE REQUIRED, REFER TO THE APPROPRIATE ACCESSORY INSTALLATION DRAWING FOR DIMENSIONS AND OTHER RELATED INFORMATION HORIZONTAL VERTICAL DETAIL "A" LOCKING DEVICE (PROVIDED BY CUSTOMER SEE NOTE 5) B A E MOUNTING HOLES FOR PIPELINE MOUNTING "F" QTY AND SIZE OF TAPPED HOLES "G" DIA BC (ANSI STANDARD) D "B" DIA C A ACTUATOR MOUNTING POSITIONS STANDARD POSITION SHOWN ON THIS DRAWING 180 POSITION G F E D C B A /19/10 DOCT. CODE C1 DRAWN CHECKED BOS-CL BUTTERFLY VALVES SIZE 2-6 LUGGED LT 10 POSITION LEVER ACTUATOR SN CEG APPROVED DATE CEG 1/06/09 A57807

21

22 MATERIALS OF CONSTRUCTION DRAWING(S): A20730 WORK ORDER: PART NO: DESCRIPTION: PEC,6,F1,CI,NBR,CR,1304G0*GS-6-HD8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

23 MATERIALS OF CONSTRUCTION DRAWING(S): A20730 WORK ORDER: PART NO: DESCRIPTION: PEC,4,F1,CI,NBR,CR,1304G0*GS-6-HD8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

24 MATERIALS OF CONSTRUCTION DRAWING(S): A20730 WORK ORDER: PART NO: DESCRIPTION: PEC,6,F1,CI,NBR,CR,1304G0*GS-6-CW8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

25 MATERIALS OF CONSTRUCTION DRAWING(S): A20730 WORK ORDER: PART NO: DESCRIPTION: PEC,10,F1,CI,NBR,CR,1304G0*GS-6-HD8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

26 MATERIALS OF CONSTRUCTION DRAWING(S): A20730 WORK ORDER: PART NO: DESCRIPTION: PEC,4,F1,CI,NBR,CR,1304G0*GS-6-CW8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

27

28 MATERIALS OF CONSTRUCTION DRAWING(S): A22430 WORK ORDER: PART NO: DESCRIPTION: PEC,10,MJ,CI,NBR,CR,1302B0*GB-6-N ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A02 STAINLESS STEEL, TYPE 316L, SINTERED A03 CHLOROPRENE (CR) A03 IRON, ASTM A126, CLASS B A04 PTFE, TYPE II, ASTM D3294 OR D3308, GRADE 1 A05 GASKET, NON-ASBESTOS COMPRESSED SHEET GASKET MATERIAL A06 IRON, ASTM A126, CLASS B A07 STAINLESS STEEL, TYPE 316L, SINTERED A08 CARBON STEEL, ZINC PLATED A09 ACRYLONITRILE-BUTADIENE (NBR) A11 IRON, ASTM A126, CLASS B A12 CARBON STEEL, ZINC PLATED A13 CARBON STEEL, ZINC PLATED A14 STAINLESS STEEL, TYPE 302

29

30

31

32

33 MATERIALS OF CONSTRUCTION DRAWING(S): A47525 WORK ORDER: PART NO: DESCRIPTION: BAW,6,F1,CI,NBRN-NBR,150B,CI-S1,1304G0*MS-3-HD8 ITEM MATERIAL A01 IRON, ASTM A126, CLASS B A01 ACRYLONITRILE-BUTADIENE (NBR) A02 IRON, ASTM A48, CLASS 40C A03 STAINLESS STEEL, TYPE 316, ASTM A276, CONDITION A A05 STAINLESS STEEL, TYPE 304, ASTM A276, CONDITION A A06 STEEL, COLD DRAWN, AISI 1018 A07 NYLON MOLYBDENUM DISULFITE A08 ACRYLONITRILE-BUTADIENE (NBR) A10 STAINLESS STEEL, TYPE 316 A16 STEEL CARBON, SAE J403, GRADE 1008 OR 1010 A32 NYLON MOLYBDENUM DISULFITE

34 MATERIALS OF CONSTRUCTION DRAWING(S): A47525 WORK ORDER: PART NO: DESCRIPTION: BAW,3,F1,CI,NBRN-NBR,150B,CI-S1,1304G0*MS-3-HD8 ITEM MATERIAL A01 ACRYLONITRILE-BUTADIENE (NBR) A01 IRON, ASTM A126, CLASS B A02 IRON, ASTM A48, CLASS 40C A03 STAINLESS STEEL, TYPE 316, ASTM A276, CONDITION A A05 STAINLESS STEEL, TYPE 304, ASTM A276, CONDITION A A06 STEEL, COLD DRAWN, AISI 1018 A07 NYLON MOLYBDENUM DISULFITE A08 ACRYLONITRILE-BUTADIENE (NBR) A10 STAINLESS STEEL, TYPE 316 A16 STEEL CARBON, SAE J403, GRADE 1008 OR 1010 A32 NYLON MOLYBDENUM DISULFITE

35 NO DESCRIPTION QTY DETAIL B A17 A16 A7 A8 A9 A10 DETAIL SHOWING BOTTOM COVER ON 16" - 24" A18 A13 A15 A14 A1 BODY 1 A2 BEARING 2 A3 SEAT 1 A4 DISC 1 A5 SHAFT 1 A6 PIN (SIZES 1-1/2" - 4") 1 PIN (SIZES 5" - 24") 2 A7 BEARING 2 A8 O-RING 1 A9 NAMEPLATE 1 A10 DRIVE SCREW 2 A11 A12 SCREW (1-1/2" - 14") SCREW (1-1/2" - 14") 6 6 SCREW (16" - 24") SCREW (16" - 24") 8 8 A13 COVER (16" - 24") 1 A14 SCREW (16" - 24") 2 A15 LOCKWASHER (16" - 24") 2 A16 WASHER RETAINING 1 A17 RETAINING RING 1 A18 O-RING (16" - 24") 1 A19 MARKING PLATE (WHEN REQUIRED) 1 A20 DRIVE SCREW (WHEN REQUIRED) 2 NOTE: 1. WHEN ORDERING PARTS, INCLUDE VALVE SIZE AND PART NUMBER FROM DATA PLATE. ALSO INCLUDE THIS DRAWING NUMBER WITH PART NAME, NUMBER AND QUANTITY. A A19 A20 B A11 A1 A12 A6 A5 A4 A3 A2 A SECTION A-A 7/28/10 BOS-CL BUTTERFLY VALVES SIZE 1-1/2" - 24" LUGGED VALVE ASSEMBLY G F E D C B A DOCT. CODE C1 DRAWN CHECKED SN CEG APPROVED DATE CEG 1/06/09 A57805

36 MATERIALS OF CONSTRUCTION DRAWING(S): A57805 WORK ORDER: PART NO: DESCRIPTION: BOS,6,CL,L1,CI,EPDM,EPDM,DI-S4*LT ITEM MATERIAL A1 CAST IRON, ASTM A126 GRADE B A2 GLASS BACKED PTFE A3 EPDM-TERPOLYMER OF ETHYLENE PROPYLENE AND A DIENE A4 DUCTILE IRON, ASTM A536, , NICKEL PLATED A5 416 STAINLESS STEEL, ASTM A582 A6 416 STAINLESS STEEL, ASTM A582 A7 GLASS BACKED PTFE A8 EPDM-TERPOLYMER OF ETHYLENE PROPYLENE AND A DIENE A11 CARBON STEEL, ZINC PLATED A12 CARBON STEEL, ZINC PLATED A15 CARBON STEEL, ZINC PLATED A SERIES STAINLESS STEEL A17 CARBON STEEL A18 EPDM-TERPOLYMER OF ETHYLENE PROPYLENE AND A DIENE A19 STAINLESS STEEL, TYPE 316 A20 STAINLESS STEEL, TYPE 18-8

37 VERTICAL HORIZONTAL DIA NO PART NAME QTY B1 LEVER KIT 1 B2 SCREW 1 B3 NUT 4 B4 LOCKWASHER 4 B5 DATA PLATE 1 B6 DRIVE SCREW 2 B7 DIAL 1 NOTE: 1. WHEN ORDERING PARTS, INCLUDE VALVE SIZE AND PART NUMBER FROM DATA PLATE. ALSO INCLUDE THIS DRAWING NUMBER WITH PART NAME, NUMBER AND QUANTITY. 2. LEVER WILL USE A.28[7] DIA X 2.00[51] VERTICAL X.81[21] HORIZONTAL ADJUSTABLE SHACKLE PADLOCK. DIMENSIONS ARE IN THE LOCKED POSITION. DETAIL "A" LOCKING DEVICE PROVIDED BY CUSTOMER (SEE NOTE 2) B6 B5 DOTTED LINES INDICATE OPTIONAL LOCKING DEVICE PROVIDED BY CUSTOMER (SEE DETAIL "A" & NOTE 2) B1 B7.31 DIA THRU, 8 FOR LOCKING DEVICE PROVIDED BY CUSTOMER B4 B5 B2 5/13/10 LT 10 POSITION LEVER ACTUATOR WITH LK LOCKING OPTION FUW BOS-CL BUTTERFLY VALVES G F E D C B A DOCT. CODE C1 DRAWN CHECKED SN APPROVED DATE CEG CEG 12/18/08 A57859

38 RECOMMENDED LONG AND SHORT TERM STORAGE PROCEDURES LONG-TERM STORAGE 1. All resilient seated valves shall be stored in the open (unseated) position. 2. All valves with adjustable packing glands should have the packing gland loosened prior to storage. 3. Valves shall be separately packaged in a sealed polyethylene plastic enclosure with a minimum of one package of desiccant inside, dependent upon valve size. 4. Prepared valves shall be warehoused in a clean, dry, indoor facility on concrete or raised racks, with temperature ranging from 35 F to 95 F (2 C to 35 C). 5. Valves shall not be near electric motors or other equipment which may emit Ozone which can cause deterioration of elastomers used for valve and actuator components. 6. The valves shall be inspected periodically to replace the desiccant if required, and to repair any damage to the polyethylene plastic enclosures. 7. Valves with cylinder operators and control valves which are stored for extended periods may be subject to cylinder blow-by caused by permanent distortion of any of the seals. Valves should be operated prior to installation and damaged seals replaced. 8. Valves with electric motor operators shall be stored in accordance with the individual motor manufacturer's recommended long-term storage procedures in addition to Paragraphs 1, 2 and 3 above. 9. All electrical components, if applicable, should be inspected and all electrical contacts cleaned before operation. 10. Valves shall be enclosed in fully sheathed wooden crates or boxes. SHORT-TERM STORAGE 1. Valve should be protected from the weather, avoid exposure to excessive moisture or dirt. Store at temperatures ranging from 35 F to 95 F (2 C to 35 C). Form No